Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with ...Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with multidirectional structure during UAG is challenging,impeding the progress and improvement of the UAG process.This work examined the impact of ultrasonic vibration on the dynamic mechanical characteristics during processing.Additionally,we experimentally elucidated the material removal mechanism of CMCs during the scratching process under the influence of vertical vibration.The results indicate that the introduction of ultrasonic vibration causes a strain rate effect,resulting in a modification of the material removal mechanism,subsequently impacting the processing quality.Ultrasonic vibration increases the dynamic strength and brittleness of the fibers in CMCs,leading to more cracks at fracture,which changes from the original bending fracture to shear fracture.In addition,ultrasonic vibration can effectively inhibit the impact of scratching depth and anisotropy on the removal mechanism of CMCs,resulting in a more uniform surface of CMCs after processing.展开更多
Moisture electricity generation(MEG)has emerged as a sustainable and versatile energy-harvesting technology capable of converting ubiquitous environmental moisture into electrical energy,which holds great promise for ...Moisture electricity generation(MEG)has emerged as a sustainable and versatile energy-harvesting technology capable of converting ubiquitous environmental moisture into electrical energy,which holds great promise for renewable energy and constructing self-powered electronics.In this review,we begin by outlining the fundamental mechanisms—ion diffusion,electric double layer formation,and streaming potential—that govern charge transport for MEG in moist environments.A comprehensive survey of material innovations follows,highlighting breakthroughs in carbon-based materials,conductive polymers,hydrogels,and bio-inspired systems that enhance MEG performance,scalability,and biocompatibility.We then explore a range of device architectures,from planar and layered systems to flexible,miniaturized,and textile-integrated designs,engineered for both energy conversion and sensor integration.Key challenges are analyzed,along with strategies for overcoming them.We conclude with a forward-looking perspective on future directions,including hybrid energy systems,AI-assisted material design,and real-world deployment.This review presents a timely and comprehensive overview of MEG technologies and their trajectory toward practical and sustainable energy solutions.展开更多
The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during pen...The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during penetrating multi-layered plates,and generating a multipeak overpressure behind the plates.Here analytical models of RMFS self-distributed energy release and equivalent deflagration are developed.The multipeak overpressure formation model based on the single deflagration overpressure expression was promoted.The impact tests of RMFS on multi-layered plates at 584 m/s,616 m/s,and819 m/s were performed to validate the analytical model.Further,the influence of a single overpressure peak and time intervals versus impact velocity is discussed.The analysis results indicate that the deflagration happened within 20.68 mm behind the plate,the initial impact velocity and plate thickness are the crucial factors that dominate the self-distributed multipeak overpressure effect.Three formation patterns of multipeak overpressure are proposed.展开更多
Intelligent refractory materials represent a new generation of high-temperature functional materials that significantly enhance the service performance of traditional refractories in extreme environments through integ...Intelligent refractory materials represent a new generation of high-temperature functional materials that significantly enhance the service performance of traditional refractories in extreme environments through integrated sensing,response,and adaptive mechanisms.A comprehensive overview of intelligent refractory materials was provided,focusing on their classification,preparation techniques,and industrial applications.Firstly,the categories and design principles of intelligent refractory materials are introduced,including self-healing,self-regulating,and self-diagnosing types,which enhance durability and performance under extreme conditions.Subsequently,advanced preparation technologies are discussed,such as 3D printing for complex geometries,nanocomposite engineering for improved mechanical and thermal properties,gradient design for optimized thermal stress resistance and information technology including machine learning,health monitoring,digital twin.Finally,the industrial applications of these materials are highlighted,particularly in steel metallurgy,building materials industry,and energy.It aims to bridge the gap between research advancements and practical implementation,offering insights into future trends in intelligent refractory material development.展开更多
Responsive colorimetric materials exhibit significant potential for application in fields such as smart food packaging and wound monitoring.The functional integration of pH-indicators with material carriers enables br...Responsive colorimetric materials exhibit significant potential for application in fields such as smart food packaging and wound monitoring.The functional integration of pH-indicators with material carriers enables breakthrough applications in nontraditional domains.In this study,we developed a novel material covalently grafted with a pH indicator that exhibited naked-eye pH-responsive color shifts.The covalent grafting of pH-responsive bromothymol blue onto carboxymethyl cellulose(CMC)was confirmed using advanced characterization techniques,including Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.The pH-sensitive chromophore was covalently immobilized onto the CMC matrix through esterification,thereby establishing firm chemical conjugation.Moreover,a superior color-changing performance was achieved within several minutes in response to different pH values.The reusability and stability of this material offer distinct advantages over single-use pH test strips.pH-responsive colorimetric materials hold promise for efficient,noninvasive monitoring in intelligent packaging(food freshness),medical diagnostics(wound status,infections),biosensing,and environmental applications.展开更多
