The dominated contradiction in optimizing the performance of magnesium-air battery anode lies in the difficulty of achieving a good balance between activation and passivation during discharge process.To further reconci...The dominated contradiction in optimizing the performance of magnesium-air battery anode lies in the difficulty of achieving a good balance between activation and passivation during discharge process.To further reconcile this contradiction,two Mg-0.1Sc-0.1Y-0.1Ag anodes with different residual strain distribution through extrusion with/without annealing are fabricated.The results indicate that annealing can significantly lessen the“pseudo-anode”regions,thereby changing the dissolution mode of the matrix and achieving an effective dissolution during discharge.Additionally,p-type semiconductor characteristic of discharge productfilm could suppress the self-corrosion reaction without reducing the polarization of anode.The magnesium-air battery utilizing annealed Mg-0.1Sc-0.1Y-0.1Ag as anode achieves a synergistic improvement in specific capacity(1388.89 mA h g^(-1))and energy density(1960.42 mW h g^(-1)).This anode modification method accelerates the advancement of high efficiency and long lifespan magnesium-air batteries,offering renewable and cost-effective energy solutions for electronics and emergency equipment.展开更多
In 316L austenitic stainless steel,the presence of ferrite phase severely affects the non-magnetic properties.316L austenitic stainless steel with low-alloy type(L-316L)and high-alloy type(H-316L)has been studied.The ...In 316L austenitic stainless steel,the presence of ferrite phase severely affects the non-magnetic properties.316L austenitic stainless steel with low-alloy type(L-316L)and high-alloy type(H-316L)has been studied.The microstructure and solidification kinetics of the two as-cast grades were in situ observed by high temperature confocal laser scanning microscopy(HT-CLSM).There are significant differences in the as-cast microstructures of the two 316L stainless steel compositions.In L-316L steel,ferrite morphology appears as the short rods with a ferrite content of 6.98%,forming a dual-phase microstructure consisting of austenite and ferrite.Conversely,in H-316L steel,the ferrite appears as discontinuous network structures with a content of 4.41%,forming a microstructure composed of austenite and sigma(σ)phase.The alloying elements in H-316L steel exhibit a complex distribution,with Ni and Mo enriching at the austenite grain boundaries.HT-CLSM experiments provide the real-time observation of the solidification processes of both 316L specimens and reveal distinct solidification modes:L-316L steel solidifies in an FA mode,whereas H-316L steel solidifies in an AF mode.These differences result in ferrite and austenite predominantly serving as the nucleation and growth phases,respectively.The solidification mode observed by experiments is similar to the thermodynamic calculation results.The L-316L steel solidified in the FA mode and showed minimal element segregation,which lead to a direct transformation of ferrite to austenite phase(δ→γ)during phase transformation after solidification.Besides,the H-316L steel solidified in the AF mode and showed severe element segregation,which lead to Mo enrichment at grain boundaries and transformation of ferrite into sigma and austenite phases through the eutectoid reaction(δ→σ+γ).展开更多
This paper presents the design of an asymmetrically variable wingtip anhedral angles morphing aircraft,inspired by biomimetic mechanisms,to enhance lateral maneuver capability.Firstly,we establish a lateral dynamic mo...This paper presents the design of an asymmetrically variable wingtip anhedral angles morphing aircraft,inspired by biomimetic mechanisms,to enhance lateral maneuver capability.Firstly,we establish a lateral dynamic model considering additional forces and moments resulting during the morphing process,and convert it into a Multiple Input Multiple Output(MIMO)virtual control system by importing virtual inputs.Secondly,a classical dynamics inversion controller is designed for the outer-loop system.A new Global Fast Terminal Incremental Sliding Mode Controller(NDO-GFTISMC)is proposed for the inner-loop system,in which an adaptive law is implemented to weaken control surface chattering,and a Nonlinear Disturbance Observer(NDO)is integrated to compensate for unknown disturbances.The whole control system is proven semiglobally uniformly ultimately bounded based on the multi-Lyapunov function method.Furthermore,we consider tracking errors and self-characteristics of actuators,a quadratic programmingbased dynamic control allocation law is designed,which allocates virtual control inputs to the asymmetrically deformed wingtip and rudder.Actuator dynamic models are incorporated to ensure physical realizability of designed allocation law.Finally,comparative experimental results validate the effectiveness of the designed control system and control allocation law.The NDO-GFTISMC features faster convergence,stronger robustness,and 81.25%and 75.0%reduction in maximum state tracking error under uncertainty compared to the Incremental Nonlinear Dynamic Inversion Controller based on NDO(NDO-INDI)and Incremental Sliding Mode Controller based on NDO(NDO-ISMC),respectively.The design of the morphing aircraft significantly enhances lateral maneuver capability,maintaining a substantial control margin during lateral maneuvering,reducing the burden of the rudder surface,and effectively solving the actuator saturation problem of traditional aircraft during lateral maneuvering.展开更多
