High-purity(99%)carbon nanocoils(CNCs)have been synthesized by using porousα-Fe2O3/SnO2 catalyst.The yield of CNCs reaches 9,098%after a 6 h growth.This value is much higher than the previously reported data,indicati...High-purity(99%)carbon nanocoils(CNCs)have been synthesized by using porousα-Fe2O3/SnO2 catalyst.The yield of CNCs reaches 9,098%after a 6 h growth.This value is much higher than the previously reported data,indicating that this method is promising to synthesize high-purity CNCs on a large scale.It is considered that an appropriate proportion of Fe and Sn,proper particle size distribution,and a loose-porous aggregate structure of the catalyst are the key points to the high-purity growth of CNCs.Benefiting from the high-purity preparation,a CNC Buckypaper was successfully prepared and the electrical,mechanical,and electrochemical properties were investigated comprehensively.Furthermore,as one of the practical applications,the CNC Buckypaper was successfully utilized as an efficient adsorbent for the removal of methylene blue dye from wastewater with an adsorption efficiency of 90.9%.This study provides a facile and economical route for preparing high-purity CNCs,which is suitable for large-quantity production.Furthermore,the fabrication of macroscopic CNC Buckypaper provides promising alternative of adsorbent or other practical applications.展开更多
The sensitivity and the recovery behavior of SnO_2-based gas sensor prepared from a commercial SnO_2 powder were tested under the low concentration of DMMP(0.5μg/g) in the flow system at 350℃.In order to improve the...The sensitivity and the recovery behavior of SnO_2-based gas sensor prepared from a commercial SnO_2 powder were tested under the low concentration of DMMP(0.5μg/g) in the flow system at 350℃.In order to improve the sensitivity of the sensor,promoters such as NiO,Nb_2O_5,MoO_3,and Sb_2O_3 were added into SnO_2 powder.The sensitivities were increased up to 80% from 50% but they were not recovered.Only the SnO2-based gas sensor promoted with MoO_3 and Sb_2O_3 was recovered after detection of DMMP,although the recovery rate was slow.In particular,the SnO_2-based sensor promoted with 5wt% of MoO_3 and 1wt% of Sb_2O_3 simultaneously showed an complete recovery ability,though its sensitivity was 40% which was lower than that of SnO_2 gas sensor without promoters.This ability was discussed in terms of catalytic roles of promoters.展开更多
The surface plasmonic resonance(SPR)effect of Bi can effectively improve the light absorption abilities and photogenerated charge carrier separation rate.In this study,a novel ternary heterojunction of g-C3N4/Bi2MoO6/...The surface plasmonic resonance(SPR)effect of Bi can effectively improve the light absorption abilities and photogenerated charge carrier separation rate.In this study,a novel ternary heterojunction of g-C3N4/Bi2MoO6/Bi(CN/BMO/Bi)hollow microsphere was successfully fabricated through solvothermal and in situ reduction methods.The results revealed that the optimal ternary 0.4 CN/BMO/9 Bi photocatalyst exhibited the highest photocatalytic efficiency toward rhodamine B(RhB)degradation with nine times that of pure BMO.The DRS and valence band of the X-ray photoelectron spectroscopy spectrum demonstrate that the band structure of 0.4 CN/BMO/9 Bi is a z-scheme structure.Quenching experiments also provided solid evidence that the·O^2-(at-0.33 eV)is the main species during dye degradation,and the conduction band of g-C3N4 is only the reaction site,demonstrating that the transfer of photogenerated charge carriers of g-C3N4/Bi2 MoO 6/Bi is through an indirect z-scheme structure.Thus,the enhanced photocatalytic performance was mainly ascribed to the synergetic effect of heterojunction structures between g-C3N4 and Bi2MoO6 and the SPR effect of Bi doping,resulting in better optical absorption ability and a lower combination rate of photogenerated charge carriers.The findings in this work provide insight into the synergism of heterostructures and the SPR absorption ability in wastewater treatment.展开更多
A nanoporous MoO3/ZrO2 mixed oxide was hydrothermally synthesized by hydrolyzing zirconium isopropoxide in the presence of a cationic surfactant, eetyltrimethylammonium bromide（CTAB）. The crystal structure and the a...A nanoporous MoO3/ZrO2 mixed oxide was hydrothermally synthesized by hydrolyzing zirconium isopropoxide in the presence of a cationic surfactant, eetyltrimethylammonium bromide（CTAB）. The crystal structure and the acidity of the obtained nanoporous MoO3/ZrO2 mixed oxide were determined by means of XRD, N2 adsorption-desorption and NH3-TPD, respectively. The isobutane/butene alkylation over the MoO3/ZrO2 catalyst was carried out in a fixed bed reactor. The results reveal that ZrO2 in MoO3/ZrO2 exists mainly in the tetragonal phase, and the catalyst samples possess large specific surface areas as well as moderate acidity for isobutane/butene alkylation. Compared with samples prepared by impregnation and sol-gel processes, MoO3/ZrO2 mixed oxide samples prepared in this work have a better catalytic activity.展开更多