The mechanical performance of exceedingly soft materials such as Ag is significantly influenced by various working conditions.Therefore,this study systematically investigates the effects of crack geometry,substrate cr...The mechanical performance of exceedingly soft materials such as Ag is significantly influenced by various working conditions.Therefore,this study systematically investigates the effects of crack geometry,substrate crystal orientation,and indenter shape on crack propagation.The mechanical response of Ag is analyzed using the quasi-continuum(QC)method.A pre-crack with a predefined depth and angle was introduced to initiate fracture behavior.The results show that when the pre-crack height is 50 A,the crack propagates rapidly as the imprint depth increases from0 to 7 A,grows steadily up to 15 A,and then accelerates sharply between 15 and 20 A.For other pre-crack heights,crack propagation occurs at a relatively faster rate.Substrates with[100],[010],and[001]crystal orientations promote crack extension,while the onset of plastic deformation(referred to as the yield point in this study)and the fracture strength both increase with increasing pre-crack height.The yield point,fracture strength,and stress intensity factors are highly sensitive to the pre-crack height.When the pre-crack angle is 90○,the fracture strength reaches its maximum of 0.2%higher than that of the uncracked sample-whereas at 0○,it reaches its minimum,still 53.8%higher than that of the uncracked sample.The sample model is conducted using AutoCAD software.The optimized quasicontinuum(QC)method is used to investigate the effects of different crack geometries,substrate crystal orientations,and indenter shapes on the crack extension of Ag material.Baskes and Dow(FBD)potential is borrowed to describe the interaction forces between Ag-Ag,Ni-Ag,and Ni-Ni.展开更多
Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenizatio...Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenization methods based on the classical elasticity theory struggle to accurately describe the non-classical mechanical behaviors of lattice materials,especially when dealing with complex unit-cell geometries featured by non-symmetric configurations or non-single central node connections.In response to this limitation,this study establishes a generalized homogenization model based on the micropolar theory framework,employing Hill's boundary conditions to precisely predict the equivalent moduli of complex lattice materials.By introducing the independent rotational degree of freedom(DOF)characteristic of the micropolar theory,the proposed model successfully overcomes the limitation of conventional methods in accurately describing the asymmetric deformation and scale effects.We initially calculate the constitutive relations of two-dimensional(2D)cross-shaped multi-node chiral lattices and subsequently extend the method to three-dimensional(3D)lattices,successfully predicting the mechanical properties of both traditional and eccentric body-centered cubic(BCC)lattices.The theoretical model is validated through the finite element numerical verification which shows excellent consistency with the theoretical predictions.A further parametric study investigates the influence of geometric parameters,revealing the underlying size-effect mechanism.This paper provides a reliable theoretical tool for the design and property optimization of complex lattice materials.展开更多
Coal cinder is an abundant byproduct of the extensive consumption of coal in industrial production and daily life.Making full use of the cinder is conducive to a low-carbon economy.In this study,inspired by the burnin...Coal cinder is an abundant byproduct of the extensive consumption of coal in industrial production and daily life.Making full use of the cinder is conducive to a low-carbon economy.In this study,inspired by the burning of coal,a new method for constructing a silica-based composite porous material(SiO_(2)-CPM)was developed by combusting a siloxane-modified anthracite coal gel(CSiO_(2) gel).During this process,the combustion product was directly converted into a porous material,and the calorific value of the coal remained nearly unchanged(~98%of the original calorific value was retained),demonstrating the viability of this method for energy-efficient applications.The SiO_(2)-CPM exhibited an ultra-low thermal conductivity(0.036 W/(m·K)at room temperature),outperforming conventional insulation materials(e.g.,cotton~0.05 W/(m·K)).Additionally,it showed enhanced mechanical strength(fracture stress of 41.8 kPa)compared to the powder state of the coal cinder.Experimental results indicate that the amount of siloxane,structure-directing agent,and an acidic environment were critical for mechanical enhancement.The SiO_(2)-CPM showed good dimensional stability against thermal expansion and exhibited excellent thermal insulation and fire resistance even at 900℃.Meanwhile,the SiO_(2)-CPM with complex geometry could be easily fabricated using this method owing to the excellent shaping ability of the CSiO_(2) gel.Compared to conventional methods such as sol-gel synthesis or freeze-drying,this approach for fabricating SiO_(2)-CPM is simpler and cost-effective and allows the direct utilization of coal cinder post-combustion.展开更多
We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based im...We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.展开更多
Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade...Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.展开更多
Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular....Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular.However,due to its manufacturing process and thermal nature,internal voids and pores are formed within the thermoplastic materials being fabricated,potentially leading to a decrease in mechanical properties.This paper discussed the effect of printing parameters on the porosity and the mechanical properties of the 3D printed polylactic acid(PLA)through micro-computed tomography(microCT),computational image analysis,and Charpy impact testing.The results for both tests were correlated to investigate the relationship between porosity and Charpy impact strength.PLA samples of 1 cm^(3)×1 cm^(3)×1 cm^(3) were 3D printed at printing temperatures of 180℃,200℃,220℃,and 240℃,and at printing speeds of 50,80,and 110 mm/s,while porosity was measured frommicroCT-reconstructed data.Additionally,impact strength was assessed using a notched Charpy impact tester following ASTMD6610-18.In general,results show that higher printing temperatures and lower printing speeds reduced pore size by improving material flow and fusion,while also increasing impact strength due to better thermal bonding and interlayer adhesion.A maximum 36.8% reduction in mean pore size and a 114% improvement in impact strength were observed at 110 mm/s and 220℃.Conversely,increasing printing speed led to lowerCharpy impact strength.Optimal impact behavior andminimal voids were observed at a printing temperature of 220℃ and a printing speed of 50 mm/s.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
