The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric di...The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10-7.87s-1 and 10-11.49s-1 with differential stresses of 32.63-63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing’an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean.展开更多
Structural analyses in the northern part of the North Patagonia Massif, in the foliated Caita Co granite and in La Sefia and Pangare mylonites, indicate that the pluton was intruded as a sheet-like body into an openin...Structural analyses in the northern part of the North Patagonia Massif, in the foliated Caita Co granite and in La Sefia and Pangare mylonites, indicate that the pluton was intruded as a sheet-like body into an opening pull-apart structure during the Gondwana Orogeny. Geochronological studies in the massif indicate a first, lower to middle Permian stage of regional deformation, related to movements during indentation tectonics, with emplacement of foliated granites in the western and central areas of the North Patagonian Massif. Between the upper Permian and lower Triassic, evidence indicates emplacement of undeformed granitic bodies in the central part of the North Patagonian Massif. A second pulse of deformation between the middle and upper Triassic is related to the emplacement of the Caita CO granite, the development of mylonitic belts, and the opening of the Los Menucos Basin. During this pulse of deformation, compression direction was from the eastern quadrant.展开更多
Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the...Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.展开更多
On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collec...On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.展开更多
Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especi...Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif,especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that:(1) Diancangshan deep metamorphic rock has experienced early high-temperature leftlateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing;(2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and(3) the fluid is quite active during the syn-tectonic shearing overprinted lowtemperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif.展开更多
A dating of two biotite samples taken from the meso- and low-temperature myloniteswithin the Shangyi-Chicheng fault belt on the north of the North China Craton yields 40Ar/39Ar iso-topic ages of (399 1) Ma and (263 2)...A dating of two biotite samples taken from the meso- and low-temperature myloniteswithin the Shangyi-Chicheng fault belt on the north of the North China Craton yields 40Ar/39Ar iso-topic ages of (399 1) Ma and (263 2) Ma, respectively. These data reflect an Early Devonian deformation and a Late Carboniferous retrograde metamorphism event along the fault, suggesting that the tectonic activities of the North China Craton in Paleozoic should be reconsidered.展开更多
Strain localization processes in the continental crust generate faults and ductile shear zones over a broad range of scales affecting the long-term lithosphere deformation and the mechanical response of faults during ...Strain localization processes in the continental crust generate faults and ductile shear zones over a broad range of scales affecting the long-term lithosphere deformation and the mechanical response of faults during the seismic cycle.Seismic anisotropy originated within the continental crust can be applied to deduce the kinematics and structures within orogens and is widely attributed to regionally aligned minerals,e.g.,hornblende.However,naturally deformed rocks commonly show various structural layers(e.g.,strain localization layers).It is necessary to reveal how both varying amphibole contents and fabrics in the structural layers of strain localization impact seismic property and its interpretations in terms of deformation.We present microstructures,petrofabrics,and calculate seismic properties of deformed amphibolite with the microstructures ranging from mylonite to ultramylonite.The transition from mylonite to ultramylonite is accompanied by a slight decrease of amphibole grain size,a disintegration of amphibole and plagioclase aggregates,and amphibole aspect ratio increase(from 1.68 to 2.23),concomitant with the precipitation of feldspar and/or quartz between amphibole grains.The intensities of amphibole crystallographic preferred orientations(CPOs)show a progressively increasing trend from mylonitic layers to homogeneous ultramylonitic layers,as indicated by the JAm index increasing from 1.9–4.0 for the mylonitic layers and 4.0–4.8 for the transition layer,to 5.1–6.9 for the ultramylonitic layers.The CPO patterns are nearly random for plagioclase and quartz.Polycrystalline amphibole aggregates in the amphibolitic mylonite deform by diffusion,mechanical rotation,and weak dislocation creep,and develop CPOs collectively.The polymineralic matrix(such as quartz and plagioclase)of the mylonite and the ultramylonite deform dominantly by dissolution-precipitation,combined with weak dislocation creep.The mean P and S wave velocities are estimated to be 6.3 and 3.5 km/s,respectively,for three layers of the mylonitic amphibolite.The respective maximum P and S anisotropies are 1.5%–6.4%and 1.8%–4.5%for the mylonite layers of the mylonitic amphibolite,and 6.0%–6.9%and 4.5%–5.0%for the transition layers;but for the ultramylonite layers,these values increase significantly to 8.0%–9.1%and 5.1%–6.0%,respectively.Furthermore,increasing strain(strain localization)generates significant variations in the geometry of the seismic anisotropy.This effect,coupled with the geographical orientations of structures in the Hengshan-Wutai-Fuping complex terrains,can generate substantial variations in the orientation and magnitude of seismic anisotropy for the continental crust as measured by the existing North China Geoscience Transect.Thickened amphibolitic layers by extensively folding or thrusting in the middle crust can explain the strong shear wave splitting and the tectonic boundary parallel fast shear wave polarization beneath the Hengshan-Wutai-Fuping complex terrains.Therefore,signals of seismic anisotropy varying with depth in the deforming continent crust need not deduce depth-varying kinematics or/and tectonic decoupling.展开更多
