Refractory high/medium-entropy alloys(RH/MEAs)are known for their outstanding performance at el-evated temperatures;however,they usually exhibit poor room-temperature plasticity,which can be at-tributed to the non-uni...Refractory high/medium-entropy alloys(RH/MEAs)are known for their outstanding performance at el-evated temperatures;however,they usually exhibit poor room-temperature plasticity,which can be at-tributed to the non-uniform deformation that occurs at room temperature.Once cracks nucleate,they will rapidly propagate into vertical splitting cracks.Here,we introduce multiple phases including FCC and HCP phases into the NbMoTa RMEA via appropriate addition of carbon.The results show that multiple-phase synergy effectively suppresses non-uniform deformation,thereby delaying the onset of vertical splitting cracks.An optimal combination of compressive strength-plasticity is achieved by the(NbMoTa)_(92.5)C_(7.5) alloy.The significant improvement in room-temperature mechanical properties can be attributed to its hierarchical microstructure:in the mesoscale,the BCC matrix is divided by eutectic structures;while at the microscale,the BCC matrix is further refined by abundant lath-like FCC precipitates.The FCC precip-itates contain high-density stacking faults,acting as a dislocation source under compressive loading.The HCP phase in the eutectic microstructures,in turn,acts as a strong barrier to dislocation movement and simultaneously increases the dislocation storage capacity.These findings open a new route to tailor the microstructure and mechanical properties of RH/MEAs.展开更多
Ferroelastic rare earth tantalates(RETaO_(4))are widely researched as the next-generation thermal barrier coatings(TBCs),and RETaO_(4)powders are hugely significant for synthesizing their coatings.The current research...Ferroelastic rare earth tantalates(RETaO_(4))are widely researched as the next-generation thermal barrier coatings(TBCs),and RETaO_(4)powders are hugely significant for synthesizing their coatings.The current research used chemical co-precipitation within an automated experimental device to synthesize RETaO_(4)(RE=Nd,Sm,Gd,Ho,Er)powders.The device automatically monitored and controlled the solutions'pH,improving the chemical co-precipitation efficiency.The crystal structure and microstructure of the RETaO_(4)powders can be controlled by changing the annealing temperature,and the materials undergo an m'-m phase transition.The m'-RETaO_(4)powders exhibit nano-size grains,while m-RETaO_(4)powders evince micron-size grains,altered by the annealing temperatures.A simultaneous thermal analysis es-timates the reversive ferroelastic tetragonal-monoclinic phase transition temperatures.Overall,this research focuses on the synthesis,crystal structures,microstructures,and phase transition of the fabricated RETaO_(4)powders.展开更多
Microscale metallic structures enhanced by additive manufacturing technology have attracted extensive attention especially in microelectronics and electromechanical devices.Meniscus-confined electrodeposition(MCED)adv...Microscale metallic structures enhanced by additive manufacturing technology have attracted extensive attention especially in microelectronics and electromechanical devices.Meniscus-confined electrodeposition(MCED)advances microscale 3D metal printing,enabling simpler fabrication of superior metallic microstructures in air without complex equipment or post-processing.However,accurately predicting growth rates with current MCED techniques remain challenging,which is essential for precise structure fabrication and preventing nozzle clogging.In this work,we present a novel approach to electrochemical 3D printing that utilizes a self-adjusting,voxelated method for fabricating metallic microstructures.Diverging from conventional voxelated printing which focuses on monitoring voxel thickness for structure control,this technique adopts a holistic strategy.It ensures each voxel’s position is in alignment with the final structure by synchronizing the micropipette’s trajectory during deposition with the intended design,thus facilitating self-regulation of voxel position and reducing errors associated with environmental fluctuations in deposition parameters.The method’s ability to print micropillars with various tilt angles,high density,and helical arrays demonstrates its refined control over the deposition process.Transmission electron microscopy analysis reveals that the deposited structures,which are fabricated through layer-by-layer(voxel)printing,contain nanotwins that are widely known to enhance the material’s mechanical and electrical properties.Correspondingly,in situ scanning electron microscopy(SEM)microcompression tests confirm this enhancement,showing these structures exhibit a compressive yield strength exceeding 1 GPa.The indentation tests provided an average hardness of 3.71 GPa,which is the highest value reported in previous work using MCED.The resistivity measured by the four-point probe method was(1.95±0.01)×10^(−7)Ω·m,nearly 11 times that of bulk copper.These findings demonstrate the considerable advantage of this technique in fabricating complex metallic microstructures with enhanced mechanical properties,making it suitable for advanced applications in microsensors,microelectronics,and micro-electromechanical systems.展开更多
The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.T...The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.The novel structural features of GBDP(Nd,Ce)-Fe-B magnets give a version of different domain reversal processes from those of non-diffused magnets.In this work,the in-situ magnetic domain evolution of the DMP magnets was observed at elevated temperatures,and the temperature demagnetization and coercivity mechanism of the GBDP dual-main-phase(Nd,Ce)-Fe-B magnets are discussed.The results show that the shell composition of different types of grains in DMP magnets is similar,while the magnetic microstructure results indicate the Ce-rich grains tend to demagnetize first.Dy-rich shell with a high anisotropic field caused by GBDP leads to an increase in the nucleation field,which enhances the coercivity.It is found that much more grains exhibit single domain characteristics in the remanent state for GBDP dual-main-phase(Nd,Ce)-Fe-B magnets.In addition,the grains that undergo demagnetization first are Ce-rich or Nd-rich grains,which is different from that of non-diffused magnets.These results were not found in previous studies but can be intuitively characterized from the perspective of magnetic domains in this work,providing a new perspective and understanding of the performance improvement of magnetic materials.展开更多
The effect of different intermediate annealing heat treatments on the surface microstructures and anodic oxide film structures of rolled Al-5.6Mg sheets was studied.The results show that when the continuous annealing ...The effect of different intermediate annealing heat treatments on the surface microstructures and anodic oxide film structures of rolled Al-5.6Mg sheets was studied.The results show that when the continuous annealing is used to control microstructures of the sheets instead of the static state annealing in the intermediate annealing process,the surface grain size of the sheets can be reduced by about 65.7%,and the size of the Mg precipitation phase(Mg_(2)Al_(3))can be reduced by about 67%.Under the combined influence of grain size,precipitation phase,and texture,the highest glossiness can be obtained,which is attributed to continuous intermediate annealing and stabilization annealing at low temperature.The uniform grain and precipitation structures is beneficial to reducing the inhomogeneous dissolution of the oxide film and to obtain the anodic oxide film with uniform thickness and high glossiness.展开更多
