Mn-based oxides have been regarded as a promising family of cathode materials for high-performance lithium-ion batteries,but the practical applications have been limited because of severe capacity deterioration(such a...Mn-based oxides have been regarded as a promising family of cathode materials for high-performance lithium-ion batteries,but the practical applications have been limited because of severe capacity deterioration(such as Li Mn O_(2)and Li Mn_(2)O_(4))as well as further complications from successive structure changes during cycling,low initial coulombic efficiency(such as Li-rich cathode)and oxidization of organic carbonate solvents at high charge potential(such as Li Ni0.5 Mn1.5 O4).Large amounts of efforts have been concentrated on resolving these issues towards practical applications,and many vital progresses have been carried out.Hence,the primary target of this review is focused on different proposed strategies and breakthroughs to enhance the rate performance and cycling stability of nanostructured Mn-based oxide cathode materials for Li-ion batteries,including morphology control,ion doping,surface coatings,composite construction.The combination of delicate architectures with conductive species represents the perspective ways to enhance the conductivity of the cathode materials and further buffer the structure transformation and strain during cycling.At last,based on the elaborated progress,several perspectives of Mn-based oxide cathodes are summarized,and some possible attractive strategies and future development directions of Mn-based oxide cathodes with enhanced electrochemical properties are proposed.The review will offer a detailed introduction of various strategies enhancing electrochemical performance and give a novel viewpoint to shed light on the future innovation in Mn-based oxide cathode materials,which benefits the design and construction of high-performance Mn-based oxide cathode materials in the future.展开更多
The high-rate cyclability of Li-rich Mn-based oxide(LMO)is highly limited by the electrochemical polarization resulting from the slow kinetic of the Li2MnO3 phase.Herein,the Prussian blue(PB)coating layer with specifi...The high-rate cyclability of Li-rich Mn-based oxide(LMO)is highly limited by the electrochemical polarization resulting from the slow kinetic of the Li2MnO3 phase.Herein,the Prussian blue(PB)coating layer with specific redox potential is introduced as a functionalized interface to overcome the side effect and the escaping of O on the surface of LMO,especially its poor rate capability.In detail,the PB layer can restrict the large polarization of LMO by sharing overloaded current at a high rate due to the synchronous redox of PB and LMO.Consequently,an enhanced high rate performance with capacity retention of 87.8%over 300 cycles is obtained,which is superior to 50.5%of the pristine electrode.Such strategies on the high-rate cyclability of Li-rich Mn-based oxide compatible with good low-rate performances may attract great attention for pursuing durable performances.展开更多
A pilot-scale filtration system was adopted to prepare filter media with catalytic activity to remove manganese(Mn^(2+))and ammonium(NH_(4)^(+)-N).Three different combinations of oxidants(KMnO_(4)and K_(2)FeO_(4))and ...A pilot-scale filtration system was adopted to prepare filter media with catalytic activity to remove manganese(Mn^(2+))and ammonium(NH_(4)^(+)-N).Three different combinations of oxidants(KMnO_(4)and K_(2)FeO_(4))and reductants(MnSO_(4)and FeCl_(2))were used during the start-up period.Filter R3 started up by KMnO_(4)and FeCl_(2)(Mn^(7+)→MnO_(x))exhibited excellent catalytic property,and the NH_(4)^(+)-N and Mn^(2+)removal efficiency reached over 80%on the 10th and 35th days,respectively.Filter R1 started up by K_(2)FeO_(4)and MnSO_(4)(MnO_(x)←Mn^(2+))exhibited the worst catalytic property.Filter R2 started up by KMnO_(4)and MnSO_(4)(Mn^(7+)→MnO_(x)←Mn^(2+))were in between.According to Zeta potential results,the Mn-based oxides(MnO_(x))formed by Mn^(7+)→MnO_(x)performed the highest pHIEP and pHPZC.The higher the pHIEP and pHPZC,the more unfavorable the cation adsorption.However,it was inconsistent with its excellent Mn^(2+)and NH_(4)^(+)-N removal abilities,implying that catalytic oxidation played a key role.Combined with XRD and XPS analysis,the results showed that the MnO_(x)produced by the reduction of KMnO_(4)showed early formation of buserite crystals,high degree of amorphous,high content of Mn3+and lattice oxygen with the higher activity to form defects.The above results showed that MnO_(x)produced by the reduction of KMnO_(4)was more conducive to the formation of active species for catalytic oxidation of NH_(4)^(+)-N and Mn^(2+)removal.This study provides new insights on the formation mechanisms of the active MnO_(x)that could catalytic oxidation of NH_(4)^(+)-N and Mn^(2+).展开更多
The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by ...The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by the sluggish Na^(+)kinetics and the phase transitions upon cycling.Herein,we establish the thermodynamically stable phase diagram of various Mn-based oxide composites precisely controlled by sodium content tailoring strategy coupling with co-doping and solid-state reaction.The chemical environment of the P2/P'3 and P2/P3 biphasic composites indicate that the charge compensation mechanism stems from the cooperative contribution of anions and cations.Benefiting from the no phase transition to scavenge the structure strain,P2/P'3 electrode can deliver long cycling stability(capacity retention of 73.8%after 1000 cycles at 10 C)and outstanding rate properties(the discharge capacity of 84.08 mA h g^(-1)at 20 C)than P2/P3 electrode.Furthermore,the DFT calculation demonstrates that the introducing novel P'3 phase can significantly regulate the Na^(+)reaction dynamics and modify the local electron configuration of Mn.The effective phase engineering can provide a reference for designing other high-performance electrode materials for Na-ion batteries.展开更多
