The purpose of this study is to develop a standard methodology for measuring the surface free energy (SFE),and its component parts of bamboo fiber materials.The current methods was reviewed to determine the surface te...The purpose of this study is to develop a standard methodology for measuring the surface free energy (SFE),and its component parts of bamboo fiber materials.The current methods was reviewed to determine the surface tension of natural fibers and the disadvantages of techniques used were discussed.Although numerous techniques have been employed to characterize surface tension of natural fibers,it seems that the credibility of results obtained may often be dubious.In this paper,critical surface tension estimates were obtained from computer aided machine vision based measurement.Data were then analyzed by the least squares method to estimate the components of SFE.SFE was estimated by least squares analysis and also by Schultz' method.By using the Fowkes method the polar and disperse fractions of the surface free energy of bamboo fiber materials can be obtained.Strictly speaking,this method is based on a combination of the knowledge of Fowkes theory. SFE is desirable when adhesion is required,and it avoids some of the limitations of existing studies which has been proposed.The calculation steps described in this research are only intended to explain the methods.The results show that the method that only determines SFE as a single parameter may be unable to differentiate adequately between bamboo fiber materials,but it is feasible and very efficient.In order to obtain the maximum performance from the computer aided machine vision based measurement instruments,this measurement should be recommended and kept available for reference.展开更多
Electrochemical techniques of the corrosion measurements of reinforcing steeI in concrete have been evaluated. These techniques include half-cell potential measurements, impressed voltage method, impressed current met...Electrochemical techniques of the corrosion measurements of reinforcing steeI in concrete have been evaluated. These techniques include half-cell potential measurements, impressed voltage method, impressed current method and potentiostatic polarization technique. The results of corrosion behaviour of the steel in both 5%NaCl and 5%MgSO4 show that each electrochemical technique provides some information about the condition of the steel bar or the corrosivity of the environment being evaluated, yet none provides a complete data regarding the corrosion resistance of reinforcing steel in aggressive media展开更多
Using the Differential Absorption Lidar (DIAL) technique, two types of approaches, namely, reflection from retroreflector / topographic target and backscatter from atmosphere, are available for studying remotely the a...Using the Differential Absorption Lidar (DIAL) technique, two types of approaches, namely, reflection from retroreflector / topographic target and backscatter from atmosphere, are available for studying remotely the atmospheric NO, concentration. The Argon ion lidar system at the Indian Institute of Tropical Meteorology (IITM), Pune, India has been used for the measurements by following both the path-averaged and range-resolved approaches. For the former, a topographic target (hill) is used for determining path-averaged surface concentration. In the latter, spectral properties of atmospheric attenuation is used for making range-resolved measurements in the surface layer. The results of the observations collected by following both approaches are presented. The average surface NO2 concentration was found to vary between 0.01 and 0.105 ppm and the range-resolved measurements exhibited higher values suggesting treatment of the lidar data for scattering and extinction effects due to atmospheric aerosols and air molecules, and atmospheric turbulence. Certain modifications that are suggested to the experimental set-up, data acquisition and analysis to improve the measurements are briefly described.展开更多
Recently, optical techniques have attracted great attention due to their excellent non-destructive, non-contact, high-resolution, and full-field characteristics. Applications can be found in diverse fields such as pre...Recently, optical techniques have attracted great attention due to their excellent non-destructive, non-contact, high-resolution, and full-field characteristics. Applications can be found in diverse fields such as precision mechanics and manufacturing, aerospace and automotive testing and inspection, materials science, and biomedical engineering. Advances in Optical Techniques for Me- chanical Measurements presents the latest research progresses in several widely used optical techniques with applications in preci- sion mechanical engineering.展开更多
