With the aid of multi-agent based modeling approach to complex systems, the hierarchy simulation models of carrier-based aircraft catapult launch are developed. Ocean, carrier, aircraft, and atmosphere are treated as ...With the aid of multi-agent based modeling approach to complex systems, the hierarchy simulation models of carrier-based aircraft catapult launch are developed. Ocean, carrier, aircraft, and atmosphere are treated as aggregation agents, the detailed components like catapult, landing gears, and disturbances are considered as meta-agents, which belong to their aggregation agent. Thus, the model with two layers is formed i.e. the aggregation agent layer and the meta-agent layer. The information communication among all agents is described. The meta-agents within one aggregation agent communicate with each other directly by information sharing, but the meta-agents, which belong to different aggregation agents exchange their information through the aggregation layer first, and then perceive it from the sharing environment, that is the aggregation agent. Thus, not only the hierarchy model is built, but also the environment perceived by each agent is specified. Meanwhile, the problem of balancing the independency of agent and the resource consumption brought by real-time communication within multi-agent system （MAS） is resolved. Each agent involved in carrier-based aircraft catapult launch is depicted, with considering the interaction within disturbed atmospheric environment and multiple motion bodies including carrier, aircraft, and landing gears. The models of reactive agents among them are derived based on tensors, and the perceived messages and inner frameworks of each agent are characterized. Finally, some results of a simulation instance are given. The simulation and modeling of dynamic system based on multi-agent system is of benefit to express physical concepts and logical hierarchy clearly and precisely. The system model can easily draw in kinds of other agents to achieve a precise simulation of more complex system. This modeling technique makes the complex integral dynamic equations of multibodies decompose into parallel operations of single agent, and it is convenient to expand, maintain, and reuse the program codes.展开更多
Aircraft ground movement plays a key role in improving airport efficiency,as it acts as a link to all other ground operations.Finding novel approaches to coordinate the movements of a fleet of aircraft at an airport i...Aircraft ground movement plays a key role in improving airport efficiency,as it acts as a link to all other ground operations.Finding novel approaches to coordinate the movements of a fleet of aircraft at an airport in order to improve system resilience to disruptions with increasing autonomy is at the center of many key studies for airport airside operations.Moreover,autonomous taxiing is envisioned as a key component in future digitalized airports.However,state-of-the-art routing and scheduling algorithms for airport ground movements do not consider high-fidelity aircraft models at both the proactive and reactive planning phases.The majority of such algorithms do not actively seek to optimize fuel efficiency and reduce harmful greenhouse gas emissions.This paper proposes a new approach for generating efficient four-dimensional trajectories(4DTs)on the basis of a high-fidelity aircraft model and gainscheduling control strategy.Working in conjunction with a routing and scheduling algorithm that determines the taxi route,waypoints,and time deadlines,the proposed approach generates fuel-efficient 4DTs in real time,while respecting operational constraints.The proposed approach can be used in two contexts:①as a reactive decision support tool to generate new trajectories that can resolve unprecedented events;and②as an autopilot system for both partial and fully autonomous taxiing.The proposed methodology is realistic and simple to implement.Moreover,simulation studies show that the proposed approach is capable of providing an up to 11%reduction in the fuel consumed during the taxiing of a large Boeing 747-100 jumbo jet.展开更多
The previous study on modeling of the tilt rotor aircraft used to put a premium on the complicated aerodynamic computation, and the research on the motion equations is often constrained to frequently use the oversimpl...The previous study on modeling of the tilt rotor aircraft used to put a premium on the complicated aerodynamic computation, and the research on the motion equations is often constrained to frequently use the oversimplified 6-degree of freedom （DOF） rigid body equations. However, the transfiguration of aircraft during transition stage, is complicated due to the aerodynamic interference and the change of center of gravity （CG）. Moreover, the gyroscopic moment caused by tilting the high-speed revolving rotors seriously interferes with the aircraft attitude. The above-cited 6-DOF single rigid body equations do not take the inertia coupling effects into account during transition. For this sake, the article, reckoning the body, the nacelles and the rotors to be independent entities, establishes a realistic model in the form of multi-body motion equations. First, by applying Newton＇s laws and angular momentum theorem to a mass of elements of the aircraft, the multi-body motion equations in inertial flame as well as in body frame are obtained by integrating over all elements. As the equations are of implicit nonlinear differential type, the consistent initial value problem should be solved. Then, a numerical simulation of the differential equations is conducted by means of the Runge-Kutta-Felhberg integral algorithm. The modeling and the simulation algorithm are verified against the data of XV-15 as an example. The model can be used in the area of flight dynamics, flight control and flight safety of tilt rotor air- craft.展开更多