The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of thes...The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of these materials is impeded by two main factors:the MnO_(6) structure distortion induced by the Jahn-Teller(J-T)effect of Mn^(3+),and the unfavorable phase transitions that occur during the insertion and extraction of Na^(+).Here,we present a strategy to improve structural stability by incorporating cost-effective,robust Al-O bonds.This approach induces localized adjustments in the electronic structu re and a pinning effect,which limits the deformation of the transition metal(TM)layers,strengthens the electrostatic bonding within the TM layers,and expands the Na layer spacing.Consequently,the Na_(0.67)Fe_(0.4)Mn_(0.54)Al_(0.06)O_(2) cathode demonstrates a capacity of 168.8 mAh g^(-1) at 0.1 C,maintaining89.2%of its original capacity after 200 cycles at 1 C.Through in situ electrochemical impedance spectroscopy(EIS)with dynamic resistance transformation(DRT)analysis,ex situ X-ray absorption spectroscopy(XAS),and in situ X-ray diffraction(XRD),the study demonstrates a reduction in the J-T effect,enhanced kinetic performance,and the inhibition of detrimental phase transitions.This study offers new avenues to the development and design of future low-cost Fe/Mn-based cathodes.展开更多
The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the ...The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.展开更多
Mn-based layered oxides(KMO)have emerged as one of the promising low-cost cathodes for potassiumion batteries(PIBs).However,due to the multiple-phase transitions and the distortion in the MnO6structure induced by the ...Mn-based layered oxides(KMO)have emerged as one of the promising low-cost cathodes for potassiumion batteries(PIBs).However,due to the multiple-phase transitions and the distortion in the MnO6structure induced by the Jahn-Teller(JT)effect associated with Mn-ion,the cathode exhibits poor structural stability.Herein,we propose a strategy to enhance structural stability by introducing robust metal-oxygen(M-O)bonds,which can realize the pinning effect to constrain the distortion in the transition metal(TM)layer.Concurrently,all the elements employed have exceptionally high crustal abundance.As a proof of concept,the designed K_(0.5)Mn_(0.9)Mg_(0.025)Ti_(0.025)Al_(0.05)O_(2)cathode exhibited a discharge capacity of approximately 100 mA h g^(-1)at 20 mA g^(-1)with 79%capacity retention over 50 cycles,and 73%capacity retention over 200 cycles at 200 mA g^(-1),showcased much better battery performance than the designed cathode with less robust M-O bonds.The properties of the formed M-O bonds were investigated using theoretical calculations.The enhanced dynamics,mitigated JT effect,and improved structural stability were elucidated through the in-situ X-ray diffractometer(XRD),in-situ electrochemical impedance spectroscopy(EIS)(and distribution of relaxation times(DRT)method),and ex-situ X-ray absorption fine structure(XAFS)tests.This study holds substantial reference value for the future design of costeffective Mn-based layered cathodes for PIBs.展开更多
In the realm of sodium-ion batteries(SIBs),Mn-based layered oxide cathodes have garnered considerable attention owing to their anionic redox reactions(ARRs).Compared to other types of popular sodium-ion cathodes,Mn-ba...In the realm of sodium-ion batteries(SIBs),Mn-based layered oxide cathodes have garnered considerable attention owing to their anionic redox reactions(ARRs).Compared to other types of popular sodium-ion cathodes,Mn-based layered oxide cathodes with ARRs exhibit outstanding specific capacity and energy density,making them promising for SIB applications.However,these cathodes still face some scientific challenges that need to be addressed.This review systematically summarizes the composition,structure,oxygen-redox mechanism,and performance of various types of Mn-based cathodes with ARRs,as well as the main scientific challenges they face,including sluggish ion diffusion,cationic migration,O_(2) release,and element dissolution.Currently,to resolve these challenges,efforts mainly focus on six aspects:synthesis methods,structural design,doped modification,electrolyte design,and surface engineering.Finally,this review provides new insights for future direction,encompassing both fundamental research,such as novel cathode types,interface optimization,and interdisciplinary research,and considerations from an industrialization perspective,including scalability,stability,and safety.展开更多
Propylene oxide(PO)is an important petrochemical materials used to produce downstream products such as propylene glycol(PG),polyether polyols,and dipropylene glycol(DPG).Among these,DPG is commonly used as a solvent f...Propylene oxide(PO)is an important petrochemical materials used to produce downstream products such as propylene glycol(PG),polyether polyols,and dipropylene glycol(DPG).Among these,DPG is commonly used as a solvent for fragrances,cosmetics,food additives,and detergents,and can also be served as a moisturizer in cosmetics,showing broad application prospects.The distribution of DPG isomers in the products synthesized from PO and PG has a significant impactΔrGΔrHΔfHθΔfGθPO+PG⇌DPG PO+DPG⇌TPG PG+PG⇌DPG+H_(2)O PG+DPG⇌TPG+H_(2)O on the quality of the products.Therefore,conducting thermodynamic calculation on the reaction of PO and PG to synthesize DPG can provide a theoretical basis for practical operations and product distribution regulation.So,in this paper,the thermodynamic parameters of PO,1,2-PG,H_(2)O,tripropylene glycol(TPG)and three isomers of DPG under different reaction conditions is calculated.Additionally,the,and lnK for four potential reactions at various reaction temperatures and pressures are calculated.By designing isodesmic reactions and combining the results of thermodynamic calculations,the and for the isomers of DPG are obtained,and the relative error is less than 7%.The results show that in the process of preparing DPG by PO and PG,when PO∶PG=1,the reaction temperature ranges from 298.15 to 413.15 K,and the pressure ranges from 101.325 to 506.625 kPa,the reactions of and are thermodynamically spontaneous.While the reactions of and are thermodynamically unspontaneous.The optimal reaction temperature and pressure are 413.15 K and 101.325 kPa.The thermodynamic stability of the three isomers is DPG1>DPG2>DPG3 under standard conditions.The accuracy of the computational results is verified through experimental design,and based on this,the factors affecting product distribution are analyzed.展开更多
Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon ...Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.展开更多
It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,...It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,and FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbents were prepared by coupling fly ash-based Si-Al carriers.The active components Fe-Ce-La oxides and Si-Al carriers were characterized by TPD,TG,XRF,BET and XPS,respectively.The effects of temperature,Si/Al ratio and FeCeLaO loading rate on the sulfur resistance were investigated.Results show that the SO_(2) promotes the arsenic removal of Fe_(2)O_(3),CeLaO and FeCeLaO.At 400℃,the arsenic removal efficiencies of the three oxides increase from 45.3%,72.5% and 81.3% without SO_(2) to 62.6%,80.5%and 91.0%,respectively.The SO_(2) inhibits the arsenic removal of La_(2)O_(2)CO_(3) and FeLaO,and the inhibition effect is pronounced at high temperatures.The sulfur poisoning resistance of Si-Al carriers increases with the increase of Si/Al ratio.When the Si/Al ratio is increased to 9.74,the arsenic removal efficiency in the SO_(2) environment is 13.9% higher than that in the absence of SO_(2).Introducing FeCeLaO active components is beneficial for enhancing the SO_(2) poisoning resistance of Si-Al carriers.The strong sulfur resistance of the FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbent results from multiple factors:protective effects of Ce on Fe,La and Al;sulfation-induced generation of Ce^(3+)and surface-adsorbed oxygen;and strong surface acidity of SiO_(2).展开更多
Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosi...Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosion resistance and the role of the oxide scale in corrosion environments.The corrosion resistance of CF-PHS with and without oxide scale was comprehensively evaluated by analyzing electrochemical processes and corrosion products,as well as characterizing the corroded oxide scale features,while comparing it with commercial 22MnB5 steel.The results indicate that CF-PHS exhibits superior corrosion resistance compared to 22MnB5 steel and the presence of oxide scale may have a negative influence on short-time corrosion resistance.The ultra-thin oxide scale is unable to effectively and timely mitigate pit propagation during the rapid electrochemical tests.Conversely,during the prolonged corrosion process,the oxide scale can still function as the physical barrier to provide protective effects,making the corrosion process develop more slowly and evenly.展开更多
Nitric oxide(NO)is a key vasodilator that regulates vascular pressure and blood flow.Tibetans have developed a"blunted"mechanism for regulating NO levels at high altitude,with GTP cyclohydrolase 1(GCH1)ident...Nitric oxide(NO)is a key vasodilator that regulates vascular pressure and blood flow.Tibetans have developed a"blunted"mechanism for regulating NO levels at high altitude,with GTP cyclohydrolase 1(GCH1)identified as a key candidate gene.Here,we present comprehensive genetic and functional analyses of GCH1,which exhibits strong Darwinian positive selection in Tibetans.We show that Tibetan-enriched GCH1 variants down-regulate its expression in the blood of Tibetans.Based on this observation,we generate the heterozygous Gch1 knockout(Gch1^(+/-))mouse model to simulate its downregulation in Tibetans.We find that under prolonged hypoxia,the Gch1^(+/-)mice have relatively higher blood NO and blood oxygen saturation levels compared with the wild-type(WT)controls,providing better oxygen supplies to the cardiovascular and pulmonary systems.Markedly,hypoxia-induced cardiac hypertrophy and pulmonary remodeling are significantly attenuated in the Gch1^(^(+/-))mice compared with the WT controls,likely due to the adaptive changes in molecular regulations related to metabolism,inflammation,circadian rhythm,extracellular matrix,and oxidative stress.This study sheds light on the role of GCH1 in regulating blood NO,contributing to the physiological adaptation of the cardiovascular and pulmonary systems in Tibetans at high altitude.展开更多
High-entropy oxides(HEOs)have emerged as a promising class of memristive materials,characterized by entropy-stabilized crystal structures,multivalent cation coordination,and tunable defect landscapes.These intrinsic f...High-entropy oxides(HEOs)have emerged as a promising class of memristive materials,characterized by entropy-stabilized crystal structures,multivalent cation coordination,and tunable defect landscapes.These intrinsic features enable forming-free resistive switching,multilevel conductance modulation,and synaptic plasticity,making HEOs attractive for neuromorphic computing.This review outlines recent progress in HEO-based memristors across materials engineering,switching mechanisms,and synaptic emulation.Particular attention is given to vacancy migration,phase transitions,and valence-state dynamics—mechanisms that underlie the switching behaviors observed in both amorphous and crystalline systems.Their relevance to neuromorphic functions such as short-term plasticity and spike-timing-dependent learning is also examined.While encouraging results have been achieved at the device level,challenges remain in conductance precision,variability control,and scalable integration.Addressing these demands a concerted effort across materials design,interface optimization,and task-aware modeling.With such integration,HEO memristors offer a compelling pathway toward energy-efficient and adaptable brain-inspired electronics.展开更多
Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,...Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.展开更多
