The damper is capable of providing a continuously variable dampering force/torque in response to a magnetic field. It consists of an upside cap and an underside cap with a rotor located between them, the magneto-rheol...The damper is capable of providing a continuously variable dampering force/torque in response to a magnetic field. It consists of an upside cap and an underside cap with a rotor located between them, the magneto-rheological （MR） fluid is filled into the gaps between the rotor and the caps. When the viscosity of the MR fluid increases under the influence of the magnetic field, the movement of the rotor will be resisted. The output torque is made up of the torque caused by the magnetic field, the torque caused by the plastic viscosity of the MR fluid, and the torque caused by the coulomb friction. The viscous torque can be calculated by a simple method and the frictional torque can be obtained by experiments. The torque dependent on the magnetic field is obtained by electromagnetic finite dement analysis. Experiments are done on the damper prototype and the validity of the design is verified.展开更多
To improve the magneto-rheological (MR) properties of magneto-rheological fluids, self-made amorphous alloy particles, the composition of which was Fe76Cr2Mo2Sn2P10B2C2Si4, were used as the disperse phase to replace t...To improve the magneto-rheological (MR) properties of magneto-rheological fluids, self-made amorphous alloy particles, the composition of which was Fe76Cr2Mo2Sn2P10B2C2Si4, were used as the disperse phase to replace traditional carbonyl iron (CI) particles to prepare amorphous based magneto-rheological fluid (AMRF). Soft magnetic properties and densities of the amorphous particles and the CI particles were tested and compared. The results indicate the amorphous particles present a lower density but larger magnetization intensity and larger permeability at lower field levels. Properties of the AMRF with 20% particles in volume fraction were tested and compared with the CI based MR fluid (CMRF). The AMRF presents a saturation yield stress of 41 kPa at ~227 kA/m and a sedimentation ratio of 80%. The results indicate the magneto-rheological fluid based on amorphous micro-particles has better MR properties and sedimentation stability than that based on CI particles at lower field levels (0-200 kA/m).展开更多
The vehicle semi-active suspension with magneto-theological damper（MRD） has been a hot topic since this decade, in which the robust control synthesis considering load variation is a challenging task. In this paper, ...The vehicle semi-active suspension with magneto-theological damper（MRD） has been a hot topic since this decade, in which the robust control synthesis considering load variation is a challenging task. In this paper, a new semi-active controller based upon the inverse model and sliding mode control （SMC） strategies is proposed for the quarter-vehicle suspension with the magneto-rheological （MR） damper, wherein an ideal skyhook suspension is employed as the control reference model and the vehicle sprung mass is considered as an uncertain parameter. According to the asymptotical stability of SMC, the dynamic errors between the plant and reference systems are used to derive the control damping force acquired by the MR quarter-vehicle suspension system. The proposed modified Bouc-wen hysteretic force-velocity （F-v） model and its inverse model of MR damper, as well as the proposed continuous modulation （CM） filtering algorithm without phase shift are employed to convert the control damping force into the direct drive current of the MR damper. Moreover, the proposed semi-active sliding mode controller （SSMC）-based MR quarter-vehicle suspension is systematically evaluated through comparing the time and frequency domain responses of the sprung and unsprung mass displacement accelerations, suspension travel and the tire dynamic force with those of the passive quarter-vehicle suspension, under three kinds of varied amplitude harmonic, rounded pulse and real-road measured random excitations. The evaluation results illustrate that the proposed SSMC can greatly suppress the vehicle suspension vibration due to uncertainty of the load, and thus improve the ride comfort and handling safety. The study establishes a solid theoretical foundation as the universal control scheme for the adaptive semi-active control of the MR full-vehicle suspension decoupled into four MR quarter-vehicle sub-suspension systems.展开更多
The control study of vehicle semi-active suspension with magneto-rheological (MR) dampers has been attracted much attention internationally. However, a simple, real time and easy implementing semi-active controller ha...The control study of vehicle semi-active suspension with magneto-rheological (MR) dampers has been attracted much attention internationally. However, a simple, real time and easy implementing semi-active controller has not been proposed for the MR full-vehicle suspension system, and a systematic analysis method has not been established for evaluating the multi-objective suspension performances of MR full-vehicle vertical, pitch and roll motions. For this purpose, according to the 7-degree of freedom (DOF) fullvehicle dynamic system, a generalized 7-DOF MR and passive full-vehicle dynamic model is set up by employing the modified Boucwen hysteretic force-velocity (F-v) model of the MR damper. A semi-active controller is synthesized to realize independent control of the four MR quarter-vehicle sub-suspension systems in the full-vehicle, which is on the basis of the proposed modified skyhook damping scheme of MR quarter-vehicle sub-suspension system. The proposed controller can greatly simplify the controller design complexity of MR full-vehicle suspension and has merits of easy implementation in real application, wherein only absolute velocities of sprung and unsprung masses with reference to the road surface are required to measure in real time when the vehicle is moving. Furthermore, a systematic analysis method is established for evaluating the vertical, pitch and roll motion properties of both MR and passive full-vehicle suspensions in a more realistic road excitation manner, in which the harmonic, rounded pulse and real road measured random signals with delay time are employed as different road excitations inserted on the front and rear two wheels, by considering the distance between front and rear wheels in full-vehicle. The above excitations with different amplitudes are further employed as the road excitations inserted on left and right two wheels for evaluating the roll motion property. The multi-objective suspension performances of ride comfort and handling safety of the proposed MR full-vehicle suspension are thus thoroughly evaluated by comparing with those of the passive full-vehicle suspension. The results show that the proposed controller can ideally improve multiobjective suspension performances of the ride comfort and handling safety. The proposed harmonic, rounded pulse and real road measured random signals with delay time and asymmetric amplitudes are suitable for accurately analyzing the vertical, pitch and roll motion properties of MR full-vehicle suspension system in a more realistic road excitation manner. This research has important theoretical significance for improving application study on the intelligent MR semi-active suspension.展开更多