For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology ...For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology to study the effect of the matrix proportion on the mechanical properties and rupture behaviors of rock.Samples of mylonitic granite and granitic protomylonite with varying matrix proportions were obtained from a ductile shear zone for a series of uniaxial compression and acoustic emission(AE)tests.The results showed that with the increase in matrix proportion,the average strength and elastic modulus of the samples increased,and the rock sample with the largest matrix proportion exhibited the maximum peak stress of 244.42 MPa,which was 45.86%greater than the average peak stress of the rock samples with the smallest matrix proportions.For the rock samples with larger matrix proportion,their mechanical parameters exhibited greater dispersion and the large-scale appearance of AE events occurred earlier,showing a relatively gradual failure process.These samples had larger accumulated AE parameter values and greater degree of failure.In contrast,for samples with smaller matrix proportions,the large-scale appearance of AE events occurred close to the peak stress,indicating that the occurrence of damage and fractures was centralized and instantaneous.These samples had lower accumulated AE parameter values and fewer cracks after failure.Additionally,for the rock samples with more matrix proportion,the average variance of the b-value was 1.1,which was lower than that of rock samples with the smallest matrix proportion(the average variance of the b-value was 3.7).Furthermore,it can be predicted that under certain stress,the failure depth around a tunnel is generally smaller when the strength of rock samples with larger matrix proportion is greater.展开更多
The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion o...The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan（DCS） high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River（ASRR） shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.展开更多
Structural, microstructural analysis is done on the Altun fault zo ne and fault rocks. The major characteristics of faulting are summarized. Micros tructural observation reveals a complicated evolution of the fault zo...Structural, microstructural analysis is done on the Altun fault zo ne and fault rocks. The major characteristics of faulting are summarized. Micros tructural observation reveals a complicated evolution of the fault zone. Much at tention is paid to the microstructural observation and dynamic analysis of fault ing. The occurrence of phengite grains suggest abnormally high pressure conditio ns during ductile deformation and metamorphism, while the occurrence of muscovit e-chlorite mineral assemblage suggest a low temperature and low pressure condit i on. Micro-component analysis on the inter-grown muscovite and chlorite grains gives similar information. It is concluded that the first deformation along the Altun fault zone is a type of ductile shearing, forming mylonites and mylonitic rocks along the fault zone. A post-Jurassic deformation is primarily suggested by the involvement of the l atest tectonic units (Jurassic) in the ductile deformation.The early tectonic ev ent involves deformation and metamorphism under conditions in the upper crust, w ith T-P conditions varying to a large extent (T-270℃ ～350℃; P-0.005GPa～0. 43GPa), which may be attributed to the extra tectonic stresses.展开更多
The main central thrust(MCT)is one of the major thrusts in Himalayas.In central Himalaya,MCT was defined as a contact between underlying Lesser Himalayan Sequence(LHS)and overlying higher Himalayan crystallines(HHC).H...The main central thrust(MCT)is one of the major thrusts in Himalayas.In central Himalaya,MCT was defined as a contact between underlying Lesser Himalayan Sequence(LHS)and overlying higher Himalayan crystallines(HHC).However,in the Kashmir Himalayas,the main central thrust zone(MCTZ),shear zone associated with MCT,is overlain by Kashmir Tethyan Sequence suggesting that the MCTZ has been deformed through a mechanism different than the mechanism responsible for MCTZ evolution in other parts of the Himalayas.In the present study we used structural,microfabric and kinematic analyses to investigate the deformation kinematics of MCTZ.Microstructural investigation revealed that the quartz in orthogneiss mylonites of MCTZ was dynamically recrystallized by grain boundary migration(GBM)and sub-grain rotation recrystallisation(SGR)with top-toSW sense of shear.The mean kinematic vorticity number(W;)just above the thrust ranges from 0.72to 0.84(40%–52%pure shear component)decreasing upwards to 0.65–0.71(35%–50%pure shear component).Deformation in the MCTZ is characterized by Rxzstrain ratio varying from 2.7 to 8.The present study suggested that the MCTZ suffered 3%–40%vertical shortening and 3%–66%transportparallel elongation.The results suggested that the HHC’s were not completely exhumed to the topographic surfaces in the Kashmir Himalayas.Along the basal decollement,i.e.,the main Himalayan thrust(MHT),the deformation continued until MCTZ reached the brittle-ductile transition where deformation mechanism changed to the brittle and the MCTZ rocks were transported to the surface through slip on brittle MCT.展开更多
The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in so...The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle-ductile to brittle high-angle normal faults)in the footwall.展开更多
A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and ...A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.展开更多
The Ailaoshan-Red River（ASRR） shear zone in SW China represents an important discontinuity believed to have accommodated eastward extrusion of the Tibetan Plateau in response to the collision of the Indian and Euras...The Ailaoshan-Red River（ASRR） shear zone in SW China represents an important discontinuity believed to have accommodated eastward extrusion of the Tibetan Plateau in response to the collision of the Indian and Eurasian plates. The onset timing and duration of the ASRR sinistral strike-slip shearing have been hotly disputed. In this paper we present new zircon LA-ICP-MS U-Pb geochronological data from six syntectonic granitic mylonite and leucosomes samples from the ASRR shear zone. Our data reveal a metamorphic age of ~40 Ma, most likely suggesting the maximum age of the shearing initiation. Rocks showing syn-kinematic signatures yield crystallization ages of 38–22 Ma, with inherited components ranging from 716 to 108 Ma. These results, together with existing geological and geochronological data, indicate that the sinistral shearing along the ASRR zone probably began at 40 Ma, mainly activated at 29–22 Ma and lasted at least to ~22 Ma. Our data suggest a continuous extrusion between the Indochina and South China blocks during ~35–17 Ma. The ASRR sinistral shearing has accommodated large scale eastward displacement of the southeastern Tibetan syntaxis, and is likely responsible for the opening of the South China Sea.展开更多