The effect of molybdenum oxide on the activity and durability of Ce O2-Ti O2 catalyst for NO reduction by NH3 was examined. It was found that the introduction of Mo could improve the low-temperature NH3-SCR activity a...The effect of molybdenum oxide on the activity and durability of Ce O2-Ti O2 catalyst for NO reduction by NH3 was examined. It was found that the introduction of Mo could improve the low-temperature NH3-SCR activity and SO2/H2 O durability of the Ce O2-Ti O2 catalyst and an optimal loading of Mo was 4?wt.%. The best Mo O3/Ce O2-Ti O2 catalyst displayed over 90% NO conversion from 200 °C to 400 °C and obtained 4-fold increase in NO conversion compared to Ce O2-Ti O2 at 150 °C. The characterization results revealed that the number of Br?nsted acid sites over Mo O3/Ce O2-Ti O2 was significantly increased, and the adsorption of nitrate species was dramatically weakened because of the coverage of Mo O3, which were favorable for the high NH3-SCR performance. It is believed that the Mo O3/Ce O2-Ti O2 catalyst is a suitable substitute for the NH3-SCR reaction.展开更多
In this study, different methods were used to prepare MoO3/ZrO2 catalysts for sulfur resistant methanation reaction. It was found that MoO3/ZrO2 catalyst prepared by one-step co-precipitation method achieved high meth...In this study, different methods were used to prepare MoO3/ZrO2 catalysts for sulfur resistant methanation reaction. It was found that MoO3/ZrO2 catalyst prepared by one-step co-precipitation method achieved high methanation performance. CO conversion could reach up to 90% on 25 wt% MoO3/ZrO2 catalyst, much higher than that on the conventional 25 wt% MoO3/Al2O3 catalyst. The Mo-based catalysts were characterized by XRF, XRD, Raman, BET, TEM and H2-TPR etc. It was found that MoO3 particles were highly dispersed on ZrO2 support for 25 wt% MoO3/ZrO2 catalyst prepared at 65-85℃ because of its relatively larger pore size, which contributed to a high CO conversion. Meanwhile, when MoO3 loading exceeded the monolayer coverage, the formed crystalline MoO3 and ZrM020g might block the micropores of the catalyst and make the methanation activity declined. These results are useful for preparing highly efficient catalyst for CO methanation process.展开更多
This paper reviews the recent research progress in the hetero-nanostructure of silver nanoparticles on MOx (M=Mo, Ti and Si). It describes the general synthesis of hetero-nanostructure of silver nanoparticles on MOx, ...This paper reviews the recent research progress in the hetero-nanostructure of silver nanoparticles on MOx (M=Mo, Ti and Si). It describes the general synthesis of hetero-nanostructure of silver nanoparticles on MOx, and then outlines the interesting catalytic and sensing properties found in these hetero-nanostructures of silver nanoparticles on MOx.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51661145025,51972039,and 51803018)
文摘High-purity(99%)carbon nanocoils(CNCs)have been synthesized by using porousα-Fe2O3/SnO2 catalyst.The yield of CNCs reaches 9,098%after a 6 h growth.This value is much higher than the previously reported data,indicating that this method is promising to synthesize high-purity CNCs on a large scale.It is considered that an appropriate proportion of Fe and Sn,proper particle size distribution,and a loose-porous aggregate structure of the catalyst are the key points to the high-purity growth of CNCs.Benefiting from the high-purity preparation,a CNC Buckypaper was successfully prepared and the electrical,mechanical,and electrochemical properties were investigated comprehensively.Furthermore,as one of the practical applications,the CNC Buckypaper was successfully utilized as an efficient adsorbent for the removal of methylene blue dye from wastewater with an adsorption efficiency of 90.9%.This study provides a facile and economical route for preparing high-purity CNCs,which is suitable for large-quantity production.Furthermore,the fabrication of macroscopic CNC Buckypaper provides promising alternative of adsorbent or other practical applications.
文摘The sensitivity and the recovery behavior of SnO_2-based gas sensor prepared from a commercial SnO_2 powder were tested under the low concentration of DMMP(0.5μg/g) in the flow system at 350℃.In order to improve the sensitivity of the sensor,promoters such as NiO,Nb_2O_5,MoO_3,and Sb_2O_3 were added into SnO_2 powder.The sensitivities were increased up to 80% from 50% but they were not recovered.Only the SnO2-based gas sensor promoted with MoO_3 and Sb_2O_3 was recovered after detection of DMMP,although the recovery rate was slow.In particular,the SnO_2-based sensor promoted with 5wt% of MoO_3 and 1wt% of Sb_2O_3 simultaneously showed an complete recovery ability,though its sensitivity was 40% which was lower than that of SnO_2 gas sensor without promoters.This ability was discussed in terms of catalytic roles of promoters.
