In the domain of gas adsorption and separation,microporous materials have garnered considerable attention due to their elevated specific surface area and pore structure[1].And the dissolution of gases in liquids is li...In the domain of gas adsorption and separation,microporous materials have garnered considerable attention due to their elevated specific surface area and pore structure[1].And the dissolution of gases in liquids is limited by unstable liquid-phase pores and weak gas-liquid interactions,which leads to low solubility.However,conventional microporous materials are predominantly solid-state,which complicates their direct adsorption and separation application in liquid environments.展开更多
Lignin-derived hard carbon shows potential as an anode material for sodium-ion batteries(SIBs)due to its high carbon content and aromatic structure,but its limited reversible adsorption sites and low conductivity hind...Lignin-derived hard carbon shows potential as an anode material for sodium-ion batteries(SIBs)due to its high carbon content and aromatic structure,but its limited reversible adsorption sites and low conductivity hinder performance.This study introduces a self-activation strategy to optimize carbon layer stacking and surface functional groups in microporous carbon,significantly enhancing sodium storage capacity and rate performance.By utilizing oxygen-containing functional groups in organic solvent lignin,we induce micropore formation during pyrolysis,effectively regulating graphite domains and closed pores structures without disrupting carbon layer growth.Unstacked graphene layers serve as efficient electron transport channels and expose additional adsorption sites,simultaneously increasing sodium storage capacity and intrinsic conductivity.The resultant S-OLHC demonstrates a remarkable sodium storage capacity of 358 mA h/g at 0.05 A/g after 200 cycles and maintains 231 mA h/g after 1000 cycles at 2 A/g.This strategy eliminates the need for additional pore-forming agents,offering a simpler,more efficient,and environmentally friendly approach compared to traditional activation methods.This work advances the rational design of high-performance biomass-derived hard carbon for SIBs by leveraging inherent structural characteristics and provides a sustainable low-carbon strategy for lignin valorization in renewable energy storage.展开更多
Aqueous zinc-iodine batteries(AZIBs)have attracted significant attention as the most promising next-generation energy storage technology due to their low cost,inherent safety,and high energy density.However,their prac...Aqueous zinc-iodine batteries(AZIBs)have attracted significant attention as the most promising next-generation energy storage technology due to their low cost,inherent safety,and high energy density.However,their practical application is hindered by the poor electronic conductivity of iodine cathodes and the severe shuttling effect of intermediate polyiodides.Here,we report a novel micropores carbon framework(MCF)synthesized from waste coffee grounds via a facile carbonization-activation process.The resultant MCF features an ultrahigh specific surface area and a high density of micropores,which not only physically confine iodine species to minimize iodine loss but also enhance the electronic conductivity of the composite cathode.Furthermore,biomass-derived heteroatom dopings(nitrogen functionalities)facilitate effective chemical anchoring of polyiodide intermediates,thereby mitigating the shuttle effect.UV–visible spectroscopy and electrochemical kinetic analyses further confirm the rapid transformation and inhibition mechanism of iodine species by MCF.Consequently,the MCF/I_(2)cathode delivers superior specific capacities of 238.3 mA h g^(−1)at 0.2 A g^(−1)and maintains outstanding cycling performance with a capacity retention of 85.2%after 1200 cycles at 1.0 A g^(−1).This work not only provides an important reference for the design of high-performance iodine-host porous carbon materials but also explores new paths for the sustainable,high-value utilization of waste biomass resources.展开更多
Aim To develop a physical and mathematical model related to micropore para- meters of steady-state convective combustion of micropore propellants(MPP). Methods The micropore parameters were measured by WXT-88 mage ana...Aim To develop a physical and mathematical model related to micropore para- meters of steady-state convective combustion of micropore propellants(MPP). Methods The micropore parameters were measured by WXT-88 mage analysis apparatus and the convective combustion characteristic of MPP was measured by a large volume closed bomb, respectively. Rasults Statistical physical model of burning in the micropore and granular burning were developed. The burning rate equation of steady-state convective combustion of MPP was obtained. Conclusions This model correlates the convective burning rate with micropores para- meters for the first time,and the calculating values of convective burning rate are in agreement with test results.The model also can be used to estimate the effects of microporous parame- ters, basic mass burning rate, MPP density and pressure in combustion chamber on the convective combustion characteristics of MPP.展开更多
Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile pro...Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile properties.However,their use is limited by insufficient heat resistance and excessive dynamic heat generation under cyclic loading.In this study,star-shaped trifunctional polypropylene glycerol(PPG3)was incorporated into conventional poly(tetramethylene glycol)(PTMG)and 4,4'-methylenediphenyl diisocyanate(MDI)-based systems to construct microporous star-shaped casting polyurethanes(SCPU),with water serving as a green foaming agent.Unlike conventional small-molecule trifunctional crosslinkers that create junctions within hard segment domains,PPG3 introduces long flexible arms between the hard segments,anchoring the crosslinking points at its molecular core.The large steric hindrance of PPG3 effectively suppresses soft segment crystallization and lowers the degree of microphase separation,whereas the crosslinked network restricts chain mobility,thereby reducing dynamic heat generation.These structural features also enhance the heat resistance,yielding a softening temperature of 183℃,which is 30.9%higher than that of polyurethane without PPG3.When applied to airless tires by casting SCPU into rubber treads,the fabricated hybrid airless tires achieved a rolling distance of over 3000 km under a load of 65 kg at 25km/h without structural failure,satisfying practical performance requirements.This strategy offers a simple,solvent-free,and environmentally friendly process,underscoring the potential of SCPU for scalable production of high-performance airless tires.展开更多
