The aim of this paper was to characterize through experiment the moisture and temperature kinetic behavior of Eucalyptus gomphocephala wood samples using microwave heating(MWH)in two scenarios:intermittently and conti...The aim of this paper was to characterize through experiment the moisture and temperature kinetic behavior of Eucalyptus gomphocephala wood samples using microwave heating(MWH)in two scenarios:intermittently and continuously.The mechanical properties and surface appearance of the heated samples were also investigated.Continuous and intermittent microwave drying kinetic experiments were conducted at a frequency of 2.45 GHz using a microwave laboratory oven at 300,500,and 1000 watts.Drying rate curves indicated three distinct phases of MWH.Increasing the microwave power with a shorter drying time led to rapid increases in internal temperature and water evaporation rates of the heated samples.Mechanical results indicated that samples heated under continuous MW(Microwave)power at 300 watts had a modulus of rupture(MOR)and modulus of elasticity(MOE)in three static bending tests higher than 29%and 36%,respectively,than samples heated at 1000 watts.Intermittent microwave heating(IMWH)of samples at 300 and 1000 watts produced the highest MOR and MOE values of 31%and 51%,respectively,unlike those heated under continuous microwave heating(CMWH).External qualitative observation showed that samples heated at high microwave power had severe surface checks.These defects were missing when using IMWH.An analysis of variance(ANOVA)showed that mechanical properties were linked to both microwave power level and the heating scenario,except for MOR in axial compression under CMWH.展开更多
The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D i...The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D interconnected pore structure was prepared through the high pressure pyrolysis of mesophase coal tar pitch.It is found that the 3D interconnected cellular pores of MPCF facilitate multiple reflections of electromagnetic waves,which results in the minimum reflection loss(RLmin)value of MPCF reaches-37.84 dB with the effective absorption bandwidth(EAB)of 5.44 GHz at a thickness of 2.70 mm,and the total average electromagnetic shielding effectiveness(SE_(T))under 3.00 mm thickness achieves 26.52 dB in X-band.Subsequently,MPCF is activated by KOH to obtain activated carbon foam(A-MPCF).The average SE_(T)of A-MPCF achieves 103.00 dB for abundant nanopores on the pore cell walls,which leads to a transition from the multiple reflections of electromagnetic waves on the walls to diffuse reflection.Unfortunately,the reflection coefficient(R)of A-MPCF increases from 0.78 to 0.90.To reduce the R value,Fe_(3)O_(4)/A-MPCF was fabricated via the in situ growth of nano Fe_(3)O_(4)on A-MPCF.Consequently,the R value of Fe_(3)O_(4)/A-MPCF was reduced from 0.90 to 0.74,whereas the MWA performance was only slightly decreased.This work proposes a simple strategy for simultaneously adjusting MWA and EMI shielding performances of materials.展开更多
With the rapid development of modern electronic technology,the demand for high-performance microwave absorption materials has increased dramatically.In order to meet this demand,the electrospinning of FeNiCo/carbon na...With the rapid development of modern electronic technology,the demand for high-performance microwave absorption materials has increased dramatically.In order to meet this demand,the electrospinning of FeNiCo/carbon nanofiber(FeNiCo/CNF)composites with excellent microwave absorption properties was developed,and their potential as high frequency microwave absorption materials was evaluated.Experiment showed that FeNiCo/CNFs achieve a minimum reflection loss(RL_(min))of−55.5 dB with a matching thickness of only 1.6 mm.Microstructure analysis and electromagnetic parameter testing showed that the excellent microwave absorbing properties were mainly due to the combined effect of the network structure of carbon nanofibers and the FeNiCo alloy.This interaction promotes multiple reflections and the efficient absorption of microwaves.Computer simulation also showed that the FeNiCo/CNF composites produce an excellent radar cross-section reduction in typical radar operating frequency bands,which validates their potential application in stealth technology.This is a new concept in the development of high-performance microwave absorption materials.展开更多
This study explores the thin-layer convective solar drying of Marrubium vulgare L.leaves under conditions typical of sun-rich semi-arid climates.Drying experiments were conducted at three inlet-air temperatures(40℃,5...This study explores the thin-layer convective solar drying of Marrubium vulgare L.leaves under conditions typical of sun-rich semi-arid climates.Drying experiments were conducted at three inlet-air temperatures(40℃,50℃,60℃)and two air velocities(1.5 and 2.5 m·s^(-1))using an indirect solar dryer with auxiliary temperature control.Moisture-ratio data were fitted with eight widely used thin-layer models and evaluated using correlation coefficient(r),root-mean-square error(RMSE),and Akaike information criterion(AIC).A complementary heattransfer analysis based on Reynolds and Prandtl numbers with appropriate Nusselt correlations was used to relate flow regime to drying performance,and an energy balance quantified the relative contributions of solar and auxiliary heat.The logarithmic model consistently achieved the lowest RMSE/AIC with r>0.99 across all conditions.Higher temperature and air velocity significantly reduced drying time during the decreasing-rate period,with no constantrate stage observed.On average,solar input supplied the large majority of the thermal demand,while the auxiliary heater compensated short irradiance drops to maintain setpoints.These findings provide a reproducible dataset and a modelling benchmark for M.vulgare leaves,and they support energy-aware design of hybrid solar dryers formedicinal plants in sun-rich regions.展开更多
In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on th...In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on the results of thermogravimetric experiment and single factor experiment.By fitting three common mathematical models,the Page model with the highest fitting degree was selected to determine the most suitable mathematical model to describe the municipal sludge drying process.In addition,the Box-Behnken design principle in the response surface method was used to analyze the interaction of three factors on the drying characteristics of municipal sludge.The results of the study show that below 100℃is the optimal drying temperature range for municipal sludge.The results of single factor experiments showed that the order of influence of the three factors on sludge drying time was CaO concentration>sawdust concentration>lignite dust concentration.In the single factor experiment,the optimal process parameterswere CaOconcentration 3%,lignite powder concentration 7%,and sawdust concentration 7%.In themulti-factor interaction analysis,the interaction between CaO and sawdust had the most significant effect on the reduction of drying time,and the order of influence was as follows:CaO interaction with sawdust>lignite dust interaction with sawdust>CaO interaction with lignite powder.Further analysis showed that the optimal process ratio was 3%CaO concentration and 3%sawdust concentration.展开更多
