Clarify the mechanical properties of different laminations and the fracture mechanism of continental shale under in-situ stress can provide theoretical basis for more comprehensive evaluation of the fracability of con...Clarify the mechanical properties of different laminations and the fracture mechanism of continental shale under in-situ stress can provide theoretical basis for more comprehensive evaluation of the fracability of continental shale oil reservoir.The Chang 72continental shale was used to investigate the mechanical properties of laminations and the effect of natural structure on the crack propagation of the shale.The XRD and thin section tests show that the laminations contain two types:bright sandy lamination with void structure and dark muddy lamination with layer structure.The real-time CT uniaxial compression tests were conducted to investigate the differences of mechanical properties between the muddy lamination and sandy lamination.It found that the uniaxial compression strength and elastic modulus of the sandy lamination are higher,forming a simple crack with large opening,and the Poisson's ratio of the muddy lamination is large,forming obvious lateral deformation and more secondary cracks.On this basis,the cuboid-shaped continental shale specimens were tested under true triaxial compression conditions to study the effect of laminations and interface cracks on crack propagation combining AE and CT techniques.It found that nascent cracks connected laminations and interface cracks to form fracture network under appropriate loading condition,tensile cracks developed in sandy lamination and shear cracks occurred in muddy lamination because of deformation dissonance and brittleness index differences,and more secondary cracks formed in muddy lamination with smaller fracture toughness.Moreover,the combination relationships between nascent and natural cracks mainly conclude direct penetration and deflection,which is affected by the filling degree and morphology of interface cracks and the relationship of lamination types.These conclusions show that laminar continental shale is conducive to forming complex fracture network,which can provide a theoretical basis for the proposal of indicators and methods for fracability evaluation.展开更多
For deep prospects in the foreland thrust belt,southern Junggar Basin,NW China,there are uncertainties in factors controlling the structural deformation,distribution of paleo-structures and detachment layers,and distr...For deep prospects in the foreland thrust belt,southern Junggar Basin,NW China,there are uncertainties in factors controlling the structural deformation,distribution of paleo-structures and detachment layers,and distribution of major hydrocarbon source rocks.Based on the latest 3D seismic,gravity-magnetic,and drilling data,together with the results of previous structural physical simulation and discrete element numerical simulation experiments,the spatial distribution of pre-existing paleo-structures and detachment layers in deep strata of southern Junggar Basin were systematically characterized,the structural deformation characteristics and formation mechanisms were analyzed,the distribution patterns of multiple hydrocarbon source rock suites were clarified,and hydrocarbon accumulation features in key zones were reassessed.The exploration targets in deep lower assemblages with possibility of breakthrough were expected.Key results are obtained in three aspects.First,structural deformation is controlled by two-stage paleo-structures and three detachment layers with distinct lateral variations:the Jurassic layer(moderate thickness,wide distribution),the Cretaceous layer(thickest but weak detachment),and the Paleogene layer(thin but long-distance lateral thrusting).Accordingly,a four-layer composite deformation sequence was identified,and the structural genetic model with paleo-bulge controlling zonation by segments laterally and multiple detachment layers controlling sequence vertically.Second,the Permian source rocks show a distribution pattern with narrow trough(west),multiple sags(central),and broad basin(east),which is depicted by combining high-precision gravity-magnetic data and time-frequency electromagnetic data for the first time,and the Jurassic source rocks feature thicker mudstones in the west and rich coals in the east according to the reassessment.Third,two petroleum systems and a four-layer composite hydrocarbon accumulation model are established depending on the structural deformation strength,trap effectiveness and source-trap configuration.The southern Junggar Basin is divided into three segments with ten zones,and a hierarchical exploration strategy is proposed for deep lower assemblages in this region,that is,focusing on five priority zones,expanding to three potential areas,and challenging two high-risk targets.展开更多
Mechanical elastic wheel(ME-wheel)is a new type of non-inflatable safety tyre,and the structure is significantly different from traditional pneumatic tyre.In order to investigate cornering properties of ME-wheel,exper...Mechanical elastic wheel(ME-wheel)is a new type of non-inflatable safety tyre,and the structure is significantly different from traditional pneumatic tyre.In order to investigate cornering properties of ME-wheel,experimental research on mechanics characteristics of ME-wheel under steady-state cornering conditions are carried out.The test of steady-state cornering properties of ME-wheel at different experimental parameter conditions is conducted by test bench for dynamic mechanical properties of tyre.Cornering property curves are used to analyze the steady-state cornering properties of ME-wheel,namely the variation tendency of lateral force or aligning torque with the increase of side-slip angle.Moreover,evaluation indexes for cornering properties of ME-wheel are extracted and the effect of different experimental parameters(including vertical load,friction coefficient,and speed)on cornering properties of ME-wheel is contrastively analyzed.The proposed research can provide certain reference to facilitate structure parameters and cornering properties optimizing process of ME-wheel.展开更多