Aircraft are profitable to their owners as long as they are in the air transporting passengers to their destinations;therefore it is vital to minimize as much as possible their preparation time on the ground.In this p...Aircraft are profitable to their owners as long as they are in the air transporting passengers to their destinations;therefore it is vital to minimize as much as possible their preparation time on the ground.In this paper we simulate different boarding strategies with the help of a model based on cellular automata parallel computational tool,attempting to find the most efficient way to deliver each passenger to her/his assigned seat.Two seat arrangements are used,a small one based on Airbus A320/ Boeing 737 and a larger one based on Airbus A380/ Boeing777-300.A wide variety of parameters,including time delay for luggage storing,the frequency by which the passengers enter the plane,different walking speeds of passengers depending on sex,age and height,and the possibility of walking past their seat,are simulated in order to achieve realistic results,as well as monitor their effects on boarding time.The simulation results indicate that the boarding time can be significantly reduced by the simple grouping and prioritizing of passengers.In accordance with previous papers and the examined strategies,the outside-in and reverse pyramid boarding methods outperform all the others for both the small and large airplane seat layout.In the latter,the examined strategies are introduced for first time in an analogous way to the initial small seat arrangement of Airbus A320/ Boeing737 aircraft family.Moreover,since in real world scenarios,the compliance of all the passengers to the suggested group division and boarding strategy cannot be guaranteed,further simulations were conducted.It is clear that as the number of passengers disregarding the priority of the boarding groups increases,the time needed for the boarding to complete tends towards that of the random boarding strategy,thus minimizing the possible advantages gained by the proposed boarding strategies.展开更多
A general mathematical model of carrier-based aircraft ski jump take-off is derived based on tensor. The carrier, the aircraft body and the movable parts of the landing gears are treated as independent entities. These...A general mathematical model of carrier-based aircraft ski jump take-off is derived based on tensor. The carrier, the aircraft body and the movable parts of the landing gears are treated as independent entities. These entities are assembled into a multi-rigid-body system with flexible links. Dynamical equations of each entity are derived on the basis of the Newton law and the Euler transformation. Using the invariance property of the tensor, the dynamical and kinematical equations are converted to tensor forms which are invariant under time-dependent coordinate transformations. Then the tensor-formed equations are expressed by the matrix operation. Differential equation group of the matrix form is formulated for the programming. The closure of the model is discussed, and the simulation results are given.展开更多
To improve the operational efficiency of global optimization in engineering, Kriging model was established to simplify the mathematical model for calculations. Ducted coaxial-rotors aircraft was taken as an example an...To improve the operational efficiency of global optimization in engineering, Kriging model was established to simplify the mathematical model for calculations. Ducted coaxial-rotors aircraft was taken as an example and Fluent software was applied to the virtual prototype simulations. Through simulation sample points, the total lift of the ducted coaxial-rotors aircraft was obtained. The Kriging model was then constructed, and the function was fitted. Improved particle swarm optimization(PSO) was also utilized for the global optimization of the Kriging model of the ducted coaxial-rotors aircraft for the determination of optimized global coordinates. Finally, the optimized results were simulated by Fluent. The results show that the Kriging model and the improved PSO algorithm significantly improve the lift performance of ducted coaxial-rotors aircraft and computer operational efficiency.展开更多
The existing full-span models of the tiltrotor aircraft adopted the rigid blade model without considering the coupling relationship among the elastic blade, wing and fuselage. To overcome the limitations of the existi...The existing full-span models of the tiltrotor aircraft adopted the rigid blade model without considering the coupling relationship among the elastic blade, wing and fuselage. To overcome the limitations of the existing full-span models and improve the precision of aeroelastic analysis of tiltrotor aircraft in forward flight, the aeroelastic stability analysis model of full-span tiltrotor aircraft in forward flight has been presented in this paper by considering the coupling among elastic blade, wing, fuselage and various components. The analytical model is validated by comparing with the calculation results and experimental data in the existing references. The influence of some structural parameters, such as the fuselage degrees of freedom, relative displacement between the hub center and the gravity center, and nacelle length, on the system stability is also investigated. The results show that the fuselage degrees of freedom decrease the critical stability velocity of tiltrotor aircraft, and the variation of the structural parameters has great influence on the system stability,and the instability form of system can change between the anti-symmetric and symmetric wing motions of vertical and chordwise bending.展开更多
