期刊文献+
共找到945篇文章
< 1 2 48 >
每页显示 20 50 100
Novel two⁃stage preflow algorithm for solving the maximum flow problem in a network with circles
1
作者 DANG Yaoguo HUANG Jinxin +1 位作者 DING Xiaoyu WANG Junjie 《Journal of Southeast University(English Edition)》 2025年第1期91-100,共10页
The presence of circles in the network maximum flow problem increases the complexity of the preflow algorithm.This study proposes a novel two-stage preflow algorithm to address this issue.First,this study proves that ... The presence of circles in the network maximum flow problem increases the complexity of the preflow algorithm.This study proposes a novel two-stage preflow algorithm to address this issue.First,this study proves that at least one zero-flow arc must be present when the flow of the network reaches its maximum value.This result indicates that the maximum flow of the network will remain constant if a zero-flow arc within a circle is removed;therefore,the maximum flow of each network without circles can be calculated.The first stage involves identifying the zero-flow arc in the circle when the network flow reaches its maximum.The second stage aims to remove the zero-flow arc identified and modified in the first stage,thereby producing a new network without circles.The maximum flow of the original looped network can be obtained by solving the maximum flow of the newly generated acyclic network.Finally,an example is provided to demonstrate the validity and feasibility of this algorithm.This algorithm not only improves computational efficiency but also provides new perspectives and tools for solving similar network optimization problems. 展开更多
关键词 network with circles maximum flow zeroflow arc two-stage preflow algorithm
在线阅读 下载PDF
Modified EDMONDS-KARP Algorithm to Solve Maximum Flow Problems
2
作者 Kalyan Kumar Mallick Aminur Rahman Khan +2 位作者 Mollah Mesbahuddin Ahmed Md. Shamsul Arefin Md. Sharif Uddin 《Open Journal of Applied Sciences》 2016年第2期131-140,共10页
Maximum Flow Problem (MFP) discusses the maximum amount of flow that can be sent from the source to sink. Edmonds-Karp algorithm is the modified version of Ford-Fulkerson algorithm to solve the MFP. This paper present... Maximum Flow Problem (MFP) discusses the maximum amount of flow that can be sent from the source to sink. Edmonds-Karp algorithm is the modified version of Ford-Fulkerson algorithm to solve the MFP. This paper presents some modifications of Edmonds-Karp algorithm for solving MFP. Solution of MFP has also been illustrated by using the proposed algorithm to justify the usefulness of proposed method. 展开更多
