Extreme cold weather seriously harms human thermoregulatory system,necessitating high-performance insulating garments to maintain body temperature.However,as the core insulating layer,advanced fibrous materials always...Extreme cold weather seriously harms human thermoregulatory system,necessitating high-performance insulating garments to maintain body temperature.However,as the core insulating layer,advanced fibrous materials always struggle to balance mechanical properties and thermal insulation,resulting in their inability to meet the demands for both washing resistance and personal protection.Herein,inspired by the natural spring-like structures of cucumber tendrils,a superelastic and washable micro/nanofibrous sponge(MNFS)based on biomimetic helical fibers is directly prepared utilizing multiple-jet electrospinning technology for high-performance thermal insulation.By regulating the conductivity of polyvinylidene fluoride solution,multiple-jet ejection and multiple-stage whipping of jets are achieved,and further control of phase separation rates enables the rapid solidification of jets to form spring-like helical fibers,which are directly entangled to assemble MNFS.The resulting MNFS exhibits superelasticity that can withstand large tensile strain(200%),1000 cyclic tensile or compression deformations,and retain good resilience even in liquid nitrogen(-196℃).Furthermore,the MNFS shows efficient thermal insulation with low thermal conductivity(24.85 mW m^(-1)K^(-1)),close to the value of dry air,and remains structural stability even after cyclic washing.This work offers new possibilities for advanced fibrous sponges in transportation,environmental,and energy applications.展开更多
Air pollution,including airborne pathogens and particulate matter(PM),has become a prominent issue affecting human health and safety.Conventional air filtration materials do not meet the requirements for efficient PM ...Air pollution,including airborne pathogens and particulate matter(PM),has become a prominent issue affecting human health and safety.Conventional air filtration materials do not meet the requirements for efficient PM capture or do not instantly kill pathogens,leading to increased risk of direct/indirect contact transmission and infection due to the accumulation of pathogens during filtration.Electrospun nanofibrous membranes have emerged as a promising platform due to their rich porous structure,finer fiber diameters,good internal connectivity,and the ability to easily incorporate active chemicals for antimicrobial function.In this review,antimicrobial mechanisms of nanofibrous membranes for air filtration and PM capture mechanisms of nanofibers were firstly investigated,and various types of electrospun nanofibrous membranes with different antimicrobial agents for efficient air filtration were described in detail,including organic antimicrobial agents,inorganic antimicrobial agents and metal-organic frameworks.We hope this work could provide a better practical insight for designing novel electrospun nanofibrous membranes with antimicrobial efficacy for efficient air filtration.展开更多
Platinum(Pt)/nanofibrous polyaniline(PANI) electrode was prepared by pulse galvanostatic method and characterized by scanning electron microscopy.The electrochemical behavior of L-cysteine at the Pt/nanofibrous PANI e...Platinum(Pt)/nanofibrous polyaniline(PANI) electrode was prepared by pulse galvanostatic method and characterized by scanning electron microscopy.The electrochemical behavior of L-cysteine at the Pt/nanofibrous PANI electrode was investigated by cyclic voltammetry.The results indicate that the pH value of the solution and the Pt loading of the electrode have great effect on the electrocatalytic property of the Pt /nanofibrous PANI electrode;the suitable Pt loading of the electrode is 600 μg/cm2 and the suitable pH value of the solution is 4.5 for investigating L-cysteine oxidation.The L-cysteine sensor based on the Pt/nanofibrous PANI electrode has a good selectivity,reproducibility and stability.The Pt/nanofibrous PANI electrode is highly sensitive to L-cysteine,and the linear calibration curve for the oxidation of L-cysteine can be observed in the range of 0.2-5.0 mmol/L.展开更多
Mine filling materials urgently need to improve mechanical properties and achieve low-carbon transformation.This study explores the mechanism of the synergistic effect of optimizing aggregate fractal grading and intro...Mine filling materials urgently need to improve mechanical properties and achieve low-carbon transformation.This study explores the mechanism of the synergistic effect of optimizing aggregate fractal grading and introducing CO_(2)nanobubble technology to improve the performance of cement-fly ash-based backfill materials(CFB).The properties including fluidity,setting time,uniaxial compressive strength,elastic modulus,porosity,microstructure and CO_(2)storage performance were systematically studied through methods such as fluidity evaluation,time test,uniaxial compression test,mercury intrusion porosimetry(MIP),scanning electron microscopy-energy dispersive spectroscopy analysis(SEM-EDS),and thermogravimetric-differential thermogravimetric analysis(TG-DTG).The experimental results show that the density and strength of the material are significantly improved under the synergistic effect of fractal dimension and CO_(2)nanobubbles.When the fractal dimension reaches 2.65,the mass ratio of coarse and fine aggregates reaches the optimal balance,and the structural density is greatly improved at the same time.At this time,the uniaxial compressive strength and elastic modulus reach their peak values,with increases of up to 13.46%and 27.47%,respectively.CO_(2)nanobubbles enhance the material properties by promoting hydration reaction and carbonization.At the microscopic level,CO_(2)nanobubble water promotes the formation of C-S-H(hydrated calcium silicate),C-A-S-H(hydrated calcium aluminium silicate)gel and CaCO_(3),which is the main way to enhance the performance.Thermogravimetric studies have shown that when the fractal dimension is 2.65,the dehydration of hydration products and the decarbonization process of CaCO_(3)are most obvious,and CO_(2)nanobubble water promotes the carbonization reaction,making it surpass the natural state.The CO_(2)sequestration quality of cement-fly ash-based materials treated with CO_(2)nanobubble water at different fractal dimensions increased by 12.4wt%to 99.8wt%.The results not only provide scientific insights for the design and implementation of low-carbon filling materials,but also provide a solid theoretical basis for strengthening green mining practices and promoting sustainable resource utilization.展开更多
