Electric vehicles are pivotal in the global shift toward decarbonizing road transport,with lithium-ion batteries at the heart of this technological evolution.However,the pursuit of batteries capable of extremely fast ...Electric vehicles are pivotal in the global shift toward decarbonizing road transport,with lithium-ion batteries at the heart of this technological evolution.However,the pursuit of batteries capable of extremely fast charging that also satisfy high energy and safety criteria,poses a significant challenge to current lithium-ion batteries technologies.Additionally,the increasing demand for aluminum(Al)and copper(Cu)in electrification,solar energy technologies,and vehicle light-eighting is driving these metals toward near-critical status in the medium term.This study introduces metalized polythylene terephthalate(mPET)polymer films by depositing an Al or Cu thin layer onto two sides of a polyethylene terephthalate film—named mPET/Al and mPET/Cu,as lightweight,cost-effective alternatives to traditional metal current collectors in lithium-ion batteries.We have fabricated current collectors that significantly reduce weight(by 73%),thickness(by 33%),and cost(by 85%)compared with traditional metal foil counterparts.These advancements have the potential to enhance energy density to 280 Wh kg^(-1) at the electrode level under 10-min charging at 6 C.Through testing,including a novel extremely fast charging protocol across various C-rates and long-term cycling(up to 1000 cycles)in different cell configurations,the superior performance of these metalized polymer films has been demonstrated.Notably,mPET/Cu and mPET/Al films exhibited comparable capacities to conventional cells under extremely fast charging,with the mPET cells showing a 27%improvement in energy density at 6 C and maintaining significant energy density after 1000 cycles.This study underscores the potential of mPET films to revolutionize the roll-to-roll battery manufacturing process and significantly advance the performance metrics of lithium-ion batteries in electric vehicles applications.展开更多
This paper concerns the homogenization problems for porous piezocomposites with infinitely thin metalized pore surfaces.To determine the effective properties,we used the effective moduli method and the finite element ...This paper concerns the homogenization problems for porous piezocomposites with infinitely thin metalized pore surfaces.To determine the effective properties,we used the effective moduli method and the finite element approaches,realized in the ANSYS package.As a simple model of the representative volume,we applied a unit cell of porous piezoceramic material in the form of a cube with one spherical pore.We modeled metallization by introducing an additional layer of material with very large permittivity coefficients along the pore boundary.Then we simulated the nonuniform polarization field around the pore.For taking this effect into account,we previously solved the electrostatic problem for a porous dielectric material with the same geometric structure.From this problem,we obtained the polarization field in the porous piezomaterial;after that,we modified the material properties of the finite elements from dielectric to piezoelectric with element coordinate systems whose corresponding axes rotated along the polarization vectors.As a result,we obtained the porous unit cell of an inhomogeneously polarized piezoceramic matrix.From the solutions of these homogenization problems,we observed that the examined porous piezoceramics composite with metalized pore boundaries has more extensive effective transverse and shear piezomoduli,and effective dielectric constants compared to the conventional porous piezoceramics.The analysis also showed that the effect of the polarization field inhomogeneity is insignificant on the ordinary porous piezoceramics;however,it is more significant on the porous piezoceramics with metalized pore surfaces.展开更多
39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.Ar...39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.ArcGIS inverse distance weight difference method was used to analyze the characteristics of pollution distribution,and single-factor pollution index,Nemerow comprehensive pollution index,ground accumulation index,and potential ecological risk index were selected to evaluate the characteristics of heavy metal pollution.Based on correlation analysis,the absolute principal component-multiple linear regression(APCS-MLR)and positive definite matrix factorization(PMF)models were used to analyze the sources of soil heavy metals.The results showed that the average concentrations of all eight heavy metals exceeded both national and Guangxi soil background values.Hg,Cd,and Zn exhibited high variation(greater than 0.5),indicating significant external disturbances,and their spatial distribution was closely related to mining activity locations.The single-factor pollution index evaluation indicated varying degrees of pollution risk for Cd,Zn,and As,with Cd and Zn being the most severe pollutants,as 69.23%and 30.77%of the samples fell into the moderate pollution or higher category.The geoaccumulation index analysis ranked the mean pollution levels of the eight elements as follows:Zn>Cd>Ni>Pb>Cu>Cr>Hg>As,with Cd and Zn showing the most severe contamination,and 51.28%of the samples exhibiting moderate or higher pollution levels.The Nemerow comprehensive pollution index evaluation showed that 74.35%of soil samples were classified as moderate to heavy pollution.The potential ecological risk index assessment indicated significant ecological risks posed by Cd and Zn,with 82.05%and 5.12%of the samples classified as causing strong to extreme ecological risks,respectively.The source apportionment analysis revealed minor differences between the two models.The APCS-MLR model identified three pollution sources and their contribution rates:anthropogenic mining sources(31.13%),parent material sources(40.38%),and unidentified sources(28.49%).The PMF model identified three pollution sources with contribution rates of anthropogenic mining sources(26.10%),parent material sources(46.96%),and a combined traffic and agricultural source(26.61%).Pb,Hg,Cd,and Zn mainly originated from mining activities;Cr,As,and Ni were primarily derived from the parent material,while Cu was predominantly attributed to traffic and agricultural sources.These findings provide a scientific basis for the prevention and control of heavy metal pollution in mining areas.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
