Coupled dissolution-precipitation is one of the critical processes influencing the mineralogical and geochemical evolution of pegmatites.This mechanism involves the simultaneous dissolution of primary mineral phases a...Coupled dissolution-precipitation is one of the critical processes influencing the mineralogical and geochemical evolution of pegmatites.This mechanism involves the simultaneous dissolution of primary mineral phases and the precipitation of secondary phases,driven by changes in the chemical environment,often mediated by hydrothermal fluids.The Bailongshan Li deposit,located in the West Kunlun region of northwest China,is a significant geological formation known for its rich lithium content and associated rare metals such as tantalum,niobium,and tin.This study investigates the coupled dissolution-precipitation processes that have played a crucial role in the mineralization of this deposit,focusing on key minerals,including cassiterite(Cst),columbite-group minerals(CGM),and elbaite(Elb).Using a combination of petrographic analysis,back-scattered electron(BSE)imaging,cathodoluminescence(CL)imaging,and micro X-ray fluorescence(XRF)mapping,we examined the textural and chemical characteristics of these minerals.Our findings reveal intricate patchy zoning patterns and element distributions(indicated by the Nb,Ta,W,Mn,Fe,Hf,Ti for CGM;Hf,Ti Rb,W,Nb,Ta for Cst;Ti,Zn,Fe,W,Hf,Mn,K for Elb)that indicate multiple stages of mineral alteration driven by fluid-mediated processes.The coupled dissolution-precipitation mechanisms observed in the Bailongshan deposit have resulted in significant redistribution and enrichment of economically valuable elements.The study highlights the importance of hydrothermal fluids in altering primary mineral phases and precipitating secondary phases with distinct compositions.These processes not only modified the mineralogical makeup of the pegmatite but also enhanced its economic potential by concentrating rare metals.Signatures of coupled dissolutionprecipitation processes can serve as an essential tool for mineral exploration,guiding the search for high-grade zones within similar pegmatitic formations.展开更多
Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geo...Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geological,technical,environmental and tectonic parameters.A multi-criteria decision making method is necessary to rank the alternatives.In this paper we describe how plant location is selected by using the Analytic Hierarchy Process(AHP).This method,with eight criteria,was used to select a location for the mineral processing plant at the Sangan iron ore mine(phase 1).Three alternatives for the processing plant were evaluated.The main criteria were distance from the mine,access to heavy machinery transport,the amount of excavation required for grading,bed mixture capacity,belt conveyor length,distance from the tailing dam,distance from the waste dumps and surface water diversion requirements.Finally,the alternatives were ranked and the best location was proposed.展开更多
More than 40 kinds of selected minerals and compounds were individually irradiated by microwaves under an inert atmosphere,and the temperatures of samples were measured with a metal-sheathed thermocouple inserted into...More than 40 kinds of selected minerals and compounds were individually irradiated by microwaves under an inert atmosphere,and the temperatures of samples were measured with a metal-sheathed thermocouple inserted into the samples directiy.The results indicated that most sulphide and some oxide minerals and compounds could be heated to high temperatures in a short timet whereas the common gangue minerals,some oxide and oxy-salt minerals or compounds could not.The sulphide minerals had faster heating rate than the oxide minerals containing the same cations.The impurities of minerals had significant effect on the heating rate.The selective heating characteristics of microwaves on different minerals and compounds could be attributed to the differences between their conductivities or dielectric loss factors and bonding properties.展开更多
The latest progress in mineral processing in China is described. It is also pointed out that the existing technology can not meet the needs of economic development. The combined challenges of poor resources, economica...The latest progress in mineral processing in China is described. It is also pointed out that the existing technology can not meet the needs of economic development. The combined challenges of poor resources, economical benefits and environmental pollution issues require further research to upgrade the separation efficiency economically. The methods of mineral processing should play a more important part in waste treatment such as wastewater treatment, the remediation of contaminated soil and the recycling of wastes. Biomineral technology will be utilised in the near future.展开更多
Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and ...Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and economic data is available to evaluate methods. In addition, selecting the right approach for alunite beneficiation, requires introducing a wide range of criteria and careful analysis of alternatives.In this research, after studying the existing processes, 13 methods were considered and evaluated by 14 technical, economic and environmental analyzing criteria. Due to multiplicity of processing methods and attributes, in this paper, Multi Attribute Decision Making methods were employed to examine the appropriateness of choices. The Delphi Analytical Hierarchy Process(DAHP) was used for weighting selection criteria and Fuzzy TOPSIS approach was used to determine the most profitable candidates. Among 13 studied methods, Spanish, Svoronos and Hazan methods were respectively recognized to be the best choices.展开更多
In order to identify the mixing and segregation behaviors in a mineral processing operation, present study aimed on the hydrodynamics of solid–liquid fluidization. The study was carried out in a fluidization column w...In order to identify the mixing and segregation behaviors in a mineral processing operation, present study aimed on the hydrodynamics of solid–liquid fluidization. The study was carried out in a fluidization column with tapings at different height of the bed to collect the sample. The binary particles considered in this study are hematite(4800 kg/m3) and quartz(2600 kg/m3) at different size fractions in the range of average size 87×10^(-6)m to 400×10^(-6)m. It is observed that for various binary mixtures, both quartz and hematite particles share the equal composition by mass(50%) at a particular height of fluidized bed, referred as ‘‘locus point'' of mixing. Study indicates that the mixing zone volume will increase for a continuous fluidized bed plant operation. It is observed that the number of locus points varies from 1 to 3 signifying their dependency on the size ratios of binary mixture. Whenever, the difference in terminal velocity between quartz and hematite particles approaches to zero, mixing is enhanced.Further, the present study is extended to find the segregation index for the different size ratios of quartz and hematite particles. It is evident that depending on the size ratios, various regions such as complete segregation, partial mixing and complete mixing can be observed.展开更多
The first International Conference on Modern Process Mineralogy and Mineral Processing, organized by the Nonferrous Metals Society of China and hosted by Beijing General Research Institute of Mining and Metallurgy,was...The first International Conference on Modern Process Mineralogy and Mineral Processing, organized by the Nonferrous Metals Society of China and hosted by Beijing General Research Institute of Mining and Metallurgy,was held on September 22-25,1992,in Beijing,China.About 350 scholars and experts from 25 countries and regions showed up at the conference and 130 papers were presented,among them 98 papers are of mineral processing.Some of the papers given in mineral processing are summed up as follows.展开更多
In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,in...In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,including insufficient time for practice,low management level,inadequate implementation of the double-supervisor system,and poor results of professional practice,has reduced the effectiveness of professional practice.In view of the aforementioned problems and the characteristics of the discipline,this paper proposes several strategies for improving the effectiveness of professional practice for postgraduates in mineral processing engineering.展开更多
Electrochemical technology was introduced to study the floatability of galena in some wastewater samples from different processes of mineral processing plant in Fankou Lead-Zinc Mine. It is shown that the residual col...Electrochemical technology was introduced to study the floatability of galena in some wastewater samples from different processes of mineral processing plant in Fankou Lead-Zinc Mine. It is shown that the residual collector molecules in the wastewater from the thickening of lead and zinc concentrates can benefit the formation of lead xanthanate onto the surface of galena, yet, some special chemical components in the wastewater from zinc tailings and effluent may induce some surface reactions on galena, and herewith the direct reuse of this water may bring disadvantageous influence on galena flotation.展开更多
White sandstone samples from Hanout area of Late Cambrian-Early Ordovician sandstone in south of Jordan were studied and assessed as a source of glass sand. Upgrading the sand included removing or reducing the content...White sandstone samples from Hanout area of Late Cambrian-Early Ordovician sandstone in south of Jordan were studied and assessed as a source of glass sand. Upgrading the sand included removing or reducing the content of the contaminant oxides and the heavy minerals. The aim of this research was to achieve this upgrading by examining the best-suited and cost-effective processing method(s) with sufficient product recovery. Following the initial sample characterisation at “bench scale”, a pilot study was performed. A high-grade Glass Sand product of 500 - 125 μm size fraction was produced by wet screening, attrition scrubbing and the separation of heavy minerals using spirals. The high quality Glass Sand product compared well with Grade-A of the British Standard for glass sand. Due to the relatively low level of impurities in the raw material, a substantial silica sand recovery was produced with a high silica grade. The silica sand product was capable to be used in the high quality glass industry and in many other applications where pure silica is required. The mass flowrate of the feeds and the products in the spiral was calculated for the bulk sample as well as the amount of water required operating the process.展开更多
