When dealing with imbalanced datasets,the traditional support vectormachine(SVM)tends to produce a classification hyperplane that is biased towards the majority class,which exhibits poor robustness.This paper proposes...When dealing with imbalanced datasets,the traditional support vectormachine(SVM)tends to produce a classification hyperplane that is biased towards the majority class,which exhibits poor robustness.This paper proposes a high-performance classification algorithm specifically designed for imbalanced datasets.The proposed method first uses a biased second-order cone programming support vectormachine(B-SOCP-SVM)to identify the support vectors(SVs)and non-support vectors(NSVs)in the imbalanced data.Then,it applies the synthetic minority over-sampling technique(SV-SMOTE)to oversample the support vectors of the minority class and uses the random under-sampling technique(NSV-RUS)multiple times to undersample the non-support vectors of the majority class.Combining the above-obtained minority class data set withmultiple majority class datasets can obtainmultiple new balanced data sets.Finally,SOCP-SVM is used to classify each data set,and the final result is obtained through the integrated algorithm.Experimental results demonstrate that the proposed method performs excellently on imbalanced datasets.展开更多
Clustering, in data mining, is a useful technique for discovering interesting data distributions and patterns in the underlying data, and has many application fields, such as statistical data analysis, pattern recogni...Clustering, in data mining, is a useful technique for discovering interesting data distributions and patterns in the underlying data, and has many application fields, such as statistical data analysis, pattern recognition, image processing, and etc. We combine sampling technique with DBSCAN algorithm to cluster large spatial databases, and two sampling based DBSCAN (SDBSCAN) algorithms are developed. One algorithm introduces sampling technique inside DBSCAN, and the other uses sampling procedure outside DBSCAN. Experimental results demonstrate that our algorithms are effective and efficient in clustering large scale spatial databases.展开更多
For a class of non-uniform output sampling hybrid system with actuator faults and bounded disturbances,an iterative learning fault diagnosis algorithm is proposed.Firstly,in order to measure the impact of fault on sys...For a class of non-uniform output sampling hybrid system with actuator faults and bounded disturbances,an iterative learning fault diagnosis algorithm is proposed.Firstly,in order to measure the impact of fault on system between every consecutive output sampling instants,the actual fault function is transformed to obtain an equivalent fault model by using the integral mean value theorem,then the non-uniform sampling hybrid system is converted to continuous systems with timevarying delay based on the output delay method.Afterwards,an observer-based fault diagnosis filter with virtual fault is designed to estimate the equivalent fault,and the iterative learning regulation algorithm is chosen to update the virtual fault repeatedly to make it approximate the actual equivalent fault after some iterative learning trials,so the algorithm can detect and estimate the system faults adaptively.Simulation results of an electro-mechanical control system model with different types of faults illustrate the feasibility and effectiveness of this algorithm.展开更多
In order to prevent cracking appeared in the work-piece during the hot stamping operation,this paper proposes a hybrid optimization method based on Hammersley sequence sampling( HSS),finite analysis,backpropagation( B...In order to prevent cracking appeared in the work-piece during the hot stamping operation,this paper proposes a hybrid optimization method based on Hammersley sequence sampling( HSS),finite analysis,backpropagation( BP) neural network and genetic algorithm( GA). The mechanical properties of high strength boron steel are characterized on the basis of uniaxial tensile test at elevated temperatures. The samples of process parameters are chosen via the HSS that encourages the exploration throughout the design space and hence achieves better discovery of possible global optimum in the solution space. Meanwhile, numerical simulation is carried out to predict the forming quality for the optimized design. A BP neural network model is developed to obtain the mathematical relationship between optimization goal and design variables,and genetic algorithm is used to optimize the process parameters. Finally,the results of numerical simulation are compared with those of production experiment to demonstrate that the optimization strategy proposed in the paper is feasible.展开更多
Selection of negative samples significantly influences landslide susceptibility assessment,especially when establishing the relationship between landslides and environmental factors in regions with complex geological ...Selection of negative samples significantly influences landslide susceptibility assessment,especially when establishing the relationship between landslides and environmental factors in regions with complex geological conditions.Traditional sampling strategies commonly used in landslide susceptibility models can lead to a misrepresentation of the distribution of negative samples,causing a deviation from actual geological conditions.This,in turn,negatively affects the discriminative ability and generalization performance of the models.To address this issue,we propose a novel approach for selecting negative samples to enhance the quality of machine learning models.We choose the Liangshan Yi Autonomous Prefecture,located in southwestern Sichuan,China,as the case study.This area,characterized by complex terrain,frequent tectonic activities,and steep slope erosion,experiences recurrent landslides,making it an ideal setting for validating our proposed method.We calculate the contribution values of environmental factors using the relief algorithm to construct the feature space,apply the Target Space Exteriorization Sampling(TSES)method to select negative samples,calculate landslide probability values by Random Forest(RF)modeling,and then create regional landslide susceptibility maps.We evaluate the performance of the RF model optimized by the Environmental Factor Selection-based TSES(EFSTSES)method using standard performance metrics.The results indicated that the model achieved an accuracy(ACC)of 0.962,precision(PRE)of 0.961,and an area under the curve(AUC)of 0.962.These findings demonstrate that the EFSTSES-based model effectively mitigates the negative sample imbalance issue,enhances the differentiation between landslide and non-landslide samples,and reduces misclassification,particularly in geologically complex areas.These improvements offer valuable insights for disaster prevention,land use planning,and risk mitigation strategies.展开更多
