期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
Giant reversible barocaloric effects with high thermal cycle stability in epoxybonded(MnCoGe)_(0.96)(CuCoSn)_(0.04) composite
1
作者 Yafei Kuang Kun Tao +7 位作者 Bo Yang Peng Tong Yan Zhang Zhigang Sun Kewei Zhang Dunhui Wang Jifan Hu Liang Zuo 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2024年第11期2528-2534,共7页
Hexagonal MnMX-based(M=Co or Ni,X=Si or Ge)alloys exhibit giant reversible barocaloric effects.However,giant volume expansion would result in the as-cast MnMX ingots fragmenting into powders,and inevitably bring the d... Hexagonal MnMX-based(M=Co or Ni,X=Si or Ge)alloys exhibit giant reversible barocaloric effects.However,giant volume expansion would result in the as-cast MnMX ingots fragmenting into powders,and inevitably bring the deterioration of mechanical properties and formability.Grain fragmentation can bring degradation of structural transformation entropy change during cyclic application and removal of pressure.In this paper,giant reversible barocaloric effects with high thermal cycle stability can be achieved in the epoxy bonded(MnCoGe)0.96(CuCoSn)0.04 composite.Giant reversible isothermal entropy change of 43.0 J·kg^(−1)·K^(−1) and adiabatic temperature change from barocaloric effects(ΔT_(BCE))of 15.6 K can be obtained within a wide temperature span of 30 K at 360 MPa,which is mainly attributed to the integration of the change in the transition temperature driven by pressure of−101 K·GPa^(−1) and suitable thermal hysteresis of 11.1 K.Further,the variation of reversibleΔ_(TBCE) against the applied hydrostatic pressure reaches up to 43 K·GPa^(−1),which is at the highest level among the other reported giant barocaloric compounds.More importantly,after 60 thermal cycles,the composite does not break and the calorimetric curves coincide well,demonstrating good thermal cycle stability. 展开更多
关键词 barocaloric effects cycle stability reversible isothermal entropy change reversible adiabatic temperature change mncoge alloys
在线阅读 下载PDF
铁替代部分锰对MnCoGe_(1.02)合金马氏体相变和磁性能的影响
2
作者 高丽 陶子豪 +1 位作者 冯影 王树 《机械工程材料》 CAS CSCD 北大核心 2021年第4期46-50,56,共6页
利用铁替代MnCoGe_(1.02)合金中部分锰,采用电弧熔炼方法制备了Mn1-xFexCoGe_(1.02)(x=0,0.01,0.03,0.06,0.09)合金,研究了合金的物相组成、晶体结构、马氏体相变和磁热效应。结果表明:用铁替代部分锰后,合金的晶格参数和晶胞体积均随... 利用铁替代MnCoGe_(1.02)合金中部分锰,采用电弧熔炼方法制备了Mn1-xFexCoGe_(1.02)(x=0,0.01,0.03,0.06,0.09)合金,研究了合金的物相组成、晶体结构、马氏体相变和磁热效应。结果表明:用铁替代部分锰后,合金的晶格参数和晶胞体积均随铁含量的升高基本呈降低趋势,室温下MnCoGe_(1.02)合金呈正交马氏体和六角奥氏体的两相结构,x=0.01和x=0.03时合金均为单一的正交马氏体相结构,x=0.06和x=0.09时合金为单一的六角奥氏体相结构;合金的马氏体相变温度随铁含量的增加先升高后降低,x=0.03时合金的相变温度最高;铁的添加有效提高了合金的磁化强度差,x=0.03时合金具有最大的磁化强度差,且在5 T、315 K时该合金的磁熵变最大,为18.7 J·K^(-1)·kg^(-1),说明该合金具有较大的磁热效应。 展开更多
关键词 mncoge磁性材料 磁热效应 马氏体相变
在线阅读 下载PDF
固态磁性制冷剂MnCoGe合金的研究进展 被引量:1
3
作者 袁维 包立夫 《科技视界》 2016年第21期62-62,120,共2页
磁制冷技术是一种绿色环保,高效节能的制冷技术。固态制冷剂Mn Co Ge合金在相变时的巨大晶格体积变化带来的热效应,使其成为室温磁致冷工质的有力竞争者之一。本文注重对提高Mn Co Ge合金磁性能的方法进行综述,为该合金在实际工业制冷... 磁制冷技术是一种绿色环保,高效节能的制冷技术。固态制冷剂Mn Co Ge合金在相变时的巨大晶格体积变化带来的热效应,使其成为室温磁致冷工质的有力竞争者之一。本文注重对提高Mn Co Ge合金磁性能的方法进行综述,为该合金在实际工业制冷应用中提供参考。 展开更多
关键词 固态制冷剂 mncoge合金 磁制冷
在线阅读 下载PDF
Tuning Martensitic Phase Transition by Non-Magnetic Atom Vacancy in MnCoGe Alloys and Related Giant Magnetocaloric Effect
