The evolution of male preferences and of female ornaments in species with traditional sex roles （i.e., polygyny） have been highlighted as areas in need of more active research by an accumulation of recent findings. ...The evolution of male preferences and of female ornaments in species with traditional sex roles （i.e., polygyny） have been highlighted as areas in need of more active research by an accumulation of recent findings. The theoretical literature on these topics is relatively small and has centered on the evolution of male choice. Mathematical models have emphasized that, under polygyny, the evolution of male preferences faces much greater competition costs than does the evolution of female preferences. We discuss ways in which costly male choice can nonetheless evolve, via （1） direct selection that favors preferences, primarily through mating with highly fecund females, （2） mechanisms that rely on indirect selection, which weakly counters competitive costs of male preferences, and （3） genetic constraints, primarily in the form of pleiotropy of male and female preferences and traits. We also review a variety of mathematical models that have elucidated how costs to male preferences can be avoided. Finally, we turn our attention to the relatively scant theoretical literature on the effects of male mate choice on the evolution of female traits. We emphasize the finding that the presence of male preferences cannot be assumed to lead to the evolution of female ornaments during polygyny, and point out situations where models have elucidated ways in which female ornaments can nevertheless evolve.展开更多
Mathematical models of tire-lateral mad adhesion for use in mad vehicle dynamics studies are set up to express the relations of adhesion coefficients with slip ratio in lateral direction.The models of tire-lateral mad...Mathematical models of tire-lateral mad adhesion for use in mad vehicle dynamics studies are set up to express the relations of adhesion coefficients with slip ratio in lateral direction.The models of tire-lateral mad adhesion revolutionize the Pacejka's model in concept and therefore make it possible for applications in vehicle dynamics studies by the expression of lateral adhesion coefficient as a function of wheel slip ratio,instead of the wheel slip angle,taking into account in the mean time the influences of mad surface condition, vehicle velocity,vertical load,tire slip angle,and wheel camber angle.展开更多
Inclusion of dissipation and memory mechanisms, non-classical elasticity and thermal effects in the currently used plate/shell mathematical models require that we establish if these mathematical models can be derived ...Inclusion of dissipation and memory mechanisms, non-classical elasticity and thermal effects in the currently used plate/shell mathematical models require that we establish if these mathematical models can be derived using the conservation and balance laws of continuum mechanics in conjunction with the corresponding kinematic assumptions. This is referred to as thermodynamic consistency of the mathematical models. Thermodynamic consistency ensures thermodynamic equilibrium during the evolution of the deformation. When the mathematical models are thermodynamically consistent, the second law of thermodynamics facilitates consistent derivations of constitutive theories in the presence of dissipation and memory mechanisms. This is the main motivation for the work presented in this paper. In the currently used mathematical models for plates/shells based on the assumed kinematic relations, energy functional is constructed over the volume consisting of kinetic energy, strain energy and the potential energy of the loads. The Euler’s equations derived from the first variation of the energy functional for arbitrary length when set to zero yield the mathematical model(s) for the deforming plates/shells. Alternatively, principle of virtual work can also be used to derive the same mathematical model(s). For linear elastic reversible deformation physics with small deformation and small strain, these two approaches, based on energy functional and the principle of virtual work, yield the same mathematical models. These mathematical models hold for reversible mechanical deformation. In this paper, we examine whether the currently used plate/shell mathematical models with the corresponding kinematic assumptions can be derived using the conservation and balance laws of classical or non-classical continuum mechanics. The mathematical models based on Kirchhoff hypothesis (classical plate theory, CPT) and first order shear deformation theory (FSDT) that are representative of most mathematical models for plates/shells are investigated in this paper for their thermodynamic consistency. This is followed by the details of a general and higher order thermodynamically consistent plate/shell thermoelastic mathematical model that is free of a priori consideration of kinematic assumptions and remains valid for very thin as well as thick plates/shells with comprehensive nonlinear constitutive theories based on integrity. Model problem studies are presented for small deformation behavior of linear elastic plates in the absence of thermal effects and the results are compared with CPT and FSDT mathematical models.展开更多
The aim of this study was to investigate and determine the best mathematical models in describing vacuum drying characteristic of pomegranate arils in the range of 55-75 ℃. The vacuum batch dryer used in the evaluati...The aim of this study was to investigate and determine the best mathematical models in describing vacuum drying characteristic of pomegranate arils in the range of 55-75 ℃. The vacuum batch dryer used in the evaluation was successful in drying a thin layer of pomegranate arils from the initial moisture content of 464.02% （d.b.） to 6.18% （d.b.） within 6.5 to 13.5 hr of continuous drying at the above mentioned temperature range. The drying rates increased with an increase in temperature and drying time. Five of the well known semi-theoretical and empirical models were fitted to the vacuum drying of pomegranate arils. The semi-empirical Midilli model has shown an excellent fit to predict drying behavior of the pomegranate arils because this model gave the highest coefficient of determination （RE）, the least chi-square （X2）, and the lowest root mean square error （RMSE）. The total drying occurs during falling period, signifying the influence of moisture diffusion during the drying. The effective diffusivity varied from 1.25× 10^10 to 2.91 × 10^10 m^2/s over the temperature range. Temperature dependence of the diffusivity was well documented by Arrhenius models. The activation energy of moisture diffusion during drying was found to be 40.46 kJ/mol.展开更多
