The deformation and failure mechanical mechanism in soft rock roadway is related to the stability of supported tunnels, which is important to coal mine production and construction. By physical mechanics experiments an...The deformation and failure mechanical mechanism in soft rock roadway is related to the stability of supported tunnels, which is important to coal mine production and construction. By physical mechanics experiments and X-ray diffraction （XRD） tests, the engineering mechanical properties of soft rock, as well as main mineral composition of the surrounding soft rock of Qigou Coal Mine, were obtained. Based on analysis results, a method using bolt-beam-net combination to support was put forward. Mechanical analysis of the support form was done by using the calculation software FLAC3D. Results show that clay minerals of this mine are kaolinite and illite mixed layer, of which the water absorption is relatively obvious and presented mudding characteristic after absorbing water, with the plasticity index of 0.35, with small expansibility, which is weakly consolidated colloid with strong connected force in unit cell. The rock blocks have the characteristics of moisture absorption softening, and the deformation mechanical mechanism of which is with the coexistence of molecular expansive mechanism, colloid expansive mechanism, and weak layer trend type. The calculation results show that the bolt-beam-net support structure makes the bolt, beam, and roof deform compatibly. The beams make the force in the bolt relatively homogeneous, which restricts the displacement of the tunnel roof as well. Finally, using in situ monitoring, the numerical results were verified.展开更多
A simple model of chromatographic mechanical mechanism is present, and then a scrics of theoretical chromatographic equations and fundamental Formulae are derived. These theoretical equations and formulae not only res...A simple model of chromatographic mechanical mechanism is present, and then a scrics of theoretical chromatographic equations and fundamental Formulae are derived. These theoretical equations and formulae not only reserve thermodynamic characteristics in the current fundamental chromatographic formulae, but also introduce one or more kinetic parameter, so it is possible to make the macroscopic-control on the effect of kinetic characteristics on chromatographic system.展开更多
The rapid advancement of wearable electronic devices has paved the way for a more intelligent and interconnected world.However,ensuring the sustainable energy supply for these devices remains a critical challenge,part...The rapid advancement of wearable electronic devices has paved the way for a more intelligent and interconnected world.However,ensuring the sustainable energy supply for these devices remains a critical challenge,particularly for specialized populations and professionals in demanding environments,where a lack of power can pose life-threatening risks.Herein,we propose a mechanically intelligent biomechanical energy harvesting approach that adapts to complex human motion excitations,thereby improving the energy harvesting performance.Leveraging a mechanical intelligence mechanism,the energy harvester aligns with human physiological habits,selectively activating or deactivating as needed.The system can also adapt to excitations of varying directions,amplitudes,and frequencies.Furthermore,the string tension helps reduce the impact forces on the knee joint during foot strikes.A theoretical model for the biomechanical energy harvesting system is developed to describe its dynamic and electrical characteristics,and a prototype is fabricated and tested under diverse conditions.The experimental results are in good agreement with the simulation trends,validating the effectiveness of the theoretical model.A test subject running at 8 km/h for 90 seconds can successfully power a smartphone for 20 seconds,demonstrating the viability of self-powered applications.This mechanically intelligent biomechanical energy harvesting method holds a promising solution for the sustainable power supply for wearable electronic devices.展开更多
To address the issue of post-rolling warpage caused by differences in material properties during the composite rolling process of steel/aluminum thin strips,stress analysis was conducted at the entrance,middle,and exi...To address the issue of post-rolling warpage caused by differences in material properties during the composite rolling process of steel/aluminum thin strips,stress analysis was conducted at the entrance,middle,and exit sides of the rolling deformation zone for both steel and aluminum units.The unequal characteristics of the upper and lower contact arc lengths and the micromoment phenomenon,generated by the transfer of force between adjacent units on the aluminum side,were analyzed to explain the mechanical mechanism of warpage in the composite rolling process.A formula for calculating the contact arc length in the upper and lower rolling deformation zones was derived using the relationships among the contact arc length,rolling force,roll parameters,and strip parameters.On the basis of the deformation characteristics of steel and aluminum in the rolling deformation zone,the concepts of the inlet half-rolling zone,relative sliding zone,rolling composite zone,and outlet half-rolling zone were proposed.A quantitative model for characterizing warpage during the composite rolling of steel/aluminum composite thin strips was established.These results indicate that adjusting the diameters of the upper and lower work rolls is an effective method for controlling warpage defects and that warpage plays a dominant role in steel/aluminum thin strip composite rolling.Furthermore,finite element simulations of steel/aluminum composites rolled with different upper and lower roll diameters verified the deformation mechanism and influence of roll diameter differences on warpage defects.展开更多
A NiAl/TiB2 nanocomposite is synthesized by mechanical alloying elemental powders. Upon milling for a certain time, an abrupt exothermic reaction occurs and a large amount of NiAl and TiB2 compounds form simultaneousl...A NiAl/TiB2 nanocomposite is synthesized by mechanical alloying elemental powders. Upon milling for a certain time, an abrupt exothermic reaction occurs and a large amount of NiAl and TiB2 compounds form simultaneously. It is suggested that two separate chemical reactions,i.e. Ni+Al →NiAl and Ti+2B→TiB2, are involved during the exothermic reaction. Additionof Ti and B to Ni-Al system impedes the structural evolution of Ni and Al powders and delays the abrupt reaction. The final products are equilibrium phases without any metastable phases formed. This type of reaction is suggested to be suitable for alloy systems with two large heatrelease reactions.展开更多
In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on,mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were ...In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on,mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were conducted in the key materials mechanics lab of Liaoning province.The experimental results show that adding waste glass particles can improve the grain size distribution of tailings.The effect is proportional to the content.The compressive strength of tailings mortar has increased significantly.The fineness modulus of tailings mortar mixture adding waste glass powder was gradually reducing with the increase of the dosage of waste glass powder,but the compressive strength of the mixture has gradually enhanced with the increase of the dosage.Microscopic analysis shows that the waste glass particles in the mortar mainly play a role of coarse aggregate and glass powder after grinding fine below a certain size shows strong volcanic activity,which can act hydration with tailings,at the same time glass powder also,plays a role in fine aggregate filling.Therefore,all of glass particles and glass powder can be used as the additive material for improving and optimizing the mechanical property of tailings mortar.展开更多