A modified skyhook-based semi-active controller is proposed for implementing an asymmetric control suspension design with symmetric magneto-rheological （MR） dampers. The controller is formulated in current form, whi...A modified skyhook-based semi-active controller is proposed for implementing an asymmetric control suspension design with symmetric magneto-rheological （MR） dampers. The controller is formulated in current form, which is modulated by integrating a continuous modulation and an asymmetric damping force generation algorithms, so as to effectively minimize switching and hysteretic effects from the MR-damper. The proposed controller is implemented with a quarter-vehicle MR-suspension model, and its relative response characteristics are thus evaluated in terms of defined performance measures under varying amplitude harmonic, rounded pulse and random excitations. The sensitivity of the semi-active suspension performance to variations in controller parameters is thoroughly evaluated. The results illustrate that the proposed skyhook-based asymmetric semi-active MR-suspension controller has superior robustness on the system parameter variations, and can achieve desirable multi-objective suspension performance.展开更多
The design and analysis of an intelligent vehicle suspension with MR dampers should address hybrid semi-active control goals, such as rejection of current-switching discontinuity and MR-damper hysteresis, asymmetric d...The design and analysis of an intelligent vehicle suspension with MR dampers should address hybrid semi-active control goals, such as rejection of current-switching discontinuity and MR-damper hysteresis, asymmetric damping from the symmetric MR-damper design, robustness on the vehicle operation parameter uncertainties and consideration of essential multiple suspension goals. Following the proposed skyhook-based asymmetric semi-active controller （Part I ） for achieving the above goals, herein, a set of suspension performance measures and three kinds of varying amplitude harmonic, rounded pulse and really measured random excitations are systematically defined, and the sensitivity of quarter-vehicle MR-suspension performance to variations in operating conditions is thoroughly analyzed. The results illustrate that the proposed skyhook-based semi-active MR-suspension in the asymmetric mode yields relatively superior dynamic responses to meet the multiple suspension performances of ride, rattle space, road-holding and dynamic tire force transmitted to the pavement, and has desirable robustness on variations in operating conditions of vehicle load and speed and the road roughness.展开更多
The above-knee intelligent bionic leg is very helpful to amputees in the area of rehabilitation medicine. This paper first introduces the functional demand of the above-knee prosthesis design. Then, the advantages of ...The above-knee intelligent bionic leg is very helpful to amputees in the area of rehabilitation medicine. This paper first introduces the functional demand of the above-knee prosthesis design. Then, the advantages of the four-bar link mechanism and the magneto-rheological （MR） damper are analyzed in detail. The fixed position of the MR damper is optimized and a virtual prototype of knee joint is given. In the end, the system model of kinematics, dynamics, and controller are given and a control experiment is performed. The control experiment indicates that the intelligent bionic leg with multi-axis knee is able to realize gait tracking of the amputee＇s healthy leg based on semi-active control of the MR damper.展开更多
A disc-type magneto-rheological fluid damper operating in shear mode is proposed in this paper,which is based on the special characteristics of the magneto-rheological (MR) fluid with rapid, reversible and dramatic ch...A disc-type magneto-rheological fluid damper operating in shear mode is proposed in this paper,which is based on the special characteristics of the magneto-rheological (MR) fluid with rapid, reversible and dramatic change in its rheological properties by the application of an external magnetic field. The magneticfield of the disc-type MR fluid damper is analysed by the finite element method ; the controllability of the disctype MR fluid damper on the dynamic behaviour of a rotor system ; and the effectiveness of the disc-type MR fluid damper in controlling the vibration of a rotor system, are studied in a flexible rotor system with an over-hung disc. It is shown that the magnetic flux density of the disc-type MR fluid damper in the working areas can significantly change with the applied current in the coil ; and that the dynamic behavior of the disc-type MR fluid damper can be varied by the application of an external magnetic field produced by a low voltage electromagnetic coil. The disc-type MR fluid damper can significantly change the dynamic characteristics of a rotor system, provided that the location of the disk-type MR fluid damper is carefully chosen. The disc-type MR fluid damper is a new actuator with good dynamic characteristics for rotating machinery.展开更多
Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject,the dynamical model for the shipboard aircraft arresting system is established,and the magneto-rheological(MR) damper is applied to pul...Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject,the dynamical model for the shipboard aircraft arresting system is established,and the magneto-rheological(MR) damper is applied to pulley shock absorbers for shipboard aircraft block system.Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined,we use a set of characteristic test of the MR damper,through the process of parameters identification,to establish the dynamical model for the MR damper based on the Bingham plastic model.Then,the fuzzy control rules are designed,the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition,the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable.It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.展开更多
Owing to their remarkable flexibility and favorable cost-effectiveness,industrial robots have found extensive applications to cutting of materials across sophisticated manufacturing fields.However,the structurally low...Owing to their remarkable flexibility and favorable cost-effectiveness,industrial robots have found extensive applications to cutting of materials across sophisticated manufacturing fields.However,the structurally low rigidity of these robots renders the tool tip prone to substantial oscillations during machining processes,significantly impacting product fabrication quality.The objective of this study is to present a novel methodology employing magnetorheological dampers for mitigating vibrations during robotic milling operations.Specifically,a new type of ring nested Magneto-Rheological Foam Damper(MRFD)working in the squeeze mode is developed.Firstly,the MRFD’s structure is designed considering the vibrational characteristics of robotic milling.Subsequently,a damping force model of the MRFD is derived.The feasibility of the MRFD’s structural design is validated by the finite element analyses,which is instrumental in comprehending the influence of structural parameters on the electromagnetic characteristics of the MRFD.Next,a prototype of the MRFD is fabricated selecting appropriate parameters.Finally,a series of excitation and milling experiments are conducted on a KUKA KR500 robot.The outcomes demonstrate a substantial reduction(37%-69%)in radial vibration amplitude at the tool tip during robotic milling,highlighting the effectiveness of the developed MRFD.This research endeavor has introduced a pioneering avenue and framework for vibration control in robotic milling,offering a novel paradigm for enhancing the precision of robotic machining.展开更多
