The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is...The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is conducted in this paper. The principal THM characteristics of the bentonite are presented at first. A THM model is then presented to tackle the complex coupling behavior of the bentonite. The model of Alonso-Gens is incorporated to reproduce the mechanical behavior of the bentonite under unsaturated conditions. With the proposed model, numerical simulations of the China-mock-up test are carried out by using the code of LAGAMINE. The time variations associated with the temperature, degree of saturation, suction and swelling pressure of the compacted bentonite are studied. The results suggest that the proposed model is able to reproduce the mechanical behavior of the bentonite, and to predict moisture motion under coupled THM conditions.展开更多
According to the preliminary concept of the high-level radioactive waste （HLW） repository in China, a large-scale mock-up facility, named China-Mock-Up was constructed in the laboratory of Beijing Research Institute...According to the preliminary concept of the high-level radioactive waste （HLW） repository in China, a large-scale mock-up facility, named China-Mock-Up was constructed in the laboratory of Beijing Research Institute of Uranium Geology （BRIUG）. A heater, which simulates a container of radioactive waste, is placed inside the compacted Gaomiaozi （GMZ）-Na-bentonite blocks and pellets. Water inflow through the barrier from its outer surface is used to simulate the intake of groundwater. The numbers of water injection pipes, injection pressure and the insulation layer were determined based on the nu- merical modeling simulations. The current experimental data of the facility are herein analyzed. The experiment is intended to evaluate the thermo-hydro-mechano-chemical （THMC） processes occurring in the compacted bentonite-buffer during the early stage of HLW disposal and to provide a reliable database for numerical modeling and further investigation of engineered barrier system （EBS）, and the design of HLW repository.展开更多
In a fusion reactor,due to high heat flux（HHF） loads,the plasma facing components（PFCs） will suffer severe thermal shock.In this paper,the temperature distribution and thermal-stress field of tungsten armor under ...In a fusion reactor,due to high heat flux（HHF） loads,the plasma facing components（PFCs） will suffer severe thermal shock.In this paper,the temperature distribution and thermal-stress field of tungsten armor under HHF loads were investigated by the method of finite element modeling and simulating.The orthogonal experiment and range analysis were employed to compare the influence degree of four representative factors：steady-state heat flux;thickness of tungsten armor;inner diameter of cooling tube and the coefficient of convection heat transfer（CCHF） of cooling water,on thermal shock behavior tungsten mock-ups,and then get an optimization model to conduct the transient heat flux experiment.The final simulation results indicated that the steady-state heat flux and the thickness of W armor are the main influential factors for the maximum temperature of mock-ups.Furthermore,the influence of transient thermal shock all mainly concentrates on the shallow surface layer of tungsten（about 500 μm） under different transient heat flux（duration 0.5 ms）.The results are useful for the structural design and the optimization of tungsten based plasma facing materials for the demonstration reactor（DEMO） or other future reactors.展开更多
After introducing the present status of digital mock-up (DMU) technology in product development and research,the modeling and its key technologies in product design are described. The architecture of digital design pl...After introducing the present status of digital mock-up (DMU) technology in product development and research,the modeling and its key technologies in product design are described. The architecture of digital design platform system for main DMU model is developed. Based on the architecture,a method of skeleton design has been applied to the development of digital design system.展开更多
Tungsten is a promising candidate for plasma-facing materials to cover the surface of the divertor plate in the design of an international thermonuclear experimental reactor （ITER）. Copper as a heat sink material se...Tungsten is a promising candidate for plasma-facing materials to cover the surface of the divertor plate in the design of an international thermonuclear experimental reactor （ITER）. Copper as a heat sink material serves to transfer heat excellently. Divertor mock-ups with W/Cu graded interlayers were designed to reduce thermal stresses. Thermally induced stresses and temperature in a W/Cu divertor mock-up were analyzed using the finite element method. The graded structures with different exponents p and thick- nesses were designed and discussed. The conclusions drawn from these analyses are that thermal stresses reach the minimum and the temperature is suitable when exponent p is 1.5 and the thickness of five graded interlayers is 5 mm.展开更多
China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is ...China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is the key engineering technology of ITER construction and might be one of the crucial issues of the future reactor too. Since 2004, an associated research team including Southwestern Institute of Physics （ SWIP ）, Ninxia Non-ferrous Metal Co. Itd and Chinese Institute of Engineering Physics, as well as Nuclear Power Institute of China has been established. Up to now, several series of interlayer for hot isostatic press （ HIP ） connection of beryllium and CuCrZr alloy have been tested. They are titanium film or coating, Cu coating and Al or AISiMg alloy etc. The bonding strength （tensile or shear strength ） of HIPed Be/Cu joints is up to 100 MPa.展开更多
针对不同领域仿真工具模型的重用互换需求,欧洲仿真界提出了功能样机可交换接口规范Functional Mock-up Interface for Model Exchange(FMI)。基于FMI接口规范,详细分析了功能样机可交换模型的结构与功能,研究了规范对仿真模型变量、方...针对不同领域仿真工具模型的重用互换需求,欧洲仿真界提出了功能样机可交换接口规范Functional Mock-up Interface for Model Exchange(FMI)。基于FMI接口规范,详细分析了功能样机可交换模型的结构与功能,研究了规范对仿真模型变量、方程和仿真算法的描述,并在多领域物理系统建模仿真平台MWorks中设计了FMI接口,实现了MWorks模型的重用,扩展了MWorks模型的使用范围。目前,MWorks是国内唯一支持该规范的建模仿真工具。展开更多
文摘The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is conducted in this paper. The principal THM characteristics of the bentonite are presented at first. A THM model is then presented to tackle the complex coupling behavior of the bentonite. The model of Alonso-Gens is incorporated to reproduce the mechanical behavior of the bentonite under unsaturated conditions. With the proposed model, numerical simulations of the China-mock-up test are carried out by using the code of LAGAMINE. The time variations associated with the temperature, degree of saturation, suction and swelling pressure of the compacted bentonite are studied. The results suggest that the proposed model is able to reproduce the mechanical behavior of the bentonite, and to predict moisture motion under coupled THM conditions.