The tire acoustic cavity resonance(TACR)noise is a significant source of the structure-borne noise inside a vehicle in the low-frequency range.This paper studies the noise dissipation effect of porous materials in red...The tire acoustic cavity resonance(TACR)noise is a significant source of the structure-borne noise inside a vehicle in the low-frequency range.This paper studies the noise dissipation effect of porous materials in reducing the TACR noise,an attempt to clarify the acoustic reduction mechanism and improve the accompanying vehicle interior noise level.A numerical model of a simplified tire cavity with rigid boundaries and acoustic excitation is established and further validated by the experiment.The effects of porous parameters on TACR frequency and sound pressure are then investigated and compared.The result reveals that the most influential material parameters are the porosity and material volume.It is also shown that the effectiveness of porous material in the mitigation of noise originates from the curliness of the material,which results in much larger acoustic impedance near the excitation position.Therefore,the sound absorption performance of the cavity attached with porous material proves to be excellent compared to that of the porous material itself.For further studying the damping effects of structural coupling,the flexible boundary of the tire tread is introduced.The results show that the porosity,material volume and structural loss factor of the tread all play important roles in reducing TACR noise.展开更多
This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The vall...This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The valley medium is assumed to be isotropic,linear elastic and nonhomogeneous,such that the shear modulus of the valley has spatial dependency.The valley is surrounded by an isotropic,linear elastic and homogeneous half-space.A strike-slip fault is located at the intersection between the valley and the half-space.The problem is solved analytically by using finite Fourier transform.Displacement functions are obtained in closed-form,in terms of power series and hypergeometric function series.Unknown coefficients of these series are determined from the boundary conditions,leading to an analytical exact solution.Numerical results indicate that the nonhomogeneity of the alluvial valley material has a limited impact on permanent surface dislocations unless there is a significant variation in the material properties within the functionally graded zone.In many cases,approximating the nonhomogeneous alluvial valley as a homogeneous medium is suitable.展开更多
The outstanding performance of O3-type NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)(NFM111)at both high and low temperatures coupled with its impressive specific capacity makes it an excellent cathode material for sodium-ion batte...The outstanding performance of O3-type NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)(NFM111)at both high and low temperatures coupled with its impressive specific capacity makes it an excellent cathode material for sodium-ion batteries.However,its poor cycling,owing to highpressure phase transitions,is one of its disadvantages.In this study,Cu/Ti was introduced into NFM111 cathode material using a solidphase method.Through both theoretically and experimentally,this study found that Cu doping provides a higher redox potential in NFM111,improving its reversible capacity and charge compensation process.The introduction of Ti would enhance the cycling stability of the material,smooth its charge and discharge curves,and suppress its high-voltage phase transitions.Accordingly,the NaNi_(0.27)Fe_(0.28)Mn_(0.33)Cu_(0.05)Ti_(0.06)O_(2)sample used in the study exhibited a remarkable rate performance of 142.97 mAh·g^(-1)at 0.1 C(2.0-4.2 V)and an excellent capacity retention of 72.81%after 300 cycles at 1C(1C=150 mA·g^(-1)).展开更多
This supplemental material contains three sections:(Ⅰ)Derivation of the Floquet lattice Hamiltonian;(Ⅱ)Surface states of the Floquet lattice Hamiltonian;(Ⅲ)Evolution of Floquet Weyl points and Fermi arcs with the i...This supplemental material contains three sections:(Ⅰ)Derivation of the Floquet lattice Hamiltonian;(Ⅱ)Surface states of the Floquet lattice Hamiltonian;(Ⅲ)Evolution of Floquet Weyl points and Fermi arcs with the increase of light amplitude;(Ⅳ)Formalism for light-induced anomalous Hall effects.展开更多
Recent years have witnessed the significant breakthrough in the field of new materials discovery brought about by the artificial intelligence(AI).AI has successfully been applied for predicting the formability,reveali...Recent years have witnessed the significant breakthrough in the field of new materials discovery brought about by the artificial intelligence(AI).AI has successfully been applied for predicting the formability,revealing the properties,and guiding the experimental synthesis of materials.Rapid progress has been made in the integration of increasing database and improved computing power.Though some reviews present the development from their unique aspects,reviews from the view of how AI empowered both discovery of new materials and cognition of existing materials that covers the completed contents with two synergistical aspects are few.Here,the newest development is systematically reviewed in the field of AI empowered materials,reflecting advanced design of the intelligent systems for discovery,synthesis,prediction and validation of materials.First,background and mechanisms are briefed,after which the design for the AI systems with data,machine learning and automated laboratory included is illustrated.Next,strategies are summarized to obtain the AI systems for materials with improved performance which comprehensively cover the aspects from the in-depth cognizance of existing material and the rapid discovery of new materials,and then,the design thought for future AI systems in material science is pointed out.Finally,some perspectives are put forward.展开更多