Assessment of imprecise time-variant reliability in engineering is a critical task when accounting for both the variability of structural properties and loads over time and the presence of uncertainties involved in th...Assessment of imprecise time-variant reliability in engineering is a critical task when accounting for both the variability of structural properties and loads over time and the presence of uncertainties involved in the ambiguity of parameters simultaneously.To estimate the Imprecise Time-variant Failure Probability Function(ITFPF)and derive the imprecise reliability results as a byproduct,Adaptive Combination Augmented Line Sampling(ACALS)is proposed.It consists of three integrated features:Augmented Line Sampling(ALS),adaptive strategy,and the optimal combination.ALS is adopted as an efficient analysis tool to obtain the failure probability function w.r.t.imprecise parameters.Then,the adaptive strategy iteratively applies ALS while considering both imprecise parameters and time simultaneously.Finally,the optimal combination algorithm collects all result components in an optimal manner to minimize the Coefficient of Variance(C.o.V.)of the ITFPF estimate.Overall,the proposed ACALS method outperforms the original ALS method by efficiently estimating the ITFPF while guaranteeing a minimal C.o.V.Thus,the proposed approach can serve as an effective tool for imprecise time-variant reliability analysis in real engineering applications.Several examples are presented to demonstrate the superiority of the proposed approach in addressing the challenges of estimating the ITFPF.展开更多
We introduce the potential-decomposition strategy （PDS）, which can be used in Markov chain Monte Carlo sampling algorithms. PDS can be designed to make particles move in a modified potential that favors diffusion in...We introduce the potential-decomposition strategy （PDS）, which can be used in Markov chain Monte Carlo sampling algorithms. PDS can be designed to make particles move in a modified potential that favors diffusion in phase space, then, by rejecting some trial samples, the target distributions can be sampled in an unbiased manner. Furthermore, if the accepted trial samples are insumcient, they can be recycled as initial states to form more unbiased samples. This strategy can greatly improve efficiency when the original potential has multiple metastable states separated by large barriers. We apply PDS to the 2d Ising model and a double-well potential model with a large barrier, demonstrating in these two representative examples that convergence is accelerated by orders of magnitude.展开更多
Metropolis-Hastings algorithms are slowed down by the computation of complex target distributions. To solve this problem, one can use the delayed acceptance Metropolis-Hastings algorithm (MHDA) of Christen and Fox (20...Metropolis-Hastings algorithms are slowed down by the computation of complex target distributions. To solve this problem, one can use the delayed acceptance Metropolis-Hastings algorithm (MHDA) of Christen and Fox (2005). However, the acceptance rate of a proposed value will always be less than in the standard Metropolis-Hastings. We can fix this problem by using the Metropolis-Hastings algorithm with delayed rejection (MHDR) proposed by Tierney and Mira (1999). In this paper, we combine the ideas of MHDA and MHDR to propose a new MH algorithm, named the Metropolis-Hastings algorithm with delayed acceptance and rejection (MHDAR). The new algorithm reduces the computational cost by division of the prior or likelihood functions and increase the acceptance probability by delay rejection of the second stage. We illustrate those accelerating features by a realistic example.展开更多
AIM To detect blood withdrawal for patients with arterial blood pressure monitoring to increase patient safety and provide better sample dating.METHODS Blood pressure information obtained from a patient monitor was fe...AIM To detect blood withdrawal for patients with arterial blood pressure monitoring to increase patient safety and provide better sample dating.METHODS Blood pressure information obtained from a patient monitor was fed as a real-time data stream to an experimental medical framework. This framework was connected to an analytical application which observes changes in systolic, diastolic and mean pressure to determine anomalies in the continuous data stream. Detection was based on an increased mean blood pressure caused by the closing of the withdrawal three-way tap and an absence of systolic and diastolic measurements during this manipulation. For evaluation of the proposed algorithm, measured data from animal studies in healthy pigs were used.RESULTS Using this novel approach for processing real-time measurement data of arterial pressure monitoring, the exact time of blood withdrawal could be successfully detected retrospectively and in real-time. The algorithm was able to detect 422 of 434(97%) blood withdrawals for blood gas analysis in the retrospective analysis of 7 study trials. Additionally, 64 sampling events for other procedures like laboratory and activated clotting time analyses were detected. The proposed algorithm achieved a sensitivity of 0.97, a precision of 0.96 and an F1 score of 0.97.CONCLUSION Arterial blood pressure monitoring data can be used toperform an accurate identification of individual blood samplings in order to reduce sample mix-ups and thereby increase patient safety.展开更多
Surrogate models have shown to be effective in assisting evolutionary algorithms(EAs)for solving computationally expensive complex optimization problems.However,the effectiveness of the existing surrogate-assisted evo...Surrogate models have shown to be effective in assisting evolutionary algorithms(EAs)for solving computationally expensive complex optimization problems.However,the effectiveness of the existing surrogate-assisted evolutionary algorithms still needs to be improved.A data-driven evolutionary sampling optimization(DESO)framework is proposed,where at each generation it randomly employs one of two evolutionary sampling strategies,surrogate screening and surrogate local search based on historical data,to effectively balance global and local search.In DESO,the radial basis function(RBF)is used as the surrogate model in the sampling strategy,and different degrees of the evolutionary process are used to sample candidate points.The sampled points by sampling strategies are evaluated,and then added into the database for the updating surrogate model and population in the next sampling.To get the insight of DESO,extensive experiments and analysis of DESO have been performed.The proposed algorithm presents superior computational efficiency and robustness compared with five state-of-the-art algorithms on benchmark problems from 20 to 200 dimensions.Besides,DESO is applied to an airfoil design problem to show its effectiveness.展开更多