T he residual stray magnetic fields present in ferromagnetic casting slabs were investigated in this work,which result from the magnetic fields generated during the steel casting process.Existing optical detection met...T he residual stray magnetic fields present in ferromagnetic casting slabs were investigated in this work,which result from the magnetic fields generated during the steel casting process.Existing optical detection methods face challenges owing to surface oxide scales,and conventional high-precision magnetic sensors are ineffective at high temperatures.To overcome these limitations,a small coil sensor was employed to measure the residual magnetism strength in oscillation traces,using metal magnetic memory and electromagnetic induction methods,which can carry out detection without an external excitation source.Using this technology,the proposed scheme successfully detects defects at high tempe-ratures(up to 670℃)without a cooling device.The key findings include the ability to detect both surface and near-surface defects,such as cracks and oscillation marks,with an enhanced signal-to-noise ratio(SNR)of 7.2 dB after signal processing.The method’s practicality was validated in a steel mill environment,where testing on casting slabs effectively detected defects,providing a foundation for improving industrial quality control.The proposed detection scheme offers a significant advancement in nondestructive testing(NDT)for high-temperature applications,contributing to more efficient and accurate monitoring of ferromagnetic material integrity.展开更多
Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellen...Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.展开更多
The Ni/SBA-15 catalysts were synthesized using the in situ method and the influence of crystallization temperature on nickel utilization efficiency-a critical factor in mesoporous material design-was systematically in...The Ni/SBA-15 catalysts were synthesized using the in situ method and the influence of crystallization temperature on nickel utilization efficiency-a critical factor in mesoporous material design-was systematically investigated.The structural characteristics and nickel anchoring capacity were analyzed using XRD,BET,FT-IR,H2-TPR,and ICP-OES.The results demonstrated that the crystallization temperature significantly affected the framework order of SBA-15 and the surface anchoring efficiency of Ni ions.The nickel utilization efficiency increased from 8.4%at 80℃ to 60.49%at 140℃,but then decreased to 47.25%at 160℃,indicating an optimal crystallization temperature window.This provides crucial guidance for tailoring high-performance metal-doped molecular sieves.The optimal catalyst exhibited excellent performance in the hydrogenation of 1,4-butynediol(BYD):the BYD conversion reached 97.25%with 88.99%selectivity of 1,4-butenediol(BED)within 5 h,and reached 99.73%with 87.34%selectivity of 1,4-butanediol(BDO)after 20 h reaction.These results revealed the critical role of crystallization temperature in metal utilization and provided theoretical support for designing highly active molecular sieve catalysts.展开更多
Aqueous zinc ion batteries(AZIBs)are considered promising candidates owing to their inherent safety and low cost.However,the conventional glass fiber(GF)separator used in AZIBs suffers from poor physicochemical proper...Aqueous zinc ion batteries(AZIBs)are considered promising candidates owing to their inherent safety and low cost.However,the conventional glass fiber(GF)separator used in AZIBs suffers from poor physicochemical properties,leading to uncontrolled zinc(Zn)dendrite formation and undesirable side reactions.To address these limitations and enhance the electrochemical performance of AZIBs,a precisely designed functional separator is developed by incorporating UiO-66-(COOH)_(2)into a poly(vinylidene fluoride)(PVDF)framework(U-PVDF)via a direct in situ growth method.This approach enables uniform distribution of UiO-66-(COOH)_(2)both on the surface and within the PVDF backbone,without increasing separator thickness.Owing to the strong interaction between Zn^(2+)and the abundant carboxyl groups in UiO-66-(COOH)_(2),the U-PVDF separator regulates the Zn^(2+)solvation structure toward a contact ion pair-dominated structure by reducing coordinated water molecules,which effectively mitigates water-induced parasitic reactions and promotes compact Zn deposition.Consequently,a Zn/Zn symmetric cell employing the U-PVDF separator demonstrates superior cycling stability over 1500 cycles without internal short-circuiting at a current density of 6 mA cm^(−2)and an areal capacity of 2 mAh cm^(−2).Moreover,Zn/NaV_(3)O_(8)·xH_(2)O(NVO)cell with the U-PVDF separator exhibits markedly improved cyclability and rate performance compared with those using conventional GF separator.展开更多
Vitamin D deficiency(VDD)represents a significant nutritional concern among children and adolescents.The estimated prevalence of VDD in China is 46.8%in this population^([1]).VDD during childhood and adolescence has b...Vitamin D deficiency(VDD)represents a significant nutritional concern among children and adolescents.The estimated prevalence of VDD in China is 46.8%in this population^([1]).VDD during childhood and adolescence has been associated with the onset of various conditions,including acute respiratory infections,asthma,atopic dermatitis,and food allergies^([2]).Multiple factors,including age,sun exposure,adiposity,and genetics,influence vitamin D levels^([2,3]).Increasing attention has been directed toward understanding the environmental determinants that may influence vitamin D status.Given the potential of metallic pollutants to disrupt endocrine function and their ubiquity in the environment,investigating the effects of metal exposure on human vitamin D status,particularly in vulnerable populations,is imperative.展开更多
Metal ion homeostasis plays a pivotal role in maintaining cellular functions,and its disruption can initiate regulated cell death pathways.Despite its therapeutic potential,metal ion therapy for breast cancer has been...Metal ion homeostasis plays a pivotal role in maintaining cellular functions,and its disruption can initiate regulated cell death pathways.Despite its therapeutic potential,metal ion therapy for breast cancer has been hampered by inefficient ion delivery and the intrinsic resistance mechanisms of cancer cells.In this work,a cuproptosis amplifier of copper-telaglenastat coordinate(denoted as Cu-CB) is developed to trigger cell ferroptosis for synergistic breast cancer treatment.Telaglenastat(CB-839),a glutaminase inhibitor,is identified as an effective copper ionophore that facilitates the formation of Cu-CB.Specially,Cu-CB can promote the aggregation of lipoylated proteins to initiate cuproptosis,while also inhibiting glutathione(GSH) synthesis and downregulating glutathione peroxidase 4(GPX4) to trigger ferroptosis.The interplay between these cuproptosis and apoptosis pathways,mediated by Cu-CB,significantly amplifies reactive oxygen species(ROS) production and lipid peroxidation,culminating in the synergistic suppression of breast cancer.Both in vitro and in vivo studies validate the superior antitumor effects of Cu-CB through the induction of cuproptosis and ferroptosis,which may provide a new insight for metal ion delivery systems and metal ion-based tumor therapies.展开更多