We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total n...We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total number of periodic layers,the total thickness of graded materials and loading velocity on the integration layer thickness and behavior of pressure-strain rate were systematically investigated.The results reveal that,by adjusting the total number of periodically modulated layers,the total thickness of graded materials and loading velocity the pressure amplitudes of the reflected compressive and rarefaction waves at different interfaces of Ti/Pt periodically modulated graded materials can be precisely controlled.Furthermore,empirical structural design criteria for Ti/Pt periodically modulated graded materials are established.The thickness ratio variation between adjacent Ti/Pt layers in the periodic structure must exceed 0.32.After the collaborative design of the integration layer,Ti/Pt periodically modulated graded materials can achieve a controllable loading function with pressures ranging from 1.4 to 144 GPa and strain rates from 3.8×10^(4) to 1.7×10^(7) s^(–1).The outcomes of this research provide a theoretical and simulation basis for the optimized design of periodically modulated graded materials to be utilized in ramp compression experiments.展开更多
Biomedical applications necessitate natural or synthetic biomaterials that can maintain,improve,or even replace damaged tissue or a biological function,facilitating healing for people who have suffered from an injury ...Biomedical applications necessitate natural or synthetic biomaterials that can maintain,improve,or even replace damaged tissue or a biological function,facilitating healing for people who have suffered from an injury or disease.Metallic biomaterials show superior mechanical properties with greater service life than other materials.Biodegradable materials can avoid the inevitable second operation of removing the implant in the case of temporary implantation,reducing the risk of infections,medical complications,healing time,and cost.Magnesium(Mg),zinc(Zn),iron(Fe),and their alloys are potential biodegradable metallic materials.The characteristics of biodegradable metallic materials are variable and depend on many factors,such as alloying elements,microstructure,existing phases,and thermomechanical treatment.The current review emphasizes the impact of alloying element addition on the characteristics of metallic biodegradable materials,with particular attention to the relationships between alloying elements,microstructure,mechanical performance,corrosion,and biocompatibility.Mg alloys show good mechanical and corrosion properties with excellent biocompatibility.Using biocompatible alloying elements can improve Mg alloy mechanical and corrosion properties without af-fecting their biocompatibility.However,critical limitations are still maintained,like rapid degradation and gas bubble formation.Zn alloys could overcome the limitations of Mg alloys with appropriate degradation rates,ease of casting and processing,and good biocompatibility.Alloying,particularly with Mg,Li,and Cu,combined with thermomechanical treatment,can significantly affect the microstructure and mechanical performance of Zn alloys and overcome the problem of unsuitable mechanical properties.Fe alloys have excellent mechanical performance,formability,and biocompatibility with a low degradation rate.Applying surface treatment,using novel structures,alloying with the appropriate amount of alloying elements,and using advanced manufacturing techniques may present a way to solve the problems associated with biodegradable metallic materials,which could open new horizons and increase their applicability in biomedical applications.展开更多
Photocatalytic nitrogen fixation (PNF) is a promising alternative to the Haber-Bosch process.It achieves green ammonia production by utilizing solar energy for nitrogen fixation under mild conditions.While nanoscale p...Photocatalytic nitrogen fixation (PNF) is a promising alternative to the Haber-Bosch process.It achieves green ammonia production by utilizing solar energy for nitrogen fixation under mild conditions.While nanoscale photocatalysts offer enhanced performance due to their high surface area and abundant active sites,their small size makes them difficult to recover and prone to agglomeration.These bottlenecks severely limit industrial application.A promising solution is to immobilize the catalysts onto support surfaces.This paper provides a systematic review of recent advances in the design of immobilized photocatalysts for ammonia synthesis.It begins by outlining the key benefits of immobilization strategies,particularly in improving catalyst stability,recyclability,and overall photocatalytic performance.The working mechanisms and features of various immobilization techniques are then categorized and explained,covering physical adsorption/deposition,chemical bonding,in situ growth,and hybrid physico-chemical methods.Supported materials and common substrate types are also summarized.Furthermore,the widely used configurations of photoreactors suitable for immobilized systems are introduced.Finally,the review identifies current research limitations and challenges,and offers perspectives on future developments in the field of immobilized photocatalysis.展开更多
基金supported by the National Science Foundation for Distinguished Young Scholars of China(No.52325506)the Fundamental Research Funds for the Central Universities(No.DUT22LAB501)。
文摘Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with multidirectional structure during UAG is challenging,impeding the progress and improvement of the UAG process.This work examined the impact of ultrasonic vibration on the dynamic mechanical characteristics during processing.Additionally,we experimentally elucidated the material removal mechanism of CMCs during the scratching process under the influence of vertical vibration.The results indicate that the introduction of ultrasonic vibration causes a strain rate effect,resulting in a modification of the material removal mechanism,subsequently impacting the processing quality.Ultrasonic vibration increases the dynamic strength and brittleness of the fibers in CMCs,leading to more cracks at fracture,which changes from the original bending fracture to shear fracture.In addition,ultrasonic vibration can effectively inhibit the impact of scratching depth and anisotropy on the removal mechanism of CMCs,resulting in a more uniform surface of CMCs after processing.