BACKGROUND Data comparing the outcomes of hepatocellular carcinoma(HCC)ablation by multibipolar radiofrequency ablation(mbp-RFA)and microwave ablation(MWA)are lacking.This study compares safety and efficacy of the two...BACKGROUND Data comparing the outcomes of hepatocellular carcinoma(HCC)ablation by multibipolar radiofrequency ablation(mbp-RFA)and microwave ablation(MWA)are lacking.This study compares safety and efficacy of the two techniques in treatment-naive HCC.AIM To compare the risk of local tumor progression(LTP)according to the technique;secondary endpoints included technique efficacy rate at one-month,overall survival and major complication rate.METHODS A bi-institutional retrospective analysis of patients undergoing treatment-naive HCC ablation by either technique was performed.Inverse probability of treatment weighting was used to compare the two groups.Mixed effects multivariate Cox regression was applied to identify risk factors for LTP.RESULTS A total of 362 patients(mean age,66.1±6.2 years,308 men)were included,of which 242(323 tumors)treated by mbp-RFA and 120(168 tumors)by MWA.After a median follow-up of 27 months,cumulative LTP was 11.4%after mbp-RFA and 25.2%after MWA.Independent risk factors for LTP at multivariate analysis were MWA(hazard ratio=2.85,P<0.001)and tumor size(hazard ratio=1.08,P<0.001).Two-year LTP-free survival was higher after mbp-RFA than MWA regardless of size(<3 cm:96%vs 87.1%,P<0.01;≥3 cm:87.5%vs 74%,P=0.04).Technique efficacy rate was higher after mbp-RFA(94.1%vs 87.5%,P=0.01).No difference was observed in major complication rate(9.5%vs 7.5%,P=0.59),nor 5-year overall survival(63.6%vs 58.3%,P=0.33).CONCLUSION Mbp-RFA leads to better local tumor control of treatment-naïve HCC than MWA regardless of tumor size and has better primary efficacy,while maintaining a comparable safety profile.展开更多
This study aimed to investigate the influence of recycled sand(RS)content and water-binder ratio on the long term performance of recycled sand concrete(RSC).A 220 days drying shrinkage and creep test of RSC was conduc...This study aimed to investigate the influence of recycled sand(RS)content and water-binder ratio on the long term performance of recycled sand concrete(RSC).A 220 days drying shrinkage and creep test of RSC was conducted,and the microhardness of ITZ were analyzed to explain the differences in performance.The experimental results indicate that,when RS content is 50%,the drying shrinkage and creep strain of RSC is the smallest.This is attributed to the highest microhardness in the ITZ when the RS content is 50%.When the RS content is 100%,the shrinkage and creep strains increase due to the high water absorption of RS,which leads to the evaporation of additional water and the deterioration of the ITZ.As the water-binder ratio increases,the drying shrinkage and creep strain of RSC with different RS content increases.According to the EC2 specification and the CEB-FIP specification,the drying shrinkage and creep prediction models for RSC have been established.展开更多
While microwave(MW)discharge technology has been developed to address the challenges inherent in shar-pening metal-bonded diamond grinding wheels(MD-GW),the surface morphology and grinding performance characteristics ...While microwave(MW)discharge technology has been developed to address the challenges inherent in shar-pening metal-bonded diamond grinding wheels(MD-GW),the surface morphology and grinding performance characteristics of wheels processed through this method remain insufficiently characterized and warrant further investigation.This study employed an in-situ experimental setup to analyze MD-GW sharpened through MW discharge,with a focus on abrasive damage,grit protrusion height and uniformity,the number of effective abrasives,chip space,and bond morphology.The grinding performance of MW-sharpened MD-GW was assessed based on dynamic grinding ratios and surface quality in zirconia grinding experiments,using mechanical sharpening as the comparison group.The results revealed that MW sharpening enhanced abrasive integrity when compared to mechanical methods,albeit with minor graphitization and localized oxidative damage occurring.Furthermore,after being sharpened by the MW method,the grit protrusion height increased,demonstrating good uniformity,and simultaneously exhibiting a higher number of effective abrasives.Noticeable craters formed in proximity to the abrasives,augmenting chip space,but sputtering led to the formation of metal deposition layers on the abrasive surfaces.The MW-sharpened wheel exhibited superior grinding wear ratios,with dynamic grinding ratios initially increasing and subsequently decreasing as the grinding process pro-gressed.These enhancements in surface morphology allowed the MW-sharpened MD-GW to remove zirconia ceramics in a ductile manner,resulting in improved grinding surface quality.The importance of this study lies in the development of an innovative sharpening technique that improved the surface morphology quality of MD-GW,with potential ramifications for enhancing the efficiency and quality of grinding difficult-to-machine materials.展开更多
Microwave ablation(MWA)is a minimally invasive technique for treating hepatic tumors,necessitating precise monitoring to ensure treatment efficacy and minimize damage to surrounding tissues.This study explores the pot...Microwave ablation(MWA)is a minimally invasive technique for treating hepatic tumors,necessitating precise monitoring to ensure treatment efficacy and minimize damage to surrounding tissues.This study explores the potential of photoacoustic imaging(PAI)in monitoring MWA by examining ex vivo porcine liver tissues.In this study,a comprehensive analysis of photoacoustic signals was performed to compare the main lobe width(MLW)between ablated and normal regions in porcine liver tissue.Histological staining with succinate dehydrogenase(SDH)and shear wave elastography(SWE)were employed to validate the changes in tissue elasticity after ablation.The analysis demonstrated a notable reduction in the MLW of the average A-lines in ablated tissues compared to nonablated regions(p<0.01).This reduction,attributed to increased tissue density and enhanced elasticity,indicates accelerated sound propagation in thermally ablated areas,which then serves as a critical parameter for mapping tissue characteristics.The reconstruction of the MLW distribution successfully delineated the ablated regions,and was consistent with the results of SDH staining and SWE.In addition,MLW-based imaging exhibited higher spatial resolution compared to SWE.Incorporating MLW analysis into PAI may be a promising strategy to improve the accuracy and effectiveness of MWA monitoring in clinical settings.展开更多