In this paper we develop modeling techniques for a social partitioning problem. Different social interaction regulations are imposed during pandemics to prevent the spread of diseases. We suggest partitioning a set of...In this paper we develop modeling techniques for a social partitioning problem. Different social interaction regulations are imposed during pandemics to prevent the spread of diseases. We suggest partitioning a set of company employees as an effective way to curb the spread, and use integer programming techniques to model it. The goal of the model is to maximize the number of direct interactions between employees who are essential for company’s work subject to the constraint that all employees should be partitioned into components of no more than a certain size implied by the regulations. Then we further develop the basic model to take into account different restrictions and provisions. We also give heuristics for solving the problem. Our computational results include sensitivity analysis on some of the models and analysis of the heuristic performance.展开更多
The method of combining a physical model with a mathematical model is described to study the concentration profile of pollutant dispersion in the Yangtze Estuary. the Experiments are described regarding a jet in a tid...The method of combining a physical model with a mathematical model is described to study the concentration profile of pollutant dispersion in the Yangtze Estuary. the Experiments are described regarding a jet in a tidal physical model and two-dimensional calculations of diffusion using momentum and mass conservation equations of unsteady flow. The feature of dispersion in the tidal flow, which is different from that in the steady flow such as rivers, is explained. Dilution and dispersion mainly depend on the volume of runoff and tidal range. The results of the measurement and calculation are presented, and it can be seen that they are in good agreement.展开更多
The effect of deformation conditions on dynamic recrystallization behavior of Nb,V,Ti microalloyed high-strength structural steel was investigated via high-temperature single pass reduction tests on a MMS-300 thermome...The effect of deformation conditions on dynamic recrystallization behavior of Nb,V,Ti microalloyed high-strength structural steel was investigated via high-temperature single pass reduction tests on a MMS-300 thermomechanical simulator,with mathematical models established for flow stress during hot deformation.The results show that the deformation resistance decreases with the increase of temperature and is in power function relationship with the temperature.Meanwhile,it increases with the increase of strain rate and is in log-log relationship with the strain rate.The dynamic recrystallization activation energy of tested steel was determined to be about 329.55 kJ/mol,295.31 kJ/mol at peak and steady states.The prediction models developed for flow stress indicated that they are in good agreement with experimental results.展开更多
With the interdisciplinary development of multiple disciplines,mathematical models play a role as a bridge in the research process of Chinese herbal compounds,which can make full use of the interrelationships of knowl...With the interdisciplinary development of multiple disciplines,mathematical models play a role as a bridge in the research process of Chinese herbal compounds,which can make full use of the interrelationships of knowledge,making the research and use of Chinese herbal compounds from complex and cumbersome to simple.This paper reviewed the research and application of mathematical models in the production and preparation,pharmacodynamics,pharmacokinetics and other aspects of Chinese herbal compound prescriptions,providing a theoretical basis for the development of the modern Chinese medicine industry.展开更多
This article focuses on the mathematical modelling of the extraction process of bioactive compounds from grape marc and berries (Aronia, rosehip, rowan, and hawthorn). The composition of the extraction medium (the con...This article focuses on the mathematical modelling of the extraction process of bioactive compounds from grape marc and berries (Aronia, rosehip, rowan, and hawthorn). The composition of the extraction medium (the concentration of the ethyl alcohol) served as a factor of influence. Furthermore, 8 experimental measured parameters were used as variables. The experimental results were processed using Hermite polynomials. In order to adapt the degree of the polynomial, the following conditions were imposed: high precision of the mathematical model by appealing to models on interval;obtaining a nominal model and two uncertain models (upper and lower);deduction of two predictive models, one superior and one inferior. It was found that the mathematical models based on Hermite polynomials do not provide explicit analytical expressions, although they allow the establishment of parameter values for any concentration of the extraction medium. In some cases, only high-grade polynomial models ensure the modelling error below 2%. Uncertain models (upper and lower 95%) include all experimental data. Predictive mathematical models (upper and lower) were established for a high prediction. The analytical expressions of the mathematical models on intervals are non-gaps, the coefficients having non-zero values. Dependencies between the measured parameters and the composition of the extraction solvent were analyzed, the results being presented through the calculation of a surface, with all the experimental values and their average values. Thus, it was found that polynomial mathematical models provide complete information for modelling the extraction processes of bioactive compounds of plant origin.展开更多
