The effect of Sb on the microstructure and mechanical properties of Mg2Si/Al-Si composites was investigated.The results show that Sb can improve the microstructure and mechanical properties of Mg2Si/Al-Si composites.W...The effect of Sb on the microstructure and mechanical properties of Mg2Si/Al-Si composites was investigated.The results show that Sb can improve the microstructure and mechanical properties of Mg2Si/Al-Si composites.When the content of Sb is 0.4%,the morphology of primary Mg2Si changes from dendrites to fine particles,the average size of Mg2Si particles is refined from 52 to 25μm,and the ultimate tensile strength and elongation of the composites increase from 102.1 MPa and 0.26% to 138.6 MPa and 0.36%,respectively.The strengthening mechanism can be attributed to the fine-grain strengthening.However,excessive Sb is disadvantageous to the modification of the composites.展开更多
Hypereutectic Al-Si alloy with variant Mg contents were fabricated by casting,and the effects of Mg content on the microstructure of primary Mg2Si particles in hypereutectic Al-Si alloys were investigated.The results ...Hypereutectic Al-Si alloy with variant Mg contents were fabricated by casting,and the effects of Mg content on the microstructure of primary Mg2Si particles in hypereutectic Al-Si alloys were investigated.The results show that the volume fraction of primary Mg2Si particles increases linearly with raising the Mg content,but the average size of Mg2Si particles does not exhibit a corresponding change.When the Mg content is 3%,á1 0 0？ directions have the fastest growth velocity,so that Mg2Si particles are likely to form octahedron shape.When gradually increasing the Mg content,the distributions of Mg and Si atoms on the solid-liquid interface become inhomogeneous,which results in the formation of irregular octahedron structures.Finally,when the Mg content is about 10%,the morphology of primary Mg2Si particles changes from the octahedron shape into various complex structures with a large size.展开更多
To control the morphology and size of the primary and eutectic Mg2Si phases in in situ Mg2Si/Al-Si composite and achieve a feasible and reliable technique to produce appropriate feedstock for the thixo-casting and rhe...To control the morphology and size of the primary and eutectic Mg2Si phases in in situ Mg2Si/Al-Si composite and achieve a feasible and reliable technique to produce appropriate feedstock for the thixo-casting and rheo-casting of this type of material, three AI-Si matrix composites reinforced by 5wt.%, 9wt.% and 17wt.% Mg2Si with hypoeutectic, eutectic and hypereutectic compositions were prepared by the low superheat pouring （LSP） process. The effects of the pouring temperature （superheat） on the morphology and size distribution of primary phases （primary e-AI and Mg2Si）, binary （a-AI ＋ Mg2Si） eutectic cell and eutectic Mg2Si were investigated. The experimental results show that low pouring temperature （superheat） not only refines the grain structure of the primary e-AI and binary （e-AI ＋ Mg2Si） eutectic cell in three composites and promotes the formation of more non- dendritic structural semi-solid metal （SSM） slurry of these phases; but also refines the primary and eutectic Mg2Si phases, which seems to be attributed to the creation of an ideal condition for the nucleation and the acquisition of a high survival of nuclei caused by the LSP process.展开更多
Optical microscope and SEM were used to observe the changes of the microstructure of Al 11.6% Si 0.4% Mg alloys with varying strontium additions and the effect of strontium on the crystallization of Mg 2Si phase was d...Optical microscope and SEM were used to observe the changes of the microstructure of Al 11.6% Si 0.4% Mg alloys with varying strontium additions and the effect of strontium on the crystallization of Mg 2Si phase was discussed. It is found that Mg 2Si phase nucleates on the surfaces of the eutectic silicon flakes in the unfully modified alloys, growing as meshwork or bamboo shoot shape, however, very few and fine Mg 2Si particles phase are isolated at the boundaries of the eutectic cells in the fully modified alloys. Strontium has an important influence on the crystallization of Mg 2Si phase in Al Si Mg casting alloys and it is thought to be related to the increase of the amount of dendritic α phase and the modifying degree of eutectic silicon phase.展开更多
文摘The effect of Sb on the microstructure and mechanical properties of Mg2Si/Al-Si composites was investigated.The results show that Sb can improve the microstructure and mechanical properties of Mg2Si/Al-Si composites.When the content of Sb is 0.4%,the morphology of primary Mg2Si changes from dendrites to fine particles,the average size of Mg2Si particles is refined from 52 to 25μm,and the ultimate tensile strength and elongation of the composites increase from 102.1 MPa and 0.26% to 138.6 MPa and 0.36%,respectively.The strengthening mechanism can be attributed to the fine-grain strengthening.However,excessive Sb is disadvantageous to the modification of the composites.
基金Project(CDJZR12240056)supported by the Fundamental Research Funds for Central Universities,ChinaProject(cstc2013jcyj A50014)supported by the Foundational and Cutting-edge Research Plan of Chongqing,China
文摘Hypereutectic Al-Si alloy with variant Mg contents were fabricated by casting,and the effects of Mg content on the microstructure of primary Mg2Si particles in hypereutectic Al-Si alloys were investigated.The results show that the volume fraction of primary Mg2Si particles increases linearly with raising the Mg content,but the average size of Mg2Si particles does not exhibit a corresponding change.When the Mg content is 3%,á1 0 0？ directions have the fastest growth velocity,so that Mg2Si particles are likely to form octahedron shape.When gradually increasing the Mg content,the distributions of Mg and Si atoms on the solid-liquid interface become inhomogeneous,which results in the formation of irregular octahedron structures.Finally,when the Mg content is about 10%,the morphology of primary Mg2Si particles changes from the octahedron shape into various complex structures with a large size.
文摘To control the morphology and size of the primary and eutectic Mg2Si phases in in situ Mg2Si/Al-Si composite and achieve a feasible and reliable technique to produce appropriate feedstock for the thixo-casting and rheo-casting of this type of material, three AI-Si matrix composites reinforced by 5wt.%, 9wt.% and 17wt.% Mg2Si with hypoeutectic, eutectic and hypereutectic compositions were prepared by the low superheat pouring （LSP） process. The effects of the pouring temperature （superheat） on the morphology and size distribution of primary phases （primary e-AI and Mg2Si）, binary （a-AI ＋ Mg2Si） eutectic cell and eutectic Mg2Si were investigated. The experimental results show that low pouring temperature （superheat） not only refines the grain structure of the primary e-AI and binary （e-AI ＋ Mg2Si） eutectic cell in three composites and promotes the formation of more non- dendritic structural semi-solid metal （SSM） slurry of these phases; but also refines the primary and eutectic Mg2Si phases, which seems to be attributed to the creation of an ideal condition for the nucleation and the acquisition of a high survival of nuclei caused by the LSP process.
文摘Optical microscope and SEM were used to observe the changes of the microstructure of Al 11.6% Si 0.4% Mg alloys with varying strontium additions and the effect of strontium on the crystallization of Mg 2Si phase was discussed. It is found that Mg 2Si phase nucleates on the surfaces of the eutectic silicon flakes in the unfully modified alloys, growing as meshwork or bamboo shoot shape, however, very few and fine Mg 2Si particles phase are isolated at the boundaries of the eutectic cells in the fully modified alloys. Strontium has an important influence on the crystallization of Mg 2Si phase in Al Si Mg casting alloys and it is thought to be related to the increase of the amount of dendritic α phase and the modifying degree of eutectic silicon phase.
