Compatibilization is crucial for the blending of immiscible polymers to develop high-performance composites;however,traditional compatibilization by copolymers(pre-made or in-situ generation)suffers from weak interfac...Compatibilization is crucial for the blending of immiscible polymers to develop high-performance composites;however,traditional compatibilization by copolymers(pre-made or in-situ generation)suffers from weak interface anchoring,and inorganic particles have gained extensive attention recently owing to their large interfacial desorption energy,while their low affinity to bulk components is a drawback.In this study,an interfacial atom transfer radical polymerization(ATRP)technique was employed to grow polystyrene(PS)and poly(2-hydroxyethyl methacrylate)(PHEMA)simultaneously on different hemispheres of Br-functionalized SiO_(2) nanoparticles to stabilize a Pickering emulsion,whereby a brush-type Janus nanoparticle(SiO_(2)@JNP)was developed.The polymer brushes were well-characterized,and the Janus feature was validated by transmission electron microscope(TEM)observation of the sole hemisphere grafting of SiO_(2)-PS as a control sample.SiO_(2)@JNP was demonstrated to be an efficient compatibilizer for a PS/poly(methyl methacrylate)(PMMA)immiscible blend,and the droplet-matrix morphology was significantly refined.The mechanical strength and toughness of the blend were synchronously enhanced at a low content SiO_(2)@JNP optimized~0.9 wt%,with the tensile strength,elongation at break and impact strength increased by 17.7%,26.6%and 19.6%,respectively.This enhancement may be attributed to the entanglements between the grafted polymer brushes and individual components that improve the particle-bulk phase affinity and enforce interfacial adhesion.展开更多
Traditional biodiesel production primarily uses methanol as the acyl acceptor,but its toxicity to lipase increases process complexity and operational difficulty elevate manufacturing costs.This study aimed to explore ...Traditional biodiesel production primarily uses methanol as the acyl acceptor,but its toxicity to lipase increases process complexity and operational difficulty elevate manufacturing costs.This study aimed to explore a new method for enzymatic synthesis of biodiesel with methyl methacrylate(MMA)as acyl acceptor.Meanwhile,a 1,3-position specific lipase Lipozyme RM IM was applied as biocatalyst,which enables simultaneous production of biodiesel(FAMEs)and methacrylate fatty acid glycerides(MFAGs)via specific sn-1,3 transesterification of MMA with triglyceride.Under the optimal reaction conditions:temperature of 50℃,molar ratio of 4:1 for MMA to triglyceride,enzyme dosage of 7.5%(mass),and an extra water addition of 0.5%(mass);triglyceride conversion rate of 97%,and FAMEs yield of 65%could be obtained.Simultaneously,the multistage short-path distillation and column chromatographic method were combined used for the separation of the mixed products.Finally,the purity of FAME,MFADG,DMFAG,and MMFAG were 98%,97.8%,95.3%,and 81.78%,respectively.In this new approach,MMA demonstrates lower toxicity to lipases,allowing for straightfo rward addition of all the substrates without complex addition process,and enhancing operational feasibility.Meanwhile,the by-products of MFAGs could be applied as monomers in varnishes and protective coatings,which increased the value of the products.Thus,this investigation providing an alternative way to produce biodiesel,and providing a new pathway for the sustainable development of biodiesel.展开更多