In this paper,four pattern recognition methods are set forth.Based on plane projection of samples and analysis of typical samples along with the few pattern recognition methods,the PTR algorithm for recognizing variou...In this paper,four pattern recognition methods are set forth.Based on plane projection of samples and analysis of typical samples along with the few pattern recognition methods,the PTR algorithm for recognizing various structure samples is proposed.Also two examples are given and these show the PTR algorithm is effective.展开更多
Coupling Bayes’Theorem with a two-dimensional(2D)groundwater solute advection-diffusion transport equation allows an inverse model to be established to identify a set of contamination source parameters including sour...Coupling Bayes’Theorem with a two-dimensional(2D)groundwater solute advection-diffusion transport equation allows an inverse model to be established to identify a set of contamination source parameters including source intensity(M),release location(0 X,0 Y)and release time(0 T),based on monitoring well data.To address the issues of insufficient monitoring wells or weak correlation between monitoring data and model parameters,a monitoring well design optimization approach was developed based on the Bayesian formula and information entropy.To demonstrate how the model works,an exemplar problem with an instantaneous release of a contaminant in a confined groundwater aquifer was employed.The information entropy of the model parameters posterior distribution was used as a criterion to evaluate the monitoring data quantity index.The optimal monitoring well position and monitoring frequency were solved by the two-step Monte Carlo method and differential evolution algorithm given a known well monitoring locations and monitoring events.Based on the optimized monitoring well position and sampling frequency,the contamination source was identified by an improved Metropolis algorithm using the Latin hypercube sampling approach.The case study results show that the following parameters were obtained:1)the optimal monitoring well position(D)is at(445,200);and 2)the optimal monitoring frequency(Δt)is 7,providing that the monitoring events is set as 5 times.Employing the optimized monitoring well position and frequency,the mean errors of inverse modeling results in source parameters(M,X0,Y0,T0)were 9.20%,0.25%,0.0061%,and 0.33%,respectively.The optimized monitoring well position and sampling frequency canIt was also learnt that the improved Metropolis-Hastings algorithm(a Markov chain Monte Carlo method)can make the inverse modeling result independent of the initial sampling points and achieves an overall optimization,which significantly improved the accuracy and numerical stability of the inverse modeling results.展开更多
In order to solve the problems of weak prediction stability and generalization ability of a neural network algorithm model in the yarn quality prediction research for small samples,a prediction model based on an AdaBo...In order to solve the problems of weak prediction stability and generalization ability of a neural network algorithm model in the yarn quality prediction research for small samples,a prediction model based on an AdaBoost algorithm(AdaBoost model) was established.A prediction model based on a linear regression algorithm(LR model) and a prediction model based on a multi-layer perceptron neural network algorithm(MLP model) were established for comparison.The prediction experiments of the yarn evenness and the yarn strength were implemented.Determination coefficients and prediction errors were used to evaluate the prediction accuracy of these models,and the K-fold cross validation was used to evaluate the generalization ability of these models.In the prediction experiments,the determination coefficient of the yarn evenness prediction result of the AdaBoost model is 76% and 87% higher than that of the LR model and the MLP model,respectively.The determination coefficient of the yarn strength prediction result of the AdaBoost model is slightly higher than that of the other two models.Considering that the yarn evenness dataset has a weaker linear relationship with the cotton dataset than that of the yarn strength dataset in this paper,the AdaBoost model has the best adaptability for the nonlinear dataset among the three models.In addition,the AdaBoost model shows generally better results in the cross-validation experiments and the series of prediction experiments at eight different training set sample sizes.It is proved that the AdaBoost model not only has good prediction accuracy but also has good prediction stability and generalization ability for small samples.展开更多
In airborne gamma ray spectrum processing,different analysis methods,technical requirements,analysis models,and calculation methods need to be established.To meet the engineering practice requirements of airborne gamm...In airborne gamma ray spectrum processing,different analysis methods,technical requirements,analysis models,and calculation methods need to be established.To meet the engineering practice requirements of airborne gamma-ray measurements and improve computational efficiency,an improved shuffled frog leaping algorithm-particle swarm optimization convolutional neural network(SFLA-PSO CNN)for large-sample quantitative analysis of airborne gamma-ray spectra is proposed herein.This method was used to train the weight of the neural network,optimize the structure of the network,delete redundant connections,and enable the neural network to acquire the capability of quantitative spectrum processing.In full-spectrum data processing,this method can perform the functions of energy spectrum peak searching and peak area calculations.After network training,the mean SNR and RMSE of the spectral lines were 31.27 and 2.75,respectively,satisfying the demand for noise reduction.To test the processing ability of the algorithm in large samples of airborne gamma spectra,this study considered the measured data from the Saihangaobi survey area as an example to conduct data spectral analysis.The results show that calculation of the single-peak area takes only 0.13~0.15 ms,and the average relative errors of the peak area in the U,Th,and K spectra are 3.11,9.50,and 6.18%,indicating the high processing efficiency and accuracy of this algorithm.The performance of the model can be further improved by optimizing related parameters,but it can already meet the requirements of practical engineering measurement.This study provides a new idea for the full-spectrum processing of airborne gamma rays.展开更多
Based on time delay technology and MUSIC algorithm, a novel estimating multiple frequencies approach of signal with sampling rate which is least Nyquist sampling rate is presented in this paper. With choosing delay ti...Based on time delay technology and MUSIC algorithm, a novel estimating multiple frequencies approach of signal with sampling rate which is least Nyquist sampling rate is presented in this paper. With choosing delay time properly, the estimated frequencies are unambiguous. Computer simulation confirms its availability.展开更多