The Auto-Transformer Rectifier Unit（ATRU） is one preferred solution for high-power AC/DC power conversion in aircraft. This is mainly due to its simple structure, high reliability and reduced k VA ratings. Indeed, t...The Auto-Transformer Rectifier Unit（ATRU） is one preferred solution for high-power AC/DC power conversion in aircraft. This is mainly due to its simple structure, high reliability and reduced k VA ratings. Indeed, the ATRU has become a preferred AC/DC solution to supply power to the electric environment control system on-board future aircraft. In this paper, a general modelling method for ATRUs is introduced. The developed model is based on the fact that the DC voltage and current are strongly related to the voltage and current vectors at the AC terminals of ATRUs. In this paper, we carry on our research in modelling symmetric 18-pulse ATRUs and develop a generic modelling technique. The developed generic model can study not only symmetric but also asymmetric ATRUs. An 18-pulse asymmetric ATRU is used to demonstrate the accuracy and efficiency of the developed model by comparing with corresponding detailed switching SABER models provided by our industrial partner. The functional models also allow accelerated and accurate simulations and thus enable whole-scale more-electric aircraft electrical power system studies in the future.展开更多
A time-optimal aircraft-following model is introduced to address air traffic flow interference by velocity reduction. The objective function is set up as minimizing the recovery time during which the separation minima...A time-optimal aircraft-following model is introduced to address air traffic flow interference by velocity reduction. The objective function is set up as minimizing the recovery time during which the separation minima are not infringed and the separation of the air traffic flow returns to the initial separation at the terminal time. Pontryagin＇s minimum principle is used to solve the optimum aircraft-following velocity control law. An analytical minimum safe following separation is also provided under the time-optimal control law. The simulation results show that the precision first-order tracking accuracy is achieved without losing the separation.展开更多
Researches have indicated that impinging droplets can be entrapped as liquid in the ice matrix and the temperature of accreting ice surface is below the freezing point. When liquid entrapment by ice matrix happens, th...Researches have indicated that impinging droplets can be entrapped as liquid in the ice matrix and the temperature of accreting ice surface is below the freezing point. When liquid entrapment by ice matrix happens, this kind of ice is called spongy ice. A new spongy icing model for the ice accretion problem on airfoil or aircraft has been developed to account for entrapped liquid within accreted ice and to improve the determination of the surface temperature when enter- ing clouds with supercooled droplets. Different with conventional icing model, this model identifies icing conditions in four regimes： rime, spongy without water film, spongy with water film and glaze. By using the Eulerian method based on two-phase flow theory, the impinging droplet flow was investigated numerically. The accuracy of the Eulerian method for computing the water collection efficiency was assessed, and icing shapes and surface temperature distributions predicted with this spongy icing model agree with experimental results well.展开更多
In the context of applying computer aided design tools to aircraft conceptualdesign, a sketch based approach is proposed to help designers turn their original concepts intocomplex numerical models that are usable for ...In the context of applying computer aided design tools to aircraft conceptualdesign, a sketch based approach is proposed to help designers turn their original concepts intocomplex numerical models that are usable for further analysis and optimization. This approachemphasizes the integration of general configuration and the layout of such components as engines,payloads, fuel tanks and landing gears, and the representation of a design scheme as uniform planesketches and three dimensional models. This paper presents the measures adopted to implement theapproach in a prototype system, including the object-oriented data structure, friendly graphicaluser interfaces and basic features of relevant modules. Several examples generated in the prototypeand applications of the results are finally outlined to illustrate the effectiveness of theapproach.展开更多
The riveting joint is one of the important joint methods to permanently fasten two thin-walled sheet-metal parts. It is most ba- sic to efficiently analyze and estimate the deformation of the riveting joint for the pe...The riveting joint is one of the important joint methods to permanently fasten two thin-walled sheet-metal parts. It is most ba- sic to efficiently analyze and estimate the deformation of the riveting joint for the performance, fatigue durability and damage of the riveting structure in the aircraft. This paper researches the riveting process mathematics modeling and simulating to more accurately analyze deformation of thin-walled sheet-metal parts. First, the mathematics and mechanics models for the elastic deformation, plastic deformation and springback of the rivet are built by mechanics theory. Second, on the basis of ABAQUS system, a finite element system, an instance made up of the rivet and two thin-walled sheet-metal parts of aluminum alloy is used to analyze and simulate the stress and deformation. What＇s more, a comparison is made between the results obtained by the mathematics and mechanics models and those by finite element method （FEM）. The models are proved true by the calculating and simulation results of the instance.展开更多
Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance...Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance service company are addressed. The authors developed a set of vehicle rout ings to cover each schedule flights; the objectives pursued are the maximization of vehicle and manpower utilization and minimization of operation time. To obta in the goals, an integer-programming model with genetic algorithm is formulated . It is found that the company can produce an effective and efficient schedules to deploy the manpower and equipment resources. Simulation is used to verify the method and a MATLAB program is used to code the genetic algorithm. This model i s further illustrated by a case study in Hong Kong and the benefit elaborated. F inally, a conclusion is made to summarize the experience of this project and pro vide further improvement.展开更多
To efficiently and fully utilize aircraft carrier resources,an optimization model is presented to deal with parameter matching between aircraft and carrier in the process of aircraft catapult launch.Based on carrier a...To efficiently and fully utilize aircraft carrier resources,an optimization model is presented to deal with parameter matching between aircraft and carrier in the process of aircraft catapult launch.Based on carrier aircraft longitudinal dynamic equations and theorem of kinetic energy in catapult launch course,the work characteristics of different forces are learned and a theory model of parameter matching is deduced.In view of the uncertainty of the model parameters of the theory model and the low matching accuracy of the approximate model,an optimization model of parameter matching is introduced in line with the structure of theory model and the approximate model and is generated by the proposed immune genetic algorithm.Compared with the original genetic algorithm and immune algorithm,the proposed algorithm has better calculation accuracy and convergence.The calculation results show that the optimization model occupies certain application value of engineering estimation from the comparison with the relevant literature data and has higher precision than the approximate models.The validity of the proposed approach is verified with numerical case study on a carrier based aircraft.展开更多
Excessive vibration of aircraft wings during flight is harmful and may cause propagation of existing cracks in the material, leading to catastrophic failures as a result of material fatigue. This study investigates th...Excessive vibration of aircraft wings during flight is harmful and may cause propagation of existing cracks in the material, leading to catastrophic failures as a result of material fatigue. This study investigates the variations of modal characteristics of aircraft wings with respect to changes in the structural configurations. We develop parametric Computer-Aided Design (CAD) models to capture new design intend on the aircraft wing architectures. Subsequent Finite Element Analysis (FEA) based vibration analysis is performed to study the effects of architecture changes on the wing’s natural frequencies and mode shapes. It is concluded that the spar placement and the number of ribs have significant influence on the wing’s natural vibration properties. Integrating CAD modelling and FEA vibration analysis enables designers to develop alternative wing architectures to implement design requirements in the preliminary design stage.展开更多
This paper presents an identification of a continuous-time linear aircraft model while considering control surface actuators using the maximal length sequence signal. In the identification with the actuator, the input...This paper presents an identification of a continuous-time linear aircraft model while considering control surface actuators using the maximal length sequence signal. In the identification with the actuator, the input for identification is given by the command to the actuator or the output from the actuator. In the numerical simulation of longitudinal aircraft model identification, the identification performance is improved when the bandwidth ratio for the short-period mode and the bandwidth ratio between the actuator and the short-period mode are increased. Furthermore, a few input noises bring about an improvement in the identification performance. This may be effective in the case that the performance of the actuator is not sufficiently good in practical system identification.展开更多
This paper considers the possibility of estimating continuous-time linear aircraft models by using the subspace identification The outline of the subspace identification for estimating the continuous-time linear model...This paper considers the possibility of estimating continuous-time linear aircraft models by using the subspace identification The outline of the subspace identification for estimating the continuous-time linear model is first mentioned. The identification simulation in which the subspace identification is then applied to the modeling of aircraft in the lateral motion is performed. As a result, the continuous-time linear aircraft model is appropriately estimated by the subspace identification if the amount of the measurement noise is not so much.展开更多
