Plasma polymerized maleic anhydride （MA） was carried out by using maleic anhydride supersaturated ethanol solution as a precursor in a dielectric barrier discharge （DBD）. The film properties were characterized by ...Plasma polymerized maleic anhydride （MA） was carried out by using maleic anhydride supersaturated ethanol solution as a precursor in a dielectric barrier discharge （DBD）. The film properties were characterized by water contact angle （WCA）, Fourier transfer infrared （FTIR）, X-ray photoelectron spectroscopy （XPS）, atomic force microscope （AFM） analysis, and a thickness profilometer. The influence of the processing parameters on the film properties such as tile power frequency and polymerization zone was investigated. The results show that anhydride group incorporated into the growing films is favorable at the frequency of 80 kHz and working pressure of 50 Pa. The poly （maleic anhydride） film is uniform and compact at an average deposition rate of 8 nm/min.展开更多
Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the...Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.展开更多
The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and...The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and tensile properties are investigated.The results show that the microstructures of ZK60 magnesium alloy are refined and distribution uniformity of precipitations is observed after applying the middle frequency electromagnetic field.And the tensile properties of the billets produced by middle frequency electromagnetic field are increased.展开更多
The frequency in middle of magnon energy band in a five-layer ferromagnetic superlattice is studied by using the linear spin-wave approach and Green＇s function technique. It is found that four energy gaps and corresp...The frequency in middle of magnon energy band in a five-layer ferromagnetic superlattice is studied by using the linear spin-wave approach and Green＇s function technique. It is found that four energy gaps and corresponding four frequencie in middle of energy gaps exist in the magnon band along Kx direction perpendicular to the superlattice plane. The spin quantum numbers and the interlayer exchange couplings all affect the four frequencies in middle of the energy gaps. When all interlayer exchange couplings are same, the effect of spin quantum numbers on the frequency wg1 in middle of the energy gap Δw12 is complicated, and the frequency wg1 depends on the match of spin quantum numbers in each layer. Meanwhile, the frequencies wg2, wg3, and wg4 in middle of other energy gaps increase monotonously with increasing spin quantum numbers. When the spin quantum numbers in each layer are same, the frequencies wg1, wg2, wg3, and wg4 all increase monotonously with increasing interlayer exchange couplings.展开更多
Recently,abacafibers have become the focus of specialized research due to their intriguing characteristics,with their outstanding mechanical properties being a particularly notable.In the conducted study,the abacafibers...Recently,abacafibers have become the focus of specialized research due to their intriguing characteristics,with their outstanding mechanical properties being a particularly notable.In the conducted study,the abacafibers underwent a preliminary treatment process involving an alkaline solution,which was composed of 0.5%sodium hydroxide(NaOH)and 50%acetic acid(CH3COOH).This process entailed immersing eachfiber in the solution for a period of one hour.This treatment led to a 52.36%reduction in lignin content compared to the levels before treatment,resulting in a dramatic decrease in the full width at half maximum(FWHM)in the XRD spectra from 1.13 to 0.13.This change indicates that thefibers became more crystalline following the treatment.The abacafibers were also characterized using BET(Brunauer Emmett Teller)measurements,which revealed that the aver-age pore length ranged from 33–49 nm and the surface area was between 13–28 m^(2)·g^(-1).The morphology of the abacafiber after alkali an hydrolisis treatment(AFAH)appeared rougher and more uniform.DMA measurements revealed a significant rise in the storage modulus of the singlefiber post-treatment,with dependencies on both frequency and temperature.AFAH exhibited an optimal absorption coefficient ofα=0.9 for frequencies above 2500 Hz.The combined effect of alkalization and hydrolyzation treatments,while resulting in an enhancement in the mechanical properties of thefibers,also reduced high-intensity noise produced by sources such as machin-ery,aircraft takeoffs and landings,etc.,across a broader working frequency range.展开更多
Mitigating low-frequency noise poses a significant challenge for acoustic engineers,due to their long wavelength,with conventional porous sound absorbers showing limitations in attenuating such noise.An effective stra...Mitigating low-frequency noise poses a significant challenge for acoustic engineers,due to their long wavelength,with conventional porous sound absorbers showing limitations in attenuating such noise.An effective strategy involves combining porous materials with micro-perforated plates(MPP)to address this issue.Given the significant impact of structural variables like panel thickness,hole diameter,and air gap on the acoustic characteristics of MPP,achieving the optimal condition demands numerous sample iterations.The impedance tube’s considerable expense for sound absorption measurement and the substantial cost involved in fabricating each sample using a 3D printer underscore the advantage of utilizing simulation methods to attain the optimal state.This study focuses on optimizing low-frequency enhancement by investigating key parameters.Using the Finite Element Numerical Method(FEM)in COMSOL software,a composite panel was constructed comprising date palm fiber layers,an intervening air layer,and MPP.The study explored the arrangement of these layers and the impact of parameters like hole diameter,plate thickness,and perforation ratio on acoustic behavior.The selected optimal parameter at each stage was consistently maintained for subsequent steps.Results revealed that layer arrangement significantly influenced acoustic characteristics.Placing the MPP layer before the porous material yielded superior low-frequency performance.Optimizing low-frequency behavior involved reducing hole diameter and perforation ratio while increasing plate thickness.Elevating the porous material’s thickness relative to the air layer behind the MPP enhanced absorption peak and resonance frequency.In conclusion,halving the porous layer’s thickness while incorporating an air layer and single MPP proved more effective than using a thick porous material.This approach not only reduces costs and space requirements but also enhances low-frequency performance.The study highlights the precision of numerical methods like FEM,reducing the need for resource-intensive direct methods and associated laboratory expenses.展开更多
基金National Natural Science Foundation of China(No.10475010)
文摘Plasma polymerized maleic anhydride （MA） was carried out by using maleic anhydride supersaturated ethanol solution as a precursor in a dielectric barrier discharge （DBD）. The film properties were characterized by water contact angle （WCA）, Fourier transfer infrared （FTIR）, X-ray photoelectron spectroscopy （XPS）, atomic force microscope （AFM） analysis, and a thickness profilometer. The influence of the processing parameters on the film properties such as tile power frequency and polymerization zone was investigated. The results show that anhydride group incorporated into the growing films is favorable at the frequency of 80 kHz and working pressure of 50 Pa. The poly （maleic anhydride） film is uniform and compact at an average deposition rate of 8 nm/min.
