To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
The effects of artificial aging(T6)on the creep resistance with tensile stresses in the range of 50−80 MPa at 175℃were investigated for an extruded Mg−1.22Al−0.31Ca−0.44Mn(wt.%)alloy.The Guinier-Preston(G.P.)zones pr...The effects of artificial aging(T6)on the creep resistance with tensile stresses in the range of 50−80 MPa at 175℃were investigated for an extruded Mg−1.22Al−0.31Ca−0.44Mn(wt.%)alloy.The Guinier-Preston(G.P.)zones primarily precipitate in the sample aged at 200℃for 1 h(T6-200℃/1h),while the Al_(2)Ca phases mainly precipitate in the sample aged at 275℃for 8 h(T6-275℃/8h).The T6-200℃/1h sample exhibits excellent creep resistance,with a steady-state creep rate one order of magnitude lower than that of the T6-275℃/8h sample.The abnormally high stress exponent(~8.2)observed in the T6-200℃/1h sample is associated with the power-law breakdown mechanism.TEM analysis illuminates that the creep mechanism for the T6-200℃/1h sample is cross-slip between basal and prismatic dislocations,while the T6-275℃/8h sample exhibits a mixed mechanism of dislocation cross-slip and climb.Compared with the Al_(2)Ca phase,the dense G.P.zones effectively impede dislocation climb and glide during the creep process,demonstrating superior creep resistance of the T6-200℃/1h sample.展开更多
The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 M...The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 MPa and an elastic modulus of 145.8 GPa.After aging for 240 min at 500℃,the elastic modulus of the alloy reached 149.5 GPa,which was among the highest values reported for Cu alloys.It was worth mentioning that the tensile strength increased rapidly from 740 to 934 MPa after aging for 5 min at 500℃,which was close to the maximum tensile strength(978 MPa).Analysis of the underlying strengthening mechanisms and phase transformation behavior revealed that the Cu−19Ni−6Cr−7Mn alloy underwent spinodal decomposition and DO_(22) ordering during the first 5 min of aging at 500℃,and L1_(2) ordered phases and bcc-Cr precipitates appeared.Therefore,the enhanced mechanical properties of the Cu−19Ni−6Cr−7Mn alloy can be attributed to the stress field generated by spinodal decomposition and the presence of nanoscale ordered phase and Cr precipitates.展开更多
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金supported by the National Natural Science Foundation of China (Nos. 52175322, 52271031)the Natural Science Foundation of Jilin Province, China (No. SKL202302015)。
文摘The effects of artificial aging(T6)on the creep resistance with tensile stresses in the range of 50−80 MPa at 175℃were investigated for an extruded Mg−1.22Al−0.31Ca−0.44Mn(wt.%)alloy.The Guinier-Preston(G.P.)zones primarily precipitate in the sample aged at 200℃for 1 h(T6-200℃/1h),while the Al_(2)Ca phases mainly precipitate in the sample aged at 275℃for 8 h(T6-275℃/8h).The T6-200℃/1h sample exhibits excellent creep resistance,with a steady-state creep rate one order of magnitude lower than that of the T6-275℃/8h sample.The abnormally high stress exponent(~8.2)observed in the T6-200℃/1h sample is associated with the power-law breakdown mechanism.TEM analysis illuminates that the creep mechanism for the T6-200℃/1h sample is cross-slip between basal and prismatic dislocations,while the T6-275℃/8h sample exhibits a mixed mechanism of dislocation cross-slip and climb.Compared with the Al_(2)Ca phase,the dense G.P.zones effectively impede dislocation climb and glide during the creep process,demonstrating superior creep resistance of the T6-200℃/1h sample.
基金supported by the National Key R&D Program of China (No. 2021YFB3700700)the Henan Province Top Talent Training Program Project, China (No. 244500510020)the High-level Talent Research Start-up Project Funding of Henan Academy of Sciences, China (No. 242017001)。
文摘The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 MPa and an elastic modulus of 145.8 GPa.After aging for 240 min at 500℃,the elastic modulus of the alloy reached 149.5 GPa,which was among the highest values reported for Cu alloys.It was worth mentioning that the tensile strength increased rapidly from 740 to 934 MPa after aging for 5 min at 500℃,which was close to the maximum tensile strength(978 MPa).Analysis of the underlying strengthening mechanisms and phase transformation behavior revealed that the Cu−19Ni−6Cr−7Mn alloy underwent spinodal decomposition and DO_(22) ordering during the first 5 min of aging at 500℃,and L1_(2) ordered phases and bcc-Cr precipitates appeared.Therefore,the enhanced mechanical properties of the Cu−19Ni−6Cr−7Mn alloy can be attributed to the stress field generated by spinodal decomposition and the presence of nanoscale ordered phase and Cr precipitates.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
