The as-cast Mg-8 Li-xZn-yGd(x=1 2, 3,4;y=1,2;wt.%)alloys were prepared in a vacuum induction furnace and their microstructure and mechanical properties were investigated. The results show that the increase of Zn conte...The as-cast Mg-8 Li-xZn-yGd(x=1 2, 3,4;y=1,2;wt.%)alloys were prepared in a vacuum induction furnace and their microstructure and mechanical properties were investigated. The results show that the increase of Zn content results in the volume fraction of W-phase(Mg3 Zn3 Gd2) increasing while that of Mg3 Gd phase decreasing. The strength of Mg-8 Li-xZn-1 Gd alloys is improved with the increase of Zn content,which is ascribed to the second phase strengthening of fine strip-like W-phase and the solid solution strengthening of Zn element.For Mg-8 Li-4 Zn-yGd alloys,the increase of Gd content leads to the appearance of coarse and discontinuous net-like W-phase, which decreases the strength. The Mg-8 Li-4 Zn-1 Gd alloy exhibits an optimum comprehensive performance with the yield strength, ultimate tensile strength and elongation of 154.7 MPa, 197.0 MPa and 12.4%, respectively. In addition,the aging behavior of the typical alloys was also investigated.展开更多
The evolution of the microstructure and mechanical properties of alloy system with nominally composition Mg-5Li-1Zn-0.5Ag-0.5Zr-xGd(x=0,1.2,2.4,3.6,4.8,6)is evaluated based on computational phase diagram and correspon...The evolution of the microstructure and mechanical properties of alloy system with nominally composition Mg-5Li-1Zn-0.5Ag-0.5Zr-xGd(x=0,1.2,2.4,3.6,4.8,6)is evaluated based on computational phase diagram and corresponding experimental studies.The results show that grains are significantly refined with the increase of Gd content.The main phases of as-cast alloys areα-Mg,β-Li,AgLi_(2)Mg,and Mg_(3)Gd.With the increase of Gd content,the amounts of Mg_(3)Gd phase andβ-Li phase have been increased.When the Gd content exceeds 3.6 wt%,Mg_(3)Gd phase precipitates in a form of the network at the grain boundaries.The precipitation ofβ-Li can be attributed to the competitive dissolution of Zn,Gd,and Li in Mg.Meanwhile,γ″is formed after the addition of Gd,which grows and transforms intoγ′with the increase of Gd content.In solidification process,stacking faults are formed by solid transformation of partialα-Mg and Mg_(3)Gd.Eventually,with the synergistic effect of Mg_(3)Gd,β-Li,andγ″(orγ′),as the Gd content increasing,the tensile strength of the alloy first increases,then decreases,and the elongation decreases.When the content of Gd is 4.8 wt%,the ultimate tensile strength and yield strength reach the maximum values of 227 MPa and 139 MPa,and the elongation is 18.1%,respectively.展开更多
基金Project(2016YFB0301004)supported by the National Key Research and Development Program of ChinaProject(51771115)supported by the National Natural Science Foundation of China+3 种基金Project(6141B06310106)supported by the Joint Fund for Space Science and Technology,ChinaProject(009-031-001)supported by the Science and Technology Innovation Program,ChinaProject(USCAST2016-18)supported by the Research Program of Joint Research Center of Advanced Spaceflight Technologies,ChinaProject(SAST2016048)supported by the Science Innovation Foundation of Shanghai Academy of Spaceflight Technology,China
文摘The as-cast Mg-8 Li-xZn-yGd(x=1 2, 3,4;y=1,2;wt.%)alloys were prepared in a vacuum induction furnace and their microstructure and mechanical properties were investigated. The results show that the increase of Zn content results in the volume fraction of W-phase(Mg3 Zn3 Gd2) increasing while that of Mg3 Gd phase decreasing. The strength of Mg-8 Li-xZn-1 Gd alloys is improved with the increase of Zn content,which is ascribed to the second phase strengthening of fine strip-like W-phase and the solid solution strengthening of Zn element.For Mg-8 Li-4 Zn-yGd alloys,the increase of Gd content leads to the appearance of coarse and discontinuous net-like W-phase, which decreases the strength. The Mg-8 Li-4 Zn-1 Gd alloy exhibits an optimum comprehensive performance with the yield strength, ultimate tensile strength and elongation of 154.7 MPa, 197.0 MPa and 12.4%, respectively. In addition,the aging behavior of the typical alloys was also investigated.
基金supported by the National Natural Science Foundation of China(Nos.51871068,51971071,52011530025,and U21A2049)the National Key Research and Development Program of China(No.2021YFE0103200)+2 种基金the Zhejiang Province Key Research and Development Program(No.2021C01086)the Open Foundation of Key Laboratory of Superlight Materials&Surface Technology of Ministry of Education(Nos.HEU10202113 and HEU10202202)the Natural Science Foundation of Heilongjiang Province(No.LH2019E086).
文摘The evolution of the microstructure and mechanical properties of alloy system with nominally composition Mg-5Li-1Zn-0.5Ag-0.5Zr-xGd(x=0,1.2,2.4,3.6,4.8,6)is evaluated based on computational phase diagram and corresponding experimental studies.The results show that grains are significantly refined with the increase of Gd content.The main phases of as-cast alloys areα-Mg,β-Li,AgLi_(2)Mg,and Mg_(3)Gd.With the increase of Gd content,the amounts of Mg_(3)Gd phase andβ-Li phase have been increased.When the Gd content exceeds 3.6 wt%,Mg_(3)Gd phase precipitates in a form of the network at the grain boundaries.The precipitation ofβ-Li can be attributed to the competitive dissolution of Zn,Gd,and Li in Mg.Meanwhile,γ″is formed after the addition of Gd,which grows and transforms intoγ′with the increase of Gd content.In solidification process,stacking faults are formed by solid transformation of partialα-Mg and Mg_(3)Gd.Eventually,with the synergistic effect of Mg_(3)Gd,β-Li,andγ″(orγ′),as the Gd content increasing,the tensile strength of the alloy first increases,then decreases,and the elongation decreases.When the content of Gd is 4.8 wt%,the ultimate tensile strength and yield strength reach the maximum values of 227 MPa and 139 MPa,and the elongation is 18.1%,respectively.