High-quality steel production requires superior-performance refractories.To meet the requirements of quality enhancement and efficiency improvement in the steelmaking industry,the application of the novel microporous ...High-quality steel production requires superior-performance refractories.To meet the requirements of quality enhancement and efficiency improvement in the steelmaking industry,the application of the novel microporous magnesia with high strength,remarkable slag resistance,and excellent thermal insulation is promoted.The interface reaction between H13 steel and novel microporous magnesia castable was investigated by using the crucible method,to elucidate the molten steel purification mechanism.The interface microstructure was observed by scanning electron microscopy,and the composition,size,and amount of inclusions were statistically analyzed.A thermal calculation was conducted to gain a deeper understanding of the modification process of inclusions.Fused magnesia castables were used as the blank control.The results show that the average number density and size of inclusions were reduced by 5.99 mm^(−2) and 0.28μm respectively after the same reaction time because the micropores enhanced the inclusion adsorption.The size of inclusions caused by erosion decreased.Also,more[Mg]dissolved into molten steel over 60 min reaction time and resulted in a 0.49 wt.%increase in inclusion Mg content,which modified the inclusion by decreasing their melting point.Therefore,applying novel microporous magnesia was beneficial for purifying H13 steel.展开更多
As a potential adsorption material,it is still a challenge for activated carbon fiber(ACF)in efficient adsorption of ethanol due to its nonpolar surface,which is mainly emitted from the grain drying industry.This stud...As a potential adsorption material,it is still a challenge for activated carbon fiber(ACF)in efficient adsorption of ethanol due to its nonpolar surface,which is mainly emitted from the grain drying industry.This study prepared surface polarity-modified ACF using the heteroatom doping method.The modified ACF possessed a richer array of strongly polar oxygen/nitrogen-containing functional groups(primarily phenolic hydroxyl and lactone groups),a larger specific surface are1,and a more developed micropore structure.The adsorption capacities of ethanol for O-ACF and N-ACF were 4.110 mmol/g and 1.698 mmol/g,respectively,which were 11.3 times and 4.7 times those of unmodified ACF.This was a significant improvement over our previous work(0.363 mmol/g).The improvement of adsorption capacity for the N-ACF was mainly due to the higher specific surface are1,greater number of micropores(more adsorption sites)and abundant existence of defects,whereas,for O-ACF,the improvement mainly relied on the abundant presence of oxygen-containing functional groups on the surface.However,water had a negative effect on the adsorption of ethanol for the modified ACF due to competitive adsorption and the disappearance of capillary condensation.It was further revealed that the adsorption process of ethanol and water was quite different.It obeyed the linear driving force(LDF)model for ethanol adsorption,however,the intraparticle diffusion(IPD)model for water adsorption.展开更多
Micropores of shale are significant to the gas content and production potential of shale, which has been verified in the research of marine shale gas; while, few studies have been conducted on lacustrine shales. This ...Micropores of shale are significant to the gas content and production potential of shale, which has been verified in the research of marine shale gas; while, few studies have been conducted on lacustrine shales. This study collected 42 samples from three wells in the Late Cretaceous Qingshankou Formation of the southern Songliao Basin, NE China, and investigated these samples by the focused ion beam-scanning electron microscope(FIB–SEM) and nitrogen adsorption analysis techniques. Four types of micropores were identified in the samples, i.e., intergranular pore, intracellular pore, organic matter pore and microfracture. The pore structure type is characterized by open slit pores and "ink type" pores which are mainly 1.5–5 nm in diameter with mesopores as the main pores. The mesopores account for 74.01% of the pore volume and 54.68% of the pore surface area. Compared with the lacustrine shales from the Triassic Yanchang Formation in the Ordos Basin and Xujiahe Formation in the Sichuan Basin, the intergranular clay mineral interlayer pores are considered to be the main reservoir space for shale gas storage in the study area, followed by intraparticle pores, organic matter pores and microfractures. Maturity and micropore are the key controlling factors which affect the shale gas content of the Qingshankou Formation in southern Songliao Basin.展开更多
Conjugated microporous polymers have excellent skeleton structures but poor electrical conductivity limits their applications in microwave absorption.To solve this problem,a strategy of molecular expansion and confini...Conjugated microporous polymers have excellent skeleton structures but poor electrical conductivity limits their applications in microwave absorption.To solve this problem,a strategy of molecular expansion and confining polymerization is proposed in this work to synthesize conductive hyper-crosslinked conjugated microporous polymer.The topology of the conjugated microporous polymer is changed into a three-dimensional skeleton structure with high specific surface area by using molecular expansion technique,and the controlled growth of polypyrrole in the channel constructs a unique network structure.The balance of excellent composite backbone structure,proper conductivity,attenuation capability and impedance matching enable the material to exhibit electromagnetic wave absorption performance.As a result,with low filler loading of 10 wt%,a strongest reflection loss of-52.68 d B and a maximum effective bandwidth of 5.76 GHz.Additionally,CST simulations of the radar scattering cross section have been carried out to verify the excellent material properties.This study provides new concepts for new conductive polymers and broadens the application of hyper-crosslinked conjugated microporous polymer in the field of electromagnetic wave absorption.展开更多
Energy conversion technologies like fuel cells and metal-air batteries require oxygen reduction reaction(ORR)electrocatalysts with low cost and high catalytic activity.Herein,N-doped carbon spheres(N-CS)with rich micr...Energy conversion technologies like fuel cells and metal-air batteries require oxygen reduction reaction(ORR)electrocatalysts with low cost and high catalytic activity.Herein,N-doped carbon spheres(N-CS)with rich micropore structure have been synthesized by a facile two-step method,which includes the polymerization of pyrrole and formaldehyde and followed by a facile pyrolysis process.During the preparation,zinc chloride(ZnCl2)was utilized as a catalyst to promote polymerization and provide a hypersaline environment.In addition,the morphology,defect content and activity area of the resultant N-CS catalysts could be regulated by controlling the content of ZnCl2.The optimum N-CS-1 catalyst demonstrated much better catalytic activity and durability towards ORR in alkaline conditions than commercial 20 wt%Pt/C catalysts,of which the half-wave potential reached 0.844 V vs.RHE.When applied in the Zn-air batteries as cathode catalysts,N-CS-1 showed a maximum power density of 175 mW cm^(-2) and long-term discharging stability of over 150 h at 10 mA cm^(-2),which outperformed 20 wt%Pt/C.The excellent performance could be due to its ultrahigh specific surface area of 1757 m2 g1 and rich micropore channels structure.Meanwhile,this work provides an efficient method to synthesize an ultrahigh surface porous carbon material,especially for catalyst application.展开更多