Due to scale effects,micromechanical resonators offer an excellent platform for investigating the intrinsic mechanisms of nonlinear dynamical phenomena and their potential applications.This review focuses on mode-coup...Due to scale effects,micromechanical resonators offer an excellent platform for investigating the intrinsic mechanisms of nonlinear dynamical phenomena and their potential applications.This review focuses on mode-coupled micromechanical resonators,highlighting the latest advancements in four key areas:internal resonance,synchronization,frequency combs,and mode localization.The origin,development,and potential applications of each of these dynamic phenomena within mode-coupled micromechanical systems are investigated,with the goal of inspiring new ideas and directions for researchers in this field.展开更多
In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not ...In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not only stable single-pulse state, but also special mode-locked pulses with the characteristics of high energy and noisy behaviors at proper pump power and cavity polarization state. In addition, we have deeply investigated the real-time spectral evolutions of the mode-locked pulses through the dispersive Fourier transformation(DFT) technique. It can be found that the pulse regime can actually consist of a lot of small noise pulses with randomly varying intensities. We believe that these results will further enrich the nonlinear dynamical processes in the ultrafast lasers.展开更多
During the boreal summer,intraseasonal oscillations exhibit significant interannual variations in intensity over two key regions:the central-western equatorial Pacific(5°S-5°N,150°E-150°W)and the s...During the boreal summer,intraseasonal oscillations exhibit significant interannual variations in intensity over two key regions:the central-western equatorial Pacific(5°S-5°N,150°E-150°W)and the subtropical Northwestern Pacific(10°-20°N,130°E-175°W).The former is well-documented and considered to be influenced by the ENSO,while the latter has received comparatively less attention and is likely influenced by the Pacific Meridional Mode(PMM),as suggested by partial correlation analysis results.To elucidate the physical processes responsible for the enhanced(weakened)intraseasonal convection over the subtropical northwestern Pacific during warm(cold)PMM years,the authors employed a moisture budget analysis.The findings reveal that during warm PMM years,there is an increase in summer-mean moisture over the subtropical northwestern Pacific.This increase interacts with intensified vertical motion perturbations in the region,leading to greater vertical moisture advection in the lower troposphere and consequently resulting in convective instability.Such a process is pivotal in amplifying intraseasonal convection anomalies.The observational findings were further verified by model experiments forced by PMM-like sea surface temperature patterns.展开更多
Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical e...Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical experimental measurement and numerical simulation pose research challenges.This study focuses on the ice load of a cylinder structure breaking upward through the ice sheet form underneath in the Small Ice Model Basin of China Ship Scientific Research Center(CSSRC SIMB).A high-speed camera system was employed to observe the ice sheet failure during the tests,in which,with the loading position as center,local radial cracks and circumferential cracks were generated.A load sensor was used to measure the overall ice load during this process.Meanwhile,a numerical model was developed using LS-DYNA for validation and comparison.With this model,numerical simulation was conducted under various ice thicknesses and upgoing speeds to analyze the instantaneous curves of ice load.The calculation results were statistically analyzed under different working conditions to determine the influence of the factors on the ice load of the cylinder.The study explores the measurement method about ice load of objects vertically breaking through model ice sheet and is expected to provide some fundamental insights into the safety design of underwater structures operating in ice waters.展开更多
A novel near-infrared all-fiber mode monitor based on a mini-two-path Mach-Zehnder interferometer(MTP-MZI)is proposed.The MTP-MZI mode monitor is created by fusing a section of(no-core fiber,NCF)and a(single-mode fibe...A novel near-infrared all-fiber mode monitor based on a mini-two-path Mach-Zehnder interferometer(MTP-MZI)is proposed.The MTP-MZI mode monitor is created by fusing a section of(no-core fiber,NCF)and a(single-mode fiber,SMF)together with an optical fiber fusion splicer,establishing two distinct centimeter-level optical transmission paths.Since the high-order modes in NCF transmit near-infrared light more sensitively to curvature-induced energy leakage than the fundamental mode in SMF,the near-infrared high-order mode light leaks out of NCF when the curvature changes,causing the MTP-MZI transmission spectrum to change.By ana⁃lyzing the relationship between the curvature,transmission spectrum,and spatial frequency spectrum,the modes involved in the interference can be studied,thereby revealing the mode transmission characteristics of near-infra⁃red light in optical fibers.In the verification experiments,higher-order modes were excited by inserting a novel hollow-core fiber(HCF)into the MTP-MZI.When the curvature of the MTP-MZI changes,the near-infrared light high-order mode introduced into the device leaks out,causing the transmission spectrum to return to its origi⁃nal state before bending and before the HCF was spliced.The experimental results demonstrate that the MTP-MZI mode monitor can monitor the fiber modes introduced from the external environment,providing both theoretical and experimental foundations for near-infrared all-fiber mode monitoring in optical information systems.展开更多