Underground engineering often passes through water-rich fractured rock masses, which are prone to fracture and instability under the long-term coupling of in-situ stress field and pore water(P-W) pressure, ultimately ...Underground engineering often passes through water-rich fractured rock masses, which are prone to fracture and instability under the long-term coupling of in-situ stress field and pore water(P-W) pressure, ultimately threatening the stability of underground structures. In order to explore the mechanical properties of rocks under H-M coupling, the corresponding damage constitutive(D-C) model has become the focus of attention. Considering the inadequacy of the current research on rock strength parameters,energy evolution characteristics and D-C model under H-M coupling, the mechanical properties of typical sandstone samples are discussed based on laboratory tests. The results show that the variation of characteristic stresses of sandstone under H-M coupling conforms to the normalized attenuation equation and Mohr-Coulomb(M-C) criterion. The P-W pressure mechanism of sandstone exhibits a dynamic change from softening effect to H-M fracturing effect. The closure stress is mainly provided by cohesive strength, while the initiation stress, damage stress, and peak stress are jointly dominated by cohesive strength and friction strength. In addition, residual stress is attributed to the friction strength formed by the bite of the fracture surface. Subsequently, the energy evolution characteristics of sandstone under H-M coupling were studied, and it was found that P-W pressure weakened the energy storage capacity and energy dissipation capacity of sandstone, and H-M fracturing was an important factor in reducing its energy storage efficiency. Finally, combined with energy dissipation theory and statistical damage theory, two types of D-C models considering P-W pressure are proposed accordingly, and the model parameters can be determined by four methods. The application results indicate that the proposed and modified D-C models have high reliability, and can characterize the mechanical behavior of sandstone under H-M coupling, overcome the inconvenience of existing D-C models due to excessive mechanical parameters,and can be applied to the full-range stress–strain process. The results are conducive to revealing the deformation and damage mechanisms of rocks under H-M coupling, and can provide theoretical guidance for related engineering problems.展开更多
Two-dimensional(2D)materials have attracted extensive attention from aerospace,integrated circuits,precision sensors,and flexible electronics due to their unique layered structure and excellent physicochemical propert...Two-dimensional(2D)materials have attracted extensive attention from aerospace,integrated circuits,precision sensors,and flexible electronics due to their unique layered structure and excellent physicochemical properties.In practice applications,the components of functional nanodevices are subjected to mechanical stress,which can affect the robust performance and structural reliability of these devices.Therefore,it is imperative to explore the mechanical properties and underlying mechanisms of 2D materials.However,researchers have an inadequate understanding of the accuracy of various in situ microscopy techniques and neglect the significance of high-quality,clean transfer techniques,resulting in deviated measurement results.There is now an urgent need to develop guidelines that allow researchers to select appropriate material transfer techniques and mechanical testing strategies based on the specific properties of 2D materials.Furthermore,the mechanical mechanism of 2D materials lacks systematic and comprehensive studies,which hinders researchers from deeply understanding the relationship between the material structure and the device performance.This work reviews the latest progress in the mechanics of 2D materials,focusing on the challenges of various transfer techniques and in situ microscopy techniques in mechanical testing,and provides effective guidance for the formulation of experimental schemes for mechanical testing.In addition,we offer detailed mechanistic insights into the fracture behavior,geometric dimension effects,edge defects,and interlayer bonding effects of 2D materials.This work is expected to advance the field development of 2D material mechanics.展开更多
Mechanical properties of microalloying Mg-2.2Zn-1.8Ca-0.5Mn(wt%)matrix composites reinforced by 0.5 wt%TiC nanoparticles before and after extrusion were investigated based on the detailed microstructural analysis.A un...Mechanical properties of microalloying Mg-2.2Zn-1.8Ca-0.5Mn(wt%)matrix composites reinforced by 0.5 wt%TiC nanoparticles before and after extrusion were investigated based on the detailed microstructural analysis.A uniform distribution of TiC nanoparticles was realized in the nanocomposite by the method of ultrasonic-assisted semisolid stirring.The morphology of eutectic Ca2Mg6Zn3 phases changed from plate-like in the free TiC nanoparticles region to lamellar in the dense TiC nanoparticles region for the as-cast nanocomposite.Both the grain structure and precipitates were obviously refined as the extrusion temperature decreased from 350 to 270℃.The nanocomposite exhibited excellent tensile yield strength(352-428 MPa)which was governed by the extrusion temperature.The grain refinement strengthening with the contribution ratio of^80%to this strength increment was much higher relative to thermal expansion effect,Orowan strengthening and dislocation strengthening.Ultrafine recrystallized grain structure with a substantial of ne precipitates appeared in the nanocomposite extruded at 270℃.The refined grain structure was not only due to dynamic recrystallization,but also the synergistic pinning effect of nano-TiCp,precipitated MgZn2 andα-Mn particles.The tensile toughness value of nanocomposite after extrusion improved with increasing the extrusion temperature.Massive micro-cracks formed along the remnant coarse Ca2Mg6Zn3 led to the structural failure during tension.展开更多
Engineering geomechanics characteristics of roadways in deep soft rock at Hegang Xing'an Coal Mine were studied and the nature of clay minerals of roadway surrounding rock was analyzed. This paper is to solve the ...Engineering geomechanics characteristics of roadways in deep soft rock at Hegang Xing'an Coal Mine were studied and the nature of clay minerals of roadway surrounding rock was analyzed. This paper is to solve the technical problems of high stress and the difficulty in supporting the coal mine, and provide a rule for the support design. Results show that mechanical deformation mechanisms of deep soft rock roadway at Xing'an Coal Mine is of ⅠABⅡABCⅢABCD type, consisting of molecular water absorption (the ⅠAB -type), the tectonic stress type + gravity deformation type + hydraulic type (the ⅡABC -type), and the ⅢABCD -type with fault, weak intercalation and bedding formation. According to the compound mechanical deformation mechanisms, the corresponding mechanical control measures and conversion technologies were proposed, and these technologies have been successfully applied in roadway supporting practice in deep soft rock at Xing'an Coal Mine with good effect. Xing'an Coal Mine has the deepest burial depth in China, with its overburden ranging from Mesozoic Jurassic coal-forming to now. The results of the research can be used as guidance in the design of roadway support in soft rock.展开更多
