Hydraulic theory predicts a positive coupling between leaf hydraulic conductance(K_(leaf))and stomatal conductance(g_(s));however,this theory has not been fully supported by observations,and underlying mechanisms are ...Hydraulic theory predicts a positive coupling between leaf hydraulic conductance(K_(leaf))and stomatal conductance(g_(s));however,this theory has not been fully supported by observations,and underlying mechanisms are poorly understood.Partitioning K_(leaf)into inside-xylem(K_(x))and outside-xylem(K_(ox))components offers a refined framework for elucidating the regulation of g_(s) by leaf hydraulics.While optimal planting density may enhance water use efficiency(WUE)through modulation of g_(s),corresponding changes in leaf hydraulic properties and their influence on gas exchange remain unclear.We examined relationships among K_(x),K_(ox),g_(s),leaf photosynthetic rate(A_(N)),and WUE,and analyzed the structural determinants of K_(ox)in cotton grown under eight planting densities:12,18,24,36,48,60,72,and 84 plants m^(–2).Results showed that as planting density increased,K_(leaf)and A_(N) remained stable,whereas K_(ox)and g_(s) declined significantly.Leaf thickness and the volume fraction of inter-cellular air space were key structural factors influencing K_(ox).Neither K_(leaf)nor K_(x)correlated with A_(N) or g_(s);however,K_(ox)exhibited a significant positive correlation with g_(s).Furthermore,K_(ox)was negatively correlated with WUE.These findings indicate that K_(ox)modulates g_(s) to minimize water loss without compromising A_(N),thereby enhancing WUE in cotton across varying planting densities.展开更多
Proton exchange membrane(PEM)is an integral component in fuel cells which enables proton transport for efficient energy conversion.Sulfonated Polyether Ether Ketone(SPEEK)has emerged as a cost-effective option with no...Proton exchange membrane(PEM)is an integral component in fuel cells which enables proton transport for efficient energy conversion.Sulfonated Polyether Ether Ketone(SPEEK)has emerged as a cost-effective option with non-fluorinated aromatic backbones for Proton Exchange Membrane Fuel Cell(PEMFC)applications,even though it exhibits lower proton conductivity compared to Nafion.This work aims to study the influence of Sulfonated Chitosan(SCS)concentrations on proton conductivity of SPEEK-based PEM at room temperature.SPEEK was synthesized using a sulfonation process with concentrated sulfuric acid at room temperature.SCS was synthesized via reflux of CS and 1.2 M H2SO4 with a ratio of 1:35(w/v)at 90℃ for 30 min.The composite membranes of SPEEK-SCS were formed with four different SCS concentrations,using the solution castingmethod,andDimethyl Sulfoxide(DMSO)was used as a solvent.The composite membranes synthesized include pure SPEEK(S0),SPEEK with 1%SCS(S1),SPEEK with 2%SCS(S2),and SPEEK with 3%SCS(S3).Fourier transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),water uptake,degree of swelling,Ionic exchange capacity(IEC)with Electrochemical impedance spectroscopy(EIS)were used to characterize the composite membranes in terms of composition,crystallinity,water absorption,dimensional changes,number of exchangeable ions in membranes,and proton conductivity,respectively.Notably,S3 had the highest water uptake and the lowest degree of swelling.S2 had the highest proton conductivity among the SPEEK-SCS composite membranes at room temperature with 3.44×10^(−2) Scm^(-1).展开更多
MXene is a promising conductive nanofiller for hydrogels due to its excellent electricity conductivity and water dispersibility.However,MXene is prone to oxidize in the presence of air and water,resulting in a signifi...MXene is a promising conductive nanofiller for hydrogels due to its excellent electricity conductivity and water dispersibility.However,MXene is prone to oxidize in the presence of air and water,resulting in a significant loss of conductivity.Polydopamine(PDA)has been coated on MXene to enhance its antioxidation stability via the physical barrier and chemical reducing ability of PDA,which unavoidably causes severe aggregation and a significant decrease in conductivity due to the crosslinking and insulation of PDA.Herein,we propose a facile strategy to construct a highly conductive,stable,and self-healing MXene-based polyvinyl alcohol(PVA)hydrogel by a controlled assembly of PDA and cellulose nanocrystal(CNC).PDA is first formed by oxidation self-polymerization in PVA solution without the presence of CNC and MXene,which can effectively reduce the content of aggregation-inducing groups and avoid the formation of an insulating PDA layer on the surface of MXene.The addition of CNCs results in the easy dispersion of a high content of MXene via hydrogen bonding and electrostatic interactions.The PVA-PDA hydrogel with MXene and CNC as conductive and reinforcing nanofillers(PP-CM)is cross-linked by dynamic borax covalent bonds and shows a conductivity of 7.14 S m^(-1).The introduction of PDA effectively protects MXene and results in only a 14%decrease in conductivity after 7 days,significantly improving antioxidant stability.This hydrogel also possesses rapid self-healing capabilities,achieving 90.5%self-healing efficiency within 10 min.This versatile approach opens new avenues for the preparation and application of MXene-based conductive hydrogels.展开更多
With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivit...With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.展开更多
The thermal conductivity of nanofluids is an important property that influences the heat transfer capabilities of nanofluids.Researchers rely on experimental investigations to explore nanofluid properties,as it is a n...The thermal conductivity of nanofluids is an important property that influences the heat transfer capabilities of nanofluids.Researchers rely on experimental investigations to explore nanofluid properties,as it is a necessary step before their practical application.As these investigations are time and resource-consuming undertakings,an effective prediction model can significantly improve the efficiency of research operations.In this work,an Artificial Neural Network(ANN)model is developed to predict the thermal conductivity of metal oxide water-based nanofluid.For this,a comprehensive set of 691 data points was collected from the literature.This dataset is split into training(70%),validation(15%),and testing(15%)and used to train the ANN model.The developed model is a backpropagation artificial neural network with a 4–12–1 architecture.The performance of the developed model shows high accuracy with R values above 0.90 and rapid convergence.It shows that the developed ANN model accurately predicts the thermal conductivity of nanofluids.展开更多
This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic fie...This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.展开更多