Poly(phenylene oxide)(PPO)exhibits excellent dielectric properties,making it an ideal substrate for high-frequency,high-speed copper-clad laminates.The phenolic hydroxyl group at the end of PPO plays a key role in its...Poly(phenylene oxide)(PPO)exhibits excellent dielectric properties,making it an ideal substrate for high-frequency,high-speed copper-clad laminates.The phenolic hydroxyl group at the end of PPO plays a key role in its reactivity.Accurately quantifying the phenolic hydroxyl content in PPO is essential but challenging.In this study,we proposed a method for measuring the phenolic hydroxyl content of PPO using differential UV absorption spectroscopy.In alkaline solutions,the phenolic hydroxyl in PPO completely ionizes to form phenoxide ions,leading to a significant increase in UV absorbance at approximately 250 and 300 nm.Notably,the differential UV absorbance at approximately 300 nm was directly proportional to the phenolic hydroxyl concentration.Using 2,6-dimethylphenol as a standard,a calibration curve was established to relate the phenolic hydroxyl concentration to differential UV absorbance at approximately 300 nm,providing a precise and straightforward method for phenolic hydroxyl quantification in PPO with distinct advantages over conventional techniques.展开更多
This study explored the impact of sintering time and temperature on the synthesis and formation of high-entropy rare earth oxides(HEOs).By systematically varying the sintering conditions,a series of Lu_(2)Yb_(2)Tm_(2)...This study explored the impact of sintering time and temperature on the synthesis and formation of high-entropy rare earth oxides(HEOs).By systematically varying the sintering conditions,a series of Lu_(2)Yb_(2)Tm_(2)Er_(2)O_(12) samples was synthesized and their structural and chemical properties were analyzed using scanning electron microscopy(SEM)with energy-dispersive X-ray spectroscopy(EDS)elemental mapping,X-ray diffraction(XRD),high-resolution transmission electron microscopy(HRTEM),and X-ray photoelectron spectroscopy(XPS).According to XRD patterns,a single-phase cubic C-type structure is easier to form at higher sintering temperatures(1400-1500℃),with sharper peaks signifying better crystallinity.With longer sintering times improving grain development and homogeneity,SEM research reveals a change in morphology from spherical grains at lower temperatures(1100-1200℃)to blocky grains at higher temperatures(1300-1500℃).HRTEM pictures verified the nanoparticles'strong crystallinity,and at higher temperatures,the lattice fringes widen and become more distinct,indicating better atomic ordering and diffusion.Stable and uniform high-entropy oxide production is indicated by the XPS spectra,which shows uniform elemental distribution and consistent chemical states of the constituent elements with very slight variations in the oxygen peaks.The findings highlight how important the sintering temperature is for reaching the intended high-entropy phase,with higher temperatures promoting improved atomic diffusion and compositional homogeneity.The results open the door for the use of high-entropy rare earth oxides in sophisticated functional materials by offering insightful information on how to best synthesize them.展开更多
Magnetic resonance imaging(MRI)is one of the most widely used diagnostic techniques.Iron oxide nanoparticles,as a promising kind of contrast agents,have attracted intense research interest due to their low toxicity an...Magnetic resonance imaging(MRI)is one of the most widely used diagnostic techniques.Iron oxide nanoparticles,as a promising kind of contrast agents,have attracted intense research interest due to their low toxicity and superparamagnetism.However,it is still a great challenge to prepare ideal iron oxide based contrast agents with high uniformity,excellent water solubility and biocompatibility.In this paper,a novel water-soluble polymer ligand pentaerythritol tetrakis 3-mercaptopropionate-poly(N-vinyl-2-pyrrolidone)(PTMP-PVP)was used as a capping reagent to prepare iron oxide nanoparticles MIONs@PTMP-PVP through one-step co-precipitation of iron precursors in aqueous solution at 100℃.The obtained nanoparticles MIONs@PTMP-PVP had a small size and narrow size distribution,and they were found to be biocompatible as determined through CCK-8 assay and histology analysis.In vivo MRI study demonstrated that the obtained MIONs@PTMP-PVP can be potentially used as an effective T_(2)-weighted MRI contrast agent.展开更多
We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modi...We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.展开更多
基金financially supported by the National Natural Science Foundation of China(no.51672120)the Scientific Research Project of Mudanjiang Normal University(no.1355JG014)+1 种基金the Natural Science Foundation of Hebei Province of China(no.B2020501003)the Fundamental Research Funds for the Central Universities(no.N2023030)。
文摘Mn-based oxides have been regarded as a promising family of cathode materials for high-performance lithium-ion batteries,but the practical applications have been limited because of severe capacity deterioration(such as Li Mn O_(2)and Li Mn_(2)O_(4))as well as further complications from successive structure changes during cycling,low initial coulombic efficiency(such as Li-rich cathode)and oxidization of organic carbonate solvents at high charge potential(such as Li Ni0.5 Mn1.5 O4).Large amounts of efforts have been concentrated on resolving these issues towards practical applications,and many vital progresses have been carried out.Hence,the primary target of this review is focused on different proposed strategies and breakthroughs to enhance the rate performance and cycling stability of nanostructured Mn-based oxide cathode materials for Li-ion batteries,including morphology control,ion doping,surface coatings,composite construction.The combination of delicate architectures with conductive species represents the perspective ways to enhance the conductivity of the cathode materials and further buffer the structure transformation and strain during cycling.At last,based on the elaborated progress,several perspectives of Mn-based oxide cathodes are summarized,and some possible attractive strategies and future development directions of Mn-based oxide cathodes with enhanced electrochemical properties are proposed.The review will offer a detailed introduction of various strategies enhancing electrochemical performance and give a novel viewpoint to shed light on the future innovation in Mn-based oxide cathode materials,which benefits the design and construction of high-performance Mn-based oxide cathode materials in the future.