Background： Sperm DNA fragmentation（sDF） has been proved to be an important parameter in order to predict in vitro the potential fertility of a semen sample. Colloid centrifugation could be a suitable technique to ...Background： Sperm DNA fragmentation（sDF） has been proved to be an important parameter in order to predict in vitro the potential fertility of a semen sample. Colloid centrifugation could be a suitable technique to select those donkey sperm more resistant to DNA fragmentation after thawing. Previous studies have shown that to elucidate the latent damage of the DNA molecule, sDF should be assessed dynamically, where the rate of fragmentation between treatments indicates how resistant the DNA is to iatrogenic damage. The rate of fragmentation is calculated using the slope of a linear regression equation. However, it has not been studied if s DF dynamics fit this model. The objectives of this study were to evaluate the effect of different after-thawing centrifugation protocols on sperm DNA fragmentation and elucidate the most accurate mathematical model（linear regression, exponential or polynomial） for DNA fragmentation over time in frozen-thawed donkey semen.Results： After submitting post-thaw semen samples to no centrifugation（UDC）, sperm washing（SW） or single layer centrifugation（SLC） protocols, sD F values after 6 h of incubation were significantly lower in SLC samples than in SW or UDC.Coefficient of determination（R-2） values were significantly higher for a second order polynomial model than for linear or exponential. The highest values for acceleration of fragmentation（aSDF） were obtained for SW, fol owed by SLC and UDC.Conclusion： SLC after thawing seems to preserve longer DNA longevity in comparison to UDC and SW. Moreover,the fine-tuning of models has shown that sDF dynamics in frozen-thawed donkey semen fit a second order polynomial model, which implies that fragmentation rate is not constant and fragmentation acceleration must be taken into account to elucidate hidden damage in the DNA molecule.展开更多
Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape not...Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.展开更多
Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for...Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.展开更多
Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematica...Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.展开更多
Foam diversion can effectively solve the problem of uneven distribution of acid in layers of different permeabilities during matrix acidizing. Based on gas trapping theory and the mass conservation equation, mathemati...Foam diversion can effectively solve the problem of uneven distribution of acid in layers of different permeabilities during matrix acidizing. Based on gas trapping theory and the mass conservation equation, mathematical models were developed for foam-diverted acidizing, which can be achieved by a foam slug followed by acid injection or by continuous injection of foamed acid. The design method for foam-diverted acidizing was also given. The mathematical models were solved by a computer program. Computed results show that the total formation skin factor, wellhead pressure and bottomhole pressure increase with foam injection, but decrease with acid injection. Volume flow rate in a highpermeability layer decreases, while that in a low-permeability layer increases, thus diverting acid to the low-permeability layer from the high-permeability layer. Under the same formation conditions, for foamed acid treatment the operation was longer, and wellhead and bottomhole pressures are higher. Field application shows that foam slug can effectively block high permeability layers, and improve intake profile noticeably.展开更多
In order to expand the engineering application of recycle aggregate mortars （RAM） with aggregates from demolished concretes, the models for the properties of RAM and the replacement rate of these recycled fine aggre...In order to expand the engineering application of recycle aggregate mortars （RAM） with aggregates from demolished concretes, the models for the properties of RAM and the replacement rate of these recycled fine aggregates were proposed. First, different kinds of mathematical models for the basic properties （compressive strength, water retention rate, and consistency loss） of RAM with two kinds of admixtures, thickening powders （TP） and self-made powdery admixtures （SSCT） designed for RAM, and the replacement rates were established, while the average relative errors and relative standard errors of these models were calculated. Additionally, the models and their error analyses for the curves of drying shrinkage and curing time of RAM ＋ SSCT at different replacement rates were put forward. The results show that polynomial functions should be used to calculate the basic properties of RAM ＋ TP and RAM ＋ SSCT at different replacement rates. In addition, polynonfial functions are the most optimal models for the sharp shrinkage sections in the curves of drying shrinkage-curing time of RAM ＋ SSCT, while exponential functions should be used as the models for the slow shrinkage sections and steady shrinkage sections.展开更多
This paper presents a practical three dimensional mathematical model of circulation and heat transfer in generator of glass melting furnaces. The model was based on the heat transfer between the smoke flow and the la...This paper presents a practical three dimensional mathematical model of circulation and heat transfer in generator of glass melting furnaces. The model was based on the heat transfer between the smoke flow and the lattice units, and between the air flow and the lattice units. This model not only bypassed the difficulty of complicated computation of the heat transfer process in the regenerator of glass furnaces, but also avoided the irrationality of fixing the temperature distribution on the surfaces. Use of the model yielded very important data and also the method for the design of the regenerator of glass furnaces in practical production.展开更多
