The paper starts with a brief overview to the necessity of sheet metal forming simulation and the complexity of automobile panel forming, then leads to finite element analysis (FEA) which is a powerful simulation too...The paper starts with a brief overview to the necessity of sheet metal forming simulation and the complexity of automobile panel forming, then leads to finite element analysis (FEA) which is a powerful simulation tool for analyzing complex three-dimensional sheet metal forming problems. The theory and features of the dynamic explicit finite element methods are introduced and the available various commercial finite element method codes used for sheet metal forming simulation in the world are discussed,and the civil and international status quo of automobile panel simulation as well. The front door outer panel of one certain new automobile is regarded as one example that the dynamic explicit FEM code Dynaform is used for the simulation of the front door outer panel forming process. Process defects such as ruptures are predicted. The improving methods can be given according to the simulation results. Foreground of sheet metal forming simulation is outlined.展开更多
Iterations in optimization and numerical simulation for the sheet metal forming process may lead to extensive computation. In addition, uncertainties in materials or processing parameters may have great influence on t...Iterations in optimization and numerical simulation for the sheet metal forming process may lead to extensive computation. In addition, uncertainties in materials or processing parameters may have great influence on the design quality. A six sigma optimization method is proposed, by combining the dual response surface method （DRSM） and six sigma philosophy, to save computation cost and improve reliability and robustness of parts. Using this method, statistical technology, including the design of experiment and analysis of variance, approximate model and six sigma philosophy are integrated together to achieve improved quality. Two sheet metal forming processes are provided as examples to illustrate the proposed method.展开更多
By using the Finite Element Inverse Approach based on the Hill quadratic anisotrop-ically yield criterion and the quadrilateral element, a fast analyzing software-FASTAMP for the sheet metal forming is developed. The ...By using the Finite Element Inverse Approach based on the Hill quadratic anisotrop-ically yield criterion and the quadrilateral element, a fast analyzing software-FASTAMP for the sheet metal forming is developed. The blank shapes of three typical stampings are simulated and compared with numerical results given by the AUTOFORM software and experimental results, respectively. The comparison shows that the FASTAMP can predict blank shape and strain distribution of the stamping more precisely and quickly than those given by the traditional methods and the AUTOFORM.展开更多
Surrogate assisted optimization has been widely applied in sheet metal forming design due to its efficiency. Therefore, to improve the efficiency of design and reduce the product development cycle, it is important for...Surrogate assisted optimization has been widely applied in sheet metal forming design due to its efficiency. Therefore, to improve the efficiency of design and reduce the product development cycle, it is important for scholars and engineers to have some insight into the performance of each surrogate assisted optimization method and make them more flexible practically. For this purpose, the state-of-the-art surrogate assisted optimizations are investigated. Furthermore, in view of the bottleneck and development of the surrogate assisted optimization and sheet metal forming design, some important issues on the surrogate assisted optimization in support of the sheet metal forming design are analyzed and discussed, involving the description of the sheet metal forming design, off-line and online sampling strategies, space mapping algorithm, high dimensional problems, robust design, some challenges and potential feasible methods. Generally, this paper provides insightful observations into the performance and potential development of these methods in sheet metal forming design.展开更多
An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted F...An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted FE elements to EFG domain in analysis. A new scheme to implement adaptive conversion and coupling is presented. The coupling method takes both advantages of finite element method (FEM) and meshless methods. It is capable of handling large deformations with no need of remeshing procedures, while it is computationally more efficient than those full meshless methods. The effectiveness of the proposed method is demonstrated with the numerical simulations of the bulk metal forming processes including forging and extrusion.展开更多
The formability of the material determines the amount of available deformation before failure and thus is important for the production of various structural components in industries. The workability of materiMs is com...The formability of the material determines the amount of available deformation before failure and thus is important for the production of various structural components in industries. The workability of materiMs is commonly evaluated by different forms of failure mod- els during sheet metal forming （SMF） processes. In order to provide a whole picture about the prediction models for SMF failure, necking-related formability and ductile fracture-related forma- bility studies in SMF processes are systematically summarized, the applicability and limitation of each model are highlighted, and the link between forming limit diagram and ductile fracture criterion is pointed out, Conclusions about some critical issues on failure in SMF are made.展开更多