Social economic growth and the increasing demand for mineral resources have promoted the development of metallic mineral processing technology.Therefore,in order to satisfy the demands for development in mining,cultiv...Social economic growth and the increasing demand for mineral resources have promoted the development of metallic mineral processing technology.Therefore,in order to satisfy the demands for development in mining,cultivating comprehensive mineral processing engineering professionals with strong innovative practical skills has become the top priority in current education.We have established a new course,“Metallic Mineral Processing,”for students majoring in mineral processing engineering in universities,with coal and other sources of energy as the main focus.This paper analyzes the purpose and significance of setting up this course and the exploration of the reform of the teaching mode,with the aim of improving the teaching quality and ensuring the cultivation of mineral processing engineering undergraduates.展开更多
The strong acid and high alkali of mineral processing wastewater, as well as a large number of suspended solids, heavy metal ions and the residue of various flotation reagents in mineral processing wastewater are the ...The strong acid and high alkali of mineral processing wastewater, as well as a large number of suspended solids, heavy metal ions and the residue of various flotation reagents in mineral processing wastewater are the important influencing factors for the formation of mine pollution. In order to better promote the treatment effect of mineral processing wastewater and the development of recycling technology, this paper mainly introduces the source of mineral processing wastewater, water quality characteristics and harm, summarizes the natural purification, acid-base neutralization, coagulating sedimentation and other basic wastewater treatment technology, the source of mineral processing wastewater. The basic characteristics and hazards are briefly summarized, and the treatment of mineral processing wastewater is deeply studied. It is hoped to provide reference value for the effective development of the treatment of mineral processing wastewater in the future.展开更多
Mineral processing is a method to treat raw ore by gravity separation, magnetic separation and flotation to obtain qualified grade concentrate. In different stages of mineral processing, it is usually necessary to add...Mineral processing is a method to treat raw ore by gravity separation, magnetic separation and flotation to obtain qualified grade concentrate. In different stages of mineral processing, it is usually necessary to add a variety of reagents to realize the rapid separation of minerals and improve the separation concentration. Therefore, the rational use of chemicals directly determines the efficiency and economy of mineral separation. At present, there are many kinds of chemicals used in mineral separation, which are quite different from each other. Once used incorrectly, it will lead to serious accidents. Therefore, it is necessary to analyze the types and mechanisms of chemicals commonly used in different stages of mineral processing, which can help relevant personnel to quickly understand the types and usage of chemicals, and has great guiding significance for improving the efficiency and economy of mineral processing.展开更多
Mining and mineral processing have major environmental impacts that must be assessed and mitigated.A fundamental tool in this context is life-cycle assessment(LCA),a methodology designed to quantify the environmental ...Mining and mineral processing have major environmental impacts that must be assessed and mitigated.A fundamental tool in this context is life-cycle assessment(LCA),a methodology designed to quantify the environmental impacts associated with products,services,or processes.This article presents a bibliometric analysis of LCA research in the mining industry to provide an overview of the development of this field.The methodology consisted of three steps:(1)searching for publications on the Web of Science,(2)screening documents,and(3)conducting data analyses using the Bibliometrix software package.Consequently,63 papers published between 2000 and 2024 were identified,including original articles,review articles,conference proceedings,and book chapters.The Commonwealth Scientific and Industrial Research Organisation and Australia are the institution and country with the most publications,and Minerals Engineering is the most prominent journal in this field.It was also found that LCA has been applied to diverse mining-metallurgical processes,extraction of various metals and minerals,consumption of natural resources,evaluation of machinery and fuels,and waste management.The application of LCA in mining is still limited owing to the lack of uniformity in methodology and the paucity of data for the mining-metallurgical sector;therefore,these obstacles must be addressed in future research.展开更多