Energy methods and the principle of virtual work are commonly used for obtaining solutions of boundary value problems (BVPs) and initial value problems (IVPs) associated with homogeneous, isotropic and non-homogeneous...Energy methods and the principle of virtual work are commonly used for obtaining solutions of boundary value problems (BVPs) and initial value problems (IVPs) associated with homogeneous, isotropic and non-homogeneous, non-isotropic matter without using (or in the absence of) the mathematical models of the BVPs and the IVPs. These methods are also used for deriving mathematical models for BVPs and IVPs associated with isotropic, homogeneous as well as non-homogeneous, non-isotropic continuous matter. In energy methods when applied to IVPs, one constructs energy functional (<i>I</i>) consisting of kinetic energy, strain energy and the potential energy of loads. The first variation of this energy functional (<em>δI</em>) set to zero is a necessary condition for an extremum of <i>I</i>. In this approach one could use <i>δI</i> = 0 directly in constructing computational processes such as the finite element method or could derive Euler’s equations (differential or partial differential equations) from <i>δI</i> = 0, which is also satisfied by a solution obtained from <i>δI</i> = 0. The Euler’s equations obtained from <i>δI</i> = 0 indeed are the mathematical model associated with the energy functional <i>I</i>. In case of BVPs we follow the same approach except in this case, the energy functional <i>I</i> consists of strain energy and the potential energy of loads. In using the principle of virtual work for BVPs and the IVPs, we can also accomplish the same as described above using energy methods. In this paper we investigate consistency and validity of the mathematical models for isotropic, homogeneous and non-isotropic, non-homogeneous continuous matter for BVPs that are derived using energy functional consisting of strain energy and the potential energy of loads. Similar investigation is also presented for IVPs using energy functional consisting of kinetic energy, strain energy and the potential energy of loads. The computational approaches for BVPs and the IVPs designed using energy functional and principle of virtual work, their consistency and validity are also investigated. Classical continuum mechanics (CCM) principles <i>i.e.</i> conservation and balance laws of CCM with consistent constitutive theories and the elements of calculus of variations are employed in the investigations presented in this paper.展开更多
Multi-stage SRV fracturing in horizontal wells is a new technology developed at home and abroad in recent years to effectively develop shale gas or low-permeability reservoirs,but on the other hand makes the mechanica...Multi-stage SRV fracturing in horizontal wells is a new technology developed at home and abroad in recent years to effectively develop shale gas or low-permeability reservoirs,but on the other hand makes the mechanical environment of fracturing strings more complicated at the same time.In view of this,based on the loading features of tubing strings during the multi-stage fracturing of a horizontal well,mechanical models were established for three working cases of multiple packer setting,open differential-pressure sliding sleeve,and open ball-injection sliding sleeve under a hold-down packer.Moreover,mathematical models were respectively built for the above three cases.According to the Lame formula and Von Mises stress calculation formula for the thick-walled cylinder in the theory of elastic mechanics,a mathematical model was also established to calculate the equivalent stress for tubing string safety evaluation when the fracturing string was under the combined action of inner pressure,external squeezing force and axial stress,and another mathematical model was built for the mechanical strength and safety evaluation of multi-stage fracturing strings.In addition,a practical software was developed for the mechanical safety evaluation of horizontal well multi-stage fracturing strings according to the mathematical model developed for the mechanical calculation of the multi-packer string in horizontal wells.The research results were applied and verified in a gas well of Tahe Oilfield in the Tarim Basin with excellent effects,providing a theoretical basis and a simple and reliable technical means for optimal design and safety evaluation of safe operational parameters of multistage fracturing strings in horizontal wells.展开更多
It is essential to manage customers' diverse desires and to keep manufacturing costs as low as possible for survival in competition and eventually in production.Sharing resources in manufacturing for different pro...It is essential to manage customers' diverse desires and to keep manufacturing costs as low as possible for survival in competition and eventually in production.Sharing resources in manufacturing for different products is a vital method of accomplishing this goal.The advantages of using a common process in production are stated in the literature.However,the mathematical models as well as simulation or conceptual models are not sufficient.The main objective of this paper is to develop mathematical models for multiproduct and multistage production under quality and breakdown uncertainties.The idea of the process commonality is incorporated in the proposed models.The models are validated by primary data collected from a Malaysian company and comparison of the timely requirement schedules of earlier MRP II and the proposed models under stable and perfect production environments.An appreciable convergence of the outcomes is observed.However,the proposed models are carrying additional information about the available locations of the parts in a time frame.After validation,the effects of process commonality on cost,capacity and the requirement schedule under uncertainties are examined.It is observed that the use of common processes in manufacturing is always better than the non-commonality scenario in terms of production cost.However,the increase in capacity requirement for commonality designs is higher for an ideal system,while it is less when the system suffers from breakdowns and a quality problem.展开更多
