Due to the influence of magnetic hysteresis and energy loss inherent in giant magnetostrictive materials （GMM）, output displacement accuracy of giant magnetostrictive actuator （GMA） can not meet the precision and ...Due to the influence of magnetic hysteresis and energy loss inherent in giant magnetostrictive materials （GMM）, output displacement accuracy of giant magnetostrictive actuator （GMA） can not meet the precision and ultra precision machining. Using a GMM rod as the core driving element, a GMA which may be used in the field of precision and ultra precision drive engineering is designed through modular design method. Based on the Armstrong theory and elastic Gibbs free energy theory, a nonlinear magnetostriction model which considers magnetic hysteresis and energy loss characteristics is established. Moreover, the mechanical system differential equation model for GMA is established by utilizing D＇Alembert＇s principle. Experimental results show that the model can preferably predict magnetization property, magnetic potential orientation, energy loss for GMM. It is also able to describe magnetostrictive elongation and output displacement of GMA. Research results will provide a theoretical basis for solving the dynamic magnetic hysteresis, energy loss and working precision for GMA fundamentally.展开更多
The dependences of the power loss per cycle on frequency have been investigated in the ranges of 100 Hz<= f<=25000 Hz and 0.1 T< =Bm <=1.0 T for three main original magnetic states in five sorts of Fe-base...The dependences of the power loss per cycle on frequency have been investigated in the ranges of 100 Hz<= f<=25000 Hz and 0.1 T< =Bm <=1.0 T for three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloys. The measured and calculated results showed that the total power loss per cycle clearly exhibited a nonlinear behavior in the range below 3 kHz～5 kHz depending on both the magnetic state and the value of Dm, whereas it showed a quasi-linear behavior above this range. The total loss was decomposed into hysteresis loss, classical eddy current loss and excess loss, the obvious nonlinear behavior has been confirmed to be completely determined by the dependence of the excess loss on frequency. It has been indicated that the change rate of the excess loss per cycle with respect to frequency sharp decreases with increasing frequency in the range below about 3 kHz～5 kHz, wherease the rate of change slowly varies above this range, thus leading to the quasilinear behavior of the total loss per cycle. In this paper, some linear expressions of the total loss per cycle has been given in a wider medium-frequency segment, which can be used for roughly estimating the total loss.展开更多
The dependences of the power loss per cycle on frequency f and amplitude flux density Bm have been investigated for the three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloy...The dependences of the power loss per cycle on frequency f and amplitude flux density Bm have been investigated for the three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloys in the ranges of 10 Hz<=f<=1000 Hz and 0.4 T<= Bm <=1.0 T. The total loss P is decomposed into the sum of the hysteresis loss Physt, the classical eddy current loss Pel and the excess loss Pexc. Physt has been found to be proportional to Bm^2 and f. The behavior of Pexc/f vs f being equivalent to P/f vs f clearly exhibits nonlinearity in the range not more than about 120 Hz, whereas the behavior of P/f vs f roughly shows linearity in the range far above 100 Hz and not more than 1000 Hz. In the range up to 1000 Hz, Physt is dominant in the original high permeability state and the state of low residual flux density, whereas Pexc in the state of high residual flux density is dominant in the wider range above about 100 Hz. The framework of the statistical theory of power loss has been used for representing the behavior of Pexc/f vs f. It has been found that the number n of the simultaneously active 'Magnetic Objects' linearly varies as n = n0 + Hexc/H0 as a function of the dynamic field Hexc in the range below about 120 Hz, whereas n approximately follows a law of the form n = n0 + (Hexc/H0)^m with 1 < m < 2 in the range far above 100 Hz and not more than 1000 Hz. The values of the field HO in principle related to the microstructure and the domain structure have been calculated for the three states.展开更多
A big enough transverse magnetic field applied to soft magnetic ferrite toroid can magnetize the ferrite to a saturation level in transverse direction and almost completely suppresses magnetic domain structures in the...A big enough transverse magnetic field applied to soft magnetic ferrite toroid can magnetize the ferrite to a saturation level in transverse direction and almost completely suppresses magnetic domain structures in the ferrite,the response to the longitudinal alternating electromagnetic field changes from the original domain wall displacements and spin rotations to the precession of magnetization around the transverse field,and the hysteresis loss disappears in the ferrites.Both theoretical and experimental results indicate that the permeability and magnetic loss in the ferrite can be controlled by adjusting the transverse magnetic field.A higher Q value with relatively low permeability can be achieved by increasing the transverse field,which ensures that the ferrite can be operated at high frequencies,with magnetic loss being very low.展开更多
The magnetic field provided by magnetized SrFe_(12)O_(19)particles in FeSi/SrFe_(12)O_(19)composites is used to replace the applied transverse magnetic field,which successfully reduces the magnetic loss of the composi...The magnetic field provided by magnetized SrFe_(12)O_(19)particles in FeSi/SrFe_(12)O_(19)composites is used to replace the applied transverse magnetic field,which successfully reduces the magnetic loss of the composites with minor reduction of permeability.This magnetic loss reduction mainly comes from the decrease in hysteresis loss,while the eddy current loss is basically unaffected.The hysteresis loss reduction in magnetized composites is believed to be due to the decrease in domain wall displacement caused by the increase in the average magnetic domain size in a DC magnetic field.This is an effective method for reducing the magnetic loss of soft magnetic composites with wide application potential,and there is no problem of increasing the cost and the volume of the magnetic cores.展开更多
The paper describes a simulated experiment that focuses on the numeric computation of magnetic loss in the laminated core of a single-phase power transformer. The students’ laboratory work is part of the library of e...The paper describes a simulated experiment that focuses on the numeric computation of magnetic loss in the laminated core of a single-phase power transformer. The students’ laboratory work is part of the library of experiments of the Electrical Machines virtual laboratory and makes use of the two-dimensional open-access electromagnetic field analysis software Finite Element Method Magnetics. The idea of the simulated exercise is to demonstrate how the magnetic loss caused by time-varying excitations affects the magnetic permeability, <em>μ</em>, of the laminated core and the terminal quantities of the energizing winding. A parametric analysis employing different values for the electrical conductivity and maximum hysteresis-induced angle of the laminated material yields five different field problems with increasing magnetic loss. Electric circuits characterized by the (<em>I-V</em>) operating point and reflected impedance of the energizing winding provide the information required to compute the changes in real power Δ<em>P</em>, reactive power Δ<em>Q</em> and magnetically stored energy Δ<em>W</em><sub>m</sub> between successive problems characterized by increasing magnetic loss. The concept of reflected impedance helps to explain the physical meaning of the changes in power dissipation and energy storage in the laminated core.展开更多
