Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor m...Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor micro-LED displays.However,the impact of solvent on both the printing process and the morphology of SIJ-printed PNC color conversion microstructures remains underexplored.In this study,we prepared samples of CsPbBr3PNC colloid inks in various solvents and investigated the solvent's impact on SIJ printed PNC microstructures.Our findings reveal that the boiling point of the solvent is crucial to the SIJ printing process of PNC colloid inks.Only does the boiling point of the solvent fall in the optimal range,the regular positioned,micron-scaled,conical PNC microstructures can be successfully printed.Below this optimal range,the ink is unable to be ejected from the nozzle;while above this range,irregular positioned microstructures with nanoscale height and coffee-ring-like morphology are produced.Based on these observations,high-resolution color conversion PNC microstructures were effectively prepared using SIJ printing of PNC colloid ink dispersed in dimethylbenzene solvent.展开更多
Micro-light-emitting diodes(micro-LEDs)with outstanding performance are promising candidates for next-generation displays.To achieve the application of high-resolution displays such as meta-displays,virtual reality,an...Micro-light-emitting diodes(micro-LEDs)with outstanding performance are promising candidates for next-generation displays.To achieve the application of high-resolution displays such as meta-displays,virtual reality,and wearable electronics,the size of LEDs must be reduced to the micro-scale.Thus,traditional technology cannot meet the demand during the processing of micro-LEDs.Recently,lasers with short-duration pulses have attracted attention because of their unique advantages during micro-LED processing such as noncontact processing,adjustable energy and speed of the laser beam,no cutting force acting on the devices,high efficiency,and low cost.Herein,we review the techniques and principles of laser-based technologies for micro-LED displays,including chip dicing,geometry shaping,annealing,laserassisted bonding,laser lift-off,defect detection,laser repair,mass transfer,and optimization of quantum dot color conversion films.Moreover,the future prospects and challenges of laser-based techniques for micro-LED displays are discussed.展开更多
Micro-light-emitting diodes(micro-LEDs)have emerged as a promising display technology featuring high resolution,wide color gamut,high contrast,flexibility,and long lifetime.However,there are severe challenges in full-...Micro-light-emitting diodes(micro-LEDs)have emerged as a promising display technology featuring high resolution,wide color gamut,high contrast,flexibility,and long lifetime.However,there are severe challenges in full-color micro-LED,such as low efficiencies of red and green micro-LEDs,complex driving circuits for three-color micro-LEDs,and challenging mass transfer.Thus,converting blue light into red and green light by coupling color converters with blue LEDs is a reasonable strategy.Colloidal quantum dots(QDs)are an optimal candidate for color converters due to their high photoluminescence quantum yield,narrow emission peaks,small particle sizes,and solution processibility.Therefore,fullcolor micro-LEDs based on quantum dot color converters are attracting increasing attention.This review introduces micro-LED technology and the research progress of the full-color realization,and describes the associated technical challenges.Furthermore,it outlines the properties of QDs,patterning techniques,integration with micro-LEDs for achieving full color,and finally analyzes the challenges of applying QDs to micro-LEDs,demonstrating the application potential of QDs in achieving full-color of micro-LEDs,along with prospects for addressing current challenges.展开更多
High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental sta...High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy consumption.However,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron scale.Here,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand exchange.This strategy enabled us to achieve ultra-high resolution efficiently(line width<4μm,the best resolution for reported inorganic electrochromic materials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(<1 s at 0 V),high coloration efficiency(119.5 cm^(2) C^(−1)),good optical modulation(55.9%),and durability(>3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,etc.The success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.展开更多
Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—red...Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—reduces power consumption but is hindered by image flicker.While negative dielectric anisotropy liquid crystals(nLCs)mitigate flicker,their high driving voltages and production costs limit adoption.Positive dielectric anisotropy liquid crystals(pLCs)offer lower operating voltages,faster response times,and broader applicability,making them a more viable alternative.This study introduces a novel approach to minimizing flexoelectric effects in pLCs by investigating how single components influence flexoelectric behavior in mixtures through an effective experimental methodology.Two innovative measurement techniques—(1)flexoelectric coefficient difference analysis and(2)displacement-current measurement(DCM)—are presented,marking the first application of DCM for verifying flexoelectric effects.The proposed system eliminates uncertainties associated with previous methods,providing a reliable framework for selecting liquid crystal components with minimal flexoelectric effects while preserving key electro-optic properties.Given pLCs'higher reliability,lower production costs,and broader material selection,these advancements hold significant potential for low-power displays.We believe this work enhances flexoelectric analysis in nematic liquid crystals and contributes to sustainable innovation in the display industry,aligning with global energy-saving goals.展开更多