Prediction of forming limit in sheet metal forming is among the most important challenges confronting researchers. In this paper, a fully coupled elastic-plastic-damage model has been developed and implemented into an...Prediction of forming limit in sheet metal forming is among the most important challenges confronting researchers. In this paper, a fully coupled elastic-plastic-damage model has been developed and implemented into an explicit code. Due to the adoption of the plane stress and finite strain theories, model can predict deformation and damage of parts quickly and accurately. Also, damage initiation, propagation, and fracture in some operations are predicted and validated with experiments. It is concluded that finite strain combined with continuum damage mechanics can be used as a quick tool to predict ductile damage, fracture, and forming limits in sheet metal forming processes.展开更多
The forming principle and deformation analysis of NC incremental sheet metalforming process as well as the process planning, experiment and key process parameters of verticalwall square box forming are presented. Beca...The forming principle and deformation analysis of NC incremental sheet metalforming process as well as the process planning, experiment and key process parameters of verticalwall square box forming are presented. Because the deformation of sheet metal only occurs around thetool head and the deformed region is subjected to stretch deformation, the deformed region of sheetmetal thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheetmetal deformation. The forming half-apex angle 9 and corner radius R are the main processparameters in NC incremental forming of vertical wall square box. According to sine law, a verticalwall square box can't be formed by NC incremental sheet metal forming process in a single process,rather, it must be formed in multi processes. Thus, the parallel line type tool path process methodis presented to form the vertical wall square box, and the experiment and analysis are made toverify it.展开更多
Based on the Finite Element Theory of Rigid Plastic,relevant problems during plas-tic simulation on sheet metal forming were technologically studied and simplified;a simplified model of the blank holder during the dra...Based on the Finite Element Theory of Rigid Plastic,relevant problems during plas-tic simulation on sheet metal forming were technologically studied and simplified;a simplified model of the blank holder during the drawing process was established and the effects of related parameters on the forming processes were also studied.At the same time,a finite--element numerical simulation program SPID was developed.The distribution of strain and relationship of stress--stroke simulated were compared with experimented,the results are well coincided with each other.It is verified that the analytical program is reliable.展开更多
Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force...Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process. The experimental results were compared with numerical results and proved agreement. It shows the method is effective.展开更多
Sheet metal forming,as a typical energy-intensive process,consumes massive energy.Due to the significant difference between sheet metal forming and machining,manufacturers still lack an effective method to monitor and...Sheet metal forming,as a typical energy-intensive process,consumes massive energy.Due to the significant difference between sheet metal forming and machining,manufacturers still lack an effective method to monitor and analyze the energy efficiency in the sheet metal forming workshop.To this end,an energy efficiency monitoring and analysis(EEMA)method,which is supported by Internet of Things(IoT),is proposed.The characteristics in a forming workshop are first analyzed,and then the architecture of the method is expatiated-detailedly.Energy efficiency indicators at machine level,process level,and workshop level are defined,respectively.Finally,a sheet metal forming workshop for the deformation of panels of forklift was investigated to validate the effectiveness and benefits of the proposed method.With the application of the IoT-enabled method,various energy-saving decisions can be made by the management of the enterprises for energy efficiency improvement and energy consumption reduction(EEIECR)in the sheet metal forming workshop.展开更多
The use of ultra-high strength steels through sheet metal forming process offers a practical solution to the lightweight design of vehicles.However,sheet metal forming process not only produces desirable changes in ma...The use of ultra-high strength steels through sheet metal forming process offers a practical solution to the lightweight design of vehicles.However,sheet metal forming process not only produces desirable changes in material properties but also causes material damage that may adversely influence the service performance of the material formed.Thus,an investigation is conducted to experimentally quantify such influence for a commonly used steel（the 22MnB5 steel） based on the hot and cold forming processes.For each process,a number of samples are used to conduct a uniaxial tensile test to simulate the forming process.After that,some of the samples are trimmed into a standard shape and then uniaxially extended until fracture to simulate the service stage.Finally,a microstructure test is conducted to analyze the microdefects of the remaining samples.Based on the results of the first two tests,the effect of material damage on the service performance of 22MnB5 steel is analyzed.It is found that the material damages of both the hot and cold forming processes cause reductions in the service performance,such as the failure strain,the ultimate stress,the capacity of energy absorption and the ratio of residual strain.The reductions are generally lower and non-linear in the former process but higher and linear in the latter process.Additionally,it is found from the microstructure analysis that the difference in the reductions of the service performance of 22MnB5 by the two forming processes is driven by the difference in the micro damage mechanisms of the two processes.The findings of this research provide a useful reference in terms of the selection of sheet metal forming processes and the determination of forming parameters for 22MnB5.展开更多