We present a theoretic model to calculate skin depths and eddy-current power losses for a magnetic position sensor. Eddy-current, arised from the operation of an alternating-current excitation, induces secondary curre...We present a theoretic model to calculate skin depths and eddy-current power losses for a magnetic position sensor. Eddy-current, arised from the operation of an alternating-current excitation, induces secondary currents and fields between magnetic material and magnetic position sensor. In this paper, a magnetic position sensor system is simplified to be an outer-winding coil along the axial direction of a low carbon steel bar. The analytical model is derived from basic field and circuit theory considering a linear approximation for a nonlinear permeability. Thus the skin depths and eddy-current power losses from the model in eddy-current modeling techniques at various frequencies of an excited current source can be calculated. The proposed configuration is capable of predicting the skin depths and eddy-current power losses for a magnetic position sensor and has a consistence with experiments.展开更多
High-frequency magnetic materials are crucial for realizing anti-electromagnetic interference in GHz communication devices and electronic equipment.Current mainstream strategy to enhance highfrequency magnetic losses ...High-frequency magnetic materials are crucial for realizing anti-electromagnetic interference in GHz communication devices and electronic equipment.Current mainstream strategy to enhance highfrequency magnetic losses is shape anisotropy,and it is still difficult to obtain an improvement in intrinsic magnetic loss through electronic structure design.In this paper,the effects of 4f-3d interaction between Er and Fe/Co on magnetic moment,charge migration,and spin polarization were investigated based on density functional theory(DFT).The results show that Er 4f-Fe 3d orbitals undergo significant hybridization at around-4 eV,which increase the electronic locality of Fe and enhance the spin of Fe from 2.86 h/2 to 2.91 h/2.The Fe_(0.5-x)Co_(0.5)Er_(x)(0≤x≤0.05)alloys were further prepared by vacuum induction melting and mechanical alloying methods.The saturation magnetization intensity(Ms)increases from 0.141 to 0.182 A·m^(2)/g with increasing Er content.The μ"of Fe_(0.47)Co_(0.5)Er_(0.03)at 16.7 GHz increases from 0.55 to 0.93,and the frequency range over which tanδ_μvalues are greater than 0.5covers 8.0-18.0 GHz,with the maximum value being 0.83 at 17.0 GHz.These results indicate that the Fe_(0.5-x)Co_(0.5)Er_(x)/paraffin composite materials have excellent high-frequency magnetic losses and are promising candidates in the field of microwave-absorbing materials.展开更多
Bioinspired nacre-like structured high-density soft magnetic composites(SMCs)have been successfully constructed using flaky-Fe_(73.8)Si_(13.5)B_(8.7)Cu_(1)Nb_(3) powders in the supercooled liquid region(SCLR).These de...Bioinspired nacre-like structured high-density soft magnetic composites(SMCs)have been successfully constructed using flaky-Fe_(73.8)Si_(13.5)B_(8.7)Cu_(1)Nb_(3) powders in the supercooled liquid region(SCLR).These densely arranged particles with a consistent planar orientation significantly enhance the soft magnetic properties of SMCs,including high permeability and low magnetic losses.The internal structures of the composites and microstructure evolution of the flaky nanocrystalline particles during the hot-pressing process have been thoroughly studied.Moreover,systematic investigations into the effects of coatings and particle sizes on the maximum permeability and magnetic losses of the composites are conducted.The SMC prepared using the coated particles with a size of 0-100μm exhibits a high maximum perme-ability of 2170(at 1000 Hz)and low magnetic loss of 41.61 W kg^(-1)(at 1000 Hz and 1.0 T).The losses and permeability analysis reveal that the superior performance of these soft magnetic materials is attributed to their laminated structure,insulation coating,and the reduced planar demagnetizing factor.Compared to the traditional silicon steel,this novel SMCs exhibits high magnetic permeability and reduced magnetic losses at frequencies above 1000 Hz,which possess immense application potential within high-frequency electric machines.展开更多
The magnetic loss plays a key role in electromagnetic waves(EMW)absorption.However,the magnetic loss ability would obviously draw at high frequency,and the component lacks the dielectric loss ability,resulting in poor...The magnetic loss plays a key role in electromagnetic waves(EMW)absorption.However,the magnetic loss ability would obviously draw at high frequency,and the component lacks the dielectric loss ability,resulting in poor EMW absorption.In this work,we design a core-shell-structured Fe@Sm_(2)Fe_(17)dual magnetic nanoparticle.The 200-nm Sm_(2)Fe_(17)nanoparticles play a key role in maintaining relatively high magnetic loss ability even at high frequency.And the introduction of 3-μm Fe cubes can optimize the dielectric parameters by the interface polarization and thus enhance the impedance matching.Meanwhile,Fe cubes with easy axis vertical to six planes can absorb the EMW with different directions,leading to the enhancement of the EMW attenuation.Especially,the Fe cubes can align the moment of Sm_(2)Fe_(17)nanoparticles,which can increase exchange-coupling interaction between them to further improve the magnetic loss capacity and broaden the effective absorption bandwidth(EAB).Furthermore,the small-sized Sm_(2)Fe_(17)nanoparticles provide a rough surface,which promotes multiple reflections and scattering of the incident EMW.As a result,the optimal EMW attenuation performance with a minimum reflection loss exceeding-51.4 dB and a broadened EAB up to 6.6 GHz at 1.4 mm was achieved in Fe@Sm_(2)Fe_(17)composites with Sm/Fe of 1:12.Our work provides profound insights into developing well-coordinated magnetic-dielectric nanocomposites for EMW absorption engineering.展开更多
Developing a flexible,light-weight and effective electromagnetic(EM)absorber remains challenging despite being on increasing demand as more wearable devices and portable electronics are commercialized.Herein,we report...Developing a flexible,light-weight and effective electromagnetic(EM)absorber remains challenging despite being on increasing demand as more wearable devices and portable electronics are commercialized.Herein,we report a flexible and lightweight hybrid paper by a facile vacuumfiltration-induced self-assembly process,in which cotton-derived carbon fibers serve as flexible skeletons,compactly surrounded by other microwave-attenuating components(reduced graphene oxide and Fe3O4@C nanowires).Owing to its unique architecture and synergy of the three components,the asprepared hybrid paper exhibits flexible and lightweight features as well as superb microwave absorption performance.Maximum absorption intensity with reflection loss as low as-63 dB can be achieved,and its broadest frequency absorption bandwidth of 5.8 GHz almost covers the entire Ku band.Such a hybrid paper is promising to cope with ever-increasing EM interference.The work also paves the way to develop low-cost and flexible EM wave absorber from biomass through a facile method.展开更多