A random walk Metropolis-Hastings algorithm has been widely used in sampling the parameter of spatial interaction in spatial autoregressive model from a Bayesian point of view. In addition, as an alternative approach,...A random walk Metropolis-Hastings algorithm has been widely used in sampling the parameter of spatial interaction in spatial autoregressive model from a Bayesian point of view. In addition, as an alternative approach, the griddy Gibbs sampler is proposed by [1] and utilized by [2]. This paper proposes an acceptance-rejection Metropolis-Hastings algorithm as a third approach, and compares these three algorithms through Monte Carlo experiments. The experimental results show that the griddy Gibbs sampler is the most efficient algorithm among the algorithms whether the number of observations is small or not in terms of the computation time and the inefficiency factors. Moreover, it seems to work well when the size of grid is 100.展开更多
The ocean bottom seismograph(OBS)is a powerful device deployed on the seafloor for acquiring marine seismic data,capable of detecting the multi-scale Earth’s interiors from submarine sediments to the mantle.Due to th...The ocean bottom seismograph(OBS)is a powerful device deployed on the seafloor for acquiring marine seismic data,capable of detecting the multi-scale Earth’s interiors from submarine sediments to the mantle.Due to the frequent use of free-fall deployment,it is challenging to accurately track its precise position.Additionally,the internal crystal oscillator clock of the OBS has limited accuracy,resulting in clock drift for long-term work on the seabed.To improve the reliability of OBS detections,it is crucial to calculate the precise OBS location and time correction.Focusing on accurately determining OBS position and timing,this study developed a positioning method that integrates time correction based on the Markov Chain Monte Carlo(MCMC)algorithm,utilizing travel times of direct water waves triggered by two-dimensional(2-D)shot lines or three-dimensional(3-D)airgun arrays.This newly developed method can simultaneously estimate accurate OBS location and time correction,incorporating bathymetric data into the inversion procedures to improve sampling efficiency and enhance the reliability of the final results.Synthetic tests with appropriate noise levels are performed independently to evaluate the feasibility and reliability of our method,indicating that it is robust enough to determine OBS location and time correction precisely.Finally,we use travel-time data recorded at three OBSs deployed in the Southwest Indian Ridge to relocate locations and calculate time corrections.The results exhibit high consistency when using 2-D and 3-D shot data,indicating that high-resolution bathymetric data plays a fingerprint role in inversion to evaluate precise OBS location and time correction.展开更多
Traditional sampling-based path planning algorithms,such as the rapidly-exploring random tree star(RRT^(*)),encounter critical limitations in unstructured orchard environments,including low sampling efficiency in narr...Traditional sampling-based path planning algorithms,such as the rapidly-exploring random tree star(RRT^(*)),encounter critical limitations in unstructured orchard environments,including low sampling efficiency in narrow passages,slow convergence,and high computational costs.To address these challenges,this paper proposes a novel hybrid global path planning algorithm integrating Gaussian sampling and quadtree optimization(RRT^(*)-GSQ).This methodology aims to enhance path planning by synergistically combining a Gaussian mixture sampling strategy to improve node generation in critical regions,an adaptive step-size and direction optimization mechanism for enhanced obstacle avoidance,a Quadtree-AABB collision detection framework to lower computational complexity,and a dynamic iteration control strategy for more efficient convergence.In obstacle-free and obstructed scenarios,compared with the conventional RRT^(*),the proposed algorithm reduced the number of node evaluations by 67.57%and 62.72%,and decreased the search time by 79.72%and 78.52%,respectively.In path tracking tests,the proposed algorithm achieved substantial reductions in RMSE of the final path compared to the conventional RRT^(*).Specifically,the lateral RMSE was reduced by 41.5%in obstacle-free environments and 59.3%in obstructed environments,while the longitudinal RMSE was reduced by 57.2%and 58.5%,respectively.Furthermore,the maximum absolute errors in both lateral and longitudinal directions were constrained within 0.75 m.Field validation experiments in an operational orchard confirmed the algorithm's practical effectiveness,showing reductions in the mean tracking error of 47.6%(obstacle-free)and 58.3%(with obstructed),alongside a 5.1%and 7.2%shortening of the path length compared to the baseline method.The proposed algorithm effectively enhances path planning efficiency and navigation accuracy for robots,presenting a superior solution for high-precision autonomous navigation of agricultural robots in orchard environments and holding significant value for engineering applications.展开更多
Time division multiplexing(TDM)architecture is an important approach to creating sensor arrays for massive scale monitoring.But it is paradoxical for the TDM interferometric sensor array to keep a short delay fiber fo...Time division multiplexing(TDM)architecture is an important approach to creating sensor arrays for massive scale monitoring.But it is paradoxical for the TDM interferometric sensor array to keep a short delay fiber for high sensing resolution and meanwhile use low sampling rate for practical applications.In this paper,a phase matching sampling(PMS)paradigm is proposed to address the above contradiction.By matching the phase of the sampling clock with the delay fiber length,combining with multiple-pulses sampling strategy,the proposed PMS method can avoid collecting the redundant information,facilitating the decreasing of sampling rate as well as delay fiber length of the TDM sensing system.The proof-of-concept experiments on an 8-channel TDM interferometric system demonstrate that when the sampling rate is fixed at 20 MS/s,by applying the PMS algorithm,the delay fiber length can be shortened from 100 m to 1 m,compared with applying the conventional sampling method.It reduced the phase noise of the system by a factor of 10 at 1 mHz and by a factor of 50 at 1 Hz.The PMS algorithm for greatly reducing the sampling rate is expected to fuel the TDM interferometric sensor arrays for many applications.展开更多
基金supported by the Natural Science Basic Research Program of Shaanxi(Program No.2024JC-YBMS-026).