The thermal protection materials and structures are widely used in hypersonic vehicles for the purpose of thermal insulation, and their mechanical behavior is one of the key issues in design and manufacture of hyperso...The thermal protection materials and structures are widely used in hypersonic vehicles for the purpose of thermal insulation, and their mechanical behavior is one of the key issues in design and manufacture of hypersonic vehicles. It is our great pleasure to present the seven papers in this special subject of Theoretical ＆ Applied Mechanics Letters （TAML） and introduce the recent progresses on the mechanical behavior of thermal protection materials and structures by the authors.展开更多
A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers...A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.展开更多
Trialuminide alloys of elements such as Ti. Nb or Zr are of particular interest as materials for high temperature usage because their density is very low and specific strength and elastic rnoduli are then very high. T...Trialuminide alloys of elements such as Ti. Nb or Zr are of particular interest as materials for high temperature usage because their density is very low and specific strength and elastic rnoduli are then very high. This report concentrates on recent work on Al3Ti alloys which have been alloyed with ternary elements such that the higher symmetry ordered cubic structure is obtained, leading to somewhat easier operation of deformation mechan isms and hence improved ductility and toughness.Fine details of the crystal structure of cubic trialuminides are considered here and it is shown that the materials generally possess some remnant tetragonal chemical ordering which can affect their me chanical behaviour. In addition the compositional range over which a stable single phase is retained is shown to be extremely small, such that in most cases the materials examined show some form of microstructural instability. These instabilities affect the mechanical behaviour of the materials, for exarnple producing general strengthening. leading to precipitation hardening du ring hig h temperature testing, and causing age hardening instabilities during high temperature static or dynamic testing.Such structural instabifity feads to significant modifications at superdislocations, affecting both the dislocation cores and their associated APB's. Failure for these cubic materials still occurs at very small plastic strains and seems to be determined by difficulties of superdislocation creation near a propagating crack rather than by problems of suitable dislocation configuration and mobility. Possible ways to enhance ductility and toughness by alloying and microstructural modification will be discussed.展开更多
The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallographic, scanning electron microscopes and detection of pro...The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallographic, scanning electron microscopes and detection of properties. The results show that for the cast steel after deformed, the amount of granular carbides of precipitation during the cooling decreased with the increase of the cooling rate, but the hardness was obviously enhanced, as a result, better mechanical properties will be obtained by force air cooling(cooling rate is about 7 ℃·s-1). And the reason of the change for structure and mechanical properties of the cast steel were analyzed.展开更多
This paper deals with the characteristics of silicon modification with lanthanum of Al-Si eutectic alloy in sand mold and metal mold with optical microscopy,scanning electron microscopy,electron microprobe and X-ray d...This paper deals with the characteristics of silicon modification with lanthanum of Al-Si eutectic alloy in sand mold and metal mold with optical microscopy,scanning electron microscopy,electron microprobe and X-ray diffractometer.It is found that the amount of lanthanum,liquid alloy condition,holding time and stir- ring liquid influence the modification of silicon.The modification of silicon with lanthanum is of long effectiveness and has a“incubation time”.The modification can improve the ductility(δ_s)and tensile strength (σ_b)of the alloy,but their maximum values are not corresponding to the same amount of lanthanum.展开更多
The factor of safety of mechanically stabilized earth(MSE) structures can be analyzed either using limit equilibrium method(LEM) or strength reduction method(SRM) in finite element/difference method. In LEM, the stren...The factor of safety of mechanically stabilized earth(MSE) structures can be analyzed either using limit equilibrium method(LEM) or strength reduction method(SRM) in finite element/difference method. In LEM, the strengths of the reinforcement members and soils are reduced with the same factor. While using the SRM, only soil strength is reduced during the calculation of the factor of safety. This causes inconsistence in calculating the factor of safety of the MSE structures. To overcome this, an iteration method is proposed to consider the strength reduction of the reinforcements in SRM. The method is demonstrated by using PLAXIS, a finite element software. The results show that the factor of safety converges after a few iterations. The reduction of strength has different effects on the factor of safety depending on the properties of the reinforcements and the soil, and failure modes.展开更多