The microstructures,mechanical properties,and fracture behaviors of an Al-5.9Zn-1.9Mg alloy subjected to thermomechanical treatment across different pre-rolling temperatures have been exhaustively investigated in pres...The microstructures,mechanical properties,and fracture behaviors of an Al-5.9Zn-1.9Mg alloy subjected to thermomechanical treatment across different pre-rolling temperatures have been exhaustively investigated in present work.The pre-deformation temperature exerts a modest influence on grain morphology,while it profoundly impacts the dislocation configurations and precipitation behaviors.Elevating the rolling temperature from ambient to 170℃results in a reduction in dislocation density within grains accompanied by a notable enhancement in their distributional uniformity.While advancing the temperature to 320℃prompts the premature formation of precipitates during deformation,which diminishes the precipitation during the subsequent ageing.Tensile results reveal that the thermomechanical treatment incorporating pre-rolling at 170℃confers a substantial strengthening effect on the alloy on the basis of both grain boundary strengthening and dislocation strengthening stemmed from pre-deformation along with the precipitation strengthening generated by ageing.Furthermore,the microstructure exhibits a relatively scarce presence of inhomogeneous features such as dislocation pile-ups and micro shear bands,contributing favorably to enhance the ductility of the alloy that presents the mixture of cleavage fracture and dimple-induced failure.展开更多
Optical singularities are topological defects of electromagnetic fields;they include phase singularity in scalar fields,polarization singularity in vector fields,and three-dimensional(3D)singularities such as optical ...Optical singularities are topological defects of electromagnetic fields;they include phase singularity in scalar fields,polarization singularity in vector fields,and three-dimensional(3D)singularities such as optical skyrmions.The exploitation of photonic microstructures to generate and manipulate optical singularities has attracted wide research interest in recent years,with many photonic microstructures having been devised to this end.Accompanying these designs,scattered phenomenological theories have been proposed to expound the working mechanisms behind individual designs.In this work,instead of focusing on a specific type of microstructure,we concentrate on the most common geometric features of these microstructures—namely,symmetries—and revisit the process of generating optical singularities in microstructures from a symmetry viewpoint.By systematically employing the projection operator technique in group theory,we develop a widely applicable theoretical scheme to explore optical singularities in microstructures with rosette(i.e.,rotational and reflection)symmetries.Our scheme agrees well with previously reported works and further reveals that the eigenmodes of a symmetric microstructure can support multiplexed phase singularities in different components,such as out-of-plane,radial,azimuthal,and left-and right-handed circular components.Based on these phase singularities,more complicated optical singularities may be synthesized,including C points,V points,L lines,Néel-and bubble-type optical skyrmions,and optical lattices,to name a few.We demonstrate that the topological invariants associated with optical singularities are protected by the symmetries of the microstructure.Lastly,based on symmetry arguments,we formulate a so-called symmetry matching condition to clarify the excitation of a specific type of optical singularity.Our work establishes a unified theoretical framework to explore optical singularities in photonic microstructures with symmetries,shedding light on the symmetry origin of multidimensional and multiplexed optical singularities and providing a symmetry perspective for exploring many singularity-related effects in optics and photonics.展开更多
It is one of the big bottleneck problems for graphene to be uniformly distributed in ceramic matrix composites. A two-step approach was applied to prepare Graphene Nanoplatelets/Yt tria-Stabilized Zirconia(GNPs/YSZ) c...It is one of the big bottleneck problems for graphene to be uniformly distributed in ceramic matrix composites. A two-step approach was applied to prepare Graphene Nanoplatelets/Yt tria-Stabilized Zirconia(GNPs/YSZ) composites. Initially, GNPs were combined with YSZ through nanoparticle regranulation technology to obtain uniformly dispersed powders. Subsequently, the prepared powders were sintered by Spark Plasma Sintering(SPS). Systematic investigation was carried out to examine how GNPs regulate the phase, microstructures, and nanomechanical properties of GNPs/YSZ composite ceramics with different sintering temperatures.Results show that the GNPs can inhibit the coalescence of adjacent grains in YSZ ceramics. Herein,we propose that the intensity ratio of 2D peak to G peak of GNPs in Raman spectrum serves as a key indicator to assess the nanomechanical properties of GNPs/YSZ composites. When the intensity ratio of 2D peak to G peak is 0.5–0.6, the GNPs/YSZ composites obtained in the sintering temperature range of 1 200–1 250.C exhibit excellent nanomechanical properties such as hardness,elastic modulus, wear and creep resistance.展开更多
F-actin microstructures dominate cellular viscoelasticity and have been used to identify the migration and malignance of living cancer cells.Diabetic cancer patients suffer from increased metastasis and tumor recurren...F-actin microstructures dominate cellular viscoelasticity and have been used to identify the migration and malignance of living cancer cells.Diabetic cancer patients suffer from increased metastasis and tumor recurrence.However,the long-term evolution and correlation of F-actin microstructures and viscoelasticity distribution are still poorly understood in living cancer cells under varying glucose environment.Herein,by using atomic force microscopy with amplitude modulation-frequency modulation and nanoindentation mode,we characterized the hierarchical F-actin microstructures and the multi-passage viscoelasticity evolution in living Huh-7 cancer cells transferred from high to low glucose level.The highly oriented stress fibers connected by thinner fiber networks were observed in high glucose environment.The circumferential actin networks composed by straight segment-like fibers and the randomly distributed actin fragments connected by ultrathin crosslinking fibers were observed in low glucose environment.The viscoelasticity within the nucleus and the cytoplasm of living Huh-7 cancer cells showed longterm fluctuations over tens of passages after switching glucose environments.The viscoelasticity of cytoplasm was more responsive to the change of glucose environments than nucleus,which was due to the reorganization of F-actin microstructures.Our work provides the microstructural and nanomechanical understanding on the migration and proliferation of living cancer cells under varying glucose environment.展开更多
Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor m...Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor micro-LED displays.However,the impact of solvent on both the printing process and the morphology of SIJ-printed PNC color conversion microstructures remains underexplored.In this study,we prepared samples of CsPbBr3PNC colloid inks in various solvents and investigated the solvent's impact on SIJ printed PNC microstructures.Our findings reveal that the boiling point of the solvent is crucial to the SIJ printing process of PNC colloid inks.Only does the boiling point of the solvent fall in the optimal range,the regular positioned,micron-scaled,conical PNC microstructures can be successfully printed.Below this optimal range,the ink is unable to be ejected from the nozzle;while above this range,irregular positioned microstructures with nanoscale height and coffee-ring-like morphology are produced.Based on these observations,high-resolution color conversion PNC microstructures were effectively prepared using SIJ printing of PNC colloid ink dispersed in dimethylbenzene solvent.展开更多
The fracture behavior at high temperatures of the Ti−22Al−26Nb alloy,which features duplex lamellar,bimodal,and Widmanstätten structures,was studied.Samples of the alloy were prepared through compression deformat...The fracture behavior at high temperatures of the Ti−22Al−26Nb alloy,which features duplex lamellar,bimodal,and Widmanstätten structures,was studied.Samples of the alloy were prepared through compression deformation in the trans-phase region followed by subsequent heat treatment.The results indicate that at 650℃,the fracture toughness of the Ti−22Al−26Nb alloy is increased by 41.7%compared to that with original microstructures.The content of the B2 phase significantly influences the inherent fracture toughness of the material,while the morphology and distribution of the precipitated phases primarily affect the tortuosity of the crack propagation path.Among the microstructural features,the morphology and geometric orientation of the lamellae most significantly impact the crack path;consequently,the Widmanstätten structure exhibits the most tortuous fracture path.Additionally,a predictive model for fracture toughness is developed,which effectively predicts the fracture toughness of Ti−22Al−26Nb alloys with various microstructures at 650℃.展开更多
The hot compression curves and deformed microstructures were investigated under various hot deformation conditions in three states:hot isostatic pressing(HIP,A1),HIP+hot extrusion at 1100℃(A2),and HIP+hot extrusion a...The hot compression curves and deformed microstructures were investigated under various hot deformation conditions in three states:hot isostatic pressing(HIP,A1),HIP+hot extrusion at 1100℃(A2),and HIP+hot extrusion at 1150℃(A3).The results show that A2 sample,extruded at 1100℃ with uniform γ+γ′duplex microstructures,demonstrates excellent hot deformation behavior at both 1050 and 1100℃.The true stress-true strain curves of A2 sample maintain a hardening-softening equilibrium over a larger strain range,with post-deformation average grain size of 5μm.The as-HIPed A1 sample and 1150℃ extruded A3 sample exhibit a softening region in deformation curves at 1050℃,and the grain microstructures reflect an incomplete recrystallized state,i.e.combination of fine recrystallized grains and initial larger grains,characterized by a necklace-like microstructure.The predominant recrystallization mechanism for these samples is strain-induced boundary migration.At 1150℃ with a strain rate of 0.001 s^(-1),the influence of the initial microstructure on hot deformation behavior and resultant microstructure is relatively less pronounced,and postdeformation microstructures are fully recrystallized grains.Fine-grained microstructures are conducive to maximizing the hot deformation potential of alloy.By judiciously adjusting deformation regimes,a fine and uniform deformed microstructure can be obtained.展开更多
The microstructures and mechanical properties of Al-8.3Zn-3.3Cu-2.2Mg alloys prepared via hot extrusion and liquid forging methods were investigated.Results show that based on DEFORM simulation analysis,the optimal ho...The microstructures and mechanical properties of Al-8.3Zn-3.3Cu-2.2Mg alloys prepared via hot extrusion and liquid forging methods were investigated.Results show that based on DEFORM simulation analysis,the optimal hot extrusion parameters are determined as ingot initial temperature of 380°C and extrusion speed of 3 mm/s.The hot-extruded aluminum alloy after T6 heat treatment presents superior mechanical properties with yield strength of 519.6 MPa,ultimate tensile strength of 582.1 MPa,and elongation of 11.0%.Compared with the properties of gravity-cast and liquid-forged alloys,the yield strength of hot-extruded alloy increases by 30.8%and 4.9%,and the ultimate tensile strength improves by 43.5%and 10.2%,respectively.The significant improvement in tensile strength of the hot-extruded alloys is attributed to the elimination of casting defects and the refinement of matrix grain and eutectic phases.In addition,the hot-extruded alloy demonstrates superior plasticity compared with the liquid-forged alloy.This is because severe plastic deformation occurs during hot extrusion,which effectively breaks and disperses the eutectic phases,facilitating the dissolution and precipitation of the second phases and inhibiting the microcrack initiation.展开更多
The development and deployment of aluminum conductor have been significantly hampered by the contradiction of yield strength,uniform elongation,and electrical conductivity.Herein,we successfully fabricated a pure alum...The development and deployment of aluminum conductor have been significantly hampered by the contradiction of yield strength,uniform elongation,and electrical conductivity.Herein,we successfully fabricated a pure aluminum(Al)clad aluminum alloy(AA)rod with hierarchical compositions and microstructures.The proposed pure Al clad AA rod showcases an optimized combination of yield strength,uniform elongation,and electrical conductivity,i.e.,easing the restriction on improving yield strength,uniform elongation,and electrical conductivity.Compared to existing experiments,uniform elongation improved fourfold,while yield strength increased by 13%and electrical conductivity improved by 2%in terms of the international annealed copper standard(IACS).Microstructural characterizations and theoretical analyses revealed that the optimal performance of the Al clad AA arose from low-density low-angle grain boundaries(LAGBs)in the outer Al and high-density LAGBs with nanoscale precipitations in the inner AA.Our findings offer a compelling strategy for fabricating high-performance aluminum conductors,thereby laying a solid technical foundation for their wide application in power delivery systems.展开更多