By using dropped stress creep method a new testing technique for measurement of the fa-tigue-creep interaction resistance is developed. At varied adjusted mean stresses the creep testingwas performed repeatedly When a...By using dropped stress creep method a new testing technique for measurement of the fa-tigue-creep interaction resistance is developed. At varied adjusted mean stresses the creep testingwas performed repeatedly When an unlimited extensive incubation period with zero creep rate oc-curred. the stress cavsing zero creep rate is defined as fatigue-creep resistance. The developped test-ing technique was used to measure the fatigue-creep resistance in F anc C regions. The dynamic ef-fective stress could yield a better descrption of fatigue and creep interaction. The fatigue-creep rateequations with varied exponents inF of C region are established. The different deformation mecha-nisms in F or C regions are indicated展开更多
The^(6)Li+^(89)Y experiment was performed to explore the reaction mechanism induced by a weakly bound nucleus^(6)Li and its cluster configuration.The particle-γcoincidence method was used to identify the different re...The^(6)Li+^(89)Y experiment was performed to explore the reaction mechanism induced by a weakly bound nucleus^(6)Li and its cluster configuration.The particle-γcoincidence method was used to identify the different reaction channels.Theγ-rays coincident with^(3)He/^(3)H indicate that the^(3)H/^(3)He stripping reaction plays a significant role in the formation of Zr/Nb isotopes.The obtained results support the existence of a^(3)He-^(3)H cluster in^(6)Li.Direct and sequential transfer reactions are adequately discussed,and the FRESCO code is used to perform precise finite-range cyclic redundancy check calculations.In the microscopic calculation,direct cluster transfer is more predominant than sequential transfer in^(3)H transfer.However,the direct cluster transfer is of comparable magnitude to the sequential transfer in the^(3)He transfer.展开更多
A fitting process is used to measure the cavity loss and the quasi Fermi level separation for Fabry Pérot semiconductor lasers.From the amplified spontaneous emission (ASE) spectrum,the gain spectrum and sing...A fitting process is used to measure the cavity loss and the quasi Fermi level separation for Fabry Pérot semiconductor lasers.From the amplified spontaneous emission (ASE) spectrum,the gain spectrum and single pass ASE obtained by the Cassidy method are applied in the fitting process.For a 1550nm quantum well InGaAsP ridge waveguide laser,the cavity loss of about ～24cm -1 is obtained.展开更多
The LaBr3(Ce)detector has attracted much attention in recent years because of its superior characteristics compared with other scintillating materials in terms of resolution and efficiency.However,it has a relatively ...The LaBr3(Ce)detector has attracted much attention in recent years because of its superior characteristics compared with other scintillating materials in terms of resolution and efficiency.However,it has a relatively high intrinsic background radiation because of the naturally occurring radioisotopes in lanthanum,actinium,and their daughter nuclei.This limits its applications in low-counting rate experiments.In this study,we identified the radioactive isotopes in theφ3"x 3"Saint-Gobain B380 detector by a coincidence measurement using a Clover detector in a low-background shielding system.Moreover,we carried out a Geant4 simulation of the experimental spectra to evaluate the activities of the main internal radiation components.The total activity of the background radiation of B380 is determined to be 1.523(34)Bq/cm^3.The main sources include 138La at 1.428(34)Bq/cm^3,207Tl at 0.0135(13)Bq/cm^3,211Bi at 0.0136(15)Bq/cm^3,215Po at 0.0135(3)Bq/cm^3,219Rn at 0.0125(12)Bq/cm^3,223Fr at 0.0019(11)Bq/cm^3,223Ra at 0.0127(10)Bq/cm^3,227Th at 0.0158(22)Bq/cm^3,and 227Ac at 0.0135(13)Bq/cm^3.Of these,the activities of 207Tl,211Po,215Po,223Fr,and 227Ac are deduced for the first time from the secular equilibrium established in the decay chain of 227Ac.展开更多
Quasi-longitudinal waves are one type of structural waves, which are important at high frequencies. This paper studies the estimate theory and measurement technique of quasi-longitudinal waves, analyzes the bias error...Quasi-longitudinal waves are one type of structural waves, which are important at high frequencies. This paper studies the estimate theory and measurement technique of quasi-longitudinal waves, analyzes the bias error due to the effect of bending waves. In a two-dimensional quasi-longitudinal wave held, the intensity vector is the sum of the effective intensity vector and the intensity variation vector. Its axial component is proportional to two imaginary parts of cross spectral densities and in the measurement, it is measured by a pair of two-transducer arrays. In a one-dimensional quasi-longitudinal wave field, the intensity variation is zero, the intensity is proportional to only one imaginary part of a cross spectral density and it can be measured using a two-transducer array. If bending and quasi-longitudinal waves coexist and the contribution from bending waves cannot be eliminated or reduced to a certain extent, the measured quasi-longitudinal wave intensity will contain a large error. The results measured on the three-beam structure show that quasi-longitudinal wave intensity can be accurately measured using the intensity technique when bending waves are negligible in comparison with quasi-longitudinal waves.展开更多