基金supported by the National Natural Science Foundation of China (51802261,52072298,and 52172228)the Natural Science Foundation of Shaanxi (2019GHJD-13 and 2020JC-41)+2 种基金the Natural Science Basic Research Plan in Shaanxi province of China (2019JLP-04)Xi'an Science and Technology Project of China (2019219714SYS012CG034)the foundation of National Key Laboratory (6142808200202),PR China.
文摘The high-rate cyclability of Li-rich Mn-based oxide(LMO)is highly limited by the electrochemical polarization resulting from the slow kinetic of the Li2MnO3 phase.Herein,the Prussian blue(PB)coating layer with specific redox potential is introduced as a functionalized interface to overcome the side effect and the escaping of O on the surface of LMO,especially its poor rate capability.In detail,the PB layer can restrict the large polarization of LMO by sharing overloaded current at a high rate due to the synchronous redox of PB and LMO.Consequently,an enhanced high rate performance with capacity retention of 87.8%over 300 cycles is obtained,which is superior to 50.5%of the pristine electrode.Such strategies on the high-rate cyclability of Li-rich Mn-based oxide compatible with good low-rate performances may attract great attention for pursuing durable performances.
基金supported by the National Natural Science Foundation of China(No.52000145)the Youth Innovation Team of Shaanxi Universities,China(No.2019No.19)+1 种基金the Key Scientific Research Projects of Education Department of Shaanxi Province,China(No.22JY035)the Project of Youth Talent Lift Program of Shaanxi Association for Science and Technology,China(No.20230447).
文摘A pilot-scale filtration system was adopted to prepare filter media with catalytic activity to remove manganese(Mn^(2+))and ammonium(NH_(4)^(+)-N).Three different combinations of oxidants(KMnO_(4)and K_(2)FeO_(4))and reductants(MnSO_(4)and FeCl_(2))were used during the start-up period.Filter R3 started up by KMnO_(4)and FeCl_(2)(Mn^(7+)→MnO_(x))exhibited excellent catalytic property,and the NH_(4)^(+)-N and Mn^(2+)removal efficiency reached over 80%on the 10th and 35th days,respectively.Filter R1 started up by K_(2)FeO_(4)and MnSO_(4)(MnO_(x)←Mn^(2+))exhibited the worst catalytic property.Filter R2 started up by KMnO_(4)and MnSO_(4)(Mn^(7+)→MnO_(x)←Mn^(2+))were in between.According to Zeta potential results,the Mn-based oxides(MnO_(x))formed by Mn^(7+)→MnO_(x)performed the highest pHIEP and pHPZC.The higher the pHIEP and pHPZC,the more unfavorable the cation adsorption.However,it was inconsistent with its excellent Mn^(2+)and NH_(4)^(+)-N removal abilities,implying that catalytic oxidation played a key role.Combined with XRD and XPS analysis,the results showed that the MnO_(x)produced by the reduction of KMnO_(4)showed early formation of buserite crystals,high degree of amorphous,high content of Mn3+and lattice oxygen with the higher activity to form defects.The above results showed that MnO_(x)produced by the reduction of KMnO_(4)was more conducive to the formation of active species for catalytic oxidation of NH_(4)^(+)-N and Mn^(2+)removal.This study provides new insights on the formation mechanisms of the active MnO_(x)that could catalytic oxidation of NH_(4)^(+)-N and Mn^(2+).
基金supported by the National Natural Science Foundation of China (52173273)Fundamental Research Funds for the Central Universities (2022CX11013)+2 种基金Shanxi Province Science Foundation for Youths (No.202203021212391)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (No.2022L253)Institute Foundation Project of China Academy of Railway Sciences Corporation Limited Metals and Chemistry Research Institute (No.2023SJ02)。
文摘The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by the sluggish Na^(+)kinetics and the phase transitions upon cycling.Herein,we establish the thermodynamically stable phase diagram of various Mn-based oxide composites precisely controlled by sodium content tailoring strategy coupling with co-doping and solid-state reaction.The chemical environment of the P2/P'3 and P2/P3 biphasic composites indicate that the charge compensation mechanism stems from the cooperative contribution of anions and cations.Benefiting from the no phase transition to scavenge the structure strain,P2/P'3 electrode can deliver long cycling stability(capacity retention of 73.8%after 1000 cycles at 10 C)and outstanding rate properties(the discharge capacity of 84.08 mA h g^(-1)at 20 C)than P2/P3 electrode.Furthermore,the DFT calculation demonstrates that the introducing novel P'3 phase can significantly regulate the Na^(+)reaction dynamics and modify the local electron configuration of Mn.The effective phase engineering can provide a reference for designing other high-performance electrode materials for Na-ion batteries.