The Yunmeng Shan metamorphic core complex （MCC） is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone （mylonite zone）, chloritized microbreccia...The Yunmeng Shan metamorphic core complex （MCC） is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone （mylonite zone）, chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks （Es=0.66-0.72） to protomylonites （Es=0.66-0.83）, and to mylonites （Es=0.71-1.2）. The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite （0.47〈Wk〈0.85） record a bulk simple-dominated general shearing at the initial evolution stage of the Yunmeng Shan MCC＇s detachment zone; and the extensional crenulation cleavage（ecc） （0.34〈Wk〈0.77） recorded a bulk pure-dominated general shearing at the later stage of the evolution. Kinematic vorticity measurements also show that the Yunmeng Shan MCC detachment zone is a result of a combination of simple-dominated general shearing caused by crustal extension at the early stage and pure-dominated general shearing caused by MCC uplifting at the late stage. The ductile thinning estimated by finite strain measurements and estimation of Kinematic vorticity ranges from 52% to 82%, which is the minimum thining estimation. Our studies provide new evidence for mechanisms of the Yunmeng Shan MCC detachement zone.展开更多
Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A s...Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi （Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015）.展开更多
New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shan, central China. The fine-grained symplectic amphibolite-fa...New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shan, central China. The fine-grained symplectic amphibolite-facies assemblage and coronal structure enveloping eclogite-facies garnet, omphacite and phengite etc., representing strain-free decompression and retrogressive metamorphism, are considered as the main criteria to distinguish between the early-stage deformation under HP metamorphic conditions related to the continental deep subduction and collision, and the late-stage deformation under amphibolite to greenschist-facies conditions occurred in the post-eclogite exhumation processes. Two late-stages of widely developed, sequential ductile deformations D 3 and D 4, are recognized on the basis of penetrative fabrics and mineral aggregates in the Xiongdian-Suhe HP metamorphic unit, which shows clear, regionally, consistent overprinting relationships. D 3 fabrics are best preserved in the Suhe tract of low post-D 3 deformation intensity and characterized by steeply dipping layered mylonitic amphibolites associated with doubly vergent folds. They are attributed to a phase of tectonism linked to the initial exhumation of the HP rocks and involved crustal shortening with the development of upright structures and the widespread emplacement of garnet-bearing granites and felsic dikes. D 4 structures are attributed to the main episode of ductile extension (D 1 4) with a gently dipping foliation to the north and common intrafolial, recumbent folds in the Xiongdian tract, followed by normal sense top-to-the north ductile shearing (D 2 4) along an important tectonic boundary, the so-called Majiawa-Hexiwan fault (MHF), the westward continuation of the Balifan-Mozitan-Xiaotian fault (BMXF) of the northern Dabie Shan. It is indicated that the two stages of ductile deformation observed in the Xiongdian-Suhe HP metamorphic unit, reflecting the post-eclogite compressional or extrusion wedge formation, the subhorizontal ductile extension and crustal thinning as well as the top-to-the north shearing along the high-angle ductile shear zones responsible for exhumation of the HP unit as a coherent slab, are consistent with those recognized in the Dabie-Sulu UHP and HP metamorphic belts, suggesting that they were closely associated in time and space. The Xiongdian-Suhe HP metamorphic unit thus forms part of the Triassic (250-230 Ma) collision orogenic belt, and can not connect with the South Altun-North Qaidam-North Qinling UHP metamorphic belt formed during the Early Paleozoic (500-400 Ma).展开更多
A 100～500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints...A 100～500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints of the rocks strike in NE70 and dip steeply (nearly vertical), coincident with the striking of Altyn Tagh fault zone, and their stretched lineations are nearly horizontal. Shear strains are well developed and show sinistral sheared. The amphibolitic and granitic mylonites are most probably the products of deep\|seated melting caused by sinistral strike\|slip shearing as suggested by the evidence below: (1) The migmatization is intensely developed and spatially controlled by the shear zone, and the rock has a set of NNE perspective foliation which is in accord with the direction of the Altyn Tagh strike\|slip fault zone. (2) The recrystallized hornblende aggregate is distributed in band with obvious nebulous texture, indicating the characteristics of anatexis, and the hornblendes are oriented and form the nearly horizontal stretching lineation; some hornblendes have titanite inclusions, and magmatic long\|columnar zircons are in directional arrangement.