关键词 maximum flow maximum flow Problem Breadth First Search Augmenting Path Residual Network
在线阅读 下载PDF
Origin of Erosion and Hydraulic Problems of the San Roque Underground Arched Culvert Channel and Its Relationship with the Maximum Flow Rate and the Maximum Permissible Velocity
3
作者 Martín Mundo-Molina Daniel Hernández-Cruz 《Journal of Water Resource and Protection》 2020年第12期1123-1139,共17页
This work presents the hydrologic estimations of the hydraulic underground arched culvert channel (UACC) in Sabinal Basin, Chiapas, México and the hydrological problems associated with it, such as the erosion phe... This work presents the hydrologic estimations of the hydraulic underground arched culvert channel (UACC) in Sabinal Basin, Chiapas, México and the hydrological problems associated with it, such as the erosion phenomenon and abrasion cavity formation in it. On the other hand, the maximum flows that the UACC could transport were analyzed, concluding that it no longer has the hydraulic capacity to transport the flow rate associated to return periods equal to or greater than five years and that maximum permissible velocity UACC’s bottom is 3 m/s. 展开更多
关键词 Collapse Underground Arched Culvert Channel maximum flow Rate maximum Permissible Water Velocity Open Channel Bottom Erosion
在线阅读 下载PDF
Algorithms to Calculate the Most Reliable Maximum Flow in Content Delivery Network
4
作者 Baili Zhang Keke Ling +2 位作者 Pei Zhang Zhao Zhang Mingjun Zhong 《Computer Systems Science & Engineering》 SCIE EI 2022年第5期699-715,共17页
Calculating the most reliable maximum flow(MRMF)from the edge cache node to the requesting node can provide an important reference for selecting the best edge cache node in a content delivery network(CDN).However,SDBA... Calculating the most reliable maximum flow(MRMF)from the edge cache node to the requesting node can provide an important reference for selecting the best edge cache node in a content delivery network(CDN).However,SDBA,as the current state-of-the-art MRMF algorithm,is too complex to meet real-time computing needs.This paper proposes a set of MRMF algorithms:NWCD(Negative Weight Community Deletion),SCPDAT(Single-Cycle Preference Deletion Approximation algorithm with Time constraint)and SCPDAP(Single-Cycle Preference Deletion Approximation algorithm with Probability constraint).NWCD draws on the“flow-shifting”algorithm of minimum cost and maximum flow,and further defines the concept of negative weight community.This algorithm continuously deletes the negative weight communities,which can increase reliability while keeping the flow constant