The effect of carbon content on the microstructures and stress rupture properties of a newly developed polycrystalline Ni-based superalloy with high Cr content has been studied.It was observed that both grain size and...The effect of carbon content on the microstructures and stress rupture properties of a newly developed polycrystalline Ni-based superalloy with high Cr content has been studied.It was observed that both grain size and the number of carbides increased with an increase in carbon content.After heat treatment,granular M_(23)C_(6)carbides were dispersed around MC carbides along grain boundaries and inside grains.The quantity of granular M_(23)C_(6)carbides increased while their sizes decreased.These findings can be verified with the results of thermodynamic calculation and differential scanning calorimetry analysis.The stress rupture times(975℃/225 MPa)increased from 13.3 to 25.5 h with the carbon content increased from 0.1 to 0.2 wt.%.The improvement can be attributed to two primary factors.Firstly,grain boundary is typically weak region during deformation process and the grain size increased as carbon content increased in the alloy.Secondly,carbides act as hindrances to impede dislocation movement,leading to dislocation entanglement.As carbon content rose,the quantity of carbides in interdendritic regions and grain boundaries increased,providing a certain degree of strengthening effect and resulting in a longer stress rupture time.展开更多
The effect of Ti addition on microstructures and magnetic properties of B-lean(Pr,Nd)_(31.1)Fe_(67.1-x)(CoCuGa)_(1.4)Ti_(x)B_(0.9)(wt%,x=0.0,0.1,0.2,0.3,0.4)sintered magnets were investigated.The remanence Bris slight...The effect of Ti addition on microstructures and magnetic properties of B-lean(Pr,Nd)_(31.1)Fe_(67.1-x)(CoCuGa)_(1.4)Ti_(x)B_(0.9)(wt%,x=0.0,0.1,0.2,0.3,0.4)sintered magnets were investigated.The remanence Bris slightly reduced due to the deteriorated orientation degree and the diminished volume fraction of main phase caused by the existence of rod-shaped Ti-B-rich phase.However,the HcJobviously increases from1145 kA/m for x=0.0 sample to 1515 kA/m for x=0.2 sample.The results demonstrate that the increments of coercivity for x=0.2 and x=0.0 samples after post-sinter annealing(PSA)are 62.9%and 20.6%,respectively.Rod-shaped Ti-B-rich phase forms after Ti doping,which leads to the existence of6:13:1 type RE-Fe-(Cu,Ga)phase with high Fe content at triple junctions.This is beneficial to the formation of continuous thin grain boundaries with low Fe content,which can weaken the exchange coupling interaction between adjacent grains,leading to the improved coercivity.展开更多
The fracture mechanisms of coarse-grained heat-affected zone(CGHAZ)for Mg and Mg–Ca deoxidized high-strength low-alloy(HSLA)steels after high heat input welding(HHIW)were investigated based on the microstructures,cra...The fracture mechanisms of coarse-grained heat-affected zone(CGHAZ)for Mg and Mg–Ca deoxidized high-strength low-alloy(HSLA)steels after high heat input welding(HHIW)were investigated based on the microstructures,crack behaviors and mechanical properties.Compared to Mg–Ca steel,the proportion of intergranular acicular ferrites(IAFs)and polygonal ferrites(PFs)in Mg steel increases from 59.97%to 90.16%.The high-angle grain boundaries(HAGBs)and geometrically necessary dislocations density increase from 55.5%and 4.30×10^(14) m^(-2)to 70.4%and 5.48×10^(14) m^(–2),respectively,while effective grain size decreases from 9.46 to 8.12μm.The area fraction of radial zone in Mg steel decreases from 80.8%to 37.7%and cleavage plane is smaller with more curved and finer tearing ridges.The inclusions distributed at the center of cleavage planes and along river lines can serve as crack initiation sites.The zigzag pattern of primary crack propagation path has width of 476μm and the length of secondary cracks remains below 10μm.These cracks are deflected or arrested by IAFs,PFs and HAGBs,and tend to propagate along{110}plane family.These factors contribute to superior overall mechanical properties of Mg steel,especially increasing low-temperature impact toughness from 23 to 175 J.展开更多
We proposed a new measure to optimize the comprehensive magnetic properties of SmCo_(5)alloy.By compounding Fe-15Ni-3Al-1Ti(FNAT)alloy with high saturation magnetization and Sm(Co,Cu)_(5) matrix alloy in the liquid st...We proposed a new measure to optimize the comprehensive magnetic properties of SmCo_(5)alloy.By compounding Fe-15Ni-3Al-1Ti(FNAT)alloy with high saturation magnetization and Sm(Co,Cu)_(5) matrix alloy in the liquid state,an innovative two-phase separation microstructure or cellular microstructure is formed after melt-spinning using the phase separation effect of the two alloys.At the same time,the element concentration,relative phase content,and microstructure are adjusted by adding different contents of FNAT alloy.The results show that FNAT addition promotes the as-spun ribbons phase separation(or spinodal decomposition)into Co-rich SmCo_(5)-and Sm-Ni-rich CeCo_(5)-or Sm_(2)Co_(7)-type phases.Adding 3 wt.%FNAT increases the coercivity,saturation magnetization,and remanence of the ribbons by 320.6%,39.8%,and 82.8%,respectively.Adding 5 wt.%FNAT promotes forming the Sm_(2)(Co,M)_(7) cell-wall phase and increases the coercivity and remanence by 272.7%and 48.1%,respectively.Finally,the corresponding microstructure evolution models,magnetization,and demagnetization mechanisms are proposed.展开更多
The Lithium-ion deintercalation induces a significant volume change in battery electrodes during charging and discharging processes,which in turn generates a large diffusion-induced stress(DIS).This stress can cause m...The Lithium-ion deintercalation induces a significant volume change in battery electrodes during charging and discharging processes,which in turn generates a large diffusion-induced stress(DIS).This stress can cause microstructural damage,consequently degrading battery performance.This work simplifies the particles making up the electrode into spheres and studies the impact of the surface microstructure on the distribution of diffusion-induced stress.A mechanical-chemical coupling model was established to study the DIS in secondary particles,which were constructed by adding convex particles to the ball-shaped particle surfaces of the electrode material.It is observed that an increase in the number of convex particles results in a higher concentration of lithium ions within the electrode material,along with the first principal stresses within the material particles.In addition,the convex particles increase the local stresses around the ball-shaped particle surface.Therefore,a round surface on the electrode material particles is beneficial for preventing potential fractures.展开更多
Effects of intercritical annealing temperature on microstructures and mechanical properties of ultrahigh-strength dual-phase(DP) steel were investigated.Results reveal that the volume fraction of martensite increases ...Effects of intercritical annealing temperature on microstructures and mechanical properties of ultrahigh-strength dual-phase(DP) steel were investigated.Results reveal that the volume fraction of martensite increases as the intercritical annealing temperature increases.Under optimal annealing conditions, the DP steel exhibited a microstructure comprising nearly equiaxed ferrite with uniformly distributed martensite islands.Variations in micro-hardness, strength, elongation, and fracture mechanisms were closely linked to the corresponding microstructural features.展开更多
基金financial support from the Na-tional Natural Science Foundation of China(No.52231006)National Key Research and Development Program of China(No.2017YFB0702003)the National Natural Science Foundation of China(No.51871217).