To accurately analyze the impact of casting pores in steel,high-resolution 3D X-ray tomography technology was used to gather detailed statistical information about micropores.These micropores were classified as gas,sh...To accurately analyze the impact of casting pores in steel,high-resolution 3D X-ray tomography technology was used to gather detailed statistical information about micropores.These micropores were classified as gas,shrinkage,and gas-shrinkage pores depending on their formation origin and morphology.Clustering tendencies and affinity parameters were defined to characterize the spatial correlations among these three types of pores.The 3D data from X-ray tomography scans were then integrated into finite element analysis(FEA)software to predict how micropore shape,size,and distribution influence stress distribution within the material.The results show that certain inflection points with small local radii within the cast pores are major contributors to stress concentration.Therefore,cast pores cannot be simply modeled as ideal spherical pores.The sphericity and volume of pores have a significant impact on the stress concentration of the model.Specifically,lower sphericity and larger pore volumes result in higher stress concentrations.Moreover,the internal pores of steel castings exhibit specific global distribution characteristics.Pores located on the surface of the specimen lead to significantly higher stress concentrations compared to those located inside the specimen.展开更多
Preparing carbon nanosheets with precise control of open porous morphology via universal process and understanding the relationship between structure and capacitive performance are very urgent for achieving advanced s...Preparing carbon nanosheets with precise control of open porous morphology via universal process and understanding the relationship between structure and capacitive performance are very urgent for achieving advanced supercapacitors.Herein,we propose a simple yet effective additive-free method to transform a bulk layered potassium phthalimide salt to novel nitrogen-doped twodimensional carbon sheets by self-activation during calcination.The obtained samples showed large-sized and flat structure with lateral size around 10μm,uniform sub-nanometer micropore size distribution of about 0.65 nm dimension,large specific surface area up to 2276.7 m^(2)g^(-1),and suitable nitrogen doping.Benefited from these merits,the optimized sample delivers a high specific capacitance of 345 F g^(-1)at 1 A g^(-1)and retains 270 F g^(-1)even at 50 A g^(-1)in6.0 M KOH electrolyte.Remarkably,the symmetric supercapacitor shows maximum energy densities of 16.43 Wh kg^(-1)and 23.6 Wh kg^(-1)in 6.0 M KOH and 1.0 M Na_(2)SO_(4)electrolytes,respectively.Importantly,on account the universality and simplicity of this method,the undoped as-prepared carbon sheet with uniform sub-nanometer micropore distribution can be synthesized from different potassium-containing salts with layered structure,which can be employed as a model for a deep understanding the effect of sub-nanometer micropores on capacitive performances.We find the number of micropores centered at 0.65 nm can be applied as one indicator to clarify the correlation between capacitance and critical pore size below 1 nm.展开更多
Based on an equivalent medium approach, this paper presents a model describing the nonlinear propagation of acoustic waves in a viscoelastic medium containing cylindrical micropores. The influences of pores＇ nonlinea...Based on an equivalent medium approach, this paper presents a model describing the nonlinear propagation of acoustic waves in a viscoelastic medium containing cylindrical micropores. The influences of pores＇ nonlinear oscillations on sound attenuation, sound dispersion and an equivalent acoustic nonlinearity parameter are discussed. The calculated results show that the attenuation increases with an increasing volume fraction of micropores. The peak of sound velocity and attenuation occurs at the resonant frequency of the micropores while the peak of the equivalent acoustic nonlinearity parameter occurs at the half of the resonant frequency of the micropores. Furthermore, multiple scattering has been taken into account, which leads to a modification to the effective wave number in the equivalent medium approach. We find that these linear and nonlinear acoustic parameters need to be corrected when the volume fraction of micropores is larger than 0.1%.展开更多
A theory for calculating the electrostatic interaction between protein molecules and the wallof a liquid-filled micropore is established in terms of solving the Laplace and the linearPoisson-Boltzmann equations.The su...A theory for calculating the electrostatic interaction between protein molecules and the wallof a liquid-filled micropore is established in terms of solving the Laplace and the linearPoisson-Boltzmann equations.The surface charge of protein molecules is measured by theelectrophoresis velocity,whilethe charge of the pore wall is obtained by the ionic Donnan equilibrium.The theory is then used to study the influence of solute-pore electrostatic interaction on theconcentration partition of protein solution in a micropore under different solution properties.Experi-mental verification is performed by detecting the hindered diffusion of bovine serum albumin in thetrack-etched polycarbonate membranes.A good consistence between the theoretical and experimentaldata is being achieved.展开更多
The healing behavior of micropores in powder metallurgy （P/M） 316L stainless steel during hot forging and subsequent heat treatment was studied. The results showed that hot forging can improve the homogeneity of the...The healing behavior of micropores in powder metallurgy （P/M） 316L stainless steel during hot forging and subsequent heat treatment was studied. The results showed that hot forging can improve the homogeneity of the pore size and enhance the relative density of material in varying degree due to different forging temperatures. As a re- sult of deformation and diffusion bonding at high temperature, the irregular pores were spheroidized and finally turned into stable inner grain pores. The comparison of compression behavior between P/M and wrought dense mate rials has shown that the pores can either be the obstacles of dislocation movement or be the nucleation sites accelera- ting the reerystallization according to the difference of deformation temperatures.展开更多