When modeling a stealth aircraft with low RCS（Radar Cross Section）, conventional parameter estimation methods may cause a deviation from the actual distribution, owing to the fact that the characteristic parameters ...When modeling a stealth aircraft with low RCS（Radar Cross Section）, conventional parameter estimation methods may cause a deviation from the actual distribution, owing to the fact that the characteristic parameters are estimated via directly calculating the statistics of RCS. The Bayesian–Markov Chain Monte Carlo（Bayesian-MCMC） method is introduced herein to estimate the parameters so as to improve the fitting accuracies of fluctuation models. The parameter estimations of the lognormal and the Legendre polynomial models are reformulated in the Bayesian framework. The MCMC algorithm is then adopted to calculate the parameter estimates. Numerical results show that the distribution curves obtained by the proposed method exhibit improved consistence with the actual ones, compared with those fitted by the conventional method. The fitting accuracy could be improved by no less than 25% for both fluctuation models, which implies that the Bayesian-MCMC method might be a good candidate among the optimal parameter estimation methods for stealth aircraft RCS models.展开更多
In the Windows XP 64 bit operating system environment, several common PC were used to build a cluster system, establishing the distributed memory parallel (DMP) computing system. A finite element model of whole aircra...In the Windows XP 64 bit operating system environment, several common PC were used to build a cluster system, establishing the distributed memory parallel (DMP) computing system. A finite element model of whole aircraft with about 260 million degrees of freedom (DOF) was developed using three-node and four-node thin shell element and two-node beam element. With the large commercial finite element software MSC.MARC and employing two kinds of domain decomposition method (DDM) respectively, realized the parallel solving for the static strength analysis of the whole aircraft model, which offered a high cost-effective solution for solving large-scale and complex finite element models.展开更多
基金Aeronautical Science Foundation of China (2006ZA51004)
文摘With the aid of multi-agent based modeling approach to complex systems, the hierarchy simulation models of carrier-based aircraft catapult launch are developed. Ocean, carrier, aircraft, and atmosphere are treated as aggregation agents, the detailed components like catapult, landing gears, and disturbances are considered as meta-agents, which belong to their aggregation agent. Thus, the model with two layers is formed i.e. the aggregation agent layer and the meta-agent layer. The information communication among all agents is described. The meta-agents within one aggregation agent communicate with each other directly by information sharing, but the meta-agents, which belong to different aggregation agents exchange their information through the aggregation layer first, and then perceive it from the sharing environment, that is the aggregation agent. Thus, not only the hierarchy model is built, but also the environment perceived by each agent is specified. Meanwhile, the problem of balancing the independency of agent and the resource consumption brought by real-time communication within multi-agent system （MAS） is resolved. Each agent involved in carrier-based aircraft catapult launch is depicted, with considering the interaction within disturbed atmospheric environment and multiple motion bodies including carrier, aircraft, and landing gears. The models of reactive agents among them are derived based on tensors, and the perceived messages and inner frameworks of each agent are characterized. Finally, some results of a simulation instance are given. The simulation and modeling of dynamic system based on multi-agent system is of benefit to express physical concepts and logical hierarchy clearly and precisely. The system model can easily draw in kinds of other agents to achieve a precise simulation of more complex system. This modeling technique makes the complex integral dynamic equations of multibodies decompose into parallel operations of single agent, and it is convenient to expand, maintain, and reuse the program codes.
基金This work was funded by the UK Engineering and Physical Sciences Research Council(EP/N029496/1,EP/N029496/2,EP/N029356/1,EP/N029577/1,and EP/N029577/2).
文摘Aircraft ground movement plays a key role in improving airport efficiency,as it acts as a link to all other ground operations.Finding novel approaches to coordinate the movements of a fleet of aircraft at an airport in order to improve system resilience to disruptions with increasing autonomy is at the center of many key studies for airport airside operations.Moreover,autonomous taxiing is envisioned as a key component in future digitalized airports.However,state-of-the-art routing and scheduling algorithms for airport ground movements do not consider high-fidelity aircraft models at both the proactive and reactive planning phases.The majority of such algorithms do not actively seek to optimize fuel efficiency and reduce harmful greenhouse gas emissions.This paper proposes a new approach for generating efficient four-dimensional trajectories(4DTs)on the basis of a high-fidelity aircraft model and gainscheduling control strategy.Working in conjunction with a routing and scheduling algorithm that determines the taxi route,waypoints,and time deadlines,the proposed approach generates fuel-efficient 4DTs in real time,while respecting operational constraints.The proposed approach can be used in two contexts:①as a reactive decision support tool to generate new trajectories that can resolve unprecedented events;and②as an autopilot system for both partial and fully autonomous taxiing.The proposed methodology is realistic and simple to implement.Moreover,simulation studies show that the proposed approach is capable of providing an up to 11%reduction in the fuel consumed during the taxiing of a large Boeing 747-100 jumbo jet.