The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of th...The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of the diesel engine air path system,assuming that the system may simultaneously be affected by actuator faults and external random disturbances,a disturbance observer-based sliding mode controller is designed.Through the linear matrix inequality technique for solving observer and controller gains,optimal gain matrices can be obtained,eliminating the manual adjustment process of controller parameters and reducing the chattering phenomenon of the sliding mode surface.Finally,the effectiveness of the proposed method is verified through simulation analysis.展开更多
In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis...In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.展开更多
Diaphragmatic function is central to respiration,and its evaluation is critical in intensive care unit(ICU)settings.Ultrasonography is a reliable bedside tool to assess diaphragmatic excursion(DE).[1,2]The conventiona...Diaphragmatic function is central to respiration,and its evaluation is critical in intensive care unit(ICU)settings.Ultrasonography is a reliable bedside tool to assess diaphragmatic excursion(DE).[1,2]The conventional M-mode(MM)offers high-resolution imaging but requires precise alignment,which can be diffi cult in ICU patients.[3-5]Anatomical M-mode(AMM)allows flexible line adjustment,enabling accurate DE measurements despite poor acoustic windows.[6]However,comparative data between MM and AMM are limited.This retrospective study evaluated the concordance between MM and AMM for assessing right DE.展开更多
Objective: To develop a best-evidence-based optimal nutrition management plan for patients with chronic heart failure, apply it in clinical practice, and evaluate its effectiveness. Methods: Use the KTA knowledge tran...Objective: To develop a best-evidence-based optimal nutrition management plan for patients with chronic heart failure, apply it in clinical practice, and evaluate its effectiveness. Methods: Use the KTA knowledge translation model to guide evidence-based practice in nutrition management, and compare the nutritional status, cardiac function status, quality of life, and quality review indicators of chronic heart failure patients before and after the application of evidence. Results: After the application of evidence, the nutritional status indicators (MNA-SF score, albumin, hemoglobin) of two groups of heart failure patients significantly increased compared to before the application of evidence, with statistically significant differences (p Conclusion: The KTA knowledge translation model provides methodological guidance for the implementation of evidence-based practice for heart failure patients. This evidence-based practice project is beneficial for improving the outcomes of malnutrition in chronic heart failure patients and is conducive to standardizing nursing pathways, thereby promoting the improvement of nursing quality.展开更多
To enhance energy interaction among low-voltage stations(LVSs)and reduce the line loss of the distribution network,a novel operation mode of the micro-pumped storage system(mPSS)has been proposed based on the common r...To enhance energy interaction among low-voltage stations(LVSs)and reduce the line loss of the distribution network,a novel operation mode of the micro-pumped storage system(mPSS)has been proposed based on the common reservoir.First,some operation modes of mPSS are analyzed,which include the separated reservoir mode(SRM)and common reservoir mode(CRM).Then,based on the SRM,and CRM,an energy mutual assistance control model between LVSs has been built to optimize energy loss.Finally,in the simulation,compared to the model without pumped storage in the LVS,the SRMand CLRMcan decrease the total energy loss by 294.377 and 432.578 kWh,respectively.The configuration of mPSS can improve the utilization rate of the new energy source generation system,and relieve the pressure of transformer capacity in the LVS.Compared with the SRM,the proposed CRM has reduced the total energy loss by 138.201 kWh,increased the new energy consumption by 161.642 kWh,and decreased the line loss by 7.271 kWh.With the efficiency of the mPSS improving,the total energy loss reduction of CRM will be 3.5 times that of SRM.Further,the CRMcan significantly reduce the reservoir capacity construction of mPSS and ismore suitable for scenarios where the capacity configuration of mPSS is limited.展开更多
Ba-constructions carry high level of transitivity,but a deviation towards low transitivity happens.It is found that mode provides axis of this transitivity deviation,especially in spoken dialogue.Under the influence o...Ba-constructions carry high level of transitivity,but a deviation towards low transitivity happens.It is found that mode provides axis of this transitivity deviation,especially in spoken dialogue.Under the influence of irrealis mode,parameters such as aspects,affectedness of O,individuation of O,and affirmation exhibit different degrees of transitivity deviation.Speech acts,which is closely related to mode,are the driving force in discourse of this phenomenon.The composition rules of speech acts of directive,declarative,commitment,and emotive,which account for the majority of speech acts in spoken dialogue,determine that they are all irrealis.Therefore,under the axis of irrealis mode,several transitivity parameters of ba-constructions in oral dialogue deviates towards low transitivity.The phenomenon of deviation of transitivity in ba-constructions verifies transitivity hypothesis.展开更多