Straight plates, hollow columns, ear-like blade tips, twist plates withdirectional solidification microstructure made of Rene 95 superalloys were successfully fabricatedon Nickel-base superalloy and DD3 substrates, re...Straight plates, hollow columns, ear-like blade tips, twist plates withdirectional solidification microstructure made of Rene 95 superalloys were successfully fabricatedon Nickel-base superalloy and DD3 substrates, respectively. The processing conditions for productionof the parts with corresponding shapes were obtained. The fabrication precision was high and thecomponents were compact. The solidification microstructure of the parts was analyzed by opticalmicroscopy. The results show that the solidification microstructure is composed of columnardendrites, by epitaxial growth onto the directional solidification substrates. The crystallographyorientation of the parts was parallel to that of the substrates. The primary arm spacing was about10 mum, which is in the range of superfine dendrites, and the secondary arm was small or evendegenerated. It is concluded that the laser metal forming technique provides a method to manufacturedirectional solidification components.展开更多
The adaptive remeshing technique for quadrilateral elements consists of modules thetrigger of remeshing, the new mesh generation, adaptive refinement and interpolationof field variables. The new adaptive mesh genemtio...The adaptive remeshing technique for quadrilateral elements consists of modules thetrigger of remeshing, the new mesh generation, adaptive refinement and interpolationof field variables. The new adaptive mesh genemtion is the key problem. First, acoarse mesh is created by using 'loop algorithm'. Subsequent local mesh adaptiverefinement is performed based on effective strain. Finally, a typical example of upset-ting is given to test efficient of techniques, from which it is verified that the remeshingalgorithm developed here exhibits good performance and has high accuracy.展开更多
This paper presents the derivation of a first order friction model for lubricated sheet metal forming.Assuming purely plastic real contacts, Newton's law of viscosity, and a square root behavior of the hydrodynami...This paper presents the derivation of a first order friction model for lubricated sheet metal forming.Assuming purely plastic real contacts, Newton's law of viscosity, and a square root behavior of the hydrodynamic coefficient of friction with respect to the hydrodynamic Hersey parameter an analytic model is found. The model predicts the coefficient of friction as a function of the relative pressure, the relative Hersey parameter and the real contact coefficient of friction. Questions about local and global friction are raised in the validation of the model against flat tool sheet experiments. For some flat tool sheet experiments reasonable agreements are obtained assuming a rigid punch pressure distribution. The restricted number of user inputs makes the model useful in early tool design simulations.展开更多
The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/stra...The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/strain distributions.This approach was implemented to minimize the approximated plastic potential energy derived from the total plastic work and the equivalent external work in static equilibrium,for incompressibly rigid-plastic materials,by FE calculation based on the extremum work principle.The one-step forward simulations of compression and rolling processes were presented as examples,and the results were compared with those obtained by classical incremental FE simulation to verify the feasibility and validity of the proposed method.展开更多
Ductile damage often occurs during metal forming processes due to the large thermo-elasto （visco） plastic flow Iocalisation. This paper presents a numerical methodology, which aims to virtually improve any metal for...Ductile damage often occurs during metal forming processes due to the large thermo-elasto （visco） plastic flow Iocalisation. This paper presents a numerical methodology, which aims to virtually improve any metal forming processes. The methodology is based on elastoplastic constitutive equations accounting for nonlinear mixed isotropic and kinematic hardening strongly coupled with isotropic ductile damage. An adaptive remeshing scheme based on geometrical and physical error estimates including a kill element procedure is used. Some numerical results are presented to show the capability of the model to predict the damage initiation and growth during the metal forming processes.展开更多
A meshfree method based on reproducing kernel approximation and point collocation is presented for analysis of metal ring compression. The point collocation method is a true meshfree method without the employment of a...A meshfree method based on reproducing kernel approximation and point collocation is presented for analysis of metal ring compression. The point collocation method is a true meshfree method without the employment of a background mesh. It is shown that, in a point collocation approach, the remesh problem because of the mesh distortion in FEM （finite element method） and the low efficiency in Galerkin-based meshfree method are avoided. The corrected kernel functions are introduced to the stabilization of free-surface boundary conditions. The solution of symmetric ring compression problem is compared with a conventional finite element solution, and reasonable results have been obtained.展开更多