Ionic liquids as green solvents have shown important application in the extraction and separation of nonferrous metals.The new application perspective,the important fundamental and the applied studies of the extractio...Ionic liquids as green solvents have shown important application in the extraction and separation of nonferrous metals.The new application perspective,the important fundamental and the applied studies of the extraction and separation of nonferrous metals in ionic liquids,including the dissolution and corrosion of metal and metal oxide,hydrometallurgy of chalcopyrite and metallic oxidized ore,and extraction and separation of metal ions,are introduced.展开更多
A better understanding of solid-liquid separation would assist in improving the thickening performance and perhaps water recovery as well. The present work aimed to develop an empirical model to study the effects of o...A better understanding of solid-liquid separation would assist in improving the thickening performance and perhaps water recovery as well. The present work aimed to develop an empirical model to study the effects of ore properties on the thickening process based on pilot tests using a column. A hydro-cyclone was used to prepare the required samples for the experiments. The model significantly predicted the experimental underflow solid content using a regression equation at a given solid flux and bed level for different samples, indicating that ore properties are the effective parameters in the thickening process. This work confirned that the water recovery would be increased about 5% by separating the feed into two parts, overflow and underflow, and introducing two different thickeners into them separately. This is duo to the fact that thickeners are limited by permeability and compressibility in operating conditions.展开更多
Spatially superimposed multiple processes such as multiplicative cascade processes often generate multifractal measures possessing so-called self-similarity or self-affinity that can be described by power- law type of...Spatially superimposed multiple processes such as multiplicative cascade processes often generate multifractal measures possessing so-called self-similarity or self-affinity that can be described by power- law type of functions within certain scale ranges The multifractalities can be estimated by applying multifractal modeling to the measures reflecting the characteristics of the physical processes such as the element concentration values analyzed in rock and soil samples and caused by the underlying mineralization processes and the other geological processes. The local and regional geological processes may result in geochemical patterns with distinct multifractalities as wall as variable scaling ranges. Separation of these multifractal measures on the basis of both the distinct multifractalities and the scaling ranges will be significant for both theoretical studies of multifractal modeling and its applications. Multifractal scaling breaks have been observed from various multifractal patterns. This paper introduces a technique for separating multifractal measures on the basis of scaling breaks. It has been demonstrated that the method is effective for decomposing geochemical and geophysical anomalies required for mineral exploration. A dataset containing the element concentration values of potassium and phosphorus in soil samples was employed for demonstrating the application of the method for studying the fertilizer and yield optimization in agriculture展开更多
The relationship of time to minerals composition in sinters is investigated by mineragraphy are claritied observation and component analysis, and the effects of temperature and atmosphere on mineralization process. Re...The relationship of time to minerals composition in sinters is investigated by mineragraphy are claritied observation and component analysis, and the effects of temperature and atmosphere on mineralization process. Results are obtained as follows. The initial melt forms below the eutectic temperature of CaO·Fe2O3 and CaO·2Fe2O3, which is complex substance containing Ca, Fe, Si and Al, rather than the binary calcium ferrite melt. Minerals composition of binding phase is related to local content of silica in melt, which is influenced by temperature. Appearance of the melt promotes the transition from hematite to magnetite, which then alters the mechanism of calcium ferrite formation. Before the formation of magnetite, the contents of Fe and Ca within the multiple calcium ferrite decrease with temperature, but in the case of magnetite presence, the content of Fe increases solely with increase of temperature and decrease of oxygen potential. Temperature and atmosphere determine minerals composition together, and bring influence on sintering process in different ways. It can be deduced that temperature affects kinetics of the mineralization process, but atmosphere just plays a role in thermodynamics.展开更多
Rare metal ore reserves are an important strategic resource, and their metallogenic mechanism and mineralization studies have also been received widespread international attention.