Treating bone defects complicated by bacterial infections remains a significant clinical challenge.Drawing inspiration from the human body's bone repair mechanisms,the use of biomimetic methods to design tissue en...Treating bone defects complicated by bacterial infections remains a significant clinical challenge.Drawing inspiration from the human body's bone repair mechanisms,the use of biomimetic methods to design tissue engineering scaffolds is of great significance for bone repair.This study synthesized copper(Cu)-doped mesoporous silica nanoparticles(Cu@MSN)modified with hydroxyethyl methacrylate to obtain methacrylated Cu@MSN(Cu@MSNMA).Furtheremore,bio-mimetic nanocomposite hydrogels were prepared by adding Cu@MSNMA to a GelMA/gelatin solution.This hydrogel achieves multi-modal bone tissue biomimicry:(ⅰ)GelMA/gelatin mimics the matrix components in bone ECM,ensuring biocompatibility while promoting cellular behavior(such as adhesion,proliferation,and differentiation);(ⅱ)GelMA/gela-tin and the crosslinking sites introduced by Cu@MSNMA form a stable porous network structure,achieving structural and mechanical biomimicry to provide necessary support for bone defects;(ⅲ)The elemental biomimicry of Si and Cu in Cu@MSNMA achieves efficient osteogenic induction.The effect of different proportions of Cu@MSNMA on the physi-cal properties of the composite hydrogels was investigated to determine the optimal proportion.The results indicated that the mechanical properties of hydrogel were enhanced with the increasing Cu@MSNMA mass ratio.Notably,5%NPs/GelMA/gelatin hydrogel exhibited excellent mechanical property compared to the GelMA/gelatin hydrogel.In vitro and vivo cellular experiments demonstrated a significant enhancement in antibacterial and osteogenic induction with Cu@MSNMA addition.In conclusion,the proposed nanocomposite hydrogel with biomimetic components and ion-regulating properties can serve as a multifunctional scaffold,offering antimicrobial properties for infected bone regeneration,and guide for future research in bone regeneration and three-dimensional printing.展开更多
以自制的端硅烷基改性聚醚树脂(STPE)为主体制备了2种密封胶,第一种是掺杂少量的聚甲基丙烯酸甲酯(PMMA)树脂得到单组分PMMA改性STPE密封胶,第二种是以STPE组分与环氧树脂(EP)组分以不同配比配制得到一系列双组分STPE-EP密封胶。分别研...以自制的端硅烷基改性聚醚树脂(STPE)为主体制备了2种密封胶,第一种是掺杂少量的聚甲基丙烯酸甲酯(PMMA)树脂得到单组分PMMA改性STPE密封胶,第二种是以STPE组分与环氧树脂(EP)组分以不同配比配制得到一系列双组分STPE-EP密封胶。分别研究了PMMA用量和环氧树脂含量对密封胶固化物力学性能和热稳定性的影响。结果表明,当掺入1 g PMMA(相对于25 g STPE)时,改性密封胶的力学性能最优,胶膜最大拉伸强度为2.12 MPa,最大剪切强度为2.34 MPa;当STPE聚合物与环氧树脂形成A、B组分质量比为2∶1的双组分体系时,密封胶胶膜的最大拉伸强度为1.86 MPa,但断裂伸长率只有30.2%。展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.22172028,21903015,and 22403017)Natural Science Foundation of Fujian Province of China(No.2022J05041)。
文摘Compatibilization is crucial for the blending of immiscible polymers to develop high-performance composites;however,traditional compatibilization by copolymers(pre-made or in-situ generation)suffers from weak interface anchoring,and inorganic particles have gained extensive attention recently owing to their large interfacial desorption energy,while their low affinity to bulk components is a drawback.In this study,an interfacial atom transfer radical polymerization(ATRP)technique was employed to grow polystyrene(PS)and poly(2-hydroxyethyl methacrylate)(PHEMA)simultaneously on different hemispheres of Br-functionalized SiO_(2) nanoparticles to stabilize a Pickering emulsion,whereby a brush-type Janus nanoparticle(SiO_(2)@JNP)was developed.The polymer brushes were well-characterized,and the Janus feature was validated by transmission electron microscope(TEM)observation of the sole hemisphere grafting of SiO_(2)-PS as a control sample.SiO_(2)@JNP was demonstrated to be an efficient compatibilizer for a PS/poly(methyl methacrylate)(PMMA)immiscible blend,and the droplet-matrix morphology was significantly refined.The mechanical strength and toughness of the blend were synchronously enhanced at a low content SiO_(2)@JNP optimized~0.9 wt%,with the tensile strength,elongation at break and impact strength increased by 17.7%,26.6%and 19.6%,respectively.This enhancement may be attributed to the entanglements between the grafted polymer brushes and individual components that improve the particle-bulk phase affinity and enforce interfacial adhesion.