in the residual graph.It is proven that when all negative weight communities are deleted,the corresponding maximum flow is the MRMF.SCPDAT tries to approach the optimal solution to the greatest extent possible within the limited time,while SCPDAP tries to reach the probability threshold in the shortest amount of time.Both of these adopt the strategy of first deleting single-cycle communities(which contribute more to the reliability with lower time cost).Experiments show that,compared with SDBA,NWCD combined with the probabilistic pruning achieves an order of magnitude improvement in time cost,while SCPDAT and SCPDAP demonstrate better time performance and increased applicability. 展开更多
关键词 Content delivery network uncertain graph maximum flow flow reliability
在线阅读 下载PDF
A maximum flow algorithm for buffer-limited delay tolerant networks 被引量:1
5
作者 Tao Zhang Songfeng Deng +2 位作者 Hongyan Li Ronghui Hou Haichao Zhang 《Journal of Communications and Information Networks》 2017年第3期52-60,共9页
Deep space networks,satellite networks,ad hoc networks,and the Internet can be modeled as DTNs(Delay Tolerant Networks).As a fundamental problem,the maximum flow problem is of vital importance for routing and service ... Deep space networks,satellite networks,ad hoc networks,and the Internet can be modeled as DTNs(Delay Tolerant Networks).As a fundamental problem,the maximum flow problem is of vital importance for routing and service scheduling in networks.However,there exists no permanent end-to-end path since the topology and the characteristics of links are time-variant,resulting in a crucial maximum flow problem in DTNs.In this paper,we focus on the single-source-single-sink maximum flow problem of buffer-limited DTNs,followed by a valid algorithm to solve it.First,the BTAG(Buffer-limited Time Aggregated Graph)is constructed for modeling the buffer-limited DTN.Then,on the basis of BTAG,the two-way cache transfer series and the relevant transfer rules are designed,and thus a BTAG-based maximum flow algorithm is proposed to solve the maximum flow problem in buffer-limited DTNs.Finally,a numerical example is given to demonstrate the effectiveness of the proposed algorithm. 展开更多
关键词 spatial information networks delay tolerant networks time-varying graph buffer-limited time aggregated graph maximum flow
原文传递
Inverse Maximum Flow Problem Under the Combination of the Weighted l_(2)Norm and the Weighted Hamming Distance
6
作者 Long-Cheng Liu Han Gao Chao Li 《Journal of the Operations Research Society of China》 EI CSCD 2021年第2期465-474,共10页