The Microwave Land Surface Emissivity(MLSE)atlas and instantaneous simulation of all-sky/all-surface MLSE are important prerequisites for satellite data assimilation.A ten-day/month synthesized FengYun-3D MLSE atlas(N...The Microwave Land Surface Emissivity(MLSE)atlas and instantaneous simulation of all-sky/all-surface MLSE are important prerequisites for satellite data assimilation.A ten-day/month synthesized FengYun-3D MLSE atlas(New_FY3D)was constructed by the two global MLSE daily product datasets,clear-sky(FY-3D1)and clear/cloudy(FY-3D2),which were retrieved from the same FY-3D MicroWave Radiation Imager(MWRI)Level-1 brightness temperature(BT)data from 2021 to 2022,respectively.Then,a set of global MLSE label samples based on the New_FY3D,including 14 surface geophysical parameters,was obtained for an instantaneous global MLSE simulation at a 0.10°spatial resolution by adopting the extreme gradient boosting(XGBoost)machine learning method.Finally,the FengYun-3F(FY-3F)MWRI-II BT simulations using the Advanced Radiative Transfer Modeling System(ARMS)based on the above different MLSE products were evaluated.The results show that the New_FY3D atlas performs well,and the BT simulation at the top of atmosphere is better than that of FY-3D1,FY-3D2,and the international mainstream TELSEM2(Version 2.0 for a Tool to Estimate Land Surface Emissivities in the Microwaves)atlas.Surface roughness,vegetation coverage,land cover type,and snow cover are vital parameters for MLSE simulation.The XGBoost model can accurately simulate all-sky/all-surface MLSE instantaneously over the frequency range 10.65–89.0 GHz.The average simulation determination coefficients(R^(2))under clear-sky and cloud-sky conditions are 0.925 and 0.901,respectively,and the average root-mean-square errors(RMSEs)are 0.018 and 0.021,respectively.Large simulation errors occur in permanent wetland,ice and snow,and urban and built-up areas.With a standard deviation of 6.6 K,the BT simulation based on an XGBoost simulated MLSE is better than those based on New_FY3D and TELSEM2.展开更多
Microwave roasting self-leaching is an innovative method for recovering gold from high-sulfur refractory gold concentrates,without using deadly toxic cyanide reagents.However,the mechanism of gold self-leaching,which ...Microwave roasting self-leaching is an innovative method for recovering gold from high-sulfur refractory gold concentrates,without using deadly toxic cyanide reagents.However,the mechanism of gold self-leaching,which relies on lixiviants prepared using volatilized sulfur obtained from roasting,has not been fully elucidated.This study employs the response surface methodology to optimize processing parameters,resulting in an increased gold extraction rate of 96.18%.Analytical factorization and the Tafel curve indicate that CuSO_(4) and NH_(3)·H_(2)O significantly influence the self-leaching process.Furthermore,X-ray photoelectron spectroscopy(XPS)analysis reveals that S^(2−),S_(2)^(2−),polysulfides(S_(n)^(2−)),and thiosulfate(S_(2)O_(3)^(2−))are involved in the gold leaching reaction,with S^(2−),S_(2)^(2−),and S_(n)^(2−) serving as primary ligands for gold complexation.The role of S_(2)O_(3)^(2−) in the early stages of the gold-leaching reaction is also noteworthy.The copper–ammonia complex catalyzes the self-leaching gold reaction;however,an improper addition ratio can lead to copper-sulfur compound precipitates,reducing the extraction rate.展开更多
The microwave drying of ilmenite was investigated.The effects of power levels and sample mass on drying characteristics of moisture content,drying rate,moisture ratio were studied,with microwave power ranging from 119...The microwave drying of ilmenite was investigated.The effects of power levels and sample mass on drying characteristics of moisture content,drying rate,moisture ratio were studied,with microwave power ranging from 119 W to 700 W and sample mass from 5 g to 25 g.The drying processes were completed within 2-8 min at different conditions.The moisture content and drying rates are found to be dramatically affected by microwave power density.For all drying processes the prior microwave absorption of moisture produces an accelerating peak on the drying rate curves in the initial stage.For the sample mass of 25 g and power of 385 W,the drying kinetics were studied.The experimental results fit better to the Henderson-Pabis index model rather than the Page＇s semi-empirical model;the drying rate constant k is increased with the increase of microwave power and decrease of sample mass.展开更多
Microwave absorption(MA)materials often face poor synergy between impedance matching and attenuation in the low-frequency range.Balancing permittivity and permeability through magnetic-dielectric synergy is a promisin...Microwave absorption(MA)materials often face poor synergy between impedance matching and attenuation in the low-frequency range.Balancing permittivity and permeability through magnetic-dielectric synergy is a promising strategy to address this issue.To realize the synergy,herein,Sn whiskers with an in situ oxide layer served as substrates for magnetic-loss-active CoNi nanosheet growth,forming a hierarchical CoNi@SnO_(2)@Sn(CNS)heterostructure.The CNS absorber achieves a minimum reflection loss(RL_(min))value of-62.29 dB with an effective absorption bandwidth(EAB)of 2.2 GHz,covering the entire C-band with 70%absorption at only 2.61 mm thickness.The nanosheet design of CoNi enhances magnetic anisotropy to promote natural resonance,while the conductive Sn core and abundant Sn/SnO_(2) and CoNi/SnO_(2) heterointerfaces facilitate conduction loss and dielectric polarization.When composited into a thermoplastic polyurethane(TPU)matrix,the resulting CNS/TPU-2 film(20 wt%CNS)exhibits an RL_(min) value of-61.04 dB and a 2.5 GHz EAB.Its in-plane and through-plane thermal conductivities reach 2.41 and 0.51 W m^(-1) K^(-1),representing 4.1 and 2.6 times those of pure TPU films,respectively,facilitating heat dissipation from protected devices.This work provides valuable insights into magnetic-dielectric synergy for low-frequency MA of 1D metal-based materials,offering promising potential for 5G communications and flexible electronics.展开更多
Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures ...Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures were prepared through digital light processing(DLP)3D printing,polymer-derived ceramics(PDCs),chemical vapor infiltration(CVI),and oxidation technologies.The incorporation of the CVISiC phase effectively increases the dissipation capability,while the synergistic interaction between the gyroid structure and SiO_(2)phase significantly improves impedance matching performance.The SiOC/SiC/SiO_(2)composite achieved a minimum reflection loss(RL min)of-62.2 d B at 4.3 mm,and the effective absorption bandwidth(EAB)covered the X-band,with a thickness range of 4.1 mm-4.65 mm.The CST simulation results explain the broadband and low-frequency absorption characteristics,with an EAB of 8.4 GHz(9.6-18 GHz)and an RL min of-21.5 dB at 5 GHz.The excellent EM wave attenuation performance is associated primarily with polarization loss,conduction loss,the gyroid structure's enhancement of multiple reflections and scattering of EM waves,and the resonance effect between the structural units.The SiOC/SiC/SiO_(2)composite also demonstrated strong mechanical properties,with a maximum compressive failure strength of 31.6 MPa in the height direction.This work opens novel prospects for the development of multifunctional structural wave-absorbing materials suitable for broadband microwave absorption and load-bearing properties.展开更多