基金financially supported by the National Natural Science Foundation of China(52274295)the Natural Science Foundation of Hebei Province(E2025501032,E2025501028)+3 种基金the Fundamental Research Funds for the Central Universities(N2523045,N2423051,N2423005,N2423019)the Science and Technology Project of Hebei Education Department(QN2024238)the Central Guided Local Science and Technology Development Fund Project of Hebei Province(254Z1102G)the Basic Research Program Project of Shijiazhuang City for Universities Stationed in Hebei Province(241790937A)。
文摘The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of these materials is impeded by two main factors:the MnO_(6) structure distortion induced by the Jahn-Teller(J-T)effect of Mn^(3+),and the unfavorable phase transitions that occur during the insertion and extraction of Na^(+).Here,we present a strategy to improve structural stability by incorporating cost-effective,robust Al-O bonds.This approach induces localized adjustments in the electronic structu re and a pinning effect,which limits the deformation of the transition metal(TM)layers,strengthens the electrostatic bonding within the TM layers,and expands the Na layer spacing.Consequently,the Na_(0.67)Fe_(0.4)Mn_(0.54)Al_(0.06)O_(2) cathode demonstrates a capacity of 168.8 mAh g^(-1) at 0.1 C,maintaining89.2%of its original capacity after 200 cycles at 1 C.Through in situ electrochemical impedance spectroscopy(EIS)with dynamic resistance transformation(DRT)analysis,ex situ X-ray absorption spectroscopy(XAS),and in situ X-ray diffraction(XRD),the study demonstrates a reduction in the J-T effect,enhanced kinetic performance,and the inhibition of detrimental phase transitions.This study offers new avenues to the development and design of future low-cost Fe/Mn-based cathodes.
基金supported by the National Key R&D Program of China(No.2022YFB2404400)the National Natural Science Foundation of China(Nos.U23A20577,52372168,92263206 and 21975006)+1 种基金the“The Youth Beijing Scholars program”(No.PXM2021_014204_000023)the Beijing Natural Science Foundation(Nos.2222001 and KM202110005009).
文摘The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.
基金financially supported by the National Natural Science Foundation of China(NSFC)(52274295)the Natural Science Foundation of Hebei Province(E2021501029)+3 种基金the Fundamental Research Funds for the Central Universities(N2423051,N2423053,N2302016,N2423019,N2323013,N2423005)the Science and Technology Project of Hebei Education Department(QN2024238)the Basic Research Program Project of Shijiazhuang City for Universities Stationed in Hebei Province(241790937A)the Science and Technology Project of Qinhuangdao City in 2023.
文摘Mn-based layered oxides(KMO)have emerged as one of the promising low-cost cathodes for potassiumion batteries(PIBs).However,due to the multiple-phase transitions and the distortion in the MnO6structure induced by the Jahn-Teller(JT)effect associated with Mn-ion,the cathode exhibits poor structural stability.Herein,we propose a strategy to enhance structural stability by introducing robust metal-oxygen(M-O)bonds,which can realize the pinning effect to constrain the distortion in the transition metal(TM)layer.Concurrently,all the elements employed have exceptionally high crustal abundance.As a proof of concept,the designed K_(0.5)Mn_(0.9)Mg_(0.025)Ti_(0.025)Al_(0.05)O_(2)cathode exhibited a discharge capacity of approximately 100 mA h g^(-1)at 20 mA g^(-1)with 79%capacity retention over 50 cycles,and 73%capacity retention over 200 cycles at 200 mA g^(-1),showcased much better battery performance than the designed cathode with less robust M-O bonds.The properties of the formed M-O bonds were investigated using theoretical calculations.The enhanced dynamics,mitigated JT effect,and improved structural stability were elucidated through the in-situ X-ray diffractometer(XRD),in-situ electrochemical impedance spectroscopy(EIS)(and distribution of relaxation times(DRT)method),and ex-situ X-ray absorption fine structure(XAFS)tests.This study holds substantial reference value for the future design of costeffective Mn-based layered cathodes for PIBs.
基金National Key Research and Development Program of China,Grant/Award Number:2022YFB2502000National Natural Science Foundation of China,Grant/Award Number:52207244。
文摘In the realm of sodium-ion batteries(SIBs),Mn-based layered oxide cathodes have garnered considerable attention owing to their anionic redox reactions(ARRs).Compared to other types of popular sodium-ion cathodes,Mn-based layered oxide cathodes with ARRs exhibit outstanding specific capacity and energy density,making them promising for SIB applications.However,these cathodes still face some scientific challenges that need to be addressed.This review systematically summarizes the composition,structure,oxygen-redox mechanism,and performance of various types of Mn-based cathodes with ARRs,as well as the main scientific challenges they face,including sluggish ion diffusion,cationic migration,O_(2) release,and element dissolution.Currently,to resolve these challenges,efforts mainly focus on six aspects:synthesis methods,structural design,doped modification,electrolyte design,and surface engineering.Finally,this review provides new insights for future direction,encompassing both fundamental research,such as novel cathode types,interface optimization,and interdisciplinary research,and considerations from an industrialization perspective,including scalability,stability,and safety.
基金Supported by the Natural Science Foundation of Shanxi Province(202203021221303)the Science and Technology Major Project of Shanxi Province(202005D121002)the Science and Technology Cooperation and Communication Project of Shanxi Province(202304041101016)。
文摘Propylene oxide(PO)is an important petrochemical materials used to produce downstream products such as propylene glycol(PG),polyether polyols,and dipropylene glycol(DPG).Among these,DPG is commonly used as a solvent for fragrances,cosmetics,food additives,and detergents,and can also be served as a moisturizer in cosmetics,showing broad application prospects.The distribution of DPG isomers in the products synthesized from PO and PG has a significant impactΔrGΔrHΔfHθΔfGθPO+PG⇌DPG PO+DPG⇌TPG PG+PG⇌DPG+H_(2)O PG+DPG⇌TPG+H_(2)O on the quality of the products.Therefore,conducting thermodynamic calculation on the reaction of PO and PG to synthesize DPG can provide a theoretical basis for practical operations and product distribution regulation.So,in this paper,the thermodynamic parameters of PO,1,2-PG,H_(2)O,tripropylene glycol(TPG)and three isomers of DPG under different reaction conditions is calculated.Additionally,the,and lnK for four potential reactions at various reaction temperatures and pressures are calculated.By designing isodesmic reactions and combining the results of thermodynamic calculations,the and for the isomers of DPG are obtained,and the relative error is less than 7%.The results show that in the process of preparing DPG by PO and PG,when PO∶PG=1,the reaction temperature ranges from 298.15 to 413.15 K,and the pressure ranges from 101.325 to 506.625 kPa,the reactions of and are thermodynamically spontaneous.While the reactions of and are thermodynamically unspontaneous.The optimal reaction temperature and pressure are 413.15 K and 101.325 kPa.The thermodynamic stability of the three isomers is DPG1>DPG2>DPG3 under standard conditions.The accuracy of the computational results is verified through experimental design,and based on this,the factors affecting product distribution are analyzed.