Conducting hydrogels have garnered significant interest in the field of wearable electronics.However,simultaneously achieving high transparency,high conductivity,strong adhesion,and self-healing ability within a short...Conducting hydrogels have garnered significant interest in the field of wearable electronics.However,simultaneously achieving high transparency,high conductivity,strong adhesion,and self-healing ability within a short time remains a major challenge.In this study,a multifunctional mussel-inspired hydrogel was synthesized in only 5 min,with polydopamine(PDA)-polypyrrole(Ppy)-polyaniline(PANi)and poly(vinyl alcohol)(PVA)nanoparticles incorporated into the polyacrylamide(PAM)network.The resulting hydrogel exhibited high transparency(about 90% light transmission in the range of 400-800 nm),high conductivity((95.4±0.4)×10^(-4)S/cm),tensile strength(32.60±1.03 k Pa),strain at break(904.46%±11.50%),and adhesive strength(30-60 k Pa).It also demonstrated rapid self-healing properties(about 48% strength recovery within 1h at 50℃)and water-dependent shape memory behavior.As a wearable strain sensor,the hydrogel successfully detected finger flexion,wrist movements,facial expression changes,and breathing with high sensitivity and stability.The calculated gauge factor(GF)was 7.44±0.31,which is higher than that of many previously reported hydrogels.Compared with previous oyster-inspired or Ppy-based hydrogels,our system showed a much shorter synthesis time,higher transparency,and enhanced multifunctionality.These findings highlight the potential of the proposed hydrogel for next-generation flexible electronics,e-skin,and biomedical monitoring devices.展开更多
There is an urgent need to develop magnesium-matrix materials that exhibit both high thermal conductivity and low thermal expansion to ensure compatibility with chips.This study aims to develop a Mg-Zn-Cu alloy with h...There is an urgent need to develop magnesium-matrix materials that exhibit both high thermal conductivity and low thermal expansion to ensure compatibility with chips.This study aims to develop a Mg-Zn-Cu alloy with high thermal conductivity.Furthermore,it explores the preparation of AlN_(P)/Mg-Zn-Cu composites featuring low coefficients of thermal expansion.The stir casting method was utilized to fabricate the composites and an investigation was conducted to examine their microstructure and thermal properties.Results indicate that the addition of AlN_(P)reduces the thermal expansion coefficient while maintaining relatively high thermal conductivity.Specifically,the AlN_(P)/Mg-0.5Zn-0.5Cu composite with 30wt.%AlN_(P)achieves a thermal conductivity of 132.7 W·m^(-1)·K^(-1)and a thermal expansion coefficient of 18.5×10^(-6)K^(-1),rendering it suitable for electronic packaging applications where thermal management is critical.展开更多
This study investigates the effect of BaHfO_(3)(BHO)addition on the optical properties of YBa_2Cu_(3)O_(7-δ)(YBCO)superconducting thin films using spectroscopic ellipsometry.Through Raman spectroscopy and SEM analysi...This study investigates the effect of BaHfO_(3)(BHO)addition on the optical properties of YBa_2Cu_(3)O_(7-δ)(YBCO)superconducting thin films using spectroscopic ellipsometry.Through Raman spectroscopy and SEM analysis,optimal 10-min Ar ion etching effectively removes surface a-axis-oriented grains and Ba–Cu–O impurities,enhancing surface quality.Optical conductivity analysis reveals a doping-dependent evolution:10%BHO doping maximizes free carrier density and interband transition efficiency,attributed to optimized Cu–O bond contraction and reduced lattice distortions.Higher doping induces defect clustering,carrier scattering,and redshifted transitions due to lattice expansion.Dielectric function and loss function analyses confirm enhanced plasmonic behavior and flux pinning at 10%doping,while excessive doping degrades electronic transitions.These results highlight the critical role of controlled BHO addition and surface treatment in tailoring the optical and superconducting properties of YBCO,offering insights into the interplay among doping,carrier dynamics,and electronic structure in high-temperature superconductors(HTS).展开更多
Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharid...Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharide hydrogels with good mechanical properties.MCA-Li Cl hydrogels were prepared by introducing methacrylated hyaluronic acid(Me HA)into the polymer network in the presence of acrylic acid(AA),acryloyloxyethyltrimethyl ammonium chloride(CATAC),and metal ions.The polymer network not only has a chemically cross-linked network and a tough network structure,but also benefits from a variety of supramolecular interactions,such as hydrogen bonding and coordination covalent bonding,resulting in excellent mechanical properties,with an elongation at break of 1390%,a tensile strength of up to 1200 k Pa,a toughness of 9.4546 MJ/m^(3),and adhesive properties towards various substrates.At the same time,the hydrogel has a high conductivity(5.33 mS/cm)and high strain-sensing sensitivity(Gauge factor=2.55).The flexible strain sensor assembled from the prepared MCA-Li Cl hydrogel can be used to detect human movements,from micro-expressions(smiles,swallowing)to pulse signals and other physiological activities,as well as large-scale joint movements(wrists,elbows,knees,fingers,etc.),realizing the real-time monitoring of full-scale human movements.The prepared hydrogels have potential applications in wearable devices,electronic skin,and strain-sensor components.展开更多
Hydrochloric acid(HCl)extensively exists in deep underground projects,arising from the transportation of industrial raw materials or fracturing fluids of petroleum engineering.It results in corrosion,which can signifi...Hydrochloric acid(HCl)extensively exists in deep underground projects,arising from the transportation of industrial raw materials or fracturing fluids of petroleum engineering.It results in corrosion,which can significantly impact the stability of surrounding rock structures.Therefore,in-depth analysis of the degradation of rock corroded by the HCl solution is an essential task for underground engineering.In this study,the granite specimens are initially treated with the HCl solution with various concentrations.Then,the tests and analyses,such as electrical conductivity(EC)measurements,mineral composition assays,and Brazilian splitting tests,are employed to investigate the corrosion mechanism of the HCl solution.Our results and findings are generally as follows:(1)As the immersion time increases,the EC exhibits a relatively high level at pH value of 1,a decreasing trend at pH value of 3,and an increasing trend at pH value of 5 and 7.(2)The HCl solutions with various concentration have different effect on mineral composition,characterized by an increase in proportion of SiO_(2) and a reduction in proportion of Na_(2)O,Al_(2)O_(3),K_(2)O,MgO,and CaO,as the solution pH value decreases.