Reciprocating friction characteristics of magneto-rheological （MR） fluid for aluminum under a magnetic field at different loads and oscillation frequencies were studied when MR fluids were worked in reciprocating mo...Reciprocating friction characteristics of magneto-rheological （MR） fluid for aluminum under a magnetic field at different loads and oscillation frequencies were studied when MR fluids were worked in reciprocating motions such as in dampers for automobiles, and surface polishing and other finishing. Thus, experiments were carried out to evaluate the reciprocating friction characteristic of MR fluid for aluminum. The obtained data from the tests are sorted in groups depending on various loads and oscillation frequencies, to analyze the relationship between test condition and travel cycle. Surfaces of specimens were compared by measuring the surface roughness and observing the surface images. The performance of reciprocating friction characteristics of MR fluid for aluminum is evaluated through analyzing the experiment results.展开更多
A hardware-in-the-loop （HIL） test and simulation platform is developed in the laboratory, so as to validate the performance characteristics of the proposed skyhook-based asymmetric semi-active controller in Part I, ...A hardware-in-the-loop （HIL） test and simulation platform is developed in the laboratory, so as to validate the performance characteristics of the proposed skyhook-based asymmetric semi-active controller in Part I, and examine the validity of the proposed MR-damper model in a system surrounding. A real-time monitor is designed to assess and monitor the responses of the quarter-vehicle model in the HIL platform, and to select the excitation, controller synthesis, and the output displays. A drive current circuit hardware employing PID feedback technique is developed to compensate for the time delays from the servo-controller and drive current circuit, in which a small resistance is integrated in the current amplifier circuit to provide the feedback signal. The experiments were performed to measure the responses of the quarter-vehicle MR-suspension models with fixed current and the proposed semi-active MR-damping variations, under harmonic, rounded pulse and random road excitations. The measured data were compared with the corresponding model results to examine the model and controller validity, and revealed generally good agreements in the model and tested results and very little sensitivity of the tested responses to variations in the sprung mass. The HIL test results validate the effectiveness of the proposed skyhook-based semi-active asymmetric controller and its high robustness against the vehicle load variations in view of the intelligent vehicle suspension design.展开更多
The aim of this study is to address the issues associated with traditional magnetorheological fluid(MRF)dampers,such as insufficient damping force after power failure and susceptibility to settlement.In order to achie...The aim of this study is to address the issues associated with traditional magnetorheological fluid(MRF)dampers,such as insufficient damping force after power failure and susceptibility to settlement.In order to achieve this,a bidirectional adjustable MRF damper was designed and developed.Magnetic field simulation analysis was conducted on the damper,along with simulation analysis on its dynamic characteristics.The dynamic characteristics were ultimately validated through experimental testing on the material testing machine,thereby corroborating the theoretical simulation results.Concurrently,this process generated valuable test data for subsequent implementation of the semi-active vibration control system.The simulation and test results demonstrate that the integrated permanent magnet effectively accomplishes bidirectional regulation.The magnetic induction intensity of the damping channel is 0.2 T in the absence of current,increases to 0.5 T when a maximum forward current of 4 A is applied,and becomes 0 T when a maximum reverse current of 3.8 A is applied.When the excitation amplitude is 8 mm and the frequency is 2 Hz,with the applied currents varying,the maximum damping force reaches 8 kN,while the minimum damping force measures at 511 N.Additionally,at zero current,the damping force stands at 2 kN,which aligns closely with simulation results.The present paper can serve as a valuable reference for the design and research of semi-active MRF dampers.展开更多
A semi-active magneto-rheological （MR） damper was experimentally investigated and compared to an original equipment manufacturer （OEM） damper for a passenger vehicle, by using a quarter car models. A full-scale tw...A semi-active magneto-rheological （MR） damper was experimentally investigated and compared to an original equipment manufacturer （OEM） damper for a passenger vehicle, by using a quarter car models. A full-scale two-degree-of-freedom quarter car experimental set-up was constructed to study the vehicle suspension. On-off skyhook controller and Fuzzy-Lyapunov skyhook controller （FLSC） were employed to control the input current for MR damper so as to achieve the desired damping force. Tests were done to evaluate the ability of MR damper for controlling vehicle vibration. Test results show that the semi-active MR vehicle suspension vibration control system is feasible. In comparison with OEM damper, on-off and FLSC controlled MR dampers can effectively reduce the acceleration of vehicle sprtmg mass by about 15% and 24%, respectively.展开更多
This paper puts forward the magneto-rheological fluid used in the fuze safe and arming system,realizing the time delay,ensuring the muzzle safety distance.The delay arming time model of a centrifugal MRF delay arming ...This paper puts forward the magneto-rheological fluid used in the fuze safe and arming system,realizing the time delay,ensuring the muzzle safety distance.The delay arming time model of a centrifugal MRF delay arming mechanism of fuze was established based on hydrodynamics formulae,reasonable hypothesis,speciality of MRF and fuze environmental parameters.The delay arming time formula was deduced.The model illustrates the relationship between delay arming time and projectile rotating speed,and that between diameter of discharge hole and viscosity of magneto-rheological fluid.According to the analysis,a new fuze delay arming device using MRF was proposed,which can be used in medium and large caliber fuze.展开更多
