This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX p...This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX phase via pressure-less sintering at 1000℃for 3 hours.XRD analysis reveals that the composition with x=y=0.2 exhibits a shift of diffraction peaks to higher angles,indicating lattice parameter changes,and achieves the highest phase purity with the maximum solid solution limit,further increases in the dopant content led to the formation of impurities.While the solid solution of magnetic elements preserves the characteristic layered structure of the MAX phase,it successfully induces magnetic properties.The magnetic transition temperatures for these solid solutions ranges from 61 to 200 K.Specifically,V_(2)(Mn_(x)Co_(y)Sn_(1-x-y))C demonstrated hard magnetic characteristics,with a high saturation magnetization(6.536 emu/g)and large remanence(4.236 emu/g).In contrast,V_(2)(Mn_(x)Fe_(y)Sn_(1-x-y))C and V2(Fe_(x)Co_(y)Sn_(1-x-y))C exhibits soft magnetic behavior,evidenced by their narrow hysteresis loops and low coercivity.Their saturation magnetization values are 3.80 and 1.784 emu/g,respectively.The distinctly"S"-shaped hysteresis loop of V_(2)(Fe_(x)Co_(y)Sn_(1-x-y))C further confirms its soft magnetic nature.展开更多
Microwave absorption(MA)materials often face poor synergy between impedance matching and attenuation in the low-frequency range.Balancing permittivity and permeability through magnetic-dielectric synergy is a promisin...Microwave absorption(MA)materials often face poor synergy between impedance matching and attenuation in the low-frequency range.Balancing permittivity and permeability through magnetic-dielectric synergy is a promising strategy to address this issue.To realize the synergy,herein,Sn whiskers with an in situ oxide layer served as substrates for magnetic-loss-active CoNi nanosheet growth,forming a hierarchical CoNi@SnO_(2)@Sn(CNS)heterostructure.The CNS absorber achieves a minimum reflection loss(RL_(min))value of-62.29 dB with an effective absorption bandwidth(EAB)of 2.2 GHz,covering the entire C-band with 70%absorption at only 2.61 mm thickness.The nanosheet design of CoNi enhances magnetic anisotropy to promote natural resonance,while the conductive Sn core and abundant Sn/SnO_(2) and CoNi/SnO_(2) heterointerfaces facilitate conduction loss and dielectric polarization.When composited into a thermoplastic polyurethane(TPU)matrix,the resulting CNS/TPU-2 film(20 wt%CNS)exhibits an RL_(min) value of-61.04 dB and a 2.5 GHz EAB.Its in-plane and through-plane thermal conductivities reach 2.41 and 0.51 W m^(-1) K^(-1),representing 4.1 and 2.6 times those of pure TPU films,respectively,facilitating heat dissipation from protected devices.This work provides valuable insights into magnetic-dielectric synergy for low-frequency MA of 1D metal-based materials,offering promising potential for 5G communications and flexible electronics.展开更多
基金Funded by the National Natural Science Foundation for Young Scholars of China(No.51302073)the Hubei Provincial Key Laboratory of Green Materials for Light Industry,Hubei University of Technology(No.202509B13)。
文摘This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX phase via pressure-less sintering at 1000℃for 3 hours.XRD analysis reveals that the composition with x=y=0.2 exhibits a shift of diffraction peaks to higher angles,indicating lattice parameter changes,and achieves the highest phase purity with the maximum solid solution limit,further increases in the dopant content led to the formation of impurities.While the solid solution of magnetic elements preserves the characteristic layered structure of the MAX phase,it successfully induces magnetic properties.The magnetic transition temperatures for these solid solutions ranges from 61 to 200 K.Specifically,V_(2)(Mn_(x)Co_(y)Sn_(1-x-y))C demonstrated hard magnetic characteristics,with a high saturation magnetization(6.536 emu/g)and large remanence(4.236 emu/g).In contrast,V_(2)(Mn_(x)Fe_(y)Sn_(1-x-y))C and V2(Fe_(x)Co_(y)Sn_(1-x-y))C exhibits soft magnetic behavior,evidenced by their narrow hysteresis loops and low coercivity.Their saturation magnetization values are 3.80 and 1.784 emu/g,respectively.The distinctly"S"-shaped hysteresis loop of V_(2)(Fe_(x)Co_(y)Sn_(1-x-y))C further confirms its soft magnetic nature.
基金supported by the National Natural Science Foundation of China(52171033,52431003,U23A20574)the Fundamental Research Funds for the Central Universities(2242025K20004)the SEU Innovation Capability Enhancement Plan for Doctoral Students(CXJH_SEU 24148,CXJH_SEU 25036).
文摘Microwave absorption(MA)materials often face poor synergy between impedance matching and attenuation in the low-frequency range.Balancing permittivity and permeability through magnetic-dielectric synergy is a promising strategy to address this issue.To realize the synergy,herein,Sn whiskers with an in situ oxide layer served as substrates for magnetic-loss-active CoNi nanosheet growth,forming a hierarchical CoNi@SnO_(2)@Sn(CNS)heterostructure.The CNS absorber achieves a minimum reflection loss(RL_(min))value of-62.29 dB with an effective absorption bandwidth(EAB)of 2.2 GHz,covering the entire C-band with 70%absorption at only 2.61 mm thickness.The nanosheet design of CoNi enhances magnetic anisotropy to promote natural resonance,while the conductive Sn core and abundant Sn/SnO_(2) and CoNi/SnO_(2) heterointerfaces facilitate conduction loss and dielectric polarization.When composited into a thermoplastic polyurethane(TPU)matrix,the resulting CNS/TPU-2 film(20 wt%CNS)exhibits an RL_(min) value of-61.04 dB and a 2.5 GHz EAB.Its in-plane and through-plane thermal conductivities reach 2.41 and 0.51 W m^(-1) K^(-1),representing 4.1 and 2.6 times those of pure TPU films,respectively,facilitating heat dissipation from protected devices.This work provides valuable insights into magnetic-dielectric synergy for low-frequency MA of 1D metal-based materials,offering promising potential for 5G communications and flexible electronics.