The aim of this study is to build two mathematical models of canine ionic currents specific to right atria and left atria.The canine left atria mathematical model was firstly modified from the Ramirez-Nattel-Courteman...The aim of this study is to build two mathematical models of canine ionic currents specific to right atria and left atria.The canine left atria mathematical model was firstly modified from the Ramirez-Nattel-Courtemanche(RNC) model using the recently available experimental data of ionic currents and was further developed based on our own experimental data.A model of right atria was then built by considering the differences between right atria and left atria.The two developed models well reproduced the experimental data on action potential morphology,the rate dependence,and action potential duration restitution.They are useful for investigating the mechanisms underlying the het-erogeneity of canine regional action potentials and would help the simulation of whole heart excitation propagation and cardiac arrhythmia in the near future.展开更多
文摘The evolution of male preferences and of female ornaments in species with traditional sex roles （i.e., polygyny） have been highlighted as areas in need of more active research by an accumulation of recent findings. The theoretical literature on these topics is relatively small and has centered on the evolution of male choice. Mathematical models have emphasized that, under polygyny, the evolution of male preferences faces much greater competition costs than does the evolution of female preferences. We discuss ways in which costly male choice can nonetheless evolve, via （1） direct selection that favors preferences, primarily through mating with highly fecund females, （2） mechanisms that rely on indirect selection, which weakly counters competitive costs of male preferences, and （3） genetic constraints, primarily in the form of pleiotropy of male and female preferences and traits. We also review a variety of mathematical models that have elucidated how costs to male preferences can be avoided. Finally, we turn our attention to the relatively scant theoretical literature on the effects of male mate choice on the evolution of female traits. We emphasize the finding that the presence of male preferences cannot be assumed to lead to the evolution of female ornaments during polygyny, and point out situations where models have elucidated ways in which female ornaments can nevertheless evolve.
文摘Mathematical models of tire-lateral mad adhesion for use in mad vehicle dynamics studies are set up to express the relations of adhesion coefficients with slip ratio in lateral direction.The models of tire-lateral mad adhesion revolutionize the Pacejka's model in concept and therefore make it possible for applications in vehicle dynamics studies by the expression of lateral adhesion coefficient as a function of wheel slip ratio,instead of the wheel slip angle,taking into account in the mean time the influences of mad surface condition, vehicle velocity,vertical load,tire slip angle,and wheel camber angle.
文摘Inclusion of dissipation and memory mechanisms, non-classical elasticity and thermal effects in the currently used plate/shell mathematical models require that we establish if these mathematical models can be derived using the conservation and balance laws of continuum mechanics in conjunction with the corresponding kinematic assumptions. This is referred to as thermodynamic consistency of the mathematical models. Thermodynamic consistency ensures thermodynamic equilibrium during the evolution of the deformation. When the mathematical models are thermodynamically consistent, the second law of thermodynamics facilitates consistent derivations of constitutive theories in the presence of dissipation and memory mechanisms. This is the main motivation for the work presented in this paper. In the currently used mathematical models for plates/shells based on the assumed kinematic relations, energy functional is constructed over the volume consisting of kinetic energy, strain energy and the potential energy of the loads. The Euler’s equations derived from the first variation of the energy functional for arbitrary length when set to zero yield the mathematical model(s) for the deforming plates/shells. Alternatively, principle of virtual work can also be used to derive the same mathematical model(s). For linear elastic reversible deformation physics with small deformation and small strain, these two approaches, based on energy functional and the principle of virtual work, yield the same mathematical models. These mathematical models hold for reversible mechanical deformation. In this paper, we examine whether the currently used plate/shell mathematical models with the corresponding kinematic assumptions can be derived using the conservation and balance laws of classical or non-classical continuum mechanics. The mathematical models based on Kirchhoff hypothesis (classical plate theory, CPT) and first order shear deformation theory (FSDT) that are representative of most mathematical models for plates/shells are investigated in this paper for their thermodynamic consistency. This is followed by the details of a general and higher order thermodynamically consistent plate/shell thermoelastic mathematical model that is free of a priori consideration of kinematic assumptions and remains valid for very thin as well as thick plates/shells with comprehensive nonlinear constitutive theories based on integrity. Model problem studies are presented for small deformation behavior of linear elastic plates in the absence of thermal effects and the results are compared with CPT and FSDT mathematical models.