The research on the form and control method of impact load arresting buffer has been an active topic in the field of buffer arresting system(BAS).It becomes significant on reducing the weight of arresting system,impro...The research on the form and control method of impact load arresting buffer has been an active topic in the field of buffer arresting system(BAS).It becomes significant on reducing the weight of arresting system,improving the hindered efficiency,and guaranteeing the security of BAS.The hydraulic hindered device of impact load is currently used in BAS.There are some problems.For example,the system needs large power sources.However,once the power of active hydraulic control system is turned off,there arise unpredictable security risks.An arresting form of semi-active control based on magneto-rheological damper(MRD) is proposed,and the mechanical model of the BAS is established.Meanwhile,the state equation of impact load BAS is established according to the characteristics of impact load buffer arresting,and its sliding model buffer control is achieved.Due to the chattering characteristic of the output signal of sliding mode controller,the method to prevent chattering is designed based on short-term energy and zero-crossing rate detection.For the model and chattering suppression of sliding model buffer control algorithms,simulation results show that the proposed state equation and the arresting model are reasonable,and the design of semi-active control algorithm is effective.On the condition of the buffer control system requirement and the accuracy,the proposed algorithms effectively control the chattering of sliding mode control algorithms,and improve the security of the BAS.展开更多
Severe vibration of underground structures may be induced under blast loads. According to the characteristics of the explosion-induced ground shock wave, a new-type damper, inverse control magneto-rheological（MR） da...Severe vibration of underground structures may be induced under blast loads. According to the characteristics of the explosion-induced ground shock wave, a new-type damper, inverse control magneto-rheological（MR） damper was designed to control the vibration, The high-frequency performance test of the MR damper was carried out on the small shaking table. It is shown that the performance can be modeled by use of the modified Bouc-Wen model, and the Parameters of the model keep stable in the range of 15--50 Hz.展开更多
The aim of this work is to analyze and design a control system for vibration reduction in a rotor system using a shear mode magnetorheological fluid(MRF)damper.A dynamic model of the MRF damper-rotor system was built ...The aim of this work is to analyze and design a control system for vibration reduction in a rotor system using a shear mode magnetorheological fluid(MRF)damper.A dynamic model of the MRF damper-rotor system was built and simulated in Matlab/Simulink to analyze the rotor vibration characteristics and the vibration reduction effect of the MRF damper.Based on the numerical simulation analysis,an optimizing control strategy using pattern search method was proposed and designed.The control system was constructed on a test rotor bench and experiment validations on the effectiveness of the proposed control strategy were conducted.Experimental results show that rotor vibration caused by unbalance can be well controlled whether in resonance region(70%)or in non-resonance region(30%).An irregular vibration amplitude jump can be suppressed with the optimization strategy.Furthermore,it is found that the rapidity of transient response and efficiency of optimizing technique depend on the pattern search step.The presented strategies and control system can be extended to multi-span(more than two or three spans)rotor system.It provides a powerful technical support for the extension and application in target and control for shafting vibration.展开更多
A specially designed fluid damper used as negative shock pulse generator in the shock resistance test system to dissipate the shock input energy in transient time duration is presented. The theoretical modeling based ...A specially designed fluid damper used as negative shock pulse generator in the shock resistance test system to dissipate the shock input energy in transient time duration is presented. The theoretical modeling based on the three-dimensional equation of heat transfer through a fluid element is created to predict the viscous heating in the fluid damper under shock conditions. A comprehensive experimental program that investigates the problem of viscous heating in the fluid damper under different shock conditions is conducted on the shock test machine to validate the analytical expression. Temperature histories for the fluid within the damper at two locations, the annular-oriflce and the-end-of stroke of the damper, are recorded. The experimental results show that the theoretical model can offer a very dependable prediction for the temperature histories in the damper for increasing input velocity. The theoretical model and experimental data both clearly indicate that the viscous heating in the damper is directly related to the maximum shock velocity input and the pressure between the two sides of the piston head.展开更多
According to the structural characteristics of embedded fluid elastomeric damper and dynamic modeling method of bearingless rotor(BR)system,a time-domain dynamic model based on multilayer elastomeric theory and fluid ...According to the structural characteristics of embedded fluid elastomeric damper and dynamic modeling method of bearingless rotor(BR)system,a time-domain dynamic model based on multilayer elastomeric theory and fluid dynamic equations is developed.The parameters contained in the analysis model are identified by dynamic experiment data of embedded fluid elastomeric damper.The dynamic characteristics curves calculated through dynamic model are compared with those derived from experimental data.The consistent results illustrate that the model can describe the nonlinear relationship between stress and strain of embedded fluid elastomeric damper under different displacement amplitude and frequency.Due to the validity and reliability of the dynamic analysis model,it can be used in aeroelastic characteristics calculation of BR with embedded fluid elastomeric damper for helicopters.展开更多
基金The National Basic Research Program of China(973Program) (No2002CB312102)the National Natural ScienceFoundation of China (No60675047)
文摘The damper is capable of providing a continuously variable dampering force/torque in response to a magnetic field. It consists of an upside cap and an underside cap with a rotor located between them, the magneto-rheological （MR） fluid is filled into the gaps between the rotor and the caps. When the viscosity of the MR fluid increases under the influence of the magnetic field, the movement of the rotor will be resisted. The output torque is made up of the torque caused by the magnetic field, the torque caused by the plastic viscosity of the MR fluid, and the torque caused by the coulomb friction. The viscous torque can be calculated by a simple method and the frictional torque can be obtained by experiments. The torque dependent on the magnetic field is obtained by electromagnetic finite dement analysis. Experiments are done on the damper prototype and the validity of the design is verified.