文摘Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.
文摘It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,and FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbents were prepared by coupling fly ash-based Si-Al carriers.The active components Fe-Ce-La oxides and Si-Al carriers were characterized by TPD,TG,XRF,BET and XPS,respectively.The effects of temperature,Si/Al ratio and FeCeLaO loading rate on the sulfur resistance were investigated.Results show that the SO_(2) promotes the arsenic removal of Fe_(2)O_(3),CeLaO and FeCeLaO.At 400℃,the arsenic removal efficiencies of the three oxides increase from 45.3%,72.5% and 81.3% without SO_(2) to 62.6%,80.5%and 91.0%,respectively.The SO_(2) inhibits the arsenic removal of La_(2)O_(2)CO_(3) and FeLaO,and the inhibition effect is pronounced at high temperatures.The sulfur poisoning resistance of Si-Al carriers increases with the increase of Si/Al ratio.When the Si/Al ratio is increased to 9.74,the arsenic removal efficiency in the SO_(2) environment is 13.9% higher than that in the absence of SO_(2).Introducing FeCeLaO active components is beneficial for enhancing the SO_(2) poisoning resistance of Si-Al carriers.The strong sulfur resistance of the FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbent results from multiple factors:protective effects of Ce on Fe,La and Al;sulfation-induced generation of Ce^(3+)and surface-adsorbed oxygen;and strong surface acidity of SiO_(2).
基金supported by the National Natural Science Foundation of China(Grant Nos.U22A20106,52201112,and U22A20173)Fundamental Research Funds for the Central Universities(N25LJ002).
文摘Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosion resistance and the role of the oxide scale in corrosion environments.The corrosion resistance of CF-PHS with and without oxide scale was comprehensively evaluated by analyzing electrochemical processes and corrosion products,as well as characterizing the corroded oxide scale features,while comparing it with commercial 22MnB5 steel.The results indicate that CF-PHS exhibits superior corrosion resistance compared to 22MnB5 steel and the presence of oxide scale may have a negative influence on short-time corrosion resistance.The ultra-thin oxide scale is unable to effectively and timely mitigate pit propagation during the rapid electrochemical tests.Conversely,during the prolonged corrosion process,the oxide scale can still function as the physical barrier to provide protective effects,making the corrosion process develop more slowly and evenly.
基金funded by grants from the National Natural Science Foundation of China(32288101 and 91631306 to B.S32170632 and 32000390 to Y.H.32400503 to Y.G.)Major Scientific Project of Yunnan Province(202305AH340007 to B.S.)+4 种基金Yunnan Revitalization Talent Support Program Science&Technology Champion Project(202005AB160004 to B.S.)Yunnan Revitalization Talent Support Program Innovation Team(202405AS350008)Yunnan Scientist Workshops(to B.S.)the Youth Innovation Promotion Association of CAS(to Y.H.),the Science and Technology General Program of Yunnan Province(202301AW070010 and 202001AT070110 to Y.H.)and the Provincial Key Research,Development,and Translational Program(XZ202101ZY0009G to Baima.).
文摘Nitric oxide(NO)is a key vasodilator that regulates vascular pressure and blood flow.Tibetans have developed a"blunted"mechanism for regulating NO levels at high altitude,with GTP cyclohydrolase 1(GCH1)identified as a key candidate gene.Here,we present comprehensive genetic and functional analyses of GCH1,which exhibits strong Darwinian positive selection in Tibetans.We show that Tibetan-enriched GCH1 variants down-regulate its expression in the blood of Tibetans.Based on this observation,we generate the heterozygous Gch1 knockout(Gch1^(+/-))mouse model to simulate its downregulation in Tibetans.We find that under prolonged hypoxia,the Gch1^(+/-)mice have relatively higher blood NO and blood oxygen saturation levels compared with the wild-type(WT)controls,providing better oxygen supplies to the cardiovascular and pulmonary systems.Markedly,hypoxia-induced cardiac hypertrophy and pulmonary remodeling are significantly attenuated in the Gch1^(^(+/-))mice compared with the WT controls,likely due to the adaptive changes in molecular regulations related to metabolism,inflammation,circadian rhythm,extracellular matrix,and oxidative stress.This study sheds light on the role of GCH1 in regulating blood NO,contributing to the physiological adaptation of the cardiovascular and pulmonary systems in Tibetans at high altitude.