The recovery of precious metals(PMs)from secondary resources is critical for addressing global supply-chain vulnerabilities and sustainable resource utilization.This review systematically examines the transformative p...The recovery of precious metals(PMs)from secondary resources is critical for addressing global supply-chain vulnerabilities and sustainable resource utilization.This review systematically examines the transformative potential of metal-organic frameworks(MOFs)as next-generation adsorbents for PM recovery,focusing on their synthesis,functionalization,and multiscale adsorption mechanisms.We critically analyze conventional pyrometallurgical and hydrometallurgical methods and highlight their limitations in terms of selectivity,energy consumption,and secondary pollution.In contrast,MOFs offer tunable porosity,abundant active sites,and tunable surface chemistry,enabling efficient PM capture via synergistic physical and chemical adsorption.Advanced modification techniques,including direct synthesis and post-synthetic modification,are reviewed to propose strategies for enhancing the adsorption kinetics and selectivity for Au,Ag,Pt,and Pd.Key structure-property relationships are established through multiscale characterization and thermodynamic models,revealing the critical roles of hierarchical porosity,soft donor atoms,and framework stability.Industrial challenges,such as aqueous stability and scalability,are addressed via Zr-O bond strengthening,hydrophobic functionalization,and support immobilization.This study consolidates the experimental and theoretical advances in MOF-based PM recovery and provides a roadmap for translating laboratory innovations into practical applications within the circular-economy framework.展开更多
Heavy metal(HM)contamination severely impacts global agricultural production.HMs toxicity effectively damaged the physiological functions such as imbalanced redox homeostasis,altered antioxidant enzyme activity,damage...Heavy metal(HM)contamination severely impacts global agricultural production.HMs toxicity effectively damaged the physiological functions such as imbalanced redox homeostasis,altered antioxidant enzyme activity,damage root system architecture,hindered photosynthetic apparatus,cellular toxicity,restricted mineral accumulation,and changed the metabolite production.Using phytohormones may be a successful strategy for enhancing and stimulating plant tolerance to HMs toxicity without affecting the environment.Melatonin(MT),a novel plant growth regulator,and powerful antioxidant molecule,enhances plant resilience to HMs stress by enhancing seedling growth,protecting the photosynthetic system,increasing nutritional status,balanced redox homeostasis,and restricting HMs accumulation from root to shoot.In addition,MT enhances the activity of antioxidant enzymes and triggers the ascorbate-glutathione(AsA-GSH)cycle,which helps remove excessive ROS.MT improves RuBisCO activity to improve photosynthesis and reduce the breakdown of chlorophyll.To identify future research needs,it is crucial to understand the comprehensive and intricate regulatory mechanisms of exogenous and endogenous MT-mediated reduction of heavy metal toxicity in plants.Melatonin has several functions,and this review sheds light on those functions and the molecular processes by which it alleviates HMs toxicity.More research is needed to fully understand how melatonin affects plant tolerance to heavy metals stress.展开更多
Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results ...Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results were obtained.Firstly,at pressures lower than 53GPa,the opaque minerals still keep the unmelted state,while at 78 GPa and higher,FeNi metal and troilite form eutectic intergrowths occurring as disorderly fine veinlets filling the shock-induced fractures in silicate minerals.Secondly,single kamacite grains still maintain their contour at 12 GPa,but a part of brittle troilite grains was fragmented and squeezed into the shock-induced fractures within kamacite grains.At53 and 133 GPa,many more troilite fragments are poured in the kamacite interior to form disordered hybrid aggregates or to form squiggly strips,respectively.Similar phenomena are observed within single troilite grains,but the mineral squeezed into troilite grains is kamacite.Thirdly,chromite is a hard and refractory oxide mineral.When the shock pressure rises step by step from 12 to 133 GPa,the shock effect of chromite is only fragmentation.Its grain size decreases from tens of um at 53 GPa to a few um at 133 GPa.And,fourthly,native copper exhibits distinct redistribution behavior at high temperature.In Jilin samples shock-loaded to 12 GPa,copper initially located at troilite-kamacite interfaces partially transferred into small troilite grains containing fine FeNi particles.At 53 and 133 GPa,native copper preferentially transferred into larger troilite grains containing more particles of eutectic FeNi metal.展开更多
The surge in environmental pollution in recent years driven by numerous pollutants has necessitated the search for efficient removal methods.Phytoremediation is an eco-friendly technique that provides multiple benefit...The surge in environmental pollution in recent years driven by numerous pollutants has necessitated the search for efficient removal methods.Phytoremediation is an eco-friendly technique that provides multiple benefits over conventional methods of removing contaminants.Despite the numerous benefits of this technique,it has certain limitations that can be addressed by incorporating nanoparticles to improve its effectiveness.This review paper aims to explore the impact of heavy metal pollution on plants and human health.It highlights the role and mechanism of nanoparticles in enhancing phytoremediation,their application in the detection of heavy metals,and the strategies for the safe disposal of phytoremediation biomass.Biosynthesized nanoparticles are eco-friendly and non-toxic,with applications in biomedical and environmental fields.Nanoparticles can be used in the form of nano biosensors like smartphone-operated wireless sensors made from Cinnamomum camphora,enabling efficient detection of heavy metal ions.According to the studies,nanoparticles remove 80%–97%of heavy metals by various methods like reduction,precipitation,adsorption,etc.The phytoremediation biomass disposal can be done by heat treatment,phytomining,and microbial treatment with some modifications to further enhance their results.Phytoremediation is an environmentally friendly technique but requires further research and integration with biomass energy production to overcome scalability challenges and ensure safe biomass disposal.展开更多