4
作者 包立夫 黄文登 任亚杰 《Chinese Physics Letters》 SCIE CAS CSCD 2016年第7期161-164,共4页
The effects of non-magnetic atom vacancy on structural, martensitic phase transitions and the corresponding magnetocMoric effect in MnCoGel-x alloys are investigated using x-ray diffraction and magnetic measurements. ... The effects of non-magnetic atom vacancy on structural, martensitic phase transitions and the corresponding magnetocMoric effect in MnCoGel-x alloys are investigated using x-ray diffraction and magnetic measurements. The introduction of non-magnetic atom vacancy leads to the decrease of the martensitic transition temperature and realizes a temperature window where magnetic and martensitic phase transitions can be tuned together. Moreover, the giant magnetocaloric effect accompanied with the coupled magnetic-structural transition is ob- tained. It is observed that the peak values of magnetic entropy change of MnCoGeo.97 are about -13.9, -35.1 and -47.4J.kg-1K-1 for △H = 2, 5, 7T, respectively. 展开更多
关键词 of on for by Tuning Martensitic Phase Transition by Non-Magnetic Atom Vacancy in mncoge Alloys and Related Giant Magnetocaloric Effect in is that
原文传递
稀土元素La在MnCoGe体系中的掺杂效应 被引量:2
5
作者 张红国 石晋豪 +3 位作者 Hidayah Andi Imam 吴正 乔文静 岳明 《中国科学:物理学、力学、天文学》 CSCD 北大核心 2021年第6期123-130,共8页
MnCoGe是MM′X型马氏体相变材料体系中最具代表性的研究对象之一.由于其结构相变温度高于自身的磁有序温度,研究者采用了各种调控方法来降低结构相变温度以实现磁共结构耦合.但是,针对稀土元素在这类体系中的掺杂效应较少被报道.因此,... MnCoGe是MM′X型马氏体相变材料体系中最具代表性的研究对象之一.由于其结构相变温度高于自身的磁有序温度,研究者采用了各种调控方法来降低结构相变温度以实现磁共结构耦合.但是,针对稀土元素在这类体系中的掺杂效应较少被报道.因此,本文研究了Mn_(1-x)La_(x)CoGe (x=0, 0.01, 0.02, 0.03, 0.05)系列化合物的结构与磁性. La的加入引起主相中Mn和Ge元素的成分缺失,使得马氏体转变温度逐渐降低,实现了磁共结构耦合.然而,由于La导致元素成分缺失的能力有限,进一步增加掺杂量导致析出更多的第二相但却没有引起相变温度的持续降低.在微观组织中观察到主相被针状第二相分隔成小"畴",这可能是高La含量样品中存在大量残余奥氏体相的原因. 展开更多
关键词 MM′X mncoge 磁结构耦合 磁热效应 稀土元素
原文传递
MnCo0.95Cu0.05Ge合金的磁性及其磁热效应 被引量:1
6
作者 高湉 齐宁宁 +4 位作者 孙超 吴梅 刘永生 徐燕 周桃 《中国有色金属学报》 EI CAS CSCD 北大核心 2018年第8期1597-1602,共6页
采用真空电弧炉熔炼法制备MnCo_(0.95)Cu_(0.05)Ge合金,并分别利用X射线衍射和物性测量系统研究了其结构、磁性和磁热效应。室温下的X射线衍射数据表明,样品呈现六角(Ni_2In型)单相结构;随着温度降低,样品发生顺磁-铁磁二级相变,其居里... 采用真空电弧炉熔炼法制备MnCo_(0.95)Cu_(0.05)Ge合金,并分别利用X射线衍射和物性测量系统研究了其结构、磁性和磁热效应。室温下的X射线衍射数据表明,样品呈现六角(Ni_2In型)单相结构;随着温度降低,样品发生顺磁-铁磁二级相变,其居里温度T_C约为257 K。T_C以下样品呈现强铁磁性,这主要是由次晶格Mn-Mn原子间的交换作用引起的。在T_C附近,合金样品显示了巨大的磁热效应;当外加磁场变化为2、5和7 T时,最大磁熵变分别达到了4.49、10.19和13.64 J/(kg·K),相对应的制冷量分别为103.27、249.66和347.82 J/kg。 展开更多
关键词 mncoge合金 磁热效应 铁磁性能 磁化曲线
在线阅读 下载PDF
铟替代部分锗对锰钴锗合金磁结构相变及磁热效应的影响
7
作者 包立夫 武荣荣 张虎 《机械工程材料》 CAS CSCD 北大核心 2016年第5期67-71,76,共6页
为研究铟替代部分锗对锰钴锗合金磁结构相变与磁热效应的影响,采用电弧熔炼方法制备了Mn_1Co_1Ge_1和Mn_1Co_1Ge_(0.99)In_(0.01)合金,研究了这两种合金的物相、相变和磁热效应,以及升、降温测试方式得到的Mn_1Co_1Ge_(0.99)In_(0.01)... 为研究铟替代部分锗对锰钴锗合金磁结构相变与磁热效应的影响,采用电弧熔炼方法制备了Mn_1Co_1Ge_1和Mn_1Co_1Ge_(0.99)In_(0.01)合金,研究了这两种合金的物相、相变和磁热效应,以及升、降温测试方式得到的Mn_1Co_1Ge_(0.99)In_(0.01)合金的磁化曲线。结果表明:铟替代部分锗后,合金中并未产生杂相,其相变特性由二级磁相变变为一级磁结构相变;Mn_1Co_1Ge_(0.99)In_(0.01)合金在不同的相变方向上具有不同的磁滞后行为;升温测试时,Mn_1Co_1Ge_(0.99)In_(0.01)合金在5,7T磁场强度下的磁熵变峰值分别为52.2,64.1J·kg^(-1)·K^(-1),降温测试时的磁熵变峰值分别为40.8,50.9J·kg^(-1)·K^(-1);升温测试时,Mn_1Co_1Ge_(0.99)In_(0.01)合金在7T磁场强度下的制冷能力为477J·kg^(-1),降温测试时为264.4J·kg^(-1)。 展开更多
关键词 锰钴锗合金 磁热效应 磁结构相变 制冷能力
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部