基金Project (51108062) supported by the National Natural Science Foundation of ChinaProject(20100471446) supported by the China Postdoctoral Science Foundation
文摘To improve the magneto-rheological (MR) properties of magneto-rheological fluids, self-made amorphous alloy particles, the composition of which was Fe76Cr2Mo2Sn2P10B2C2Si4, were used as the disperse phase to replace traditional carbonyl iron (CI) particles to prepare amorphous based magneto-rheological fluid (AMRF). Soft magnetic properties and densities of the amorphous particles and the CI particles were tested and compared. The results indicate the amorphous particles present a lower density but larger magnetization intensity and larger permeability at lower field levels. Properties of the AMRF with 20% particles in volume fraction were tested and compared with the CI based MR fluid (CMRF). The AMRF presents a saturation yield stress of 41 kPa at ~227 kA/m and a sedimentation ratio of 80%. The results indicate the magneto-rheological fluid based on amorphous micro-particles has better MR properties and sedimentation stability than that based on CI particles at lower field levels (0-200 kA/m).
基金Supported by National Natural Science Foundation of China(Grant Nos.51475246,51277098)
文摘The vehicle semi-active suspension with magneto-theological damper（MRD） has been a hot topic since this decade, in which the robust control synthesis considering load variation is a challenging task. In this paper, a new semi-active controller based upon the inverse model and sliding mode control （SMC） strategies is proposed for the quarter-vehicle suspension with the magneto-rheological （MR） damper, wherein an ideal skyhook suspension is employed as the control reference model and the vehicle sprung mass is considered as an uncertain parameter. According to the asymptotical stability of SMC, the dynamic errors between the plant and reference systems are used to derive the control damping force acquired by the MR quarter-vehicle suspension system. The proposed modified Bouc-wen hysteretic force-velocity （F-v） model and its inverse model of MR damper, as well as the proposed continuous modulation （CM） filtering algorithm without phase shift are employed to convert the control damping force into the direct drive current of the MR damper. Moreover, the proposed semi-active sliding mode controller （SSMC）-based MR quarter-vehicle suspension is systematically evaluated through comparing the time and frequency domain responses of the sprung and unsprung mass displacement accelerations, suspension travel and the tire dynamic force with those of the passive quarter-vehicle suspension, under three kinds of varied amplitude harmonic, rounded pulse and real-road measured random excitations. The evaluation results illustrate that the proposed SSMC can greatly suppress the vehicle suspension vibration due to uncertainty of the load, and thus improve the ride comfort and handling safety. The study establishes a solid theoretical foundation as the universal control scheme for the adaptive semi-active control of the MR full-vehicle suspension decoupled into four MR quarter-vehicle sub-suspension systems.
基金supported by National Natural Science Foundation of China (Grant No. 51075215)Research, Innovation Project for College Graduates of Jiangsu Province (Grant No. CXLX11_0889)
文摘The control study of vehicle semi-active suspension with magneto-rheological (MR) dampers has been attracted much attention internationally. However, a simple, real time and easy implementing semi-active controller has not been proposed for the MR full-vehicle suspension system, and a systematic analysis method has not been established for evaluating the multi-objective suspension performances of MR full-vehicle vertical, pitch and roll motions. For this purpose, according to the 7-degree of freedom (DOF) fullvehicle dynamic system, a generalized 7-DOF MR and passive full-vehicle dynamic model is set up by employing the modified Boucwen hysteretic force-velocity (F-v) model of the MR damper. A semi-active controller is synthesized to realize independent control of the four MR quarter-vehicle sub-suspension systems in the full-vehicle, which is on the basis of the proposed modified skyhook damping scheme of MR quarter-vehicle sub-suspension system. The proposed controller can greatly simplify the controller design complexity of MR full-vehicle suspension and has merits of easy implementation in real application, wherein only absolute velocities of sprung and unsprung masses with reference to the road surface are required to measure in real time when the vehicle is moving. Furthermore, a systematic analysis method is established for evaluating the vertical, pitch and roll motion properties of both MR and passive full-vehicle suspensions in a more realistic road excitation manner, in which the harmonic, rounded pulse and real road measured random signals with delay time are employed as different road excitations inserted on the front and rear two wheels, by considering the distance between front and rear wheels in full-vehicle. The above excitations with different amplitudes are further employed as the road excitations inserted on left and right two wheels for evaluating the roll motion property. The multi-objective suspension performances of ride comfort and handling safety of the proposed MR full-vehicle suspension are thus thoroughly evaluated by comparing with those of the passive full-vehicle suspension. The results show that the proposed controller can ideally improve multiobjective suspension performances of the ride comfort and handling safety. The proposed harmonic, rounded pulse and real road measured random signals with delay time and asymmetric amplitudes are suitable for accurately analyzing the vertical, pitch and roll motion properties of MR full-vehicle suspension system in a more realistic road excitation manner. This research has important theoretical significance for improving application study on the intelligent MR semi-active suspension.