The experimental investigation of unsteady complex flow fields in wind tunnels requires advanced measurement techniques. The most important of such image based measurement techniques are those for the measurement of p...The experimental investigation of unsteady complex flow fields in wind tunnels requires advanced measurement techniques. The most important of such image based measurement techniques are those for the measurement of planar flow velocity fields, planar pressure distribution, model location and deformation, model temperature and quantitative high speed flow visualization. The applications as carried out by DLR range from low speed flows to transonic flows, from high lift configurations to propellers and rotors, from wake vortex investigations in catapult facilities and water towing tanks to investigations of vortex break down phenomena on delta wings. The capability to use image based measurement techniques in transonic flows requires dedicated technical developments and experienced scientists due to the special environment of a transonic wind tunnel. In this paper an overview of the state-of-the art of the application of image based measurement techniques in transonic flows as performed by DLR＇s Institute of Aerodynamics and Flow Technology will be given.展开更多
Atmospheric nanoparticles are crucial components contributing to fine particulate matter(PM_(2.5)),and therefore have significant effects on visibility,climate,and human health.Due to the unique role of atmospheric na...Atmospheric nanoparticles are crucial components contributing to fine particulate matter(PM_(2.5)),and therefore have significant effects on visibility,climate,and human health.Due to the unique role of atmospheric nanoparticles during the evolution process from gas-phase molecules to larger particles,a number of sophisticated experimental techniques have been developed and employed for online monitoring and characterization of the physical and chemical properties of atmospheric nanoparticles,helping us to better understand the formation and growth of new particles.In this paper,we firstly review these state-of-the-art techniques for investigating the formation and growth of atmospheric nanoparticles(e.g.,the gas-phase precursor species,molecular clusters,physicochemical properties,and chemical composition).Secondly,we present findings from recent field studies on the formation and growth of atmospheric nanoparticles,utilizing several advanced techniques.Further-more,perspectives are proposed for technique development and improvements in measuring atmospheric nanoparticles.展开更多
On-line chemical characterization of atmospheric particulate matter(PM)with soft ionization technique and ultrahigh-resolution Mass Spectrometry(UHRMS)provides molecular information of organic constituents in real tim...On-line chemical characterization of atmospheric particulate matter(PM)with soft ionization technique and ultrahigh-resolution Mass Spectrometry(UHRMS)provides molecular information of organic constituents in real time.Here we describe the development and application of an automatic measurement system that incorporates PM_(2.5)sampling,thermal desorption,atmospheric pressure photoionization,and UHRMS analysis.Molecular formulas of detected organic compounds were deducted from the accurate(±10 ppm)molecular weights obtained at a mass resolution of 100,000,allowing the identification of small organic compounds in PM_(2.5).Detection efficiencies of 28 standard compounds were determined and we found a high sensitivity and selectivity towards organic amines with limits of detection below 10 pg.As a proof of principle,PM_(2.5)samples collected off-line in winter in the urban area of Beijing were analyzed using the Ionization Module and HRMS of the system.The automatic system was then applied to conduct on-line measurements during the summer time at a time resolution of 2 hr.The detected organic compounds comprised mainly CHON and CHN compounds below 350 m/z.Pronounced seasonal variations in elemental composition were observed with shorter carbon backbones and higher O/C ratios in summer than that in winter.This result is consistent with stronger photochemical reactions and thus a higher oxidation state of organics in summer.Diurnal variation in signal intensity of each formula provides crucial information to reveal its source and formation pathway.In summary,the automatic measurement system serves as an important tool for the on-line characterization and identification of organic species in PM_(2.5).展开更多
Cloudy bands are typical stratigraphic structure in deep ice core. Detailed recording of cloudy bands is important for dating of ice core since pair of series cloudy band and clear layer is corresponds to annual layer...Cloudy bands are typical stratigraphic structure in deep ice core. Detailed recording of cloudy bands is important for dating of ice core since pair of series cloudy band and clear layer is corresponds to annual layer and it sometimes corresponds to volcanic ash layer. We developed two type scanners, transmitted light method and laser tomograph method for the stratigraphic study. Measurements were carried out for NGRIP deep ice core, which containing many cloudy bands, using the two type scanners and digital camera. We discussed about the possibility of identification of cloudy bands by each method and about advantage and disadvantage of measurements and their results.展开更多