基金supported by the National Natural Science Foundation of China(52305388,BE0200030)Shanghai Pujiang Program(22PJ1407600)+1 种基金SJTU Explore X programShanghai Jiao Tong University Initiative Scientific Research Program(WH220402021)。
文摘Moisture electricity generation(MEG)has emerged as a sustainable and versatile energy-harvesting technology capable of converting ubiquitous environmental moisture into electrical energy,which holds great promise for renewable energy and constructing self-powered electronics.In this review,we begin by outlining the fundamental mechanisms—ion diffusion,electric double layer formation,and streaming potential—that govern charge transport for MEG in moist environments.A comprehensive survey of material innovations follows,highlighting breakthroughs in carbon-based materials,conductive polymers,hydrogels,and bio-inspired systems that enhance MEG performance,scalability,and biocompatibility.We then explore a range of device architectures,from planar and layered systems to flexible,miniaturized,and textile-integrated designs,engineered for both energy conversion and sensor integration.Key challenges are analyzed,along with strategies for overcoming them.We conclude with a forward-looking perspective on future directions,including hybrid energy systems,AI-assisted material design,and real-world deployment.This review presents a timely and comprehensive overview of MEG technologies and their trajectory toward practical and sustainable energy solutions.
基金the support received from the National Natural Science Foundation of China(Grant No.12302460)the State Key Laboratory of Explosion Science and Safety Protection(Grant No.YBKT24-02)。
文摘The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during penetrating multi-layered plates,and generating a multipeak overpressure behind the plates.Here analytical models of RMFS self-distributed energy release and equivalent deflagration are developed.The multipeak overpressure formation model based on the single deflagration overpressure expression was promoted.The impact tests of RMFS on multi-layered plates at 584 m/s,616 m/s,and819 m/s were performed to validate the analytical model.Further,the influence of a single overpressure peak and time intervals versus impact velocity is discussed.The analysis results indicate that the deflagration happened within 20.68 mm behind the plate,the initial impact velocity and plate thickness are the crucial factors that dominate the self-distributed multipeak overpressure effect.Three formation patterns of multipeak overpressure are proposed.
基金supported by the Natural Science Foundation of Shaanxi Province(No.2023-JC-QN-0615)the National Natural Science Foundation of China(Nos.52272027 and 52372034).
文摘Intelligent refractory materials represent a new generation of high-temperature functional materials that significantly enhance the service performance of traditional refractories in extreme environments through integrated sensing,response,and adaptive mechanisms.A comprehensive overview of intelligent refractory materials was provided,focusing on their classification,preparation techniques,and industrial applications.Firstly,the categories and design principles of intelligent refractory materials are introduced,including self-healing,self-regulating,and self-diagnosing types,which enhance durability and performance under extreme conditions.Subsequently,advanced preparation technologies are discussed,such as 3D printing for complex geometries,nanocomposite engineering for improved mechanical and thermal properties,gradient design for optimized thermal stress resistance and information technology including machine learning,health monitoring,digital twin.Finally,the industrial applications of these materials are highlighted,particularly in steel metallurgy,building materials industry,and energy.It aims to bridge the gap between research advancements and practical implementation,offering insights into future trends in intelligent refractory material development.
基金financially supported by the National Natural Science Foundation of China(No.52303209)the“Lingyan”Program of Zhejiang Province(No.2024C03076)+1 种基金Zhejiang University K.P.Chao’s High Technology Development Foundationthe generous support provided by the joint research fund from the Shaoxing Institute of Zhejiang University and Shaoxing Maternity and Child Health Care Hospital。
文摘Responsive colorimetric materials exhibit significant potential for application in fields such as smart food packaging and wound monitoring.The functional integration of pH-indicators with material carriers enables breakthrough applications in nontraditional domains.In this study,we developed a novel material covalently grafted with a pH indicator that exhibited naked-eye pH-responsive color shifts.The covalent grafting of pH-responsive bromothymol blue onto carboxymethyl cellulose(CMC)was confirmed using advanced characterization techniques,including Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.The pH-sensitive chromophore was covalently immobilized onto the CMC matrix through esterification,thereby establishing firm chemical conjugation.Moreover,a superior color-changing performance was achieved within several minutes in response to different pH values.The reusability and stability of this material offer distinct advantages over single-use pH test strips.pH-responsive colorimetric materials hold promise for efficient,noninvasive monitoring in intelligent packaging(food freshness),medical diagnostics(wound status,infections),biosensing,and environmental applications.
基金by the Industry–Academia Cooperation Project No.113A00262(Te-Hua Fang).URLs to the sponsor websites are available at:https://www.nstc.gov.tw.