(3) The banded felsic material is developed, and the plagioclase is characteristic of high\|temperature plastic deformation and shows sinistral shear stain. (4) In mylonites, all the axis C fabric of quartz shows the feature of sinistral shearing and the majority is generally middle to low temperature fabric, but there also exists high temperature fabric, which suggests that high temperature shearing occur in the early stage of strike\|slip deformation and it is characterized by middle to low temperature shearing at the beginning of anatexis or in the late stage of the deformation. (5) On the XZ plane of mylonite and mylonitized rocks, there exists the consistent sinistral shear stain, which suggests the products of the same strike\|slip shearing.Zircons were separated from three samples of mylonitized granitic rocks for age dating. Two groups of zircon were distinguished in morphology: one is elongate prismatic grains, and the other shows slight rounding. Some zoned structure of selected grains were examined by cathodoluminescence. Dating was completed in the SHRIMP laboratory of Stanford University. Fifteen analyses were made on 14 zircon grains. Sample S99\|25 show two obvious two age groups, one is 527～549Ma, and the other is 466～472Ma. Sample S99\|9 contains two age groups either, one is 475～507Ma and the other is 279Ma. Sample S99\|6 shows three groups: ① 528Ma; ② 365Ma and③ 238～243Ma, here the 365Ma is explained as mixture age between the other two age groups according to its exact location in the grain. In summary, from the three samples we found at least three age groups: 507～548Ma; 466～472Ma; 238～243Ma.The ages of 507Ma to 548Ma and 466Ma to 472Ma represent the deformation and metamorphism of Early Paleozoic age, which is most likely correspond to the close of the Qilian Sea and continental subduction and collision reported in recent papers (Yang Jingsui et al., 1998; Zhang Jianxin et al., 1999; Xu Zhiqin et al., 1999). The 238～243Ma most likely represent the formational age of the Altyn Tagh strike\|slip fault, which is consistent with the formational age (200～240Ma) of the large\|scale sinistral strike\|slip fault zone of the South Margin of East Kunlun (Li Haibing et al., 1996), and both can be attributed to the oblique subduction and collision of the Bayan Har terrane with the East Kunlun terrane during Indosinian period.展开更多
This paper discusses the relationship between the volume loss, fluid flow and component variations in the ductile shear zone of the southern Tan-Lu fault belt. The results show that there is a large amount of fluids f...This paper discusses the relationship between the volume loss, fluid flow and component variations in the ductile shear zone of the southern Tan-Lu fault belt. The results show that there is a large amount of fluids flowing through the shear zone during mylonitization, accompanied with the loss of volume of rocks and variations of elements and oxygen isotopes. The calculated temperature for mylonitization in different mylonites ranges from 446 to 484℃, corresponding to that of 475 to 500℃ for the wall rocks. The condition of differential stress during mylonization has been obtained between 99 and 210 MPa, whereas the differential stress in the wall rock gneiss is 70-78 MPa. The mylonites are enriched by factors of 1.32-1.87 in elements such as TiO2, P2O5, MnO, Y, Zr and V and depleted in SiO2, Na2O, K2O, Al203, Sr, Rb and light REEs compared to their protolith gneiss. The immobile element enrichments are attributed to enrichments in residual phases such as ilmentite, zircon, apatite and epidote in mylonites and are interpreted as due to volume losses from 15% to 60% in the ductile shear zone. The largest amount of SiO2 loss is 35.76 g/100 g in the ductile shear zone, which shows the fluid infiltration. Modeling calculated results of the fluid/rock ratio for the ductile shear zone range from 196 to 1192 by assuming different degrees of fluid saturation. Oxygen isotope changes of quartz and feldspar and the calculated fluid are corresponding to the variations of differential flow stress in the ductile shear zone. With increasing differential flow stress, the mylonites show a slight decrease of δ^18O in quartz, K-feldspar and fluid.展开更多
A number of studies revealed that the Gangdese magmatic belt of southern Tibet was closely related to the northward subduction of the Neo-Tethys oceanic lithosphere and Indo-Asian collision.However,pre-Cretaceous magm...A number of studies revealed that the Gangdese magmatic belt of southern Tibet was closely related to the northward subduction of the Neo-Tethys oceanic lithosphere and Indo-Asian collision.However,pre-Cretaceous magmatism is still poorly constrained in the Gangdese magmatic belt,southern Tibet.Here,we conducted systematically geochronology and geochemistry studies on a newly-identified granitic pluton in the middle Gangdese magmatic belt(Namling area),southern Tibet.Zircon SHRIMPⅡU-Pb dating for one representative sample gives a weighted age of 184.2±1.8 Ma(MSWD=±1.11),corresponding to emplacement and crystallization age of the granitic pluton in the Early Jurassic(Pliensbachian).High SiO2(68.9-72.1 wt.%)contents and intermediate Mg#values(35-38)together suggest that the newly-identified granitic pluton was probably formed by partial melting of crustal material with minor injection of mantle-derived magma,precluding an origin from melting of metasedimentary rocks that are characterized by low Mg#and high zirconδ^18O values(>8‰).Geochemically,the newly-identified granitic pluton belongs to typical I-type granitic affinity,whereas this is inconsistent with aluminium saturation index(ASI=A/CNK ratios)and geochemical signatures.This suggests that zircon oxygen isotopes(4.30‰-5.28‰)and mineral features(lacking Al-rich minerals)are reliable indicators for discriminating granitic origin.Significantly depleted whole-rock Sr-Nd-Hf isotopic compositions and zirconεHf(t)values indicate that the granitic pluton was derived from partial melting of depleted arc-type lavas.In addition,the granitic pluton shows zirconδ^18O values ranging from 4.30‰to 5.28‰(with a mean value of 4.77‰)that are consistent with mantle-derived zircon values(5.3‰±0.6‰)within the uncertainties,indicating that the granitic pluton might have experienced weak short-living high-temperature hydrous fluid-rock interaction.Combined with the Sr-Nd-Hf-O isotopes and geochemical signatures,we propose that the newly-identified granitic pluton was originated from partial melting of depleted mafic lower crust,and experienced only negligible wall-rock contamination during ascent.Integrated with published data,we also propose that the initial subduction of the Neo-Tethys oceanic lithosphere occurred no later than the Pliensbachian of the Early Jurassic.展开更多
基金financially co-supported by the National Key R&D Program of China (Grant No.2017YFC0601401 and 2017YFC0601300-01)the National Natural Science Foundation of China (Grant no. 41602211 and 41230206)
文摘The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10-7.87s-1 and 10-11.49s-1 with differential stresses of 32.63-63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing’an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean.