Finite element （FE） analysis was employed to investigate the casting microcrack and micropore growth in nickel-base single-crystal superalloys DD3. Based on the finite deformation rate-dependent crystallographic con...Finite element （FE） analysis was employed to investigate the casting microcrack and micropore growth in nickel-base single-crystal superalloys DD3. Based on the finite deformation rate-dependent crystallographic constitutive equation, the simulations of casting microcrack and micropore growth in three-dimensional unit cell model were carried out in a range of parameters including stress triaxiality, Lode parameter and type of activated slip systems. The FE results show that the stress triaxiality has profound effects on growth behavior, and the Lode parameter is also important for the casting microcrack and micropore growth. The type of operative slip systems has remarkable effect on casting microcrack and micropore growth, so the life of single- crystal component is associated with the type of activated slip systems, which is related to Schmid factor and the number of activated slip systems. The growth comparison between microcrack and micropore reveals that when the material is subjected to large deformation, the growth rate of microcrack is faster than that of micropore, i.e. microcrack is more dangerous than micropore; the microcrack is easier to result in brittle fracture than micropore. The stress triaxiality and Lode parameter have strong influence on the growth of microcrack and micropore.展开更多
This paper describes an innovative method for the immobilization of acylase I, which was entrapped into the CA-CTA micropore membrane. The most suitable casting solutions proportion for immobilizing the enzyme was obt...This paper describes an innovative method for the immobilization of acylase I, which was entrapped into the CA-CTA micropore membrane. The most suitable casting solutions proportion for immobilizing the enzyme was obtained through orthogonal experiment. Properties of the enzyme membrane were investigated and compared with those of free enzyme and blank membrane. The thermal stability and pH stability of the enzyme inside the membrane were changed by immobilization. The optimum pH was found to be 6.0, which changes 1.0 unit compared with that of free acylase I. The optimum temperature was found to be about 90℃, which is higher than that of free acylase I (60℃). Experimental results showed that immobilization had effects on the kinetic parameters of acylase I.展开更多
The effect of thermal treatment of the hydroxyapatite powders on the micropore structure of porous biphasic calcium phosphate (BCP) granules was examined. The porous BCP granules could be attained through mixing and s...The effect of thermal treatment of the hydroxyapatite powders on the micropore structure of porous biphasic calcium phosphate (BCP) granules was examined. The porous BCP granules could be attained through mixing and sintering/fracturing thermally treated 60 wt% hydroxyapatite powders and calcined 40 wt% β-tricalcium phosphate powders. The observed Scanning electron microscopy (SEM) morphologies showed that the density of micropores (0.1 - 2.0 μm) including interconnected micropores of the porous BCP granules mixed with hydroxyapatite powders thermally treated at 900°C was significantly improved and the composite particles of porous BCP granules were homogeneously mixed and distributed. This result indicates that the particles of hydroxyapatite powders that have a tendency to agglomerate at a room temperature were well isolated and dispersed through thermal treatment processing before mixing with calcined β-tricalcium phosphate powders. The microstructural characterizations such as phase purity and composition of porous BCP granules were performed and verified by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) analysis.展开更多
In this work, four empirical models of statistical thickness, namely the models of Harkins and Jura, Hasley, Carbon Black and Jaroniec, were compared in order to determine the textural properties (external surface and...In this work, four empirical models of statistical thickness, namely the models of Harkins and Jura, Hasley, Carbon Black and Jaroniec, were compared in order to determine the textural properties (external surface and surface of micropores) of a clay concrete without molasses and clay concretes stabilized with 8%, 12% and 16% molasses. The results obtained show that Hasley’s model can be used to obtain the external surfaces. However, it does not allow the surface of the micropores to be obtained, and is not suitable for the case of simple clay concrete (without molasses) and for clay concretes stabilized with molasses. The Carbon Black, Jaroniec and Harkins and Jura models can be used for clay concrete and stabilized clay concrete. However, the Carbon Black model is the most relevant for clay concrete and the Harkins and Jura model is for molasses-stabilized clay concrete. These last two models augur well for future research.展开更多
Exploration of efficient and stable photocatalysts to mimic natural leaves for the conversion of atmospheric CO_(2)into hydrocarbons utilizing solar light is very important but remains a major challenge.Herein,we repo...Exploration of efficient and stable photocatalysts to mimic natural leaves for the conversion of atmospheric CO_(2)into hydrocarbons utilizing solar light is very important but remains a major challenge.Herein,we report the design of four novel metal-salen-incorporated conjugated microporous polymers as robust artificial leaves for photoreduction of atmospheric CO_(2)with gaseous water.Owing to the rich nitrogen and oxygen moieties in the polymeric frameworks,they show a maximum CO_(2)adsorption capacity of 46.1 cm3 g^(−1)and adsorption selectivity for CO_(2)/N_(2)of up to 82 at 273 K.Under air atmosphere and simulated solar light(100mWcm^(−2)),TEPT-Zn shows an excellent CO yield of 304.96μmol h^(−1)g^(−1)with a selectivity of approximately 100%,which represents one of the best results in terms of organic photocatalysts for gas-phase CO_(2)photoreduction so far.Furthermore,only small degradation in the CO yield is observed even after 120-h continuous illumination.More importantly,a good CO yield of 152.52μmol g^(−1)was achieved by directly exposing the photocatalytic reaction of TEPT-Zn in an outdoor environment for 3 h(25-28℃,52.3±7.9mWcm^(−2)).This work provides an avenue for the continued development of advanced polymers toward gas-phase photoconversion of CO_(2)from air.展开更多
基金support from the National Key R&D Program of China(2024YFE0101100)the National Natural Science Foundation of China(22305132,22475112,22365021)+2 种基金the Inner Mongolia Autonomous Region“Grassland Talents”Project(2024098)the Basic Research Expenses Supported under 45 Years Old of Inner Mongolia(23600-5233706)the Inner Mongolia Natural Science Foundation(2025LHMS02016).