文摘When dealing with imbalanced datasets,the traditional support vectormachine(SVM)tends to produce a classification hyperplane that is biased towards the majority class,which exhibits poor robustness.This paper proposes a high-performance classification algorithm specifically designed for imbalanced datasets.The proposed method first uses a biased second-order cone programming support vectormachine(B-SOCP-SVM)to identify the support vectors(SVs)and non-support vectors(NSVs)in the imbalanced data.Then,it applies the synthetic minority over-sampling technique(SV-SMOTE)to oversample the support vectors of the minority class and uses the random under-sampling technique(NSV-RUS)multiple times to undersample the non-support vectors of the majority class.Combining the above-obtained minority class data set withmultiple majority class datasets can obtainmultiple new balanced data sets.Finally,SOCP-SVM is used to classify each data set,and the final result is obtained through the integrated algorithm.Experimental results demonstrate that the proposed method performs excellently on imbalanced datasets.
基金Supported by the Open Researches Fund Program of L IESMARS(WKL(0 0 ) 0 30 2 )
文摘Clustering, in data mining, is a useful technique for discovering interesting data distributions and patterns in the underlying data, and has many application fields, such as statistical data analysis, pattern recognition, image processing, and etc. We combine sampling technique with DBSCAN algorithm to cluster large spatial databases, and two sampling based DBSCAN (SDBSCAN) algorithms are developed. One algorithm introduces sampling technique inside DBSCAN, and the other uses sampling procedure outside DBSCAN. Experimental results demonstrate that our algorithms are effective and efficient in clustering large scale spatial databases.
基金supported by the National Natural Science Foundation of China(61273070,61203092)the Enterprise-college-institute Cooperative Project of Jiangsu Province(BY2015019-21)+1 种基金111 Project(B12018)the Fun-damental Research Funds for the Central Universities(JUSRP51733B)
文摘For a class of non-uniform output sampling hybrid system with actuator faults and bounded disturbances,an iterative learning fault diagnosis algorithm is proposed.Firstly,in order to measure the impact of fault on system between every consecutive output sampling instants,the actual fault function is transformed to obtain an equivalent fault model by using the integral mean value theorem,then the non-uniform sampling hybrid system is converted to continuous systems with timevarying delay based on the output delay method.Afterwards,an observer-based fault diagnosis filter with virtual fault is designed to estimate the equivalent fault,and the iterative learning regulation algorithm is chosen to update the virtual fault repeatedly to make it approximate the actual equivalent fault after some iterative learning trials,so the algorithm can detect and estimate the system faults adaptively.Simulation results of an electro-mechanical control system model with different types of faults illustrate the feasibility and effectiveness of this algorithm.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.CDJZR14130006)
文摘In order to prevent cracking appeared in the work-piece during the hot stamping operation,this paper proposes a hybrid optimization method based on Hammersley sequence sampling( HSS),finite analysis,backpropagation( BP) neural network and genetic algorithm( GA). The mechanical properties of high strength boron steel are characterized on the basis of uniaxial tensile test at elevated temperatures. The samples of process parameters are chosen via the HSS that encourages the exploration throughout the design space and hence achieves better discovery of possible global optimum in the solution space. Meanwhile, numerical simulation is carried out to predict the forming quality for the optimized design. A BP neural network model is developed to obtain the mathematical relationship between optimization goal and design variables,and genetic algorithm is used to optimize the process parameters. Finally,the results of numerical simulation are compared with those of production experiment to demonstrate that the optimization strategy proposed in the paper is feasible.
基金supported by Natural Science Research Project of Anhui Educational Committee(2023AH030041)National Natural Science Foundation of China(42277136)Anhui Province Young and Middle-aged Teacher Training Action Project(DTR2023018).
文摘Selection of negative samples significantly influences landslide susceptibility assessment,especially when establishing the relationship between landslides and environmental factors in regions with complex geological conditions.Traditional sampling strategies commonly used in landslide susceptibility models can lead to a misrepresentation of the distribution of negative samples,causing a deviation from actual geological conditions.This,in turn,negatively affects the discriminative ability and generalization performance of the models.To address this issue,we propose a novel approach for selecting negative samples to enhance the quality of machine learning models.We choose the Liangshan Yi Autonomous Prefecture,located in southwestern Sichuan,China,as the case study.This area,characterized by complex terrain,frequent tectonic activities,and steep slope erosion,experiences recurrent landslides,making it an ideal setting for validating our proposed method.We calculate the contribution values of environmental factors using the relief algorithm to construct the feature space,apply the Target Space Exteriorization Sampling(TSES)method to select negative samples,calculate landslide probability values by Random Forest(RF)modeling,and then create regional landslide susceptibility maps.We evaluate the performance of the RF model optimized by the Environmental Factor Selection-based TSES(EFSTSES)method using standard performance metrics.The results indicated that the model achieved an accuracy(ACC)of 0.962,precision(PRE)of 0.961,and an area under the curve(AUC)of 0.962.These findings demonstrate that the EFSTSES-based model effectively mitigates the negative sample imbalance issue,enhances the differentiation between landslide and non-landslide samples,and reduces misclassification,particularly in geologically complex areas.These improvements offer valuable insights for disaster prevention,land use planning,and risk mitigation strategies.