基金part of the research project"Configuración Geológica y Geodinámica del sector central de la Comarca Nordpatagónica,Argentina"(24/H100)granted by the Universidad Nacional del Sur"La Orogenia Gondwánica en el sector central de la Comarca Nordpatagónica"(11420090100108)granted by CONICET
文摘Structural analyses in the northern part of the North Patagonia Massif, in the foliated Caita Co granite and in La Sefia and Pangare mylonites, indicate that the pluton was intruded as a sheet-like body into an opening pull-apart structure during the Gondwana Orogeny. Geochronological studies in the massif indicate a first, lower to middle Permian stage of regional deformation, related to movements during indentation tectonics, with emplacement of foliated granites in the western and central areas of the North Patagonian Massif. Between the upper Permian and lower Triassic, evidence indicates emplacement of undeformed granitic bodies in the central part of the North Patagonian Massif. A second pulse of deformation between the middle and upper Triassic is related to the emplacement of the Caita CO granite, the development of mylonitic belts, and the opening of the Los Menucos Basin. During this pulse of deformation, compression direction was from the eastern quadrant.
基金This study was funded by the National Natural Science Foundation of China （grant numbers 40272094, 40672131） We gratefully acknowledge Mr. Luo Xiuquan and Zhang Youquan from the Petroleum Geology Research and Laboratory Center, Institute of Petroleum Exploration and Development, Beijing, for their work on the 40Ar/39Ar analysis.
文摘Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.
基金This study was supported by the National Key Project "Study of the Natural Gas Fault System in the Tancheng-Lujiang Fault Belt (No. 95-101-01)" of the Ninth Five-Year Plan Period and the National Natural Science Foundation of China Grant 48970172.
文摘On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.
基金supported by the National Key Research and Development Program (Grant No. 2017YFC0602401)the National Natural Science Foundation of China (Grant No. 41472188)the Excellent Youth Fund of National Natural Science Foundation of China (Grant No. 41722207)
文摘Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif,especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that:(1) Diancangshan deep metamorphic rock has experienced early high-temperature leftlateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing;(2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and(3) the fluid is quite active during the syn-tectonic shearing overprinted lowtemperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif.
基金the National Natural Science Foundation of China(Grant No.49772148) the Open Lab of the Geo-dynamics(Grant No.dlkf-9802) under the administration of the Ministry of Geology and Mineral Resources of China.
文摘A dating of two biotite samples taken from the meso- and low-temperature myloniteswithin the Shangyi-Chicheng fault belt on the north of the North China Craton yields 40Ar/39Ar iso-topic ages of (399 1) Ma and (263 2) Ma, respectively. These data reflect an Early Devonian deformation and a Late Carboniferous retrograde metamorphism event along the fault, suggesting that the tectonic activities of the North China Craton in Paleozoic should be reconsidered.
基金funded by the National Key Research and Development Program of China(No.2021YFA0716001)the National Science Foundation of China(No.42272245).
文摘Strain localization processes in the continental crust generate faults and ductile shear zones over a broad range of scales affecting the long-term lithosphere deformation and the mechanical response of faults during the seismic cycle.Seismic anisotropy originated within the continental crust can be applied to deduce the kinematics and structures within orogens and is widely attributed to regionally aligned minerals,e.g.,hornblende.However,naturally deformed rocks commonly show various structural layers(e.g.,strain localization layers).It is necessary to reveal how both varying amphibole contents and fabrics in the structural layers of strain localization impact seismic property and its interpretations in terms of deformation.We present microstructures,petrofabrics,and calculate seismic properties of deformed amphibolite with the microstructures ranging from mylonite to ultramylonite.The transition from mylonite to ultramylonite is accompanied by a slight decrease of amphibole grain size,a disintegration of amphibole and plagioclase aggregates,and amphibole aspect ratio increase(from 1.68 to 2.23),concomitant with the precipitation of feldspar and/or quartz between amphibole grains.The intensities of amphibole crystallographic preferred orientations(CPOs)show a progressively increasing trend from mylonitic layers to homogeneous ultramylonitic layers,as indicated by the JAm index increasing from 1.9–4.0 for the mylonitic layers and 4.0–4.8 for the transition layer,to 5.1–6.9 for the ultramylonitic layers.The CPO patterns are nearly random for plagioclase and quartz.Polycrystalline amphibole aggregates in the amphibolitic mylonite deform by diffusion,mechanical rotation,and weak dislocation creep,and develop CPOs collectively.The polymineralic matrix(such as quartz and plagioclase)of the mylonite and the ultramylonite deform dominantly by dissolution-precipitation,combined with weak dislocation creep.The mean P and S wave velocities are estimated to be 6.3 and 3.5 km/s,respectively,for three layers of the mylonitic amphibolite.The respective maximum P and S anisotropies are 1.5%–6.4%and 1.8%–4.5%for the mylonite layers of the mylonitic amphibolite,and 6.0%–6.9%and 4.5%–5.0%for the transition layers;but for the ultramylonite layers,these values increase significantly to 8.0%–9.1%and 5.1%–6.0%,respectively.Furthermore,increasing strain(strain localization)generates significant variations in the geometry of the seismic anisotropy.This effect,coupled with the geographical orientations of structures in the Hengshan-Wutai-Fuping complex terrains,can generate substantial variations in the orientation and magnitude of seismic anisotropy for the continental crust as measured by the existing North China Geoscience Transect.Thickened amphibolitic layers by extensively folding or thrusting in the middle crust can explain the strong shear wave splitting and the tectonic boundary parallel fast shear wave polarization beneath the Hengshan-Wutai-Fuping complex terrains.Therefore,signals of seismic anisotropy varying with depth in the deforming continent crust need not deduce depth-varying kinematics or/and tectonic decoupling.
基金supported by the National Natural Science Foundation of China(Grant No.52125402)the Natural Science Foundation of Sichuan Province,China(Grant No.2022NSFSC0005).