基金jointly supported by the National Natural Science Foundation of China(Nos.42250202,92162323,42272075)the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.24lgqb001)+1 种基金the Natural Science Foundation Project of Guangdong Province(No.2022A1515010003)the Guangdong Province Introduced Innovative R&D Team of Big Data—Mathematical Earth Sciences and Extreme Geological Events Team(No.2021ZT09H399)。
文摘Coupled dissolution-precipitation is one of the critical processes influencing the mineralogical and geochemical evolution of pegmatites.This mechanism involves the simultaneous dissolution of primary mineral phases and the precipitation of secondary phases,driven by changes in the chemical environment,often mediated by hydrothermal fluids.The Bailongshan Li deposit,located in the West Kunlun region of northwest China,is a significant geological formation known for its rich lithium content and associated rare metals such as tantalum,niobium,and tin.This study investigates the coupled dissolution-precipitation processes that have played a crucial role in the mineralization of this deposit,focusing on key minerals,including cassiterite(Cst),columbite-group minerals(CGM),and elbaite(Elb).Using a combination of petrographic analysis,back-scattered electron(BSE)imaging,cathodoluminescence(CL)imaging,and micro X-ray fluorescence(XRF)mapping,we examined the textural and chemical characteristics of these minerals.Our findings reveal intricate patchy zoning patterns and element distributions(indicated by the Nb,Ta,W,Mn,Fe,Hf,Ti for CGM;Hf,Ti Rb,W,Nb,Ta for Cst;Ti,Zn,Fe,W,Hf,Mn,K for Elb)that indicate multiple stages of mineral alteration driven by fluid-mediated processes.The coupled dissolution-precipitation mechanisms observed in the Bailongshan deposit have resulted in significant redistribution and enrichment of economically valuable elements.The study highlights the importance of hydrothermal fluids in altering primary mineral phases and precipitating secondary phases with distinct compositions.These processes not only modified the mineralogical makeup of the pegmatite but also enhanced its economic potential by concentrating rare metals.Signatures of coupled dissolutionprecipitation processes can serve as an essential tool for mineral exploration,guiding the search for high-grade zones within similar pegmatitic formations.
文摘Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geological,technical,environmental and tectonic parameters.A multi-criteria decision making method is necessary to rank the alternatives.In this paper we describe how plant location is selected by using the Analytic Hierarchy Process(AHP).This method,with eight criteria,was used to select a location for the mineral processing plant at the Sangan iron ore mine(phase 1).Three alternatives for the processing plant were evaluated.The main criteria were distance from the mine,access to heavy machinery transport,the amount of excavation required for grading,bed mixture capacity,belt conveyor length,distance from the tailing dam,distance from the waste dumps and surface water diversion requirements.Finally,the alternatives were ranked and the best location was proposed.
基金Supported by the National Natural Science Foundation and National Nonferrous Metals Industry Corporation of China。
文摘More than 40 kinds of selected minerals and compounds were individually irradiated by microwaves under an inert atmosphere,and the temperatures of samples were measured with a metal-sheathed thermocouple inserted into the samples directiy.The results indicated that most sulphide and some oxide minerals and compounds could be heated to high temperatures in a short timet whereas the common gangue minerals,some oxide and oxy-salt minerals or compounds could not.The sulphide minerals had faster heating rate than the oxide minerals containing the same cations.The impurities of minerals had significant effect on the heating rate.The selective heating characteristics of microwaves on different minerals and compounds could be attributed to the differences between their conductivities or dielectric loss factors and bonding properties.