The idea of the inverse optimization problem is to adjust the values of the parameters so that the observed feasible solutions are indeed optimal.The modification cost is measured by different norms,such asl1,l2,l∞no... The idea of the inverse optimization problem is to adjust the values of the parameters so that the observed feasible solutions are indeed optimal.The modification cost is measured by different norms,such asl1,l2,l∞norms and the Hamming distance,and the goal is to adjust the parameters as little as possible.In this paper,we consider the inverse maximum flow problem under the combination of the weighted l2 norm and the weighted Hamming distance,i.e.,the modification cost is fixed in a given interval and depends on the modification out of the given interval.We present a combinatorial algorithm which can be finished in O(nm)to solve it due to the minimum cut of the residual network. 展开更多
关键词 maximum flow Minimum cut Inverse problem Residual network Strongly polynomial algorithm
原文传递
Experimental study on influence of boundary on location of maximum velocity in open channel flows 被引量:5
7
作者 Jing YAN Hong-wu TANG +2 位作者 Yang XIAO Kai-jie LI Zhi-Jun TIAN 《Water Science and Engineering》 EI CAS 2011年第2期185-191,共7页
The velocity dip phenomenon may occur in a part of or in the whole flow field of open channel flows due to the secondary flow effect. Based on rectangular flume experiments and the laser Doppler velocimetry, the influ... The velocity dip phenomenon may occur in a part of or in the whole flow field of open channel flows due to the secondary flow effect. Based on rectangular flume experiments and the laser Doppler velocimetry, the influence of the distance to the sidewall and the aspect ratio on the velocity dip is investigated. Through application of statistical methods to the experimental results, it is proposed that the flow field may be divided into two regions, the relatively strong sidewall region and the relatively weak sidewall region. In the former region, the distance to the sidewall greatly affects the location of maximum velocity, and, in the latter region, both the distance to the sidewall and the aspect ratio influence the location of the maximum velocity. 展开更多
关键词 velocity dip open channel flow location of maximum velocity sidewall effect aspect ratio
在线阅读 下载PDF
The Clinical Role of Changes of Maximum Expiratory Flow at 25%and 50%of Vital Capacity before and after Bronchodilator Reversibility Test in Diagnosing Asthma
8
作者 Xu-xuc GUO Xiao-fan LIU +7 位作者 Ai-ling WANG Qian-hui CHEN Shuo CHEN Ni-shan DENG Rui-yun LI Xu-hong DING Su ping HU Han-xiang NIE 《Current Medical Science》 SCIE CAS 2020年第4期677-682,共6页