Alternate wetting and drying irrigation(AWD)significantly influences the cooking and eating quality of rice(Oryza sativa L.).However,the mechanisms by which AWD affects rice cooking and eating quality remain unclear.L...Alternate wetting and drying irrigation(AWD)significantly influences the cooking and eating quality of rice(Oryza sativa L.).However,the mechanisms by which AWD affects rice cooking and eating quality remain unclear.Lipid and free fatty acid contents in grains correlate positively with cooking and eating quality of rice.This study examined Yangdao 6(YD6,a conventional taste indica inbred)and Nanjing 9108(NJ9108,a superior taste japonica inbred)cultivated under conventional irrigation(CI),alternate wetting and moderate drying irrigation(AWMD),and alternate wetting and severe drying irrigation(AWSD)from 10 days after transplanting to maturity.The research investigated the relationship between lipid and free fatty acid biosynthesis in grains and the cooking and eating quality of rice.Compared to CI treatment,AWMD significantly enhanced the contents of lipid,total free fatty acids(TFFAs),free unsaturated fatty acids(FUFAs),linoleic acid,and oleic acid in milled rice by increasing activities of enzymes associated with lipid synthesis,while AWSD produced opposite effects.Correlation analysis revealed that elevated levels of lipid,TFFAs,FUFAs,linoleic acid,and oleic acid contribute to improved rice cooking and eating quality.The findings demonstrate that AWMD enhances cooking and eating quality of milled rice through optimization of lipid and fatty acid synthesis in rice grains.展开更多
The combined microwave-convective drying is a novel drying method and has many advantages, such as swift drying, equable drying and sterilization. This paper studies the drying characteristic of medical pill in microw...The combined microwave-convective drying is a novel drying method and has many advantages, such as swift drying, equable drying and sterilization. This paper studies the drying characteristic of medical pill in microwave-convective drying process. The influential parameters of pill drying characteristics including pill size, quality, air velocity, temperature and the input power of microwave, are experimentally investigated. Results show that the drying process is influenced by the intrinsic heat of microwave power, and the environment and the resistance of mass transfer. It has the advantage of the microwave-convective drying in saving energy, reducing labor intensity and sterilizing. The method with the high efficiency is suitable for pharmacy industry.展开更多
In the non-linear microwave drying process, the incremental improved back-propagation （BP） neural network and response surface methodology （RSM） were used to build a predictive model of the combined effects of ind...In the non-linear microwave drying process, the incremental improved back-propagation （BP） neural network and response surface methodology （RSM） were used to build a predictive model of the combined effects of independent variables （the microwave power, the acting time and the rotational frequency） for microwave drying of selenium-rich slag. The optimum operating conditions obtained from the quadratic form of the RSM are： the microwave power of 14.97 kW, the acting time of 89.58 min, the rotational frequency of 10.94 Hz, and the temperature of 136.407 ℃. The relative dehydration rate of 97.1895% is obtained. Under the optimum operating conditions, the incremental improved BP neural network prediction model can predict the drying process results and different effects on the results of the independent variables. The verification experiments demonstrate the prediction accuracy of the network, and the mean squared error is 0.16. The optimized results indicate that RSM can optimize the experimental conditions within much more broad range by considering the combination of factors and the neural network model can predict the results effectively and provide the theoretical guidance for the follow-up production process.展开更多
Ovalbumin(OVA),the main protein in egg white,affects most of the functional properties of egg white protein in food processing.The aim of this study was to investigate the effects of spray drying(SD)and microwave free...Ovalbumin(OVA),the main protein in egg white,affects most of the functional properties of egg white protein in food processing.The aim of this study was to investigate the effects of spray drying(SD)and microwave freeze drying(MFD)on the preparation of hydrolyzed/glycosylated ovalbumin(HGOVA)and provide useful information on the applications of egg protein powders in the food industry.Results demonstrated that the structure of HGOVA was considerably changed,and its functional properties were improved compared with those of native OVA.SD and MFD processing did not lead to dissociation of HGOVA subunits.SD-HGOVA exhibited higher protein solubility,emulsifying activity,foaming capacities,and gel hardness than MFD-HGOVA.However,MFD-HGOVA was better than the SD-HGOVA in terms of color,emulsion stability,foam stability,water/oil absorption capacity,and thermal stability.Selection of an appropriate drying method could enhance the potential applications of HGOVA in the food industry.展开更多
The general objective of this work is to analyze energy input in a vacuum process with the incorporation of microwave heating. Thus, necessary criteria for designing an efficient freeze-drying operation are considered...The general objective of this work is to analyze energy input in a vacuum process with the incorporation of microwave heating. Thus, necessary criteria for designing an efficient freeze-drying operation are considered through the analysis of strategies based on the combination of different intensities of radiant and microwave heating.The other aim of this research topic is to study the kinetics of drying in relation to mass transfer parameters.Five freeze-drying strategies using both heating systems were used. Consequently, energy input could be related to diffusivity coefficients, temperature and pressure profiles during dehydration of the product and analyzed in comparison to a conventional freeze-drying process.展开更多
The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and wi...The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.展开更多
文摘The aim of this paper was to characterize through experiment the moisture and temperature kinetic behavior of Eucalyptus gomphocephala wood samples using microwave heating(MWH)in two scenarios:intermittently and continuously.The mechanical properties and surface appearance of the heated samples were also investigated.Continuous and intermittent microwave drying kinetic experiments were conducted at a frequency of 2.45 GHz using a microwave laboratory oven at 300,500,and 1000 watts.Drying rate curves indicated three distinct phases of MWH.Increasing the microwave power with a shorter drying time led to rapid increases in internal temperature and water evaporation rates of the heated samples.Mechanical results indicated that samples heated under continuous MW(Microwave)power at 300 watts had a modulus of rupture(MOR)and modulus of elasticity(MOE)in three static bending tests higher than 29%and 36%,respectively,than samples heated at 1000 watts.Intermittent microwave heating(IMWH)of samples at 300 and 1000 watts produced the highest MOR and MOE values of 31%and 51%,respectively,unlike those heated under continuous microwave heating(CMWH).External qualitative observation showed that samples heated at high microwave power had severe surface checks.These defects were missing when using IMWH.An analysis of variance(ANOVA)showed that mechanical properties were linked to both microwave power level and the heating scenario,except for MOR in axial compression under CMWH.