1.IntroductionThe research of metal forming theoryand technology always takes an importantplace in materials science and engineering.However,in a long period,the developmentof technology goes ahead of the theoreticals...1.IntroductionThe research of metal forming theoryand technology always takes an importantplace in materials science and engineering.However,in a long period,the developmentof technology goes ahead of the theoreticalstudy.Most design principles used in prac-展开更多
文摘The paper starts with a brief overview to the necessity of sheet metal forming simulation and the complexity of automobile panel forming, then leads to finite element analysis (FEA) which is a powerful simulation tool for analyzing complex three-dimensional sheet metal forming problems. The theory and features of the dynamic explicit finite element methods are introduced and the available various commercial finite element method codes used for sheet metal forming simulation in the world are discussed,and the civil and international status quo of automobile panel simulation as well. The front door outer panel of one certain new automobile is regarded as one example that the dynamic explicit FEM code Dynaform is used for the simulation of the front door outer panel forming process. Process defects such as ruptures are predicted. The improving methods can be given according to the simulation results. Foreground of sheet metal forming simulation is outlined.
基金This project is supported by National Natural Science Foundation of China (No.50475020).
文摘Iterations in optimization and numerical simulation for the sheet metal forming process may lead to extensive computation. In addition, uncertainties in materials or processing parameters may have great influence on the design quality. A six sigma optimization method is proposed, by combining the dual response surface method （DRSM） and six sigma philosophy, to save computation cost and improve reliability and robustness of parts. Using this method, statistical technology, including the design of experiment and analysis of variance, approximate model and six sigma philosophy are integrated together to achieve improved quality. Two sheet metal forming processes are provided as examples to illustrate the proposed method.
基金Project supported by the National Natural Sciences Foundation of China(No. 50335060).
文摘By using the Finite Element Inverse Approach based on the Hill quadratic anisotrop-ically yield criterion and the quadrilateral element, a fast analyzing software-FASTAMP for the sheet metal forming is developed. The blank shapes of three typical stampings are simulated and compared with numerical results given by the AUTOFORM software and experimental results, respectively. The comparison shows that the FASTAMP can predict blank shape and strain distribution of the stamping more precisely and quickly than those given by the traditional methods and the AUTOFORM.
基金Supported by National Natural Science Foundation of China(Grant Nos.11572120,11172097,11302266)
文摘Surrogate assisted optimization has been widely applied in sheet metal forming design due to its efficiency. Therefore, to improve the efficiency of design and reduce the product development cycle, it is important for scholars and engineers to have some insight into the performance of each surrogate assisted optimization method and make them more flexible practically. For this purpose, the state-of-the-art surrogate assisted optimizations are investigated. Furthermore, in view of the bottleneck and development of the surrogate assisted optimization and sheet metal forming design, some important issues on the surrogate assisted optimization in support of the sheet metal forming design are analyzed and discussed, involving the description of the sheet metal forming design, off-line and online sampling strategies, space mapping algorithm, high dimensional problems, robust design, some challenges and potential feasible methods. Generally, this paper provides insightful observations into the performance and potential development of these methods in sheet metal forming design.
基金Project (No. 50575143) supported by the National Natural Science Foundation of China
文摘An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted FE elements to EFG domain in analysis. A new scheme to implement adaptive conversion and coupling is presented. The coupling method takes both advantages of finite element method (FEM) and meshless methods. It is capable of handling large deformations with no need of remeshing procedures, while it is computationally more efficient than those full meshless methods. The effectiveness of the proposed method is demonstrated with the numerical simulations of the bulk metal forming processes including forging and extrusion.
基金financial support from National Natural Science Foundation of China through Grant U1737210
文摘The formability of the material determines the amount of available deformation before failure and thus is important for the production of various structural components in industries. The workability of materiMs is commonly evaluated by different forms of failure mod- els during sheet metal forming （SMF） processes. In order to provide a whole picture about the prediction models for SMF failure, necking-related formability and ductile fracture-related forma- bility studies in SMF processes are systematically summarized, the applicability and limitation of each model are highlighted, and the link between forming limit diagram and ductile fracture criterion is pointed out, Conclusions about some critical issues on failure in SMF are made.