We present a systematic investigation of the superconductivity in high-quality CsTi_(3)Bi_(5) single crystals by combining bulk property characterization and local-probe spectroscopy.Two successive superconducting tra...We present a systematic investigation of the superconductivity in high-quality CsTi_(3)Bi_(5) single crystals by combining bulk property characterization and local-probe spectroscopy.Two successive superconducting transitions are observed in this newly discovered kagome material.In the first stage,the diamagnetic response strengthens significantly from T_(c)~4.9 K to 4.6 K,followed by a broad transition below 4.6 K in the second stage.Moreover,different magnetic field dependences are observed for the two stages,where the first stage is field-insensitive while the second stage exhibits strong field dependence.The ultra-low magnetic field measurements indicate that the lower critical field H_(c1)(T)exhibits small anisotropy.Based on a comparative study of the superconducting state in CsBi2 and microscopic verification via scanning tunneling microscopy(STM),our results suggest the emergence of exotic and intrinsic superconductivity in this new titanium-based kagome superconductor,establishing it as a promising platform for further exploring the complexity of electronic states in the kagome lattice.展开更多
Ln@MOFs by anchoring rare metal ions(Ln) into metal-organic frameworks(MOFs) are proved to have great potential in the field of luminescent molecular thermometer.Nevertheless,the current research indicated that the po...Ln@MOFs by anchoring rare metal ions(Ln) into metal-organic frameworks(MOFs) are proved to have great potential in the field of luminescent molecular thermometer.Nevertheless,the current research indicated that the poor structural stability and low sensitivity hindered their application scope.In this work,a new MOF Zn-450 luminescent thermometer with multiple emission fluorescence characteristics was synthesized by the combination of 3,3,5,5-biphenyl tetracarboxylic acid(H_(4)L) and Zn^(2+) ion under solvothermal conditions.Interestingly,a high relative sensitivity of 1.43 % K^(-1) was found within 80-300 K based on Zn-450.Subsequently,two high-sensitivity luminescent Ln@MOFs(Ln = Eu and Tb) were further fabricated by doping rare earth ions into Zn-450 based on the post-synthesis strategy.Among them,the Eu@Zn-450 demonstrates various luminous behaviors while achieving an increased relative sensitivity of 1.63 % K^(-1).In addition,the continuously visible red,pink,and purple luminescent emissions at the same temperature range were observed,suggesting that the Eu@Zn-450 could be utilized as a luminescent colorimetric molecular thermometer.Importantly,this work can present new possibilities for the development of rare earth-doped luminescence and its temperature sensing properties.展开更多
We synthesized Ru_(1)Cu_(25)P_(7.5)/TiO_(2)catalyst using sodium borohydride(NaBH_(4))as reductant in a facile strategy.The highly dispersed RuCuP nanoclusters are anchored on the TiO_(2)surface with an average partic...We synthesized Ru_(1)Cu_(25)P_(7.5)/TiO_(2)catalyst using sodium borohydride(NaBH_(4))as reductant in a facile strategy.The highly dispersed RuCuP nanoclusters are anchored on the TiO_(2)surface with an average particle size of 2.62 nm.The catalyst shows excellent catalytic activity when applied to the hydrolysis of AB,which owns a high turnover frequency value of 531.56 mol_(H2)mol_(Ru)^(-1)min^(-1)and a low activation energy of 46.38 kJ·mol^(-1),it also exhibits good durability which maintains 61.13%initial activity after five cycles.The high catalytic performance of Ru_(1)Cu_(25)P_(7.5)/TiO_(2)may be attributed to the synergistic effects between Ru,Cu,and P elements,fine particle size,good dispersion,and the tight adhesion between nanoclusters and carrier.展开更多
To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,w...To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,we report a hollow-structured Ni_(x)Co_(1−x)O/Ni_(3)S_(2)/Co_(9)S_(8)heterostructure synthesized via sequential template-assisted growth,thermal oxidation,and controlled sulfidation process.The abundant bimetallic heterointerfaces not only provide additional active sites but also promote electronic modulation via charge redistribution.Additionally,the porous and hollow architecture enhances active surface area and mass transfer ability,thereby increasing the number of accessible active sites for alkaline OER.As a result,the prepared electrocatalyst achieves low overpotential of 310 mV at 10 mA cm^(−2)and small Tafel slope of 55.94 mV dec^(−1),demonstrating the exceptional electrocatalytic performance for alkaline OER.When integrated as the anode in an AEMWE cell,it delivers outstanding performance with only 1.657 V at 1.0 A cm^(−2)and reaches high current density of 5.0 A cm^(−2)at 1.989 V,surpassing those of commercial RuO_(2).The cell also shows excellent long-term durability over 100 h with minimal degradation.This study highlights the strong potential of rationally engineered oxide/sulfide heterostructures for next-generation alkaline water electrolysis.展开更多
文摘Electric vehicles are pivotal in the global shift toward decarbonizing road transport,with lithium-ion batteries at the heart of this technological evolution.However,the pursuit of batteries capable of extremely fast charging that also satisfy high energy and safety criteria,poses a significant challenge to current lithium-ion batteries technologies.Additionally,the increasing demand for aluminum(Al)and copper(Cu)in electrification,solar energy technologies,and vehicle light-eighting is driving these metals toward near-critical status in the medium term.This study introduces metalized polythylene terephthalate(mPET)polymer films by depositing an Al or Cu thin layer onto two sides of a polyethylene terephthalate film—named mPET/Al and mPET/Cu,as lightweight,cost-effective alternatives to traditional metal current collectors in lithium-ion batteries.We have fabricated current collectors that significantly reduce weight(by 73%),thickness(by 33%),and cost(by 85%)compared with traditional metal foil counterparts.These advancements have the potential to enhance energy density to 280 Wh kg^(-1) at the electrode level under 10-min charging at 6 C.Through testing,including a novel extremely fast charging protocol across various C-rates and long-term cycling(up to 1000 cycles)in different cell configurations,the superior performance of these metalized polymer films has been demonstrated.Notably,mPET/Cu and mPET/Al films exhibited comparable capacities to conventional cells under extremely fast charging,with the mPET cells showing a 27%improvement in energy density at 6 C and maintaining significant energy density after 1000 cycles.This study underscores the potential of mPET films to revolutionize the roll-to-roll battery manufacturing process and significantly advance the performance metrics of lithium-ion batteries in electric vehicles applications.