Objective: to explore the effect of simple bladder volume-pressure measurement technology and its effect on the quality of life.Methods: choose computer random method from June 2020 to June 2022, 68 cases of hospital ...Objective: to explore the effect of simple bladder volume-pressure measurement technology and its effect on the quality of life.Methods: choose computer random method from June 2020 to June 2022, 68 cases of hospital stroke neurogenic bladder patients are divided into two groups, a control group, a total of 34 patients, the implementation of intermittent catheterization, the other is observation group, there are 34 cases, on the basis of control group treatment, increase the simple bladder capacity-pressure measurement technique.Compare the various clinical indicators.Results: the data of the observed group were better than the control group showed in Table 1-Table 4, with P < 0.05. Conclusion: the application of simple bladder volume-pressure measurement technology in neurogenic bladder combined with intermittent catheterization can help restore autonomous urination, reduce the incidence of symptomatic urinary tract infection, help increase bladder capacity, reduce residual urine volume, and higher quality of life for patients, which is worthy of practice in various medical institutions.展开更多
In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux densi...In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.展开更多
With the development of science and technology in China, the measuring technique in water resources and hydropower engineering is also developing constantly. Measuring technique in water resources and hydropower engin...With the development of science and technology in China, the measuring technique in water resources and hydropower engineering is also developing constantly. Measuring technique in water resources and hydropower engineering is an important link in water conservancy and hydropower projects, which can improve the survey efficiency of water conservancy and hydropower projects and promote the rapid development of China's water conservancy and hydropower projects. This paper will analyze the current situation of measuring technique development of water conservancy and hydropower projects and explore how to improve the measuring efficiency of water conservancy and hydropower projects.展开更多
A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted....A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted. The tests show that the ignitor and the main charge of the microthruster match well, the dynamic and static capability of the test and measurement meets the test requirement and the result is creditable. The measured technical characteristics of the microthruster are that the ignition delay time is shorter than 0 3?ms, the total impulse is over 3?N·s, the operational time is shorter than 16?ms and the mass ratio of the thruster is 0 216.展开更多
Beginning from the origination of the bone-length cun measurement, and proceeding from clinical application, the article differentiated and analyzed 4 measuring methods relate with cun, namely, bone-length cun measure...Beginning from the origination of the bone-length cun measurement, and proceeding from clinical application, the article differentiated and analyzed 4 measuring methods relate with cun, namely, bone-length cun measurement and finger cun measurement regarding to acupoint locating, cun measurement of filiform needle concerning the size of the body of the needle and cun measurement of acupuncture technique referring to the depth of insertion. It explained different senses of cun in the above 4 measurements. The original meaning and the respective implication for each situation should be clarified. Flexible and proper application is required so as to enhance the therapeutic effect of the treatment and avoid possible accidents.展开更多
Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster,higher and further.The great progress has been...Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster,higher and further.The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development.There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes.These wind tunnels are named as air-directly-heated hypersonic wind tunnel,light-gas-heated shock tunnel,free-piston-driven shock tunnel and detonation-driven shock tunnel,respectively.The critical technologies for developing the wind tunnels are introduced in this paper,and their merits and weakness are discussed based on wind tunnel performance evaluation.Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments.Three kinds of the measurement techniques considered to be of primary importance are introduced here,including the heat flux sensor,the aerodynamic balance,and optical diagnosis techniques.The techniques are developed usually for conventional wind tunnels,but further improved for hypersonic and high-enthalpy tunnels.The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future.Therefore,several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.展开更多