To study the mechanical and damage evolution properties of sandstone under triaxial compression, we analyzed the stress strain curve characteristics, deformation and strength properties, and failure process and charac...To study the mechanical and damage evolution properties of sandstone under triaxial compression, we analyzed the stress strain curve characteristics, deformation and strength properties, and failure process and characteristics of sandstone samples under different stress states. The experimental results reveal that peak strength, residual strength, elasticity modulus and deformation modulus increase linearly with confining pressure, and failure models transform from fragile failure under low confining pressure to ductility failure under high confining pressure. Macroscopic failure forms of samples under uniaxial compression were split failure parallel to the axis of samples, while macroscopic failure forms under uniaxial compression were shear failure, the shear failure angle of which decreased linearly with confin- ing pressure. There were significant volume dilatation properties in the loading process of sandstone under different confining pressures, and we analyzed the damage evolution properties of samples based on acoustic emission damage and volumetric dilatation damage, and established damage constitutive model, realizing the real-time Quantitative evaluation of samnles damage state in loading process.展开更多
The optimization of metamorphic mechanisms is different from that of the conventional mechanisms for its characteristics of multi-configuration. There exist complex coupled design variables and constraints in its mult...The optimization of metamorphic mechanisms is different from that of the conventional mechanisms for its characteristics of multi-configuration. There exist complex coupled design variables and constraints in its multiple different configuration optimization models. To achieve the compatible optimized results of these coupled design variables, an optimization method for metamorphic mechanisms is developed in the paper based on the principle of multidisciplinary design optimization（MDO）. Firstly, the optimization characteristics of the metamorphic mechanism are summarized distinctly by proposing the classification of design variables and constraints as well as coupling interactions among its different configuration optimization models. Further, collaborative optimization technique which is used in MDO is adopted for achieving the overall optimization performance. The whole optimization process is then proposed by constructing a two-level hierarchical scheme with global optimizer and configuration optimizer loops. The method is demonstrated by optimizing a planar five-bar metamorphic mechanism which has two configurations,and results show that it can achieve coordinated optimization results for the same parameters in different configuration optimization models.展开更多
By surface mechanical attrition treatment（SMAT）,a gradient nano structure（GNS） from the surface to center was generated in the AZ31 alloy sheet.The tribological behavior of AZ31 alloy with GNS was systematically i...By surface mechanical attrition treatment（SMAT）,a gradient nano structure（GNS） from the surface to center was generated in the AZ31 alloy sheet.The tribological behavior of AZ31 alloy with GNS was systematically investigated by using dry sliding tests,a 3D surface profile-meter and a scanning electron microscope equipped with an energy-dispersive spectrometer.The experimental results indicate that the Mg alloy with GNS exhibits better wear resistance comparing to the as-received sample,which is associated to the alteration of wear mechanism at different sliding speeds.The Mg alloy with GNS presents the wear mechanism of the abrasive wear at 0.05 m/s and the oxidative wear at 0.5 m/s,respectively.Moreover,the GNS can effectively promote the reaction between the oxygen and worn surface,which leads to a compact oxidation layer at 0.5 m/s.The effect of oxidation layer on the wear resistance of the Mg alloy was also discussed.展开更多
Conventional overconstrained parallel manipulators have been widely studied both in industry and academia,however the structural synthesis of hybrid mechanisms with additional constraints is seldom studied,especially ...Conventional overconstrained parallel manipulators have been widely studied both in industry and academia,however the structural synthesis of hybrid mechanisms with additional constraints is seldom studied,especially for the four degrees of freedom（DOF） hybrid mechanisms.In order to develop a manipulator with additional constraints,a class of important spatial mechanisms with coupling chains（CCs） whose motion type is two rotations and two translations（2R2T） is presented.Based on screw theory,the combination of different types of limbs which are used to construct parallel mechanisms and coupling chains is proposed.The basic types of the general parallel mechanisms and geometric conditions of the kinematic chains are given using constraint synthesis method.Moreover,the 2R2T motion pattern hybrid mechanisms which are derived by adding coupling chains between different serial kinematic chains（SKCs） of the corresponding parallel mechanisms are presented.According to the constraint analysis of the mechanisms,the movement relationship of the moving platform and the kinematic chains is derived by disassembling the coupling chains.At last,fourteen novel hybrid mechanisms with two or three serial kinematic chains are presented.The proposed novel hybrid mechanisms and construction method enrich the family of the spatial mechanisms and provide an instruction to design more complex hybrid mechanisms.展开更多
As the major and abundant type of glucosinolates(GL)in plants,sinigrin has potential functions in promoting health and insect defense.The final step in the biosynthesis of sinigrin core structure is highly representat...As the major and abundant type of glucosinolates(GL)in plants,sinigrin has potential functions in promoting health and insect defense.The final step in the biosynthesis of sinigrin core structure is highly representative in GL compounds,which corresponds to the process from 3-methylthiopropyl ds-GL to 3-methylthiopropyl GL catalyzed by sulfotransferase(SOT).However,due to the lack of the crystallographic structure of SOT complexed with the 3-methylthiopropyl GL,little is known about this sulfonation process.Fortunately,the crystal structure of SOT 18 from Arabidopsis thaliana(At SOT18)containing the substance(sinigrin)similar to 3-methylthiopropyl GL has been determined.To understand the enzymatic mechanism,we employed molecular dynamics(MD)simulation and quantum mechanics combined with molecular mechanics(QM/MM)methods to study the conversion from ds-sinigrin to sinigrin catalyzed by AtSOT18.The calculated results demonstrate that the reaction occurs through a concerted dissociative mechanism.Moreover,Lys93,Thr96,Thr97,Tyr130,His155,and two enzyme peptide chains(Pro92-Lys93 and Gln95-Thr96-Thr97)play a role in positioning the substrates and promoting the catalytic reaction by stabilizing the transition state geometry.Particularly,His155 acts as a catalytic base while Lys93 acts as a catalytic acid in the reaction process.The presently proposed concerted dissociative mechanism explains the role of At SOT18 in sinigrin biosynthesis,and could be instructive for the study of GL biosynthesis catalyzed by other SOTs.展开更多