基金Graduate Innovation and Practice Foundation of Beijing University of Aeronautics amd Astronautics
文摘The previous study on modeling of the tilt rotor aircraft used to put a premium on the complicated aerodynamic computation, and the research on the motion equations is often constrained to frequently use the oversimplified 6-degree of freedom （DOF） rigid body equations. However, the transfiguration of aircraft during transition stage, is complicated due to the aerodynamic interference and the change of center of gravity （CG）. Moreover, the gyroscopic moment caused by tilting the high-speed revolving rotors seriously interferes with the aircraft attitude. The above-cited 6-DOF single rigid body equations do not take the inertia coupling effects into account during transition. For this sake, the article, reckoning the body, the nacelles and the rotors to be independent entities, establishes a realistic model in the form of multi-body motion equations. First, by applying Newton＇s laws and angular momentum theorem to a mass of elements of the aircraft, the multi-body motion equations in inertial flame as well as in body frame are obtained by integrating over all elements. As the equations are of implicit nonlinear differential type, the consistent initial value problem should be solved. Then, a numerical simulation of the differential equations is conducted by means of the Runge-Kutta-Felhberg integral algorithm. The modeling and the simulation algorithm are verified against the data of XV-15 as an example. The model can be used in the area of flight dynamics, flight control and flight safety of tilt rotor air- craft.
文摘Aircraft are profitable to their owners as long as they are in the air transporting passengers to their destinations;therefore it is vital to minimize as much as possible their preparation time on the ground.In this paper we simulate different boarding strategies with the help of a model based on cellular automata parallel computational tool,attempting to find the most efficient way to deliver each passenger to her/his assigned seat.Two seat arrangements are used,a small one based on Airbus A320/ Boeing 737 and a larger one based on Airbus A380/ Boeing777-300.A wide variety of parameters,including time delay for luggage storing,the frequency by which the passengers enter the plane,different walking speeds of passengers depending on sex,age and height,and the possibility of walking past their seat,are simulated in order to achieve realistic results,as well as monitor their effects on boarding time.The simulation results indicate that the boarding time can be significantly reduced by the simple grouping and prioritizing of passengers.In accordance with previous papers and the examined strategies,the outside-in and reverse pyramid boarding methods outperform all the others for both the small and large airplane seat layout.In the latter,the examined strategies are introduced for first time in an analogous way to the initial small seat arrangement of Airbus A320/ Boeing737 aircraft family.Moreover,since in real world scenarios,the compliance of all the passengers to the suggested group division and boarding strategy cannot be guaranteed,further simulations were conducted.It is clear that as the number of passengers disregarding the priority of the boarding groups increases,the time needed for the boarding to complete tends towards that of the random boarding strategy,thus minimizing the possible advantages gained by the proposed boarding strategies.
文摘A general mathematical model of carrier-based aircraft ski jump take-off is derived based on tensor. The carrier, the aircraft body and the movable parts of the landing gears are treated as independent entities. These entities are assembled into a multi-rigid-body system with flexible links. Dynamical equations of each entity are derived on the basis of the Newton law and the Euler transformation. Using the invariance property of the tensor, the dynamical and kinematical equations are converted to tensor forms which are invariant under time-dependent coordinate transformations. Then the tensor-formed equations are expressed by the matrix operation. Differential equation group of the matrix form is formulated for the programming. The closure of the model is discussed, and the simulation results are given.
基金Project(2013AA063903)supported by High-tech Research and Development Program of China
文摘To improve the operational efficiency of global optimization in engineering, Kriging model was established to simplify the mathematical model for calculations. Ducted coaxial-rotors aircraft was taken as an example and Fluent software was applied to the virtual prototype simulations. Through simulation sample points, the total lift of the ducted coaxial-rotors aircraft was obtained. The Kriging model was then constructed, and the function was fitted. Improved particle swarm optimization(PSO) was also utilized for the global optimization of the Kriging model of the ducted coaxial-rotors aircraft for the determination of optimized global coordinates. Finally, the optimized results were simulated by Fluent. The results show that the Kriging model and the improved PSO algorithm significantly improve the lift performance of ducted coaxial-rotors aircraft and computer operational efficiency.
基金supported by the National Natural Science Foundation of China (No. 11572150)
文摘The existing full-span models of the tiltrotor aircraft adopted the rigid blade model without considering the coupling relationship among the elastic blade, wing and fuselage. To overcome the limitations of the existing full-span models and improve the precision of aeroelastic analysis of tiltrotor aircraft in forward flight, the aeroelastic stability analysis model of full-span tiltrotor aircraft in forward flight has been presented in this paper by considering the coupling among elastic blade, wing, fuselage and various components. The analytical model is validated by comparing with the calculation results and experimental data in the existing references. The influence of some structural parameters, such as the fuselage degrees of freedom, relative displacement between the hub center and the gravity center, and nacelle length, on the system stability is also investigated. The results show that the fuselage degrees of freedom decrease the critical stability velocity of tiltrotor aircraft, and the variation of the structural parameters has great influence on the system stability,and the instability form of system can change between the anti-symmetric and symmetric wing motions of vertical and chordwise bending.