文摘Traditional biodiesel production primarily uses methanol as the acyl acceptor,but its toxicity to lipase increases process complexity and operational difficulty elevate manufacturing costs.This study aimed to explore a new method for enzymatic synthesis of biodiesel with methyl methacrylate(MMA)as acyl acceptor.Meanwhile,a 1,3-position specific lipase Lipozyme RM IM was applied as biocatalyst,which enables simultaneous production of biodiesel(FAMEs)and methacrylate fatty acid glycerides(MFAGs)via specific sn-1,3 transesterification of MMA with triglyceride.Under the optimal reaction conditions:temperature of 50℃,molar ratio of 4:1 for MMA to triglyceride,enzyme dosage of 7.5%(mass),and an extra water addition of 0.5%(mass);triglyceride conversion rate of 97%,and FAMEs yield of 65%could be obtained.Simultaneously,the multistage short-path distillation and column chromatographic method were combined used for the separation of the mixed products.Finally,the purity of FAME,MFADG,DMFAG,and MMFAG were 98%,97.8%,95.3%,and 81.78%,respectively.In this new approach,MMA demonstrates lower toxicity to lipases,allowing for straightfo rward addition of all the substrates without complex addition process,and enhancing operational feasibility.Meanwhile,the by-products of MFAGs could be applied as monomers in varnishes and protective coatings,which increased the value of the products.Thus,this investigation providing an alternative way to produce biodiesel,and providing a new pathway for the sustainable development of biodiesel.
基金National Key R&D Program of China(grant number 2022YFA1207500)National Natural Science Foundation of China(grant number 82072412).
文摘Treating bone defects complicated by bacterial infections remains a significant clinical challenge.Drawing inspiration from the human body's bone repair mechanisms,the use of biomimetic methods to design tissue engineering scaffolds is of great significance for bone repair.This study synthesized copper(Cu)-doped mesoporous silica nanoparticles(Cu@MSN)modified with hydroxyethyl methacrylate to obtain methacrylated Cu@MSN(Cu@MSNMA).Furtheremore,bio-mimetic nanocomposite hydrogels were prepared by adding Cu@MSNMA to a GelMA/gelatin solution.This hydrogel achieves multi-modal bone tissue biomimicry:(ⅰ)GelMA/gelatin mimics the matrix components in bone ECM,ensuring biocompatibility while promoting cellular behavior(such as adhesion,proliferation,and differentiation);(ⅱ)GelMA/gela-tin and the crosslinking sites introduced by Cu@MSNMA form a stable porous network structure,achieving structural and mechanical biomimicry to provide necessary support for bone defects;(ⅲ)The elemental biomimicry of Si and Cu in Cu@MSNMA achieves efficient osteogenic induction.The effect of different proportions of Cu@MSNMA on the physi-cal properties of the composite hydrogels was investigated to determine the optimal proportion.The results indicated that the mechanical properties of hydrogel were enhanced with the increasing Cu@MSNMA mass ratio.Notably,5%NPs/GelMA/gelatin hydrogel exhibited excellent mechanical property compared to the GelMA/gelatin hydrogel.In vitro and vivo cellular experiments demonstrated a significant enhancement in antibacterial and osteogenic induction with Cu@MSNMA addition.In conclusion,the proposed nanocomposite hydrogel with biomimetic components and ion-regulating properties can serve as a multifunctional scaffold,offering antimicrobial properties for infected bone regeneration,and guide for future research in bone regeneration and three-dimensional printing.
文摘以自制的端硅烷基改性聚醚树脂(STPE)为主体制备了2种密封胶,第一种是掺杂少量的聚甲基丙烯酸甲酯(PMMA)树脂得到单组分PMMA改性STPE密封胶,第二种是以STPE组分与环氧树脂(EP)组分以不同配比配制得到一系列双组分STPE-EP密封胶。分别研究了PMMA用量和环氧树脂含量对密封胶固化物力学性能和热稳定性的影响。结果表明,当掺入1 g PMMA(相对于25 g STPE)时,改性密封胶的力学性能最优,胶膜最大拉伸强度为2.12 MPa,最大剪切强度为2.34 MPa;当STPE聚合物与环氧树脂形成A、B组分质量比为2∶1的双组分体系时,密封胶胶膜的最大拉伸强度为1.86 MPa,但断裂伸长率只有30.2%。