Structural fatigue of NiTi shape memory alloys is a key issue that should be solved in order to promote their engineering applications and utilize their unique shape memory effect and super-elasticity more sufficientl...Structural fatigue of NiTi shape memory alloys is a key issue that should be solved in order to promote their engineering applications and utilize their unique shape memory effect and super-elasticity more sufficiently. In this paper, the latest progresses made in experimental and theoretical analyses for the structural fatigue features of NiTi shape memory alloys are reviewed. First, macroscopic experimental observations to the pure mechanical and thermo-mechanical fatigue features of the alloys are summarized; then the state-of-arts in the mechanism analysis of fatigue rupture are addressed; further, advances in the construction of fatigue failure models are provided; finally, summary and future topics are outlined.展开更多
A series of silver-doped graphite-like carbon coatings was prepared on the surface of aluminum alloy using the magnetron sputtering method. The spontaneous escape behavior and inhibition mechanism of silver from graph...A series of silver-doped graphite-like carbon coatings was prepared on the surface of aluminum alloy using the magnetron sputtering method. The spontaneous escape behavior and inhibition mechanism of silver from graphite-like carbon coating were studied. The results showed that when the sample prepared with a 0.01-A current on the silver target was placed in an atmospheric environment for 0.5 h, an apparent silver escape phenomenon could be observed. However, the silver escape phenomenon was not observed for samples prepared with a 0.05-A current on the silver target if the sample was retained in a 10^（-1） Pa vacuum environment, even after 48 h. Compared with the sample placed in the atmospheric environment immediately after an ion plating process, the silver escape time lagged for 6 h. Nanometer-thick pure carbon coating coverage could effectively suppress silver escape. When the coating thickness reached700 nm, permanent retention of silver could be achieved in the silver-doped graphite-like carbon coating.As the silver residue content in the graphite-like carbon coating increased from 2.27 at.% to 5.35 at.%, the interfacial contact resistance of the coating decreased from 51mΩcm^2 to 6 mΩcm^2.展开更多
Surface mechanical attrition treatment（SMAT） has been recently applied to bulk polycrystalline magnesium（Mg） alloys with gradient grain size distribution from the impact surface to inside matrix, hence effectively...Surface mechanical attrition treatment（SMAT） has been recently applied to bulk polycrystalline magnesium（Mg） alloys with gradient grain size distribution from the impact surface to inside matrix, hence effectively improving the alloys＇ mechanical performances. However, in-depth understanding of their mechanical property enhancement and grain size-dependent fracture mechanism remains unclear. Here,we demonstrated the use of in situ micro-tensile testing inside a high resolution scanning electron microscope（SEM） to characterize the microstructure evolution, in real time, of SMATed Mg alloy AZ31 samples with different grain sizes of ~10 μm（＇coarse-grain sample＇） and ~5 μm（＇fine-grain sample＇）, respectively, and compared the results with those of a raw Mg alloy AZ31. The quantitative tensile tests with in situ SEM imaging clearly showed that fracture of ‘fine-grain sample＇ was dominated by intergranular cracks,while both trans-granular and intergranular cracks led to the final failure of the ‘coarse-grain samples＇.It is expected that this in situ SEM characterization technique, coupled with quantitative tensile testing method, could be applicable for studying other grain-refined metals/alloys, allowing to optimize their mechanical performances by controlling the grain sizes and their gradient distribution.展开更多
Based on particle flow theory, the influences of the magnitude and direction of the intermediate principal stress on failure mechanism of hard rock with a pre-existing circular opening were studied by carrying out tru...Based on particle flow theory, the influences of the magnitude and direction of the intermediate principal stress on failure mechanism of hard rock with a pre-existing circular opening were studied by carrying out true triaxial tests on siltstone specimen. It is shown that peak strength of siltstone specimen increases firstly and subsequently decreases with the increase of the intermediate principal stress. And its turning point is related to the minimum principal stress and the direction of the intermediate principal stress. Failure characteristic(brittleness or ductility) of siltstone is determined by the minimum principal stress and the difference between the intermediate and minimum principal stress. The intermediate principal stress has a significant effect on the types and distributions of microcracks. The failure modes of the specimen are determined by the magnitude and direction of the intermediate principal stress, and related to weakening effect of the opening and inhibition effect of confining pressure in essence: when weakening effect of the opening is greater than inhibition effect of confining pressure, the failure surface is parallel to the x axis(such as σ2=σ3=0 MPa); conversely, the failure surface is parallel to the z axis(such as σ2=20 MPa, σ3=0 MPa).展开更多
Rapidly solidified 2024 aluminium alloy powders were mechanically milled, then consolidated to bulk form. The microstructural changes of the powders in mechanical milling (MM) and consolidation process were characteri...Rapidly solidified 2024 aluminium alloy powders were mechanically milled, then consolidated to bulk form. The microstructural changes of the powders in mechanical milling (MM) and consolidation process were characterized by X-ray diffraction analyses and transmission electron microscopy observations. The results showed that mechanical milling reduced the grain size to nanometer, dissolved the Al2Cu intermetallic compound into the aluminium matrix and produced an aluminium supersaturated solid solution. During consolidation process. the grain size increased to submicrometer, and the Al2Cu and Al2(Cu, Mg, Si, Fe, Mn) compounds precipitated owing to heating. Increasing consolidation temperature and time results in obvious grain growth and coarsening of second phase particles. The tensile yield strength of the consolidated alloy with submicrometer size grains increases with decreasing grain size, and it follows the famous HallPetch relation展开更多
基金Supported by the Natural Science Foundation of China （50974126） the Specific Scientific Research Fund for Doctorial Subject （20100023120003） the Major Science and Technology Projects funded by the Ministry of Education （109034）
文摘The deformation and failure mechanical mechanism in soft rock roadway is related to the stability of supported tunnels, which is important to coal mine production and construction. By physical mechanics experiments and X-ray diffraction （XRD） tests, the engineering mechanical properties of soft rock, as well as main mineral composition of the surrounding soft rock of Qigou Coal Mine, were obtained. Based on analysis results, a method using bolt-beam-net combination to support was put forward. Mechanical analysis of the support form was done by using the calculation software FLAC3D. Results show that clay minerals of this mine are kaolinite and illite mixed layer, of which the water absorption is relatively obvious and presented mudding characteristic after absorbing water, with the plasticity index of 0.35, with small expansibility, which is weakly consolidated colloid with strong connected force in unit cell. The rock blocks have the characteristics of moisture absorption softening, and the deformation mechanical mechanism of which is with the coexistence of molecular expansive mechanism, colloid expansive mechanism, and weak layer trend type. The calculation results show that the bolt-beam-net support structure makes the bolt, beam, and roof deform compatibly. The beams make the force in the bolt relatively homogeneous, which restricts the displacement of the tunnel roof as well. Finally, using in situ monitoring, the numerical results were verified.