The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impe...The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impedance tube instrument based on ISO10534-2：1998（E）. Results indicate that the first resonance absorption frequency of nanofibrous membranes shifts to the lower frequency with the increase of the back cavity or the thickness of membranes. Moreover, the sound absorption performance of the perforated pane/ can be greatly improved by combination with a thin layer of PAN nanofibrous membrane. Traditional acoustical damping materials （foam, fiber） coated with nanofibrous membranes have better acoustical performance in the low and medium frequency range than that of acoustical materials alone. All of the results demonstrate the PAN nanofibrous membrane is a suitable candidate for noise reduction.展开更多
The adsorption technology has been widely applied in water remediation for contamination removal of dyes and bacteria,by virtue of the advantages of adsorption technology including high efficiency,energy conservation ...The adsorption technology has been widely applied in water remediation for contamination removal of dyes and bacteria,by virtue of the advantages of adsorption technology including high efficiency,energy conservation and ease of operation.Simultaneous removal of dyes and bacteria has been realized by some reported materials,but to achieve satisfactory adsorption amounts and rates remain an unmet goal for decades.Herein,a poly(methacrylatoethyl trimethyl ammonium chloride-co-methyl methacrylate)copolymer was synthesized,and then blended with polyethersulfone for the fabrication of nanofibrous membranes via electrospinning for the use of fast and massive removal of dyes and bacteria.Owing to the introduction of abundant quaternary ammonium groups,the maximum adsorption amount for methyl orange was up to 909.8 mg g^(-1).In addition,the modified nanofibrous membranes showed good recyclability,broad applications in severe environments,selective adsorption ability,and excellent dynamic removal performance.Especially,thanks to the abundant functional groups,the membranes showed fast adsorption ability for bacteria through electrostatic interaction.It should be noted that the clearance ratio for Staphylococcus aureus or Escherichia coli by 6 min of static adsorption could reach 93%or 90%for each.Additionally,dynamic removal ratio via filtration with the nanofibrous membranes could reach 99.7%for Staphylococcus aureus or 98.7%for Escherichia coli in 90 s.Therefore,the proposed approach towards the quaternary ammonium modified polyethersulfone nanofibrous membranes creates a new route for ultra-high adsorption capacity and ultra-fast removal rates for dyes and bacteria in water remediation.展开更多
In this study, the mechanical properties of tungsten-rhenium wires with nanofibrous microstructure were investigated at both room temperature(RT) and 800?C. The strengthening mechanism associated to the nanofibrous mi...In this study, the mechanical properties of tungsten-rhenium wires with nanofibrous microstructure were investigated at both room temperature(RT) and 800?C. The strengthening mechanism associated to the nanofibrous microstructure was discussed. The results showed that the tungsten-rhenium wires with nanofibrous grains exhibited a very high tensile strength reaching values of 3.5 GPa and 4.4 GPa for the coarse(grains diameter of 240 nm) and fine(grains diameter of 80 nm) wires, respectively. With increasing the temperature from RT to 800?C, the tensile strength decreased slightly but still held high values(1.8 GPa and 3.8 GPa). All the fracture surfaces exhibited apparent necking and characteristics of spear-edge shaped fracture surface, indicating excellent ductility of the wires. A model of the strengthening mechanism of these tungsten-rhenium wires was proposed.展开更多
Polypyrrole （PPy） is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We ...Polypyrrole （PPy） is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We embedded PPy into poly（lactic acid） （PLA） nanofibers via electrospinning and fabricated a PLA/PPy nanofibrous scaffold containing 15% PPy with sustained conductivity and aligned topog- raphy, qhere was good biocompatibility between the scaffold and human umbilical cord mesenchymal stem cells as well as Schwann cells. Additionally, the direction of cell elongation on the scaffold was parallel to the direction of fibers. Our findings suggest that the aligned PLA/PPy nanofibrous scaffold is a promising biomaterial for peripheral nerve regeneration.展开更多
Reported here is a protocol to fabricate a biocatalyst with high enzyme loading and activity retention, from the conjugation of electrospun nanofibrous membrane having biomimetic phospholipid moiety and lipase. To imp...Reported here is a protocol to fabricate a biocatalyst with high enzyme loading and activity retention, from the conjugation of electrospun nanofibrous membrane having biomimetic phospholipid moiety and lipase. To improve the catalytic efficiency and activity of the immobilized enzyme, poly（acrylonitrile-co-2-methacryloyloxyethyl phosphorylcholine）s（PANCMPCs） were, respectively, electrospun into nanofibrous membranes with a mean diameter of 90 nm, as a support for enzyme immobilization. Lipase from Candida rugosa was immobilized on these nanofibrous membranes by adsorption. Properties of immobilized lipase on PANCMPC nanofibrous membranes were compared with those of the lipase immobilized on the polyacrylonitrile（PAN） nanofibrous and sheet membranes, respectively. Effective enzyme loading on the nanofibrous membranes was achieved up to 22.0 mg/g, which was over 10 times that on the sheet membrane. The activity retention of immobilized lipase increased from 56.4% to 76.8% with an increase in phospholipid moiety from 0 to 9.6%（molar fraction） in the nanofibrous membrane. Kinetic parameter Km was also determined for free and immobilized lipase. The Km value of the immobilized lipase on the nanofibrous membrane was obviously lower than that on the sheet membrane. The optimum pH was 7.7 for free lipase, but shifted to 8.3-8.5 for immobilized lipases. The optimum temperature was determined to be 35 ℃ for the free enzyme, but 42-44℃ for the immobilized ones, respectively. In addition, the thermal stability, reusability, and storage stability of the immobilized lipase were obviously improved compared to the free one.展开更多