文摘For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology to study the effect of the matrix proportion on the mechanical properties and rupture behaviors of rock.Samples of mylonitic granite and granitic protomylonite with varying matrix proportions were obtained from a ductile shear zone for a series of uniaxial compression and acoustic emission(AE)tests.The results showed that with the increase in matrix proportion,the average strength and elastic modulus of the samples increased,and the rock sample with the largest matrix proportion exhibited the maximum peak stress of 244.42 MPa,which was 45.86%greater than the average peak stress of the rock samples with the smallest matrix proportions.For the rock samples with larger matrix proportion,their mechanical parameters exhibited greater dispersion and the large-scale appearance of AE events occurred earlier,showing a relatively gradual failure process.These samples had larger accumulated AE parameter values and greater degree of failure.In contrast,for samples with smaller matrix proportions,the large-scale appearance of AE events occurred close to the peak stress,indicating that the occurrence of damage and fractures was centralized and instantaneous.These samples had lower accumulated AE parameter values and fewer cracks after failure.Additionally,for the rock samples with more matrix proportion,the average variance of the b-value was 1.1,which was lower than that of rock samples with the smallest matrix proportion(the average variance of the b-value was 3.7).Furthermore,it can be predicted that under certain stress,the failure depth around a tunnel is generally smaller when the strength of rock samples with larger matrix proportion is greater.
基金support from the State Key Research"973"Plan of China(No. 2009CB421001)National Natural Science Foundation of China(40872139)+1 种基金the 111 Project(B07011) of the Ministry of Education,State Key Laboratory of Geological Processes and Mineral Resources (GPMR200837)the Fundamental Research Funds for the Central Universities(GPMR2009PY01)
文摘The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan（DCS） high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River（ASRR） shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.
文摘Structural, microstructural analysis is done on the Altun fault zo ne and fault rocks. The major characteristics of faulting are summarized. Micros tructural observation reveals a complicated evolution of the fault zone. Much at tention is paid to the microstructural observation and dynamic analysis of fault ing. The occurrence of phengite grains suggest abnormally high pressure conditio ns during ductile deformation and metamorphism, while the occurrence of muscovit e-chlorite mineral assemblage suggest a low temperature and low pressure condit i on. Micro-component analysis on the inter-grown muscovite and chlorite grains gives similar information. It is concluded that the first deformation along the Altun fault zone is a type of ductile shearing, forming mylonites and mylonitic rocks along the fault zone. A post-Jurassic deformation is primarily suggested by the involvement of the l atest tectonic units (Jurassic) in the ductile deformation.The early tectonic ev ent involves deformation and metamorphism under conditions in the upper crust, w ith T-P conditions varying to a large extent (T-270℃ ～350℃; P-0.005GPa～0. 43GPa), which may be attributed to the extra tectonic stresses.
基金the Council of Scientific and Industrial Research(CSIR)New Delhi for supporting this research work by providing the financial assistance in the form of Senior Research Fellowship。
文摘The main central thrust(MCT)is one of the major thrusts in Himalayas.In central Himalaya,MCT was defined as a contact between underlying Lesser Himalayan Sequence(LHS)and overlying higher Himalayan crystallines(HHC).However,in the Kashmir Himalayas,the main central thrust zone(MCTZ),shear zone associated with MCT,is overlain by Kashmir Tethyan Sequence suggesting that the MCTZ has been deformed through a mechanism different than the mechanism responsible for MCTZ evolution in other parts of the Himalayas.In the present study we used structural,microfabric and kinematic analyses to investigate the deformation kinematics of MCTZ.Microstructural investigation revealed that the quartz in orthogneiss mylonites of MCTZ was dynamically recrystallized by grain boundary migration(GBM)and sub-grain rotation recrystallisation(SGR)with top-toSW sense of shear.The mean kinematic vorticity number(W;)just above the thrust ranges from 0.72to 0.84(40%–52%pure shear component)decreasing upwards to 0.65–0.71(35%–50%pure shear component).Deformation in the MCTZ is characterized by Rxzstrain ratio varying from 2.7 to 8.The present study suggested that the MCTZ suffered 3%–40%vertical shortening and 3%–66%transportparallel elongation.The results suggested that the HHC’s were not completely exhumed to the topographic surfaces in the Kashmir Himalayas.Along the basal decollement,i.e.,the main Himalayan thrust(MHT),the deformation continued until MCTZ reached the brittle-ductile transition where deformation mechanism changed to the brittle and the MCTZ rocks were transported to the surface through slip on brittle MCT.
基金Project 49070135 supported by the National Natural Science Foundation of China
文摘The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle-ductile to brittle high-angle normal faults)in the footwall.
文摘A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.
基金Supported by the National Basic Research Program of China(No.2014CB440901)the China National Natural Science Foundation(No.41190073)the Fundamental Research Funds for the Central Universities to SYSU
文摘The Ailaoshan-Red River（ASRR） shear zone in SW China represents an important discontinuity believed to have accommodated eastward extrusion of the Tibetan Plateau in response to the collision of the Indian and Eurasian plates. The onset timing and duration of the ASRR sinistral strike-slip shearing have been hotly disputed. In this paper we present new zircon LA-ICP-MS U-Pb geochronological data from six syntectonic granitic mylonite and leucosomes samples from the ASRR shear zone. Our data reveal a metamorphic age of ~40 Ma, most likely suggesting the maximum age of the shearing initiation. Rocks showing syn-kinematic signatures yield crystallization ages of 38–22 Ma, with inherited components ranging from 716 to 108 Ma. These results, together with existing geological and geochronological data, indicate that the sinistral shearing along the ASRR zone probably began at 40 Ma, mainly activated at 29–22 Ma and lasted at least to ~22 Ma. Our data suggest a continuous extrusion between the Indochina and South China blocks during ~35–17 Ma. The ASRR sinistral shearing has accommodated large scale eastward displacement of the southeastern Tibetan syntaxis, and is likely responsible for the opening of the South China Sea.