基金supported by Senior Visiting Scholarship of Chinese Scholarship Council (No.20H05002)Natural Science Foundation of Education Commission of Jiangsu Province, China (No.03KJB510072)Six Categories of Summit Talents of Jiangsu Province, China (No. 2006194).
文摘A modified skyhook-based semi-active controller is proposed for implementing an asymmetric control suspension design with symmetric magneto-rheological （MR） dampers. The controller is formulated in current form, which is modulated by integrating a continuous modulation and an asymmetric damping force generation algorithms, so as to effectively minimize switching and hysteretic effects from the MR-damper. The proposed controller is implemented with a quarter-vehicle MR-suspension model, and its relative response characteristics are thus evaluated in terms of defined performance measures under varying amplitude harmonic, rounded pulse and random excitations. The sensitivity of the semi-active suspension performance to variations in controller parameters is thoroughly evaluated. The results illustrate that the proposed skyhook-based asymmetric semi-active MR-suspension controller has superior robustness on the system parameter variations, and can achieve desirable multi-objective suspension performance.
基金Senior Visiting Scholarship of Chinese Scholarship Council (No.20H05002)Jiangsu Provincial Natural Science Foundation of Education Commission of China (No.03KJB510072)Jiangsu Provincial Six Categories of Summit Talents of China (No.2OO6194)
文摘The design and analysis of an intelligent vehicle suspension with MR dampers should address hybrid semi-active control goals, such as rejection of current-switching discontinuity and MR-damper hysteresis, asymmetric damping from the symmetric MR-damper design, robustness on the vehicle operation parameter uncertainties and consideration of essential multiple suspension goals. Following the proposed skyhook-based asymmetric semi-active controller （Part I ） for achieving the above goals, herein, a set of suspension performance measures and three kinds of varying amplitude harmonic, rounded pulse and really measured random excitations are systematically defined, and the sensitivity of quarter-vehicle MR-suspension performance to variations in operating conditions is thoroughly analyzed. The results illustrate that the proposed skyhook-based semi-active MR-suspension in the asymmetric mode yields relatively superior dynamic responses to meet the multiple suspension performances of ride, rattle space, road-holding and dynamic tire force transmitted to the pavement, and has desirable robustness on variations in operating conditions of vehicle load and speed and the road roughness.
基金supported by China Postdoctoral Science Foundation(No. 20080441093)Key Laboratory Foundation of Liaoning Province(No. 2008S088)Postdoctoral Science Foundation of Northeastern University (No. 20080411)
文摘The above-knee intelligent bionic leg is very helpful to amputees in the area of rehabilitation medicine. This paper first introduces the functional demand of the above-knee prosthesis design. Then, the advantages of the four-bar link mechanism and the magneto-rheological （MR） damper are analyzed in detail. The fixed position of the MR damper is optimized and a virtual prototype of knee joint is given. In the end, the system model of kinematics, dynamics, and controller are given and a control experiment is performed. The control experiment indicates that the intelligent bionic leg with multi-axis knee is able to realize gait tracking of the amputee＇s healthy leg based on semi-active control of the MR damper.
文摘A disc-type magneto-rheological fluid damper operating in shear mode is proposed in this paper,which is based on the special characteristics of the magneto-rheological (MR) fluid with rapid, reversible and dramatic change in its rheological properties by the application of an external magnetic field. The magneticfield of the disc-type MR fluid damper is analysed by the finite element method ; the controllability of the disctype MR fluid damper on the dynamic behaviour of a rotor system ; and the effectiveness of the disc-type MR fluid damper in controlling the vibration of a rotor system, are studied in a flexible rotor system with an over-hung disc. It is shown that the magnetic flux density of the disc-type MR fluid damper in the working areas can significantly change with the applied current in the coil ; and that the dynamic behavior of the disc-type MR fluid damper can be varied by the application of an external magnetic field produced by a low voltage electromagnetic coil. The disc-type MR fluid damper can significantly change the dynamic characteristics of a rotor system, provided that the location of the disk-type MR fluid damper is carefully chosen. The disc-type MR fluid damper is a new actuator with good dynamic characteristics for rotating machinery.
基金the National Natural Science Foundation of China(No.61074090)the Program for Liaoning Excellent Talents in University(No.LR2011005)the Aviation Industry Corporation of China Innovation Funds(No.cxy2011SH)
文摘Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject,the dynamical model for the shipboard aircraft arresting system is established,and the magneto-rheological(MR) damper is applied to pulley shock absorbers for shipboard aircraft block system.Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined,we use a set of characteristic test of the MR damper,through the process of parameters identification,to establish the dynamical model for the MR damper based on the Bingham plastic model.Then,the fuzzy control rules are designed,the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition,the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable.It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.
基金co-supported by the Natural Science Foundation of Jiangsu Province(No.BK20230092)by the National Natural Science Foundation of China(Nos.52375500,52075256,and U22A20204).