文摘The Auto-Transformer Rectifier Unit（ATRU） is one preferred solution for high-power AC/DC power conversion in aircraft. This is mainly due to its simple structure, high reliability and reduced k VA ratings. Indeed, the ATRU has become a preferred AC/DC solution to supply power to the electric environment control system on-board future aircraft. In this paper, a general modelling method for ATRUs is introduced. The developed model is based on the fact that the DC voltage and current are strongly related to the voltage and current vectors at the AC terminals of ATRUs. In this paper, we carry on our research in modelling symmetric 18-pulse ATRUs and develop a generic modelling technique. The developed generic model can study not only symmetric but also asymmetric ATRUs. An 18-pulse asymmetric ATRU is used to demonstrate the accuracy and efficiency of the developed model by comparing with corresponding detailed switching SABER models provided by our industrial partner. The functional models also allow accelerated and accurate simulations and thus enable whole-scale more-electric aircraft electrical power system studies in the future.
基金supported by the National Natural Science Foundations of China (Nos. 60972006 and61179042)the National Science and Technology Support Program (No. 2011BAH24B10)
文摘A time-optimal aircraft-following model is introduced to address air traffic flow interference by velocity reduction. The objective function is set up as minimizing the recovery time during which the separation minima are not infringed and the separation of the air traffic flow returns to the initial separation at the terminal time. Pontryagin＇s minimum principle is used to solve the optimum aircraft-following velocity control law. An analytical minimum safe following separation is also provided under the time-optimal control law. The simulation results show that the precision first-order tracking accuracy is achieved without losing the separation.
文摘Researches have indicated that impinging droplets can be entrapped as liquid in the ice matrix and the temperature of accreting ice surface is below the freezing point. When liquid entrapment by ice matrix happens, this kind of ice is called spongy ice. A new spongy icing model for the ice accretion problem on airfoil or aircraft has been developed to account for entrapped liquid within accreted ice and to improve the determination of the surface temperature when enter- ing clouds with supercooled droplets. Different with conventional icing model, this model identifies icing conditions in four regimes： rime, spongy without water film, spongy with water film and glaze. By using the Eulerian method based on two-phase flow theory, the impinging droplet flow was investigated numerically. The accuracy of the Eulerian method for computing the water collection efficiency was assessed, and icing shapes and surface temperature distributions predicted with this spongy icing model agree with experimental results well.
文摘In the context of applying computer aided design tools to aircraft conceptualdesign, a sketch based approach is proposed to help designers turn their original concepts intocomplex numerical models that are usable for further analysis and optimization. This approachemphasizes the integration of general configuration and the layout of such components as engines,payloads, fuel tanks and landing gears, and the representation of a design scheme as uniform planesketches and three dimensional models. This paper presents the measures adopted to implement theapproach in a prototype system, including the object-oriented data structure, friendly graphicaluser interfaces and basic features of relevant modules. Several examples generated in the prototypeand applications of the results are finally outlined to illustrate the effectiveness of theapproach.
基金National Natural Science Foundation of China （50805119） Aeronautical Science Foundation in China （2010ZE53049） Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing （SAMC11 -JS-07-200）
文摘The riveting joint is one of the important joint methods to permanently fasten two thin-walled sheet-metal parts. It is most ba- sic to efficiently analyze and estimate the deformation of the riveting joint for the performance, fatigue durability and damage of the riveting structure in the aircraft. This paper researches the riveting process mathematics modeling and simulating to more accurately analyze deformation of thin-walled sheet-metal parts. First, the mathematics and mechanics models for the elastic deformation, plastic deformation and springback of the rivet are built by mechanics theory. Second, on the basis of ABAQUS system, a finite element system, an instance made up of the rivet and two thin-walled sheet-metal parts of aluminum alloy is used to analyze and simulate the stress and deformation. What＇s more, a comparison is made between the results obtained by the mathematics and mechanics models and those by finite element method （FEM）. The models are proved true by the calculating and simulation results of the instance.
文摘Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance service company are addressed. The authors developed a set of vehicle rout ings to cover each schedule flights; the objectives pursued are the maximization of vehicle and manpower utilization and minimization of operation time. To obta in the goals, an integer-programming model with genetic algorithm is formulated . It is found that the company can produce an effective and efficient schedules to deploy the manpower and equipment resources. Simulation is used to verify the method and a MATLAB program is used to code the genetic algorithm. This model i s further illustrated by a case study in Hong Kong and the benefit elaborated. F inally, a conclusion is made to summarize the experience of this project and pro vide further improvement.