Porphyrin-filled nanofibrous membranes were facilely prepared by electrospinning of the mixtures of poly（acrylonitrile-co-acrylic acid）（PANCAA） and porphyrins. 5,10,15,20-Tetraphenylporphyrin（TPP） and its metal-...Porphyrin-filled nanofibrous membranes were facilely prepared by electrospinning of the mixtures of poly（acrylonitrile-co-acrylic acid）（PANCAA） and porphyrins. 5,10,15,20-Tetraphenylporphyrin（TPP） and its metal-loderivatives（ZnTPP and CuTPP） were studied as filling mediators for the immobilization of redox enzyme. Results indicate that the introduction of TPP, ZnTPP and CuTPP improves the retention activity of the immobilized catalase. Among these three porphyrins, the ZnTPP-filled PANCAA nanofibrous membrane exhibits an activity retention of 93%, which is an exciting improvement. This improvement is attributed to both the strong catalase-porphyrin affinity and the possible facilitated electron transfer induced by the porphyrin as evidenced by quartz crystal microbalance （QCM） and fluorescence spectroscopy studies.展开更多
Polynaphthalimide(PNI)with six-membered imide ring(_(6-)PI)has better chemical resistance than five-membered imide ring(_(5-)PI),but is difficult to be processed into nano fibers due to the poor processability.In this...Polynaphthalimide(PNI)with six-membered imide ring(_(6-)PI)has better chemical resistance than five-membered imide ring(_(5-)PI),but is difficult to be processed into nano fibers due to the poor processability.In this work,we proposed a template strategy to fabricate nanofiber _(6-)PI membranes and their composite membranes.Neat _(6-)PI and _(6-)PI composite fibrous membranes were prepared using high-molecular-weight polymers _(5-)PAA and PVP as templates by electrospinning.FTIR,DMA,TGA and tensile tests were used to characterize their chemical structures,thermal stability and mechanical properties.Further eye-observation,micro-morphology investigation and tensile tests were applied to evaluate the chemical resistance of nanofibrous membranes in strong acid,strong alkaline,and concentrated salt.The results demonstrated that 6-PI nano fibrous membra nes possessed the best thermal stability,best acid,alkaline,and salt resista nee with the highest mecha nical rete ntion.This study will provide basic information for high-performance electrospun 6-PI nanofiber membranes and provide opportunities for applications of Pls in different chemically harsh environments.展开更多
To develop a smart free-standing surface enhanced Raman scattering(SERS) substrate,silver nanoparticles(AgNPs) embedded temperature-sensitive nanofibrous membrane was fabricated by electrospinning their aqueous soluti...To develop a smart free-standing surface enhanced Raman scattering(SERS) substrate,silver nanoparticles(AgNPs) embedded temperature-sensitive nanofibrous membrane was fabricated by electrospinning their aqueous solution containing the copolymer poly(N-isopropylacrylamide-co-Nhydroxymethylacrylamide),followed by heat treatment to form crosslinking structure within its constituent nanofibers.To avoid negative effect of the additive like stabilizer and the reactant like reductant on their SERS efficiency,the AgNPs were in-situ synthesized through reducing Ag^+ions dissolved in the polymer solution by ultraviolet irradiation.The prepared hybrid nanofibrous membrane with high stability in aqueous medium can reach its swelling or deswelling equilibrium state within 15 seconds with the medium temperature changing between 25℃and 50℃alternately.When it was used as a free-standing SERS substrate,10^-12 mol/L of 4-nitrothiophenol in aqueous solution can be detected at room temperature,and elevating detection temperature can further lower its low detection limit.Since its generated SERS signal has desirable reproducibility,it can be used as SERS substrate for quantitative analysis.Moreover,the hybrid membrane as SERS substrate is capable of real-time monitoring the reduction of 4-nitrothiophenol into 4-aminothiophenol catalyzed by its embedded AgNPs,and the detected intermediate indicates that the reaction proceeds via a condensation route.展开更多
Collagen(Col)/chitosan(CS)nanofibrous membrane has great potential to be used as wound dressing.However,current Col/CS nanofibrous membrane produced from electrospinning can not offer sufficient mechanical strength fo...Collagen(Col)/chitosan(CS)nanofibrous membrane has great potential to be used as wound dressing.However,current Col/CS nanofibrous membrane produced from electrospinning can not offer sufficient mechanical strength for practical applications.Herein,a novel mixed solvent was used to prepare next-generation high-strength Col/CS nanofibrous membrane.Meanwhile,the optimal Col to CS weight ratio was investigated as well.The asproduced membrane was examined by scanning electron microscopy(SEM),attenuated total reflectance Fourier transform infrared spectroscopy(ATR-FTIR),differential scanning calorimetry(DSC),and XF-1A tester to study its morphological,chemical,thermal and mechanical properties.The preliminary results demonstrated that the mechanical properties of Col/CS nanofibrous membranes were enhanced substantially with the increase of CS weight ratios from 0 to 90%and the optimal Col to CS weight ratio was determined to be 1∶1.A promising way was presented to fabricate Col/CS electrospun nanofibrous membrane with sufficient mechanical strength for practical wound dressing applications.展开更多