基金The Aeronautical Science Foundation of China(Nos.20170968002,20230003068002)The National Major Science and Technology Projects of China(Nos.J2019-II-0022-0043,J2019-VII-0013-0153).
文摘Assessment of imprecise time-variant reliability in engineering is a critical task when accounting for both the variability of structural properties and loads over time and the presence of uncertainties involved in the ambiguity of parameters simultaneously.To estimate the Imprecise Time-variant Failure Probability Function(ITFPF)and derive the imprecise reliability results as a byproduct,Adaptive Combination Augmented Line Sampling(ACALS)is proposed.It consists of three integrated features:Augmented Line Sampling(ALS),adaptive strategy,and the optimal combination.ALS is adopted as an efficient analysis tool to obtain the failure probability function w.r.t.imprecise parameters.Then,the adaptive strategy iteratively applies ALS while considering both imprecise parameters and time simultaneously.Finally,the optimal combination algorithm collects all result components in an optimal manner to minimize the Coefficient of Variance(C.o.V.)of the ITFPF estimate.Overall,the proposed ACALS method outperforms the original ALS method by efficiently estimating the ITFPF while guaranteeing a minimal C.o.V.Thus,the proposed approach can serve as an effective tool for imprecise time-variant reliability analysis in real engineering applications.Several examples are presented to demonstrate the superiority of the proposed approach in addressing the challenges of estimating the ITFPF.
基金Supported by the National Natural Science Foundation of China under Grant Nos.10674016,10875013the Specialized Research Foundation for the Doctoral Program of Higher Education under Grant No.20080027005
文摘We introduce the potential-decomposition strategy （PDS）, which can be used in Markov chain Monte Carlo sampling algorithms. PDS can be designed to make particles move in a modified potential that favors diffusion in phase space, then, by rejecting some trial samples, the target distributions can be sampled in an unbiased manner. Furthermore, if the accepted trial samples are insumcient, they can be recycled as initial states to form more unbiased samples. This strategy can greatly improve efficiency when the original potential has multiple metastable states separated by large barriers. We apply PDS to the 2d Ising model and a double-well potential model with a large barrier, demonstrating in these two representative examples that convergence is accelerated by orders of magnitude.
文摘Metropolis-Hastings algorithms are slowed down by the computation of complex target distributions. To solve this problem, one can use the delayed acceptance Metropolis-Hastings algorithm (MHDA) of Christen and Fox (2005). However, the acceptance rate of a proposed value will always be less than in the standard Metropolis-Hastings. We can fix this problem by using the Metropolis-Hastings algorithm with delayed rejection (MHDR) proposed by Tierney and Mira (1999). In this paper, we combine the ideas of MHDA and MHDR to propose a new MH algorithm, named the Metropolis-Hastings algorithm with delayed acceptance and rejection (MHDAR). The new algorithm reduces the computational cost by division of the prior or likelihood functions and increase the acceptance probability by delay rejection of the second stage. We illustrate those accelerating features by a realistic example.
文摘AIM To detect blood withdrawal for patients with arterial blood pressure monitoring to increase patient safety and provide better sample dating.METHODS Blood pressure information obtained from a patient monitor was fed as a real-time data stream to an experimental medical framework. This framework was connected to an analytical application which observes changes in systolic, diastolic and mean pressure to determine anomalies in the continuous data stream. Detection was based on an increased mean blood pressure caused by the closing of the withdrawal three-way tap and an absence of systolic and diastolic measurements during this manipulation. For evaluation of the proposed algorithm, measured data from animal studies in healthy pigs were used.RESULTS Using this novel approach for processing real-time measurement data of arterial pressure monitoring, the exact time of blood withdrawal could be successfully detected retrospectively and in real-time. The algorithm was able to detect 422 of 434(97%) blood withdrawals for blood gas analysis in the retrospective analysis of 7 study trials. Additionally, 64 sampling events for other procedures like laboratory and activated clotting time analyses were detected. The proposed algorithm achieved a sensitivity of 0.97, a precision of 0.96 and an F1 score of 0.97.CONCLUSION Arterial blood pressure monitoring data can be used toperform an accurate identification of individual blood samplings in order to reduce sample mix-ups and thereby increase patient safety.
基金supported by the National Natural Science Foundation of China(62076225,62073300)the Natural Science Foundation for Distinguished Young Scholars of Hubei(2019CFA081)the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(CUGGC03).
文摘Surrogate models have shown to be effective in assisting evolutionary algorithms(EAs)for solving computationally expensive complex optimization problems.However,the effectiveness of the existing surrogate-assisted evolutionary algorithms still needs to be improved.A data-driven evolutionary sampling optimization(DESO)framework is proposed,where at each generation it randomly employs one of two evolutionary sampling strategies,surrogate screening and surrogate local search based on historical data,to effectively balance global and local search.In DESO,the radial basis function(RBF)is used as the surrogate model in the sampling strategy,and different degrees of the evolutionary process are used to sample candidate points.The sampled points by sampling strategies are evaluated,and then added into the database for the updating surrogate model and population in the next sampling.To get the insight of DESO,extensive experiments and analysis of DESO have been performed.The proposed algorithm presents superior computational efficiency and robustness compared with five state-of-the-art algorithms on benchmark problems from 20 to 200 dimensions.Besides,DESO is applied to an airfoil design problem to show its effectiveness.