In recent years,artificial intelligence(AI)has demonstrated immense potential in driving breakthroughs in the semiconductor industry,particularly in full-color display technologies.Benefiting from the deep integration...In recent years,artificial intelligence(AI)has demonstrated immense potential in driving breakthroughs in the semiconductor industry,particularly in full-color display technologies.Benefiting from the deep integration of AI,these technologies are experiencing unprecedented innovation and industrial transformation,garnering significant attention.These advancements provide a solid foundation for displays with higher color gamut and resolution.In addition,the integration of deep learning with dimming technologies has enabled new display systems to deliver superior viewing experiences with reduced energy consumption.This review highlights recent progress in four key areas of AI application in full-color display technologies:epitaxial structure design,defect detection and repair,perovskite synthesis,and dynamic dimming.AI-driven advancements in these domains are paving the way for smarter,more efficient display technologies.By leveraging AI’s powerful data processing and optimization capabilities,full-color display systems are poised to achieve enhanced performance,energy efficiency,and user satisfaction,marking a significant step toward a more intelligent and innovative future.展开更多
Flexible electrochromic devices(FECDs)demonstrate significant potential for applications in wearable elec-tronics,military camouflage,and flexible smart displays.As a crucial electrochromic material,poly(3,4-ethylened...Flexible electrochromic devices(FECDs)demonstrate significant potential for applications in wearable elec-tronics,military camouflage,and flexible smart displays.As a crucial electrochromic material,poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS)is widely used in FECDs due to its excellent mechanical flexibility,tunable conductivity,and non-toxicity.However,the manufacturing process for patterned PEDOT:PSS electrochromic devices remains intricate,costly,and challenging to personalize.To address this challenge,we have developed a 3D-printable ink with controllable rheological properties through a concentration-tuning strategy,enabling programmable,patterned printing of PEDOT-based conductive polymer electrochromic layers.The 3D-printed FECDs exhibit outstanding electrochromic performance,including a high optical contrast(up to 47.9%at 635 nm),fast response times(t_(c)=1.6 s;t_(b)=0.6 s),high coloration efficiency(352 cm^(2) C^(-1)),and good cycling stability(with only a 9.3%decrease in optical contrast after 100 electrochemical cycles).Finally,we utilize 3D printing technology to construct flexible,patterned PEDOT:PSS electrochromic devices with bespoke butterfly designs.This work establishes the theoretical foundation for the application of 3D printing technology in PEDOT:PSS flexible electrochromic devices.展开更多
Micro-light emitting diode(micro-LED)is an emerging display technology with excellent performance of high contrast,low power consumption,long lifetime,and fast response time compared with the current display(e.g.,liqu...Micro-light emitting diode(micro-LED)is an emerging display technology with excellent performance of high contrast,low power consumption,long lifetime,and fast response time compared with the current display(e.g.,liquid crystal and organic LED(OLED)).With technological advantages,micro-LED holds promise to be widely applied in augmented reality(AR),flexible screens,etc.and is thus regarded as the next generation of display technology.In the process flow of micro-LED,the step known as mass transfer that requires transferring millions of micro-LEDs from a growth substrate to a display plane,is one of the key challenges limiting the commercialization of micro-LED from laboratory.Worldwide academic and industrial efforts have been devoted to developing mass transfer strategies with purposes of improving yield and reducing cost.Herein we review three main categories of mass transfer technologies for micro-LED display(pick-and-place,fluid self-assembly and laser-enabled advanced placement)and the coupled detection and repair technologies after transfer.Discussions and comparisons have been provided about the underlying general principle,history,and representative parties,advantages,and disadvantages(yield/efficiency/cost)of these technologies.We further envision the application prospect of these transfer technologies and the promise of the future display of micro-LED.展开更多
基金supported by the National Natural Science Foundation of China(No.62374142)Fundamental Research Funds for the Central Universities(Nos.20720220085 and 20720240064)+2 种基金External Cooperation Program of Fujian(No.2022I0004)Major Science and Technology Project of Xiamen in China(No.3502Z20191015)Xiamen Natural Science Foundation Youth Project(No.3502Z202471002)。
文摘Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor micro-LED displays.However,the impact of solvent on both the printing process and the morphology of SIJ-printed PNC color conversion microstructures remains underexplored.In this study,we prepared samples of CsPbBr3PNC colloid inks in various solvents and investigated the solvent's impact on SIJ printed PNC microstructures.Our findings reveal that the boiling point of the solvent is crucial to the SIJ printing process of PNC colloid inks.Only does the boiling point of the solvent fall in the optimal range,the regular positioned,micron-scaled,conical PNC microstructures can be successfully printed.Below this optimal range,the ink is unable to be ejected from the nozzle;while above this range,irregular positioned microstructures with nanoscale height and coffee-ring-like morphology are produced.Based on these observations,high-resolution color conversion PNC microstructures were effectively prepared using SIJ printing of PNC colloid ink dispersed in dimethylbenzene solvent.