文摘In the domain of gas adsorption and separation,microporous materials have garnered considerable attention due to their elevated specific surface area and pore structure[1].And the dissolution of gases in liquids is limited by unstable liquid-phase pores and weak gas-liquid interactions,which leads to low solubility.However,conventional microporous materials are predominantly solid-state,which complicates their direct adsorption and separation application in liquid environments.
基金supported by the National Natural Science Foundation of China(22278155,U23A6005)。
文摘Lignin-derived hard carbon shows potential as an anode material for sodium-ion batteries(SIBs)due to its high carbon content and aromatic structure,but its limited reversible adsorption sites and low conductivity hinder performance.This study introduces a self-activation strategy to optimize carbon layer stacking and surface functional groups in microporous carbon,significantly enhancing sodium storage capacity and rate performance.By utilizing oxygen-containing functional groups in organic solvent lignin,we induce micropore formation during pyrolysis,effectively regulating graphite domains and closed pores structures without disrupting carbon layer growth.Unstacked graphene layers serve as efficient electron transport channels and expose additional adsorption sites,simultaneously increasing sodium storage capacity and intrinsic conductivity.The resultant S-OLHC demonstrates a remarkable sodium storage capacity of 358 mA h/g at 0.05 A/g after 200 cycles and maintains 231 mA h/g after 1000 cycles at 2 A/g.This strategy eliminates the need for additional pore-forming agents,offering a simpler,more efficient,and environmentally friendly approach compared to traditional activation methods.This work advances the rational design of high-performance biomass-derived hard carbon for SIBs by leveraging inherent structural characteristics and provides a sustainable low-carbon strategy for lignin valorization in renewable energy storage.
基金financial support from the National Natural Science Foundation of China(U23B20166,U21A20289)International Joint Doctoral Education Fund of Beihang University+5 种基金Open Fund of Key Laboratory of Biodiversity and Environment on the Qinghai-Tibet Plateau,Ministry of Education(KLBE2024001)the Australian Research Council(ARC)through the Future Fellowship(FT210100298)Discovery Project(DP220100603)Linkage Project(LP210200504,LP220100088,LP230200897)Industrial Transformation Research Hub(IH240100009)schemesthe Australian Government through the Cooperative Research Centres Projects(CRCPXIII000077).
文摘Aqueous zinc-iodine batteries(AZIBs)have attracted significant attention as the most promising next-generation energy storage technology due to their low cost,inherent safety,and high energy density.However,their practical application is hindered by the poor electronic conductivity of iodine cathodes and the severe shuttling effect of intermediate polyiodides.Here,we report a novel micropores carbon framework(MCF)synthesized from waste coffee grounds via a facile carbonization-activation process.The resultant MCF features an ultrahigh specific surface area and a high density of micropores,which not only physically confine iodine species to minimize iodine loss but also enhance the electronic conductivity of the composite cathode.Furthermore,biomass-derived heteroatom dopings(nitrogen functionalities)facilitate effective chemical anchoring of polyiodide intermediates,thereby mitigating the shuttle effect.UV–visible spectroscopy and electrochemical kinetic analyses further confirm the rapid transformation and inhibition mechanism of iodine species by MCF.Consequently,the MCF/I_(2)cathode delivers superior specific capacities of 238.3 mA h g^(−1)at 0.2 A g^(−1)and maintains outstanding cycling performance with a capacity retention of 85.2%after 1200 cycles at 1.0 A g^(−1).This work not only provides an important reference for the design of high-performance iodine-host porous carbon materials but also explores new paths for the sustainable,high-value utilization of waste biomass resources.
文摘Aim To develop a physical and mathematical model related to micropore para- meters of steady-state convective combustion of micropore propellants(MPP). Methods The micropore parameters were measured by WXT-88 mage analysis apparatus and the convective combustion characteristic of MPP was measured by a large volume closed bomb, respectively. Rasults Statistical physical model of burning in the micropore and granular burning were developed. The burning rate equation of steady-state convective combustion of MPP was obtained. Conclusions This model correlates the convective burning rate with micropores para- meters for the first time,and the calculating values of convective burning rate are in agreement with test results.The model also can be used to estimate the effects of microporous parame- ters, basic mass burning rate, MPP density and pressure in combustion chamber on the convective combustion characteristics of MPP.
基金financially supported by the National Natural Science Foundation of China(No.52303063)Hubei Provincial Department of Education Guided Scientific Research Project(No.B2024056)。
文摘Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile properties.However,their use is limited by insufficient heat resistance and excessive dynamic heat generation under cyclic loading.In this study,star-shaped trifunctional polypropylene glycerol(PPG3)was incorporated into conventional poly(tetramethylene glycol)(PTMG)and 4,4'-methylenediphenyl diisocyanate(MDI)-based systems to construct microporous star-shaped casting polyurethanes(SCPU),with water serving as a green foaming agent.Unlike conventional small-molecule trifunctional crosslinkers that create junctions within hard segment domains,PPG3 introduces long flexible arms between the hard segments,anchoring the crosslinking points at its molecular core.The large steric hindrance of PPG3 effectively suppresses soft segment crystallization and lowers the degree of microphase separation,whereas the crosslinked network restricts chain mobility,thereby reducing dynamic heat generation.These structural features also enhance the heat resistance,yielding a softening temperature of 183℃,which is 30.9%higher than that of polyurethane without PPG3.When applied to airless tires by casting SCPU into rubber treads,the fabricated hybrid airless tires achieved a rolling distance of over 3000 km under a load of 65 kg at 25km/h without structural failure,satisfying practical performance requirements.This strategy offers a simple,solvent-free,and environmentally friendly process,underscoring the potential of SCPU for scalable production of high-performance airless tires.