To broaden the frequency regulation range of piezoelectric motors,this paper proposes a piezoelectric vibrator that operates in multiple in-plane vibration modes with distinct resonance frequencies.The piezoelectric v...To broaden the frequency regulation range of piezoelectric motors,this paper proposes a piezoelectric vibrator that operates in multiple in-plane vibration modes with distinct resonance frequencies.The piezoelectric vibrator was constructed by reasonably arranging multiple groups of piezoelectric ceramic(PZT)sheets based on the most typical rectangular plate piezoelectric motors.Suitable working modes were selected,and the excitation method of these operating modes was also analyzed.Besides,interactions between selected operating modes were also investigated.The finite element software,ANSYS,was adopted to optimize the structural parameters of the vibrator through modal analysis to match the resonance frequencies of specific modes.After that,whether the selected operating modes can be successfully motivated was verified by harmonic response analysis.Finally,the vibration characteristics of piezoelectric vibrators under conventional vibration modes and multiple modes were acquired by transient analysis,respectively.Simulation results reveal that under dual-frequency excitation scheme 1,response displacements of the driving point are relatively larger.This strategy not only facilitates the excitation of B4 mode but also enables control over the ratio of horizontal to vertical displacements of the driving point.Additionally,incorporating B4 mode expands the frequency adjustment range of piezoelectric vibrators.展开更多
The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields.In this study,the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression a...The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields.In this study,the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression asymmetry was examined using optical microscope(OM),x-ray diffraction(XRD),viscoplastic self-consistent(VPSC)modeling,and electron backscatter diffraction(EBSD).The VPSC hardening parameters were significantly adjusted based on the Schmid factor of deformation modes in rare earth magnesium(Mg-RE)alloy,which came from the EBSD data.Excellent agreement was found between the modified VPSC model's calculation results,especially the stress-strain curves and pole figures.The alloy exhibited good strength with a negligible tension-compression asymmetry and an impressive 0.98 ratio of compressive yield strength to tensile yield strength(CYS/TYS).The main cause could be attributed to the unusual texture of(11-20)<0001>in alloy,which eliminated the imbalance in tension and compression deformation by having a negative effect on the activation of{10-12}twinning in tensile and a positive effect in compressive deformation.The activation level of{10-12}twinning was 0.37 and 0.40calculated by VPSC model,in the plastic deformation of tension and compression,respectively;in the tensile and compression samples,the EBSD data indicated that approximately 31.9%and 31.1%(area proportion)of the grains were deformed with twins,respectively.Both tension and compression deformation showed the{10-12}twinning in the early stage of deformation,which transformed to{11-22}twinning in the later stage.The considerable activation of pyramidal during the later stages of deformation endowed the alloy with good ductility.展开更多
Artificial intelligence(AI)technology,with its powerful capabilities in data analysis,intelligent interaction,and personalized learning support,is creating new opportunities for the reform of education and teaching.Th...Artificial intelligence(AI)technology,with its powerful capabilities in data analysis,intelligent interaction,and personalized learning support,is creating new opportunities for the reform of education and teaching.Through the integration of online and offline blended teaching methods,this study utilizes a learning platform to analyze multi-source student learning data,assess knowledge mastery,and dynamically generate personalized learning paths.Abstract concepts are visualized via 3D modeling and dynamic simulation to enhance students'comprehension of microbiological knowledge.Knowledge mapping is employed to systematically organize course concepts and establish dynamic connections,aiding students in navigating complex and abstract knowledge structures.By leveraging an interactive learning platform,a multi-evaluation system incorporating dynamic assessment,teacher feedback,and student self-evaluation is established.This system evaluates learning outcomes through automated grading and intelligent analysis,while also delivering adaptive teaching resources tailored to individual student differences,so as to meet personalized learning need and stimulate students'interest and motivation.This study offers innovative insights for the curriculum reform of Environmental Engineering Microbiology in the context of emerging engineering education.展开更多
基金the National Natural Science:Foundation of China(52375370)the Open Project of Salt Lake Chemical Engineering Research Complex,Qinghai University(2023-DXSSKF-Z02)+2 种基金the Nat-ural Science Foundation of Shanxi(202103021224049)GDAS Projects of International cooperation platform of Sci-ence and Technology(2022GDASZH-2022010203-003)Guangdong province Science and Technology Plan Projects(2023B1212060045).