基金financially supported by the National Natural Science Foundation of China(Grant No.12172093)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2021A1515012607)。
文摘High-entropy oxides(HEOs)have emerged as a promising class of memristive materials,characterized by entropy-stabilized crystal structures,multivalent cation coordination,and tunable defect landscapes.These intrinsic features enable forming-free resistive switching,multilevel conductance modulation,and synaptic plasticity,making HEOs attractive for neuromorphic computing.This review outlines recent progress in HEO-based memristors across materials engineering,switching mechanisms,and synaptic emulation.Particular attention is given to vacancy migration,phase transitions,and valence-state dynamics—mechanisms that underlie the switching behaviors observed in both amorphous and crystalline systems.Their relevance to neuromorphic functions such as short-term plasticity and spike-timing-dependent learning is also examined.While encouraging results have been achieved at the device level,challenges remain in conductance precision,variability control,and scalable integration.Addressing these demands a concerted effort across materials design,interface optimization,and task-aware modeling.With such integration,HEO memristors offer a compelling pathway toward energy-efficient and adaptable brain-inspired electronics.
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金supported by Korea Electrotechnology Research Institute(KERI)Primary research program through the National Research Council of Science&Technology(NST)funded by the Ministry of Science and ICT(MSIT)(No.25A01015)by the Technology Innovation Program(20019091)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)by the National Research Council of Science&Technology(NST)grant from the Korea government(MSIT)(No.GTL24012-000).
文摘Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.
基金the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(No.2023C01072)the Institute of Zhejiang University-Quzhou for their financial support。
文摘Poly(phenylene oxide)(PPO)exhibits excellent dielectric properties,making it an ideal substrate for high-frequency,high-speed copper-clad laminates.The phenolic hydroxyl group at the end of PPO plays a key role in its reactivity.Accurately quantifying the phenolic hydroxyl content in PPO is essential but challenging.In this study,we proposed a method for measuring the phenolic hydroxyl content of PPO using differential UV absorption spectroscopy.In alkaline solutions,the phenolic hydroxyl in PPO completely ionizes to form phenoxide ions,leading to a significant increase in UV absorbance at approximately 250 and 300 nm.Notably,the differential UV absorbance at approximately 300 nm was directly proportional to the phenolic hydroxyl concentration.Using 2,6-dimethylphenol as a standard,a calibration curve was established to relate the phenolic hydroxyl concentration to differential UV absorbance at approximately 300 nm,providing a precise and straightforward method for phenolic hydroxyl quantification in PPO with distinct advantages over conventional techniques.
基金Project supported by Natural Science Foundation of Zhejiang Province(LD21E080001)Zhejiang Provincial Ten Thousand Talent Program(ZJWR0302055)。
文摘This study explored the impact of sintering time and temperature on the synthesis and formation of high-entropy rare earth oxides(HEOs).By systematically varying the sintering conditions,a series of Lu_(2)Yb_(2)Tm_(2)Er_(2)O_(12) samples was synthesized and their structural and chemical properties were analyzed using scanning electron microscopy(SEM)with energy-dispersive X-ray spectroscopy(EDS)elemental mapping,X-ray diffraction(XRD),high-resolution transmission electron microscopy(HRTEM),and X-ray photoelectron spectroscopy(XPS).According to XRD patterns,a single-phase cubic C-type structure is easier to form at higher sintering temperatures(1400-1500℃),with sharper peaks signifying better crystallinity.With longer sintering times improving grain development and homogeneity,SEM research reveals a change in morphology from spherical grains at lower temperatures(1100-1200℃)to blocky grains at higher temperatures(1300-1500℃).HRTEM pictures verified the nanoparticles'strong crystallinity,and at higher temperatures,the lattice fringes widen and become more distinct,indicating better atomic ordering and diffusion.Stable and uniform high-entropy oxide production is indicated by the XPS spectra,which shows uniform elemental distribution and consistent chemical states of the constituent elements with very slight variations in the oxygen peaks.The findings highlight how important the sintering temperature is for reaching the intended high-entropy phase,with higher temperatures promoting improved atomic diffusion and compositional homogeneity.The results open the door for the use of high-entropy rare earth oxides in sophisticated functional materials by offering insightful information on how to best synthesize them.
基金financially supported by the International Cooperation Program from the Ministry of Science and Technology of Hubei Province(No.2023EHA069)Shenzhen Science and Technology Program(No.JCYJ20230807143702005)National Foreign Experts Program(No.G2022027015L)。
文摘Magnetic resonance imaging(MRI)is one of the most widely used diagnostic techniques.Iron oxide nanoparticles,as a promising kind of contrast agents,have attracted intense research interest due to their low toxicity and superparamagnetism.However,it is still a great challenge to prepare ideal iron oxide based contrast agents with high uniformity,excellent water solubility and biocompatibility.In this paper,a novel water-soluble polymer ligand pentaerythritol tetrakis 3-mercaptopropionate-poly(N-vinyl-2-pyrrolidone)(PTMP-PVP)was used as a capping reagent to prepare iron oxide nanoparticles MIONs@PTMP-PVP through one-step co-precipitation of iron precursors in aqueous solution at 100℃.The obtained nanoparticles MIONs@PTMP-PVP had a small size and narrow size distribution,and they were found to be biocompatible as determined through CCK-8 assay and histology analysis.In vivo MRI study demonstrated that the obtained MIONs@PTMP-PVP can be potentially used as an effective T_(2)-weighted MRI contrast agent.
基金Funded by the Key Scientific and Technological Project of Zhejiang Provincial Administration for Market Regulation(No.ZD2024004)the National Natural Science Foundation of China(Nos.62304214 and 62304213)+2 种基金the Natural Science Foundation of Zhejiang Province(No.LQ23E020006)the Chunhui Project Foun-dation of the Education Department of China(No.HZKY20220198)the Fundamental Research Funds for the Provincial Universities of Zhejiang(Nos.2021YW35,2021YW36 and 2022YW62)。
文摘We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.