A new type of vortex structure-binucleus-type vortex structure-is presented in this paper. It is charac-terized by two nuclear columns which distinguish it from uninuclcus-type vorlex structure. The vortical sur-faces...A new type of vortex structure-binucleus-type vortex structure-is presented in this paper. It is charac-terized by two nuclear columns which distinguish it from uninuclcus-type vorlex structure. The vortical sur-faces of the structure are commonly s-shaped and reversed s-shaped and subordinately of clliptic andhyperbolic shape. and sometimes turbine-like surfaces are observed. On the basis of field structural studies. a mechanical model of rotation around a binuclear column ofcrustal materials is presented in the paper. Burgers viscoelastic solutions of the stress field and deformationfield of this structural type have been obtained using the principle and method of rheology. and simulation ex-periments have been performed. The results of the theoretical calculation and experiments indicate that theproposed mechanical model is applicable.展开更多
With the acceleration of the global aging process and the increase of cardiovascular ancerebrovascular diseases,more and more patients are paralyzed due to accidents,so theexoskeleton robot began to appear in people&#...With the acceleration of the global aging process and the increase of cardiovascular ancerebrovascular diseases,more and more patients are paralyzed due to accidents,so theexoskeleton robot began to appear in people's sight,and the lower limb exoskeleton robot withrehabilitation training is also favored by more and more people.In this paper,the structural designand analysis of the lower limb exoskeleton robot are carried out in view of the patients'expectation ofnormal walking.First,gait analysis and structural design of lower limb exoskeleton robot.Based onthe analysis of the walking gait of normal people,the freedom of the three key joints of the lower limbexoskeleton robot hip joint,knee joint and ankle joint is determined.at the same time,according tothe structuralcharacteristics of each joint,the three key joints are modeled respectively,and theoverall model assembly of the lower limb exoskeleton robot is completed.Secondly,the kinematicsanalysis of the lower limb exoskeleton robot was carried out to obtain the relationship between thelinear displacement,linear speed and acceleration of each joint,so as to ensure the coordination ofthe model with the human lower limb movement.Thirdly,the static analysis of typical gait of hipjoint,knee joint and ankle joint is carried out to verify the safety of the design model under thepremise of ensuring the structural strength requirements.Finally,the parts of the model were 3Dprinted,and the rationality of the design was further verified in the process of assembling the model.展开更多
As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles,the traditional robots cannot accomplish these mentioned complex operational tasks and meet the dexteri...As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles,the traditional robots cannot accomplish these mentioned complex operational tasks and meet the dexterity demands.The hyper-redundant bionic robots can complete complex tasks in the unstructured environments by simulating the motion characteristics of the elephant’s trunk and octopus tentacles.Compared with traditional robots,the hyper-redundant bionic robots can accomplish complex tasks because of their flexible structure.A hyper-redundant elephant’s trunk robot(HRETR)with an open structure is developed in this paper.The content includes mechanical structure design,kinematic analysis,virtual prototype simulation,control system design,and prototype building.This design is inspired by the flexible motion of an elephant’s trunk,which is expansible and is composed of six unit modules,namely,3UPS-PS parallel in series.First,the mechanical design of the HRETR is completed according to the motion characteristics of an elephant’s trunk and based on the principle of mechanical bionic design.After that,the backbone mode method is used to establish the kinematic model of the robot.The simulation software SolidWorks and ADAMS are combined to analyze the kinematic characteristics when the trajectory of the end moving platform of the robot is assigned.With the help of ANSYS,the static stiffness of each component and the whole robot is analyzed.On this basis,the materials of the weak parts of the mechanical structure and the hardware are selected reasonably.Next,the extensible structures of software and hardware control system are constructed according to the modular and hierarchical design criteria.Finally,the prototype is built and its performance is tested.The proposed research provides a method for the design and development for the hyper-redundant bionic robot.展开更多
The Larry Nassar scandal at Michigan State University is the worst and most widespread case of childhood sex abuse in this nation’s history to date,affecting over 150 young girls and women.This article asks:What were...The Larry Nassar scandal at Michigan State University is the worst and most widespread case of childhood sex abuse in this nation’s history to date,affecting over 150 young girls and women.This article asks:What were the structural and ideological mechanisms,policies,and practices that enabled this widespread abuse over a thirty-year period?Louis Althusser’s Marxist theory of Ideological State Apparatuses(and feminist responses to this theory)is useful in explaining how state-making institutions-media outlets,universities,athletic organizations,and family units-are not only produced and reproduced along class lines,but also with respect to gendered power dynamics.By examining the patriarchal nature of ISAs,one can begin to understand how Larry Nassar was for so long shielded from suspicion and criminal prosecution by the institutions that employed him.展开更多
Over the past decade,multistable mechanical metamaterials have been widely investigated because of their novel shape reconfigurability and programmable energy landscape.The ability to reversibly reshape among diverse ...Over the past decade,multistable mechanical metamaterials have been widely investigated because of their novel shape reconfigurability and programmable energy landscape.The ability to reversibly reshape among diverse stable states with different energy levels represents the most important feature of the multistable mechanical metamaterials.We summarize main design strategies of multistable mechanical metamaterials,including those based on self-assembly scheme,snap-through instability,structured mechanism and geometrical frustration,with a focus on the number and controllability of accessible stable states.Then we concentrate on unusual mechanical properties of these multistable mechanical metamaterials,and present their applications in a wide range of areas,including tunable electromagnetic devices,actuators,robotics,and mechanical logic gates.Finally,we discuss remaining challenges and open opportunities of designs and applications of multistable mechanical metamaterials.展开更多