(3)After immersion in the solutions with pH values of 1,3,and 5,the tensile strength of the granite decreases by 23.85%,20.84%,and 20.24%;the average stiffness of the specimen decreases by 29.29%,23.43%,and 11.97%;the proportion of releasable energy increases by 6%,4%,and -2%;the releasable energy decreases by 54.96%,26.09%,and 14.52%;and the dissipated energy decreases by approximately 68.85%,41.39%,and 5.41%,respectively.(4)The evolution of physical and mechanical properties of the immersed granite specimen can be analyzed from a chemical aspect.The corrosive action of HCl cleaves Si–O and Al–O chemical bonds within the granite,particularly altering the tetrahedral structures of its silicate components.This process involves breaking existing chemical bonds and the formation of new ones,ultimately destroying the silicate molecular structures.As the concentration of HCl increases,the rate of these reactions accelerates,progressively weakening the chemical bonds and consequently deteriorating the mechanical characteristics of the granite.These findings can deepen our knowledge about the corrosion effect of HCI solutions on natural surrounding rocks and serve as references for further research on rock corrosion mechanisms in underground engineering.展开更多
The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing...The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing applications has been limited by inherent challenges such as high electrical resistivity,poor aging resistance,and interfacial incompatibility.To address these limitations,hydroxyl-terminated polybutadiene(HTPB)-based polyurethane was chemically modified with acetylferrocene-polyaniline conductive moieties to enhance charge transport properties.Remarkably,this covalent functionalization endowed the resulting ferrocene-polyaniline hybrid polyurethane(FPHP)with a conductivity of2.33 n A at 1 V bias while preserving piezoresistive functionality.The FPHP demonstrated exceptional mechanical-electrical performance,achieving 254% elongation at break with strain-dependent gauge factors of 7.28(0%-12.5% strain,R^(2)=0.9504)and 19.66(12.5%-35.0% strain,R^(2)=0.9929).Further characterization revealed a rapid 0.60 s response time and stability over 3500 strain-release cycles at compression strain,underscoring its durability under repetitive loading.The FPHP sensor was capable of monitoring various human movements and recognizing writing signals.These advances establish a materials design paradigm for fabricating flexible sensors that synergistically integrate high deformability,tunable sensitivity,and robust operational stability,positioning FPHP as a promising candidate for next-generation wearable electronics and soft robotics.展开更多
Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the s...Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the structural coloration of Cyanocitta stelleri feathers,we developed a dual-mode sensor by utilizing black conductive polymer hydrogel(CPH)-enhanced structural color strategy.This sensor integrates a hydroxypropyl cellulose(HPC)-based structural color interface with a designed CPH sensing component.Highly visible light-absorbing CPH(absorption rate>88%)serves as the critical substrate for enhancing structural color performance.By absorbing incoherent scattered light and suppressing background interference,it significantly enhances the saturation of structural color,thereby achieving a high contrast index of 4.92.Unlike the faint and hardly visible structural colors on non-black substrates,the HPC on CPH displays vivid,highly perceptible colors and desirable mechanochromic behavior.Moreover,the CPH acts as a flexible sensing element,fortified by hydrogen and coordination bond networks,and exhibits exceptional electromechanical properties,including 867.1 kPa tensile strength,strain sensitivity(gauge factor of 4.24),and outstanding durability(over 4400 cycles).Compared to traditional single-mode sensors,the integrated sensor provides real-time visual and digital dual feedback,enhancing the accuracy and interactivity of rehabilitation assessments.This technology holds promise for advancing next-generation rehabilitation medicine.展开更多
In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(...In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.展开更多
Ion conduction in covalent-organic framework(COF)membranes is vital for energy conversion and storage.Conventional phenomenological methods based on the Arrhenius equation offer micrometer-scale cognition of ion condu...Ion conduction in covalent-organic framework(COF)membranes is vital for energy conversion and storage.Conventional phenomenological methods based on the Arrhenius equation offer micrometer-scale cognition of ion conduction,whereas they ignore atomic details of ion-pore interactions and sophisticated conduction mechanisms,leaving gaps in high-resolution and bottom-up understanding of ion conduction in a nanoconfined space.In this study,we develop a hierarchical approach by holistically synergizing electronic structure calculations,first-principles molecular dynamics simulations,and thermodynamic integration methods to investigate the conduction of chloride(Cl^(-))and hydroxide(OH^(-))ions in a COF membrane.It is revealed that Cl^(-)ion with symmetric charge distribution undergoes weak solvation and tight ion-pore binding,which results in a tortuous conduction pathway,a high energy barrier,and slow diffusion based on the vehicular mechanism.In remarkable contrast,OH^(-)ion with heterogeneous charge distribution features strong solvation and weak ion-pore binding,and it jumps frequently via a smooth pathway and a low energy barrier.Moreover,OH^(-)ion conduction follows a mixed vehicular and Grotthuss mechanism,causing highly mutable ion identity and number,as well as superior dynamics due to proton transfer.This hierarchical approach provides sub-nanometer resolution insights into ion conduction,guiding intelligent membrane design and performance regulation to control ion conduction for emerging applications.展开更多
The random distribution of one-dimensional nanofillers in composite polymer electrolytes(CPEs) typically results in tortuous ion transport pathways,severely limiting ionic conductivity and Li^(+) flux uniformity.Herei...The random distribution of one-dimensional nanofillers in composite polymer electrolytes(CPEs) typically results in tortuous ion transport pathways,severely limiting ionic conductivity and Li^(+) flux uniformity.Herein,an innovative electric field-assisted strategy is proposed to construct vertically aligned ion channels in CPEs using lithiated halloysite nano tubes(HNTs-SO_(3)Li)embedded within a polyurethane acrylate/polyethylene glycol diacrylate(PUA/PEGDA) matrix.Under an alternating electric field,the nanotubes orient perpendicularly,forming continuous,low-tortuosity pathways that significantly enhance roomtemperature ionic conductivity.The aligned structure not only shortens Li+transport distances but also homogenizes ion flux at the electrode interface,effectively suppressing lithium dendrite growth.Electrochemical characterization reveals exceptional stability.Three-dimensional structural reconstruction and ion transport simulations further demonstrate that the ordered channels promote uniform Li+distribution and faster ion kinetics compared to disordered systems.This study provides a scalable and efficient approach to designing high-performance CPEs for next-generation solid-state batteries,addressing critical challenges in ionic conductivity,interfacial stability,and dendrite suppression.展开更多