文摘Refractory high/medium-entropy alloys(RH/MEAs)are known for their outstanding performance at el-evated temperatures;however,they usually exhibit poor room-temperature plasticity,which can be at-tributed to the non-uniform deformation that occurs at room temperature.Once cracks nucleate,they will rapidly propagate into vertical splitting cracks.Here,we introduce multiple phases including FCC and HCP phases into the NbMoTa RMEA via appropriate addition of carbon.The results show that multiple-phase synergy effectively suppresses non-uniform deformation,thereby delaying the onset of vertical splitting cracks.An optimal combination of compressive strength-plasticity is achieved by the(NbMoTa)_(92.5)C_(7.5) alloy.The significant improvement in room-temperature mechanical properties can be attributed to its hierarchical microstructure:in the mesoscale,the BCC matrix is divided by eutectic structures;while at the microscale,the BCC matrix is further refined by abundant lath-like FCC precipitates.The FCC precip-itates contain high-density stacking faults,acting as a dislocation source under compressive loading.The HCP phase in the eutectic microstructures,in turn,acts as a strong barrier to dislocation movement and simultaneously increases the dislocation storage capacity.These findings open a new route to tailor the microstructure and mechanical properties of RH/MEAs.
基金the Rare and Precious Metals Material Genetic Engineering Project of Yunnan Province(202102AB080019-1)National Key Research and Development Program of China(2022YFB3708600)the National Natural Science Foundation of China(91960103).
文摘Ferroelastic rare earth tantalates(RETaO_(4))are widely researched as the next-generation thermal barrier coatings(TBCs),and RETaO_(4)powders are hugely significant for synthesizing their coatings.The current research used chemical co-precipitation within an automated experimental device to synthesize RETaO_(4)(RE=Nd,Sm,Gd,Ho,Er)powders.The device automatically monitored and controlled the solutions'pH,improving the chemical co-precipitation efficiency.The crystal structure and microstructure of the RETaO_(4)powders can be controlled by changing the annealing temperature,and the materials undergo an m'-m phase transition.The m'-RETaO_(4)powders exhibit nano-size grains,while m-RETaO_(4)powders evince micron-size grains,altered by the annealing temperatures.A simultaneous thermal analysis es-timates the reversive ferroelastic tetragonal-monoclinic phase transition temperatures.Overall,this research focuses on the synthesis,crystal structures,microstructures,and phase transition of the fabricated RETaO_(4)powders.
基金supported in part by National Key R&D Program of China under Grant 2023YFB4705600in part by the National Natural Science Foundation of China under Grants 61925304,62127810 and 62203138+1 种基金in part by the National Postdoctoral Program for Innovative Talents under Grant BX20200107in part by the Self-Planned Task(No.SKLRS202205C)of State Key Laboratory of Robotics and System(HIT).
文摘Microscale metallic structures enhanced by additive manufacturing technology have attracted extensive attention especially in microelectronics and electromechanical devices.Meniscus-confined electrodeposition(MCED)advances microscale 3D metal printing,enabling simpler fabrication of superior metallic microstructures in air without complex equipment or post-processing.However,accurately predicting growth rates with current MCED techniques remain challenging,which is essential for precise structure fabrication and preventing nozzle clogging.In this work,we present a novel approach to electrochemical 3D printing that utilizes a self-adjusting,voxelated method for fabricating metallic microstructures.Diverging from conventional voxelated printing which focuses on monitoring voxel thickness for structure control,this technique adopts a holistic strategy.It ensures each voxel’s position is in alignment with the final structure by synchronizing the micropipette’s trajectory during deposition with the intended design,thus facilitating self-regulation of voxel position and reducing errors associated with environmental fluctuations in deposition parameters.The method’s ability to print micropillars with various tilt angles,high density,and helical arrays demonstrates its refined control over the deposition process.Transmission electron microscopy analysis reveals that the deposited structures,which are fabricated through layer-by-layer(voxel)printing,contain nanotwins that are widely known to enhance the material’s mechanical and electrical properties.Correspondingly,in situ scanning electron microscopy(SEM)microcompression tests confirm this enhancement,showing these structures exhibit a compressive yield strength exceeding 1 GPa.The indentation tests provided an average hardness of 3.71 GPa,which is the highest value reported in previous work using MCED.The resistivity measured by the four-point probe method was(1.95±0.01)×10^(−7)Ω·m,nearly 11 times that of bulk copper.These findings demonstrate the considerable advantage of this technique in fabricating complex metallic microstructures with enhanced mechanical properties,making it suitable for advanced applications in microsensors,microelectronics,and micro-electromechanical systems.
基金supported by the National Key Research and Development Program of China(Nos.2021YFB3503003,2021YFB3503100,and 2022YFB3505401).
文摘The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.The novel structural features of GBDP(Nd,Ce)-Fe-B magnets give a version of different domain reversal processes from those of non-diffused magnets.In this work,the in-situ magnetic domain evolution of the DMP magnets was observed at elevated temperatures,and the temperature demagnetization and coercivity mechanism of the GBDP dual-main-phase(Nd,Ce)-Fe-B magnets are discussed.The results show that the shell composition of different types of grains in DMP magnets is similar,while the magnetic microstructure results indicate the Ce-rich grains tend to demagnetize first.Dy-rich shell with a high anisotropic field caused by GBDP leads to an increase in the nucleation field,which enhances the coercivity.It is found that much more grains exhibit single domain characteristics in the remanent state for GBDP dual-main-phase(Nd,Ce)-Fe-B magnets.In addition,the grains that undergo demagnetization first are Ce-rich or Nd-rich grains,which is different from that of non-diffused magnets.These results were not found in previous studies but can be intuitively characterized from the perspective of magnetic domains in this work,providing a new perspective and understanding of the performance improvement of magnetic materials.
文摘The effect of different intermediate annealing heat treatments on the surface microstructures and anodic oxide film structures of rolled Al-5.6Mg sheets was studied.The results show that when the continuous annealing is used to control microstructures of the sheets instead of the static state annealing in the intermediate annealing process,the surface grain size of the sheets can be reduced by about 65.7%,and the size of the Mg precipitation phase(Mg_(2)Al_(3))can be reduced by about 67%.Under the combined influence of grain size,precipitation phase,and texture,the highest glossiness can be obtained,which is attributed to continuous intermediate annealing and stabilization annealing at low temperature.The uniform grain and precipitation structures is beneficial to reducing the inhomogeneous dissolution of the oxide film and to obtain the anodic oxide film with uniform thickness and high glossiness.