Adsorption and photocatalysis are regarded as two desirable technologies for wastewater remediation,but are still unsatisfactory in removal effect,eco-friendly regeneration and facile reusability.In this study,we deve...Adsorption and photocatalysis are regarded as two desirable technologies for wastewater remediation,but are still unsatisfactory in removal effect,eco-friendly regeneration and facile reusability.In this study,we developed a composite nanofibrous membrane material with excellent removal performance for organic pollutants based on synergistic adsorption and photocatalysis.A novel boron-doped,nitrogen-deficient graphitic carbon nitride(B-C3N4)photocatalyst as well as an amphiphilic copolymer of methyl methacrylate and acrylic acid(p(MMA-AA))were synthesized respectively,and then used to modify polyethersulfone for the fabrication of composite nanofibrous membrane with improved hydrophilicity,negativelycharge property and enhanced visible light response simultaneously.Subsequently,the synergistic effect of adsorption and photocatalytic degradation for organic pollutants were identified especially and resulted in an excellent removal efficiency even superior to the combination of adsorption and photocatalytic degradation,which could be called a“1+1>2”effect.In addition,the regeneration and reusability,the purification ability for multicomponent wastewater,and the photocatalytic mechanism,were investigated and discussed systematically.In this work,we not only prepared the nanofibrous membrane with synergistic effect of adsorption and photocatalysis,but also provided a versatile approach to design dualfunctional support material to ensure the practical applications of powdery photocatalyst in wastewater treatment.展开更多
One-dimensional(1D)SiO_(2) nanofibers(SNFs),one of the most popular inorganic nanomaterials,have aroused widespread attention because of their excellent chemical stability,as well as unique optical and thermal charact...One-dimensional(1D)SiO_(2) nanofibers(SNFs),one of the most popular inorganic nanomaterials,have aroused widespread attention because of their excellent chemical stability,as well as unique optical and thermal characteristics.Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures,manageable dimensions,and modifiable properties,which hold great potential in many cutting-edge applications including aerospace,nanodevice,and energy.In this review,substantial advances in the structural design,controllable synthesis,and multifunctional applications of electrospun SNFs are highlighted.We begin with a brief introduction to the fundamental principles,available raw materials,and typical apparatus of electrospun SNFs.We then discuss the strategies for preparing SNFs with diverse structures in detail,especially stressing the newly emerging three-dimensional SiO_(2) nanofibrous aerogels.We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement.In addition,we showcase recent applications enabled by electrospun SNFs,with particular emphasis on physical protection,health care and water treatment.In the end,we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.展开更多
Three-dimensional(3D) printing provides a promising way to fabricate biodegradable scaffolds with designer architectures for the regeneration of various tissues.However,the existing3D-printed scaffolds commonly suffer...Three-dimensional(3D) printing provides a promising way to fabricate biodegradable scaffolds with designer architectures for the regeneration of various tissues.However,the existing3D-printed scaffolds commonly suffer from weak cell-scaffold interactions and insufficient cell organizations due to the limited resolution of the 3D-printed features.Here,composite scaffolds with mechanically-robust frameworks and aligned nanofibrous architectures are presented and hybrid manufactured by combining techniques of 3D printing,electrospinning,and unidirectional freeze-casting.It was found that the composite scaffolds provided volume-stable environments and enabled directed cellular infiltration for tissue regeneration.In particular,the nanofibrous architectures with aligned micropores served as artificial extracellular matrix materials and improved the attachment,proliferation,and infiltration of cells.The proposed scaffolds can also support the adipogenic maturation of adipose-derived stem cells(ADSCs)in vitro.Moreover,the composite scaffolds were found to guide directed tissue infiltration and promote nearby neovascularization when implanted into a subcutaneous model of rats,and the addition of ADSCs further enhanced their adipogenic potential.The presented hybrid manufacturing strategy might provide a promising way to produce additional topological cues within 3D-printed scaffolds for better tissue regeneration.展开更多
基金supported by Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001)the National Natural Science Foundation of China(No.52273053)the Chenguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission(No.21CGA41)。
文摘Extreme cold weather seriously harms human thermoregulatory system,necessitating high-performance insulating garments to maintain body temperature.However,as the core insulating layer,advanced fibrous materials always struggle to balance mechanical properties and thermal insulation,resulting in their inability to meet the demands for both washing resistance and personal protection.Herein,inspired by the natural spring-like structures of cucumber tendrils,a superelastic and washable micro/nanofibrous sponge(MNFS)based on biomimetic helical fibers is directly prepared utilizing multiple-jet electrospinning technology for high-performance thermal insulation.By regulating the conductivity of polyvinylidene fluoride solution,multiple-jet ejection and multiple-stage whipping of jets are achieved,and further control of phase separation rates enables the rapid solidification of jets to form spring-like helical fibers,which are directly entangled to assemble MNFS.The resulting MNFS exhibits superelasticity that can withstand large tensile strain(200%),1000 cyclic tensile or compression deformations,and retain good resilience even in liquid nitrogen(-196℃).Furthermore,the MNFS shows efficient thermal insulation with low thermal conductivity(24.85 mW m^(-1)K^(-1)),close to the value of dry air,and remains structural stability even after cyclic washing.This work offers new possibilities for advanced fibrous sponges in transportation,environmental,and energy applications.