基金the framework of the RFBR project 16-58-48009 IND omi and DST.
文摘This paper concerns the homogenization problems for porous piezocomposites with infinitely thin metalized pore surfaces.To determine the effective properties,we used the effective moduli method and the finite element approaches,realized in the ANSYS package.As a simple model of the representative volume,we applied a unit cell of porous piezoceramic material in the form of a cube with one spherical pore.We modeled metallization by introducing an additional layer of material with very large permittivity coefficients along the pore boundary.Then we simulated the nonuniform polarization field around the pore.For taking this effect into account,we previously solved the electrostatic problem for a porous dielectric material with the same geometric structure.From this problem,we obtained the polarization field in the porous piezomaterial;after that,we modified the material properties of the finite elements from dielectric to piezoelectric with element coordinate systems whose corresponding axes rotated along the polarization vectors.As a result,we obtained the porous unit cell of an inhomogeneously polarized piezoceramic matrix.From the solutions of these homogenization problems,we observed that the examined porous piezoceramics composite with metalized pore boundaries has more extensive effective transverse and shear piezomoduli,and effective dielectric constants compared to the conventional porous piezoceramics.The analysis also showed that the effect of the polarization field inhomogeneity is insignificant on the ordinary porous piezoceramics;however,it is more significant on the porous piezoceramics with metalized pore surfaces.
文摘39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.ArcGIS inverse distance weight difference method was used to analyze the characteristics of pollution distribution,and single-factor pollution index,Nemerow comprehensive pollution index,ground accumulation index,and potential ecological risk index were selected to evaluate the characteristics of heavy metal pollution.Based on correlation analysis,the absolute principal component-multiple linear regression(APCS-MLR)and positive definite matrix factorization(PMF)models were used to analyze the sources of soil heavy metals.The results showed that the average concentrations of all eight heavy metals exceeded both national and Guangxi soil background values.Hg,Cd,and Zn exhibited high variation(greater than 0.5),indicating significant external disturbances,and their spatial distribution was closely related to mining activity locations.The single-factor pollution index evaluation indicated varying degrees of pollution risk for Cd,Zn,and As,with Cd and Zn being the most severe pollutants,as 69.23%and 30.77%of the samples fell into the moderate pollution or higher category.The geoaccumulation index analysis ranked the mean pollution levels of the eight elements as follows:Zn>Cd>Ni>Pb>Cu>Cr>Hg>As,with Cd and Zn showing the most severe contamination,and 51.28%of the samples exhibiting moderate or higher pollution levels.The Nemerow comprehensive pollution index evaluation showed that 74.35%of soil samples were classified as moderate to heavy pollution.The potential ecological risk index assessment indicated significant ecological risks posed by Cd and Zn,with 82.05%and 5.12%of the samples classified as causing strong to extreme ecological risks,respectively.The source apportionment analysis revealed minor differences between the two models.The APCS-MLR model identified three pollution sources and their contribution rates:anthropogenic mining sources(31.13%),parent material sources(40.38%),and unidentified sources(28.49%).The PMF model identified three pollution sources with contribution rates of anthropogenic mining sources(26.10%),parent material sources(46.96%),and a combined traffic and agricultural source(26.61%).Pb,Hg,Cd,and Zn mainly originated from mining activities;Cr,As,and Ni were primarily derived from the parent material,while Cu was predominantly attributed to traffic and agricultural sources.These findings provide a scientific basis for the prevention and control of heavy metal pollution in mining areas.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
文摘T he residual stray magnetic fields present in ferromagnetic casting slabs were investigated in this work,which result from the magnetic fields generated during the steel casting process.Existing optical detection methods face challenges owing to surface oxide scales,and conventional high-precision magnetic sensors are ineffective at high temperatures.To overcome these limitations,a small coil sensor was employed to measure the residual magnetism strength in oscillation traces,using metal magnetic memory and electromagnetic induction methods,which can carry out detection without an external excitation source.Using this technology,the proposed scheme successfully detects defects at high tempe-ratures(up to 670℃)without a cooling device.The key findings include the ability to detect both surface and near-surface defects,such as cracks and oscillation marks,with an enhanced signal-to-noise ratio(SNR)of 7.2 dB after signal processing.The method’s practicality was validated in a steel mill environment,where testing on casting slabs effectively detected defects,providing a foundation for improving industrial quality control.The proposed detection scheme offers a significant advancement in nondestructive testing(NDT)for high-temperature applications,contributing to more efficient and accurate monitoring of ferromagnetic material integrity.