Summary:Changes of maximum expiratory flow at 25%and 50%of vital capacity(MEF2s and MEFso,respectively),and predominant parameters indicating small airways function in asthmatics before and after bronchodilator(BD)rev... Summary:Changes of maximum expiratory flow at 25%and 50%of vital capacity(MEF2s and MEFso,respectively),and predominant parameters indicating small airways function in asthmatics before and after bronchodilator(BD)reversibility test have been less interpreted.Our study aimed to investigate the clinical role of changes of MEF2s and MEFso before and after BD reversibility test in diagnosing asthma.Forced expiratory volume in the first second(FEV),MEF2s,and MEFso were measured before and after BD reversibility test in 207 asthmatic patients using standard process.Forty healthy individuals were enrolled as controls.Receiver operating characteristic(ROC)curve was used to assess the diagnostic accuracy of reversibility of MEF2s and MEFgo before and after BD reversibility test(OMEF 2s%and AMEF so%,respectively)in diagnosing asthma.Among these functional criteria,AMEF2;%and 0MEFs%≥25%performed the best diagnostic performance.The sensitivity,specificity,and accuracy of AMEF 25%≥25%as an objcctive diagnostic test for asthma were 63.29%,87.50%,and 67.21%,and of AMEFs0%≥25%were 79.23%,85.00%,and 80.16%,respectively.The area under the ROC curve of the indicators was 0.8203 and 0.9104,respectively.By contrast,an increase in FEV≥12%and 200 mL demonstrated a sensitivity of 62.32%,specificity of 82.50%,and accuracy of 65.59%in diagnosing asthma.The changes of MEF2s and MEFso before and after BD reversibility test may be of additional value in the clinical diagnosis of asthma,with cutoff values of 25%being the most. 展开更多
关键词 ASTHMA bronchodilator reversibility test maximum expiratory flow at 25%of vital capacity maximum expiratory flow at 50%of vital capacity
暂未订购
电力信息物理系统故障通信恢复策略 被引量:2
9
作者 杨挺 李浩 +1 位作者 赵宇明 刘亚闯 《电网技术》 北大核心 2025年第1期381-389,I0117,共10页
极端灾害将导致电力系统与通信系统同时发生大面积瘫痪,基于“保电救灾、通信先行”原则,优先恢复故障通信是支撑保障电力系统安全运行的关键。该文针对灾后电力通信高效恢复问题,提出了一种计及电力侧状态感知需求与运行调控能力保障... 极端灾害将导致电力系统与通信系统同时发生大面积瘫痪,基于“保电救灾、通信先行”原则,优先恢复故障通信是支撑保障电力系统安全运行的关键。该文针对灾后电力通信高效恢复问题,提出了一种计及电力侧状态感知需求与运行调控能力保障的增广路径最大流电力通信网络恢复算法。首先考虑到电力通信系统与电力物理系统的紧耦合特性,设计了计及电力侧影响的状态感知与运行调控能力量化指标,辨识关键信息节点。然后,通过图论最大流理论,搜寻关键信息节点的增广路径集。在此基础上,引入恢复贡献度,从增广路径集中选择具有大容量、低延时以及少故障链路的通信路径进行优先重建,为灾后电力系统快速恢复过程提供可达、可靠的通信支撑。最后,以IEEE39标准系统作为仿真算例,验证了所提恢复策略下的通信系统具有更高的通信服务质量(quality of service,QoS),避免了在恢复过程中由于带宽容量不足而发生业务频繁掉线风险。 展开更多
关键词 通信故障 电力信息物理系统 最大流理论 状态感知 运行调控
原文传递