基金financial support from the Fundamental Research Funds for the Central Universities of China(No.DUT22YG237)Guidance program of Dalian Life and Health field(No.2022ZXYG29)。
文摘Air pollution,including airborne pathogens and particulate matter(PM),has become a prominent issue affecting human health and safety.Conventional air filtration materials do not meet the requirements for efficient PM capture or do not instantly kill pathogens,leading to increased risk of direct/indirect contact transmission and infection due to the accumulation of pathogens during filtration.Electrospun nanofibrous membranes have emerged as a promising platform due to their rich porous structure,finer fiber diameters,good internal connectivity,and the ability to easily incorporate active chemicals for antimicrobial function.In this review,antimicrobial mechanisms of nanofibrous membranes for air filtration and PM capture mechanisms of nanofibers were firstly investigated,and various types of electrospun nanofibrous membranes with different antimicrobial agents for efficient air filtration were described in detail,including organic antimicrobial agents,inorganic antimicrobial agents and metal-organic frameworks.We hope this work could provide a better practical insight for designing novel electrospun nanofibrous membranes with antimicrobial efficacy for efficient air filtration.
基金Project(20050532008) supported by the PhD. Program Foundation of Ministry of Education of ChinaProject(06JJ4005) supported by the Natural Science Foundation of Hunan Province+1 种基金 Project(20060400874)supported by the Postdoctoral Foundation of China Project supported by the Postdoctoral Foundation of Hunan University
文摘Platinum(Pt)/nanofibrous polyaniline(PANI) electrode was prepared by pulse galvanostatic method and characterized by scanning electron microscopy.The electrochemical behavior of L-cysteine at the Pt/nanofibrous PANI electrode was investigated by cyclic voltammetry.The results indicate that the pH value of the solution and the Pt loading of the electrode have great effect on the electrocatalytic property of the Pt /nanofibrous PANI electrode;the suitable Pt loading of the electrode is 600 μg/cm2 and the suitable pH value of the solution is 4.5 for investigating L-cysteine oxidation.The L-cysteine sensor based on the Pt/nanofibrous PANI electrode has a good selectivity,reproducibility and stability.The Pt/nanofibrous PANI electrode is highly sensitive to L-cysteine,and the linear calibration curve for the oxidation of L-cysteine can be observed in the range of 0.2-5.0 mmol/L.
基金financially supported by the China Scholarship Council(CSC)。
文摘Mine filling materials urgently need to improve mechanical properties and achieve low-carbon transformation.This study explores the mechanism of the synergistic effect of optimizing aggregate fractal grading and introducing CO_(2)nanobubble technology to improve the performance of cement-fly ash-based backfill materials(CFB).The properties including fluidity,setting time,uniaxial compressive strength,elastic modulus,porosity,microstructure and CO_(2)storage performance were systematically studied through methods such as fluidity evaluation,time test,uniaxial compression test,mercury intrusion porosimetry(MIP),scanning electron microscopy-energy dispersive spectroscopy analysis(SEM-EDS),and thermogravimetric-differential thermogravimetric analysis(TG-DTG).The experimental results show that the density and strength of the material are significantly improved under the synergistic effect of fractal dimension and CO_(2)nanobubbles.When the fractal dimension reaches 2.65,the mass ratio of coarse and fine aggregates reaches the optimal balance,and the structural density is greatly improved at the same time.At this time,the uniaxial compressive strength and elastic modulus reach their peak values,with increases of up to 13.46%and 27.47%,respectively.CO_(2)nanobubbles enhance the material properties by promoting hydration reaction and carbonization.At the microscopic level,CO_(2)nanobubble water promotes the formation of C-S-H(hydrated calcium silicate),C-A-S-H(hydrated calcium aluminium silicate)gel and CaCO_(3),which is the main way to enhance the performance.Thermogravimetric studies have shown that when the fractal dimension is 2.65,the dehydration of hydration products and the decarbonization process of CaCO_(3)are most obvious,and CO_(2)nanobubble water promotes the carbonization reaction,making it surpass the natural state.The CO_(2)sequestration quality of cement-fly ash-based materials treated with CO_(2)nanobubble water at different fractal dimensions increased by 12.4wt%to 99.8wt%.The results not only provide scientific insights for the design and implementation of low-carbon filling materials,but also provide a solid theoretical basis for strengthening green mining practices and promoting sustainable resource utilization.