文摘Owing to their remarkable flexibility and favorable cost-effectiveness,industrial robots have found extensive applications to cutting of materials across sophisticated manufacturing fields.However,the structurally low rigidity of these robots renders the tool tip prone to substantial oscillations during machining processes,significantly impacting product fabrication quality.The objective of this study is to present a novel methodology employing magnetorheological dampers for mitigating vibrations during robotic milling operations.Specifically,a new type of ring nested Magneto-Rheological Foam Damper(MRFD)working in the squeeze mode is developed.Firstly,the MRFD’s structure is designed considering the vibrational characteristics of robotic milling.Subsequently,a damping force model of the MRFD is derived.The feasibility of the MRFD’s structural design is validated by the finite element analyses,which is instrumental in comprehending the influence of structural parameters on the electromagnetic characteristics of the MRFD.Next,a prototype of the MRFD is fabricated selecting appropriate parameters.Finally,a series of excitation and milling experiments are conducted on a KUKA KR500 robot.The outcomes demonstrate a substantial reduction(37%-69%)in radial vibration amplitude at the tool tip during robotic milling,highlighting the effectiveness of the developed MRFD.This research endeavor has introduced a pioneering avenue and framework for vibration control in robotic milling,offering a novel paradigm for enhancing the precision of robotic machining.
基金supported by the Basic Science Research Program of the National Research Foundation of Korea (NRF)funded by the Ministry of Education, Science and Technology of the government of Korea (Grant No. 2010-0025763)+1 种基金supported by the MSIP (Ministry of Science, ICT&Future Planning), Korea, under the C-ITRC (Convergence Information Technology Research Center) support program (NIPA-2013-H0401-13-1006) supervised by the NIPA(National IT Industry Promotion Agency)supported by INHA University
文摘Reciprocating friction characteristics of magneto-rheological （MR） fluid for aluminum under a magnetic field at different loads and oscillation frequencies were studied when MR fluids were worked in reciprocating motions such as in dampers for automobiles, and surface polishing and other finishing. Thus, experiments were carried out to evaluate the reciprocating friction characteristic of MR fluid for aluminum. The obtained data from the tests are sorted in groups depending on various loads and oscillation frequencies, to analyze the relationship between test condition and travel cycle. Surfaces of specimens were compared by measuring the surface roughness and observing the surface images. The performance of reciprocating friction characteristics of MR fluid for aluminum is evaluated through analyzing the experiment results.
基金Senior Visiting Scholarship of Chinese Scholarship Council(No. 20H05002)Natural Science Foundation of Education Commission of Jiangsu Province of China (No. 03KJB510072)Six Categories of Summit Talents of Jiangsu Province of China (No.184080H10207).
文摘A hardware-in-the-loop （HIL） test and simulation platform is developed in the laboratory, so as to validate the performance characteristics of the proposed skyhook-based asymmetric semi-active controller in Part I, and examine the validity of the proposed MR-damper model in a system surrounding. A real-time monitor is designed to assess and monitor the responses of the quarter-vehicle model in the HIL platform, and to select the excitation, controller synthesis, and the output displays. A drive current circuit hardware employing PID feedback technique is developed to compensate for the time delays from the servo-controller and drive current circuit, in which a small resistance is integrated in the current amplifier circuit to provide the feedback signal. The experiments were performed to measure the responses of the quarter-vehicle MR-suspension models with fixed current and the proposed semi-active MR-damping variations, under harmonic, rounded pulse and random road excitations. The measured data were compared with the corresponding model results to examine the model and controller validity, and revealed generally good agreements in the model and tested results and very little sensitivity of the tested responses to variations in the sprung mass. The HIL test results validate the effectiveness of the proposed skyhook-based semi-active asymmetric controller and its high robustness against the vehicle load variations in view of the intelligent vehicle suspension design.
文摘The aim of this study is to address the issues associated with traditional magnetorheological fluid(MRF)dampers,such as insufficient damping force after power failure and susceptibility to settlement.In order to achieve this,a bidirectional adjustable MRF damper was designed and developed.Magnetic field simulation analysis was conducted on the damper,along with simulation analysis on its dynamic characteristics.The dynamic characteristics were ultimately validated through experimental testing on the material testing machine,thereby corroborating the theoretical simulation results.Concurrently,this process generated valuable test data for subsequent implementation of the semi-active vibration control system.The simulation and test results demonstrate that the integrated permanent magnet effectively accomplishes bidirectional regulation.The magnetic induction intensity of the damping channel is 0.2 T in the absence of current,increases to 0.5 T when a maximum forward current of 4 A is applied,and becomes 0 T when a maximum reverse current of 3.8 A is applied.When the excitation amplitude is 8 mm and the frequency is 2 Hz,with the applied currents varying,the maximum damping force reaches 8 kN,while the minimum damping force measures at 511 N.Additionally,at zero current,the damping force stands at 2 kN,which aligns closely with simulation results.The present paper can serve as a valuable reference for the design and research of semi-active MRF dampers.
基金Project(51175265) supported by the National Natural Science Foundation of ChinaProject(CX10B_114Z) supported by Jiangsu College Graduate Research and Innovation Program,China+1 种基金Project(BK2008415) supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(Y1110313) supported by the Natural Science Foundation of Zhejiang Province,China
文摘A semi-active magneto-rheological （MR） damper was experimentally investigated and compared to an original equipment manufacturer （OEM） damper for a passenger vehicle, by using a quarter car models. A full-scale two-degree-of-freedom quarter car experimental set-up was constructed to study the vehicle suspension. On-off skyhook controller and Fuzzy-Lyapunov skyhook controller （FLSC） were employed to control the input current for MR damper so as to achieve the desired damping force. Tests were done to evaluate the ability of MR damper for controlling vehicle vibration. Test results show that the semi-active MR vehicle suspension vibration control system is feasible. In comparison with OEM damper, on-off and FLSC controlled MR dampers can effectively reduce the acceleration of vehicle sprtmg mass by about 15% and 24%, respectively.
