The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3Al-(1,2,3)Sn(wt.%)alloys were investigated by X-ray diffractometry(XRD),optical microscopy(OM),scanning electron mi...The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3Al-(1,2,3)Sn(wt.%)alloys were investigated by X-ray diffractometry(XRD),optical microscopy(OM),scanning electron microscopy(SEM)and tensile test.It is found that,as-cast Mg-8Li-3Al-(1,2,3)Sn alloys consist ofα-Mg+β-Li duplex matrix,MgLiAl2 and Li2Mg Sn phases.Increasing Sn content leads to grain refinement ofα-Mg dendrites and increase in content of Li2MgSn phase.During hot extrusion,complete dynamic recrystallization(DRX)takes place inβ-Li phase while incomplete DRX takes place inα-Mg phase.As Sn content is increased,the volume fraction of DRXedα-Mg grains is increased and the average grain size of DRXedα-Mg grains is decreased.Increasing Sn content is beneficial to strength but harmful to ductility for as-cast Mg-8Li-3Al-(1,2,3)Sn alloys.Tensile properties of Mg-8Li-3Al-(1,2,3)Sn alloys are improved significantly via hot extrusion and Mg-8Li-3Al-2Sn alloy exhibits the best tensile properties.展开更多
目的通过电感耦合等离子体质谱(inductively coupled plasma mass spectrometry,ICP-MS)法建立加味左金丸中Cd、Pb、As、Hg、Co、V、Ni、Cu、Li、Sb、Ba、Mo、Sn、Cr、Na、Mg、Al、Ca、Ti、Mn、Fe、Zn、Ga、Se、Sr、Tl共计26种无机元素...目的通过电感耦合等离子体质谱(inductively coupled plasma mass spectrometry,ICP-MS)法建立加味左金丸中Cd、Pb、As、Hg、Co、V、Ni、Cu、Li、Sb、Ba、Mo、Sn、Cr、Na、Mg、Al、Ca、Ti、Mn、Fe、Zn、Ga、Se、Sr、Tl共计26种无机元素的测定方法。方法加味左金丸通过微波消解法处理后,根据相对分子质量的大小选择内标物,其中^(7)Li、^(23)Na、^(24)Mg、^(27)Al、^(40)Ca、^(48)Ti、^(51)V、^(52)Cr、^(55)Mn、^(56)Fe、^(58)Ni、^(59)Co、^(63)Cu、^(66)Zn、^(70)Ga、^(75)As、^(77)Se、^(86)Sr以^(72)Ge作为内标;^(95)Mo、^(114)Cd、^(118)Sn、^(121)Sb、^(137)Ba以^(115)In作为内标;^(202)Hg、^(205)Tl、^(208)Pb以^(209)Bi作为内标。对标准品溶液、空白溶液与供试品溶液进行分析,采用标准曲线法进行定量分析。通过ICP-MS法进行测定。结果26种无机元素线性的相关系数r≥0.9996,检出限为0.001~1.500μg/L,定量限为0.01~5.00μg/L,精密度与重复性试验的RSD均小于5%,平均回收率在82.64%~106.44%,RSD均小于5%。对3个厂家的12批样品进行了测定,26种元素的含量差异较大,其中Na、Mg、Ca、Fe 4种元素的含量比较高,均大于500μg/g,Cd、Pb、As、Hg、Co、Li、Sb、Mo、Sn、Cr、Se、Tl的含量比较低,均小于1μg/g。由结果可知,人体的常量元素,如Na、Mg、Ca的含量比较高,Cd、Pb、As、Hg等有害元素含量比较低。根据《中国药典》2020年版一部的要求,本品中Cd、Pb、As、Hg与Cu均符合规定。结论该方法快速、准确,可以用于加味左金丸中无机元素的测定。展开更多
基金Project(51601076)supported by the National Natural Science Foundation of ChinaProject(17KJA430005)supported by the Natural Science Fund for Colleges and Universities in Jiangsu Province,ChinaProject(2019M650096)supported by China Postdoctoral Science Foundation。
文摘The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3Al-(1,2,3)Sn(wt.%)alloys were investigated by X-ray diffractometry(XRD),optical microscopy(OM),scanning electron microscopy(SEM)and tensile test.It is found that,as-cast Mg-8Li-3Al-(1,2,3)Sn alloys consist ofα-Mg+β-Li duplex matrix,MgLiAl2 and Li2Mg Sn phases.Increasing Sn content leads to grain refinement ofα-Mg dendrites and increase in content of Li2MgSn phase.During hot extrusion,complete dynamic recrystallization(DRX)takes place inβ-Li phase while incomplete DRX takes place inα-Mg phase.As Sn content is increased,the volume fraction of DRXedα-Mg grains is increased and the average grain size of DRXedα-Mg grains is decreased.Increasing Sn content is beneficial to strength but harmful to ductility for as-cast Mg-8Li-3Al-(1,2,3)Sn alloys.Tensile properties of Mg-8Li-3Al-(1,2,3)Sn alloys are improved significantly via hot extrusion and Mg-8Li-3Al-2Sn alloy exhibits the best tensile properties.