文摘The dominated contradiction in optimizing the performance of magnesium-air battery anode lies in the difficulty of achieving a good balance between activation and passivation during discharge process.To further reconcile this contradiction,two Mg-0.1Sc-0.1Y-0.1Ag anodes with different residual strain distribution through extrusion with/without annealing are fabricated.The results indicate that annealing can significantly lessen the“pseudo-anode”regions,thereby changing the dissolution mode of the matrix and achieving an effective dissolution during discharge.Additionally,p-type semiconductor characteristic of discharge productfilm could suppress the self-corrosion reaction without reducing the polarization of anode.The magnesium-air battery utilizing annealed Mg-0.1Sc-0.1Y-0.1Ag as anode achieves a synergistic improvement in specific capacity(1388.89 mA h g^(-1))and energy density(1960.42 mW h g^(-1)).This anode modification method accelerates the advancement of high efficiency and long lifespan magnesium-air batteries,offering renewable and cost-effective energy solutions for electronics and emergency equipment.
基金support of the Research Project Supported by Shanxi Scholarship Council of China(2022-040)"Chunhui Plan"Collaborative Research Project by the Ministry of Education of China(HZKY20220507)+2 种基金National Natural Science Foundation of China(52104338)Applied Fundamental Research Programs of Shanxi Province(202303021221036)Shandong Postdoctoral Science Foundation(SDCX-ZG-202303027,SDBX2023054).
文摘In 316L austenitic stainless steel,the presence of ferrite phase severely affects the non-magnetic properties.316L austenitic stainless steel with low-alloy type(L-316L)and high-alloy type(H-316L)has been studied.The microstructure and solidification kinetics of the two as-cast grades were in situ observed by high temperature confocal laser scanning microscopy(HT-CLSM).There are significant differences in the as-cast microstructures of the two 316L stainless steel compositions.In L-316L steel,ferrite morphology appears as the short rods with a ferrite content of 6.98%,forming a dual-phase microstructure consisting of austenite and ferrite.Conversely,in H-316L steel,the ferrite appears as discontinuous network structures with a content of 4.41%,forming a microstructure composed of austenite and sigma(σ)phase.The alloying elements in H-316L steel exhibit a complex distribution,with Ni and Mo enriching at the austenite grain boundaries.HT-CLSM experiments provide the real-time observation of the solidification processes of both 316L specimens and reveal distinct solidification modes:L-316L steel solidifies in an FA mode,whereas H-316L steel solidifies in an AF mode.These differences result in ferrite and austenite predominantly serving as the nucleation and growth phases,respectively.The solidification mode observed by experiments is similar to the thermodynamic calculation results.The L-316L steel solidified in the FA mode and showed minimal element segregation,which lead to a direct transformation of ferrite to austenite phase(δ→γ)during phase transformation after solidification.Besides,the H-316L steel solidified in the AF mode and showed severe element segregation,which lead to Mo enrichment at grain boundaries and transformation of ferrite into sigma and austenite phases through the eutectoid reaction(δ→σ+γ).
基金supported by the National Natural Science Foundation of China(Nos.62103052 and No.52175214)。
文摘This paper presents the design of an asymmetrically variable wingtip anhedral angles morphing aircraft,inspired by biomimetic mechanisms,to enhance lateral maneuver capability.Firstly,we establish a lateral dynamic model considering additional forces and moments resulting during the morphing process,and convert it into a Multiple Input Multiple Output(MIMO)virtual control system by importing virtual inputs.Secondly,a classical dynamics inversion controller is designed for the outer-loop system.A new Global Fast Terminal Incremental Sliding Mode Controller(NDO-GFTISMC)is proposed for the inner-loop system,in which an adaptive law is implemented to weaken control surface chattering,and a Nonlinear Disturbance Observer(NDO)is integrated to compensate for unknown disturbances.The whole control system is proven semiglobally uniformly ultimately bounded based on the multi-Lyapunov function method.Furthermore,we consider tracking errors and self-characteristics of actuators,a quadratic programmingbased dynamic control allocation law is designed,which allocates virtual control inputs to the asymmetrically deformed wingtip and rudder.Actuator dynamic models are incorporated to ensure physical realizability of designed allocation law.Finally,comparative experimental results validate the effectiveness of the designed control system and control allocation law.The NDO-GFTISMC features faster convergence,stronger robustness,and 81.25%and 75.0%reduction in maximum state tracking error under uncertainty compared to the Incremental Nonlinear Dynamic Inversion Controller based on NDO(NDO-INDI)and Incremental Sliding Mode Controller based on NDO(NDO-ISMC),respectively.The design of the morphing aircraft significantly enhances lateral maneuver capability,maintaining a substantial control margin during lateral maneuvering,reducing the burden of the rudder surface,and effectively solving the actuator saturation problem of traditional aircraft during lateral maneuvering.