ObjectiveThis study aims to characterize the occurrences and interior structural features of botryoidal structures from the Sinian Dengying Formation in the Sichuan Basin of Southwestern China, and to shed light on th...ObjectiveThis study aims to characterize the occurrences and interior structural features of botryoidal structures from the Sinian Dengying Formation in the Sichuan Basin of Southwestern China, and to shed light on their formation mechanism.展开更多
Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a cent...Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a central role in clean energy conversion,enabling a number of sustainable processes for future air battery technologies.Fluorine,as the most electronegative element(4.0)not only can induce more efficient regulation for the electronic structure,but also can bring more abundant defects and other novel effects in materials selection and preparation for favorable catalysis with respect to the other nonmetal elements.However,an individual and comprehensive overview of fluorine-containing functional materials for oxygen electrocatalysis field is still blank.Therefore,it is very meaningful to review the recent progresses of fluorine-containing oxygen electrocatalysts.In this review,we first systematically summarize the controllable preparation methods and their possible development directions based on fluorine-containing materials from four preparation methods.Due to the strong electron-withdrawing properties of fluorine,its control of the electronic structure can effectively enhance the oxygen electrocatalytic activity of the materials.In addition,the catalytic enhancement effect of fluorine on carbonbased materials also includes the prevent oxidation and the layer peeling,and realizes the precise atomic control.And the catalytic improvement mechanism of fluorine containing metal-based compounds also includes the hydration of metal site,the crystal transformation,and the oxygen vacancy induction.Then,based on their various dimensions(0D–3D),we also have summarized the advantages of different morphologies on oxygen electrocatalytic performances.Finally,the prospects and possible future researching direction of F-containing oxygen electrocatalysts are presented(e.g.,novel pathways,advanced methods for measurement and simulation,field assistance and multi-functions).The review is considered valuable and helpful in exploring the novel designs and mechanism analyses of advanced fluorine-containing electrocatalysts.展开更多
We investigate the structure, energetics, and the ideal tensile strength of tungsten （W） with hydrogen （H） using a first-principles method. Both density of states （DOS） and the electron localization function （...We investigate the structure, energetics, and the ideal tensile strength of tungsten （W） with hydrogen （H） using a first-principles method. Both density of states （DOS） and the electron localization function （ELF） reveal the underlying physical mechanism that the tetrahedral interstitial H is the most energetically favorable. The firstprinciples computational tensile test （FPCTT） shows that the ideal tensile strength is 29.1 GPa at the strain of 14% along the [001] direction for the intrinsic W, while it decreases to 27.1 GPa at the strain of 12% when one impurity H atom is embedded into the bulk W. These results provide a useful reference to understand W as a plasma facing material in the nuclear fusion Tokamak.展开更多
In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. ...In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.展开更多
The curved martensite structures have been observed in CuZnAI-based shape memory alloys by both transmission electron microscope and optical microscope. It was found that the curved martensite structures observed in a...The curved martensite structures have been observed in CuZnAI-based shape memory alloys by both transmission electron microscope and optical microscope. It was found that the curved martensite structures observed in as-solution treated, as-aged and as-trained alloys usually occurred around dislocation tangles or precipitate, at the plate boundary or grain boundary, and when the growing plates collided with each other or alternate mutually.展开更多
Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and exten...Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and extended X-ray absorption fine structure (EXAFS). The powder obtained after milling is of single fcc structure with grain size of nanometer order. The Mossbauer spectra of the milled powder can be fitted by two subspectra whose hyperfine magnetic fields are 16 MA/m and 20 MA/m while that of pure Fe disappeared. EXAFS results show that the radial structure function (RSF) of Fe K-edge changed drastically and finally became similar to that of reference Cu K-edge, while that of Cu K-edge nearly keeps unchanged in the process of milling. These imply that bcc Fe really transforms to fcc structure and alloying between Fe and Cu occurs truly on an atomic scale. EXAFS results indicate that iron atoms tend to segregate at the boundaries and Cu atoms are rich in the fcc lattice. Annealing experiments show that the Fe atoms at the interfaces are easy to cluster to α-Fe at a lower temperature, whereas the iron atoms in the lattice will form γ-Fe first at temperature above 350℃, and then transform to bcc Fe展开更多