The increasing electromagnetic hazards including electromagnetic interference and electromagnetic pollution,which were stemmed from massive usage of electromagnetic technology,have triggered widespread concerns.To cop...The increasing electromagnetic hazards including electromagnetic interference and electromagnetic pollution,which were stemmed from massive usage of electromagnetic technology,have triggered widespread concerns.To cope with this challenge,electromagnetic wave absorbing materials with high performance are greatly needed.Composite construction has been widely applied in electromagnetic(EM)wave absorbing materials to achieve high permittivity,high permeability and impedance matching.However,high-temperature stability,oxidation and corrosion resistance are still unignorable issues.Herein,high entropy hexaborides/tetraborides(HE REB_(6)/HE REB_(4))composites with synergistic dielectric and magnetic losses were designed and successfully synthesized through a one-step boron carbide reduction method.The five as-prepared(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(4),(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(4),(Y_(0.2) Nd_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(4),(Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(4) and(Y_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(4) contain two phases of HE REB_(6) and HE REB_(4).Among them(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(4)(HE REB_(6)/HE REB_(4)-1)and(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(4)(HE REB_(6)/HE REB_(4)-2)exhibit excellent EM wave absorption properties.The optimal minimum reflection loss(RL_(m in))and effective absorption bandwidth(E_(AB))of HE REB_(6)/HE REB_(4)-1 and HE REB_(6)/HE REB_(4)-2 are–53.3 dB(at 1.7 mm),4.2 GHz(at 1.5 mm)and–43.5 dB(1.3 mm),4.2 GHz(1.5 mm),respectively.The combination of conducting HE REB_(4) with magnetism into HE REB_(6) as a second phase enhances dielectric and magnetic losses,which lead to enhanced EM wave absorption performance.Considering superior high-temperature stability,oxidation and corrosion resistance of HE REB_(6) and HE REB_(4),HE REB_(6)/HE REB_(4) composite ceramics are promising as a new type of high-performance EM wave absorbing materials.展开更多
3D reticulated ceramics (3DRCs) with the composition containing SrFe12O19-SiC-TiO2 were prepared by a replication process with polyurethane sponges as the template in ceramic slurry. The electrical conductivity, diele...3D reticulated ceramics (3DRCs) with the composition containing SrFe12O19-SiC-TiO2 were prepared by a replication process with polyurethane sponges as the template in ceramic slurry. The electrical conductivity, dielectric and magnetic parameters of 3D reticulated ceramics (3DRCs) were measured with changes in cell size of the sponges, contents in the slurry and sintering temperature in this paper. Discussions about the influential factors of those parameters were focused on their electrical conductivity. The experimental results indicated that the electrical conductivity of 3DRCs raised with the increase of cell size, SiC/SrO 6Fe2O3 with weight ratio and sintering temperature. X-ray diffractions and SEM were used to investigate the relationship between electrical conductivity and sintering temperature. Deoxidizing reactions of SrO 6Fe2O3 caused the increasing electrical conductivity. The real part of permittivity (ε') and imaginary part of permeability (μ') raised with the increase of electrical conductivity (σ). The imaginary part of permittivity (ε') has a maximum at 10o S/cm with the increase of a, and the real part of permeability (μ') changes slightly with the increase of a. When a is at the range of 10-4 S/cm to 10o S/cm (a semi conductive state), both the imagine part of permittivity and permeability raises with increasing a, therefore, the 3DRCs present their high electromagnetic loss properties.展开更多
The emergence of wearable and foldable electronic devices urges advanced electromagnetic(EM)wave absorbers with maintained performance under deformation.Here FeCo@MoS_(2)poly vinyl alcohol(PVA)aerogels have been fabri...The emergence of wearable and foldable electronic devices urges advanced electromagnetic(EM)wave absorbers with maintained performance under deformation.Here FeCo@MoS_(2)poly vinyl alcohol(PVA)aerogels have been fabricated with the assistance of EM waves for simultaneous splitting of the MoS_(2)flakes and dispersive growth of FeCo nanoparticles.The resultants in-return have been used for EM wave absorption with excellent performance,providing minimum reflection loss(RL_(min))of-40.7 dB and a broad effective absorption bandwidth(EAB)of 6.4 GHz at a thickness of 2.5 mm.Real-time compression has been introduced to reveal the evolution of EM parameters.The aerogels maintain satisfactory performance even under 50%compression due to the balance of impedance matching and attenuation.Despite the deterioration of impedance matching,the attenuation is significantly enhanced due to both strengthened conductive loss and magnetic loss.In addition,features such as lightweight,self-cleaning and refractory can be achieved for the aerogels for applications in complex environments.As such this work not only provides a versatile synthetic route assisted by EM wave energy,but also insights on the evolution of absorption performance under deformation together with the design strategy of multifunctional flexible wave absorbers.展开更多
The microwave absorbents of Fe and C nanoparticles as magnetic loss and dielectric loss material respectively were composited with the polyvinyl alcohol(PVA)as binder by spray granulation method,The electromagnetic pa...The microwave absorbents of Fe and C nanoparticles as magnetic loss and dielectric loss material respectively were composited with the polyvinyl alcohol(PVA)as binder by spray granulation method,The electromagnetic parameters of Fe and C composite particles were analyzed by vector network.The complex permittivity and magnetic permeability of Fe and C composite particles matched well with increasing C nanoparticle content,and then the microwave loss property was improved.A minimum reflection loss(RL)of-42.7 dB at 3.68 GHz for a composite with 4.6 mm in thickness can be obtained when the content ratio of the C nanoparticles,the modified Fe nanoparticles and the PVA is 21:49:30(Sample 3).展开更多
We have investigated the magnetic transition and magnetocaloric effects of Mn1＋xCo1-xGe alloys by tuning the ratio of Mn/Co. With increasing Mn content, a series of first-order magnetostructural transitions from ferr...We have investigated the magnetic transition and magnetocaloric effects of Mn1＋xCo1-xGe alloys by tuning the ratio of Mn/Co. With increasing Mn content, a series of first-order magnetostructural transitions from ferromagnetic to paramagnetic states with large changes of magnetization are observed at room temperature. Further increasing the content of Mn （x = 0.11） gives rise to a single second-order magnetic transition. Interestingly, large low-field magnetic entropy changes with almost zero magnetic hysteresis are observed in these alloys. The effects of Mn/Co ratio on magnetic transition and magnetocaloric effects are discussed in this paper.展开更多