基金Supported by the National Natural Science Foundation of China(22378181).
文摘The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D interconnected pore structure was prepared through the high pressure pyrolysis of mesophase coal tar pitch.It is found that the 3D interconnected cellular pores of MPCF facilitate multiple reflections of electromagnetic waves,which results in the minimum reflection loss(RLmin)value of MPCF reaches-37.84 dB with the effective absorption bandwidth(EAB)of 5.44 GHz at a thickness of 2.70 mm,and the total average electromagnetic shielding effectiveness(SE_(T))under 3.00 mm thickness achieves 26.52 dB in X-band.Subsequently,MPCF is activated by KOH to obtain activated carbon foam(A-MPCF).The average SE_(T)of A-MPCF achieves 103.00 dB for abundant nanopores on the pore cell walls,which leads to a transition from the multiple reflections of electromagnetic waves on the walls to diffuse reflection.Unfortunately,the reflection coefficient(R)of A-MPCF increases from 0.78 to 0.90.To reduce the R value,Fe_(3)O_(4)/A-MPCF was fabricated via the in situ growth of nano Fe_(3)O_(4)on A-MPCF.Consequently,the R value of Fe_(3)O_(4)/A-MPCF was reduced from 0.90 to 0.74,whereas the MWA performance was only slightly decreased.This work proposes a simple strategy for simultaneously adjusting MWA and EMI shielding performances of materials.
基金supported by the Natural Science Foundation of Shanxi Province(202203021212205)Shanxi Province Major Science and Technology Special Project‘Jiebang Guashuai’Project(202101120401008)+1 种基金National Natural Science Foundation of China(52371231)Key R&D Program of Shanxi Province(202302040201008).
文摘With the rapid development of modern electronic technology,the demand for high-performance microwave absorption materials has increased dramatically.In order to meet this demand,the electrospinning of FeNiCo/carbon nanofiber(FeNiCo/CNF)composites with excellent microwave absorption properties was developed,and their potential as high frequency microwave absorption materials was evaluated.Experiment showed that FeNiCo/CNFs achieve a minimum reflection loss(RL_(min))of−55.5 dB with a matching thickness of only 1.6 mm.Microstructure analysis and electromagnetic parameter testing showed that the excellent microwave absorbing properties were mainly due to the combined effect of the network structure of carbon nanofibers and the FeNiCo alloy.This interaction promotes multiple reflections and the efficient absorption of microwaves.Computer simulation also showed that the FeNiCo/CNF composites produce an excellent radar cross-section reduction in typical radar operating frequency bands,which validates their potential application in stealth technology.This is a new concept in the development of high-performance microwave absorption materials.
文摘This study explores the thin-layer convective solar drying of Marrubium vulgare L.leaves under conditions typical of sun-rich semi-arid climates.Drying experiments were conducted at three inlet-air temperatures(40℃,50℃,60℃)and two air velocities(1.5 and 2.5 m·s^(-1))using an indirect solar dryer with auxiliary temperature control.Moisture-ratio data were fitted with eight widely used thin-layer models and evaluated using correlation coefficient(r),root-mean-square error(RMSE),and Akaike information criterion(AIC).A complementary heattransfer analysis based on Reynolds and Prandtl numbers with appropriate Nusselt correlations was used to relate flow regime to drying performance,and an energy balance quantified the relative contributions of solar and auxiliary heat.The logarithmic model consistently achieved the lowest RMSE/AIC with r>0.99 across all conditions.Higher temperature and air velocity significantly reduced drying time during the decreasing-rate period,with no constantrate stage observed.On average,solar input supplied the large majority of the thermal demand,while the auxiliary heater compensated short irradiance drops to maintain setpoints.These findings provide a reproducible dataset and a modelling benchmark for M.vulgare leaves,and they support energy-aware design of hybrid solar dryers formedicinal plants in sun-rich regions.
基金the National Natural Science Foundation of China,grant number 52406074the China Postdoctoral Science Foundation under Grant Number 2025T180171+1 种基金the Natural Science Foundation of Guangdong Province(2025A1515011270)the China Southern Power Grid Technology Project(GDKJXM20231415/030100KC23120104).
文摘In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on the results of thermogravimetric experiment and single factor experiment.By fitting three common mathematical models,the Page model with the highest fitting degree was selected to determine the most suitable mathematical model to describe the municipal sludge drying process.In addition,the Box-Behnken design principle in the response surface method was used to analyze the interaction of three factors on the drying characteristics of municipal sludge.The results of the study show that below 100℃is the optimal drying temperature range for municipal sludge.The results of single factor experiments showed that the order of influence of the three factors on sludge drying time was CaO concentration>sawdust concentration>lignite dust concentration.In the single factor experiment,the optimal process parameterswere CaOconcentration 3%,lignite powder concentration 7%,and sawdust concentration 7%.In themulti-factor interaction analysis,the interaction between CaO and sawdust had the most significant effect on the reduction of drying time,and the order of influence was as follows:CaO interaction with sawdust>lignite dust interaction with sawdust>CaO interaction with lignite powder.Further analysis showed that the optimal process ratio was 3%CaO concentration and 3%sawdust concentration.