文摘A simple model of chromatographic mechanical mechanism is present, and then a scrics of theoretical chromatographic equations and fundamental Formulae are derived. These theoretical equations and formulae not only reserve thermodynamic characteristics in the current fundamental chromatographic formulae, but also introduce one or more kinetic parameter, so it is possible to make the macroscopic-control on the effect of kinetic characteristics on chromatographic system.
基金Project supported by the National Natural Science Foundation of China(Nos.12202262,12172127,12032015,and 12121002)the Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(No.2023QNRC001)the Hunan Province Science and Technology Innovation Program of China(Nos.2025JJ20012 and 2025RC4022)。
文摘The rapid advancement of wearable electronic devices has paved the way for a more intelligent and interconnected world.However,ensuring the sustainable energy supply for these devices remains a critical challenge,particularly for specialized populations and professionals in demanding environments,where a lack of power can pose life-threatening risks.Herein,we propose a mechanically intelligent biomechanical energy harvesting approach that adapts to complex human motion excitations,thereby improving the energy harvesting performance.Leveraging a mechanical intelligence mechanism,the energy harvester aligns with human physiological habits,selectively activating or deactivating as needed.The system can also adapt to excitations of varying directions,amplitudes,and frequencies.Furthermore,the string tension helps reduce the impact forces on the knee joint during foot strikes.A theoretical model for the biomechanical energy harvesting system is developed to describe its dynamic and electrical characteristics,and a prototype is fabricated and tested under diverse conditions.The experimental results are in good agreement with the simulation trends,validating the effectiveness of the theoretical model.A test subject running at 8 km/h for 90 seconds can successfully power a smartphone for 20 seconds,demonstrating the viability of self-powered applications.This mechanically intelligent biomechanical energy harvesting method holds a promising solution for the sustainable power supply for wearable electronic devices.
基金funded by National Natural Science Foundation of China(No.52305406)Basic Research Program Project in Shanxi(No.202303021212046)+2 种基金Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(No.2024Q008)Open Research Fund from National Key Laboratory of Metal Forming Technology and Heavy Equipment(No.S2308100.W15)Major Science and Technology Projects in Hebei(No.23280101Z).
文摘To address the issue of post-rolling warpage caused by differences in material properties during the composite rolling process of steel/aluminum thin strips,stress analysis was conducted at the entrance,middle,and exit sides of the rolling deformation zone for both steel and aluminum units.The unequal characteristics of the upper and lower contact arc lengths and the micromoment phenomenon,generated by the transfer of force between adjacent units on the aluminum side,were analyzed to explain the mechanical mechanism of warpage in the composite rolling process.A formula for calculating the contact arc length in the upper and lower rolling deformation zones was derived using the relationships among the contact arc length,rolling force,roll parameters,and strip parameters.On the basis of the deformation characteristics of steel and aluminum in the rolling deformation zone,the concepts of the inlet half-rolling zone,relative sliding zone,rolling composite zone,and outlet half-rolling zone were proposed.A quantitative model for characterizing warpage during the composite rolling of steel/aluminum composite thin strips was established.These results indicate that adjusting the diameters of the upper and lower work rolls is an effective method for controlling warpage defects and that warpage plays a dominant role in steel/aluminum thin strip composite rolling.Furthermore,finite element simulations of steel/aluminum composites rolled with different upper and lower roll diameters verified the deformation mechanism and influence of roll diameter differences on warpage defects.
文摘A NiAl/TiB2 nanocomposite is synthesized by mechanical alloying elemental powders. Upon milling for a certain time, an abrupt exothermic reaction occurs and a large amount of NiAl and TiB2 compounds form simultaneously. It is suggested that two separate chemical reactions,i.e. Ni+Al →NiAl and Ti+2B→TiB2, are involved during the exothermic reaction. Additionof Ti and B to Ni-Al system impedes the structural evolution of Ni and Al powders and delays the abrupt reaction. The final products are equilibrium phases without any metastable phases formed. This type of reaction is suggested to be suitable for alloy systems with two large heatrelease reactions.
基金Found by the National Natural Science Foundation of China(Nos.51279109 and 51474050)the Liaoning Education Department Funds(No.201364088)
文摘In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on,mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were conducted in the key materials mechanics lab of Liaoning province.The experimental results show that adding waste glass particles can improve the grain size distribution of tailings.The effect is proportional to the content.The compressive strength of tailings mortar has increased significantly.The fineness modulus of tailings mortar mixture adding waste glass powder was gradually reducing with the increase of the dosage of waste glass powder,but the compressive strength of the mixture has gradually enhanced with the increase of the dosage.Microscopic analysis shows that the waste glass particles in the mortar mainly play a role of coarse aggregate and glass powder after grinding fine below a certain size shows strong volcanic activity,which can act hydration with tailings,at the same time glass powder also,plays a role in fine aggregate filling.Therefore,all of glass particles and glass powder can be used as the additive material for improving and optimizing the mechanical property of tailings mortar.