文摘Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.
基金Funded by the National Natural Science Foundation of China (NSFC)(No.50475157)the Key Fund of NSFC (No.50234022)the Key Project of Ministry of Education of China (No.105052)
文摘The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and tensile properties are investigated.The results show that the microstructures of ZK60 magnesium alloy are refined and distribution uniformity of precipitations is observed after applying the middle frequency electromagnetic field.And the tensile properties of the billets produced by middle frequency electromagnetic field are increased.
基金Supported by the Natural Science Foundation of Liaoning Province of China under Grant No. 20062040
文摘The frequency in middle of magnon energy band in a five-layer ferromagnetic superlattice is studied by using the linear spin-wave approach and Green＇s function technique. It is found that four energy gaps and corresponding four frequencie in middle of energy gaps exist in the magnon band along Kx direction perpendicular to the superlattice plane. The spin quantum numbers and the interlayer exchange couplings all affect the four frequencies in middle of the energy gaps. When all interlayer exchange couplings are same, the effect of spin quantum numbers on the frequency wg1 in middle of the energy gap Δw12 is complicated, and the frequency wg1 depends on the match of spin quantum numbers in each layer. Meanwhile, the frequencies wg2, wg3, and wg4 in middle of other energy gaps increase monotonously with increasing spin quantum numbers. When the spin quantum numbers in each layer are same, the frequencies wg1, wg2, wg3, and wg4 all increase monotonously with increasing interlayer exchange couplings.
文摘Recently,abacafibers have become the focus of specialized research due to their intriguing characteristics,with their outstanding mechanical properties being a particularly notable.In the conducted study,the abacafibers underwent a preliminary treatment process involving an alkaline solution,which was composed of 0.5%sodium hydroxide(NaOH)and 50%acetic acid(CH3COOH).This process entailed immersing eachfiber in the solution for a period of one hour.This treatment led to a 52.36%reduction in lignin content compared to the levels before treatment,resulting in a dramatic decrease in the full width at half maximum(FWHM)in the XRD spectra from 1.13 to 0.13.This change indicates that thefibers became more crystalline following the treatment.The abacafibers were also characterized using BET(Brunauer Emmett Teller)measurements,which revealed that the aver-age pore length ranged from 33–49 nm and the surface area was between 13–28 m^(2)·g^(-1).The morphology of the abacafiber after alkali an hydrolisis treatment(AFAH)appeared rougher and more uniform.DMA measurements revealed a significant rise in the storage modulus of the singlefiber post-treatment,with dependencies on both frequency and temperature.AFAH exhibited an optimal absorption coefficient ofα=0.9 for frequencies above 2500 Hz.The combined effect of alkalization and hydrolyzation treatments,while resulting in an enhancement in the mechanical properties of thefibers,also reduced high-intensity noise produced by sources such as machin-ery,aircraft takeoffs and landings,etc.,across a broader working frequency range.
文摘Mitigating low-frequency noise poses a significant challenge for acoustic engineers,due to their long wavelength,with conventional porous sound absorbers showing limitations in attenuating such noise.An effective strategy involves combining porous materials with micro-perforated plates(MPP)to address this issue.Given the significant impact of structural variables like panel thickness,hole diameter,and air gap on the acoustic characteristics of MPP,achieving the optimal condition demands numerous sample iterations.The impedance tube’s considerable expense for sound absorption measurement and the substantial cost involved in fabricating each sample using a 3D printer underscore the advantage of utilizing simulation methods to attain the optimal state.This study focuses on optimizing low-frequency enhancement by investigating key parameters.Using the Finite Element Numerical Method(FEM)in COMSOL software,a composite panel was constructed comprising date palm fiber layers,an intervening air layer,and MPP.The study explored the arrangement of these layers and the impact of parameters like hole diameter,plate thickness,and perforation ratio on acoustic behavior.The selected optimal parameter at each stage was consistently maintained for subsequent steps.Results revealed that layer arrangement significantly influenced acoustic characteristics.Placing the MPP layer before the porous material yielded superior low-frequency performance.Optimizing low-frequency behavior involved reducing hole diameter and perforation ratio while increasing plate thickness.Elevating the porous material’s thickness relative to the air layer behind the MPP enhanced absorption peak and resonance frequency.In conclusion,halving the porous layer’s thickness while incorporating an air layer and single MPP proved more effective than using a thick porous material.This approach not only reduces costs and space requirements but also enhances low-frequency performance.The study highlights the precision of numerical methods like FEM,reducing the need for resource-intensive direct methods and associated laboratory expenses.