冲击信号时频特征对泥石流成灾参数的响应规律
10
作者 张磊 张少杰 +1 位作者 杨红娟 杨超平 《自然灾害学报》 北大核心 2025年第3期110-118,共9页
泥石流密度和流速等成灾参数与泥石流的冲击破坏能力直接相关,影响着泥石流冲击力信号的时频特性,是防灾结构工程设计的重要依据。故而分析总结泥石流冲击信号时频特征对泥石流密度、流速等成灾参数的响应规律具有重要的理论研究价值,... 泥石流密度和流速等成灾参数与泥石流的冲击破坏能力直接相关,影响着泥石流冲击力信号的时频特性,是防灾结构工程设计的重要依据。故而分析总结泥石流冲击信号时频特征对泥石流密度、流速等成灾参数的响应规律具有重要的理论研究价值,研究成果可为反演泥石流成灾参数提供理论基础,并为泥石流的结构工程设计提供支撑。本研究以室内水槽实验为基础,设计了基于光纤布拉格光栅(Fiber Bragg Grating,FBG)的悬臂梁式测量系统,并利用该系统收集不同高程位置的泥石流冲击信号。水槽实验分析结果表明:冲击信号振幅与泥石流断面最大流速(表面流速)间呈二次函数映射关系(变系数);当泥石流密度增加,泥石流冲击信号频谱能量整体向低频频段转移;悬臂梁式测量系统中FBG布设高度增加,则所得到的冲击信号特征频率的功率密度线性增强。 展开更多
关键词 冲击力 冲击信号 时频特征 光纤布拉格光栅 断面最大流速(表面流速)
原文传递
航空电机薄壁异形孔零件刷盒冷挤压成形工艺
11
作者 袁玉红 刘詹 +1 位作者 伍太宾 金俊松 《锻压技术》 北大核心 2025年第2期85-93,共9页
针对航空直流电机刷盒中薄壁异形孔壁厚不均、对称度高等特点,设计了冷挤压成形工艺方案。运用模拟分析软件Deform-3D对异形孔复合挤压过程进行仿真,分析了变形金属流动特点、3个变形区的最大主应力状态及损伤值。结合正交实验,以预制... 针对航空直流电机刷盒中薄壁异形孔壁厚不均、对称度高等特点,设计了冷挤压成形工艺方案。运用模拟分析软件Deform-3D对异形孔复合挤压过程进行仿真,分析了变形金属流动特点、3个变形区的最大主应力状态及损伤值。结合正交实验,以预制坯孔径和凸模前端直径为影响因素,建立了2因素3水平正交实验方案,分析了不同工艺参数组合下的异形孔成形情况,极差分析结果表明:预制坯孔直径为Φ5.5 mm、凸模前端直径为Φ5.0 mm为最优工艺参数组合,此组合下圆孔与长方孔过渡圆弧面损伤值最小,薄壁孔产生裂纹倾向最小。在液压机上进行工艺实验验证,挤压件成形质量良好,达到设计要求。 展开更多
关键词 薄壁异形孔 冷挤压 金属流动特点 最大主应力 损伤值
原文传递
济生肾气丸联合内分泌治疗对晚期前列腺癌患者下尿路梗阻症状的效果
12
作者 丁睿 过俊杰 +2 位作者 周汶君 李建忠 陈健 《实用临床医药杂志》 2025年第20期56-59,共4页
目的观察济生肾气丸联合内分泌治疗对晚期前列腺癌(PCa)患者下尿路梗阻症状的效果。方法将68例合并下尿路梗阻症状的晚期PCa患者随机分为观察组和对照组,每组34例。对照组采用单纯内分泌治疗,观察组在对照组基础上加用济生肾气丸治疗,... 目的观察济生肾气丸联合内分泌治疗对晚期前列腺癌(PCa)患者下尿路梗阻症状的效果。方法将68例合并下尿路梗阻症状的晚期PCa患者随机分为观察组和对照组,每组34例。对照组采用单纯内分泌治疗,观察组在对照组基础上加用济生肾气丸治疗,疗程均为3个月。比较2组治疗总有效率、中医证候积分、最大尿流率(Q_(max))、残余尿量(RUV)、国际前列腺症状(IPSS)评分、前列腺特异性抗原(PSA)水平和生活质量量表(QOL)评分。结果观察组治疗总有效率为94.12%,高于对照组的82.35%,差异有统计学意义(P<0.05)。治疗后,2组中医证候积分均下降,且观察组中医证候积分低于对照组,差异均有统计学意义(P<0.05)。治疗后,2组Q_(max)均升高,RUV均下降,且观察组Q_(max)高于对照组,RUV低于对照组,差异均有统计学意义(P<0.05)。治疗后,2组PSA水平均较治疗前下降,差异有统计学意义(P<0.05),但2组PSA水平比较,差异无统计学意义(P>0.05)。治疗后,2组IPSS评分均下降,QOL评分均升高,且观察组IPSS评分低于对照组,QOL评分高于对照组,差异均有统计学意义(P<0.05)。结论济生肾气丸联合内分泌治疗能有效治疗晚期PCa患者排尿梗阻症状,改善中医证候,提高生活质量。 展开更多
关键词 济生肾气丸 内分泌治疗 前列腺癌 尿路梗阻 最大尿流率 残余尿量 中医证候积分 前列腺特异性抗原
暂未订购
水流速对福寿螺生长及摄食率的影响
13
作者 王淼 张玉平 袁永达 《生物安全学报(中英文)》 北大核心 2025年第4期331-337,共7页
【目的】探究福寿螺在不同流速下的生长及摄食情况,以期指导流水情况下的福寿螺防控。【方法】通过室内模拟试验,分别在3.8、7.7 cm·s^(-1)和无流速下,测定和分析福寿螺的壳高、体重、特定生长率和最大摄食率等指标。【结果】不同... 【目的】探究福寿螺在不同流速下的生长及摄食情况,以期指导流水情况下的福寿螺防控。【方法】通过室内模拟试验,分别在3.8、7.7 cm·s^(-1)和无流速下,测定和分析福寿螺的壳高、体重、特定生长率和最大摄食率等指标。【结果】不同流速下,福寿螺的平均壳高具显著差异(P<0.05),而平均体重无显著差异(P>0.05)。在3.8 cm·s^(-1)流速下的壳高增长率、体重增长率和特定生长率均高于7.7 cm·s^(-1)和无流速,但壳高增长率无显著差异(P>0.05),体重增长率和特定生长率均具显著差异(P<0.05)。3种流速下福寿螺的总死亡率为25.6%。其中,3.8 cm·s^(-1)流速下的死亡率为30.0%,7.7 cm·s^(-1)和无流速下的死亡率均为23.3%,不同流速下的死亡率无显著差异(P>0.05)。福寿螺在7.7 cm·s^(-1)流速下的最大摄食率显著高于3.8 cm·s^(-1)流速(P<0.05),无流速下的最大摄食率介于两者之间,且分别与两者的最大摄食率无显著差异(P>0.05)。【结论】适宜的流速会促进福寿螺的生长,但当流速继续增大时,限制福寿螺的生长,并显著提高其最大摄食率。 展开更多