基金financially supported by the National Natural Science Foundation of China(Nos.50821062,50673097)CAS Innovation Project(No.2007CB936400)
文摘The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impedance tube instrument based on ISO10534-2：1998（E）. Results indicate that the first resonance absorption frequency of nanofibrous membranes shifts to the lower frequency with the increase of the back cavity or the thickness of membranes. Moreover, the sound absorption performance of the perforated pane/ can be greatly improved by combination with a thin layer of PAN nanofibrous membrane. Traditional acoustical damping materials （foam, fiber） coated with nanofibrous membranes have better acoustical performance in the low and medium frequency range than that of acoustical materials alone. All of the results demonstrate the PAN nanofibrous membrane is a suitable candidate for noise reduction.
基金the National Natural Science Foundation of China(Nos.51773127,51873115,51803131 and 51803134)the State Key Research Development Programme of China(Nos.2016YFC1103000 and 2018YFC1106400)the Science and Technology Program of Sichuan Province(Nos.2017SZ0011 and 2019YJ0132)。
文摘The adsorption technology has been widely applied in water remediation for contamination removal of dyes and bacteria,by virtue of the advantages of adsorption technology including high efficiency,energy conservation and ease of operation.Simultaneous removal of dyes and bacteria has been realized by some reported materials,but to achieve satisfactory adsorption amounts and rates remain an unmet goal for decades.Herein,a poly(methacrylatoethyl trimethyl ammonium chloride-co-methyl methacrylate)copolymer was synthesized,and then blended with polyethersulfone for the fabrication of nanofibrous membranes via electrospinning for the use of fast and massive removal of dyes and bacteria.Owing to the introduction of abundant quaternary ammonium groups,the maximum adsorption amount for methyl orange was up to 909.8 mg g^(-1).In addition,the modified nanofibrous membranes showed good recyclability,broad applications in severe environments,selective adsorption ability,and excellent dynamic removal performance.Especially,thanks to the abundant functional groups,the membranes showed fast adsorption ability for bacteria through electrostatic interaction.It should be noted that the clearance ratio for Staphylococcus aureus or Escherichia coli by 6 min of static adsorption could reach 93%or 90%for each.Additionally,dynamic removal ratio via filtration with the nanofibrous membranes could reach 99.7%for Staphylococcus aureus or 98.7%for Escherichia coli in 90 s.Therefore,the proposed approach towards the quaternary ammonium modified polyethersulfone nanofibrous membranes creates a new route for ultra-high adsorption capacity and ultra-fast removal rates for dyes and bacteria in water remediation.
基金financially supported by the National Natural Science Foundation of China(No.51271021)Beijing Natural Science Foundation(No.2162025)State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing
文摘In this study, the mechanical properties of tungsten-rhenium wires with nanofibrous microstructure were investigated at both room temperature(RT) and 800?C. The strengthening mechanism associated to the nanofibrous microstructure was discussed. The results showed that the tungsten-rhenium wires with nanofibrous grains exhibited a very high tensile strength reaching values of 3.5 GPa and 4.4 GPa for the coarse(grains diameter of 240 nm) and fine(grains diameter of 80 nm) wires, respectively. With increasing the temperature from RT to 800?C, the tensile strength decreased slightly but still held high values(1.8 GPa and 3.8 GPa). All the fracture surfaces exhibited apparent necking and characteristics of spear-edge shaped fracture surface, indicating excellent ductility of the wires. A model of the strengthening mechanism of these tungsten-rhenium wires was proposed.
基金financially supported by Tsinghua University Initiative Scientific Research Program,No.20131089199the National Key Research and Development Program of China,No.2016YFB0700802the National Program on Key Basic Research Project of China(973 Program),No.2012CB518106,2014CB542201
文摘Polypyrrole （PPy） is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We embedded PPy into poly（lactic acid） （PLA） nanofibers via electrospinning and fabricated a PLA/PPy nanofibrous scaffold containing 15% PPy with sustained conductivity and aligned topog- raphy, qhere was good biocompatibility between the scaffold and human umbilical cord mesenchymal stem cells as well as Schwann cells. Additionally, the direction of cell elongation on the scaffold was parallel to the direction of fibers. Our findings suggest that the aligned PLA/PPy nanofibrous scaffold is a promising biomaterial for peripheral nerve regeneration.