基金funding support from the National Natural Science Foundation of China(Nos.52174088 and 42277154)the Independent Innovation Research Fund Graduate Free Exploration Project(No.104972024JYS0007)supported by Wuhan University of Technology.
文摘Underground engineering often passes through water-rich fractured rock masses, which are prone to fracture and instability under the long-term coupling of in-situ stress field and pore water(P-W) pressure, ultimately threatening the stability of underground structures. In order to explore the mechanical properties of rocks under H-M coupling, the corresponding damage constitutive(D-C) model has become the focus of attention. Considering the inadequacy of the current research on rock strength parameters,energy evolution characteristics and D-C model under H-M coupling, the mechanical properties of typical sandstone samples are discussed based on laboratory tests. The results show that the variation of characteristic stresses of sandstone under H-M coupling conforms to the normalized attenuation equation and Mohr-Coulomb(M-C) criterion. The P-W pressure mechanism of sandstone exhibits a dynamic change from softening effect to H-M fracturing effect. The closure stress is mainly provided by cohesive strength, while the initiation stress, damage stress, and peak stress are jointly dominated by cohesive strength and friction strength. In addition, residual stress is attributed to the friction strength formed by the bite of the fracture surface. Subsequently, the energy evolution characteristics of sandstone under H-M coupling were studied, and it was found that P-W pressure weakened the energy storage capacity and energy dissipation capacity of sandstone, and H-M fracturing was an important factor in reducing its energy storage efficiency. Finally, combined with energy dissipation theory and statistical damage theory, two types of D-C models considering P-W pressure are proposed accordingly, and the model parameters can be determined by four methods. The application results indicate that the proposed and modified D-C models have high reliability, and can characterize the mechanical behavior of sandstone under H-M coupling, overcome the inconvenience of existing D-C models due to excessive mechanical parameters,and can be applied to the full-range stress–strain process. The results are conducive to revealing the deformation and damage mechanisms of rocks under H-M coupling, and can provide theoretical guidance for related engineering problems.
基金National Natural Science Foundation of China(Grant.Nos.52422505,12274124)the Shanghai Pilot Program for Basic Research(Grant.No.22TQ14001006)+2 种基金National Natural Science Foundation of China(Grant No.52275149)the Scientific Research Innovation Capability Support Project for Young Faculty(Grant No.ZYGXQNJSKYCXNLZCXM-D5)Innovative Research Group Project of the National Natural Science Foundation of China(Grant.No.52321002)。
文摘Two-dimensional(2D)materials have attracted extensive attention from aerospace,integrated circuits,precision sensors,and flexible electronics due to their unique layered structure and excellent physicochemical properties.In practice applications,the components of functional nanodevices are subjected to mechanical stress,which can affect the robust performance and structural reliability of these devices.Therefore,it is imperative to explore the mechanical properties and underlying mechanisms of 2D materials.However,researchers have an inadequate understanding of the accuracy of various in situ microscopy techniques and neglect the significance of high-quality,clean transfer techniques,resulting in deviated measurement results.There is now an urgent need to develop guidelines that allow researchers to select appropriate material transfer techniques and mechanical testing strategies based on the specific properties of 2D materials.Furthermore,the mechanical mechanism of 2D materials lacks systematic and comprehensive studies,which hinders researchers from deeply understanding the relationship between the material structure and the device performance.This work reviews the latest progress in the mechanics of 2D materials,focusing on the challenges of various transfer techniques and in situ microscopy techniques in mechanical testing,and provides effective guidance for the formulation of experimental schemes for mechanical testing.In addition,we offer detailed mechanistic insights into the fracture behavior,geometric dimension effects,edge defects,and interlayer bonding effects of 2D materials.This work is expected to advance the field development of 2D material mechanics.
基金the National Natural Science Foundation of China[grant numbers 51771129,51401144 and 51771128]the Program for the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi+2 种基金the Scientific and Technologial Innovation Programs of Higher Education Institutions in Shanxithe Natural Science Foundation of Shanxi Province[grant numbers 2015021067 and 201601D011034]the Projects of International Cooperation in Shanxi[Grant no.201703D421039].
文摘Mechanical properties of microalloying Mg-2.2Zn-1.8Ca-0.5Mn(wt%)matrix composites reinforced by 0.5 wt%TiC nanoparticles before and after extrusion were investigated based on the detailed microstructural analysis.A uniform distribution of TiC nanoparticles was realized in the nanocomposite by the method of ultrasonic-assisted semisolid stirring.The morphology of eutectic Ca2Mg6Zn3 phases changed from plate-like in the free TiC nanoparticles region to lamellar in the dense TiC nanoparticles region for the as-cast nanocomposite.Both the grain structure and precipitates were obviously refined as the extrusion temperature decreased from 350 to 270℃.The nanocomposite exhibited excellent tensile yield strength(352-428 MPa)which was governed by the extrusion temperature.The grain refinement strengthening with the contribution ratio of^80%to this strength increment was much higher relative to thermal expansion effect,Orowan strengthening and dislocation strengthening.Ultrafine recrystallized grain structure with a substantial of ne precipitates appeared in the nanocomposite extruded at 270℃.The refined grain structure was not only due to dynamic recrystallization,but also the synergistic pinning effect of nano-TiCp,precipitated MgZn2 andα-Mn particles.The tensile toughness value of nanocomposite after extrusion improved with increasing the extrusion temperature.Massive micro-cracks formed along the remnant coarse Ca2Mg6Zn3 led to the structural failure during tension.