文摘Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.
文摘The Ni/SBA-15 catalysts were synthesized using the in situ method and the influence of crystallization temperature on nickel utilization efficiency-a critical factor in mesoporous material design-was systematically investigated.The structural characteristics and nickel anchoring capacity were analyzed using XRD,BET,FT-IR,H2-TPR,and ICP-OES.The results demonstrated that the crystallization temperature significantly affected the framework order of SBA-15 and the surface anchoring efficiency of Ni ions.The nickel utilization efficiency increased from 8.4%at 80℃ to 60.49%at 140℃,but then decreased to 47.25%at 160℃,indicating an optimal crystallization temperature window.This provides crucial guidance for tailoring high-performance metal-doped molecular sieves.The optimal catalyst exhibited excellent performance in the hydrogenation of 1,4-butynediol(BYD):the BYD conversion reached 97.25%with 88.99%selectivity of 1,4-butenediol(BED)within 5 h,and reached 99.73%with 87.34%selectivity of 1,4-butanediol(BDO)after 20 h reaction.These results revealed the critical role of crystallization temperature in metal utilization and provided theoretical support for designing highly active molecular sieve catalysts.
基金supported by the Basic Science Research Program(RS-2024-00455177)through the National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT.
文摘Aqueous zinc ion batteries(AZIBs)are considered promising candidates owing to their inherent safety and low cost.However,the conventional glass fiber(GF)separator used in AZIBs suffers from poor physicochemical properties,leading to uncontrolled zinc(Zn)dendrite formation and undesirable side reactions.To address these limitations and enhance the electrochemical performance of AZIBs,a precisely designed functional separator is developed by incorporating UiO-66-(COOH)_(2)into a poly(vinylidene fluoride)(PVDF)framework(U-PVDF)via a direct in situ growth method.This approach enables uniform distribution of UiO-66-(COOH)_(2)both on the surface and within the PVDF backbone,without increasing separator thickness.Owing to the strong interaction between Zn^(2+)and the abundant carboxyl groups in UiO-66-(COOH)_(2),the U-PVDF separator regulates the Zn^(2+)solvation structure toward a contact ion pair-dominated structure by reducing coordinated water molecules,which effectively mitigates water-induced parasitic reactions and promotes compact Zn deposition.Consequently,a Zn/Zn symmetric cell employing the U-PVDF separator demonstrates superior cycling stability over 1500 cycles without internal short-circuiting at a current density of 6 mA cm^(−2)and an areal capacity of 2 mAh cm^(−2).Moreover,Zn/NaV_(3)O_(8)·xH_(2)O(NVO)cell with the U-PVDF separator exhibits markedly improved cyclability and rate performance compared with those using conventional GF separator.
基金supported by grants from the National Natural Science Foundation of China(G.F.Wang,grant number 82204071)(P.Y.Su,grant numbers 81874268 and 82473655)the Research Funds of the Center for Big Data and Population Health of IHM(P.Y.Su,No.JKS2023016)Anhui Provincial Health Commission Scientific Research Project(Y.Zhou,No.AHWJ2023A30027)。
文摘Vitamin D deficiency(VDD)represents a significant nutritional concern among children and adolescents.The estimated prevalence of VDD in China is 46.8%in this population^([1]).VDD during childhood and adolescence has been associated with the onset of various conditions,including acute respiratory infections,asthma,atopic dermatitis,and food allergies^([2]).Multiple factors,including age,sun exposure,adiposity,and genetics,influence vitamin D levels^([2,3]).Increasing attention has been directed toward understanding the environmental determinants that may influence vitamin D status.Given the potential of metallic pollutants to disrupt endocrine function and their ubiquity in the environment,investigating the effects of metal exposure on human vitamin D status,particularly in vulnerable populations,is imperative.
基金supported by the National Natural Science Foundation of China (Nos.82302355,32371394)Guangdong Basic and Applied Basic Research Foundation (No.2023A1515012628)+1 种基金the Characteristic Innovation Projects of General Colleges and Universities in Guangdong Province (No.2024KTSCX120)the Science and Technology Program of Guangzhou (Nos.2024A04J3324,2024A03J0078)。
文摘Metal ion homeostasis plays a pivotal role in maintaining cellular functions,and its disruption can initiate regulated cell death pathways.Despite its therapeutic potential,metal ion therapy for breast cancer has been hampered by inefficient ion delivery and the intrinsic resistance mechanisms of cancer cells.In this work,a cuproptosis amplifier of copper-telaglenastat coordinate(denoted as Cu-CB) is developed to trigger cell ferroptosis for synergistic breast cancer treatment.Telaglenastat(CB-839),a glutaminase inhibitor,is identified as an effective copper ionophore that facilitates the formation of Cu-CB.Specially,Cu-CB can promote the aggregation of lipoylated proteins to initiate cuproptosis,while also inhibiting glutathione(GSH) synthesis and downregulating glutathione peroxidase 4(GPX4) to trigger ferroptosis.The interplay between these cuproptosis and apoptosis pathways,mediated by Cu-CB,significantly amplifies reactive oxygen species(ROS) production and lipid peroxidation,culminating in the synergistic suppression of breast cancer.Both in vitro and in vivo studies validate the superior antitumor effects of Cu-CB through the induction of cuproptosis and ferroptosis,which may provide a new insight for metal ion delivery systems and metal ion-based tumor therapies.