文摘BACKGROUND Data comparing the outcomes of hepatocellular carcinoma(HCC)ablation by multibipolar radiofrequency ablation(mbp-RFA)and microwave ablation(MWA)are lacking.This study compares safety and efficacy of the two techniques in treatment-naive HCC.AIM To compare the risk of local tumor progression(LTP)according to the technique;secondary endpoints included technique efficacy rate at one-month,overall survival and major complication rate.METHODS A bi-institutional retrospective analysis of patients undergoing treatment-naive HCC ablation by either technique was performed.Inverse probability of treatment weighting was used to compare the two groups.Mixed effects multivariate Cox regression was applied to identify risk factors for LTP.RESULTS A total of 362 patients(mean age,66.1±6.2 years,308 men)were included,of which 242(323 tumors)treated by mbp-RFA and 120(168 tumors)by MWA.After a median follow-up of 27 months,cumulative LTP was 11.4%after mbp-RFA and 25.2%after MWA.Independent risk factors for LTP at multivariate analysis were MWA(hazard ratio=2.85,P<0.001)and tumor size(hazard ratio=1.08,P<0.001).Two-year LTP-free survival was higher after mbp-RFA than MWA regardless of size(<3 cm:96%vs 87.1%,P<0.01;≥3 cm:87.5%vs 74%,P=0.04).Technique efficacy rate was higher after mbp-RFA(94.1%vs 87.5%,P=0.01).No difference was observed in major complication rate(9.5%vs 7.5%,P=0.59),nor 5-year overall survival(63.6%vs 58.3%,P=0.33).CONCLUSION Mbp-RFA leads to better local tumor control of treatment-naïve HCC than MWA regardless of tumor size and has better primary efficacy,while maintaining a comparable safety profile.
基金Funded by the National Key Research and Development Program of China(No.2020YFC1909905)the Science and Technology Research and Development Plan of China National Railway Group Co.,Ltd.(No.L2022G009)the New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘This study aimed to investigate the influence of recycled sand(RS)content and water-binder ratio on the long term performance of recycled sand concrete(RSC).A 220 days drying shrinkage and creep test of RSC was conducted,and the microhardness of ITZ were analyzed to explain the differences in performance.The experimental results indicate that,when RS content is 50%,the drying shrinkage and creep strain of RSC is the smallest.This is attributed to the highest microhardness in the ITZ when the RS content is 50%.When the RS content is 100%,the shrinkage and creep strains increase due to the high water absorption of RS,which leads to the evaporation of additional water and the deterioration of the ITZ.As the water-binder ratio increases,the drying shrinkage and creep strain of RSC with different RS content increases.According to the EC2 specification and the CEB-FIP specification,the drying shrinkage and creep prediction models for RSC have been established.
基金Supported by Hunan Provincial Natural Science Foundation(Grant Nos.2023JJ60182 and 2025JJ50273)Scientific Research Fund of Hunan Provincial Education Department(Grant Nos.22B0561 and 23C0188)National Natural Science Foundation of China(Grant No.52305465).
文摘While microwave(MW)discharge technology has been developed to address the challenges inherent in shar-pening metal-bonded diamond grinding wheels(MD-GW),the surface morphology and grinding performance characteristics of wheels processed through this method remain insufficiently characterized and warrant further investigation.This study employed an in-situ experimental setup to analyze MD-GW sharpened through MW discharge,with a focus on abrasive damage,grit protrusion height and uniformity,the number of effective abrasives,chip space,and bond morphology.The grinding performance of MW-sharpened MD-GW was assessed based on dynamic grinding ratios and surface quality in zirconia grinding experiments,using mechanical sharpening as the comparison group.The results revealed that MW sharpening enhanced abrasive integrity when compared to mechanical methods,albeit with minor graphitization and localized oxidative damage occurring.Furthermore,after being sharpened by the MW method,the grit protrusion height increased,demonstrating good uniformity,and simultaneously exhibiting a higher number of effective abrasives.Noticeable craters formed in proximity to the abrasives,augmenting chip space,but sputtering led to the formation of metal deposition layers on the abrasive surfaces.The MW-sharpened wheel exhibited superior grinding wear ratios,with dynamic grinding ratios initially increasing and subsequently decreasing as the grinding process pro-gressed.These enhancements in surface morphology allowed the MW-sharpened MD-GW to remove zirconia ceramics in a ductile manner,resulting in improved grinding surface quality.The importance of this study lies in the development of an innovative sharpening technique that improved the surface morphology quality of MD-GW,with potential ramifications for enhancing the efficiency and quality of grinding difficult-to-machine materials.
基金supported by the National Natural Science Foundation of China(82427808,61875085)the Jiangsu Provincial University Natural Science Foundation(25KJB413004)+1 种基金the Nanjing Health Science and Technology Development Foundation(ZKX24043)the Fundamental Research Funds for the Central Universities(NJ2024029).
文摘Microwave ablation(MWA)is a minimally invasive technique for treating hepatic tumors,necessitating precise monitoring to ensure treatment efficacy and minimize damage to surrounding tissues.This study explores the potential of photoacoustic imaging(PAI)in monitoring MWA by examining ex vivo porcine liver tissues.In this study,a comprehensive analysis of photoacoustic signals was performed to compare the main lobe width(MLW)between ablated and normal regions in porcine liver tissue.Histological staining with succinate dehydrogenase(SDH)and shear wave elastography(SWE)were employed to validate the changes in tissue elasticity after ablation.The analysis demonstrated a notable reduction in the MLW of the average A-lines in ablated tissues compared to nonablated regions(p<0.01).This reduction,attributed to increased tissue density and enhanced elasticity,indicates accelerated sound propagation in thermally ablated areas,which then serves as a critical parameter for mapping tissue characteristics.The reconstruction of the MLW distribution successfully delineated the ablated regions,and was consistent with the results of SDH staining and SWE.In addition,MLW-based imaging exhibited higher spatial resolution compared to SWE.Incorporating MLW analysis into PAI may be a promising strategy to improve the accuracy and effectiveness of MWA monitoring in clinical settings.