文摘This paper puts forward the magneto-rheological fluid used in the fuze safe and arming system,realizing the time delay,ensuring the muzzle safety distance.The delay arming time model of a centrifugal MRF delay arming mechanism of fuze was established based on hydrodynamics formulae,reasonable hypothesis,speciality of MRF and fuze environmental parameters.The delay arming time formula was deduced.The model illustrates the relationship between delay arming time and projectile rotating speed,and that between diameter of discharge hole and viscosity of magneto-rheological fluid.According to the analysis,a new fuze delay arming device using MRF was proposed,which can be used in medium and large caliber fuze.
基金the National Natural Science Foundation of China(Nos.61074090 and 60804025)the Innovation Funds of Aviation Industry Corporation of China(No.cxy2013SH16)the Natural Science Foundation of Liaoning(Nos.2015020061 and 2015020069)
文摘The research on the form and control method of impact load arresting buffer has been an active topic in the field of buffer arresting system(BAS).It becomes significant on reducing the weight of arresting system,improving the hindered efficiency,and guaranteeing the security of BAS.The hydraulic hindered device of impact load is currently used in BAS.There are some problems.For example,the system needs large power sources.However,once the power of active hydraulic control system is turned off,there arise unpredictable security risks.An arresting form of semi-active control based on magneto-rheological damper(MRD) is proposed,and the mechanical model of the BAS is established.Meanwhile,the state equation of impact load BAS is established according to the characteristics of impact load buffer arresting,and its sliding model buffer control is achieved.Due to the chattering characteristic of the output signal of sliding mode controller,the method to prevent chattering is designed based on short-term energy and zero-crossing rate detection.For the model and chattering suppression of sliding model buffer control algorithms,simulation results show that the proposed state equation and the arresting model are reasonable,and the design of semi-active control algorithm is effective.On the condition of the buffer control system requirement and the accuracy,the proposed algorithms effectively control the chattering of sliding mode control algorithms,and improve the security of the BAS.
基金Supported by National Nature Fund and National Civil-Defense Office
文摘Severe vibration of underground structures may be induced under blast loads. According to the characteristics of the explosion-induced ground shock wave, a new-type damper, inverse control magneto-rheological（MR） damper was designed to control the vibration, The high-frequency performance test of the MR damper was carried out on the small shaking table. It is shown that the performance can be modeled by use of the modified Bouc-Wen model, and the Parameters of the model keep stable in the range of 15--50 Hz.
基金Supported by the National Program on Key Basic Research Program(″973″Program)(2012CB026000)the Ph.D.Programs Foundation of Ministry of Education of China(20110010110009)
文摘The aim of this work is to analyze and design a control system for vibration reduction in a rotor system using a shear mode magnetorheological fluid(MRF)damper.A dynamic model of the MRF damper-rotor system was built and simulated in Matlab/Simulink to analyze the rotor vibration characteristics and the vibration reduction effect of the MRF damper.Based on the numerical simulation analysis,an optimizing control strategy using pattern search method was proposed and designed.The control system was constructed on a test rotor bench and experiment validations on the effectiveness of the proposed control strategy were conducted.Experimental results show that rotor vibration caused by unbalance can be well controlled whether in resonance region(70%)or in non-resonance region(30%).An irregular vibration amplitude jump can be suppressed with the optimization strategy.Furthermore,it is found that the rapidity of transient response and efficiency of optimizing technique depend on the pattern search step.The presented strategies and control system can be extended to multi-span(more than two or three spans)rotor system.It provides a powerful technical support for the extension and application in target and control for shafting vibration.
基金Chinese Navy Warship Research Center(No.05131-1046)
文摘A specially designed fluid damper used as negative shock pulse generator in the shock resistance test system to dissipate the shock input energy in transient time duration is presented. The theoretical modeling based on the three-dimensional equation of heat transfer through a fluid element is created to predict the viscous heating in the fluid damper under shock conditions. A comprehensive experimental program that investigates the problem of viscous heating in the fluid damper under different shock conditions is conducted on the shock test machine to validate the analytical expression. Temperature histories for the fluid within the damper at two locations, the annular-oriflce and the-end-of stroke of the damper, are recorded. The experimental results show that the theoretical model can offer a very dependable prediction for the temperature histories in the damper for increasing input velocity. The theoretical model and experimental data both clearly indicate that the viscous heating in the damper is directly related to the maximum shock velocity input and the pressure between the two sides of the piston head.
文摘According to the structural characteristics of embedded fluid elastomeric damper and dynamic modeling method of bearingless rotor(BR)system,a time-domain dynamic model based on multilayer elastomeric theory and fluid dynamic equations is developed.The parameters contained in the analysis model are identified by dynamic experiment data of embedded fluid elastomeric damper.The dynamic characteristics curves calculated through dynamic model are compared with those derived from experimental data.The consistent results illustrate that the model can describe the nonlinear relationship between stress and strain of embedded fluid elastomeric damper under different displacement amplitude and frequency.Due to the validity and reliability of the dynamic analysis model,it can be used in aeroelastic characteristics calculation of BR with embedded fluid elastomeric damper for helicopters.