基金supported by the National Natural Science Foundation of China(No.52304329)the Yunnan Fundamental Research Projects(No.202201BE070001-003),Guo Lin would like to acknowledge Xing Dian talent support program of Yunnan Province.
文摘The recovery of precious metals(PMs)from secondary resources is critical for addressing global supply-chain vulnerabilities and sustainable resource utilization.This review systematically examines the transformative potential of metal-organic frameworks(MOFs)as next-generation adsorbents for PM recovery,focusing on their synthesis,functionalization,and multiscale adsorption mechanisms.We critically analyze conventional pyrometallurgical and hydrometallurgical methods and highlight their limitations in terms of selectivity,energy consumption,and secondary pollution.In contrast,MOFs offer tunable porosity,abundant active sites,and tunable surface chemistry,enabling efficient PM capture via synergistic physical and chemical adsorption.Advanced modification techniques,including direct synthesis and post-synthetic modification,are reviewed to propose strategies for enhancing the adsorption kinetics and selectivity for Au,Ag,Pt,and Pd.Key structure-property relationships are established through multiscale characterization and thermodynamic models,revealing the critical roles of hierarchical porosity,soft donor atoms,and framework stability.Industrial challenges,such as aqueous stability and scalability,are addressed via Zr-O bond strengthening,hydrophobic functionalization,and support immobilization.This study consolidates the experimental and theoretical advances in MOF-based PM recovery and provides a roadmap for translating laboratory innovations into practical applications within the circular-economy framework.
文摘Heavy metal(HM)contamination severely impacts global agricultural production.HMs toxicity effectively damaged the physiological functions such as imbalanced redox homeostasis,altered antioxidant enzyme activity,damage root system architecture,hindered photosynthetic apparatus,cellular toxicity,restricted mineral accumulation,and changed the metabolite production.Using phytohormones may be a successful strategy for enhancing and stimulating plant tolerance to HMs toxicity without affecting the environment.Melatonin(MT),a novel plant growth regulator,and powerful antioxidant molecule,enhances plant resilience to HMs stress by enhancing seedling growth,protecting the photosynthetic system,increasing nutritional status,balanced redox homeostasis,and restricting HMs accumulation from root to shoot.In addition,MT enhances the activity of antioxidant enzymes and triggers the ascorbate-glutathione(AsA-GSH)cycle,which helps remove excessive ROS.MT improves RuBisCO activity to improve photosynthesis and reduce the breakdown of chlorophyll.To identify future research needs,it is crucial to understand the comprehensive and intricate regulatory mechanisms of exogenous and endogenous MT-mediated reduction of heavy metal toxicity in plants.Melatonin has several functions,and this review sheds light on those functions and the molecular processes by which it alleviates HMs toxicity.More research is needed to fully understand how melatonin affects plant tolerance to heavy metals stress.
基金Science and Technology Planning Project of Guangdong Province,2023B1212060048,Xiande Xie。
文摘Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results were obtained.Firstly,at pressures lower than 53GPa,the opaque minerals still keep the unmelted state,while at 78 GPa and higher,FeNi metal and troilite form eutectic intergrowths occurring as disorderly fine veinlets filling the shock-induced fractures in silicate minerals.Secondly,single kamacite grains still maintain their contour at 12 GPa,but a part of brittle troilite grains was fragmented and squeezed into the shock-induced fractures within kamacite grains.At53 and 133 GPa,many more troilite fragments are poured in the kamacite interior to form disordered hybrid aggregates or to form squiggly strips,respectively.Similar phenomena are observed within single troilite grains,but the mineral squeezed into troilite grains is kamacite.Thirdly,chromite is a hard and refractory oxide mineral.When the shock pressure rises step by step from 12 to 133 GPa,the shock effect of chromite is only fragmentation.Its grain size decreases from tens of um at 53 GPa to a few um at 133 GPa.And,fourthly,native copper exhibits distinct redistribution behavior at high temperature.In Jilin samples shock-loaded to 12 GPa,copper initially located at troilite-kamacite interfaces partially transferred into small troilite grains containing fine FeNi particles.At 53 and 133 GPa,native copper preferentially transferred into larger troilite grains containing more particles of eutectic FeNi metal.
文摘The surge in environmental pollution in recent years driven by numerous pollutants has necessitated the search for efficient removal methods.Phytoremediation is an eco-friendly technique that provides multiple benefits over conventional methods of removing contaminants.Despite the numerous benefits of this technique,it has certain limitations that can be addressed by incorporating nanoparticles to improve its effectiveness.This review paper aims to explore the impact of heavy metal pollution on plants and human health.It highlights the role and mechanism of nanoparticles in enhancing phytoremediation,their application in the detection of heavy metals,and the strategies for the safe disposal of phytoremediation biomass.Biosynthesized nanoparticles are eco-friendly and non-toxic,with applications in biomedical and environmental fields.Nanoparticles can be used in the form of nano biosensors like smartphone-operated wireless sensors made from Cinnamomum camphora,enabling efficient detection of heavy metal ions.According to the studies,nanoparticles remove 80%–97%of heavy metals by various methods like reduction,precipitation,adsorption,etc.The phytoremediation biomass disposal can be done by heat treatment,phytomining,and microbial treatment with some modifications to further enhance their results.Phytoremediation is an environmentally friendly technique but requires further research and integration with biomass energy production to overcome scalability challenges and ensure safe biomass disposal.