基金partially supported by program for the New Century Excellent Talents in University (No. NCET-08-0833)the National Natural Science Foundation of China (No. 41040027)the Special Fund of Basic Research and Operating Expenses of China University of Mining and Technology, Beijing
文摘Engineering geomechanics characteristics of roadways in deep soft rock at Hegang Xing'an Coal Mine were studied and the nature of clay minerals of roadway surrounding rock was analyzed. This paper is to solve the technical problems of high stress and the difficulty in supporting the coal mine, and provide a rule for the support design. Results show that mechanical deformation mechanisms of deep soft rock roadway at Xing'an Coal Mine is of ⅠABⅡABCⅢABCD type, consisting of molecular water absorption (the ⅠAB -type), the tectonic stress type + gravity deformation type + hydraulic type (the ⅡABC -type), and the ⅢABCD -type with fault, weak intercalation and bedding formation. According to the compound mechanical deformation mechanisms, the corresponding mechanical control measures and conversion technologies were proposed, and these technologies have been successfully applied in roadway supporting practice in deep soft rock at Xing'an Coal Mine with good effect. Xing'an Coal Mine has the deepest burial depth in China, with its overburden ranging from Mesozoic Jurassic coal-forming to now. The results of the research can be used as guidance in the design of roadway support in soft rock.
基金the National Natural Science Foundation of China (Nos.51323004 and 51574223)the Postdoctoral Science Foundation of China (No.2015M571842)the Open Research Fund of Research Center of Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology (No.SJXTY1502)
文摘To study the mechanical and damage evolution properties of sandstone under triaxial compression, we analyzed the stress strain curve characteristics, deformation and strength properties, and failure process and characteristics of sandstone samples under different stress states. The experimental results reveal that peak strength, residual strength, elasticity modulus and deformation modulus increase linearly with confining pressure, and failure models transform from fragile failure under low confining pressure to ductility failure under high confining pressure. Macroscopic failure forms of samples under uniaxial compression were split failure parallel to the axis of samples, while macroscopic failure forms under uniaxial compression were shear failure, the shear failure angle of which decreased linearly with confin- ing pressure. There were significant volume dilatation properties in the loading process of sandstone under different confining pressures, and we analyzed the damage evolution properties of samples based on acoustic emission damage and volumetric dilatation damage, and established damage constitutive model, realizing the real-time Quantitative evaluation of samnles damage state in loading process.
基金the fundamental support of the National Natural Science Foundation of China (Nos. 51105013, 51125020)the Beijing Natural Science Foundation of China (No. 3133042)the fundamental support provided by the China Scholarship Council and the State Key Laboratory of Robotics and System (HIT)
文摘The optimization of metamorphic mechanisms is different from that of the conventional mechanisms for its characteristics of multi-configuration. There exist complex coupled design variables and constraints in its multiple different configuration optimization models. To achieve the compatible optimized results of these coupled design variables, an optimization method for metamorphic mechanisms is developed in the paper based on the principle of multidisciplinary design optimization（MDO）. Firstly, the optimization characteristics of the metamorphic mechanism are summarized distinctly by proposing the classification of design variables and constraints as well as coupling interactions among its different configuration optimization models. Further, collaborative optimization technique which is used in MDO is adopted for achieving the overall optimization performance. The whole optimization process is then proposed by constructing a two-level hierarchical scheme with global optimizer and configuration optimizer loops. The method is demonstrated by optimizing a planar five-bar metamorphic mechanism which has two configurations,and results show that it can achieve coordinated optimization results for the same parameters in different configuration optimization models.
基金National Key Research and Development Program(No.2016YFB0701201)National Natural Science Foundation of China(Nos.51671101,51464034)+3 种基金Natural Science foundation of Jiangxi Province(No.20161ACB21003)the Scientific Research Foundation of the Education Department of Jiangxi Province(No.GJJ150010)the financial support provided by the Croucher Foundation(No.9500006)Hong Kong Collaborative Research Fund(CRF)Scheme(No.C4028-14G)
文摘By surface mechanical attrition treatment（SMAT）,a gradient nano structure（GNS） from the surface to center was generated in the AZ31 alloy sheet.The tribological behavior of AZ31 alloy with GNS was systematically investigated by using dry sliding tests,a 3D surface profile-meter and a scanning electron microscope equipped with an energy-dispersive spectrometer.The experimental results indicate that the Mg alloy with GNS exhibits better wear resistance comparing to the as-received sample,which is associated to the alteration of wear mechanism at different sliding speeds.The Mg alloy with GNS presents the wear mechanism of the abrasive wear at 0.05 m/s and the oxidative wear at 0.5 m/s,respectively.Moreover,the GNS can effectively promote the reaction between the oxygen and worn surface,which leads to a compact oxidation layer at 0.5 m/s.The effect of oxidation layer on the wear resistance of the Mg alloy was also discussed.
基金Supported by National Natural Science Foundation of China(Grant Nos.51175029,51475035)
文摘Conventional overconstrained parallel manipulators have been widely studied both in industry and academia,however the structural synthesis of hybrid mechanisms with additional constraints is seldom studied,especially for the four degrees of freedom（DOF） hybrid mechanisms.In order to develop a manipulator with additional constraints,a class of important spatial mechanisms with coupling chains（CCs） whose motion type is two rotations and two translations（2R2T） is presented.Based on screw theory,the combination of different types of limbs which are used to construct parallel mechanisms and coupling chains is proposed.The basic types of the general parallel mechanisms and geometric conditions of the kinematic chains are given using constraint synthesis method.Moreover,the 2R2T motion pattern hybrid mechanisms which are derived by adding coupling chains between different serial kinematic chains（SKCs） of the corresponding parallel mechanisms are presented.According to the constraint analysis of the mechanisms,the movement relationship of the moving platform and the kinematic chains is derived by disassembling the coupling chains.At last,fourteen novel hybrid mechanisms with two or three serial kinematic chains are presented.The proposed novel hybrid mechanisms and construction method enrich the family of the spatial mechanisms and provide an instruction to design more complex hybrid mechanisms.