基金support of this study by the National Natural Science Foundation of China(Grant Nos.U22A20173 and U21A2058).
文摘High-quality steel production requires superior-performance refractories.To meet the requirements of quality enhancement and efficiency improvement in the steelmaking industry,the application of the novel microporous magnesia with high strength,remarkable slag resistance,and excellent thermal insulation is promoted.The interface reaction between H13 steel and novel microporous magnesia castable was investigated by using the crucible method,to elucidate the molten steel purification mechanism.The interface microstructure was observed by scanning electron microscopy,and the composition,size,and amount of inclusions were statistically analyzed.A thermal calculation was conducted to gain a deeper understanding of the modification process of inclusions.Fused magnesia castables were used as the blank control.The results show that the average number density and size of inclusions were reduced by 5.99 mm^(−2) and 0.28μm respectively after the same reaction time because the micropores enhanced the inclusion adsorption.The size of inclusions caused by erosion decreased.Also,more[Mg]dissolved into molten steel over 60 min reaction time and resulted in a 0.49 wt.%increase in inclusion Mg content,which modified the inclusion by decreasing their melting point.Therefore,applying novel microporous magnesia was beneficial for purifying H13 steel.
基金supported by the National Key R&D Program of China(Nos.2022YFB4101500 and 2022YFE0209500)the National Natural Science Foundation of China(Nos.22276191 and 21976177)the Qinghai Province Air Pollution Assessment and Fine Management Support Project,and the University of Chinese Academy of Science.
文摘As a potential adsorption material,it is still a challenge for activated carbon fiber(ACF)in efficient adsorption of ethanol due to its nonpolar surface,which is mainly emitted from the grain drying industry.This study prepared surface polarity-modified ACF using the heteroatom doping method.The modified ACF possessed a richer array of strongly polar oxygen/nitrogen-containing functional groups(primarily phenolic hydroxyl and lactone groups),a larger specific surface are1,and a more developed micropore structure.The adsorption capacities of ethanol for O-ACF and N-ACF were 4.110 mmol/g and 1.698 mmol/g,respectively,which were 11.3 times and 4.7 times those of unmodified ACF.This was a significant improvement over our previous work(0.363 mmol/g).The improvement of adsorption capacity for the N-ACF was mainly due to the higher specific surface are1,greater number of micropores(more adsorption sites)and abundant existence of defects,whereas,for O-ACF,the improvement mainly relied on the abundant presence of oxygen-containing functional groups on the surface.However,water had a negative effect on the adsorption of ethanol for the modified ACF due to competitive adsorption and the disappearance of capillary condensation.It was further revealed that the adsorption process of ethanol and water was quite different.It obeyed the linear driving force(LDF)model for ethanol adsorption,however,the intraparticle diffusion(IPD)model for water adsorption.
基金financially supported by the National Natural Science Foundation of China (grant No. 41702171)a National Science and Technology Major Project (grant No. 2016ZX05034002)
文摘Micropores of shale are significant to the gas content and production potential of shale, which has been verified in the research of marine shale gas; while, few studies have been conducted on lacustrine shales. This study collected 42 samples from three wells in the Late Cretaceous Qingshankou Formation of the southern Songliao Basin, NE China, and investigated these samples by the focused ion beam-scanning electron microscope(FIB–SEM) and nitrogen adsorption analysis techniques. Four types of micropores were identified in the samples, i.e., intergranular pore, intracellular pore, organic matter pore and microfracture. The pore structure type is characterized by open slit pores and "ink type" pores which are mainly 1.5–5 nm in diameter with mesopores as the main pores. The mesopores account for 74.01% of the pore volume and 54.68% of the pore surface area. Compared with the lacustrine shales from the Triassic Yanchang Formation in the Ordos Basin and Xujiahe Formation in the Sichuan Basin, the intergranular clay mineral interlayer pores are considered to be the main reservoir space for shale gas storage in the study area, followed by intraparticle pores, organic matter pores and microfractures. Maturity and micropore are the key controlling factors which affect the shale gas content of the Qingshankou Formation in southern Songliao Basin.
基金financially supported by the National Natural Science Foundation of China(No.52273267)the Fundamental Research Funds for the Central Universities(Nos.30920041102 and 30920021107)。
文摘Conjugated microporous polymers have excellent skeleton structures but poor electrical conductivity limits their applications in microwave absorption.To solve this problem,a strategy of molecular expansion and confining polymerization is proposed in this work to synthesize conductive hyper-crosslinked conjugated microporous polymer.The topology of the conjugated microporous polymer is changed into a three-dimensional skeleton structure with high specific surface area by using molecular expansion technique,and the controlled growth of polypyrrole in the channel constructs a unique network structure.The balance of excellent composite backbone structure,proper conductivity,attenuation capability and impedance matching enable the material to exhibit electromagnetic wave absorption performance.As a result,with low filler loading of 10 wt%,a strongest reflection loss of-52.68 d B and a maximum effective bandwidth of 5.76 GHz.Additionally,CST simulations of the radar scattering cross section have been carried out to verify the excellent material properties.This study provides new concepts for new conductive polymers and broadens the application of hyper-crosslinked conjugated microporous polymer in the field of electromagnetic wave absorption.