Based on Raman-shifted wavelengths of D2 and CHr pumped by third harmonic of Nd:YAG laser, a differential absorption lidar was presented in this paper and had been constructed for probing environmental NO2 concentrati...Based on Raman-shifted wavelengths of D2 and CHr pumped by third harmonic of Nd:YAG laser, a differential absorption lidar was presented in this paper and had been constructed for probing environmental NO2 concentration. NO2 experimental measurements were carried out at Anhui Institute of Optics and Fine Mechanics in Hefei. Some NO2 measurement results were given and discussed.展开更多
基金the National Natural Science Foundation of China(No.31101085)the Scientific Research and Development Foundation for Start-up Projects of Zhejiang Agriculture and Forestry University (No.2034020044)
文摘The purpose of this study is to develop a standard methodology for measuring the surface free energy (SFE),and its component parts of bamboo fiber materials.The current methods was reviewed to determine the surface tension of natural fibers and the disadvantages of techniques used were discussed.Although numerous techniques have been employed to characterize surface tension of natural fibers,it seems that the credibility of results obtained may often be dubious.In this paper,critical surface tension estimates were obtained from computer aided machine vision based measurement.Data were then analyzed by the least squares method to estimate the components of SFE.SFE was estimated by least squares analysis and also by Schultz' method.By using the Fowkes method the polar and disperse fractions of the surface free energy of bamboo fiber materials can be obtained.Strictly speaking,this method is based on a combination of the knowledge of Fowkes theory. SFE is desirable when adhesion is required,and it avoids some of the limitations of existing studies which has been proposed.The calculation steps described in this research are only intended to explain the methods.The results show that the method that only determines SFE as a single parameter may be unable to differentiate adequately between bamboo fiber materials,but it is feasible and very efficient.In order to obtain the maximum performance from the computer aided machine vision based measurement instruments,this measurement should be recommended and kept available for reference.
文摘Electrochemical techniques of the corrosion measurements of reinforcing steeI in concrete have been evaluated. These techniques include half-cell potential measurements, impressed voltage method, impressed current method and potentiostatic polarization technique. The results of corrosion behaviour of the steel in both 5%NaCl and 5%MgSO4 show that each electrochemical technique provides some information about the condition of the steel bar or the corrosivity of the environment being evaluated, yet none provides a complete data regarding the corrosion resistance of reinforcing steel in aggressive media
文摘Using the Differential Absorption Lidar (DIAL) technique, two types of approaches, namely, reflection from retroreflector / topographic target and backscatter from atmosphere, are available for studying remotely the atmospheric NO, concentration. The Argon ion lidar system at the Indian Institute of Tropical Meteorology (IITM), Pune, India has been used for the measurements by following both the path-averaged and range-resolved approaches. For the former, a topographic target (hill) is used for determining path-averaged surface concentration. In the latter, spectral properties of atmospheric attenuation is used for making range-resolved measurements in the surface layer. The results of the observations collected by following both approaches are presented. The average surface NO2 concentration was found to vary between 0.01 and 0.105 ppm and the range-resolved measurements exhibited higher values suggesting treatment of the lidar data for scattering and extinction effects due to atmospheric aerosols and air molecules, and atmospheric turbulence. Certain modifications that are suggested to the experimental set-up, data acquisition and analysis to improve the measurements are briefly described.
文摘Recently, optical techniques have attracted great attention due to their excellent non-destructive, non-contact, high-resolution, and full-field characteristics. Applications can be found in diverse fields such as precision mechanics and manufacturing, aerospace and automotive testing and inspection, materials science, and biomedical engineering. Advances in Optical Techniques for Me- chanical Measurements presents the latest research progresses in several widely used optical techniques with applications in preci- sion mechanical engineering.