基金funded by the National Natural Science Foundation of China(42102309 and 42007243)the Natural Science Foundation of Liaoning Province(2023-MSBA-120)the National Key Research and Development Program(2022YFB3304705)。
文摘Clarify the mechanical properties of different laminations and the fracture mechanism of continental shale under in-situ stress can provide theoretical basis for more comprehensive evaluation of the fracability of continental shale oil reservoir.The Chang 72continental shale was used to investigate the mechanical properties of laminations and the effect of natural structure on the crack propagation of the shale.The XRD and thin section tests show that the laminations contain two types:bright sandy lamination with void structure and dark muddy lamination with layer structure.The real-time CT uniaxial compression tests were conducted to investigate the differences of mechanical properties between the muddy lamination and sandy lamination.It found that the uniaxial compression strength and elastic modulus of the sandy lamination are higher,forming a simple crack with large opening,and the Poisson's ratio of the muddy lamination is large,forming obvious lateral deformation and more secondary cracks.On this basis,the cuboid-shaped continental shale specimens were tested under true triaxial compression conditions to study the effect of laminations and interface cracks on crack propagation combining AE and CT techniques.It found that nascent cracks connected laminations and interface cracks to form fracture network under appropriate loading condition,tensile cracks developed in sandy lamination and shear cracks occurred in muddy lamination because of deformation dissonance and brittleness index differences,and more secondary cracks formed in muddy lamination with smaller fracture toughness.Moreover,the combination relationships between nascent and natural cracks mainly conclude direct penetration and deflection,which is affected by the filling degree and morphology of interface cracks and the relationship of lamination types.These conclusions show that laminar continental shale is conducive to forming complex fracture network,which can provide a theoretical basis for the proposal of indicators and methods for fracability evaluation.
基金Supported by the Science and Technology Special Project of CNPC(2023YQX10111)Key Research and Development Special Project of Xinjiang Uygur Autonomous Region(2024B01015-3)。
文摘For deep prospects in the foreland thrust belt,southern Junggar Basin,NW China,there are uncertainties in factors controlling the structural deformation,distribution of paleo-structures and detachment layers,and distribution of major hydrocarbon source rocks.Based on the latest 3D seismic,gravity-magnetic,and drilling data,together with the results of previous structural physical simulation and discrete element numerical simulation experiments,the spatial distribution of pre-existing paleo-structures and detachment layers in deep strata of southern Junggar Basin were systematically characterized,the structural deformation characteristics and formation mechanisms were analyzed,the distribution patterns of multiple hydrocarbon source rock suites were clarified,and hydrocarbon accumulation features in key zones were reassessed.The exploration targets in deep lower assemblages with possibility of breakthrough were expected.Key results are obtained in three aspects.First,structural deformation is controlled by two-stage paleo-structures and three detachment layers with distinct lateral variations:the Jurassic layer(moderate thickness,wide distribution),the Cretaceous layer(thickest but weak detachment),and the Paleogene layer(thin but long-distance lateral thrusting).Accordingly,a four-layer composite deformation sequence was identified,and the structural genetic model with paleo-bulge controlling zonation by segments laterally and multiple detachment layers controlling sequence vertically.Second,the Permian source rocks show a distribution pattern with narrow trough(west),multiple sags(central),and broad basin(east),which is depicted by combining high-precision gravity-magnetic data and time-frequency electromagnetic data for the first time,and the Jurassic source rocks feature thicker mudstones in the west and rich coals in the east according to the reassessment.Third,two petroleum systems and a four-layer composite hydrocarbon accumulation model are established depending on the structural deformation strength,trap effectiveness and source-trap configuration.The southern Junggar Basin is divided into three segments with ten zones,and a hierarchical exploration strategy is proposed for deep lower assemblages in this region,that is,focusing on five priority zones,expanding to three potential areas,and challenging two high-risk targets.
基金supported by the Explore Research Project of the General Armament Department (No. NHA13002)the Fundamental Research Funds for the Central Universities (No.NP2016412)the National Natural Science Foundation of China(No.51505261)
文摘Mechanical elastic wheel(ME-wheel)is a new type of non-inflatable safety tyre,and the structure is significantly different from traditional pneumatic tyre.In order to investigate cornering properties of ME-wheel,experimental research on mechanics characteristics of ME-wheel under steady-state cornering conditions are carried out.The test of steady-state cornering properties of ME-wheel at different experimental parameter conditions is conducted by test bench for dynamic mechanical properties of tyre.Cornering property curves are used to analyze the steady-state cornering properties of ME-wheel,namely the variation tendency of lateral force or aligning torque with the increase of side-slip angle.Moreover,evaluation indexes for cornering properties of ME-wheel are extracted and the effect of different experimental parameters(including vertical load,friction coefficient,and speed)on cornering properties of ME-wheel is contrastively analyzed.The proposed research can provide certain reference to facilitate structure parameters and cornering properties optimizing process of ME-wheel.