文摘The latest progress in mineral processing in China is described. It is also pointed out that the existing technology can not meet the needs of economic development. The combined challenges of poor resources, economical benefits and environmental pollution issues require further research to upgrade the separation efficiency economically. The methods of mineral processing should play a more important part in waste treatment such as wastewater treatment, the remediation of contaminated soil and the recycling of wastes. Biomineral technology will be utilised in the near future.
文摘Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and economic data is available to evaluate methods. In addition, selecting the right approach for alunite beneficiation, requires introducing a wide range of criteria and careful analysis of alternatives.In this research, after studying the existing processes, 13 methods were considered and evaluated by 14 technical, economic and environmental analyzing criteria. Due to multiplicity of processing methods and attributes, in this paper, Multi Attribute Decision Making methods were employed to examine the appropriateness of choices. The Delphi Analytical Hierarchy Process(DAHP) was used for weighting selection criteria and Fuzzy TOPSIS approach was used to determine the most profitable candidates. Among 13 studied methods, Spanish, Svoronos and Hazan methods were respectively recognized to be the best choices.
文摘In order to identify the mixing and segregation behaviors in a mineral processing operation, present study aimed on the hydrodynamics of solid–liquid fluidization. The study was carried out in a fluidization column with tapings at different height of the bed to collect the sample. The binary particles considered in this study are hematite(4800 kg/m3) and quartz(2600 kg/m3) at different size fractions in the range of average size 87×10^(-6)m to 400×10^(-6)m. It is observed that for various binary mixtures, both quartz and hematite particles share the equal composition by mass(50%) at a particular height of fluidized bed, referred as ‘‘locus point'' of mixing. Study indicates that the mixing zone volume will increase for a continuous fluidized bed plant operation. It is observed that the number of locus points varies from 1 to 3 signifying their dependency on the size ratios of binary mixture. Whenever, the difference in terminal velocity between quartz and hematite particles approaches to zero, mixing is enhanced.Further, the present study is extended to find the segregation index for the different size ratios of quartz and hematite particles. It is evident that depending on the size ratios, various regions such as complete segregation, partial mixing and complete mixing can be observed.
文摘The first International Conference on Modern Process Mineralogy and Mineral Processing, organized by the Nonferrous Metals Society of China and hosted by Beijing General Research Institute of Mining and Metallurgy,was held on September 22-25,1992,in Beijing,China.About 350 scholars and experts from 25 countries and regions showed up at the conference and 130 papers were presented,among them 98 papers are of mineral processing.Some of the papers given in mineral processing are summed up as follows.
基金This work was supported by The Graduate Education and Teaching Reform Project of CUMTB(YJG202200301)The Yueqi Outstanding Scholar Award of CUMTB and Science and Technology Major Project of Ordos City-Iconic Innovation Team(202204).
文摘In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,including insufficient time for practice,low management level,inadequate implementation of the double-supervisor system,and poor results of professional practice,has reduced the effectiveness of professional practice.In view of the aforementioned problems and the characteristics of the discipline,this paper proposes several strategies for improving the effectiveness of professional practice for postgraduates in mineral processing engineering.
文摘Electrochemical technology was introduced to study the floatability of galena in some wastewater samples from different processes of mineral processing plant in Fankou Lead-Zinc Mine. It is shown that the residual collector molecules in the wastewater from the thickening of lead and zinc concentrates can benefit the formation of lead xanthanate onto the surface of galena, yet, some special chemical components in the wastewater from zinc tailings and effluent may induce some surface reactions on galena, and herewith the direct reuse of this water may bring disadvantageous influence on galena flotation.