基金Supported by the National Natural Science Foundation of China for Distinguished Young Scholars(No50625309)the National Postdoctoral Science Foundation of China(No20060400337)
文摘Reported here is a protocol to fabricate a biocatalyst with high enzyme loading and activity retention, from the conjugation of electrospun nanofibrous membrane having biomimetic phospholipid moiety and lipase. To improve the catalytic efficiency and activity of the immobilized enzyme, poly（acrylonitrile-co-2-methacryloyloxyethyl phosphorylcholine）s（PANCMPCs） were, respectively, electrospun into nanofibrous membranes with a mean diameter of 90 nm, as a support for enzyme immobilization. Lipase from Candida rugosa was immobilized on these nanofibrous membranes by adsorption. Properties of immobilized lipase on PANCMPC nanofibrous membranes were compared with those of the lipase immobilized on the polyacrylonitrile（PAN） nanofibrous and sheet membranes, respectively. Effective enzyme loading on the nanofibrous membranes was achieved up to 22.0 mg/g, which was over 10 times that on the sheet membrane. The activity retention of immobilized lipase increased from 56.4% to 76.8% with an increase in phospholipid moiety from 0 to 9.6%（molar fraction） in the nanofibrous membrane. Kinetic parameter Km was also determined for free and immobilized lipase. The Km value of the immobilized lipase on the nanofibrous membrane was obviously lower than that on the sheet membrane. The optimum pH was 7.7 for free lipase, but shifted to 8.3-8.5 for immobilized lipases. The optimum temperature was determined to be 35 ℃ for the free enzyme, but 42-44℃ for the immobilized ones, respectively. In addition, the thermal stability, reusability, and storage stability of the immobilized lipase were obviously improved compared to the free one.
基金Supported by the National High-Tech Research and Development Program of China(No.2007AA10Z301) the National Natural Science Foundation of China for Distinguished Young Scholars(No.50625309)
文摘Porphyrin-filled nanofibrous membranes were facilely prepared by electrospinning of the mixtures of poly（acrylonitrile-co-acrylic acid）（PANCAA） and porphyrins. 5,10,15,20-Tetraphenylporphyrin（TPP） and its metal-loderivatives（ZnTPP and CuTPP） were studied as filling mediators for the immobilization of redox enzyme. Results indicate that the introduction of TPP, ZnTPP and CuTPP improves the retention activity of the immobilized catalase. Among these three porphyrins, the ZnTPP-filled PANCAA nanofibrous membrane exhibits an activity retention of 93%, which is an exciting improvement. This improvement is attributed to both the strong catalase-porphyrin affinity and the possible facilitated electron transfer induced by the porphyrin as evidenced by quartz crystal microbalance （QCM） and fluorescence spectroscopy studies.
基金by the National Natural Science Foundation of China(Nos.21975111,21774053,and 51803093)Natural Science Foundation of Jiangsu Province(No.BK20180770)and Open Project of Chemistry Department of Qin gdao Un iversity of Scie nee and Technology(No.QUSTHX201921).
文摘Polynaphthalimide(PNI)with six-membered imide ring(_(6-)PI)has better chemical resistance than five-membered imide ring(_(5-)PI),but is difficult to be processed into nano fibers due to the poor processability.In this work,we proposed a template strategy to fabricate nanofiber _(6-)PI membranes and their composite membranes.Neat _(6-)PI and _(6-)PI composite fibrous membranes were prepared using high-molecular-weight polymers _(5-)PAA and PVP as templates by electrospinning.FTIR,DMA,TGA and tensile tests were used to characterize their chemical structures,thermal stability and mechanical properties.Further eye-observation,micro-morphology investigation and tensile tests were applied to evaluate the chemical resistance of nanofibrous membranes in strong acid,strong alkaline,and concentrated salt.The results demonstrated that 6-PI nano fibrous membra nes possessed the best thermal stability,best acid,alkaline,and salt resista nee with the highest mecha nical rete ntion.This study will provide basic information for high-performance electrospun 6-PI nanofiber membranes and provide opportunities for applications of Pls in different chemically harsh environments.
基金the National Natural Science Foundation of China(Nos.51503033,51373030)
文摘To develop a smart free-standing surface enhanced Raman scattering(SERS) substrate,silver nanoparticles(AgNPs) embedded temperature-sensitive nanofibrous membrane was fabricated by electrospinning their aqueous solution containing the copolymer poly(N-isopropylacrylamide-co-Nhydroxymethylacrylamide),followed by heat treatment to form crosslinking structure within its constituent nanofibers.To avoid negative effect of the additive like stabilizer and the reactant like reductant on their SERS efficiency,the AgNPs were in-situ synthesized through reducing Ag^+ions dissolved in the polymer solution by ultraviolet irradiation.The prepared hybrid nanofibrous membrane with high stability in aqueous medium can reach its swelling or deswelling equilibrium state within 15 seconds with the medium temperature changing between 25℃and 50℃alternately.When it was used as a free-standing SERS substrate,10^-12 mol/L of 4-nitrothiophenol in aqueous solution can be detected at room temperature,and elevating detection temperature can further lower its low detection limit.Since its generated SERS signal has desirable reproducibility,it can be used as SERS substrate for quantitative analysis.Moreover,the hybrid membrane as SERS substrate is capable of real-time monitoring the reduction of 4-nitrothiophenol into 4-aminothiophenol catalyzed by its embedded AgNPs,and the detected intermediate indicates that the reaction proceeds via a condensation route.