基金support from the Natural Science Foundation of China(91016029,91216302,and 91216301)
文摘The thermal protection materials and structures are widely used in hypersonic vehicles for the purpose of thermal insulation, and their mechanical behavior is one of the key issues in design and manufacture of hypersonic vehicles. It is our great pleasure to present the seven papers in this special subject of Theoretical ＆ Applied Mechanics Letters （TAML） and introduce the recent progresses on the mechanical behavior of thermal protection materials and structures by the authors.
基金Funded by the National Natural Science Foundation of China(51572208)the 111 Project(B13035)+1 种基金the National Natural Science Foundation of Hubei Province(2014CFB257 and 2014CFB258)the Fundamental Research Funds for the Central Universities(WUT:2015-III-059)
文摘A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.
文摘Trialuminide alloys of elements such as Ti. Nb or Zr are of particular interest as materials for high temperature usage because their density is very low and specific strength and elastic rnoduli are then very high. This report concentrates on recent work on Al3Ti alloys which have been alloyed with ternary elements such that the higher symmetry ordered cubic structure is obtained, leading to somewhat easier operation of deformation mechan isms and hence improved ductility and toughness.Fine details of the crystal structure of cubic trialuminides are considered here and it is shown that the materials generally possess some remnant tetragonal chemical ordering which can affect their me chanical behaviour. In addition the compositional range over which a stable single phase is retained is shown to be extremely small, such that in most cases the materials examined show some form of microstructural instability. These instabilities affect the mechanical behaviour of the materials, for exarnple producing general strengthening. leading to precipitation hardening du ring hig h temperature testing, and causing age hardening instabilities during high temperature static or dynamic testing.Such structural instabifity feads to significant modifications at superdislocations, affecting both the dislocation cores and their associated APB's. Failure for these cubic materials still occurs at very small plastic strains and seems to be determined by difficulties of superdislocation creation near a propagating crack rather than by problems of suitable dislocation configuration and mobility. Possible ways to enhance ductility and toughness by alloying and microstructural modification will be discussed.
文摘The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallographic, scanning electron microscopes and detection of properties. The results show that for the cast steel after deformed, the amount of granular carbides of precipitation during the cooling decreased with the increase of the cooling rate, but the hardness was obviously enhanced, as a result, better mechanical properties will be obtained by force air cooling(cooling rate is about 7 ℃·s-1). And the reason of the change for structure and mechanical properties of the cast steel were analyzed.
文摘This paper deals with the characteristics of silicon modification with lanthanum of Al-Si eutectic alloy in sand mold and metal mold with optical microscopy,scanning electron microscopy,electron microprobe and X-ray diffractometer.It is found that the amount of lanthanum,liquid alloy condition,holding time and stir- ring liquid influence the modification of silicon.The modification of silicon with lanthanum is of long effectiveness and has a“incubation time”.The modification can improve the ductility(δ_s)and tensile strength (σ_b)of the alloy,but their maximum values are not corresponding to the same amount of lanthanum.
基金Project(41072200)supported by the National Natural Science Foundation of ChinaProject(14PJD032)supported by the Shanghai Pujiang Program,China
文摘The factor of safety of mechanically stabilized earth(MSE) structures can be analyzed either using limit equilibrium method(LEM) or strength reduction method(SRM) in finite element/difference method. In LEM, the strengths of the reinforcement members and soils are reduced with the same factor. While using the SRM, only soil strength is reduced during the calculation of the factor of safety. This causes inconsistence in calculating the factor of safety of the MSE structures. To overcome this, an iteration method is proposed to consider the strength reduction of the reinforcements in SRM. The method is demonstrated by using PLAXIS, a finite element software. The results show that the factor of safety converges after a few iterations. The reduction of strength has different effects on the factor of safety depending on the properties of the reinforcements and the soil, and failure modes.
文摘A new type of vortex structure-binucleus-type vortex structure-is presented in this paper. It is charac-terized by two nuclear columns which distinguish it from uninuclcus-type vorlex structure. The vortical sur-faces of the structure are commonly s-shaped and reversed s-shaped and subordinately of clliptic andhyperbolic shape. and sometimes turbine-like surfaces are observed. On the basis of field structural studies. a mechanical model of rotation around a binuclear column ofcrustal materials is presented in the paper. Burgers viscoelastic solutions of the stress field and deformationfield of this structural type have been obtained using the principle and method of rheology. and simulation ex-periments have been performed. The results of the theoretical calculation and experiments indicate that theproposed mechanical model is applicable.