文摘By using dropped stress creep method a new testing technique for measurement of the fa-tigue-creep interaction resistance is developed. At varied adjusted mean stresses the creep testingwas performed repeatedly When an unlimited extensive incubation period with zero creep rate oc-curred. the stress cavsing zero creep rate is defined as fatigue-creep resistance. The developped test-ing technique was used to measure the fatigue-creep resistance in F anc C regions. The dynamic ef-fective stress could yield a better descrption of fatigue and creep interaction. The fatigue-creep rateequations with varied exponents inF of C region are established. The different deformation mecha-nisms in F or C regions are indicated
基金supported by the National Natural Science Foundation of China under Grant Nos.U2167204,11975040,111 Center(B20065)Brazilian authors were supported in part by local funding agencies CNPq+10 种基金FAPERJCAPESand INCT-FNA(Instituto Nacional de Ciência e Tecnologia,Física Nuclear e Aplicacoes)Research Project No.464898/2014-5Marco Siciliano's work was partially supported by the US Department of EnergyOffice of Scienceand Office of Nuclear Physics(DE-AC02-06CH11357)supported by Nuclear Energy Development and Research Project No.HNKF202224(28)Ling Chuang Research Project of the China National Nuclear Corporation No.CNNCLCKY-2023 and No.20221024000072F6-0002-7Guangdong Key Research and Development Program No.2020B040420005Guangdong Basic and Applied Basic Research Foundation No.2021B1515120027。
文摘The^(6)Li+^(89)Y experiment was performed to explore the reaction mechanism induced by a weakly bound nucleus^(6)Li and its cluster configuration.The particle-γcoincidence method was used to identify the different reaction channels.Theγ-rays coincident with^(3)He/^(3)H indicate that the^(3)H/^(3)He stripping reaction plays a significant role in the formation of Zr/Nb isotopes.The obtained results support the existence of a^(3)He-^(3)H cluster in^(6)Li.Direct and sequential transfer reactions are adequately discussed,and the FRESCO code is used to perform precise finite-range cyclic redundancy check calculations.In the microscopic calculation,direct cluster transfer is more predominant than sequential transfer in^(3)H transfer.However,the direct cluster transfer is of comparable magnitude to the sequential transfer in the^(3)He transfer.
文摘A fitting process is used to measure the cavity loss and the quasi Fermi level separation for Fabry Pérot semiconductor lasers.From the amplified spontaneous emission (ASE) spectrum,the gain spectrum and single pass ASE obtained by the Cassidy method are applied in the fitting process.For a 1550nm quantum well InGaAsP ridge waveguide laser,the cavity loss of about ～24cm -1 is obtained.
基金This work was supported by the National Key R&D program of China(No.2016YFA0400504)by the National Natural Science Foundation of China(Nos.U1832211,U1867210,11922501,11961141004,11575018,11790322,and U1932209).
文摘The LaBr3(Ce)detector has attracted much attention in recent years because of its superior characteristics compared with other scintillating materials in terms of resolution and efficiency.However,it has a relatively high intrinsic background radiation because of the naturally occurring radioisotopes in lanthanum,actinium,and their daughter nuclei.This limits its applications in low-counting rate experiments.In this study,we identified the radioactive isotopes in theφ3"x 3"Saint-Gobain B380 detector by a coincidence measurement using a Clover detector in a low-background shielding system.Moreover,we carried out a Geant4 simulation of the experimental spectra to evaluate the activities of the main internal radiation components.The total activity of the background radiation of B380 is determined to be 1.523(34)Bq/cm^3.The main sources include 138La at 1.428(34)Bq/cm^3,207Tl at 0.0135(13)Bq/cm^3,211Bi at 0.0136(15)Bq/cm^3,215Po at 0.0135(3)Bq/cm^3,219Rn at 0.0125(12)Bq/cm^3,223Fr at 0.0019(11)Bq/cm^3,223Ra at 0.0127(10)Bq/cm^3,227Th at 0.0158(22)Bq/cm^3,and 227Ac at 0.0135(13)Bq/cm^3.Of these,the activities of 207Tl,211Po,215Po,223Fr,and 227Ac are deduced for the first time from the secular equilibrium established in the decay chain of 227Ac.