关键词 福寿螺 水流速 特定生长率 最大摄食率
在线阅读 下载PDF
高速公路单车道车流非极大值抑制监测仿真
14
作者 武晓博 伍朝辉 《计算机仿真》 2025年第8期192-196,共5页
车流量变化受到多种因素的影响,并在空间和通道上存在复杂的交互关系,会导致特征提取过程过度关注局部特征,致使特征权重失衡,影响车流量预测效果。为提升道路通行效率,研究提出基于D-Link Net与形态学的高速公路单车道车流量监测方法... 车流量变化受到多种因素的影响,并在空间和通道上存在复杂的交互关系,会导致特征提取过程过度关注局部特征,致使特征权重失衡,影响车流量预测效果。为提升道路通行效率,研究提出基于D-Link Net与形态学的高速公路单车道车流量监测方法。首先,构建包含编码区、中心区和解码区的D-LinkNet结构,并在中心区中加入通道域和空间域双注意力。在通道域自动调整不同特征通道的权重,在空间域捕捉图像中的空间位置关系,更全面地获取单车道信息的全局特征。经由解码区输出道路特征提取结果后,通过形态学处理获得图像感兴趣区域。最后,利用改进YOLOv5模型的识别框并识别图像中车辆信息,并引入非极大值抑制剔除重复的识别框。将识别到的车辆信息绘制为车流量热力图,由此实现车流量监测。实验结果表明,上述方法 PR曲线更理想、AP值更高,且每秒检测到的帧数更多,说明上述方法有效实现了设计预期。 展开更多
关键词 高速公路单车道 车流量监测 形态学 非极大值抑制 通道域 空间域
在线阅读 下载PDF
中低转速下静子可调对变循环分离风扇流通能力的影响研究
15
作者 安广丰 周瑞 +1 位作者 于贤君 刘宝杰 《推进技术》 北大核心 2025年第1期60-74,共15页
可调静子是变循环分离风扇在中低转速下实现更大流通能力的关键手段。本文针对“2+1”和“1+2”两种构型变循环分离风扇的极限流通能力随进口导叶(IGV)和静子调节的变化规律展开了数值模拟研究。研究结果表明,涵道比和可调静子组合调节... 可调静子是变循环分离风扇在中低转速下实现更大流通能力的关键手段。本文针对“2+1”和“1+2”两种构型变循环分离风扇的极限流通能力随进口导叶(IGV)和静子调节的变化规律展开了数值模拟研究。研究结果表明,涵道比和可调静子组合调节情况下,“1+2”变循环分离风扇的极限流通能力更强;而涵道比固定为0.3时,“2+1”变循环分离风扇的极限流通能力更强。进一步的分析表明,IGV的调节角度决定了第一级风扇流量-压比特性线位置,从而决定了风扇的理论极限流通能力;而所有可调静子叶片的调节角度决定了第一级风扇与后面级风扇的匹配状态,从而决定了第一级风扇在自身特性线上匹配的最大流量状态,进而决定了风扇的实际极限流通能力。涵道比和可调静子组合调节情况下,“1+2”变循环分离风扇可用的IGV调节角度更大,因此其极限流通能力更强;涵道比固定情况下变循环分离风扇的极限流通能力与初始状态下各级的匹配有关,对于本文研究的两种构型变循环分离风扇,涵道比为0.3时“2+1”变循环分离风扇各级匹配状态有利于获得更大的可用IGV调节角度,因此其极限流通能力更强。 展开更多
关键词 变循环发动机 变循环分离风扇 可调静子 极限流通能力 级匹配分析
原文传递
动水条件下三维岩质滑坡涌浪爬高规律研究 被引量:1
16
作者 王梅力 田野 +1 位作者 王平义 杨胜发 《水利水运工程学报》 北大核心 2025年第1期111-119,共9页
借助动水条件下弯道浅水区三维散体岩质滑坡涌浪模型试验系统,研究水流动力影响下滑坡涌浪爬高的基本规律和最大爬高的确定方法。根据物理模型试验观测资料,计算得到爬高特征值;分析了水流流速、河道水深、滑坡方量、滑坡倾角对爬高的影... 借助动水条件下弯道浅水区三维散体岩质滑坡涌浪模型试验系统,研究水流动力影响下滑坡涌浪爬高的基本规律和最大爬高的确定方法。根据物理模型试验观测资料,计算得到爬高特征值;分析了水流流速、河道水深、滑坡方量、滑坡倾角对爬高的影响;通过多元非线性回归分析和最小二乘法分析,分别得到动水条件下三维涌浪沿对岸和同岸的爬高衰减公式,并与静水条件下散体岩质滑坡涌浪爬高衰减公式进行对比;采用无量纲及多元回归分析方法,给出动水条件下涌浪最大爬高计算式,并将计算结果与长江新滩滑坡涌浪实测资料进行对比验证,二者较为接近。 展开更多
关键词 滑坡涌浪 水流流速 涌浪爬高 最大爬高
在线阅读 下载PDF
流速变化对换热管振动特性的影响 被引量:1
17
作者 陈钦举 董金善 +1 位作者 吴倩倩 沈航宇 《石油化工设备》 2025年第3期37-41,共5页
管壳式热交换器作为热交换器的一种,广泛使用在工业生产领域中。近年来,从热交换器的损坏原因分析,很大比例的故障是由流体诱导振动引发的换热管失效所致。通过对热交换器壳程不同进口流速下的速度场进行模态分析,得到管壳式热交换器进... 管壳式热交换器作为热交换器的一种,广泛使用在工业生产领域中。近年来,从热交换器的损坏原因分析,很大比例的故障是由流体诱导振动引发的换热管失效所致。通过对热交换器壳程不同进口流速下的速度场进行模态分析,得到管壳式热交换器进口流速对固有频率的影响规律。结果表明,随着壳程进口流速的增大,换热管的固有频率随之减小。利用Origin软件拟合出流体流动状态换热管固有频率计算经验公式。分析得出不同壳程进口流速下进出口最大横流速度模拟值计算经验公式。 展开更多
关键词 换热管 振动 固有频率 最大横流速度
在线阅读 下载PDF
仿真厕所对尿动力检测中尿流率的影响
18
作者 周浩 窦启锋 +1 位作者 张会清 文建国 《武汉大学学报(医学版)》 2025年第4期511-516,共6页