文摘Prediction of forming limit in sheet metal forming is among the most important challenges confronting researchers. In this paper, a fully coupled elastic-plastic-damage model has been developed and implemented into an explicit code. Due to the adoption of the plane stress and finite strain theories, model can predict deformation and damage of parts quickly and accurately. Also, damage initiation, propagation, and fracture in some operations are predicted and validated with experiments. It is concluded that finite strain combined with continuum damage mechanics can be used as a quick tool to predict ductile damage, fracture, and forming limits in sheet metal forming processes.
基金This project is supported by National Natural Science Foundation of China (No.50175034).
文摘The forming principle and deformation analysis of NC incremental sheet metalforming process as well as the process planning, experiment and key process parameters of verticalwall square box forming are presented. Because the deformation of sheet metal only occurs around thetool head and the deformed region is subjected to stretch deformation, the deformed region of sheetmetal thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheetmetal deformation. The forming half-apex angle 9 and corner radius R are the main processparameters in NC incremental forming of vertical wall square box. According to sine law, a verticalwall square box can't be formed by NC incremental sheet metal forming process in a single process,rather, it must be formed in multi processes. Thus, the parallel line type tool path process methodis presented to form the vertical wall square box, and the experiment and analysis are made toverify it.
文摘Based on the Finite Element Theory of Rigid Plastic,relevant problems during plas-tic simulation on sheet metal forming were technologically studied and simplified;a simplified model of the blank holder during the drawing process was established and the effects of related parameters on the forming processes were also studied.At the same time,a finite--element numerical simulation program SPID was developed.The distribution of strain and relationship of stress--stroke simulated were compared with experimented,the results are well coincided with each other.It is verified that the analytical program is reliable.
基金Supported by Science and Technology Development Foundation of Shanghai (015211009).
文摘Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process. The experimental results were compared with numerical results and proved agreement. It shows the method is effective.
基金Projects(U20A20295,52005146)supported by the National Natural Science Foundation of ChinaProject(PA2019GDQT 0024)supported by Fundamental Research Funds for the Central Universities,China。
文摘Sheet metal forming,as a typical energy-intensive process,consumes massive energy.Due to the significant difference between sheet metal forming and machining,manufacturers still lack an effective method to monitor and analyze the energy efficiency in the sheet metal forming workshop.To this end,an energy efficiency monitoring and analysis(EEMA)method,which is supported by Internet of Things(IoT),is proposed.The characteristics in a forming workshop are first analyzed,and then the architecture of the method is expatiated-detailedly.Energy efficiency indicators at machine level,process level,and workshop level are defined,respectively.Finally,a sheet metal forming workshop for the deformation of panels of forklift was investigated to validate the effectiveness and benefits of the proposed method.With the application of the IoT-enabled method,various energy-saving decisions can be made by the management of the enterprises for energy efficiency improvement and energy consumption reduction(EEIECR)in the sheet metal forming workshop.
基金Supported by National Natural Science Foundation of China(Grant No.51375201)CSAE(Beijing)Automotive Lightweight Technology Research Institute Development Fund Project of China
文摘The use of ultra-high strength steels through sheet metal forming process offers a practical solution to the lightweight design of vehicles.However,sheet metal forming process not only produces desirable changes in material properties but also causes material damage that may adversely influence the service performance of the material formed.Thus,an investigation is conducted to experimentally quantify such influence for a commonly used steel（the 22MnB5 steel） based on the hot and cold forming processes.For each process,a number of samples are used to conduct a uniaxial tensile test to simulate the forming process.After that,some of the samples are trimmed into a standard shape and then uniaxially extended until fracture to simulate the service stage.Finally,a microstructure test is conducted to analyze the microdefects of the remaining samples.Based on the results of the first two tests,the effect of material damage on the service performance of 22MnB5 steel is analyzed.It is found that the material damages of both the hot and cold forming processes cause reductions in the service performance,such as the failure strain,the ultimate stress,the capacity of energy absorption and the ratio of residual strain.The reductions are generally lower and non-linear in the former process but higher and linear in the latter process.Additionally,it is found from the microstructure analysis that the difference in the reductions of the service performance of 22MnB5 by the two forming processes is driven by the difference in the micro damage mechanisms of the two processes.The findings of this research provide a useful reference in terms of the selection of sheet metal forming processes and the determination of forming parameters for 22MnB5.