基金supported by the National Key Research and Development Program of China(Grant Nos.2024YFA1611102,2022YFA1403903,2023YFA1406101,and 2022YFA1204100)the National Natural Science Foundation of China(Grant Nos.12304075 and 62488201)+1 种基金CAS Project for Young Scientists in Basic Research(Grant Nos.2022YSBR-048 and YSBR-003)the Innovation Program of Quantum Science and Technology(Grant No.2021ZD0302700)。
文摘We present a systematic investigation of the superconductivity in high-quality CsTi_(3)Bi_(5) single crystals by combining bulk property characterization and local-probe spectroscopy.Two successive superconducting transitions are observed in this newly discovered kagome material.In the first stage,the diamagnetic response strengthens significantly from T_(c)~4.9 K to 4.6 K,followed by a broad transition below 4.6 K in the second stage.Moreover,different magnetic field dependences are observed for the two stages,where the first stage is field-insensitive while the second stage exhibits strong field dependence.The ultra-low magnetic field measurements indicate that the lower critical field H_(c1)(T)exhibits small anisotropy.Based on a comparative study of the superconducting state in CsBi2 and microscopic verification via scanning tunneling microscopy(STM),our results suggest the emergence of exotic and intrinsic superconductivity in this new titanium-based kagome superconductor,establishing it as a promising platform for further exploring the complexity of electronic states in the kagome lattice.
基金supported by the National Natural Science Foundation of China (No.21801111)the Training Plan for Young Core Teachers in Higher Education of Henan Province (No.2021GGJS131)+1 种基金Natural Science Foundation of Henan Province (No.232300421232)the Heluo Young Talent Lifting Project (No.2023HLTJ02)。
文摘Ln@MOFs by anchoring rare metal ions(Ln) into metal-organic frameworks(MOFs) are proved to have great potential in the field of luminescent molecular thermometer.Nevertheless,the current research indicated that the poor structural stability and low sensitivity hindered their application scope.In this work,a new MOF Zn-450 luminescent thermometer with multiple emission fluorescence characteristics was synthesized by the combination of 3,3,5,5-biphenyl tetracarboxylic acid(H_(4)L) and Zn^(2+) ion under solvothermal conditions.Interestingly,a high relative sensitivity of 1.43 % K^(-1) was found within 80-300 K based on Zn-450.Subsequently,two high-sensitivity luminescent Ln@MOFs(Ln = Eu and Tb) were further fabricated by doping rare earth ions into Zn-450 based on the post-synthesis strategy.Among them,the Eu@Zn-450 demonstrates various luminous behaviors while achieving an increased relative sensitivity of 1.63 % K^(-1).In addition,the continuously visible red,pink,and purple luminescent emissions at the same temperature range were observed,suggesting that the Eu@Zn-450 could be utilized as a luminescent colorimetric molecular thermometer.Importantly,this work can present new possibilities for the development of rare earth-doped luminescence and its temperature sensing properties.
基金Funded by the National Natural Science Foundation of China(No.21805217)the Fundamental Research Funds for the Central Universities(WUT:2019IVB014 and 2021IVA014)。
文摘We synthesized Ru_(1)Cu_(25)P_(7.5)/TiO_(2)catalyst using sodium borohydride(NaBH_(4))as reductant in a facile strategy.The highly dispersed RuCuP nanoclusters are anchored on the TiO_(2)surface with an average particle size of 2.62 nm.The catalyst shows excellent catalytic activity when applied to the hydrolysis of AB,which owns a high turnover frequency value of 531.56 mol_(H2)mol_(Ru)^(-1)min^(-1)and a low activation energy of 46.38 kJ·mol^(-1),it also exhibits good durability which maintains 61.13%initial activity after five cycles.The high catalytic performance of Ru_(1)Cu_(25)P_(7.5)/TiO_(2)may be attributed to the synergistic effects between Ru,Cu,and P elements,fine particle size,good dispersion,and the tight adhesion between nanoclusters and carrier.
基金supported by the Korea Institute for Advancement of Technology (KIAT)the Ministry of Trade,Industry&Energy (MOTIE) of the Republic of Korea (No. P0022130)by the Institute of Information&Communications Technology Planning&Evaluation(IITP)-Innovative Human Resource Development for Local Intellectualization program grant funded by the Korea government (MSIT)(IITP-2025-RS-2023-00259678)
文摘To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,we report a hollow-structured Ni_(x)Co_(1−x)O/Ni_(3)S_(2)/Co_(9)S_(8)heterostructure synthesized via sequential template-assisted growth,thermal oxidation,and controlled sulfidation process.The abundant bimetallic heterointerfaces not only provide additional active sites but also promote electronic modulation via charge redistribution.Additionally,the porous and hollow architecture enhances active surface area and mass transfer ability,thereby increasing the number of accessible active sites for alkaline OER.As a result,the prepared electrocatalyst achieves low overpotential of 310 mV at 10 mA cm^(−2)and small Tafel slope of 55.94 mV dec^(−1),demonstrating the exceptional electrocatalytic performance for alkaline OER.When integrated as the anode in an AEMWE cell,it delivers outstanding performance with only 1.657 V at 1.0 A cm^(−2)and reaches high current density of 5.0 A cm^(−2)at 1.989 V,surpassing those of commercial RuO_(2).The cell also shows excellent long-term durability over 100 h with minimal degradation.This study highlights the strong potential of rationally engineered oxide/sulfide heterostructures for next-generation alkaline water electrolysis.