基金supports from National Natural Science Foundation of China (62274138,11904302)Natural Science Foundation of Fujian Province of China (2023J06012)+2 种基金Science and Technology Plan Project in Fujian Province of China (2021H0011)Fujian Province Central Guidance Local Science and Technology Development Fund Project In 2022 (2022L3058)Compound semiconductor technology Collaborative Innovation Platform project of FuXiaQuan National Independent Innovation Demonstration Zone (3502ZCQXT2022005)。
文摘Micro-light-emitting diodes(micro-LEDs)with outstanding performance are promising candidates for next-generation displays.To achieve the application of high-resolution displays such as meta-displays,virtual reality,and wearable electronics,the size of LEDs must be reduced to the micro-scale.Thus,traditional technology cannot meet the demand during the processing of micro-LEDs.Recently,lasers with short-duration pulses have attracted attention because of their unique advantages during micro-LED processing such as noncontact processing,adjustable energy and speed of the laser beam,no cutting force acting on the devices,high efficiency,and low cost.Herein,we review the techniques and principles of laser-based technologies for micro-LED displays,including chip dicing,geometry shaping,annealing,laserassisted bonding,laser lift-off,defect detection,laser repair,mass transfer,and optimization of quantum dot color conversion films.Moreover,the future prospects and challenges of laser-based techniques for micro-LED displays are discussed.
基金supported by the National Key R&D Program of China(No.2021YFA0715502)the National Natural Science Foundation of China(No.62475084).
文摘Micro-light-emitting diodes(micro-LEDs)have emerged as a promising display technology featuring high resolution,wide color gamut,high contrast,flexibility,and long lifetime.However,there are severe challenges in full-color micro-LED,such as low efficiencies of red and green micro-LEDs,complex driving circuits for three-color micro-LEDs,and challenging mass transfer.Thus,converting blue light into red and green light by coupling color converters with blue LEDs is a reasonable strategy.Colloidal quantum dots(QDs)are an optimal candidate for color converters due to their high photoluminescence quantum yield,narrow emission peaks,small particle sizes,and solution processibility.Therefore,fullcolor micro-LEDs based on quantum dot color converters are attracting increasing attention.This review introduces micro-LED technology and the research progress of the full-color realization,and describes the associated technical challenges.Furthermore,it outlines the properties of QDs,patterning techniques,integration with micro-LEDs for achieving full color,and finally analyzes the challenges of applying QDs to micro-LEDs,demonstrating the application potential of QDs in achieving full-color of micro-LEDs,along with prospects for addressing current challenges.
基金supported by the National Key R&D Program of China(2022YFB3606501,2022YFB3602902)the Key projects of National Natural Science Foundation of China(62234004)+8 种基金the National Natural Science Foundation of China(U23A2092)Pioneer and Leading Goose R&D Program of Zhejiang(2024C01191,2024C01092)Innovation and Entrepreneurship Team of Zhejiang Province(2021R01003)Ningbo Key Technologies R&D Program(2022Z085),Ningbo 3315 Programme(2020A-01-B)YONGJIANG Talent Introduction Programme(2021A-038-B,2021A-159-G)“Innovation Yongjiang 2035”Key R&D Programme(2024Z146)Ningbo JiangBei District public welfare science and technology project(2022C07)the China National Postdoctoral Program for Innovative Talents(grant no.BX20240391)the China Postdoctoral Science Foundation(grant no.2023M743623).
文摘High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy consumption.However,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron scale.Here,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand exchange.This strategy enabled us to achieve ultra-high resolution efficiently(line width<4μm,the best resolution for reported inorganic electrochromic materials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(<1 s at 0 V),high coloration efficiency(119.5 cm^(2) C^(−1)),good optical modulation(55.9%),and durability(>3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,etc.The success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.
基金supported by Basic Science Research Program through the National Research Foundation(NRF)of Korea,funded by the Ministry of Science and ICT(MSIT),Korea[2022R1A2C2091671]by ITECH R&D Program of MOTIE/KEIT(Ministry of Trade,Industry&Energy/Korea Evaluation Institute of Industrial Technology)[20016808].
文摘Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—reduces power consumption but is hindered by image flicker.While negative dielectric anisotropy liquid crystals(nLCs)mitigate flicker,their high driving voltages and production costs limit adoption.Positive dielectric anisotropy liquid crystals(pLCs)offer lower operating voltages,faster response times,and broader applicability,making them a more viable alternative.This study introduces a novel approach to minimizing flexoelectric effects in pLCs by investigating how single components influence flexoelectric behavior in mixtures through an effective experimental methodology.Two innovative measurement techniques—(1)flexoelectric coefficient difference analysis and(2)displacement-current measurement(DCM)—are presented,marking the first application of DCM for verifying flexoelectric effects.The proposed system eliminates uncertainties associated with previous methods,providing a reliable framework for selecting liquid crystal components with minimal flexoelectric effects while preserving key electro-optic properties.Given pLCs'higher reliability,lower production costs,and broader material selection,these advancements hold significant potential for low-power displays.We believe this work enhances flexoelectric analysis in nematic liquid crystals and contributes to sustainable innovation in the display industry,aligning with global energy-saving goals.