文摘White sandstone samples from Hanout area of Late Cambrian-Early Ordovician sandstone in south of Jordan were studied and assessed as a source of glass sand. Upgrading the sand included removing or reducing the content of the contaminant oxides and the heavy minerals. The aim of this research was to achieve this upgrading by examining the best-suited and cost-effective processing method(s) with sufficient product recovery. Following the initial sample characterisation at “bench scale”, a pilot study was performed. A high-grade Glass Sand product of 500 - 125 μm size fraction was produced by wet screening, attrition scrubbing and the separation of heavy minerals using spirals. The high quality Glass Sand product compared well with Grade-A of the British Standard for glass sand. Due to the relatively low level of impurities in the raw material, a substantial silica sand recovery was produced with a high silica grade. The silica sand product was capable to be used in the high quality glass industry and in many other applications where pure silica is required. The mass flowrate of the feeds and the products in the spiral was calculated for the bulk sample as well as the amount of water required operating the process.
基金This study was financially supported by the Undergraduate Education and Teaching Research and Reform Project of CUMTB(J20ZD08,202112)the Yueqi Outstanding Scholar Award of CUMTB.
文摘Social economic growth and the increasing demand for mineral resources have promoted the development of metallic mineral processing technology.Therefore,in order to satisfy the demands for development in mining,cultivating comprehensive mineral processing engineering professionals with strong innovative practical skills has become the top priority in current education.We have established a new course,“Metallic Mineral Processing,”for students majoring in mineral processing engineering in universities,with coal and other sources of energy as the main focus.This paper analyzes the purpose and significance of setting up this course and the exploration of the reform of the teaching mode,with the aim of improving the teaching quality and ensuring the cultivation of mineral processing engineering undergraduates.
文摘The strong acid and high alkali of mineral processing wastewater, as well as a large number of suspended solids, heavy metal ions and the residue of various flotation reagents in mineral processing wastewater are the important influencing factors for the formation of mine pollution. In order to better promote the treatment effect of mineral processing wastewater and the development of recycling technology, this paper mainly introduces the source of mineral processing wastewater, water quality characteristics and harm, summarizes the natural purification, acid-base neutralization, coagulating sedimentation and other basic wastewater treatment technology, the source of mineral processing wastewater. The basic characteristics and hazards are briefly summarized, and the treatment of mineral processing wastewater is deeply studied. It is hoped to provide reference value for the effective development of the treatment of mineral processing wastewater in the future.
文摘Mineral processing is a method to treat raw ore by gravity separation, magnetic separation and flotation to obtain qualified grade concentrate. In different stages of mineral processing, it is usually necessary to add a variety of reagents to realize the rapid separation of minerals and improve the separation concentration. Therefore, the rational use of chemicals directly determines the efficiency and economy of mineral separation. At present, there are many kinds of chemicals used in mineral separation, which are quite different from each other. Once used incorrectly, it will lead to serious accidents. Therefore, it is necessary to analyze the types and mechanisms of chemicals commonly used in different stages of mineral processing, which can help relevant personnel to quickly understand the types and usage of chemicals, and has great guiding significance for improving the efficiency and economy of mineral processing.
文摘Mining and mineral processing have major environmental impacts that must be assessed and mitigated.A fundamental tool in this context is life-cycle assessment(LCA),a methodology designed to quantify the environmental impacts associated with products,services,or processes.This article presents a bibliometric analysis of LCA research in the mining industry to provide an overview of the development of this field.The methodology consisted of three steps:(1)searching for publications on the Web of Science,(2)screening documents,and(3)conducting data analyses using the Bibliometrix software package.Consequently,63 papers published between 2000 and 2024 were identified,including original articles,review articles,conference proceedings,and book chapters.The Commonwealth Scientific and Industrial Research Organisation and Australia are the institution and country with the most publications,and Minerals Engineering is the most prominent journal in this field.It was also found that LCA has been applied to diverse mining-metallurgical processes,extraction of various metals and minerals,consumption of natural resources,evaluation of machinery and fuels,and waste management.The application of LCA in mining is still limited owing to the lack of uniformity in methodology and the paucity of data for the mining-metallurgical sector;therefore,these obstacles must be addressed in future research.