基金supported by the National Key Research and Development Program of China(No.2022YFB3203600)the National Natural Science Foundation of China(Nos.12202355,12132013,and 12172323)the Zhejiang Provincial Natural Science Foundation of China(No.LZ22A020003)。
文摘Due to scale effects,micromechanical resonators offer an excellent platform for investigating the intrinsic mechanisms of nonlinear dynamical phenomena and their potential applications.This review focuses on mode-coupled micromechanical resonators,highlighting the latest advancements in four key areas:internal resonance,synchronization,frequency combs,and mode localization.The origin,development,and potential applications of each of these dynamic phenomena within mode-coupled micromechanical systems are investigated,with the goal of inspiring new ideas and directions for researchers in this field.
基金supported by the Guangdong Basic and Applied Basic Research Foundation (No.2023A1515010093)the Shenzhen Fundamental Research Program (Stable Support Plan Program)(Nos.JCYJ20220809170611004, 20231121110828001 and 20231121113641002)the National Taipei University of Technology-Shenzhen University Joint Research Program (No.2024001)。
文摘In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not only stable single-pulse state, but also special mode-locked pulses with the characteristics of high energy and noisy behaviors at proper pump power and cavity polarization state. In addition, we have deeply investigated the real-time spectral evolutions of the mode-locked pulses through the dispersive Fourier transformation(DFT) technique. It can be found that the pulse regime can actually consist of a lot of small noise pulses with randomly varying intensities. We believe that these results will further enrich the nonlinear dynamical processes in the ultrafast lasers.
基金supported by the National Natural Science Foundation of China [grant number 42088101]。
文摘During the boreal summer,intraseasonal oscillations exhibit significant interannual variations in intensity over two key regions:the central-western equatorial Pacific(5°S-5°N,150°E-150°W)and the subtropical Northwestern Pacific(10°-20°N,130°E-175°W).The former is well-documented and considered to be influenced by the ENSO,while the latter has received comparatively less attention and is likely influenced by the Pacific Meridional Mode(PMM),as suggested by partial correlation analysis results.To elucidate the physical processes responsible for the enhanced(weakened)intraseasonal convection over the subtropical northwestern Pacific during warm(cold)PMM years,the authors employed a moisture budget analysis.The findings reveal that during warm PMM years,there is an increase in summer-mean moisture over the subtropical northwestern Pacific.This increase interacts with intensified vertical motion perturbations in the region,leading to greater vertical moisture advection in the lower troposphere and consequently resulting in convective instability.Such a process is pivotal in amplifying intraseasonal convection anomalies.The observational findings were further verified by model experiments forced by PMM-like sea surface temperature patterns.
文摘Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical experimental measurement and numerical simulation pose research challenges.This study focuses on the ice load of a cylinder structure breaking upward through the ice sheet form underneath in the Small Ice Model Basin of China Ship Scientific Research Center(CSSRC SIMB).A high-speed camera system was employed to observe the ice sheet failure during the tests,in which,with the loading position as center,local radial cracks and circumferential cracks were generated.A load sensor was used to measure the overall ice load during this process.Meanwhile,a numerical model was developed using LS-DYNA for validation and comparison.With this model,numerical simulation was conducted under various ice thicknesses and upgoing speeds to analyze the instantaneous curves of ice load.The calculation results were statistically analyzed under different working conditions to determine the influence of the factors on the ice load of the cylinder.The study explores the measurement method about ice load of objects vertically breaking through model ice sheet and is expected to provide some fundamental insights into the safety design of underwater structures operating in ice waters.
基金Supported by the Central Government Guidance on Local Science and Technology Development Funds(2023ZY1023)the Six Talent Peaks Project in Jiangsu Province(KTHY-052).