This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and...This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.展开更多
An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximatio...An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximation,forming a spectral-integrated neural network(SINN)scheme tailored for problems characterized by long-time evolution.Temporal derivatives are treated through a spectral integration strategy based on orthogonal polynomial expansions,which significantly alleviates stability constraints associated with conventional time-marching schemes.A fully connected neural network is employed to approximate the temperature-related variables,while governing equa-tions and boundary conditions are enforced through a physics-informed loss formulation.Numerical investigations demonstrate that the proposed method maintains high accuracy even when large time steps are adopted,where standard numerical solvers often suffer from instability or excessive computational cost.Moreover,the framework exhibits strong robustness for ultrathin configurations with extreme aspect ratios,achieving relative errors on the order of 10−5 or lower.These results indicate that the SINN framework provides a reliable and efficient alternative for transient thermal analysis of thin-walled structures under challenging computational conditions.展开更多
Piezoelectric semiconductor(PSC)materials exhibit strong electromechanical coupling affected by free carriers,which makes their contact behavior essential for sensors,actuators,and electronic devices.Analytical models...Piezoelectric semiconductor(PSC)materials exhibit strong electromechanical coupling affected by free carriers,which makes their contact behavior essential for sensors,actuators,and electronic devices.Analytical models for three-dimensional(3D)PSC contact problems are still scarce,especially for conductive indenters.This work develops a semi-analytical framework to study the 3D frictionless contact between a conductive indenter and a PSC half-space.Fundamental solutions under a unit force and a unit electric charge are derived,and the corresponding frequency response functions are combined with a discrete convolution-fast Fourier transform(DC-FFT)algorithm to achieve an efficient semi-analytical contact model.The numerical results demonstrate that an increase in the surface charge density reduces the indentation pressure and modifies the electric potential distribution.A higher steady carrier concentration enhances the screening effect,suppresses the electromechanical coupling,and shifts the system response toward purely elastic behaviors.The sensitivity analysis shows that the indentation depth is dominated by the elastic constants,while the electric potential is mainly affected by the piezoelectric coefficient.Although the analysis is carried out with spherical indenters,the model is not limited to a specific indenter shape.It provides an effective tool for investigating complex 3D PSC contact problems and offers useful insights into the design of PSC materials-based devices.展开更多
The structural design and performance characteristics of the diaphragm have a decisive impact on the safety and electrochemical performance of lithium-ion batteries(LIBs).However,traditional polyolefin diaphragms stil...The structural design and performance characteristics of the diaphragm have a decisive impact on the safety and electrochemical performance of lithium-ion batteries(LIBs).However,traditional polyolefin diaphragms still face challenges in simultaneously improving the ion transport efficiency and thermal stability.Here,we report an in situ dynamic lithium compensation strategy for manufacturing a biobased furan aramid/ceramic diaphragm(BAS)with higher thermal stability and ion transport efficiency.Specifically,exchangeable carboxyl groups(–COOH)are introduced into the bio-based furan aramid(BA)framework,which are in situ converted into–COOLi groups to form lithium ions(Li^(+))transport channels,achieving dynamic compensation of active Li^(+).The dual transmission system of ion exchange and physical pore channels synergistically enhances the ionic conductivity of BAS to 1.536 mS cm^(-1).The high polarity structure of the furan ring and the electrolyte have excellent compatibility,significantly reducing the solid–liquid interfacial energy,making BAS have extremely high electrolyte wettability(contact angle of 0°).The BA amide group forms a multi-scale bonding network with the nano-ceramics.The BAS prepared by the water-coating process exhibits excellent thermal stability(with a thermal shrinkage rate of less than 1%after 1 h at 150℃).The LiFePO_(4)|Li half-cell assembled with BAS shows a capacity retention rate of up to 91.7%after 280 cycles at 1C,with a Coulomb efficiency of 99%,demonstrating excellent cycling stability.This design and development based on bio-materials provides a new approach for high safety and high energy density battery systems.展开更多
基金financially supported by the Tianshan Talent Development Program,China for Yali Zhangthe Natural Science Foundation of Xinjiang Production and Construction Corps,China(2024DA002)the Earmarked Fund for XJARS-Cotton,China(XJARS-03)。
文摘Hydraulic theory predicts a positive coupling between leaf hydraulic conductance(K_(leaf))and stomatal conductance(g_(s));however,this theory has not been fully supported by observations,and underlying mechanisms are poorly understood.Partitioning K_(leaf)into inside-xylem(K_(x))and outside-xylem(K_(ox))components offers a refined framework for elucidating the regulation of g_(s) by leaf hydraulics.While optimal planting density may enhance water use efficiency(WUE)through modulation of g_(s),corresponding changes in leaf hydraulic properties and their influence on gas exchange remain unclear.We examined relationships among K_(x),K_(ox),g_(s),leaf photosynthetic rate(A_(N)),and WUE,and analyzed the structural determinants of K_(ox)in cotton grown under eight planting densities:12,18,24,36,48,60,72,and 84 plants m^(–2).Results showed that as planting density increased,K_(leaf)and A_(N) remained stable,whereas K_(ox)and g_(s) declined significantly.Leaf thickness and the volume fraction of inter-cellular air space were key structural factors influencing K_(ox).Neither K_(leaf)nor K_(x)correlated with A_(N) or g_(s);however,K_(ox)exhibited a significant positive correlation with g_(s).Furthermore,K_(ox)was negatively correlated with WUE.These findings indicate that K_(ox)modulates g_(s) to minimize water loss without compromising A_(N),thereby enhancing WUE in cotton across varying planting densities.