Due to the rapid development of radar technology,the demand for absorbing stealth materials is increas-ing,and ultra-broadband absorption(effective absorption bandwidth>8 GHz)has become an inevitable requirement.As...Due to the rapid development of radar technology,the demand for absorbing stealth materials is increas-ing,and ultra-broadband absorption(effective absorption bandwidth>8 GHz)has become an inevitable requirement.As a new type of two-dimensional material,MXene material possesses the characteristics of excellent wave absorbing material due to its easy preparation,easy modulation of defects and sur-face functional groups,and high conductivity.This work summarizes the absorbing theory and research progress on MXene-based absorbing materials in recent years,including pure MXene absorbing materials and MXene-based magnetic or dielectric composite materials with multiple losses.Some shortcomings and research directions of MXene-based materials were pointed out.Currently,research on MXene-based absorbent materials is thriving and in a state of vigorous development.Excellent absorbent materials have been reported,but their shortcomings are also apparent.The factors that affect the performance of MXene-based absorbent materials are complex,and the absorption mechanism is relatively simple.Further systematic and detailed research is needed to clarify these influencing mechanisms,broaden the absorption bandwidth,and reduce the matching thickness to meet practical usage requirements in the future.展开更多
Subtle microstructure design and an appropriate multicomponent strategy are essential for advanced electromagnetic absorbing(EMA)materials with a wide effective absorption bandwidth(EAB)and intense absorption.However,...Subtle microstructure design and an appropriate multicomponent strategy are essential for advanced electromagnetic absorbing(EMA)materials with a wide effective absorption bandwidth(EAB)and intense absorption.However,sophisticated environments restrict the range of applications for EMA materials.Herein,three hollow spherical bifunctional CoSx/MnS/C nanocomposites with different crystal structures were constructed via cation exchange and subsequent vulcanization.The manganese sulfide and carbon generated during vulcanization exhibit a narrow band gap and enhanced conductivity,thereby facilitating conductive loss.The presence of cobalt sulfide facilitates the improvement of magnetic loss.More importantly,there is a potential difference between different phases at the heterogeneous interface,resulting in a region of space charge,which is conducive to interfacial polarization.The 3D hollow structure and heterogeneous dielectric/magnetic interfaces benefit the predominant EMA performance by forming perfect impedance matching,interface polarization,conduction loss,and magnetic loss effects.Specifically,an optimal reflection loss(RL)of-51.31 dB at 10.72 GHz and an effective EAB of 5.92 GHz at 2.1 mm can be achieved for Co_(1-x) S/MnS/C nanocomposite.Moreover,the nanocomposites maintained promising self-anticorrosion properties in simulated seawater environments.Transition metal sulfides with superior self-anticorrosion properties provide a pathway to efficient wave-absorbing materials in complicated environments.展开更多
With the gradually increasing protection awareness about electromagnetic pollution,the demand for absorbing materials with renewability and environmental friendliness has attracted widespread attention.In this work,co...With the gradually increasing protection awareness about electromagnetic pollution,the demand for absorbing materials with renewability and environmental friendliness has attracted widespread attention.In this work,composites consisting of straw-derived biochar combined with NiCo alloy were successfully fabricated through high-temperature carbonization and subsequent hydrothermal reaction.The electromagnetic parameters of the porous biocarbon/NiCo composites can be effectively modified by altering their NiCo content,and their improved absorbing performance can be attributed to the synergy effect of magnetic-dielectric characteristics.An exceptional reflection loss of-27.0 dB at 2.2 mm thickness and an effective absorption bandwidth of 4.4 GHz(11.7-16.1 GHz)were achieved.These results revealed that the porous biocarbon/NiCo composites could be used as a new generation absorbing material because of their low density,light weight,excellent conductivity,and strong absorption.展开更多
Biomass absorbing materials have received increasing attention for electromagnetic wave(EMW)absorption field absorbing materials due to its low density and high dielectric loss.However,the biomass EMW absorbing materi...Biomass absorbing materials have received increasing attention for electromagnetic wave(EMW)absorption field absorbing materials due to its low density and high dielectric loss.However,the biomass EMW absorbing materials often suffer from the insufficient magnetic loss and impedance matching.In this work,a facile ZIF-8/ZIF-67-derived biomass composites(CoZnO@BPC)was prepared for high-performance EMW absorption based on multi-component micro,nano structures metal particles and xanthoce sorbifolia bunge shells-derived biomass porous carbon(BPC).The dielectric loss and/or magnetic loss abilities of CoZnO@BPC composites were adjusted by changing the mass ratio of Zn^(2+)to Co^(2+)ions.Under the filled amount of 20 wt%,Co Zn O@BPC exhibited excellent EMW absorption with the minimum reflection loss(RL)at 15.84 GHz is-50.2 dB,and the matching thickness is only 1.7 mm.By adjusting the ZIFs mass ratio,the effective absorption bandwidth(EAB)can be up to 5.92 GHz(from 12.08 GHz to 18 GHz),and the matching thickness is only 1.9 mm.The results provide a new insight for the economical and efficient preparation of lightweight and advanced microwave absorbing materials.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51305277)Doctoral Program of Higher Education China(Grant No.20132102120007)+1 种基金Shenyang Science and Technology Plan Project(Grant No.F15-199-1-14)China Postdoctoral Science Foundation(Grant No.2014T70261)
文摘Due to the influence of magnetic hysteresis and energy loss inherent in giant magnetostrictive materials （GMM）, output displacement accuracy of giant magnetostrictive actuator （GMA） can not meet the precision and ultra precision machining. Using a GMM rod as the core driving element, a GMA which may be used in the field of precision and ultra precision drive engineering is designed through modular design method. Based on the Armstrong theory and elastic Gibbs free energy theory, a nonlinear magnetostriction model which considers magnetic hysteresis and energy loss characteristics is established. Moreover, the mechanical system differential equation model for GMA is established by utilizing D＇Alembert＇s principle. Experimental results show that the model can preferably predict magnetization property, magnetic potential orientation, energy loss for GMM. It is also able to describe magnetostrictive elongation and output displacement of GMA. Research results will provide a theoretical basis for solving the dynamic magnetic hysteresis, energy loss and working precision for GMA fundamentally.