基金Project(ZZYJKT2025-03) supported by the Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University,ChinaProject(2024YFB3411200) supported by the National Key Research and Development Program of China。
文摘The microstructures,mechanical properties,and fracture behaviors of an Al-5.9Zn-1.9Mg alloy subjected to thermomechanical treatment across different pre-rolling temperatures have been exhaustively investigated in present work.The pre-deformation temperature exerts a modest influence on grain morphology,while it profoundly impacts the dislocation configurations and precipitation behaviors.Elevating the rolling temperature from ambient to 170℃results in a reduction in dislocation density within grains accompanied by a notable enhancement in their distributional uniformity.While advancing the temperature to 320℃prompts the premature formation of precipitates during deformation,which diminishes the precipitation during the subsequent ageing.Tensile results reveal that the thermomechanical treatment incorporating pre-rolling at 170℃confers a substantial strengthening effect on the alloy on the basis of both grain boundary strengthening and dislocation strengthening stemmed from pre-deformation along with the precipitation strengthening generated by ageing.Furthermore,the microstructure exhibits a relatively scarce presence of inhomogeneous features such as dislocation pile-ups and micro shear bands,contributing favorably to enhance the ductility of the alloy that presents the mixture of cleavage fracture and dimple-induced failure.
基金supported by the National Natural Science Foun-dation of China(62301596 and 62288101)Shaanxi Provincial Science and Technology Innovation Team(23-CX-TD-48)+4 种基金the KU Leuven internal funds:the C1 Project(C14/19/083)the Interdisciplinary Network Project(IDN/20/014)the Small Infrastructure Grant(KA/20/019)the Research Foundation of Flanders(FWO)Project(G090017N,G088822N,and V408823N)the Danish National Research Foundation(DNRF165).
文摘Optical singularities are topological defects of electromagnetic fields;they include phase singularity in scalar fields,polarization singularity in vector fields,and three-dimensional(3D)singularities such as optical skyrmions.The exploitation of photonic microstructures to generate and manipulate optical singularities has attracted wide research interest in recent years,with many photonic microstructures having been devised to this end.Accompanying these designs,scattered phenomenological theories have been proposed to expound the working mechanisms behind individual designs.In this work,instead of focusing on a specific type of microstructure,we concentrate on the most common geometric features of these microstructures—namely,symmetries—and revisit the process of generating optical singularities in microstructures from a symmetry viewpoint.By systematically employing the projection operator technique in group theory,we develop a widely applicable theoretical scheme to explore optical singularities in microstructures with rosette(i.e.,rotational and reflection)symmetries.Our scheme agrees well with previously reported works and further reveals that the eigenmodes of a symmetric microstructure can support multiplexed phase singularities in different components,such as out-of-plane,radial,azimuthal,and left-and right-handed circular components.Based on these phase singularities,more complicated optical singularities may be synthesized,including C points,V points,L lines,Néel-and bubble-type optical skyrmions,and optical lattices,to name a few.We demonstrate that the topological invariants associated with optical singularities are protected by the symmetries of the microstructure.Lastly,based on symmetry arguments,we formulate a so-called symmetry matching condition to clarify the excitation of a specific type of optical singularity.Our work establishes a unified theoretical framework to explore optical singularities in photonic microstructures with symmetries,shedding light on the symmetry origin of multidimensional and multiplexed optical singularities and providing a symmetry perspective for exploring many singularity-related effects in optics and photonics.
基金supported from the National Natural Science Foundation of China(No.52371062)the Open Foundation from National Key Laboratory of Materials Behavior and Evaluation Technology in Space Environments,China,the National Key Research and Development Program of China(No.2020YFB2007900)the National Major Science and Technology Projects of China(No.2017-VI-0020-0093).
文摘It is one of the big bottleneck problems for graphene to be uniformly distributed in ceramic matrix composites. A two-step approach was applied to prepare Graphene Nanoplatelets/Yt tria-Stabilized Zirconia(GNPs/YSZ) composites. Initially, GNPs were combined with YSZ through nanoparticle regranulation technology to obtain uniformly dispersed powders. Subsequently, the prepared powders were sintered by Spark Plasma Sintering(SPS). Systematic investigation was carried out to examine how GNPs regulate the phase, microstructures, and nanomechanical properties of GNPs/YSZ composite ceramics with different sintering temperatures.Results show that the GNPs can inhibit the coalescence of adjacent grains in YSZ ceramics. Herein,we propose that the intensity ratio of 2D peak to G peak of GNPs in Raman spectrum serves as a key indicator to assess the nanomechanical properties of GNPs/YSZ composites. When the intensity ratio of 2D peak to G peak is 0.5–0.6, the GNPs/YSZ composites obtained in the sintering temperature range of 1 200–1 250.C exhibit excellent nanomechanical properties such as hardness,elastic modulus, wear and creep resistance.
基金supported by the National Natural Science Foundation of China(Grant No.11972383)to Wenpeng Zhuby the National Natural Science Foundation of China(Grant No.12132020)to Yue Zhengby the Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices(Grant No.2022B1212010008).
文摘F-actin microstructures dominate cellular viscoelasticity and have been used to identify the migration and malignance of living cancer cells.Diabetic cancer patients suffer from increased metastasis and tumor recurrence.However,the long-term evolution and correlation of F-actin microstructures and viscoelasticity distribution are still poorly understood in living cancer cells under varying glucose environment.Herein,by using atomic force microscopy with amplitude modulation-frequency modulation and nanoindentation mode,we characterized the hierarchical F-actin microstructures and the multi-passage viscoelasticity evolution in living Huh-7 cancer cells transferred from high to low glucose level.The highly oriented stress fibers connected by thinner fiber networks were observed in high glucose environment.The circumferential actin networks composed by straight segment-like fibers and the randomly distributed actin fragments connected by ultrathin crosslinking fibers were observed in low glucose environment.The viscoelasticity within the nucleus and the cytoplasm of living Huh-7 cancer cells showed longterm fluctuations over tens of passages after switching glucose environments.The viscoelasticity of cytoplasm was more responsive to the change of glucose environments than nucleus,which was due to the reorganization of F-actin microstructures.Our work provides the microstructural and nanomechanical understanding on the migration and proliferation of living cancer cells under varying glucose environment.