文摘Proton exchange membrane(PEM)is an integral component in fuel cells which enables proton transport for efficient energy conversion.Sulfonated Polyether Ether Ketone(SPEEK)has emerged as a cost-effective option with non-fluorinated aromatic backbones for Proton Exchange Membrane Fuel Cell(PEMFC)applications,even though it exhibits lower proton conductivity compared to Nafion.This work aims to study the influence of Sulfonated Chitosan(SCS)concentrations on proton conductivity of SPEEK-based PEM at room temperature.SPEEK was synthesized using a sulfonation process with concentrated sulfuric acid at room temperature.SCS was synthesized via reflux of CS and 1.2 M H2SO4 with a ratio of 1:35(w/v)at 90℃ for 30 min.The composite membranes of SPEEK-SCS were formed with four different SCS concentrations,using the solution castingmethod,andDimethyl Sulfoxide(DMSO)was used as a solvent.The composite membranes synthesized include pure SPEEK(S0),SPEEK with 1%SCS(S1),SPEEK with 2%SCS(S2),and SPEEK with 3%SCS(S3).Fourier transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),water uptake,degree of swelling,Ionic exchange capacity(IEC)with Electrochemical impedance spectroscopy(EIS)were used to characterize the composite membranes in terms of composition,crystallinity,water absorption,dimensional changes,number of exchangeable ions in membranes,and proton conductivity,respectively.Notably,S3 had the highest water uptake and the lowest degree of swelling.S2 had the highest proton conductivity among the SPEEK-SCS composite membranes at room temperature with 3.44×10^(−2) Scm^(-1).
基金support from Youth Promotion of Guangdong Natural Science Foundation(2024A1515030005)Guangdong Province Ordinary Universities Characteristic Innovation Project(2024KTSCX096)+4 种基金Guangdong Province University Key Field Special Program(2023ZDZX3002)Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education)Naikai University,Guangdong Provincial Key Laboratory of Optical Information Materials and Technology(No.2023B1212060065)Programs of Science and Technology Department of Yunnan Province(202301AT070217)MOE International Laboratory for Optical Information Technologies,the 111 Project,Science and Technology Bureau of Huzhou(2022GG24)ScienceK Ltd.
文摘MXene is a promising conductive nanofiller for hydrogels due to its excellent electricity conductivity and water dispersibility.However,MXene is prone to oxidize in the presence of air and water,resulting in a significant loss of conductivity.Polydopamine(PDA)has been coated on MXene to enhance its antioxidation stability via the physical barrier and chemical reducing ability of PDA,which unavoidably causes severe aggregation and a significant decrease in conductivity due to the crosslinking and insulation of PDA.Herein,we propose a facile strategy to construct a highly conductive,stable,and self-healing MXene-based polyvinyl alcohol(PVA)hydrogel by a controlled assembly of PDA and cellulose nanocrystal(CNC).PDA is first formed by oxidation self-polymerization in PVA solution without the presence of CNC and MXene,which can effectively reduce the content of aggregation-inducing groups and avoid the formation of an insulating PDA layer on the surface of MXene.The addition of CNCs results in the easy dispersion of a high content of MXene via hydrogen bonding and electrostatic interactions.The PVA-PDA hydrogel with MXene and CNC as conductive and reinforcing nanofillers(PP-CM)is cross-linked by dynamic borax covalent bonds and shows a conductivity of 7.14 S m^(-1).The introduction of PDA effectively protects MXene and results in only a 14%decrease in conductivity after 7 days,significantly improving antioxidant stability.This hydrogel also possesses rapid self-healing capabilities,achieving 90.5%self-healing efficiency within 10 min.This versatile approach opens new avenues for the preparation and application of MXene-based conductive hydrogels.
基金the support from the National Natural Science Foundation of China(52473083,52373089,52403085)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Natural Science Basic Research Plan in Shaanxi Province of China(2024JC-YBMS-279)Natural Science Foundation of Chongqing,China(2023NSCQMSX2547)
文摘With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2021R1A6A1A10044950).
文摘The thermal conductivity of nanofluids is an important property that influences the heat transfer capabilities of nanofluids.Researchers rely on experimental investigations to explore nanofluid properties,as it is a necessary step before their practical application.As these investigations are time and resource-consuming undertakings,an effective prediction model can significantly improve the efficiency of research operations.In this work,an Artificial Neural Network(ANN)model is developed to predict the thermal conductivity of metal oxide water-based nanofluid.For this,a comprehensive set of 691 data points was collected from the literature.This dataset is split into training(70%),validation(15%),and testing(15%)and used to train the ANN model.The developed model is a backpropagation artificial neural network with a 4–12–1 architecture.The performance of the developed model shows high accuracy with R values above 0.90 and rapid convergence.It shows that the developed ANN model accurately predicts the thermal conductivity of nanofluids.
基金supported by the National Natural Science Foundation of China(12401279,12371219)the Academic and Technical Leaders Training Plan of Jiangxi Province(20212BCJ23027).
文摘This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.