文摘The aim of this study was to investigate and determine the best mathematical models in describing vacuum drying characteristic of pomegranate arils in the range of 55-75 ℃. The vacuum batch dryer used in the evaluation was successful in drying a thin layer of pomegranate arils from the initial moisture content of 464.02% （d.b.） to 6.18% （d.b.） within 6.5 to 13.5 hr of continuous drying at the above mentioned temperature range. The drying rates increased with an increase in temperature and drying time. Five of the well known semi-theoretical and empirical models were fitted to the vacuum drying of pomegranate arils. The semi-empirical Midilli model has shown an excellent fit to predict drying behavior of the pomegranate arils because this model gave the highest coefficient of determination （RE）, the least chi-square （X2）, and the lowest root mean square error （RMSE）. The total drying occurs during falling period, signifying the influence of moisture diffusion during the drying. The effective diffusivity varied from 1.25× 10^10 to 2.91 × 10^10 m^2/s over the temperature range. Temperature dependence of the diffusivity was well documented by Arrhenius models. The activation energy of moisture diffusion during drying was found to be 40.46 kJ/mol.
文摘In this paper we develop modeling techniques for a social partitioning problem. Different social interaction regulations are imposed during pandemics to prevent the spread of diseases. We suggest partitioning a set of company employees as an effective way to curb the spread, and use integer programming techniques to model it. The goal of the model is to maximize the number of direct interactions between employees who are essential for company’s work subject to the constraint that all employees should be partitioned into components of no more than a certain size implied by the regulations. Then we further develop the basic model to take into account different restrictions and provisions. We also give heuristics for solving the problem. Our computational results include sensitivity analysis on some of the models and analysis of the heuristic performance.
文摘The method of combining a physical model with a mathematical model is described to study the concentration profile of pollutant dispersion in the Yangtze Estuary. the Experiments are described regarding a jet in a tidal physical model and two-dimensional calculations of diffusion using momentum and mass conservation equations of unsteady flow. The feature of dispersion in the tidal flow, which is different from that in the steady flow such as rivers, is explained. Dilution and dispersion mainly depend on the volume of runoff and tidal range. The results of the measurement and calculation are presented, and it can be seen that they are in good agreement.
文摘The effect of deformation conditions on dynamic recrystallization behavior of Nb,V,Ti microalloyed high-strength structural steel was investigated via high-temperature single pass reduction tests on a MMS-300 thermomechanical simulator,with mathematical models established for flow stress during hot deformation.The results show that the deformation resistance decreases with the increase of temperature and is in power function relationship with the temperature.Meanwhile,it increases with the increase of strain rate and is in log-log relationship with the strain rate.The dynamic recrystallization activation energy of tested steel was determined to be about 329.55 kJ/mol,295.31 kJ/mol at peak and steady states.The prediction models developed for flow stress indicated that they are in good agreement with experimental results.
文摘With the interdisciplinary development of multiple disciplines,mathematical models play a role as a bridge in the research process of Chinese herbal compounds,which can make full use of the interrelationships of knowledge,making the research and use of Chinese herbal compounds from complex and cumbersome to simple.This paper reviewed the research and application of mathematical models in the production and preparation,pharmacodynamics,pharmacokinetics and other aspects of Chinese herbal compound prescriptions,providing a theoretical basis for the development of the modern Chinese medicine industry.
文摘This article focuses on the mathematical modelling of the extraction process of bioactive compounds from grape marc and berries (Aronia, rosehip, rowan, and hawthorn). The composition of the extraction medium (the concentration of the ethyl alcohol) served as a factor of influence. Furthermore, 8 experimental measured parameters were used as variables. The experimental results were processed using Hermite polynomials. In order to adapt the degree of the polynomial, the following conditions were imposed: high precision of the mathematical model by appealing to models on interval;obtaining a nominal model and two uncertain models (upper and lower);deduction of two predictive models, one superior and one inferior. It was found that the mathematical models based on Hermite polynomials do not provide explicit analytical expressions, although they allow the establishment of parameter values for any concentration of the extraction medium. In some cases, only high-grade polynomial models ensure the modelling error below 2%. Uncertain models (upper and lower 95%) include all experimental data. Predictive mathematical models (upper and lower) were established for a high prediction. The analytical expressions of the mathematical models on intervals are non-gaps, the coefficients having non-zero values. Dependencies between the measured parameters and the composition of the extraction solvent were analyzed, the results being presented through the calculation of a surface, with all the experimental values and their average values. Thus, it was found that polynomial mathematical models provide complete information for modelling the extraction processes of bioactive compounds of plant origin.