基金College Student Innovation andEntrepreneurship Project(Grant No.:S202414435026)ingkou Institute of Technology campus level research project——Development of food additive supercritical extraction equipment and fluid transmission systemresearch(Grant No.HX202427).
文摘With the acceleration of the global aging process and the increase of cardiovascular ancerebrovascular diseases,more and more patients are paralyzed due to accidents,so theexoskeleton robot began to appear in people's sight,and the lower limb exoskeleton robot withrehabilitation training is also favored by more and more people.In this paper,the structural designand analysis of the lower limb exoskeleton robot are carried out in view of the patients'expectation ofnormal walking.First,gait analysis and structural design of lower limb exoskeleton robot.Based onthe analysis of the walking gait of normal people,the freedom of the three key joints of the lower limbexoskeleton robot hip joint,knee joint and ankle joint is determined.at the same time,according tothe structuralcharacteristics of each joint,the three key joints are modeled respectively,and theoverall model assembly of the lower limb exoskeleton robot is completed.Secondly,the kinematicsanalysis of the lower limb exoskeleton robot was carried out to obtain the relationship between thelinear displacement,linear speed and acceleration of each joint,so as to ensure the coordination ofthe model with the human lower limb movement.Thirdly,the static analysis of typical gait of hipjoint,knee joint and ankle joint is carried out to verify the safety of the design model under thepremise of ensuring the structural strength requirements.Finally,the parts of the model were 3Dprinted,and the rationality of the design was further verified in the process of assembling the model.
基金Supported by National Natural Science Foundation of China(Grant No.51375288)Science and Technology Program of Guangdong Province of China(Grant No.2020ST004)+1 种基金Department of Education of Guangdong Province of China(Grant No.2017KZDXM036and Special Project for Science and Technology Innovation Team of Foshan City of China(Grant No.2018IT100052).
文摘As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles,the traditional robots cannot accomplish these mentioned complex operational tasks and meet the dexterity demands.The hyper-redundant bionic robots can complete complex tasks in the unstructured environments by simulating the motion characteristics of the elephant’s trunk and octopus tentacles.Compared with traditional robots,the hyper-redundant bionic robots can accomplish complex tasks because of their flexible structure.A hyper-redundant elephant’s trunk robot(HRETR)with an open structure is developed in this paper.The content includes mechanical structure design,kinematic analysis,virtual prototype simulation,control system design,and prototype building.This design is inspired by the flexible motion of an elephant’s trunk,which is expansible and is composed of six unit modules,namely,3UPS-PS parallel in series.First,the mechanical design of the HRETR is completed according to the motion characteristics of an elephant’s trunk and based on the principle of mechanical bionic design.After that,the backbone mode method is used to establish the kinematic model of the robot.The simulation software SolidWorks and ADAMS are combined to analyze the kinematic characteristics when the trajectory of the end moving platform of the robot is assigned.With the help of ANSYS,the static stiffness of each component and the whole robot is analyzed.On this basis,the materials of the weak parts of the mechanical structure and the hardware are selected reasonably.Next,the extensible structures of software and hardware control system are constructed according to the modular and hierarchical design criteria.Finally,the prototype is built and its performance is tested.The proposed research provides a method for the design and development for the hyper-redundant bionic robot.
文摘The Larry Nassar scandal at Michigan State University is the worst and most widespread case of childhood sex abuse in this nation’s history to date,affecting over 150 young girls and women.This article asks:What were the structural and ideological mechanisms,policies,and practices that enabled this widespread abuse over a thirty-year period?Louis Althusser’s Marxist theory of Ideological State Apparatuses(and feminist responses to this theory)is useful in explaining how state-making institutions-media outlets,universities,athletic organizations,and family units-are not only produced and reproduced along class lines,but also with respect to gendered power dynamics.By examining the patriarchal nature of ISAs,one can begin to understand how Larry Nassar was for so long shielded from suspicion and criminal prosecution by the institutions that employed him.
基金supported by the National Natural Science Foundation of China(No.11722217)the Tsinghua University,China Initiative Scientific Research Program(No.2019Z08QCX10)the Institute for Guo Qiang,Tsinghua University,China(No.2019GQG1012)。
文摘Over the past decade,multistable mechanical metamaterials have been widely investigated because of their novel shape reconfigurability and programmable energy landscape.The ability to reversibly reshape among diverse stable states with different energy levels represents the most important feature of the multistable mechanical metamaterials.We summarize main design strategies of multistable mechanical metamaterials,including those based on self-assembly scheme,snap-through instability,structured mechanism and geometrical frustration,with a focus on the number and controllability of accessible stable states.Then we concentrate on unusual mechanical properties of these multistable mechanical metamaterials,and present their applications in a wide range of areas,including tunable electromagnetic devices,actuators,robotics,and mechanical logic gates.Finally,we discuss remaining challenges and open opportunities of designs and applications of multistable mechanical metamaterials.