文摘The mechanical performance of exceedingly soft materials such as Ag is significantly influenced by various working conditions.Therefore,this study systematically investigates the effects of crack geometry,substrate crystal orientation,and indenter shape on crack propagation.The mechanical response of Ag is analyzed using the quasi-continuum(QC)method.A pre-crack with a predefined depth and angle was introduced to initiate fracture behavior.The results show that when the pre-crack height is 50 A,the crack propagates rapidly as the imprint depth increases from0 to 7 A,grows steadily up to 15 A,and then accelerates sharply between 15 and 20 A.For other pre-crack heights,crack propagation occurs at a relatively faster rate.Substrates with[100],[010],and[001]crystal orientations promote crack extension,while the onset of plastic deformation(referred to as the yield point in this study)and the fracture strength both increase with increasing pre-crack height.The yield point,fracture strength,and stress intensity factors are highly sensitive to the pre-crack height.When the pre-crack angle is 90○,the fracture strength reaches its maximum of 0.2%higher than that of the uncracked sample-whereas at 0○,it reaches its minimum,still 53.8%higher than that of the uncracked sample.The sample model is conducted using AutoCAD software.The optimized quasicontinuum(QC)method is used to investigate the effects of different crack geometries,substrate crystal orientations,and indenter shapes on the crack extension of Ag material.Baskes and Dow(FBD)potential is borrowed to describe the interaction forces between Ag-Ag,Ni-Ag,and Ni-Ni.
基金Project supported by the National Natural Science Foundation of China(No.12472077)the supports from Shanghai Gaofeng Project for University Academic Program Development,Fundamental Research Funds for the Central Universities(No.22120240353).
文摘Lattice materials have demonstrated promising potential in engineering applications owing to their exceptional lightweight,high specific strength,and tunable mechanical properties.However,the traditional homogenization methods based on the classical elasticity theory struggle to accurately describe the non-classical mechanical behaviors of lattice materials,especially when dealing with complex unit-cell geometries featured by non-symmetric configurations or non-single central node connections.In response to this limitation,this study establishes a generalized homogenization model based on the micropolar theory framework,employing Hill's boundary conditions to precisely predict the equivalent moduli of complex lattice materials.By introducing the independent rotational degree of freedom(DOF)characteristic of the micropolar theory,the proposed model successfully overcomes the limitation of conventional methods in accurately describing the asymmetric deformation and scale effects.We initially calculate the constitutive relations of two-dimensional(2D)cross-shaped multi-node chiral lattices and subsequently extend the method to three-dimensional(3D)lattices,successfully predicting the mechanical properties of both traditional and eccentric body-centered cubic(BCC)lattices.The theoretical model is validated through the finite element numerical verification which shows excellent consistency with the theoretical predictions.A further parametric study investigates the influence of geometric parameters,revealing the underlying size-effect mechanism.This paper provides a reliable theoretical tool for the design and property optimization of complex lattice materials.
基金supported by the National Natural Science Foundation of China(No.52573220)the National Key R&D Program of China(No.2023YFC3404201)+1 种基金the Fundamental Research Funds for the Central Universities(No.FRF-IDRY-GD24-005)the State Key Laboratory of Solid Waste Reuse for Building Materials(No.SWR-2022-009).
文摘Coal cinder is an abundant byproduct of the extensive consumption of coal in industrial production and daily life.Making full use of the cinder is conducive to a low-carbon economy.In this study,inspired by the burning of coal,a new method for constructing a silica-based composite porous material(SiO_(2)-CPM)was developed by combusting a siloxane-modified anthracite coal gel(CSiO_(2) gel).During this process,the combustion product was directly converted into a porous material,and the calorific value of the coal remained nearly unchanged(~98%of the original calorific value was retained),demonstrating the viability of this method for energy-efficient applications.The SiO_(2)-CPM exhibited an ultra-low thermal conductivity(0.036 W/(m·K)at room temperature),outperforming conventional insulation materials(e.g.,cotton~0.05 W/(m·K)).Additionally,it showed enhanced mechanical strength(fracture stress of 41.8 kPa)compared to the powder state of the coal cinder.Experimental results indicate that the amount of siloxane,structure-directing agent,and an acidic environment were critical for mechanical enhancement.The SiO_(2)-CPM showed good dimensional stability against thermal expansion and exhibited excellent thermal insulation and fire resistance even at 900℃.Meanwhile,the SiO_(2)-CPM with complex geometry could be easily fabricated using this method owing to the excellent shaping ability of the CSiO_(2) gel.Compared to conventional methods such as sol-gel synthesis or freeze-drying,this approach for fabricating SiO_(2)-CPM is simpler and cost-effective and allows the direct utilization of coal cinder post-combustion.
基金partially supported by the Center for Advanced Systems Understanding(CASUS)financed by Germany’s Federal Ministry of Education and Research(BMBF)+2 种基金the Saxon State Government out of the State Budget approved by the Saxon State Parliamentfunding from the European Union’s Just Transition Fund(JTF)within the project Röntgenlaser-Optimierung der Laserfusion(ROLF),Contract No.5086999001co-financed by the Saxon State Government out of the State Budget approved by the Saxon State Parliament.