文摘Quasi-longitudinal waves are one type of structural waves, which are important at high frequencies. This paper studies the estimate theory and measurement technique of quasi-longitudinal waves, analyzes the bias error due to the effect of bending waves. In a two-dimensional quasi-longitudinal wave held, the intensity vector is the sum of the effective intensity vector and the intensity variation vector. Its axial component is proportional to two imaginary parts of cross spectral densities and in the measurement, it is measured by a pair of two-transducer arrays. In a one-dimensional quasi-longitudinal wave field, the intensity variation is zero, the intensity is proportional to only one imaginary part of a cross spectral density and it can be measured using a two-transducer array. If bending and quasi-longitudinal waves coexist and the contribution from bending waves cannot be eliminated or reduced to a certain extent, the measured quasi-longitudinal wave intensity will contain a large error. The results measured on the three-beam structure show that quasi-longitudinal wave intensity can be accurately measured using the intensity technique when bending waves are negligible in comparison with quasi-longitudinal waves.
文摘The experimental investigation of unsteady complex flow fields in wind tunnels requires advanced measurement techniques. The most important of such image based measurement techniques are those for the measurement of planar flow velocity fields, planar pressure distribution, model location and deformation, model temperature and quantitative high speed flow visualization. The applications as carried out by DLR range from low speed flows to transonic flows, from high lift configurations to propellers and rotors, from wake vortex investigations in catapult facilities and water towing tanks to investigations of vortex break down phenomena on delta wings. The capability to use image based measurement techniques in transonic flows requires dedicated technical developments and experienced scientists due to the special environment of a transonic wind tunnel. In this paper an overview of the state-of-the art of the application of image based measurement techniques in transonic flows as performed by DLR＇s Institute of Aerodynamics and Flow Technology will be given.
基金supported by the National Key Research and Development Program of China(No.2017YFC0209500)。
文摘Atmospheric nanoparticles are crucial components contributing to fine particulate matter(PM_(2.5)),and therefore have significant effects on visibility,climate,and human health.Due to the unique role of atmospheric nanoparticles during the evolution process from gas-phase molecules to larger particles,a number of sophisticated experimental techniques have been developed and employed for online monitoring and characterization of the physical and chemical properties of atmospheric nanoparticles,helping us to better understand the formation and growth of new particles.In this paper,we firstly review these state-of-the-art techniques for investigating the formation and growth of atmospheric nanoparticles(e.g.,the gas-phase precursor species,molecular clusters,physicochemical properties,and chemical composition).Secondly,we present findings from recent field studies on the formation and growth of atmospheric nanoparticles,utilizing several advanced techniques.Further-more,perspectives are proposed for technique development and improvements in measuring atmospheric nanoparticles.
基金supported by the National Natural Science Foundation of China(No.41805105)。
文摘On-line chemical characterization of atmospheric particulate matter(PM)with soft ionization technique and ultrahigh-resolution Mass Spectrometry(UHRMS)provides molecular information of organic constituents in real time.Here we describe the development and application of an automatic measurement system that incorporates PM_(2.5)sampling,thermal desorption,atmospheric pressure photoionization,and UHRMS analysis.Molecular formulas of detected organic compounds were deducted from the accurate(±10 ppm)molecular weights obtained at a mass resolution of 100,000,allowing the identification of small organic compounds in PM_(2.5).Detection efficiencies of 28 standard compounds were determined and we found a high sensitivity and selectivity towards organic amines with limits of detection below 10 pg.As a proof of principle,PM_(2.5)samples collected off-line in winter in the urban area of Beijing were analyzed using the Ionization Module and HRMS of the system.The automatic system was then applied to conduct on-line measurements during the summer time at a time resolution of 2 hr.The detected organic compounds comprised mainly CHON and CHN compounds below 350 m/z.Pronounced seasonal variations in elemental composition were observed with shorter carbon backbones and higher O/C ratios in summer than that in winter.This result is consistent with stronger photochemical reactions and thus a higher oxidation state of organics in summer.Diurnal variation in signal intensity of each formula provides crucial information to reveal its source and formation pathway.In summary,the automatic measurement system serves as an important tool for the on-line characterization and identification of organic species in PM_(2.5).