基金This research was financially supported by the National High Technology Research and Development Program of China (No.2001AA337020)the Development Plan of State Key Fundamental Research of China (No. G2000067205-3)
文摘Straight plates, hollow columns, ear-like blade tips, twist plates withdirectional solidification microstructure made of Rene 95 superalloys were successfully fabricatedon Nickel-base superalloy and DD3 substrates, respectively. The processing conditions for productionof the parts with corresponding shapes were obtained. The fabrication precision was high and thecomponents were compact. The solidification microstructure of the parts was analyzed by opticalmicroscopy. The results show that the solidification microstructure is composed of columnardendrites, by epitaxial growth onto the directional solidification substrates. The crystallographyorientation of the parts was parallel to that of the substrates. The primary arm spacing was about10 mum, which is in the range of superfine dendrites, and the secondary arm was small or evendegenerated. It is concluded that the laser metal forming technique provides a method to manufacturedirectional solidification components.
文摘The adaptive remeshing technique for quadrilateral elements consists of modules thetrigger of remeshing, the new mesh generation, adaptive refinement and interpolationof field variables. The new adaptive mesh genemtion is the key problem. First, acoarse mesh is created by using 'loop algorithm'. Subsequent local mesh adaptiverefinement is performed based on effective strain. Finally, a typical example of upset-ting is given to test efficient of techniques, from which it is verified that the remeshingalgorithm developed here exhibits good performance and has high accuracy.
基金supported by the Swedish Foundation for Strategic Research(PV08-0041)
文摘This paper presents the derivation of a first order friction model for lubricated sheet metal forming.Assuming purely plastic real contacts, Newton's law of viscosity, and a square root behavior of the hydrodynamic coefficient of friction with respect to the hydrodynamic Hersey parameter an analytic model is found. The model predicts the coefficient of friction as a function of the relative pressure, the relative Hersey parameter and the real contact coefficient of friction. Questions about local and global friction are raised in the validation of the model against flat tool sheet experiments. For some flat tool sheet experiments reasonable agreements are obtained assuming a rigid punch pressure distribution. The restricted number of user inputs makes the model useful in early tool design simulations.
基金Project(50575143)supported by the National Natural Science Foundation of ChinaProject(20040248005)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/strain distributions.This approach was implemented to minimize the approximated plastic potential energy derived from the total plastic work and the equivalent external work in static equilibrium,for incompressibly rigid-plastic materials,by FE calculation based on the extremum work principle.The one-step forward simulations of compression and rolling processes were presented as examples,and the results were compared with those obtained by classical incremental FE simulation to verify the feasibility and validity of the proposed method.
文摘Ductile damage often occurs during metal forming processes due to the large thermo-elasto （visco） plastic flow Iocalisation. This paper presents a numerical methodology, which aims to virtually improve any metal forming processes. The methodology is based on elastoplastic constitutive equations accounting for nonlinear mixed isotropic and kinematic hardening strongly coupled with isotropic ductile damage. An adaptive remeshing scheme based on geometrical and physical error estimates including a kill element procedure is used. Some numerical results are presented to show the capability of the model to predict the damage initiation and growth during the metal forming processes.
基金the National Natural Science Foundation of China （No. 50275059）.
文摘A meshfree method based on reproducing kernel approximation and point collocation is presented for analysis of metal ring compression. The point collocation method is a true meshfree method without the employment of a background mesh. It is shown that, in a point collocation approach, the remesh problem because of the mesh distortion in FEM （finite element method） and the low efficiency in Galerkin-based meshfree method are avoided. The corrected kernel functions are introduced to the stabilization of free-surface boundary conditions. The solution of symmetric ring compression problem is compared with a conventional finite element solution, and reasonable results have been obtained.
文摘1.IntroductionThe research of metal forming theoryand technology always takes an importantplace in materials science and engineering.However,in a long period,the developmentof technology goes ahead of the theoreticalstudy.Most design principles used in prac-