基金supported by National Natural Science Foundation of China(Grant No.41102129,90714006 and 41002073)the foundation of Fundamental Science on Radioactive Geology and Exploration Technology Laboratory,East China Institute of Technology(Grant No.REGT1207)+1 种基金the Deep Exploration Technology and Experimentation Program of China(Grant No.SinoProbe-08-01-03)projects of China Geological Survey(1212011120135,1212010611803,1212011085474,1212011085473)
文摘The Yunmeng Shan metamorphic core complex （MCC） is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone （mylonite zone）, chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks （Es=0.66-0.72） to protomylonites （Es=0.66-0.83）, and to mylonites （Es=0.71-1.2）. The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite （0.47〈Wk〈0.85） record a bulk simple-dominated general shearing at the initial evolution stage of the Yunmeng Shan MCC＇s detachment zone; and the extensional crenulation cleavage（ecc） （0.34〈Wk〈0.77） recorded a bulk pure-dominated general shearing at the later stage of the evolution. Kinematic vorticity measurements also show that the Yunmeng Shan MCC detachment zone is a result of a combination of simple-dominated general shearing caused by crustal extension at the early stage and pure-dominated general shearing caused by MCC uplifting at the late stage. The ductile thinning estimated by finite strain measurements and estimation of Kinematic vorticity ranges from 52% to 82%, which is the minimum thining estimation. Our studies provide new evidence for mechanisms of the Yunmeng Shan MCC detachement zone.
基金funded by the National Natural Science Foundation of China(grants No.41572191 and 41702211)the Natural Science Foundation of Guangxi(grant No.2017GXNSFBA198166)
文摘Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi （Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015）.
文摘New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shan, central China. The fine-grained symplectic amphibolite-facies assemblage and coronal structure enveloping eclogite-facies garnet, omphacite and phengite etc., representing strain-free decompression and retrogressive metamorphism, are considered as the main criteria to distinguish between the early-stage deformation under HP metamorphic conditions related to the continental deep subduction and collision, and the late-stage deformation under amphibolite to greenschist-facies conditions occurred in the post-eclogite exhumation processes. Two late-stages of widely developed, sequential ductile deformations D 3 and D 4, are recognized on the basis of penetrative fabrics and mineral aggregates in the Xiongdian-Suhe HP metamorphic unit, which shows clear, regionally, consistent overprinting relationships. D 3 fabrics are best preserved in the Suhe tract of low post-D 3 deformation intensity and characterized by steeply dipping layered mylonitic amphibolites associated with doubly vergent folds. They are attributed to a phase of tectonism linked to the initial exhumation of the HP rocks and involved crustal shortening with the development of upright structures and the widespread emplacement of garnet-bearing granites and felsic dikes. D 4 structures are attributed to the main episode of ductile extension (D 1 4) with a gently dipping foliation to the north and common intrafolial, recumbent folds in the Xiongdian tract, followed by normal sense top-to-the north ductile shearing (D 2 4) along an important tectonic boundary, the so-called Majiawa-Hexiwan fault (MHF), the westward continuation of the Balifan-Mozitan-Xiaotian fault (BMXF) of the northern Dabie Shan. It is indicated that the two stages of ductile deformation observed in the Xiongdian-Suhe HP metamorphic unit, reflecting the post-eclogite compressional or extrusion wedge formation, the subhorizontal ductile extension and crustal thinning as well as the top-to-the north shearing along the high-angle ductile shear zones responsible for exhumation of the HP unit as a coherent slab, are consistent with those recognized in the Dabie-Sulu UHP and HP metamorphic belts, suggesting that they were closely associated in time and space. The Xiongdian-Suhe HP metamorphic unit thus forms part of the Triassic (250-230 Ma) collision orogenic belt, and can not connect with the South Altun-North Qaidam-North Qinling UHP metamorphic belt formed during the Early Paleozoic (500-400 Ma).
文摘A 100～500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints of the rocks strike in NE70 and dip steeply (nearly vertical), coincident with the striking of Altyn Tagh fault zone, and their stretched lineations are nearly horizontal. Shear strains are well developed and show sinistral sheared. The amphibolitic and granitic mylonites are most probably the products of deep\|seated melting caused by sinistral strike\|slip shearing as suggested by the evidence below: (1) The migmatization is intensely developed and spatially controlled by the shear zone, and the rock has a set of NNE perspective foliation which is in accord with the direction of the Altyn Tagh strike\|slip fault zone. (2) The recrystallized hornblende aggregate is distributed in band with obvious nebulous texture, indicating the characteristics of anatexis, and the hornblendes are oriented and form the nearly horizontal stretching lineation; some hornblendes have titanite inclusions, and magmatic long\|columnar zircons are in directional arrangement.(3) The banded felsic material is developed, and the plagioclase is characteristic of high\|temperature plastic deformation and shows sinistral shear stain. (4) In mylonites, all the axis C fabric of quartz shows the feature of sinistral shearing and the majority is generally middle to low temperature fabric, but there also exists high temperature fabric, which suggests that high temperature shearing occur in the early stage of strike\|slip deformation and it is characterized by middle to low temperature shearing at the beginning of anatexis or in the late stage of the deformation. (5) On the XZ plane of mylonite and mylonitized rocks, there exists the consistent sinistral shear stain, which suggests the products of the same strike\|slip shearing.Zircons were separated from three samples of mylonitized granitic rocks for age dating. Two groups of zircon were distinguished in morphology: one is elongate prismatic grains, and the other shows slight rounding. Some zoned structure of selected grains were examined by cathodoluminescence. Dating was completed in the SHRIMP laboratory of Stanford University. Fifteen analyses were made on 14 zircon grains. Sample S99\|25 show two obvious two age groups, one is 527～549Ma, and the other is 466～472Ma. Sample S99\|9 contains two age groups either, one is 475～507Ma and the other is 279Ma. Sample S99\|6 shows three groups: ① 528Ma; ② 365Ma and③ 238～243Ma, here the 365Ma is explained as mixture age between the other two age groups according to its exact location in the grain. In summary, from the three samples we found at least three age groups: 507～548Ma; 466～472Ma; 238～243Ma.The ages of 507Ma to 548Ma and 466Ma to 472Ma represent the deformation and metamorphism of Early Paleozoic age, which is most likely correspond to the close of the Qilian Sea and continental subduction and collision reported in recent papers (Yang Jingsui et al., 1998; Zhang Jianxin et al., 1999; Xu Zhiqin et al., 1999). The 238～243Ma most likely represent the formational age of the Altyn Tagh strike\|slip fault, which is consistent with the formational age (200～240Ma) of the large\|scale sinistral strike\|slip fault zone of the South Margin of East Kunlun (Li Haibing et al., 1996), and both can be attributed to the oblique subduction and collision of the Bayan Har terrane with the East Kunlun terrane during Indosinian period.