文摘We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.
文摘Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.
文摘Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular.However,due to its manufacturing process and thermal nature,internal voids and pores are formed within the thermoplastic materials being fabricated,potentially leading to a decrease in mechanical properties.This paper discussed the effect of printing parameters on the porosity and the mechanical properties of the 3D printed polylactic acid(PLA)through micro-computed tomography(microCT),computational image analysis,and Charpy impact testing.The results for both tests were correlated to investigate the relationship between porosity and Charpy impact strength.PLA samples of 1 cm^(3)×1 cm^(3)×1 cm^(3) were 3D printed at printing temperatures of 180℃,200℃,220℃,and 240℃,and at printing speeds of 50,80,and 110 mm/s,while porosity was measured frommicroCT-reconstructed data.Additionally,impact strength was assessed using a notched Charpy impact tester following ASTMD6610-18.In general,results show that higher printing temperatures and lower printing speeds reduced pore size by improving material flow and fusion,while also increasing impact strength due to better thermal bonding and interlayer adhesion.A maximum 36.8% reduction in mean pore size and a 114% improvement in impact strength were observed at 110 mm/s and 220℃.Conversely,increasing printing speed led to lowerCharpy impact strength.Optimal impact behavior andminimal voids were observed at a printing temperature of 220℃ and a printing speed of 50 mm/s.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金Supported by National Natural Science Foundation of China(Grant No.51675021).
文摘The tire acoustic cavity resonance(TACR)noise is a significant source of the structure-borne noise inside a vehicle in the low-frequency range.This paper studies the noise dissipation effect of porous materials in reducing the TACR noise,an attempt to clarify the acoustic reduction mechanism and improve the accompanying vehicle interior noise level.A numerical model of a simplified tire cavity with rigid boundaries and acoustic excitation is established and further validated by the experiment.The effects of porous parameters on TACR frequency and sound pressure are then investigated and compared.The result reveals that the most influential material parameters are the porosity and material volume.It is also shown that the effectiveness of porous material in the mitigation of noise originates from the curliness of the material,which results in much larger acoustic impedance near the excitation position.Therefore,the sound absorption performance of the cavity attached with porous material proves to be excellent compared to that of the porous material itself.For further studying the damping effects of structural coupling,the flexible boundary of the tire tread is introduced.The results show that the porosity,material volume and structural loss factor of the tread all play important roles in reducing TACR noise.
文摘This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The valley medium is assumed to be isotropic,linear elastic and nonhomogeneous,such that the shear modulus of the valley has spatial dependency.The valley is surrounded by an isotropic,linear elastic and homogeneous half-space.A strike-slip fault is located at the intersection between the valley and the half-space.The problem is solved analytically by using finite Fourier transform.Displacement functions are obtained in closed-form,in terms of power series and hypergeometric function series.Unknown coefficients of these series are determined from the boundary conditions,leading to an analytical exact solution.Numerical results indicate that the nonhomogeneity of the alluvial valley material has a limited impact on permanent surface dislocations unless there is a significant variation in the material properties within the functionally graded zone.In many cases,approximating the nonhomogeneous alluvial valley as a homogeneous medium is suitable.
基金supported by the Low-Cost Long-Life Batteries program,China(No.WL-24-08-01)the National Natural Science Foundation of China(No.22279007)。
文摘The outstanding performance of O3-type NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)(NFM111)at both high and low temperatures coupled with its impressive specific capacity makes it an excellent cathode material for sodium-ion batteries.However,its poor cycling,owing to highpressure phase transitions,is one of its disadvantages.In this study,Cu/Ti was introduced into NFM111 cathode material using a solidphase method.Through both theoretically and experimentally,this study found that Cu doping provides a higher redox potential in NFM111,improving its reversible capacity and charge compensation process.The introduction of Ti would enhance the cycling stability of the material,smooth its charge and discharge curves,and suppress its high-voltage phase transitions.Accordingly,the NaNi_(0.27)Fe_(0.28)Mn_(0.33)Cu_(0.05)Ti_(0.06)O_(2)sample used in the study exhibited a remarkable rate performance of 142.97 mAh·g^(-1)at 0.1 C(2.0-4.2 V)and an excellent capacity retention of 72.81%after 300 cycles at 1C(1C=150 mA·g^(-1)).
文摘This supplemental material contains three sections:(Ⅰ)Derivation of the Floquet lattice Hamiltonian;(Ⅱ)Surface states of the Floquet lattice Hamiltonian;(Ⅲ)Evolution of Floquet Weyl points and Fermi arcs with the increase of light amplitude;(Ⅳ)Formalism for light-induced anomalous Hall effects.