文摘A novel near-infrared all-fiber mode monitor based on a mini-two-path Mach-Zehnder interferometer(MTP-MZI)is proposed.The MTP-MZI mode monitor is created by fusing a section of(no-core fiber,NCF)and a(single-mode fiber,SMF)together with an optical fiber fusion splicer,establishing two distinct centimeter-level optical transmission paths.Since the high-order modes in NCF transmit near-infrared light more sensitively to curvature-induced energy leakage than the fundamental mode in SMF,the near-infrared high-order mode light leaks out of NCF when the curvature changes,causing the MTP-MZI transmission spectrum to change.By ana⁃lyzing the relationship between the curvature,transmission spectrum,and spatial frequency spectrum,the modes involved in the interference can be studied,thereby revealing the mode transmission characteristics of near-infra⁃red light in optical fibers.In the verification experiments,higher-order modes were excited by inserting a novel hollow-core fiber(HCF)into the MTP-MZI.When the curvature of the MTP-MZI changes,the near-infrared light high-order mode introduced into the device leaks out,causing the transmission spectrum to return to its origi⁃nal state before bending and before the HCF was spliced.The experimental results demonstrate that the MTP-MZI mode monitor can monitor the fiber modes introduced from the external environment,providing both theoretical and experimental foundations for near-infrared all-fiber mode monitoring in optical information systems.
基金Supported by the National Key R&D Program of China(2021YFB2011300)the National Natural Science Foundation of China(52275044,52205299)+1 种基金the Zhejiang Provincial Natural Science Foundation of China(Z23E050032)the China Postdoctoral Science Foundation(2022M710304).
文摘The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of the diesel engine air path system,assuming that the system may simultaneously be affected by actuator faults and external random disturbances,a disturbance observer-based sliding mode controller is designed.Through the linear matrix inequality technique for solving observer and controller gains,optimal gain matrices can be obtained,eliminating the manual adjustment process of controller parameters and reducing the chattering phenomenon of the sliding mode surface.Finally,the effectiveness of the proposed method is verified through simulation analysis.
文摘In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.
文摘Diaphragmatic function is central to respiration,and its evaluation is critical in intensive care unit(ICU)settings.Ultrasonography is a reliable bedside tool to assess diaphragmatic excursion(DE).[1,2]The conventional M-mode(MM)offers high-resolution imaging but requires precise alignment,which can be diffi cult in ICU patients.[3-5]Anatomical M-mode(AMM)allows flexible line adjustment,enabling accurate DE measurements despite poor acoustic windows.[6]However,comparative data between MM and AMM are limited.This retrospective study evaluated the concordance between MM and AMM for assessing right DE.
文摘Objective: To develop a best-evidence-based optimal nutrition management plan for patients with chronic heart failure, apply it in clinical practice, and evaluate its effectiveness. Methods: Use the KTA knowledge translation model to guide evidence-based practice in nutrition management, and compare the nutritional status, cardiac function status, quality of life, and quality review indicators of chronic heart failure patients before and after the application of evidence. Results: After the application of evidence, the nutritional status indicators (MNA-SF score, albumin, hemoglobin) of two groups of heart failure patients significantly increased compared to before the application of evidence, with statistically significant differences (p Conclusion: The KTA knowledge translation model provides methodological guidance for the implementation of evidence-based practice for heart failure patients. This evidence-based practice project is beneficial for improving the outcomes of malnutrition in chronic heart failure patients and is conducive to standardizing nursing pathways, thereby promoting the improvement of nursing quality.
基金sponsored by the State Grid Corporation of China Technology Project(Research on Key Technologies and Equipment Development of Micro Pumped Storage for Distributed New Energy Consumption in Distribution Networks,5400-202324196A-1-1-ZN).
文摘To enhance energy interaction among low-voltage stations(LVSs)and reduce the line loss of the distribution network,a novel operation mode of the micro-pumped storage system(mPSS)has been proposed based on the common reservoir.First,some operation modes of mPSS are analyzed,which include the separated reservoir mode(SRM)and common reservoir mode(CRM).Then,based on the SRM,and CRM,an energy mutual assistance control model between LVSs has been built to optimize energy loss.Finally,in the simulation,compared to the model without pumped storage in the LVS,the SRMand CLRMcan decrease the total energy loss by 294.377 and 432.578 kWh,respectively.The configuration of mPSS can improve the utilization rate of the new energy source generation system,and relieve the pressure of transformer capacity in the LVS.Compared with the SRM,the proposed CRM has reduced the total energy loss by 138.201 kWh,increased the new energy consumption by 161.642 kWh,and decreased the line loss by 7.271 kWh.With the efficiency of the mPSS improving,the total energy loss reduction of CRM will be 3.5 times that of SRM.Further,the CRMcan significantly reduce the reservoir capacity construction of mPSS and ismore suitable for scenarios where the capacity configuration of mPSS is limited.