文摘The dependences of the power loss per cycle on frequency have been investigated in the ranges of 100 Hz<= f<=25000 Hz and 0.1 T< =Bm <=1.0 T for three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloys. The measured and calculated results showed that the total power loss per cycle clearly exhibited a nonlinear behavior in the range below 3 kHz～5 kHz depending on both the magnetic state and the value of Dm, whereas it showed a quasi-linear behavior above this range. The total loss was decomposed into hysteresis loss, classical eddy current loss and excess loss, the obvious nonlinear behavior has been confirmed to be completely determined by the dependence of the excess loss on frequency. It has been indicated that the change rate of the excess loss per cycle with respect to frequency sharp decreases with increasing frequency in the range below about 3 kHz～5 kHz, wherease the rate of change slowly varies above this range, thus leading to the quasilinear behavior of the total loss per cycle. In this paper, some linear expressions of the total loss per cycle has been given in a wider medium-frequency segment, which can be used for roughly estimating the total loss.
基金National Amorphous and Nanocrystalline Alloy Engineering Researeh Cease
文摘The dependences of the power loss per cycle on frequency f and amplitude flux density Bm have been investigated for the three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloys in the ranges of 10 Hz<=f<=1000 Hz and 0.4 T<= Bm <=1.0 T. The total loss P is decomposed into the sum of the hysteresis loss Physt, the classical eddy current loss Pel and the excess loss Pexc. Physt has been found to be proportional to Bm^2 and f. The behavior of Pexc/f vs f being equivalent to P/f vs f clearly exhibits nonlinearity in the range not more than about 120 Hz, whereas the behavior of P/f vs f roughly shows linearity in the range far above 100 Hz and not more than 1000 Hz. In the range up to 1000 Hz, Physt is dominant in the original high permeability state and the state of low residual flux density, whereas Pexc in the state of high residual flux density is dominant in the wider range above about 100 Hz. The framework of the statistical theory of power loss has been used for representing the behavior of Pexc/f vs f. It has been found that the number n of the simultaneously active 'Magnetic Objects' linearly varies as n = n0 + Hexc/H0 as a function of the dynamic field Hexc in the range below about 120 Hz, whereas n approximately follows a law of the form n = n0 + (Hexc/H0)^m with 1 < m < 2 in the range far above 100 Hz and not more than 1000 Hz. The values of the field HO in principle related to the microstructure and the domain structure have been calculated for the three states.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2022YFB3504800 and 2021YFB3502400)the Key Research and Development Plan of Anhui Province,China(Grant No.202003c08020012)the Key Program of Education Department of Anhui Province,China(Grant No.KJ2019ZD03)。
文摘A big enough transverse magnetic field applied to soft magnetic ferrite toroid can magnetize the ferrite to a saturation level in transverse direction and almost completely suppresses magnetic domain structures in the ferrite,the response to the longitudinal alternating electromagnetic field changes from the original domain wall displacements and spin rotations to the precession of magnetization around the transverse field,and the hysteresis loss disappears in the ferrites.Both theoretical and experimental results indicate that the permeability and magnetic loss in the ferrite can be controlled by adjusting the transverse magnetic field.A higher Q value with relatively low permeability can be achieved by increasing the transverse field,which ensures that the ferrite can be operated at high frequencies,with magnetic loss being very low.
基金supported by the National Natural Science Foundation of China(Grant Nos.51872004 and 51802002)the Key Program of the Education Department of Anhui Province,China(Grant No.KJ2019ZD03)the Science Foundation of the National Key Laboratory of Science and Technology on Advanced Composites in Specials Environments(Grant No.6142905202112)。
文摘The magnetic field provided by magnetized SrFe_(12)O_(19)particles in FeSi/SrFe_(12)O_(19)composites is used to replace the applied transverse magnetic field,which successfully reduces the magnetic loss of the composites with minor reduction of permeability.This magnetic loss reduction mainly comes from the decrease in hysteresis loss,while the eddy current loss is basically unaffected.The hysteresis loss reduction in magnetized composites is believed to be due to the decrease in domain wall displacement caused by the increase in the average magnetic domain size in a DC magnetic field.This is an effective method for reducing the magnetic loss of soft magnetic composites with wide application potential,and there is no problem of increasing the cost and the volume of the magnetic cores.
文摘The paper describes a simulated experiment that focuses on the numeric computation of magnetic loss in the laminated core of a single-phase power transformer. The students’ laboratory work is part of the library of experiments of the Electrical Machines virtual laboratory and makes use of the two-dimensional open-access electromagnetic field analysis software Finite Element Method Magnetics. The idea of the simulated exercise is to demonstrate how the magnetic loss caused by time-varying excitations affects the magnetic permeability, <em>μ</em>, of the laminated core and the terminal quantities of the energizing winding. A parametric analysis employing different values for the electrical conductivity and maximum hysteresis-induced angle of the laminated material yields five different field problems with increasing magnetic loss. Electric circuits characterized by the (<em>I-V</em>) operating point and reflected impedance of the energizing winding provide the information required to compute the changes in real power Δ<em>P</em>, reactive power Δ<em>Q</em> and magnetically stored energy Δ<em>W</em><sub>m</sub> between successive problems characterized by increasing magnetic loss. The concept of reflected impedance helps to explain the physical meaning of the changes in power dissipation and energy storage in the laminated core.