文摘Cloudy bands are typical stratigraphic structure in deep ice core. Detailed recording of cloudy bands is important for dating of ice core since pair of series cloudy band and clear layer is corresponds to annual layer and it sometimes corresponds to volcanic ash layer. We developed two type scanners, transmitted light method and laser tomograph method for the stratigraphic study. Measurements were carried out for NGRIP deep ice core, which containing many cloudy bands, using the two type scanners and digital camera. We discussed about the possibility of identification of cloudy bands by each method and about advantage and disadvantage of measurements and their results.
文摘Objective: to explore the effect of simple bladder volume-pressure measurement technology and its effect on the quality of life.Methods: choose computer random method from June 2020 to June 2022, 68 cases of hospital stroke neurogenic bladder patients are divided into two groups, a control group, a total of 34 patients, the implementation of intermittent catheterization, the other is observation group, there are 34 cases, on the basis of control group treatment, increase the simple bladder capacity-pressure measurement technique.Compare the various clinical indicators.Results: the data of the observed group were better than the control group showed in Table 1-Table 4, with P < 0.05. Conclusion: the application of simple bladder volume-pressure measurement technology in neurogenic bladder combined with intermittent catheterization can help restore autonomous urination, reduce the incidence of symptomatic urinary tract infection, help increase bladder capacity, reduce residual urine volume, and higher quality of life for patients, which is worthy of practice in various medical institutions.
文摘In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.
文摘With the development of science and technology in China, the measuring technique in water resources and hydropower engineering is also developing constantly. Measuring technique in water resources and hydropower engineering is an important link in water conservancy and hydropower projects, which can improve the survey efficiency of water conservancy and hydropower projects and promote the rapid development of China's water conservancy and hydropower projects. This paper will analyze the current situation of measuring technique development of water conservancy and hydropower projects and explore how to improve the measuring efficiency of water conservancy and hydropower projects.
文摘A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted. The tests show that the ignitor and the main charge of the microthruster match well, the dynamic and static capability of the test and measurement meets the test requirement and the result is creditable. The measured technical characteristics of the microthruster are that the ignition delay time is shorter than 0 3?ms, the total impulse is over 3?N·s, the operational time is shorter than 16?ms and the mass ratio of the thruster is 0 216.
文摘Beginning from the origination of the bone-length cun measurement, and proceeding from clinical application, the article differentiated and analyzed 4 measuring methods relate with cun, namely, bone-length cun measurement and finger cun measurement regarding to acupoint locating, cun measurement of filiform needle concerning the size of the body of the needle and cun measurement of acupuncture technique referring to the depth of insertion. It explained different senses of cun in the above 4 measurements. The original meaning and the respective implication for each situation should be clarified. Flexible and proper application is required so as to enhance the therapeutic effect of the treatment and avoid possible accidents.
基金the support of the National Natural Science Foundation of China(Nos.11532014,11727901,11672308 and 11672357)the National Key Research and Development Program of China(No.2019YFA0405204)。
文摘Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster,higher and further.The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development.There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes.These wind tunnels are named as air-directly-heated hypersonic wind tunnel,light-gas-heated shock tunnel,free-piston-driven shock tunnel and detonation-driven shock tunnel,respectively.The critical technologies for developing the wind tunnels are introduced in this paper,and their merits and weakness are discussed based on wind tunnel performance evaluation.Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments.Three kinds of the measurement techniques considered to be of primary importance are introduced here,including the heat flux sensor,the aerodynamic balance,and optical diagnosis techniques.The techniques are developed usually for conventional wind tunnels,but further improved for hypersonic and high-enthalpy tunnels.The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future.Therefore,several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.
基金This work was supported by the National 863 High Technology Research and Development Projects,S,
文摘Based on Raman-shifted wavelengths of D2 and CHr pumped by third harmonic of Nd:YAG laser, a differential absorption lidar was presented in this paper and had been constructed for probing environmental NO2 concentration. NO2 experimental measurements were carried out at Anhui Institute of Optics and Fine Mechanics in Hefei. Some NO2 measurement results were given and discussed.