文摘Ba-constructions carry high level of transitivity,but a deviation towards low transitivity happens.It is found that mode provides axis of this transitivity deviation,especially in spoken dialogue.Under the influence of irrealis mode,parameters such as aspects,affectedness of O,individuation of O,and affirmation exhibit different degrees of transitivity deviation.Speech acts,which is closely related to mode,are the driving force in discourse of this phenomenon.The composition rules of speech acts of directive,declarative,commitment,and emotive,which account for the majority of speech acts in spoken dialogue,determine that they are all irrealis.Therefore,under the axis of irrealis mode,several transitivity parameters of ba-constructions in oral dialogue deviates towards low transitivity.The phenomenon of deviation of transitivity in ba-constructions verifies transitivity hypothesis.
基金funded by National Natural Science Foundation of China,grant number 52205292.
文摘To broaden the frequency regulation range of piezoelectric motors,this paper proposes a piezoelectric vibrator that operates in multiple in-plane vibration modes with distinct resonance frequencies.The piezoelectric vibrator was constructed by reasonably arranging multiple groups of piezoelectric ceramic(PZT)sheets based on the most typical rectangular plate piezoelectric motors.Suitable working modes were selected,and the excitation method of these operating modes was also analyzed.Besides,interactions between selected operating modes were also investigated.The finite element software,ANSYS,was adopted to optimize the structural parameters of the vibrator through modal analysis to match the resonance frequencies of specific modes.After that,whether the selected operating modes can be successfully motivated was verified by harmonic response analysis.Finally,the vibration characteristics of piezoelectric vibrators under conventional vibration modes and multiple modes were acquired by transient analysis,respectively.Simulation results reveal that under dual-frequency excitation scheme 1,response displacements of the driving point are relatively larger.This strategy not only facilitates the excitation of B4 mode but also enables control over the ratio of horizontal to vertical displacements of the driving point.Additionally,incorporating B4 mode expands the frequency adjustment range of piezoelectric vibrators.
基金financial support provided by Key Research and Development Program of Heilongjiang(Grant No.2022ZX01A01)Natural Science Found of Heilongjiang Province(LH2022E080)。
文摘The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields.In this study,the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression asymmetry was examined using optical microscope(OM),x-ray diffraction(XRD),viscoplastic self-consistent(VPSC)modeling,and electron backscatter diffraction(EBSD).The VPSC hardening parameters were significantly adjusted based on the Schmid factor of deformation modes in rare earth magnesium(Mg-RE)alloy,which came from the EBSD data.Excellent agreement was found between the modified VPSC model's calculation results,especially the stress-strain curves and pole figures.The alloy exhibited good strength with a negligible tension-compression asymmetry and an impressive 0.98 ratio of compressive yield strength to tensile yield strength(CYS/TYS).The main cause could be attributed to the unusual texture of(11-20)<0001>in alloy,which eliminated the imbalance in tension and compression deformation by having a negative effect on the activation of{10-12}twinning in tensile and a positive effect in compressive deformation.The activation level of{10-12}twinning was 0.37 and 0.40calculated by VPSC model,in the plastic deformation of tension and compression,respectively;in the tensile and compression samples,the EBSD data indicated that approximately 31.9%and 31.1%(area proportion)of the grains were deformed with twins,respectively.Both tension and compression deformation showed the{10-12}twinning in the early stage of deformation,which transformed to{11-22}twinning in the later stage.The considerable activation of pyramidal during the later stages of deformation endowed the alloy with good ductility.
基金Supported by Higher Education Teaching Reform Project of Zhaoqing University(zlgc2024058).
文摘Artificial intelligence(AI)technology,with its powerful capabilities in data analysis,intelligent interaction,and personalized learning support,is creating new opportunities for the reform of education and teaching.Through the integration of online and offline blended teaching methods,this study utilizes a learning platform to analyze multi-source student learning data,assess knowledge mastery,and dynamically generate personalized learning paths.Abstract concepts are visualized via 3D modeling and dynamic simulation to enhance students'comprehension of microbiological knowledge.Knowledge mapping is employed to systematically organize course concepts and establish dynamic connections,aiding students in navigating complex and abstract knowledge structures.By leveraging an interactive learning platform,a multi-evaluation system incorporating dynamic assessment,teacher feedback,and student self-evaluation is established.This system evaluates learning outcomes through automated grading and intelligent analysis,while also delivering adaptive teaching resources tailored to individual student differences,so as to meet personalized learning need and stimulate students'interest and motivation.This study offers innovative insights for the curriculum reform of Environmental Engineering Microbiology in the context of emerging engineering education.