文摘We present a theoretic model to calculate skin depths and eddy-current power losses for a magnetic position sensor. Eddy-current, arised from the operation of an alternating-current excitation, induces secondary currents and fields between magnetic material and magnetic position sensor. In this paper, a magnetic position sensor system is simplified to be an outer-winding coil along the axial direction of a low carbon steel bar. The analytical model is derived from basic field and circuit theory considering a linear approximation for a nonlinear permeability. Thus the skin depths and eddy-current power losses from the model in eddy-current modeling techniques at various frequencies of an excited current source can be calculated. The proposed configuration is capable of predicting the skin depths and eddy-current power losses for a magnetic position sensor and has a consistence with experiments.
基金Project supported by the Nation Natural Science Foundation of China(52304410,51972242)Major Project of Hubei Province(2023BAA003)。
文摘High-frequency magnetic materials are crucial for realizing anti-electromagnetic interference in GHz communication devices and electronic equipment.Current mainstream strategy to enhance highfrequency magnetic losses is shape anisotropy,and it is still difficult to obtain an improvement in intrinsic magnetic loss through electronic structure design.In this paper,the effects of 4f-3d interaction between Er and Fe/Co on magnetic moment,charge migration,and spin polarization were investigated based on density functional theory(DFT).The results show that Er 4f-Fe 3d orbitals undergo significant hybridization at around-4 eV,which increase the electronic locality of Fe and enhance the spin of Fe from 2.86 h/2 to 2.91 h/2.The Fe_(0.5-x)Co_(0.5)Er_(x)(0≤x≤0.05)alloys were further prepared by vacuum induction melting and mechanical alloying methods.The saturation magnetization intensity(Ms)increases from 0.141 to 0.182 A·m^(2)/g with increasing Er content.The μ"of Fe_(0.47)Co_(0.5)Er_(0.03)at 16.7 GHz increases from 0.55 to 0.93,and the frequency range over which tanδ_μvalues are greater than 0.5covers 8.0-18.0 GHz,with the maximum value being 0.83 at 17.0 GHz.These results indicate that the Fe_(0.5-x)Co_(0.5)Er_(x)/paraffin composite materials have excellent high-frequency magnetic losses and are promising candidates in the field of microwave-absorbing materials.
基金supported by the National Natural Science Foundation of China(Grant No.52071294)the National Key Research and Development Program(Grant No.2022YFE0109800)the Natural Science Foundation of Zhejiang Province(Grant No.LY20E020015).
文摘Bioinspired nacre-like structured high-density soft magnetic composites(SMCs)have been successfully constructed using flaky-Fe_(73.8)Si_(13.5)B_(8.7)Cu_(1)Nb_(3) powders in the supercooled liquid region(SCLR).These densely arranged particles with a consistent planar orientation significantly enhance the soft magnetic properties of SMCs,including high permeability and low magnetic losses.The internal structures of the composites and microstructure evolution of the flaky nanocrystalline particles during the hot-pressing process have been thoroughly studied.Moreover,systematic investigations into the effects of coatings and particle sizes on the maximum permeability and magnetic losses of the composites are conducted.The SMC prepared using the coated particles with a size of 0-100μm exhibits a high maximum perme-ability of 2170(at 1000 Hz)and low magnetic loss of 41.61 W kg^(-1)(at 1000 Hz and 1.0 T).The losses and permeability analysis reveal that the superior performance of these soft magnetic materials is attributed to their laminated structure,insulation coating,and the reduced planar demagnetizing factor.Compared to the traditional silicon steel,this novel SMCs exhibits high magnetic permeability and reduced magnetic losses at frequencies above 1000 Hz,which possess immense application potential within high-frequency electric machines.
基金financially supported by the National Key Research and Development Program of China(No.2022YFB3505900)
文摘The magnetic loss plays a key role in electromagnetic waves(EMW)absorption.However,the magnetic loss ability would obviously draw at high frequency,and the component lacks the dielectric loss ability,resulting in poor EMW absorption.In this work,we design a core-shell-structured Fe@Sm_(2)Fe_(17)dual magnetic nanoparticle.The 200-nm Sm_(2)Fe_(17)nanoparticles play a key role in maintaining relatively high magnetic loss ability even at high frequency.And the introduction of 3-μm Fe cubes can optimize the dielectric parameters by the interface polarization and thus enhance the impedance matching.Meanwhile,Fe cubes with easy axis vertical to six planes can absorb the EMW with different directions,leading to the enhancement of the EMW attenuation.Especially,the Fe cubes can align the moment of Sm_(2)Fe_(17)nanoparticles,which can increase exchange-coupling interaction between them to further improve the magnetic loss capacity and broaden the effective absorption bandwidth(EAB).Furthermore,the small-sized Sm_(2)Fe_(17)nanoparticles provide a rough surface,which promotes multiple reflections and scattering of the incident EMW.As a result,the optimal EMW attenuation performance with a minimum reflection loss exceeding-51.4 dB and a broadened EAB up to 6.6 GHz at 1.4 mm was achieved in Fe@Sm_(2)Fe_(17)composites with Sm/Fe of 1:12.Our work provides profound insights into developing well-coordinated magnetic-dielectric nanocomposites for EMW absorption engineering.
基金financial support from National Natural Science Foundation of China(No.:51971111)the National Research Foundation,Prime Minister’s Office,Singapore under its Campus for Research Excellence and Technological Enterprise(CREATE)program+2 种基金the Funding for Outstanding Doctoral Dissertation in NUAA(No.BCXJ17-07)Postgraduate Research&Practice Innovation of Jiangsu Province(KYCX17_0252)the Open Research Fund of Jiangsu Provincial Key Laboratory of Bionic Functional Materials。
文摘Developing a flexible,light-weight and effective electromagnetic(EM)absorber remains challenging despite being on increasing demand as more wearable devices and portable electronics are commercialized.Herein,we report a flexible and lightweight hybrid paper by a facile vacuumfiltration-induced self-assembly process,in which cotton-derived carbon fibers serve as flexible skeletons,compactly surrounded by other microwave-attenuating components(reduced graphene oxide and Fe3O4@C nanowires).Owing to its unique architecture and synergy of the three components,the asprepared hybrid paper exhibits flexible and lightweight features as well as superb microwave absorption performance.Maximum absorption intensity with reflection loss as low as-63 dB can be achieved,and its broadest frequency absorption bandwidth of 5.8 GHz almost covers the entire Ku band.Such a hybrid paper is promising to cope with ever-increasing EM interference.The work also paves the way to develop low-cost and flexible EM wave absorber from biomass through a facile method.