基金Science and Technology Committee of Shanghai Municipality,China(No.14441901600)Fundamental Research Funds for the Central Universities,China(No.16D110119)“111 Project”Biomedical Textile Materials Science and Technology,China(No.B07024)
文摘Collagen(Col)/chitosan(CS)nanofibrous membrane has great potential to be used as wound dressing.However,current Col/CS nanofibrous membrane produced from electrospinning can not offer sufficient mechanical strength for practical applications.Herein,a novel mixed solvent was used to prepare next-generation high-strength Col/CS nanofibrous membrane.Meanwhile,the optimal Col to CS weight ratio was investigated as well.The asproduced membrane was examined by scanning electron microscopy(SEM),attenuated total reflectance Fourier transform infrared spectroscopy(ATR-FTIR),differential scanning calorimetry(DSC),and XF-1A tester to study its morphological,chemical,thermal and mechanical properties.The preliminary results demonstrated that the mechanical properties of Col/CS nanofibrous membranes were enhanced substantially with the increase of CS weight ratios from 0 to 90%and the optimal Col to CS weight ratio was determined to be 1∶1.A promising way was presented to fabricate Col/CS electrospun nanofibrous membrane with sufficient mechanical strength for practical wound dressing applications.
基金the National Natural Science Foundation of China(Nos.52003179 and 52073190)。
文摘Adsorption and photocatalysis are regarded as two desirable technologies for wastewater remediation,but are still unsatisfactory in removal effect,eco-friendly regeneration and facile reusability.In this study,we developed a composite nanofibrous membrane material with excellent removal performance for organic pollutants based on synergistic adsorption and photocatalysis.A novel boron-doped,nitrogen-deficient graphitic carbon nitride(B-C3N4)photocatalyst as well as an amphiphilic copolymer of methyl methacrylate and acrylic acid(p(MMA-AA))were synthesized respectively,and then used to modify polyethersulfone for the fabrication of composite nanofibrous membrane with improved hydrophilicity,negativelycharge property and enhanced visible light response simultaneously.Subsequently,the synergistic effect of adsorption and photocatalytic degradation for organic pollutants were identified especially and resulted in an excellent removal efficiency even superior to the combination of adsorption and photocatalytic degradation,which could be called a“1+1>2”effect.In addition,the regeneration and reusability,the purification ability for multicomponent wastewater,and the photocatalytic mechanism,were investigated and discussed systematically.In this work,we not only prepared the nanofibrous membrane with synergistic effect of adsorption and photocatalysis,but also provided a versatile approach to design dualfunctional support material to ensure the practical applications of powdery photocatalyst in wastewater treatment.
基金This work was supported by the National Natural Science Foundation of China(Nos.21961132024,51925302,and 52173055)the Ministry of Science and Technology of China(No.2021YFE0105100)the Fundamental Research Funds for the Central Universities and the DHU Distinguished Young Professor Program(No.LZA2020001).
文摘One-dimensional(1D)SiO_(2) nanofibers(SNFs),one of the most popular inorganic nanomaterials,have aroused widespread attention because of their excellent chemical stability,as well as unique optical and thermal characteristics.Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures,manageable dimensions,and modifiable properties,which hold great potential in many cutting-edge applications including aerospace,nanodevice,and energy.In this review,substantial advances in the structural design,controllable synthesis,and multifunctional applications of electrospun SNFs are highlighted.We begin with a brief introduction to the fundamental principles,available raw materials,and typical apparatus of electrospun SNFs.We then discuss the strategies for preparing SNFs with diverse structures in detail,especially stressing the newly emerging three-dimensional SiO_(2) nanofibrous aerogels.We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement.In addition,we showcase recent applications enabled by electrospun SNFs,with particular emphasis on physical protection,health care and water treatment.In the end,we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.
基金financially supported by the National Key Research and Development Program of China(2018YFA0703003)the National Natural Science Foundation of China (52125501)+2 种基金the Key Research Project of Shaanxi Province (2021LLRH-08,2021GXLH-Z-028)the Program for Innovation Team of Shaanxi Province (2023-CX-TD-17)the Fundamental Research Funds for the Central Universities。
文摘Three-dimensional(3D) printing provides a promising way to fabricate biodegradable scaffolds with designer architectures for the regeneration of various tissues.However,the existing3D-printed scaffolds commonly suffer from weak cell-scaffold interactions and insufficient cell organizations due to the limited resolution of the 3D-printed features.Here,composite scaffolds with mechanically-robust frameworks and aligned nanofibrous architectures are presented and hybrid manufactured by combining techniques of 3D printing,electrospinning,and unidirectional freeze-casting.It was found that the composite scaffolds provided volume-stable environments and enabled directed cellular infiltration for tissue regeneration.In particular,the nanofibrous architectures with aligned micropores served as artificial extracellular matrix materials and improved the attachment,proliferation,and infiltration of cells.The proposed scaffolds can also support the adipogenic maturation of adipose-derived stem cells(ADSCs)in vitro.Moreover,the composite scaffolds were found to guide directed tissue infiltration and promote nearby neovascularization when implanted into a subcutaneous model of rats,and the addition of ADSCs further enhanced their adipogenic potential.The presented hybrid manufacturing strategy might provide a promising way to produce additional topological cues within 3D-printed scaffolds for better tissue regeneration.