文摘In this paper,four pattern recognition methods are set forth.Based on plane projection of samples and analysis of typical samples along with the few pattern recognition methods,the PTR algorithm for recognizing various structure samples is proposed.Also two examples are given and these show the PTR algorithm is effective.
基金This work was supported by Major Science and Technology Program for Water Pollution Control and Treatment(No.2015ZX07406005)Also thanks to the National Natural Science Foundation of China(No.41430643 and No.51774270)the National Key Research&Development Plan(No.2016YFC0501109).
文摘Coupling Bayes’Theorem with a two-dimensional(2D)groundwater solute advection-diffusion transport equation allows an inverse model to be established to identify a set of contamination source parameters including source intensity(M),release location(0 X,0 Y)and release time(0 T),based on monitoring well data.To address the issues of insufficient monitoring wells or weak correlation between monitoring data and model parameters,a monitoring well design optimization approach was developed based on the Bayesian formula and information entropy.To demonstrate how the model works,an exemplar problem with an instantaneous release of a contaminant in a confined groundwater aquifer was employed.The information entropy of the model parameters posterior distribution was used as a criterion to evaluate the monitoring data quantity index.The optimal monitoring well position and monitoring frequency were solved by the two-step Monte Carlo method and differential evolution algorithm given a known well monitoring locations and monitoring events.Based on the optimized monitoring well position and sampling frequency,the contamination source was identified by an improved Metropolis algorithm using the Latin hypercube sampling approach.The case study results show that the following parameters were obtained:1)the optimal monitoring well position(D)is at(445,200);and 2)the optimal monitoring frequency(Δt)is 7,providing that the monitoring events is set as 5 times.Employing the optimized monitoring well position and frequency,the mean errors of inverse modeling results in source parameters(M,X0,Y0,T0)were 9.20%,0.25%,0.0061%,and 0.33%,respectively.The optimized monitoring well position and sampling frequency canIt was also learnt that the improved Metropolis-Hastings algorithm(a Markov chain Monte Carlo method)can make the inverse modeling result independent of the initial sampling points and achieves an overall optimization,which significantly improved the accuracy and numerical stability of the inverse modeling results.
文摘In order to solve the problems of weak prediction stability and generalization ability of a neural network algorithm model in the yarn quality prediction research for small samples,a prediction model based on an AdaBoost algorithm(AdaBoost model) was established.A prediction model based on a linear regression algorithm(LR model) and a prediction model based on a multi-layer perceptron neural network algorithm(MLP model) were established for comparison.The prediction experiments of the yarn evenness and the yarn strength were implemented.Determination coefficients and prediction errors were used to evaluate the prediction accuracy of these models,and the K-fold cross validation was used to evaluate the generalization ability of these models.In the prediction experiments,the determination coefficient of the yarn evenness prediction result of the AdaBoost model is 76% and 87% higher than that of the LR model and the MLP model,respectively.The determination coefficient of the yarn strength prediction result of the AdaBoost model is slightly higher than that of the other two models.Considering that the yarn evenness dataset has a weaker linear relationship with the cotton dataset than that of the yarn strength dataset in this paper,the AdaBoost model has the best adaptability for the nonlinear dataset among the three models.In addition,the AdaBoost model shows generally better results in the cross-validation experiments and the series of prediction experiments at eight different training set sample sizes.It is proved that the AdaBoost model not only has good prediction accuracy but also has good prediction stability and generalization ability for small samples.
基金the National Natural Science Foundation of China(No.42127807)Natural Science Foundation of Sichuan Province(Nos.23NSFSCC0116 and 2022NSFSC12333)the Nuclear Energy Development Project(No.[2021]-88).
文摘In airborne gamma ray spectrum processing,different analysis methods,technical requirements,analysis models,and calculation methods need to be established.To meet the engineering practice requirements of airborne gamma-ray measurements and improve computational efficiency,an improved shuffled frog leaping algorithm-particle swarm optimization convolutional neural network(SFLA-PSO CNN)for large-sample quantitative analysis of airborne gamma-ray spectra is proposed herein.This method was used to train the weight of the neural network,optimize the structure of the network,delete redundant connections,and enable the neural network to acquire the capability of quantitative spectrum processing.In full-spectrum data processing,this method can perform the functions of energy spectrum peak searching and peak area calculations.After network training,the mean SNR and RMSE of the spectral lines were 31.27 and 2.75,respectively,satisfying the demand for noise reduction.To test the processing ability of the algorithm in large samples of airborne gamma spectra,this study considered the measured data from the Saihangaobi survey area as an example to conduct data spectral analysis.The results show that calculation of the single-peak area takes only 0.13~0.15 ms,and the average relative errors of the peak area in the U,Th,and K spectra are 3.11,9.50,and 6.18%,indicating the high processing efficiency and accuracy of this algorithm.The performance of the model can be further improved by optimizing related parameters,but it can already meet the requirements of practical engineering measurement.This study provides a new idea for the full-spectrum processing of airborne gamma rays.
文摘Based on time delay technology and MUSIC algorithm, a novel estimating multiple frequencies approach of signal with sampling rate which is least Nyquist sampling rate is presented in this paper. With choosing delay time properly, the estimated frequencies are unambiguous. Computer simulation confirms its availability.
文摘A random walk Metropolis-Hastings algorithm has been widely used in sampling the parameter of spatial interaction in spatial autoregressive model from a Bayesian point of view. In addition, as an alternative approach, the griddy Gibbs sampler is proposed by [1] and utilized by [2]. This paper proposes an acceptance-rejection Metropolis-Hastings algorithm as a third approach, and compares these three algorithms through Monte Carlo experiments. The experimental results show that the griddy Gibbs sampler is the most efficient algorithm among the algorithms whether the number of observations is small or not in terms of the computation time and the inefficiency factors. Moreover, it seems to work well when the size of grid is 100.