基金upported by the National Natural Science Foundation of China(Grant No.62274138)the Natural Science Foundation of Fujian Province of China(Grant No.2023J06012)+2 种基金the Science and Technology Plan Project in Fujian Province of China(Grant No.2021H0011)the Funda-mental Research Funds for the Central Universities(Grant No.20720230029)the Compound Semiconductor Technology Collaborative Innovation Platform Project of FuXiaQuan National Independent Innovation Demonstration Zone(Grant No.3502ZCQXT2022005).
文摘In recent years,artificial intelligence(AI)has demonstrated immense potential in driving breakthroughs in the semiconductor industry,particularly in full-color display technologies.Benefiting from the deep integration of AI,these technologies are experiencing unprecedented innovation and industrial transformation,garnering significant attention.These advancements provide a solid foundation for displays with higher color gamut and resolution.In addition,the integration of deep learning with dimming technologies has enabled new display systems to deliver superior viewing experiences with reduced energy consumption.This review highlights recent progress in four key areas of AI application in full-color display technologies:epitaxial structure design,defect detection and repair,perovskite synthesis,and dynamic dimming.AI-driven advancements in these domains are paving the way for smarter,more efficient display technologies.By leveraging AI’s powerful data processing and optimization capabilities,full-color display systems are poised to achieve enhanced performance,energy efficiency,and user satisfaction,marking a significant step toward a more intelligent and innovative future.
基金supported by the Natural Science Foundation of Jiangxi Province(20232ACB204002&20232BAB202044)Jiangxi Provincial Key Laboratory of Flexible Electronics(20212BCD42004&20242BCC32010).
文摘Flexible electrochromic devices(FECDs)demonstrate significant potential for applications in wearable elec-tronics,military camouflage,and flexible smart displays.As a crucial electrochromic material,poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS)is widely used in FECDs due to its excellent mechanical flexibility,tunable conductivity,and non-toxicity.However,the manufacturing process for patterned PEDOT:PSS electrochromic devices remains intricate,costly,and challenging to personalize.To address this challenge,we have developed a 3D-printable ink with controllable rheological properties through a concentration-tuning strategy,enabling programmable,patterned printing of PEDOT-based conductive polymer electrochromic layers.The 3D-printed FECDs exhibit outstanding electrochromic performance,including a high optical contrast(up to 47.9%at 635 nm),fast response times(t_(c)=1.6 s;t_(b)=0.6 s),high coloration efficiency(352 cm^(2) C^(-1)),and good cycling stability(with only a 9.3%decrease in optical contrast after 100 electrochemical cycles).Finally,we utilize 3D printing technology to construct flexible,patterned PEDOT:PSS electrochromic devices with bespoke butterfly designs.This work establishes the theoretical foundation for the application of 3D printing technology in PEDOT:PSS flexible electrochromic devices.
基金supported by the National ScienceFoundation for Distinguished Young Scholars(51925301)the National Natural Science Foundation of China(52122315 and 21972008)+3 种基金Beijing Nova Program(Z201100006820021)the Fundamental Research Funds for the Central Universities(XK1902)the Wanren Plan(wrjh201903)the Open Project of State Key Laboratory(sklssm2022)。
文摘Micro-light emitting diode(micro-LED)is an emerging display technology with excellent performance of high contrast,low power consumption,long lifetime,and fast response time compared with the current display(e.g.,liquid crystal and organic LED(OLED)).With technological advantages,micro-LED holds promise to be widely applied in augmented reality(AR),flexible screens,etc.and is thus regarded as the next generation of display technology.In the process flow of micro-LED,the step known as mass transfer that requires transferring millions of micro-LEDs from a growth substrate to a display plane,is one of the key challenges limiting the commercialization of micro-LED from laboratory.Worldwide academic and industrial efforts have been devoted to developing mass transfer strategies with purposes of improving yield and reducing cost.Herein we review three main categories of mass transfer technologies for micro-LED display(pick-and-place,fluid self-assembly and laser-enabled advanced placement)and the coupled detection and repair technologies after transfer.Discussions and comparisons have been provided about the underlying general principle,history,and representative parties,advantages,and disadvantages(yield/efficiency/cost)of these technologies.We further envision the application prospect of these transfer technologies and the promise of the future display of micro-LED.