基金partially supported by grants RZ2009-00006-00-00(Instituto Nacional de Investigacion y Tecnología Agraria y Alimentaria,Ministerio de Ciencia e Innovación,Spain)AGL-2013-42726-R(Secretaria de Estado de Investigacion,Desarrollo e Innovacion,Ministerio de Economia y Competitividad,Spain)+1 种基金supported by a Ph.D.fellowship from the ceiA3(Andalucia,Spain)with funding provided by Banco Santander through its Global Division,Santander Universidadesfunded by the Swedish Foundation for Equine Research,Stockholm,Sweden(H14-47-008)
文摘Background： Sperm DNA fragmentation（sDF） has been proved to be an important parameter in order to predict in vitro the potential fertility of a semen sample. Colloid centrifugation could be a suitable technique to select those donkey sperm more resistant to DNA fragmentation after thawing. Previous studies have shown that to elucidate the latent damage of the DNA molecule, sDF should be assessed dynamically, where the rate of fragmentation between treatments indicates how resistant the DNA is to iatrogenic damage. The rate of fragmentation is calculated using the slope of a linear regression equation. However, it has not been studied if s DF dynamics fit this model. The objectives of this study were to evaluate the effect of different after-thawing centrifugation protocols on sperm DNA fragmentation and elucidate the most accurate mathematical model（linear regression, exponential or polynomial） for DNA fragmentation over time in frozen-thawed donkey semen.Results： After submitting post-thaw semen samples to no centrifugation（UDC）, sperm washing（SW） or single layer centrifugation（SLC） protocols, sD F values after 6 h of incubation were significantly lower in SLC samples than in SW or UDC.Coefficient of determination（R-2） values were significantly higher for a second order polynomial model than for linear or exponential. The highest values for acceleration of fragmentation（aSDF） were obtained for SW, fol owed by SLC and UDC.Conclusion： SLC after thawing seems to preserve longer DNA longevity in comparison to UDC and SW. Moreover,the fine-tuning of models has shown that sDF dynamics in frozen-thawed donkey semen fit a second order polynomial model, which implies that fragmentation rate is not constant and fragmentation acceleration must be taken into account to elucidate hidden damage in the DNA molecule.
基金Project(51004085)supported by the National Natural Science Foundation of China
文摘Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.
基金Project(NCET-05-0630) supported by Program for New Century Excellent Talents in University of China
文摘Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.
基金Project(NCET050630) supported by Program for New Century Excellent Talents in University,China
文摘Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.
文摘Foam diversion can effectively solve the problem of uneven distribution of acid in layers of different permeabilities during matrix acidizing. Based on gas trapping theory and the mass conservation equation, mathematical models were developed for foam-diverted acidizing, which can be achieved by a foam slug followed by acid injection or by continuous injection of foamed acid. The design method for foam-diverted acidizing was also given. The mathematical models were solved by a computer program. Computed results show that the total formation skin factor, wellhead pressure and bottomhole pressure increase with foam injection, but decrease with acid injection. Volume flow rate in a highpermeability layer decreases, while that in a low-permeability layer increases, thus diverting acid to the low-permeability layer from the high-permeability layer. Under the same formation conditions, for foamed acid treatment the operation was longer, and wellhead and bottomhole pressures are higher. Field application shows that foam slug can effectively block high permeability layers, and improve intake profile noticeably.
基金The National Key Research and Development Program of China(No.2017YFC0703100)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX18_0081)
文摘In order to expand the engineering application of recycle aggregate mortars （RAM） with aggregates from demolished concretes, the models for the properties of RAM and the replacement rate of these recycled fine aggregates were proposed. First, different kinds of mathematical models for the basic properties （compressive strength, water retention rate, and consistency loss） of RAM with two kinds of admixtures, thickening powders （TP） and self-made powdery admixtures （SSCT） designed for RAM, and the replacement rates were established, while the average relative errors and relative standard errors of these models were calculated. Additionally, the models and their error analyses for the curves of drying shrinkage and curing time of RAM ＋ SSCT at different replacement rates were put forward. The results show that polynomial functions should be used to calculate the basic properties of RAM ＋ TP and RAM ＋ SSCT at different replacement rates. In addition, polynonfial functions are the most optimal models for the sharp shrinkage sections in the curves of drying shrinkage-curing time of RAM ＋ SSCT, while exponential functions should be used as the models for the slow shrinkage sections and steady shrinkage sections.
文摘This paper presents a practical three dimensional mathematical model of circulation and heat transfer in generator of glass melting furnaces. The model was based on the heat transfer between the smoke flow and the lattice units, and between the air flow and the lattice units. This model not only bypassed the difficulty of complicated computation of the heat transfer process in the regenerator of glass furnaces, but also avoided the irrationality of fixing the temperature distribution on the surfaces. Use of the model yielded very important data and also the method for the design of the regenerator of glass furnaces in practical production.