基金The National Key Research and Development Program of China under contract No.2021YFC3101404the National Natural Science Foundation of China under contract Nos 42106068,42376052,42276064 and 42276075+1 种基金the Foundation of State Key Laboratory of Submarine Geoscience under contract No.sglkfkt2025-2the Zhejiang Provincial Natural Science Foundation of China under contract No.LZ23D060004.
文摘The ocean bottom seismograph(OBS)is a powerful device deployed on the seafloor for acquiring marine seismic data,capable of detecting the multi-scale Earth’s interiors from submarine sediments to the mantle.Due to the frequent use of free-fall deployment,it is challenging to accurately track its precise position.Additionally,the internal crystal oscillator clock of the OBS has limited accuracy,resulting in clock drift for long-term work on the seabed.To improve the reliability of OBS detections,it is crucial to calculate the precise OBS location and time correction.Focusing on accurately determining OBS position and timing,this study developed a positioning method that integrates time correction based on the Markov Chain Monte Carlo(MCMC)algorithm,utilizing travel times of direct water waves triggered by two-dimensional(2-D)shot lines or three-dimensional(3-D)airgun arrays.This newly developed method can simultaneously estimate accurate OBS location and time correction,incorporating bathymetric data into the inversion procedures to improve sampling efficiency and enhance the reliability of the final results.Synthetic tests with appropriate noise levels are performed independently to evaluate the feasibility and reliability of our method,indicating that it is robust enough to determine OBS location and time correction precisely.Finally,we use travel-time data recorded at three OBSs deployed in the Southwest Indian Ridge to relocate locations and calculate time corrections.The results exhibit high consistency when using 2-D and 3-D shot data,indicating that high-resolution bathymetric data plays a fingerprint role in inversion to evaluate precise OBS location and time correction.
基金National Natural Science Foundation of China(32301712)Natural Science Foundation of Jiangsu Province(BK20230548+3 种基金BK20250876)Project of Faculty of Agricultural Equipment of Jiangsu University(NGXB20240203)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD-2023-87)Open Funding Project of the Key Laboratory of Modern Agricultural Equipment and Technology(Jiangsu University),Ministry of Education(MAET202101)。
文摘Traditional sampling-based path planning algorithms,such as the rapidly-exploring random tree star(RRT^(*)),encounter critical limitations in unstructured orchard environments,including low sampling efficiency in narrow passages,slow convergence,and high computational costs.To address these challenges,this paper proposes a novel hybrid global path planning algorithm integrating Gaussian sampling and quadtree optimization(RRT^(*)-GSQ).This methodology aims to enhance path planning by synergistically combining a Gaussian mixture sampling strategy to improve node generation in critical regions,an adaptive step-size and direction optimization mechanism for enhanced obstacle avoidance,a Quadtree-AABB collision detection framework to lower computational complexity,and a dynamic iteration control strategy for more efficient convergence.In obstacle-free and obstructed scenarios,compared with the conventional RRT^(*),the proposed algorithm reduced the number of node evaluations by 67.57%and 62.72%,and decreased the search time by 79.72%and 78.52%,respectively.In path tracking tests,the proposed algorithm achieved substantial reductions in RMSE of the final path compared to the conventional RRT^(*).Specifically,the lateral RMSE was reduced by 41.5%in obstacle-free environments and 59.3%in obstructed environments,while the longitudinal RMSE was reduced by 57.2%and 58.5%,respectively.Furthermore,the maximum absolute errors in both lateral and longitudinal directions were constrained within 0.75 m.Field validation experiments in an operational orchard confirmed the algorithm's practical effectiveness,showing reductions in the mean tracking error of 47.6%(obstacle-free)and 58.3%(with obstructed),alongside a 5.1%and 7.2%shortening of the path length compared to the baseline method.The proposed algorithm effectively enhances path planning efficiency and navigation accuracy for robots,presenting a superior solution for high-precision autonomous navigation of agricultural robots in orchard environments and holding significant value for engineering applications.
基金financial supports from Ministry of Science and Technology of the People’s Republic of China under Grant(No.2022YFC2203904)in part by Open Projects Foundation under Grant of State Key Laboratory of Optical Fiber and Cable Manufacture Technology(YOFC)(No.SKLD2306).
文摘Time division multiplexing(TDM)architecture is an important approach to creating sensor arrays for massive scale monitoring.But it is paradoxical for the TDM interferometric sensor array to keep a short delay fiber for high sensing resolution and meanwhile use low sampling rate for practical applications.In this paper,a phase matching sampling(PMS)paradigm is proposed to address the above contradiction.By matching the phase of the sampling clock with the delay fiber length,combining with multiple-pulses sampling strategy,the proposed PMS method can avoid collecting the redundant information,facilitating the decreasing of sampling rate as well as delay fiber length of the TDM sensing system.The proof-of-concept experiments on an 8-channel TDM interferometric system demonstrate that when the sampling rate is fixed at 20 MS/s,by applying the PMS algorithm,the delay fiber length can be shortened from 100 m to 1 m,compared with applying the conventional sampling method.It reduced the phase noise of the system by a factor of 10 at 1 mHz and by a factor of 50 at 1 Hz.The PMS algorithm for greatly reducing the sampling rate is expected to fuel the TDM interferometric sensor arrays for many applications.