目的:探讨仿真厕所在尿动力检测中对尿流率的影响。方法:选取2021年10月至2022年9月在新乡医学院第一附属医院就诊并经过筛查排除后最终入组的120例男性患者为研究对象,根据排尿状况分为两组进行评估,每组60名,分别为正常排尿组和异常... 目的:探讨仿真厕所在尿动力检测中对尿流率的影响。方法:选取2021年10月至2022年9月在新乡医学院第一附属医院就诊并经过筛查排除后最终入组的120例男性患者为研究对象,根据排尿状况分为两组进行评估,每组60名,分别为正常排尿组和异常排尿组。收集患者基本信息(年龄、身高、体质量、饮酒情况、既往病史、手术史等),研究对象分别通过仿真厕所尿流率测定和传统尿流率测定进行两次排尿,比较两种尿流的最大尿流率(Qmax)、平均尿流率(Qave)、尿流量、排尿时间、达峰时间和患者满意度调查评分。结果:在比较所有120名男性患者时,传统尿流率检测和仿真厕所尿流率检测的尿流参数以及对两次尿流率检测的患者满意度调查评分之间的差异具有统计学意义(P<0.05),传统尿流率测定的Qmax、Qave、尿流量、排尿时间、达峰时间均低于仿真厕所尿流率检测,传统测量方法的满意度评分低于仿真厕所。Qmax受不同排尿状况下不同检测方法检测的影响不同。分别在正常排尿组与异常排尿组中,两种尿流率检测方法的尿流参数之间差异均具有统计学意义(P<0.05),传统方式测量的Qmax、Qave、尿量均低于仿真厕所组,仿真厕所排尿的达峰时间更久,其排尿时间也更长。结论:仿真厕所尿流率检测更贴近日常排尿状况,可以提供给患者更舒适的感受,相较于传统尿流率测定,仿真厕所尿流率检测能得到更加符合真实排尿情况的尿流率测定结果。 展开更多
关键词 仿真厕所 传统尿流率检测 最大尿流率 平均尿流率
原文传递
PH-MaxFlow算法发现Web社区 被引量:1
19
作者 郭希娟 刘静 《计算机工程与应用》 CSCD 北大核心 2009年第5期113-116,共4页
HITS是一种经典的利用链接技术计算网页权威值和中心值的算法,它能够快速发现主题相关网页,其缺点是会发生"主题偏移"现象,首先提出PHITS算法,在一定程度上抑制了这种现象的发生。运用该方法提取权威值高的页面,作为PH-MaxFlo... HITS是一种经典的利用链接技术计算网页权威值和中心值的算法,它能够快速发现主题相关网页,其缺点是会发生"主题偏移"现象,首先提出PHITS算法,在一定程度上抑制了这种现象的发生。运用该方法提取权威值高的页面,作为PH-MaxFlow算法的种子节点,使得发现的Web社区更精确。同时提出了一种有效的评价Web社区的标准,用这个标准对原始最大流算法和提出的PH-MaxFlow算法进行比较,从而得出PH-MaxFlow算法发现的Web社区与主题更相关。 展开更多
关键词 WEB社区 基于超链接分析的主题搜索算法 最大流算法
在线阅读 下载PDF
Resource-constrained maximum network throughput on space networks 被引量:1
20
作者 Yanling Xing Ning Ge Youzheng Wang 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2015年第2期215-223,共9页
This paper investigates the maximum network through- put for resource-constrained space networks based on the delay and disruption-tolerant networking (DTN) architecture. Specifically, this paper proposes a methodol... This paper investigates the maximum network through- put for resource-constrained space networks based on the delay and disruption-tolerant networking (DTN) architecture. Specifically, this paper proposes a methodology for calculating the maximum network throughput of multiple transmission tasks under storage and delay constraints over a space network. A mixed-integer linear programming (MILP) is formulated to solve this problem. Simula- tions results show that the proposed methodology can successfully calculate the optimal throughput of a space network under storage and delay constraints, as well as a clear, monotonic relationship between end-to-end delay and the maximum network throughput under storage constraints. At the same time, the optimization re- sults shine light on the routing and transport protocol design in space communication, which can be used to obtain the optimal network throughput. 展开更多
关键词 throughput disruption-tolerant networking(DTN) maximum flow mixed-integer linear programming evolving graph space network
在线阅读 下载PDF
上一页 1 2 48 下一页 到第
使用帮助 返回顶部