基金supported by the National Natural Science Foundation of China(No.62374142)Fundamental Research Funds for the Central Universities(Nos.20720220085 and 20720240064)+2 种基金External Cooperation Program of Fujian(No.2022I0004)Major Science and Technology Project of Xiamen in China(No.3502Z20191015)Xiamen Natural Science Foundation Youth Project(No.3502Z202471002)。
文摘Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor micro-LED displays.However,the impact of solvent on both the printing process and the morphology of SIJ-printed PNC color conversion microstructures remains underexplored.In this study,we prepared samples of CsPbBr3PNC colloid inks in various solvents and investigated the solvent's impact on SIJ printed PNC microstructures.Our findings reveal that the boiling point of the solvent is crucial to the SIJ printing process of PNC colloid inks.Only does the boiling point of the solvent fall in the optimal range,the regular positioned,micron-scaled,conical PNC microstructures can be successfully printed.Below this optimal range,the ink is unable to be ejected from the nozzle;while above this range,irregular positioned microstructures with nanoscale height and coffee-ring-like morphology are produced.Based on these observations,high-resolution color conversion PNC microstructures were effectively prepared using SIJ printing of PNC colloid ink dispersed in dimethylbenzene solvent.
基金financially supported by the National Natural Science Foundation of China(Nos.51975175,51875158)。
文摘The fracture behavior at high temperatures of the Ti−22Al−26Nb alloy,which features duplex lamellar,bimodal,and Widmanstätten structures,was studied.Samples of the alloy were prepared through compression deformation in the trans-phase region followed by subsequent heat treatment.The results indicate that at 650℃,the fracture toughness of the Ti−22Al−26Nb alloy is increased by 41.7%compared to that with original microstructures.The content of the B2 phase significantly influences the inherent fracture toughness of the material,while the morphology and distribution of the precipitated phases primarily affect the tortuosity of the crack propagation path.Among the microstructural features,the morphology and geometric orientation of the lamellae most significantly impact the crack path;consequently,the Widmanstätten structure exhibits the most tortuous fracture path.Additionally,a predictive model for fracture toughness is developed,which effectively predicts the fracture toughness of Ti−22Al−26Nb alloys with various microstructures at 650℃.
基金Shenzhen Science and Technology Program(KJZD20230923113900001)Project of Industry and Information Technology Bureau of Shenzhen Municipality(201806071403422960)。
文摘The hot compression curves and deformed microstructures were investigated under various hot deformation conditions in three states:hot isostatic pressing(HIP,A1),HIP+hot extrusion at 1100℃(A2),and HIP+hot extrusion at 1150℃(A3).The results show that A2 sample,extruded at 1100℃ with uniform γ+γ′duplex microstructures,demonstrates excellent hot deformation behavior at both 1050 and 1100℃.The true stress-true strain curves of A2 sample maintain a hardening-softening equilibrium over a larger strain range,with post-deformation average grain size of 5μm.The as-HIPed A1 sample and 1150℃ extruded A3 sample exhibit a softening region in deformation curves at 1050℃,and the grain microstructures reflect an incomplete recrystallized state,i.e.combination of fine recrystallized grains and initial larger grains,characterized by a necklace-like microstructure.The predominant recrystallization mechanism for these samples is strain-induced boundary migration.At 1150℃ with a strain rate of 0.001 s^(-1),the influence of the initial microstructure on hot deformation behavior and resultant microstructure is relatively less pronounced,and postdeformation microstructures are fully recrystallized grains.Fine-grained microstructures are conducive to maximizing the hot deformation potential of alloy.By judiciously adjusting deformation regimes,a fine and uniform deformed microstructure can be obtained.
基金Natural Science Foundation of Shandong Province of China(ZR2023QE193)。
文摘The microstructures and mechanical properties of Al-8.3Zn-3.3Cu-2.2Mg alloys prepared via hot extrusion and liquid forging methods were investigated.Results show that based on DEFORM simulation analysis,the optimal hot extrusion parameters are determined as ingot initial temperature of 380°C and extrusion speed of 3 mm/s.The hot-extruded aluminum alloy after T6 heat treatment presents superior mechanical properties with yield strength of 519.6 MPa,ultimate tensile strength of 582.1 MPa,and elongation of 11.0%.Compared with the properties of gravity-cast and liquid-forged alloys,the yield strength of hot-extruded alloy increases by 30.8%and 4.9%,and the ultimate tensile strength improves by 43.5%and 10.2%,respectively.The significant improvement in tensile strength of the hot-extruded alloys is attributed to the elimination of casting defects and the refinement of matrix grain and eutectic phases.In addition,the hot-extruded alloy demonstrates superior plasticity compared with the liquid-forged alloy.This is because severe plastic deformation occurs during hot extrusion,which effectively breaks and disperses the eutectic phases,facilitating the dissolution and precipitation of the second phases and inhibiting the microcrack initiation.
基金supported by the National Natural Science Foundation of China(Nos.12072327,12302497)the National Outstanding Youth Science Fund Project(No.12125206)+2 种基金Major International Joint Research Project(No.W2411003)Fund raised by China Electric Power Research Institute(No.GC80-21-002)CAS Project for Young Scientists in Basic Research(YSBR-096).
文摘The development and deployment of aluminum conductor have been significantly hampered by the contradiction of yield strength,uniform elongation,and electrical conductivity.Herein,we successfully fabricated a pure aluminum(Al)clad aluminum alloy(AA)rod with hierarchical compositions and microstructures.The proposed pure Al clad AA rod showcases an optimized combination of yield strength,uniform elongation,and electrical conductivity,i.e.,easing the restriction on improving yield strength,uniform elongation,and electrical conductivity.Compared to existing experiments,uniform elongation improved fourfold,while yield strength increased by 13%and electrical conductivity improved by 2%in terms of the international annealed copper standard(IACS).Microstructural characterizations and theoretical analyses revealed that the optimal performance of the Al clad AA arose from low-density low-angle grain boundaries(LAGBs)in the outer Al and high-density LAGBs with nanoscale precipitations in the inner AA.Our findings offer a compelling strategy for fabricating high-performance aluminum conductors,thereby laying a solid technical foundation for their wide application in power delivery systems.
基金supported by the National Natural Science Foundation of China(No.52303394)the National Key Research and Development Program of China(No.2022YFB3705000)+1 种基金the Natural Science Foundation of Liaoning Province(No.2023-BS-015)the Science Center for Gas Turbine Project(No.P2022-C-IV-002-001).