基金financially supported by the National Key R&D Program of China (No. 2018YFB0104000 and No. 2019YFA0210300)National Nature Science Foundation of China (No.21571189 and No.21671200)+3 种基金Natural Science Foundation of Jiangsu Province (BK20200991)Hunan Provincial Science and Technology Plan Project of China (No. 2019GK2033, No. 2017TP1001, CPS2019K06 and No. 2018RS3009)Postdoctoral International Exchange Program Funding of China (No. [2018]115)China Postdoctoral Science Foundation (2019M652802)
文摘Energy conversion technologies like fuel cells and metal-air batteries require oxygen reduction reaction(ORR)electrocatalysts with low cost and high catalytic activity.Herein,N-doped carbon spheres(N-CS)with rich micropore structure have been synthesized by a facile two-step method,which includes the polymerization of pyrrole and formaldehyde and followed by a facile pyrolysis process.During the preparation,zinc chloride(ZnCl2)was utilized as a catalyst to promote polymerization and provide a hypersaline environment.In addition,the morphology,defect content and activity area of the resultant N-CS catalysts could be regulated by controlling the content of ZnCl2.The optimum N-CS-1 catalyst demonstrated much better catalytic activity and durability towards ORR in alkaline conditions than commercial 20 wt%Pt/C catalysts,of which the half-wave potential reached 0.844 V vs.RHE.When applied in the Zn-air batteries as cathode catalysts,N-CS-1 showed a maximum power density of 175 mW cm^(-2) and long-term discharging stability of over 150 h at 10 mA cm^(-2),which outperformed 20 wt%Pt/C.The excellent performance could be due to its ultrahigh specific surface area of 1757 m2 g1 and rich micropore channels structure.Meanwhile,this work provides an efficient method to synthesize an ultrahigh surface porous carbon material,especially for catalyst application.
基金The National Natural Science Foundation of China(No.51578137).
文摘To accurately analyze the impact of casting pores in steel,high-resolution 3D X-ray tomography technology was used to gather detailed statistical information about micropores.These micropores were classified as gas,shrinkage,and gas-shrinkage pores depending on their formation origin and morphology.Clustering tendencies and affinity parameters were defined to characterize the spatial correlations among these three types of pores.The 3D data from X-ray tomography scans were then integrated into finite element analysis(FEA)software to predict how micropore shape,size,and distribution influence stress distribution within the material.The results show that certain inflection points with small local radii within the cast pores are major contributors to stress concentration.Therefore,cast pores cannot be simply modeled as ideal spherical pores.The sphericity and volume of pores have a significant impact on the stress concentration of the model.Specifically,lower sphericity and larger pore volumes result in higher stress concentrations.Moreover,the internal pores of steel castings exhibit specific global distribution characteristics.Pores located on the surface of the specimen lead to significantly higher stress concentrations compared to those located inside the specimen.
基金support from the National Natural Science Foundation of China(Grant No.21905220,51772240,21503158 and Distinguished Youth Scientist Program of 51425301)the Key Research and Development Plan of Shanxi Province(China,Grant No.2018ZDXM-GY-135)+3 种基金the Fundamental Research Funds for“Young Talent Support Plan”of Xi’an Jiaotong University(HG6J003)“1000-Plan program”of Shanxi ProvinceSanyo Chem.Co.Ltdthe grant from Shaanxi Joint Laboratory of Graphene(NPU)
文摘Preparing carbon nanosheets with precise control of open porous morphology via universal process and understanding the relationship between structure and capacitive performance are very urgent for achieving advanced supercapacitors.Herein,we propose a simple yet effective additive-free method to transform a bulk layered potassium phthalimide salt to novel nitrogen-doped twodimensional carbon sheets by self-activation during calcination.The obtained samples showed large-sized and flat structure with lateral size around 10μm,uniform sub-nanometer micropore size distribution of about 0.65 nm dimension,large specific surface area up to 2276.7 m^(2)g^(-1),and suitable nitrogen doping.Benefited from these merits,the optimized sample delivers a high specific capacitance of 345 F g^(-1)at 1 A g^(-1)and retains 270 F g^(-1)even at 50 A g^(-1)in6.0 M KOH electrolyte.Remarkably,the symmetric supercapacitor shows maximum energy densities of 16.43 Wh kg^(-1)and 23.6 Wh kg^(-1)in 6.0 M KOH and 1.0 M Na_(2)SO_(4)electrolytes,respectively.Importantly,on account the universality and simplicity of this method,the undoped as-prepared carbon sheet with uniform sub-nanometer micropore distribution can be synthesized from different potassium-containing salts with layered structure,which can be employed as a model for a deep understanding the effect of sub-nanometer micropores on capacitive performances.We find the number of micropores centered at 0.65 nm can be applied as one indicator to clarify the correlation between capacitance and critical pore size below 1 nm.
基金supported by the National Natural Science Foundation of China (Grant No 10674066)State Key Laboratory of Acoustics (Grant No 200802)
文摘Based on an equivalent medium approach, this paper presents a model describing the nonlinear propagation of acoustic waves in a viscoelastic medium containing cylindrical micropores. The influences of pores＇ nonlinear oscillations on sound attenuation, sound dispersion and an equivalent acoustic nonlinearity parameter are discussed. The calculated results show that the attenuation increases with an increasing volume fraction of micropores. The peak of sound velocity and attenuation occurs at the resonant frequency of the micropores while the peak of the equivalent acoustic nonlinearity parameter occurs at the half of the resonant frequency of the micropores. Furthermore, multiple scattering has been taken into account, which leads to a modification to the effective wave number in the equivalent medium approach. We find that these linear and nonlinear acoustic parameters need to be corrected when the volume fraction of micropores is larger than 0.1%.
基金Supported by the National Natural Science Foundation of China
文摘A theory for calculating the electrostatic interaction between protein molecules and the wallof a liquid-filled micropore is established in terms of solving the Laplace and the linearPoisson-Boltzmann equations.The surface charge of protein molecules is measured by theelectrophoresis velocity,whilethe charge of the pore wall is obtained by the ionic Donnan equilibrium.The theory is then used to study the influence of solute-pore electrostatic interaction on theconcentration partition of protein solution in a micropore under different solution properties.Experi-mental verification is performed by detecting the hindered diffusion of bovine serum albumin in thetrack-etched polycarbonate membranes.A good consistence between the theoretical and experimentaldata is being achieved.