文摘According to the preliminary concept of the high-level radioactive waste （HLW） repository in China, a large-scale mock-up facility, named China-Mock-Up was constructed in the laboratory of Beijing Research Institute of Uranium Geology （BRIUG）. A heater, which simulates a container of radioactive waste, is placed inside the compacted Gaomiaozi （GMZ）-Na-bentonite blocks and pellets. Water inflow through the barrier from its outer surface is used to simulate the intake of groundwater. The numbers of water injection pipes, injection pressure and the insulation layer were determined based on the nu- merical modeling simulations. The current experimental data of the facility are herein analyzed. The experiment is intended to evaluate the thermo-hydro-mechano-chemical （THMC） processes occurring in the compacted bentonite-buffer during the early stage of HLW disposal and to provide a reliable database for numerical modeling and further investigation of engineered barrier system （EBS）, and the design of HLW repository.
基金the financial supports from the ITER-National Magnetic Confinement Fusion Program(Nos.2014 GB123000 and 2010 GB109000)the National Natural Science Foundation of China(No.51172016)
文摘In a fusion reactor,due to high heat flux（HHF） loads,the plasma facing components（PFCs） will suffer severe thermal shock.In this paper,the temperature distribution and thermal-stress field of tungsten armor under HHF loads were investigated by the method of finite element modeling and simulating.The orthogonal experiment and range analysis were employed to compare the influence degree of four representative factors：steady-state heat flux;thickness of tungsten armor;inner diameter of cooling tube and the coefficient of convection heat transfer（CCHF） of cooling water,on thermal shock behavior tungsten mock-ups,and then get an optimization model to conduct the transient heat flux experiment.The final simulation results indicated that the steady-state heat flux and the thickness of W armor are the main influential factors for the maximum temperature of mock-ups.Furthermore,the influence of transient thermal shock all mainly concentrates on the shallow surface layer of tungsten（about 500 μm） under different transient heat flux（duration 0.5 ms）.The results are useful for the structural design and the optimization of tungsten based plasma facing materials for the demonstration reactor（DEMO） or other future reactors.
文摘After introducing the present status of digital mock-up (DMU) technology in product development and research,the modeling and its key technologies in product design are described. The architecture of digital design platform system for main DMU model is developed. Based on the architecture,a method of skeleton design has been applied to the development of digital design system.
基金This work was financially supported by the National High-Tech Research and Development Program of China ("863" Program)(No.2003AA305340)
文摘Tungsten is a promising candidate for plasma-facing materials to cover the surface of the divertor plate in the design of an international thermonuclear experimental reactor （ITER）. Copper as a heat sink material serves to transfer heat excellently. Divertor mock-ups with W/Cu graded interlayers were designed to reduce thermal stresses. Thermally induced stresses and temperature in a W/Cu divertor mock-up were analyzed using the finite element method. The graded structures with different exponents p and thick- nesses were designed and discussed. The conclusions drawn from these analyses are that thermal stresses reach the minimum and the temperature is suitable when exponent p is 1.5 and the thickness of five graded interlayers is 5 mm.
文摘China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is the key engineering technology of ITER construction and might be one of the crucial issues of the future reactor too. Since 2004, an associated research team including Southwestern Institute of Physics （ SWIP ）, Ninxia Non-ferrous Metal Co. Itd and Chinese Institute of Engineering Physics, as well as Nuclear Power Institute of China has been established. Up to now, several series of interlayer for hot isostatic press （ HIP ） connection of beryllium and CuCrZr alloy have been tested. They are titanium film or coating, Cu coating and Al or AISiMg alloy etc. The bonding strength （tensile or shear strength ） of HIPed Be/Cu joints is up to 100 MPa.
文摘针对不同领域仿真工具模型的重用互换需求,欧洲仿真界提出了功能样机可交换接口规范Functional Mock-up Interface for Model Exchange(FMI)。基于FMI接口规范,详细分析了功能样机可交换模型的结构与功能,研究了规范对仿真模型变量、方程和仿真算法的描述,并在多领域物理系统建模仿真平台MWorks中设计了FMI接口,实现了MWorks模型的重用,扩展了MWorks模型的使用范围。目前,MWorks是国内唯一支持该规范的建模仿真工具。