基金financially supported by the National Natural Science Foundation of China(Nos.51972089,51672064 and U1435206)。
文摘The increasing electromagnetic hazards including electromagnetic interference and electromagnetic pollution,which were stemmed from massive usage of electromagnetic technology,have triggered widespread concerns.To cope with this challenge,electromagnetic wave absorbing materials with high performance are greatly needed.Composite construction has been widely applied in electromagnetic(EM)wave absorbing materials to achieve high permittivity,high permeability and impedance matching.However,high-temperature stability,oxidation and corrosion resistance are still unignorable issues.Herein,high entropy hexaborides/tetraborides(HE REB_(6)/HE REB_(4))composites with synergistic dielectric and magnetic losses were designed and successfully synthesized through a one-step boron carbide reduction method.The five as-prepared(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(4),(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(4),(Y_(0.2) Nd_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(4),(Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(4) and(Y_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2) Yb_(0.2))B_(4) contain two phases of HE REB_(6) and HE REB_(4).Among them(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Eu_(0.2) Er_(0.2))B_(4)(HE REB_(6)/HE REB_(4)-1)and(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(6)/(Y_(0.2) Nd_(0.2) Sm_(0.2) Er_(0.2) Yb_(0.2))B_(4)(HE REB_(6)/HE REB_(4)-2)exhibit excellent EM wave absorption properties.The optimal minimum reflection loss(RL_(m in))and effective absorption bandwidth(E_(AB))of HE REB_(6)/HE REB_(4)-1 and HE REB_(6)/HE REB_(4)-2 are–53.3 dB(at 1.7 mm),4.2 GHz(at 1.5 mm)and–43.5 dB(1.3 mm),4.2 GHz(1.5 mm),respectively.The combination of conducting HE REB_(4) with magnetism into HE REB_(6) as a second phase enhances dielectric and magnetic losses,which lead to enhanced EM wave absorption performance.Considering superior high-temperature stability,oxidation and corrosion resistance of HE REB_(6) and HE REB_(4),HE REB_(6)/HE REB_(4) composite ceramics are promising as a new type of high-performance EM wave absorbing materials.
文摘3D reticulated ceramics (3DRCs) with the composition containing SrFe12O19-SiC-TiO2 were prepared by a replication process with polyurethane sponges as the template in ceramic slurry. The electrical conductivity, dielectric and magnetic parameters of 3D reticulated ceramics (3DRCs) were measured with changes in cell size of the sponges, contents in the slurry and sintering temperature in this paper. Discussions about the influential factors of those parameters were focused on their electrical conductivity. The experimental results indicated that the electrical conductivity of 3DRCs raised with the increase of cell size, SiC/SrO 6Fe2O3 with weight ratio and sintering temperature. X-ray diffractions and SEM were used to investigate the relationship between electrical conductivity and sintering temperature. Deoxidizing reactions of SrO 6Fe2O3 caused the increasing electrical conductivity. The real part of permittivity (ε') and imaginary part of permeability (μ') raised with the increase of electrical conductivity (σ). The imaginary part of permittivity (ε') has a maximum at 10o S/cm with the increase of a, and the real part of permeability (μ') changes slightly with the increase of a. When a is at the range of 10-4 S/cm to 10o S/cm (a semi conductive state), both the imagine part of permittivity and permeability raises with increasing a, therefore, the 3DRCs present their high electromagnetic loss properties.
基金financially supported by the National Natural Science Foundation of China(No.52122106)the Key Research and Development Program of Zhejiang Province(Nos.2021C01033 and 2021C01193)。
文摘The emergence of wearable and foldable electronic devices urges advanced electromagnetic(EM)wave absorbers with maintained performance under deformation.Here FeCo@MoS_(2)poly vinyl alcohol(PVA)aerogels have been fabricated with the assistance of EM waves for simultaneous splitting of the MoS_(2)flakes and dispersive growth of FeCo nanoparticles.The resultants in-return have been used for EM wave absorption with excellent performance,providing minimum reflection loss(RL_(min))of-40.7 dB and a broad effective absorption bandwidth(EAB)of 6.4 GHz at a thickness of 2.5 mm.Real-time compression has been introduced to reveal the evolution of EM parameters.The aerogels maintain satisfactory performance even under 50%compression due to the balance of impedance matching and attenuation.Despite the deterioration of impedance matching,the attenuation is significantly enhanced due to both strengthened conductive loss and magnetic loss.In addition,features such as lightweight,self-cleaning and refractory can be achieved for the aerogels for applications in complex environments.As such this work not only provides a versatile synthetic route assisted by EM wave energy,but also insights on the evolution of absorption performance under deformation together with the design strategy of multifunctional flexible wave absorbers.
基金the support from the National Natural Science Foundation of China(No.51171033)the Fundamental Research Funds for the Central Universities(DUT15LAB05,DUT16LAB03)
文摘The microwave absorbents of Fe and C nanoparticles as magnetic loss and dielectric loss material respectively were composited with the polyvinyl alcohol(PVA)as binder by spray granulation method,The electromagnetic parameters of Fe and C composite particles were analyzed by vector network.The complex permittivity and magnetic permeability of Fe and C composite particles matched well with increasing C nanoparticle content,and then the microwave loss property was improved.A minimum reflection loss(RL)of-42.7 dB at 3.68 GHz for a composite with 4.6 mm in thickness can be obtained when the content ratio of the C nanoparticles,the modified Fe nanoparticles and the PVA is 21:49:30(Sample 3).