文摘The effect of carbon content on the microstructures and stress rupture properties of a newly developed polycrystalline Ni-based superalloy with high Cr content has been studied.It was observed that both grain size and the number of carbides increased with an increase in carbon content.After heat treatment,granular M_(23)C_(6)carbides were dispersed around MC carbides along grain boundaries and inside grains.The quantity of granular M_(23)C_(6)carbides increased while their sizes decreased.These findings can be verified with the results of thermodynamic calculation and differential scanning calorimetry analysis.The stress rupture times(975℃/225 MPa)increased from 13.3 to 25.5 h with the carbon content increased from 0.1 to 0.2 wt.%.The improvement can be attributed to two primary factors.Firstly,grain boundary is typically weak region during deformation process and the grain size increased as carbon content increased in the alloy.Secondly,carbides act as hindrances to impede dislocation movement,leading to dislocation entanglement.As carbon content rose,the quantity of carbides in interdendritic regions and grain boundaries increased,providing a certain degree of strengthening effect and resulting in a longer stress rupture time.
基金supported by the National Natural Science Foundation of China(52061015,52371188)Young Talents Program of Jiangxi Provincial Major Discipline Academic and Technical Leaders Training Program(20212BCJ23008)+2 种基金Jiangxi Provincial Natural Science Foundation(20212BAB214018)Technology Program of Fujian Province(2021T3063)Jiangxi Province Key Laboratory of Magnetic Metallic Materials and Devices(2024SSY05061)。
文摘The effect of Ti addition on microstructures and magnetic properties of B-lean(Pr,Nd)_(31.1)Fe_(67.1-x)(CoCuGa)_(1.4)Ti_(x)B_(0.9)(wt%,x=0.0,0.1,0.2,0.3,0.4)sintered magnets were investigated.The remanence Bris slightly reduced due to the deteriorated orientation degree and the diminished volume fraction of main phase caused by the existence of rod-shaped Ti-B-rich phase.However,the HcJobviously increases from1145 kA/m for x=0.0 sample to 1515 kA/m for x=0.2 sample.The results demonstrate that the increments of coercivity for x=0.2 and x=0.0 samples after post-sinter annealing(PSA)are 62.9%and 20.6%,respectively.Rod-shaped Ti-B-rich phase forms after Ti doping,which leads to the existence of6:13:1 type RE-Fe-(Cu,Ga)phase with high Fe content at triple junctions.This is beneficial to the formation of continuous thin grain boundaries with low Fe content,which can weaken the exchange coupling interaction between adjacent grains,leading to the improved coercivity.
基金financial support by the National Natural Science Foundation of China(No.52474361)the Independent Research Project of State Key Laboratory of Advanced Special Steel,Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University(No.SKLASS 2023-Z01)the Science and Technology Commission of Shanghai Municipality(No.19DZ2270200).
文摘The fracture mechanisms of coarse-grained heat-affected zone(CGHAZ)for Mg and Mg–Ca deoxidized high-strength low-alloy(HSLA)steels after high heat input welding(HHIW)were investigated based on the microstructures,crack behaviors and mechanical properties.Compared to Mg–Ca steel,the proportion of intergranular acicular ferrites(IAFs)and polygonal ferrites(PFs)in Mg steel increases from 59.97%to 90.16%.The high-angle grain boundaries(HAGBs)and geometrically necessary dislocations density increase from 55.5%and 4.30×10^(14) m^(-2)to 70.4%and 5.48×10^(14) m^(–2),respectively,while effective grain size decreases from 9.46 to 8.12μm.The area fraction of radial zone in Mg steel decreases from 80.8%to 37.7%and cleavage plane is smaller with more curved and finer tearing ridges.The inclusions distributed at the center of cleavage planes and along river lines can serve as crack initiation sites.The zigzag pattern of primary crack propagation path has width of 476μm and the length of secondary cracks remains below 10μm.These cracks are deflected or arrested by IAFs,PFs and HAGBs,and tend to propagate along{110}plane family.These factors contribute to superior overall mechanical properties of Mg steel,especially increasing low-temperature impact toughness from 23 to 175 J.
基金supported by the General Program from the National Natural Science Foundation of China(NNSFC)(No.52371185)Central Government Guides Local Funds for Science and Technology Development(No.216Z1008G)the Natural Science Foundation of Hebei province,China(No.E2022202017).
文摘We proposed a new measure to optimize the comprehensive magnetic properties of SmCo_(5)alloy.By compounding Fe-15Ni-3Al-1Ti(FNAT)alloy with high saturation magnetization and Sm(Co,Cu)_(5) matrix alloy in the liquid state,an innovative two-phase separation microstructure or cellular microstructure is formed after melt-spinning using the phase separation effect of the two alloys.At the same time,the element concentration,relative phase content,and microstructure are adjusted by adding different contents of FNAT alloy.The results show that FNAT addition promotes the as-spun ribbons phase separation(or spinodal decomposition)into Co-rich SmCo_(5)-and Sm-Ni-rich CeCo_(5)-or Sm_(2)Co_(7)-type phases.Adding 3 wt.%FNAT increases the coercivity,saturation magnetization,and remanence of the ribbons by 320.6%,39.8%,and 82.8%,respectively.Adding 5 wt.%FNAT promotes forming the Sm_(2)(Co,M)_(7) cell-wall phase and increases the coercivity and remanence by 272.7%and 48.1%,respectively.Finally,the corresponding microstructure evolution models,magnetization,and demagnetization mechanisms are proposed.
基金supported by the Science and Technology Project of the Hebei Education Department(JZX2023004)the Research Program of Local Science and Technology Development under the Guidance of Central China(246Z1808G)the support from the“Yuanguang”Scholar Program of Hebei University of Technology.
文摘The Lithium-ion deintercalation induces a significant volume change in battery electrodes during charging and discharging processes,which in turn generates a large diffusion-induced stress(DIS).This stress can cause microstructural damage,consequently degrading battery performance.This work simplifies the particles making up the electrode into spheres and studies the impact of the surface microstructure on the distribution of diffusion-induced stress.A mechanical-chemical coupling model was established to study the DIS in secondary particles,which were constructed by adding convex particles to the ball-shaped particle surfaces of the electrode material.It is observed that an increase in the number of convex particles results in a higher concentration of lithium ions within the electrode material,along with the first principal stresses within the material particles.In addition,the convex particles increase the local stresses around the ball-shaped particle surface.Therefore,a round surface on the electrode material particles is beneficial for preventing potential fractures.
文摘Effects of intercritical annealing temperature on microstructures and mechanical properties of ultrahigh-strength dual-phase(DP) steel were investigated.Results reveal that the volume fraction of martensite increases as the intercritical annealing temperature increases.Under optimal annealing conditions, the DP steel exhibited a microstructure comprising nearly equiaxed ferrite with uniformly distributed martensite islands.Variations in micro-hardness, strength, elongation, and fracture mechanisms were closely linked to the corresponding microstructural features.