文摘Conducting hydrogels have garnered significant interest in the field of wearable electronics.However,simultaneously achieving high transparency,high conductivity,strong adhesion,and self-healing ability within a short time remains a major challenge.In this study,a multifunctional mussel-inspired hydrogel was synthesized in only 5 min,with polydopamine(PDA)-polypyrrole(Ppy)-polyaniline(PANi)and poly(vinyl alcohol)(PVA)nanoparticles incorporated into the polyacrylamide(PAM)network.The resulting hydrogel exhibited high transparency(about 90% light transmission in the range of 400-800 nm),high conductivity((95.4±0.4)×10^(-4)S/cm),tensile strength(32.60±1.03 k Pa),strain at break(904.46%±11.50%),and adhesive strength(30-60 k Pa).It also demonstrated rapid self-healing properties(about 48% strength recovery within 1h at 50℃)and water-dependent shape memory behavior.As a wearable strain sensor,the hydrogel successfully detected finger flexion,wrist movements,facial expression changes,and breathing with high sensitivity and stability.The calculated gauge factor(GF)was 7.44±0.31,which is higher than that of many previously reported hydrogels.Compared with previous oyster-inspired or Ppy-based hydrogels,our system showed a much shorter synthesis time,higher transparency,and enhanced multifunctionality.These findings highlight the potential of the proposed hydrogel for next-generation flexible electronics,e-skin,and biomedical monitoring devices.
基金financially supported by National Natural Science Foundation of China(No.52175321)the Fund of Key Laboratory of High Temperature Electromagnetic Materials and Structure of MOE(No.KB202505)。
文摘There is an urgent need to develop magnesium-matrix materials that exhibit both high thermal conductivity and low thermal expansion to ensure compatibility with chips.This study aims to develop a Mg-Zn-Cu alloy with high thermal conductivity.Furthermore,it explores the preparation of AlN_(P)/Mg-Zn-Cu composites featuring low coefficients of thermal expansion.The stir casting method was utilized to fabricate the composites and an investigation was conducted to examine their microstructure and thermal properties.Results indicate that the addition of AlN_(P)reduces the thermal expansion coefficient while maintaining relatively high thermal conductivity.Specifically,the AlN_(P)/Mg-0.5Zn-0.5Cu composite with 30wt.%AlN_(P)achieves a thermal conductivity of 132.7 W·m^(-1)·K^(-1)and a thermal expansion coefficient of 18.5×10^(-6)K^(-1),rendering it suitable for electronic packaging applications where thermal management is critical.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52172271,12374378,52307026,and 52477022)the National Key Research and Development Program of China(Grant No.2022YFE03150200)Shanghai Science and Technology Innovation Program(Grant No.23511101600)。
文摘This study investigates the effect of BaHfO_(3)(BHO)addition on the optical properties of YBa_2Cu_(3)O_(7-δ)(YBCO)superconducting thin films using spectroscopic ellipsometry.Through Raman spectroscopy and SEM analysis,optimal 10-min Ar ion etching effectively removes surface a-axis-oriented grains and Ba–Cu–O impurities,enhancing surface quality.Optical conductivity analysis reveals a doping-dependent evolution:10%BHO doping maximizes free carrier density and interband transition efficiency,attributed to optimized Cu–O bond contraction and reduced lattice distortions.Higher doping induces defect clustering,carrier scattering,and redshifted transitions due to lattice expansion.Dielectric function and loss function analyses confirm enhanced plasmonic behavior and flux pinning at 10%doping,while excessive doping degrades electronic transitions.These results highlight the critical role of controlled BHO addition and surface treatment in tailoring the optical and superconducting properties of YBCO,offering insights into the interplay among doping,carrier dynamics,and electronic structure in high-temperature superconductors(HTS).
基金financially supported by the National Natural Science Foundation of China(No.22271074)Natural Science Foundation of Hebei Province(Nos.B2023208042,B2022208032,B2021208066,E2024208084,and E2024208088)+2 种基金Science Research Project of Hebei Education Department(No.JZX2024013)Special Fund for Local Scientific and Technological Development under the Guidance of the Central Government(No.236Z3704G)Hebei Province High Level Talent Funding(No.A202001010)。
文摘Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharide hydrogels with good mechanical properties.MCA-Li Cl hydrogels were prepared by introducing methacrylated hyaluronic acid(Me HA)into the polymer network in the presence of acrylic acid(AA),acryloyloxyethyltrimethyl ammonium chloride(CATAC),and metal ions.The polymer network not only has a chemically cross-linked network and a tough network structure,but also benefits from a variety of supramolecular interactions,such as hydrogen bonding and coordination covalent bonding,resulting in excellent mechanical properties,with an elongation at break of 1390%,a tensile strength of up to 1200 k Pa,a toughness of 9.4546 MJ/m^(3),and adhesive properties towards various substrates.At the same time,the hydrogel has a high conductivity(5.33 mS/cm)and high strain-sensing sensitivity(Gauge factor=2.55).The flexible strain sensor assembled from the prepared MCA-Li Cl hydrogel can be used to detect human movements,from micro-expressions(smiles,swallowing)to pulse signals and other physiological activities,as well as large-scale joint movements(wrists,elbows,knees,fingers,etc.),realizing the real-time monitoring of full-scale human movements.The prepared hydrogels have potential applications in wearable devices,electronic skin,and strain-sensor components.
基金National Science Fund for Distinguished Young Scholars,Grant/Award Number:52225403State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering,Grant/Award Number:SDGZK2404Fundamental Research Funds for the Central Universities,Grant/Award Number:2023KYJD1006。
文摘Hydrochloric acid(HCl)extensively exists in deep underground projects,arising from the transportation of industrial raw materials or fracturing fluids of petroleum engineering.It results in corrosion,which can significantly impact the stability of surrounding rock structures.Therefore,in-depth analysis of the degradation of rock corroded by the HCl solution is an essential task for underground engineering.In this study,the granite specimens are initially treated with the HCl solution with various concentrations.Then,the tests and analyses,such as electrical conductivity(EC)measurements,mineral composition assays,and Brazilian splitting tests,are employed to investigate the corrosion mechanism of the HCl solution.Our results and findings are generally as follows:(1)As the immersion time increases,the EC exhibits a relatively high level at pH value of 1,a decreasing trend at pH value of 3,and an increasing trend at pH value of 5 and 7.(2)The HCl solutions with various concentration have different effect on mineral composition,characterized by an increase in proportion of SiO_(2) and a reduction in proportion of Na_(2)O,Al_(2)O_(3),K_(2)O,MgO,and CaO,as the solution pH value decreases.(3)After immersion in the solutions with pH values of 1,3,and 5,the tensile strength of the granite decreases by 23.85%,20.84%,and 20.24%;the average stiffness of the specimen decreases by 29.29%,23.43%,and 11.97%;the proportion of releasable energy increases by 6%,4%,and -2%;the releasable energy decreases by 54.96%,26.09%,and 14.52%;and the dissipated energy decreases by approximately 68.85%,41.39%,and 5.41%,respectively.(4)The evolution of physical and mechanical properties of the immersed granite specimen can be analyzed from a chemical aspect.The corrosive action of HCl cleaves Si–O and Al–O chemical bonds within the granite,particularly altering the tetrahedral structures of its silicate components.This process involves breaking existing chemical bonds and the formation of new ones,ultimately destroying the silicate molecular structures.As the concentration of HCl increases,the rate of these reactions accelerates,progressively weakening the chemical bonds and consequently deteriorating the mechanical characteristics of the granite.These findings can deepen our knowledge about the corrosion effect of HCI solutions on natural surrounding rocks and serve as references for further research on rock corrosion mechanisms in underground engineering.