基金supported by the National Natural Science Foundation of China(Grant No.U2242211)the Hunan Provincial Natural Science Foundation Major Project(Grant No.2021JC0009).
文摘The Microwave Land Surface Emissivity(MLSE)atlas and instantaneous simulation of all-sky/all-surface MLSE are important prerequisites for satellite data assimilation.A ten-day/month synthesized FengYun-3D MLSE atlas(New_FY3D)was constructed by the two global MLSE daily product datasets,clear-sky(FY-3D1)and clear/cloudy(FY-3D2),which were retrieved from the same FY-3D MicroWave Radiation Imager(MWRI)Level-1 brightness temperature(BT)data from 2021 to 2022,respectively.Then,a set of global MLSE label samples based on the New_FY3D,including 14 surface geophysical parameters,was obtained for an instantaneous global MLSE simulation at a 0.10°spatial resolution by adopting the extreme gradient boosting(XGBoost)machine learning method.Finally,the FengYun-3F(FY-3F)MWRI-II BT simulations using the Advanced Radiative Transfer Modeling System(ARMS)based on the above different MLSE products were evaluated.The results show that the New_FY3D atlas performs well,and the BT simulation at the top of atmosphere is better than that of FY-3D1,FY-3D2,and the international mainstream TELSEM2(Version 2.0 for a Tool to Estimate Land Surface Emissivities in the Microwaves)atlas.Surface roughness,vegetation coverage,land cover type,and snow cover are vital parameters for MLSE simulation.The XGBoost model can accurately simulate all-sky/all-surface MLSE instantaneously over the frequency range 10.65–89.0 GHz.The average simulation determination coefficients(R^(2))under clear-sky and cloud-sky conditions are 0.925 and 0.901,respectively,and the average root-mean-square errors(RMSEs)are 0.018 and 0.021,respectively.Large simulation errors occur in permanent wetland,ice and snow,and urban and built-up areas.With a standard deviation of 6.6 K,the BT simulation based on an XGBoost simulated MLSE is better than those based on New_FY3D and TELSEM2.
基金supported by the National Natural Science Foundation of China(No.51974016).
文摘Microwave roasting self-leaching is an innovative method for recovering gold from high-sulfur refractory gold concentrates,without using deadly toxic cyanide reagents.However,the mechanism of gold self-leaching,which relies on lixiviants prepared using volatilized sulfur obtained from roasting,has not been fully elucidated.This study employs the response surface methodology to optimize processing parameters,resulting in an increased gold extraction rate of 96.18%.Analytical factorization and the Tafel curve indicate that CuSO_(4) and NH_(3)·H_(2)O significantly influence the self-leaching process.Furthermore,X-ray photoelectron spectroscopy(XPS)analysis reveals that S^(2−),S_(2)^(2−),polysulfides(S_(n)^(2−)),and thiosulfate(S_(2)O_(3)^(2−))are involved in the gold leaching reaction,with S^(2−),S_(2)^(2−),and S_(n)^(2−) serving as primary ligands for gold complexation.The role of S_(2)O_(3)^(2−) in the early stages of the gold-leaching reaction is also noteworthy.The copper–ammonia complex catalyzes the self-leaching gold reaction;however,an improper addition ratio can lead to copper-sulfur compound precipitates,reducing the extraction rate.
基金Project(2007CB613606)supported by the National Basic Research Program of ChinaProject(50734007)supported by the National Natural Science Foundation of China
文摘The microwave drying of ilmenite was investigated.The effects of power levels and sample mass on drying characteristics of moisture content,drying rate,moisture ratio were studied,with microwave power ranging from 119 W to 700 W and sample mass from 5 g to 25 g.The drying processes were completed within 2-8 min at different conditions.The moisture content and drying rates are found to be dramatically affected by microwave power density.For all drying processes the prior microwave absorption of moisture produces an accelerating peak on the drying rate curves in the initial stage.For the sample mass of 25 g and power of 385 W,the drying kinetics were studied.The experimental results fit better to the Henderson-Pabis index model rather than the Page＇s semi-empirical model;the drying rate constant k is increased with the increase of microwave power and decrease of sample mass.
基金supported by the National Natural Science Foundation of China(52171033,52431003,U23A20574)the Fundamental Research Funds for the Central Universities(2242025K20004)the SEU Innovation Capability Enhancement Plan for Doctoral Students(CXJH_SEU 24148,CXJH_SEU 25036).
文摘Microwave absorption(MA)materials often face poor synergy between impedance matching and attenuation in the low-frequency range.Balancing permittivity and permeability through magnetic-dielectric synergy is a promising strategy to address this issue.To realize the synergy,herein,Sn whiskers with an in situ oxide layer served as substrates for magnetic-loss-active CoNi nanosheet growth,forming a hierarchical CoNi@SnO_(2)@Sn(CNS)heterostructure.The CNS absorber achieves a minimum reflection loss(RL_(min))value of-62.29 dB with an effective absorption bandwidth(EAB)of 2.2 GHz,covering the entire C-band with 70%absorption at only 2.61 mm thickness.The nanosheet design of CoNi enhances magnetic anisotropy to promote natural resonance,while the conductive Sn core and abundant Sn/SnO_(2) and CoNi/SnO_(2) heterointerfaces facilitate conduction loss and dielectric polarization.When composited into a thermoplastic polyurethane(TPU)matrix,the resulting CNS/TPU-2 film(20 wt%CNS)exhibits an RL_(min) value of-61.04 dB and a 2.5 GHz EAB.Its in-plane and through-plane thermal conductivities reach 2.41 and 0.51 W m^(-1) K^(-1),representing 4.1 and 2.6 times those of pure TPU films,respectively,facilitating heat dissipation from protected devices.This work provides valuable insights into magnetic-dielectric synergy for low-frequency MA of 1D metal-based materials,offering promising potential for 5G communications and flexible electronics.