基金supported by the Hong Kong Polytechnic University(Project No.4-ZZW1,4-YWER,97D9,4-W443)。
文摘Recent years have witnessed the significant breakthrough in the field of new materials discovery brought about by the artificial intelligence(AI).AI has successfully been applied for predicting the formability,revealing the properties,and guiding the experimental synthesis of materials.Rapid progress has been made in the integration of increasing database and improved computing power.Though some reviews present the development from their unique aspects,reviews from the view of how AI empowered both discovery of new materials and cognition of existing materials that covers the completed contents with two synergistical aspects are few.Here,the newest development is systematically reviewed in the field of AI empowered materials,reflecting advanced design of the intelligent systems for discovery,synthesis,prediction and validation of materials.First,background and mechanisms are briefed,after which the design for the AI systems with data,machine learning and automated laboratory included is illustrated.Next,strategies are summarized to obtain the AI systems for materials with improved performance which comprehensively cover the aspects from the in-depth cognizance of existing material and the rapid discovery of new materials,and then,the design thought for future AI systems in material science is pointed out.Finally,some perspectives are put forward.
基金Funded by the Guangdong Major Project of Basic and Applied Basic Research(No.2021B0301030001)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(No.JCKYS2022212004)。
文摘We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total number of periodic layers,the total thickness of graded materials and loading velocity on the integration layer thickness and behavior of pressure-strain rate were systematically investigated.The results reveal that,by adjusting the total number of periodically modulated layers,the total thickness of graded materials and loading velocity the pressure amplitudes of the reflected compressive and rarefaction waves at different interfaces of Ti/Pt periodically modulated graded materials can be precisely controlled.Furthermore,empirical structural design criteria for Ti/Pt periodically modulated graded materials are established.The thickness ratio variation between adjacent Ti/Pt layers in the periodic structure must exceed 0.32.After the collaborative design of the integration layer,Ti/Pt periodically modulated graded materials can achieve a controllable loading function with pressures ranging from 1.4 to 144 GPa and strain rates from 3.8×10^(4) to 1.7×10^(7) s^(–1).The outcomes of this research provide a theoretical and simulation basis for the optimized design of periodically modulated graded materials to be utilized in ramp compression experiments.
文摘Biomedical applications necessitate natural or synthetic biomaterials that can maintain,improve,or even replace damaged tissue or a biological function,facilitating healing for people who have suffered from an injury or disease.Metallic biomaterials show superior mechanical properties with greater service life than other materials.Biodegradable materials can avoid the inevitable second operation of removing the implant in the case of temporary implantation,reducing the risk of infections,medical complications,healing time,and cost.Magnesium(Mg),zinc(Zn),iron(Fe),and their alloys are potential biodegradable metallic materials.The characteristics of biodegradable metallic materials are variable and depend on many factors,such as alloying elements,microstructure,existing phases,and thermomechanical treatment.The current review emphasizes the impact of alloying element addition on the characteristics of metallic biodegradable materials,with particular attention to the relationships between alloying elements,microstructure,mechanical performance,corrosion,and biocompatibility.Mg alloys show good mechanical and corrosion properties with excellent biocompatibility.Using biocompatible alloying elements can improve Mg alloy mechanical and corrosion properties without af-fecting their biocompatibility.However,critical limitations are still maintained,like rapid degradation and gas bubble formation.Zn alloys could overcome the limitations of Mg alloys with appropriate degradation rates,ease of casting and processing,and good biocompatibility.Alloying,particularly with Mg,Li,and Cu,combined with thermomechanical treatment,can significantly affect the microstructure and mechanical performance of Zn alloys and overcome the problem of unsuitable mechanical properties.Fe alloys have excellent mechanical performance,formability,and biocompatibility with a low degradation rate.Applying surface treatment,using novel structures,alloying with the appropriate amount of alloying elements,and using advanced manufacturing techniques may present a way to solve the problems associated with biodegradable metallic materials,which could open new horizons and increase their applicability in biomedical applications.
基金support for carrying out this work was provided by the Doctoral Research Foundation of Weifang University(2024BS20)Science and Technology Development Plan Foundation of Weifang(2024GX017).
文摘Photocatalytic nitrogen fixation (PNF) is a promising alternative to the Haber-Bosch process.It achieves green ammonia production by utilizing solar energy for nitrogen fixation under mild conditions.While nanoscale photocatalysts offer enhanced performance due to their high surface area and abundant active sites,their small size makes them difficult to recover and prone to agglomeration.These bottlenecks severely limit industrial application.A promising solution is to immobilize the catalysts onto support surfaces.This paper provides a systematic review of recent advances in the design of immobilized photocatalysts for ammonia synthesis.It begins by outlining the key benefits of immobilization strategies,particularly in improving catalyst stability,recyclability,and overall photocatalytic performance.The working mechanisms and features of various immobilization techniques are then categorized and explained,covering physical adsorption/deposition,chemical bonding,in situ growth,and hybrid physico-chemical methods.Supported materials and common substrate types are also summarized.Furthermore,the widely used configurations of photoreactors suitable for immobilized systems are introduced.Finally,the review identifies current research limitations and challenges,and offers perspectives on future developments in the field of immobilized photocatalysis.