基金Project(50904031) supported by the National Natural Science Foundation of ChinaProject(2008E0049M) supported by the Natural Science Foundation of Yunnan Province,China+1 种基金Project(07Z40082) supported by the Science Foundation of the Education Department of Yunnan Province,ChinaProject(2007-16) supported by the Science Foundation of Kunming University of Science and Technology,China
文摘Ionic liquids as green solvents have shown important application in the extraction and separation of nonferrous metals.The new application perspective,the important fundamental and the applied studies of the extraction and separation of nonferrous metals in ionic liquids,including the dissolution and corrosion of metal and metal oxide,hydrometallurgy of chalcopyrite and metallic oxidized ore,and extraction and separation of metal ions,are introduced.
文摘A better understanding of solid-liquid separation would assist in improving the thickening performance and perhaps water recovery as well. The present work aimed to develop an empirical model to study the effects of ore properties on the thickening process based on pilot tests using a column. A hydro-cyclone was used to prepare the required samples for the experiments. The model significantly predicted the experimental underflow solid content using a regression equation at a given solid flux and bed level for different samples, indicating that ore properties are the effective parameters in the thickening process. This work confirned that the water recovery would be increased about 5% by separating the feed into two parts, overflow and underflow, and introducing two different thickeners into them separately. This is duo to the fact that thickeners are limited by permeability and compressibility in operating conditions.
文摘Spatially superimposed multiple processes such as multiplicative cascade processes often generate multifractal measures possessing so-called self-similarity or self-affinity that can be described by power- law type of functions within certain scale ranges The multifractalities can be estimated by applying multifractal modeling to the measures reflecting the characteristics of the physical processes such as the element concentration values analyzed in rock and soil samples and caused by the underlying mineralization processes and the other geological processes. The local and regional geological processes may result in geochemical patterns with distinct multifractalities as wall as variable scaling ranges. Separation of these multifractal measures on the basis of both the distinct multifractalities and the scaling ranges will be significant for both theoretical studies of multifractal modeling and its applications. Multifractal scaling breaks have been observed from various multifractal patterns. This paper introduces a technique for separating multifractal measures on the basis of scaling breaks. It has been demonstrated that the method is effective for decomposing geochemical and geophysical anomalies required for mineral exploration. A dataset containing the element concentration values of potassium and phosphorus in soil samples was employed for demonstrating the application of the method for studying the fertilizer and yield optimization in agriculture
基金Item Sponsored by National Natural Science Foundation of China (50974012)National High Technology Research and Development Program of China (2006AA06Z125)
文摘The relationship of time to minerals composition in sinters is investigated by mineragraphy are claritied observation and component analysis, and the effects of temperature and atmosphere on mineralization process. Results are obtained as follows. The initial melt forms below the eutectic temperature of CaO·Fe2O3 and CaO·2Fe2O3, which is complex substance containing Ca, Fe, Si and Al, rather than the binary calcium ferrite melt. Minerals composition of binding phase is related to local content of silica in melt, which is influenced by temperature. Appearance of the melt promotes the transition from hematite to magnetite, which then alters the mechanism of calcium ferrite formation. Before the formation of magnetite, the contents of Fe and Ca within the multiple calcium ferrite decrease with temperature, but in the case of magnetite presence, the content of Fe increases solely with increase of temperature and decrease of oxygen potential. Temperature and atmosphere determine minerals composition together, and bring influence on sintering process in different ways. It can be deduced that temperature affects kinetics of the mineralization process, but atmosphere just plays a role in thermodynamics.
基金financially supported by the National Natural Science Foundation of China(grant No.41302061)
文摘Rare metal ore reserves are an important strategic resource, and their metallogenic mechanism and mineralization studies have also been received widespread international attention.