文摘Energy methods and the principle of virtual work are commonly used for obtaining solutions of boundary value problems (BVPs) and initial value problems (IVPs) associated with homogeneous, isotropic and non-homogeneous, non-isotropic matter without using (or in the absence of) the mathematical models of the BVPs and the IVPs. These methods are also used for deriving mathematical models for BVPs and IVPs associated with isotropic, homogeneous as well as non-homogeneous, non-isotropic continuous matter. In energy methods when applied to IVPs, one constructs energy functional (<i>I</i>) consisting of kinetic energy, strain energy and the potential energy of loads. The first variation of this energy functional (<em>δI</em>) set to zero is a necessary condition for an extremum of <i>I</i>. In this approach one could use <i>δI</i> = 0 directly in constructing computational processes such as the finite element method or could derive Euler’s equations (differential or partial differential equations) from <i>δI</i> = 0, which is also satisfied by a solution obtained from <i>δI</i> = 0. The Euler’s equations obtained from <i>δI</i> = 0 indeed are the mathematical model associated with the energy functional <i>I</i>. In case of BVPs we follow the same approach except in this case, the energy functional <i>I</i> consists of strain energy and the potential energy of loads. In using the principle of virtual work for BVPs and the IVPs, we can also accomplish the same as described above using energy methods. In this paper we investigate consistency and validity of the mathematical models for isotropic, homogeneous and non-isotropic, non-homogeneous continuous matter for BVPs that are derived using energy functional consisting of strain energy and the potential energy of loads. Similar investigation is also presented for IVPs using energy functional consisting of kinetic energy, strain energy and the potential energy of loads. The computational approaches for BVPs and the IVPs designed using energy functional and principle of virtual work, their consistency and validity are also investigated. Classical continuum mechanics (CCM) principles <i>i.e.</i> conservation and balance laws of CCM with consistent constitutive theories and the elements of calculus of variations are employed in the investigations presented in this paper.
基金Foundation for Doctors from the Chinese Ministry of Education(No.20135121110005)National Major Science&Technology Project“Key technology for well bores in marine carbonate reservoirs”(No.2011ZX05005-006).
文摘Multi-stage SRV fracturing in horizontal wells is a new technology developed at home and abroad in recent years to effectively develop shale gas or low-permeability reservoirs,but on the other hand makes the mechanical environment of fracturing strings more complicated at the same time.In view of this,based on the loading features of tubing strings during the multi-stage fracturing of a horizontal well,mechanical models were established for three working cases of multiple packer setting,open differential-pressure sliding sleeve,and open ball-injection sliding sleeve under a hold-down packer.Moreover,mathematical models were respectively built for the above three cases.According to the Lame formula and Von Mises stress calculation formula for the thick-walled cylinder in the theory of elastic mechanics,a mathematical model was also established to calculate the equivalent stress for tubing string safety evaluation when the fracturing string was under the combined action of inner pressure,external squeezing force and axial stress,and another mathematical model was built for the mechanical strength and safety evaluation of multi-stage fracturing strings.In addition,a practical software was developed for the mechanical safety evaluation of horizontal well multi-stage fracturing strings according to the mathematical model developed for the mechanical calculation of the multi-packer string in horizontal wells.The research results were applied and verified in a gas well of Tahe Oilfield in the Tarim Basin with excellent effects,providing a theoretical basis and a simple and reliable technical means for optimal design and safety evaluation of safe operational parameters of multistage fracturing strings in horizontal wells.
文摘It is essential to manage customers' diverse desires and to keep manufacturing costs as low as possible for survival in competition and eventually in production.Sharing resources in manufacturing for different products is a vital method of accomplishing this goal.The advantages of using a common process in production are stated in the literature.However,the mathematical models as well as simulation or conceptual models are not sufficient.The main objective of this paper is to develop mathematical models for multiproduct and multistage production under quality and breakdown uncertainties.The idea of the process commonality is incorporated in the proposed models.The models are validated by primary data collected from a Malaysian company and comparison of the timely requirement schedules of earlier MRP II and the proposed models under stable and perfect production environments.An appreciable convergence of the outcomes is observed.However,the proposed models are carrying additional information about the available locations of the parts in a time frame.After validation,the effects of process commonality on cost,capacity and the requirement schedule under uncertainties are examined.It is observed that the use of common processes in manufacturing is always better than the non-commonality scenario in terms of production cost.However,the increase in capacity requirement for commonality designs is higher for an ideal system,while it is less when the system suffers from breakdowns and a quality problem.
基金supported by the National Basic Research Program (973) of China (No.2007CB512100)the National High-Tech R & D Program (863) of China (No.2006AA02Z307)the National Natural Science Foundation of China (No.30570484)
文摘The aim of this study is to build two mathematical models of canine ionic currents specific to right atria and left atria.The canine left atria mathematical model was firstly modified from the Ramirez-Nattel-Courtemanche(RNC) model using the recently available experimental data of ionic currents and was further developed based on our own experimental data.A model of right atria was then built by considering the differences between right atria and left atria.The two developed models well reproduced the experimental data on action potential morphology,the rate dependence,and action potential duration restitution.They are useful for investigating the mechanisms underlying the het-erogeneity of canine regional action potentials and would help the simulation of whole heart excitation propagation and cardiac arrhythmia in the near future.