基金financially supported by National Natural Science Foundation of China(Grant Nos.12141203,52202083,W2421013)the Natural Science Foundation Project of Shaanxi Province(Grant No.2024JC-YBMS-450)+1 种基金the Sichuan Science and Technology Program(Grant No.2024YFHZ0265)the Open Project of High-end Equipment Advanced Materials and Manufacturing Technology Laboratory(Grant No.2023KFKT0005)。
文摘Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures were prepared through digital light processing(DLP)3D printing,polymer-derived ceramics(PDCs),chemical vapor infiltration(CVI),and oxidation technologies.The incorporation of the CVISiC phase effectively increases the dissipation capability,while the synergistic interaction between the gyroid structure and SiO_(2)phase significantly improves impedance matching performance.The SiOC/SiC/SiO_(2)composite achieved a minimum reflection loss(RL min)of-62.2 d B at 4.3 mm,and the effective absorption bandwidth(EAB)covered the X-band,with a thickness range of 4.1 mm-4.65 mm.The CST simulation results explain the broadband and low-frequency absorption characteristics,with an EAB of 8.4 GHz(9.6-18 GHz)and an RL min of-21.5 dB at 5 GHz.The excellent EM wave attenuation performance is associated primarily with polarization loss,conduction loss,the gyroid structure's enhancement of multiple reflections and scattering of EM waves,and the resonance effect between the structural units.The SiOC/SiC/SiO_(2)composite also demonstrated strong mechanical properties,with a maximum compressive failure strength of 31.6 MPa in the height direction.This work opens novel prospects for the development of multifunctional structural wave-absorbing materials suitable for broadband microwave absorption and load-bearing properties.
基金supported by the Natural Science Foundation of Jiangsu Province,China(BK20241931 and BK 20221371)the National Natural Science Foundation of China(32071943,32372214,and 31901444)the National Key Research and Development Program of China(2022YFD2300304)。
文摘Alternate wetting and drying irrigation(AWD)significantly influences the cooking and eating quality of rice(Oryza sativa L.).However,the mechanisms by which AWD affects rice cooking and eating quality remain unclear.Lipid and free fatty acid contents in grains correlate positively with cooking and eating quality of rice.This study examined Yangdao 6(YD6,a conventional taste indica inbred)and Nanjing 9108(NJ9108,a superior taste japonica inbred)cultivated under conventional irrigation(CI),alternate wetting and moderate drying irrigation(AWMD),and alternate wetting and severe drying irrigation(AWSD)from 10 days after transplanting to maturity.The research investigated the relationship between lipid and free fatty acid biosynthesis in grains and the cooking and eating quality of rice.Compared to CI treatment,AWMD significantly enhanced the contents of lipid,total free fatty acids(TFFAs),free unsaturated fatty acids(FUFAs),linoleic acid,and oleic acid in milled rice by increasing activities of enzymes associated with lipid synthesis,while AWSD produced opposite effects.Correlation analysis revealed that elevated levels of lipid,TFFAs,FUFAs,linoleic acid,and oleic acid contribute to improved rice cooking and eating quality.The findings demonstrate that AWMD enhances cooking and eating quality of milled rice through optimization of lipid and fatty acid synthesis in rice grains.
文摘The combined microwave-convective drying is a novel drying method and has many advantages, such as swift drying, equable drying and sterilization. This paper studies the drying characteristic of medical pill in microwave-convective drying process. The influential parameters of pill drying characteristics including pill size, quality, air velocity, temperature and the input power of microwave, are experimentally investigated. Results show that the drying process is influenced by the intrinsic heat of microwave power, and the environment and the resistance of mass transfer. It has the advantage of the microwave-convective drying in saving energy, reducing labor intensity and sterilizing. The method with the high efficiency is suitable for pharmacy industry.
基金Project(50734007) supported by the National Natural Science Foundation of China
文摘In the non-linear microwave drying process, the incremental improved back-propagation （BP） neural network and response surface methodology （RSM） were used to build a predictive model of the combined effects of independent variables （the microwave power, the acting time and the rotational frequency） for microwave drying of selenium-rich slag. The optimum operating conditions obtained from the quadratic form of the RSM are： the microwave power of 14.97 kW, the acting time of 89.58 min, the rotational frequency of 10.94 Hz, and the temperature of 136.407 ℃. The relative dehydration rate of 97.1895% is obtained. Under the optimum operating conditions, the incremental improved BP neural network prediction model can predict the drying process results and different effects on the results of the independent variables. The verification experiments demonstrate the prediction accuracy of the network, and the mean squared error is 0.16. The optimized results indicate that RSM can optimize the experimental conditions within much more broad range by considering the combination of factors and the neural network model can predict the results effectively and provide the theoretical guidance for the follow-up production process.
基金Natural Science Foundation of China(No.U1704114)Key Scientific Research Program of Henan Province(No.182102110346,161100110900).
文摘Ovalbumin(OVA),the main protein in egg white,affects most of the functional properties of egg white protein in food processing.The aim of this study was to investigate the effects of spray drying(SD)and microwave freeze drying(MFD)on the preparation of hydrolyzed/glycosylated ovalbumin(HGOVA)and provide useful information on the applications of egg protein powders in the food industry.Results demonstrated that the structure of HGOVA was considerably changed,and its functional properties were improved compared with those of native OVA.SD and MFD processing did not lead to dissociation of HGOVA subunits.SD-HGOVA exhibited higher protein solubility,emulsifying activity,foaming capacities,and gel hardness than MFD-HGOVA.However,MFD-HGOVA was better than the SD-HGOVA in terms of color,emulsion stability,foam stability,water/oil absorption capacity,and thermal stability.Selection of an appropriate drying method could enhance the potential applications of HGOVA in the food industry.
文摘The general objective of this work is to analyze energy input in a vacuum process with the incorporation of microwave heating. Thus, necessary criteria for designing an efficient freeze-drying operation are considered through the analysis of strategies based on the combination of different intensities of radiant and microwave heating.The other aim of this research topic is to study the kinetics of drying in relation to mass transfer parameters.Five freeze-drying strategies using both heating systems were used. Consequently, energy input could be related to diffusivity coefficients, temperature and pressure profiles during dehydration of the product and analyzed in comparison to a conventional freeze-drying process.
基金Project(51090385) supported by the Major Program of National Natural Science Foundation of ChinaProject(2011IB001) supported by Yunnan Provincial Science and Technology Program,China+1 种基金Project(2012DFA70570) supported by the International Science & Technology Cooperation Program of ChinaProject(2011IA004) supported by the Yunnan Provincial International Cooperative Program,China
文摘The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.