文摘The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing applications has been limited by inherent challenges such as high electrical resistivity,poor aging resistance,and interfacial incompatibility.To address these limitations,hydroxyl-terminated polybutadiene(HTPB)-based polyurethane was chemically modified with acetylferrocene-polyaniline conductive moieties to enhance charge transport properties.Remarkably,this covalent functionalization endowed the resulting ferrocene-polyaniline hybrid polyurethane(FPHP)with a conductivity of2.33 n A at 1 V bias while preserving piezoresistive functionality.The FPHP demonstrated exceptional mechanical-electrical performance,achieving 254% elongation at break with strain-dependent gauge factors of 7.28(0%-12.5% strain,R^(2)=0.9504)and 19.66(12.5%-35.0% strain,R^(2)=0.9929).Further characterization revealed a rapid 0.60 s response time and stability over 3500 strain-release cycles at compression strain,underscoring its durability under repetitive loading.The FPHP sensor was capable of monitoring various human movements and recognizing writing signals.These advances establish a materials design paradigm for fabricating flexible sensors that synergistically integrate high deformability,tunable sensitivity,and robust operational stability,positioning FPHP as a promising candidate for next-generation wearable electronics and soft robotics.
基金supported by the Science and Technology Development Fund,Macao SAR(0065/2023/AFJ,0116/2022/A3)the National Natural Science Foundation of China(52402166)+4 种基金the Natural Science Foundation of Guangdong Province(2025A1515011120)the Australian Research Council(DE220100154)the financial support from the Science and Technology Development Fund(FDCT),Macao SAR(No.0149/2022/A),and(No.0046/2024/AFJ)Guangdong Science and Technology Department(2023QN10C305)for this workthe financial support from the National Natural Science Foundation of China(Grant No.22305185)。
文摘Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the structural coloration of Cyanocitta stelleri feathers,we developed a dual-mode sensor by utilizing black conductive polymer hydrogel(CPH)-enhanced structural color strategy.This sensor integrates a hydroxypropyl cellulose(HPC)-based structural color interface with a designed CPH sensing component.Highly visible light-absorbing CPH(absorption rate>88%)serves as the critical substrate for enhancing structural color performance.By absorbing incoherent scattered light and suppressing background interference,it significantly enhances the saturation of structural color,thereby achieving a high contrast index of 4.92.Unlike the faint and hardly visible structural colors on non-black substrates,the HPC on CPH displays vivid,highly perceptible colors and desirable mechanochromic behavior.Moreover,the CPH acts as a flexible sensing element,fortified by hydrogen and coordination bond networks,and exhibits exceptional electromechanical properties,including 867.1 kPa tensile strength,strain sensitivity(gauge factor of 4.24),and outstanding durability(over 4400 cycles).Compared to traditional single-mode sensors,the integrated sensor provides real-time visual and digital dual feedback,enhancing the accuracy and interactivity of rehabilitation assessments.This technology holds promise for advancing next-generation rehabilitation medicine.
基金financially supported by the National Natural Science Foundation of China(No.52103127)the Opening Project of the State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-10)Shaanxi Provincial Science and Technology Department(No.2025GH-YBXM-042).
文摘In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.
基金supported by the National Science Foundation for Distinguished Young Scholars,China(No.52025065)the Key Research and Development Program of Shaanxi,China(No.2023GXLH-016)+3 种基金A*STAR LCER-FI,Singapore projects(LCERFI010015 U2102d2004 and LCERFI01-0033 U2102d2006)the National Research Foundation Singapore(NRF-CRP26-2021RS0002)the China Scholarship Council Program,China(Project ID:202306280178)for financial supportthe support of the Computing Center in Xi’an。
文摘Ion conduction in covalent-organic framework(COF)membranes is vital for energy conversion and storage.Conventional phenomenological methods based on the Arrhenius equation offer micrometer-scale cognition of ion conduction,whereas they ignore atomic details of ion-pore interactions and sophisticated conduction mechanisms,leaving gaps in high-resolution and bottom-up understanding of ion conduction in a nanoconfined space.In this study,we develop a hierarchical approach by holistically synergizing electronic structure calculations,first-principles molecular dynamics simulations,and thermodynamic integration methods to investigate the conduction of chloride(Cl^(-))and hydroxide(OH^(-))ions in a COF membrane.It is revealed that Cl^(-)ion with symmetric charge distribution undergoes weak solvation and tight ion-pore binding,which results in a tortuous conduction pathway,a high energy barrier,and slow diffusion based on the vehicular mechanism.In remarkable contrast,OH^(-)ion with heterogeneous charge distribution features strong solvation and weak ion-pore binding,and it jumps frequently via a smooth pathway and a low energy barrier.Moreover,OH^(-)ion conduction follows a mixed vehicular and Grotthuss mechanism,causing highly mutable ion identity and number,as well as superior dynamics due to proton transfer.This hierarchical approach provides sub-nanometer resolution insights into ion conduction,guiding intelligent membrane design and performance regulation to control ion conduction for emerging applications.