基金supported by the Excellence Foundation of BUAA for Ph D.and the National Natural Science Foundation of China(No.91641123).
文摘To efficiently and fully utilize aircraft carrier resources,an optimization model is presented to deal with parameter matching between aircraft and carrier in the process of aircraft catapult launch.Based on carrier aircraft longitudinal dynamic equations and theorem of kinetic energy in catapult launch course,the work characteristics of different forces are learned and a theory model of parameter matching is deduced.In view of the uncertainty of the model parameters of the theory model and the low matching accuracy of the approximate model,an optimization model of parameter matching is introduced in line with the structure of theory model and the approximate model and is generated by the proposed immune genetic algorithm.Compared with the original genetic algorithm and immune algorithm,the proposed algorithm has better calculation accuracy and convergence.The calculation results show that the optimization model occupies certain application value of engineering estimation from the comparison with the relevant literature data and has higher precision than the approximate models.The validity of the proposed approach is verified with numerical case study on a carrier based aircraft.
文摘Excessive vibration of aircraft wings during flight is harmful and may cause propagation of existing cracks in the material, leading to catastrophic failures as a result of material fatigue. This study investigates the variations of modal characteristics of aircraft wings with respect to changes in the structural configurations. We develop parametric Computer-Aided Design (CAD) models to capture new design intend on the aircraft wing architectures. Subsequent Finite Element Analysis (FEA) based vibration analysis is performed to study the effects of architecture changes on the wing’s natural frequencies and mode shapes. It is concluded that the spar placement and the number of ribs have significant influence on the wing’s natural vibration properties. Integrating CAD modelling and FEA vibration analysis enables designers to develop alternative wing architectures to implement design requirements in the preliminary design stage.
文摘This paper presents an identification of a continuous-time linear aircraft model while considering control surface actuators using the maximal length sequence signal. In the identification with the actuator, the input for identification is given by the command to the actuator or the output from the actuator. In the numerical simulation of longitudinal aircraft model identification, the identification performance is improved when the bandwidth ratio for the short-period mode and the bandwidth ratio between the actuator and the short-period mode are increased. Furthermore, a few input noises bring about an improvement in the identification performance. This may be effective in the case that the performance of the actuator is not sufficiently good in practical system identification.
文摘This paper considers the possibility of estimating continuous-time linear aircraft models by using the subspace identification The outline of the subspace identification for estimating the continuous-time linear model is first mentioned. The identification simulation in which the subspace identification is then applied to the modeling of aircraft in the lateral motion is performed. As a result, the continuous-time linear aircraft model is appropriately estimated by the subspace identification if the amount of the measurement noise is not so much.
基金Project supported by the National Natural Science Foundation of China(Grant No.61101173)the National Basic Research Program of China(Grant No.613206)+1 种基金the National High Technology Research and Development Program of China(Grant No.2012AA01A308)the State Scholarship Fund by the China Scholarship Council(CSC),and the Oversea Academic Training Funds,and University of Electronic Science and Technology of China(UESTC)
文摘When modeling a stealth aircraft with low RCS（Radar Cross Section）, conventional parameter estimation methods may cause a deviation from the actual distribution, owing to the fact that the characteristic parameters are estimated via directly calculating the statistics of RCS. The Bayesian–Markov Chain Monte Carlo（Bayesian-MCMC） method is introduced herein to estimate the parameters so as to improve the fitting accuracies of fluctuation models. The parameter estimations of the lognormal and the Legendre polynomial models are reformulated in the Bayesian framework. The MCMC algorithm is then adopted to calculate the parameter estimates. Numerical results show that the distribution curves obtained by the proposed method exhibit improved consistence with the actual ones, compared with those fitted by the conventional method. The fitting accuracy could be improved by no less than 25% for both fluctuation models, which implies that the Bayesian-MCMC method might be a good candidate among the optimal parameter estimation methods for stealth aircraft RCS models.
文摘In the Windows XP 64 bit operating system environment, several common PC were used to build a cluster system, establishing the distributed memory parallel (DMP) computing system. A finite element model of whole aircraft with about 260 million degrees of freedom (DOF) was developed using three-node and four-node thin shell element and two-node beam element. With the large commercial finite element software MSC.MARC and employing two kinds of domain decomposition method (DDM) respectively, realized the parallel solving for the static strength analysis of the whole aircraft model, which offered a high cost-effective solution for solving large-scale and complex finite element models.