基金Item Sponsored by National Basic Research Program of China(2012CB619600)
文摘The healing behavior of micropores in powder metallurgy （P/M） 316L stainless steel during hot forging and subsequent heat treatment was studied. The results showed that hot forging can improve the homogeneity of the pore size and enhance the relative density of material in varying degree due to different forging temperatures. As a re- sult of deformation and diffusion bonding at high temperature, the irregular pores were spheroidized and finally turned into stable inner grain pores. The comparison of compression behavior between P/M and wrought dense mate rials has shown that the pores can either be the obstacles of dislocation movement or be the nucleation sites accelera- ting the reerystallization according to the difference of deformation temperatures.
基金This work was supported by the Postdoctoral Science Foundation of China under Grant No.2004035688.
文摘Finite element （FE） analysis was employed to investigate the casting microcrack and micropore growth in nickel-base single-crystal superalloys DD3. Based on the finite deformation rate-dependent crystallographic constitutive equation, the simulations of casting microcrack and micropore growth in three-dimensional unit cell model were carried out in a range of parameters including stress triaxiality, Lode parameter and type of activated slip systems. The FE results show that the stress triaxiality has profound effects on growth behavior, and the Lode parameter is also important for the casting microcrack and micropore growth. The type of operative slip systems has remarkable effect on casting microcrack and micropore growth, so the life of single- crystal component is associated with the type of activated slip systems, which is related to Schmid factor and the number of activated slip systems. The growth comparison between microcrack and micropore reveals that when the material is subjected to large deformation, the growth rate of microcrack is faster than that of micropore, i.e. microcrack is more dangerous than micropore; the microcrack is easier to result in brittle fracture than micropore. The stress triaxiality and Lode parameter have strong influence on the growth of microcrack and micropore.
文摘This paper describes an innovative method for the immobilization of acylase I, which was entrapped into the CA-CTA micropore membrane. The most suitable casting solutions proportion for immobilizing the enzyme was obtained through orthogonal experiment. Properties of the enzyme membrane were investigated and compared with those of free enzyme and blank membrane. The thermal stability and pH stability of the enzyme inside the membrane were changed by immobilization. The optimum pH was found to be 6.0, which changes 1.0 unit compared with that of free acylase I. The optimum temperature was found to be about 90℃, which is higher than that of free acylase I (60℃). Experimental results showed that immobilization had effects on the kinetic parameters of acylase I.
文摘The effect of thermal treatment of the hydroxyapatite powders on the micropore structure of porous biphasic calcium phosphate (BCP) granules was examined. The porous BCP granules could be attained through mixing and sintering/fracturing thermally treated 60 wt% hydroxyapatite powders and calcined 40 wt% β-tricalcium phosphate powders. The observed Scanning electron microscopy (SEM) morphologies showed that the density of micropores (0.1 - 2.0 μm) including interconnected micropores of the porous BCP granules mixed with hydroxyapatite powders thermally treated at 900°C was significantly improved and the composite particles of porous BCP granules were homogeneously mixed and distributed. This result indicates that the particles of hydroxyapatite powders that have a tendency to agglomerate at a room temperature were well isolated and dispersed through thermal treatment processing before mixing with calcined β-tricalcium phosphate powders. The microstructural characterizations such as phase purity and composition of porous BCP granules were performed and verified by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) analysis.
文摘In this work, four empirical models of statistical thickness, namely the models of Harkins and Jura, Hasley, Carbon Black and Jaroniec, were compared in order to determine the textural properties (external surface and surface of micropores) of a clay concrete without molasses and clay concretes stabilized with 8%, 12% and 16% molasses. The results obtained show that Hasley’s model can be used to obtain the external surfaces. However, it does not allow the surface of the micropores to be obtained, and is not suitable for the case of simple clay concrete (without molasses) and for clay concretes stabilized with molasses. The Carbon Black, Jaroniec and Harkins and Jura models can be used for clay concrete and stabilized clay concrete. However, the Carbon Black model is the most relevant for clay concrete and the Harkins and Jura model is for molasses-stabilized clay concrete. These last two models augur well for future research.
基金Research Foundation for Advanced Talents of East China University of Technology,Grant/Award Number:DHBK201927Excellent Youth Foundation of Jiangxi Scientific Committee,Grant/Award Number:20232ACB213012+2 种基金National Science Foundation for Young Scientists of China,Grant/Award Number:21905122National Science Foundation for Young Scientists,Grant/Award Number:21905147Jiangxi Talent Program,Grant/Award Number:DHSQT32022005.
文摘Exploration of efficient and stable photocatalysts to mimic natural leaves for the conversion of atmospheric CO_(2)into hydrocarbons utilizing solar light is very important but remains a major challenge.Herein,we report the design of four novel metal-salen-incorporated conjugated microporous polymers as robust artificial leaves for photoreduction of atmospheric CO_(2)with gaseous water.Owing to the rich nitrogen and oxygen moieties in the polymeric frameworks,they show a maximum CO_(2)adsorption capacity of 46.1 cm3 g^(−1)and adsorption selectivity for CO_(2)/N_(2)of up to 82 at 273 K.Under air atmosphere and simulated solar light(100mWcm^(−2)),TEPT-Zn shows an excellent CO yield of 304.96μmol h^(−1)g^(−1)with a selectivity of approximately 100%,which represents one of the best results in terms of organic photocatalysts for gas-phase CO_(2)photoreduction so far.Furthermore,only small degradation in the CO yield is observed even after 120-h continuous illumination.More importantly,a good CO yield of 152.52μmol g^(−1)was achieved by directly exposing the photocatalytic reaction of TEPT-Zn in an outdoor environment for 3 h(25-28℃,52.3±7.9mWcm^(−2)).This work provides an avenue for the continued development of advanced polymers toward gas-phase photoconversion of CO_(2)from air.