基金the Program of National Key Research and Development of China (No.2022YFB3603702, No. 2023YFC3905301)Hubei Provincial Natural Science Foundation of China (No. 2025AFA025)the Research Fund of Jianghan University (No. 2023KJZX01)。
文摘The random distribution of one-dimensional nanofillers in composite polymer electrolytes(CPEs) typically results in tortuous ion transport pathways,severely limiting ionic conductivity and Li^(+) flux uniformity.Herein,an innovative electric field-assisted strategy is proposed to construct vertically aligned ion channels in CPEs using lithiated halloysite nano tubes(HNTs-SO_(3)Li)embedded within a polyurethane acrylate/polyethylene glycol diacrylate(PUA/PEGDA) matrix.Under an alternating electric field,the nanotubes orient perpendicularly,forming continuous,low-tortuosity pathways that significantly enhance roomtemperature ionic conductivity.The aligned structure not only shortens Li+transport distances but also homogenizes ion flux at the electrode interface,effectively suppressing lithium dendrite growth.Electrochemical characterization reveals exceptional stability.Three-dimensional structural reconstruction and ion transport simulations further demonstrate that the ordered channels promote uniform Li+distribution and faster ion kinetics compared to disordered systems.This study provides a scalable and efficient approach to designing high-performance CPEs for next-generation solid-state batteries,addressing critical challenges in ionic conductivity,interfacial stability,and dendrite suppression.
基金supported by the National Natural Science Foundation of China(Nos.52471156,U20A20274,and 52071158)the China Postdoctoral Science Foundation(Nos.2024M751173 and 2024M752703)+1 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent,China(No.2024ZB229)the Natural Science Foundation of Jiangsu Higher Education Institutions,China(No.24KJB430012).
文摘This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.
基金supported by the National Natural Science Foundation of China(Nos.12422207 and 12372199).
文摘An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximation,forming a spectral-integrated neural network(SINN)scheme tailored for problems characterized by long-time evolution.Temporal derivatives are treated through a spectral integration strategy based on orthogonal polynomial expansions,which significantly alleviates stability constraints associated with conventional time-marching schemes.A fully connected neural network is employed to approximate the temperature-related variables,while governing equa-tions and boundary conditions are enforced through a physics-informed loss formulation.Numerical investigations demonstrate that the proposed method maintains high accuracy even when large time steps are adopted,where standard numerical solvers often suffer from instability or excessive computational cost.Moreover,the framework exhibits strong robustness for ultrathin configurations with extreme aspect ratios,achieving relative errors on the order of 10−5 or lower.These results indicate that the SINN framework provides a reliable and efficient alternative for transient thermal analysis of thin-walled structures under challenging computational conditions.
基金Project supported by the National Natural Science Foundation of China(No.12402113)the Sichuan Science and Technology Program(No.2024NSFSC0037)。
文摘Piezoelectric semiconductor(PSC)materials exhibit strong electromechanical coupling affected by free carriers,which makes their contact behavior essential for sensors,actuators,and electronic devices.Analytical models for three-dimensional(3D)PSC contact problems are still scarce,especially for conductive indenters.This work develops a semi-analytical framework to study the 3D frictionless contact between a conductive indenter and a PSC half-space.Fundamental solutions under a unit force and a unit electric charge are derived,and the corresponding frequency response functions are combined with a discrete convolution-fast Fourier transform(DC-FFT)algorithm to achieve an efficient semi-analytical contact model.The numerical results demonstrate that an increase in the surface charge density reduces the indentation pressure and modifies the electric potential distribution.A higher steady carrier concentration enhances the screening effect,suppresses the electromechanical coupling,and shifts the system response toward purely elastic behaviors.The sensitivity analysis shows that the indentation depth is dominated by the elastic constants,while the electric potential is mainly affected by the piezoelectric coefficient.Although the analysis is carried out with spherical indenters,the model is not limited to a specific indenter shape.It provides an effective tool for investigating complex 3D PSC contact problems and offers useful insights into the design of PSC materials-based devices.
基金the financial support from the National Natural Science Foundation of China(22293011,T2341001)the Major Science and Technology Project of Anhui Province(202203a06020010)+1 种基金the Horizontal Project Provided by Jiangsu Zhuogao New Materials Technology Co.,Ltd.(Td00923003H)Joint Laboratory by China Power Investment Ronghe New Energy Technology Co.,Ltd.and the Central Government Guiding Special Fund Project for Local Science and Technology Development(202407a12020008)。
文摘The structural design and performance characteristics of the diaphragm have a decisive impact on the safety and electrochemical performance of lithium-ion batteries(LIBs).However,traditional polyolefin diaphragms still face challenges in simultaneously improving the ion transport efficiency and thermal stability.Here,we report an in situ dynamic lithium compensation strategy for manufacturing a biobased furan aramid/ceramic diaphragm(BAS)with higher thermal stability and ion transport efficiency.Specifically,exchangeable carboxyl groups(–COOH)are introduced into the bio-based furan aramid(BA)framework,which are in situ converted into–COOLi groups to form lithium ions(Li^(+))transport channels,achieving dynamic compensation of active Li^(+).The dual transmission system of ion exchange and physical pore channels synergistically enhances the ionic conductivity of BAS to 1.536 mS cm^(-1).The high polarity structure of the furan ring and the electrolyte have excellent compatibility,significantly reducing the solid–liquid interfacial energy,making BAS have extremely high electrolyte wettability(contact angle of 0°).The BA amide group forms a multi-scale bonding network with the nano-ceramics.The BAS prepared by the water-coating process exhibits excellent thermal stability(with a thermal shrinkage rate of less than 1%after 1 h at 150℃).The LiFePO_(4)|Li half-cell assembled with BAS shows a capacity retention rate of up to 91.7%after 280 cycles at 1C,with a Coulomb efficiency of 99%,demonstrating excellent cycling stability.This design and development based on bio-materials provides a new approach for high safety and high energy density battery systems.