基金supported by the National Natural Science Foundation of China(Grant No.41402126)
文摘ObjectiveThis study aims to characterize the occurrences and interior structural features of botryoidal structures from the Sinian Dengying Formation in the Sichuan Basin of Southwestern China, and to shed light on their formation mechanism.
基金supported by the National Natural Science Foundation of China,China(52203066,51973157,51673148 and 51678411)the Science and Technology Plans of Tianjin,China(19PTSYJC00010)+3 种基金China Postdoctoral Science Foundation Grant,China(2019M651047)the Tianjin Research Innovation Project for Postgraduate Students,China(2020YJSB062)the Tianjin Municipal College Student’Innovation And Entrepreneurship Training Program,China(202110058052)the National Innovation and Entrepreneurship Training Program for College Students,China(202110058017)。
文摘Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a central role in clean energy conversion,enabling a number of sustainable processes for future air battery technologies.Fluorine,as the most electronegative element(4.0)not only can induce more efficient regulation for the electronic structure,but also can bring more abundant defects and other novel effects in materials selection and preparation for favorable catalysis with respect to the other nonmetal elements.However,an individual and comprehensive overview of fluorine-containing functional materials for oxygen electrocatalysis field is still blank.Therefore,it is very meaningful to review the recent progresses of fluorine-containing oxygen electrocatalysts.In this review,we first systematically summarize the controllable preparation methods and their possible development directions based on fluorine-containing materials from four preparation methods.Due to the strong electron-withdrawing properties of fluorine,its control of the electronic structure can effectively enhance the oxygen electrocatalytic activity of the materials.In addition,the catalytic enhancement effect of fluorine on carbonbased materials also includes the prevent oxidation and the layer peeling,and realizes the precise atomic control.And the catalytic improvement mechanism of fluorine containing metal-based compounds also includes the hydration of metal site,the crystal transformation,and the oxygen vacancy induction.Then,based on their various dimensions(0D–3D),we also have summarized the advantages of different morphologies on oxygen electrocatalytic performances.Finally,the prospects and possible future researching direction of F-containing oxygen electrocatalysts are presented(e.g.,novel pathways,advanced methods for measurement and simulation,field assistance and multi-functions).The review is considered valuable and helpful in exploring the novel designs and mechanism analyses of advanced fluorine-containing electrocatalysts.
基金Supported by the National Natural Science Foundation of China under Grant No 50871009, the National Magnetic Confinement Fusion Program under Grant No 2009GB106003, and the Fundamental Research Funds for the Central Universities under Grant No YWF-10-01-B20.
文摘We investigate the structure, energetics, and the ideal tensile strength of tungsten （W） with hydrogen （H） using a first-principles method. Both density of states （DOS） and the electron localization function （ELF） reveal the underlying physical mechanism that the tetrahedral interstitial H is the most energetically favorable. The firstprinciples computational tensile test （FPCTT） shows that the ideal tensile strength is 29.1 GPa at the strain of 14% along the [001] direction for the intrinsic W, while it decreases to 27.1 GPa at the strain of 12% when one impurity H atom is embedded into the bulk W. These results provide a useful reference to understand W as a plasma facing material in the nuclear fusion Tokamak.
文摘In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.
基金Science Council of Shandong Province!under Grant No.89F0274
文摘The curved martensite structures have been observed in CuZnAI-based shape memory alloys by both transmission electron microscope and optical microscope. It was found that the curved martensite structures observed in as-solution treated, as-aged and as-trained alloys usually occurred around dislocation tangles or precipitate, at the plate boundary or grain boundary, and when the growing plates collided with each other or alternate mutually.
文摘Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and extended X-ray absorption fine structure (EXAFS). The powder obtained after milling is of single fcc structure with grain size of nanometer order. The Mossbauer spectra of the milled powder can be fitted by two subspectra whose hyperfine magnetic fields are 16 MA/m and 20 MA/m while that of pure Fe disappeared. EXAFS results show that the radial structure function (RSF) of Fe K-edge changed drastically and finally became similar to that of reference Cu K-edge, while that of Cu K-edge nearly keeps unchanged in the process of milling. These imply that bcc Fe really transforms to fcc structure and alloying between Fe and Cu occurs truly on an atomic scale. EXAFS results indicate that iron atoms tend to segregate at the boundaries and Cu atoms are rich in the fcc lattice. Annealing experiments show that the Fe atoms at the interfaces are easy to cluster to α-Fe at a lower temperature, whereas the iron atoms in the lattice will form γ-Fe first at temperature above 350℃, and then transform to bcc Fe