基金financially supported by the Science Foundation of China University of Petroleum,Beijing(2462017YJRC048,2462018BJC005)the National Natural Science Foundation of China(51802351)~~
文摘The surface plasmonic resonance(SPR)effect of Bi can effectively improve the light absorption abilities and photogenerated charge carrier separation rate.In this study,a novel ternary heterojunction of g-C3N4/Bi2MoO6/Bi(CN/BMO/Bi)hollow microsphere was successfully fabricated through solvothermal and in situ reduction methods.The results revealed that the optimal ternary 0.4 CN/BMO/9 Bi photocatalyst exhibited the highest photocatalytic efficiency toward rhodamine B(RhB)degradation with nine times that of pure BMO.The DRS and valence band of the X-ray photoelectron spectroscopy spectrum demonstrate that the band structure of 0.4 CN/BMO/9 Bi is a z-scheme structure.Quenching experiments also provided solid evidence that the·O^2-(at-0.33 eV)is the main species during dye degradation,and the conduction band of g-C3N4 is only the reaction site,demonstrating that the transfer of photogenerated charge carriers of g-C3N4/Bi2 MoO 6/Bi is through an indirect z-scheme structure.Thus,the enhanced photocatalytic performance was mainly ascribed to the synergetic effect of heterojunction structures between g-C3N4 and Bi2MoO6 and the SPR effect of Bi doping,resulting in better optical absorption ability and a lower combination rate of photogenerated charge carriers.The findings in this work provide insight into the synergism of heterostructures and the SPR absorption ability in wastewater treatment.
文摘A nanoporous MoO3/ZrO2 mixed oxide was hydrothermally synthesized by hydrolyzing zirconium isopropoxide in the presence of a cationic surfactant, eetyltrimethylammonium bromide（CTAB）. The crystal structure and the acidity of the obtained nanoporous MoO3/ZrO2 mixed oxide were determined by means of XRD, N2 adsorption-desorption and NH3-TPD, respectively. The isobutane/butene alkylation over the MoO3/ZrO2 catalyst was carried out in a fixed bed reactor. The results reveal that ZrO2 in MoO3/ZrO2 exists mainly in the tetragonal phase, and the catalyst samples possess large specific surface areas as well as moderate acidity for isobutane/butene alkylation. Compared with samples prepared by impregnation and sol-gel processes, MoO3/ZrO2 mixed oxide samples prepared in this work have a better catalytic activity.
基金supported by the National Natural Science Foundation of China(21773106,21707066,21677069,and 21806077)the China Postdoctoral Science Foundation(2018M642206)~~
文摘The effect of molybdenum oxide on the activity and durability of Ce O2-Ti O2 catalyst for NO reduction by NH3 was examined. It was found that the introduction of Mo could improve the low-temperature NH3-SCR activity and SO2/H2 O durability of the Ce O2-Ti O2 catalyst and an optimal loading of Mo was 4?wt.%. The best Mo O3/Ce O2-Ti O2 catalyst displayed over 90% NO conversion from 200 °C to 400 °C and obtained 4-fold increase in NO conversion compared to Ce O2-Ti O2 at 150 °C. The characterization results revealed that the number of Br?nsted acid sites over Mo O3/Ce O2-Ti O2 was significantly increased, and the adsorption of nitrate species was dramatically weakened because of the coverage of Mo O3, which were favorable for the high NH3-SCR performance. It is believed that the Mo O3/Ce O2-Ti O2 catalyst is a suitable substitute for the NH3-SCR reaction.
基金supported by the Tianjin Municipal Science and Technology Commission(14JCZDJC37500)
文摘In this study, different methods were used to prepare MoO3/ZrO2 catalysts for sulfur resistant methanation reaction. It was found that MoO3/ZrO2 catalyst prepared by one-step co-precipitation method achieved high methanation performance. CO conversion could reach up to 90% on 25 wt% MoO3/ZrO2 catalyst, much higher than that on the conventional 25 wt% MoO3/Al2O3 catalyst. The Mo-based catalysts were characterized by XRF, XRD, Raman, BET, TEM and H2-TPR etc. It was found that MoO3 particles were highly dispersed on ZrO2 support for 25 wt% MoO3/ZrO2 catalyst prepared at 65-85℃ because of its relatively larger pore size, which contributed to a high CO conversion. Meanwhile, when MoO3 loading exceeded the monolayer coverage, the formed crystalline MoO3 and ZrM020g might block the micropores of the catalyst and make the methanation activity declined. These results are useful for preparing highly efficient catalyst for CO methanation process.
基金supported by the National Natural Science Foundation of China (50972130, 20701033, 50772100 & 10874153)Qianjiang Talent Program of Zhejiang Province (QJD1002001)+1 种基金China Postdoctoral Science Foundation (201003048 & 20090450292)Open Project Program of State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University
文摘This paper reviews the recent research progress in the hetero-nanostructure of silver nanoparticles on MOx (M=Mo, Ti and Si). It describes the general synthesis of hetero-nanostructure of silver nanoparticles on MOx, and then outlines the interesting catalytic and sensing properties found in these hetero-nanostructures of silver nanoparticles on MOx.