基金supported by the National Natural Science Foundation of China(No.21973005)。
文摘As the major and abundant type of glucosinolates(GL)in plants,sinigrin has potential functions in promoting health and insect defense.The final step in the biosynthesis of sinigrin core structure is highly representative in GL compounds,which corresponds to the process from 3-methylthiopropyl ds-GL to 3-methylthiopropyl GL catalyzed by sulfotransferase(SOT).However,due to the lack of the crystallographic structure of SOT complexed with the 3-methylthiopropyl GL,little is known about this sulfonation process.Fortunately,the crystal structure of SOT 18 from Arabidopsis thaliana(At SOT18)containing the substance(sinigrin)similar to 3-methylthiopropyl GL has been determined.To understand the enzymatic mechanism,we employed molecular dynamics(MD)simulation and quantum mechanics combined with molecular mechanics(QM/MM)methods to study the conversion from ds-sinigrin to sinigrin catalyzed by AtSOT18.The calculated results demonstrate that the reaction occurs through a concerted dissociative mechanism.Moreover,Lys93,Thr96,Thr97,Tyr130,His155,and two enzyme peptide chains(Pro92-Lys93 and Gln95-Thr96-Thr97)play a role in positioning the substrates and promoting the catalytic reaction by stabilizing the transition state geometry.Particularly,His155 acts as a catalytic base while Lys93 acts as a catalytic acid in the reaction process.The presently proposed concerted dissociative mechanism explains the role of At SOT18 in sinigrin biosynthesis,and could be instructive for the study of GL biosynthesis catalyzed by other SOTs.
基金supported by the National Natural Science Foundation of China (11532010)
文摘Structural fatigue of NiTi shape memory alloys is a key issue that should be solved in order to promote their engineering applications and utilize their unique shape memory effect and super-elasticity more sufficiently. In this paper, the latest progresses made in experimental and theoretical analyses for the structural fatigue features of NiTi shape memory alloys are reviewed. First, macroscopic experimental observations to the pure mechanical and thermo-mechanical fatigue features of the alloys are summarized; then the state-of-arts in the mechanism analysis of fatigue rupture are addressed; further, advances in the construction of fatigue failure models are provided; finally, summary and future topics are outlined.
基金financial support of the project from the National Natural Science Foundation of China (Nos. 51571114 and 51401106)the Natural Science Foundation of Jiangsu Province (No. BK20130935)
文摘A series of silver-doped graphite-like carbon coatings was prepared on the surface of aluminum alloy using the magnetron sputtering method. The spontaneous escape behavior and inhibition mechanism of silver from graphite-like carbon coating were studied. The results showed that when the sample prepared with a 0.01-A current on the silver target was placed in an atmospheric environment for 0.5 h, an apparent silver escape phenomenon could be observed. However, the silver escape phenomenon was not observed for samples prepared with a 0.05-A current on the silver target if the sample was retained in a 10^（-1） Pa vacuum environment, even after 48 h. Compared with the sample placed in the atmospheric environment immediately after an ion plating process, the silver escape time lagged for 6 h. Nanometer-thick pure carbon coating coverage could effectively suppress silver escape. When the coating thickness reached700 nm, permanent retention of silver could be achieved in the silver-doped graphite-like carbon coating.As the silver residue content in the graphite-like carbon coating increased from 2.27 at.% to 5.35 at.%, the interfacial contact resistance of the coating decreased from 51mΩcm^2 to 6 mΩcm^2.
基金supported by the National Key Basic Research Program (Grant No. 2012CB932203)the National Natural Science Foundation of China (Grant No. 51301147)+1 种基金the funding support from City University of Hong Kong (Grant Nos. 9610288 and 9680108)the funding support from the National Natural Science Foundation of China (Grant No. 51464234)
文摘Surface mechanical attrition treatment（SMAT） has been recently applied to bulk polycrystalline magnesium（Mg） alloys with gradient grain size distribution from the impact surface to inside matrix, hence effectively improving the alloys＇ mechanical performances. However, in-depth understanding of their mechanical property enhancement and grain size-dependent fracture mechanism remains unclear. Here,we demonstrated the use of in situ micro-tensile testing inside a high resolution scanning electron microscope（SEM） to characterize the microstructure evolution, in real time, of SMATed Mg alloy AZ31 samples with different grain sizes of ~10 μm（＇coarse-grain sample＇） and ~5 μm（＇fine-grain sample＇）, respectively, and compared the results with those of a raw Mg alloy AZ31. The quantitative tensile tests with in situ SEM imaging clearly showed that fracture of ‘fine-grain sample＇ was dominated by intergranular cracks,while both trans-granular and intergranular cracks led to the final failure of the ‘coarse-grain samples＇.It is expected that this in situ SEM characterization technique, coupled with quantitative tensile testing method, could be applicable for studying other grain-refined metals/alloys, allowing to optimize their mechanical performances by controlling the grain sizes and their gradient distribution.
基金Project(51021004)supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China
文摘Based on particle flow theory, the influences of the magnitude and direction of the intermediate principal stress on failure mechanism of hard rock with a pre-existing circular opening were studied by carrying out true triaxial tests on siltstone specimen. It is shown that peak strength of siltstone specimen increases firstly and subsequently decreases with the increase of the intermediate principal stress. And its turning point is related to the minimum principal stress and the direction of the intermediate principal stress. Failure characteristic(brittleness or ductility) of siltstone is determined by the minimum principal stress and the difference between the intermediate and minimum principal stress. The intermediate principal stress has a significant effect on the types and distributions of microcracks. The failure modes of the specimen are determined by the magnitude and direction of the intermediate principal stress, and related to weakening effect of the opening and inhibition effect of confining pressure in essence: when weakening effect of the opening is greater than inhibition effect of confining pressure, the failure surface is parallel to the x axis(such as σ2=σ3=0 MPa); conversely, the failure surface is parallel to the z axis(such as σ2=20 MPa, σ3=0 MPa).
文摘Rapidly solidified 2024 aluminium alloy powders were mechanically milled, then consolidated to bulk form. The microstructural changes of the powders in mechanical milling (MM) and consolidation process were characterized by X-ray diffraction analyses and transmission electron microscopy observations. The results showed that mechanical milling reduced the grain size to nanometer, dissolved the Al2Cu intermetallic compound into the aluminium matrix and produced an aluminium supersaturated solid solution. During consolidation process. the grain size increased to submicrometer, and the Al2Cu and Al2(Cu, Mg, Si, Fe, Mn) compounds precipitated owing to heating. Increasing consolidation temperature and time results in obvious grain growth and coarsening of second phase particles. The tensile yield strength of the consolidated alloy with submicrometer size grains increases with decreasing grain size, and it follows the famous HallPetch relation