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50701022,51001019,and 50831006)the Program for New Century Excellent Talents of China (Grant No. NCET-08-0278)
文摘We have investigated the magnetic transition and magnetocaloric effects of Mn1＋xCo1-xGe alloys by tuning the ratio of Mn/Co. With increasing Mn content, a series of first-order magnetostructural transitions from ferromagnetic to paramagnetic states with large changes of magnetization are observed at room temperature. Further increasing the content of Mn （x = 0.11） gives rise to a single second-order magnetic transition. Interestingly, large low-field magnetic entropy changes with almost zero magnetic hysteresis are observed in these alloys. The effects of Mn/Co ratio on magnetic transition and magnetocaloric effects are discussed in this paper.
基金Natural Science Foundation of Shandong Province(Nos.ZR2023QE329 and ZR2022ZD09)National Natural Science Foundation of China(Nos.52075524 and 21972153)+1 种基金Youth Innovation Promotion Association of the CAS(2022429)Gansu Province Science and Technology Plan(No.22JR5RA094).
文摘Due to the rapid development of radar technology,the demand for absorbing stealth materials is increas-ing,and ultra-broadband absorption(effective absorption bandwidth>8 GHz)has become an inevitable requirement.As a new type of two-dimensional material,MXene material possesses the characteristics of excellent wave absorbing material due to its easy preparation,easy modulation of defects and sur-face functional groups,and high conductivity.This work summarizes the absorbing theory and research progress on MXene-based absorbing materials in recent years,including pure MXene absorbing materials and MXene-based magnetic or dielectric composite materials with multiple losses.Some shortcomings and research directions of MXene-based materials were pointed out.Currently,research on MXene-based absorbent materials is thriving and in a state of vigorous development.Excellent absorbent materials have been reported,but their shortcomings are also apparent.The factors that affect the performance of MXene-based absorbent materials are complex,and the absorption mechanism is relatively simple.Further systematic and detailed research is needed to clarify these influencing mechanisms,broaden the absorption bandwidth,and reduce the matching thickness to meet practical usage requirements in the future.
基金financially supported by the National Natu-ral Science Foundation of China(Nos.52377026 and 52301192)the Natural Science Foundation of Shandong Province(No.ZR2019YQ24)+3 种基金the Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Re-search and Innovation Team of Structural-Functional Polymer Com-posites)the Special Financial of Shandong Province(Structural De-sign of High-efficiency Electromagnetic Wave-absorbing Composite Materials and Construction of Shandong Provincial Talent Teams)the“Sanqin Scholars”Innovation Teams Project of Shaanxi Province(Clean Energy Materials and High-Performance Devices Innovation Team of Shaanxi Dongling Smelting Co.,Ltd.).
文摘Subtle microstructure design and an appropriate multicomponent strategy are essential for advanced electromagnetic absorbing(EMA)materials with a wide effective absorption bandwidth(EAB)and intense absorption.However,sophisticated environments restrict the range of applications for EMA materials.Herein,three hollow spherical bifunctional CoSx/MnS/C nanocomposites with different crystal structures were constructed via cation exchange and subsequent vulcanization.The manganese sulfide and carbon generated during vulcanization exhibit a narrow band gap and enhanced conductivity,thereby facilitating conductive loss.The presence of cobalt sulfide facilitates the improvement of magnetic loss.More importantly,there is a potential difference between different phases at the heterogeneous interface,resulting in a region of space charge,which is conducive to interfacial polarization.The 3D hollow structure and heterogeneous dielectric/magnetic interfaces benefit the predominant EMA performance by forming perfect impedance matching,interface polarization,conduction loss,and magnetic loss effects.Specifically,an optimal reflection loss(RL)of-51.31 dB at 10.72 GHz and an effective EAB of 5.92 GHz at 2.1 mm can be achieved for Co_(1-x) S/MnS/C nanocomposite.Moreover,the nanocomposites maintained promising self-anticorrosion properties in simulated seawater environments.Transition metal sulfides with superior self-anticorrosion properties provide a pathway to efficient wave-absorbing materials in complicated environments.
基金supported by the National Natural Science Foundation of China(No.U2004177)the Henan Province Science and Technology Research and Development Project in 2020,China(No.202300410491)the Key Scientific Research Projects of Provincial Universities in 2021,China(No.21A430045)。
文摘With the gradually increasing protection awareness about electromagnetic pollution,the demand for absorbing materials with renewability and environmental friendliness has attracted widespread attention.In this work,composites consisting of straw-derived biochar combined with NiCo alloy were successfully fabricated through high-temperature carbonization and subsequent hydrothermal reaction.The electromagnetic parameters of the porous biocarbon/NiCo composites can be effectively modified by altering their NiCo content,and their improved absorbing performance can be attributed to the synergy effect of magnetic-dielectric characteristics.An exceptional reflection loss of-27.0 dB at 2.2 mm thickness and an effective absorption bandwidth of 4.4 GHz(11.7-16.1 GHz)were achieved.These results revealed that the porous biocarbon/NiCo composites could be used as a new generation absorbing material because of their low density,light weight,excellent conductivity,and strong absorption.
基金financially supported by Natural Science Foundation of Fujian Province(Nos.2021T3024,2021H0017 and 2022H0016)。
文摘Biomass absorbing materials have received increasing attention for electromagnetic wave(EMW)absorption field absorbing materials due to its low density and high dielectric loss.However,the biomass EMW absorbing materials often suffer from the insufficient magnetic loss and impedance matching.In this work,a facile ZIF-8/ZIF-67-derived biomass composites(CoZnO@BPC)was prepared for high-performance EMW absorption based on multi-component micro,nano structures metal particles and xanthoce sorbifolia bunge shells-derived biomass porous carbon(BPC).The dielectric loss and/or magnetic loss abilities of CoZnO@BPC composites were adjusted by changing the mass ratio of Zn^(2+)to Co^(2+)ions.Under the filled amount of 20 wt%,Co Zn O@BPC exhibited excellent EMW absorption with the minimum reflection loss(RL)at 15.84 GHz is-50.2 dB,and the matching thickness is only 1.7 mm.By adjusting the ZIFs mass ratio,the effective absorption bandwidth(EAB)can be up to 5.92 GHz(from 12.08 GHz to 18 GHz),and the matching thickness is only 1.9 mm.The results provide a new insight for the economical and efficient preparation of lightweight and advanced microwave absorbing materials.