基金National Natural Science Foundation of China （Grant 40473021） the National 973- Project of the Ministry of Science and Technology of China （2003CB214600） the Foundation of the State Key Laboratory of Geological Processes and Mineral Resources, China University of Geosciences, and the jointed project of Max-Planck-Institute of Society and Chinese Academy of Sciences in Max-Planck-Institute of Nuclear Physics,Heidelberg, Germany.
文摘This paper discusses the relationship between the volume loss, fluid flow and component variations in the ductile shear zone of the southern Tan-Lu fault belt. The results show that there is a large amount of fluids flowing through the shear zone during mylonitization, accompanied with the loss of volume of rocks and variations of elements and oxygen isotopes. The calculated temperature for mylonitization in different mylonites ranges from 446 to 484℃, corresponding to that of 475 to 500℃ for the wall rocks. The condition of differential stress during mylonization has been obtained between 99 and 210 MPa, whereas the differential stress in the wall rock gneiss is 70-78 MPa. The mylonites are enriched by factors of 1.32-1.87 in elements such as TiO2, P2O5, MnO, Y, Zr and V and depleted in SiO2, Na2O, K2O, Al203, Sr, Rb and light REEs compared to their protolith gneiss. The immobile element enrichments are attributed to enrichments in residual phases such as ilmentite, zircon, apatite and epidote in mylonites and are interpreted as due to volume losses from 15% to 60% in the ductile shear zone. The largest amount of SiO2 loss is 35.76 g/100 g in the ductile shear zone, which shows the fluid infiltration. Modeling calculated results of the fluid/rock ratio for the ductile shear zone range from 196 to 1192 by assuming different degrees of fluid saturation. Oxygen isotope changes of quartz and feldspar and the calculated fluid are corresponding to the variations of differential flow stress in the ductile shear zone. With increasing differential flow stress, the mylonites show a slight decrease of δ^18O in quartz, K-feldspar and fluid.
基金co-supported by the Natural Science Foundation of Shandong Province(Grant No.ZR2019QD002)the National Natural Science Foundation of China(Grant No.41902230)+2 种基金the Key Laboratory of DeepEarth Dynamics of Ministry of Natural Resources(Grant No.J1901-16)the Young innovative projects of Shandong Province(Grant No.2019KJH004)the research foundation of China Geological Survey(JYYWF20181702)。
文摘A number of studies revealed that the Gangdese magmatic belt of southern Tibet was closely related to the northward subduction of the Neo-Tethys oceanic lithosphere and Indo-Asian collision.However,pre-Cretaceous magmatism is still poorly constrained in the Gangdese magmatic belt,southern Tibet.Here,we conducted systematically geochronology and geochemistry studies on a newly-identified granitic pluton in the middle Gangdese magmatic belt(Namling area),southern Tibet.Zircon SHRIMPⅡU-Pb dating for one representative sample gives a weighted age of 184.2±1.8 Ma(MSWD=±1.11),corresponding to emplacement and crystallization age of the granitic pluton in the Early Jurassic(Pliensbachian).High SiO2(68.9-72.1 wt.%)contents and intermediate Mg#values(35-38)together suggest that the newly-identified granitic pluton was probably formed by partial melting of crustal material with minor injection of mantle-derived magma,precluding an origin from melting of metasedimentary rocks that are characterized by low Mg#and high zirconδ^18O values(>8‰).Geochemically,the newly-identified granitic pluton belongs to typical I-type granitic affinity,whereas this is inconsistent with aluminium saturation index(ASI=A/CNK ratios)and geochemical signatures.This suggests that zircon oxygen isotopes(4.30‰-5.28‰)and mineral features(lacking Al-rich minerals)are reliable indicators for discriminating granitic origin.Significantly depleted whole-rock Sr-Nd-Hf isotopic compositions and zirconεHf(t)values indicate that the granitic pluton was derived from partial melting of depleted arc-type lavas.In addition,the granitic pluton shows zirconδ^18O values ranging from 4.30‰to 5.28‰(with a mean value of 4.77‰)that are consistent with mantle-derived zircon values(5.3‰±0.6‰)within the uncertainties,indicating that the granitic pluton might have experienced weak short-living high-temperature hydrous fluid-rock interaction.Combined with the Sr-Nd-Hf-O isotopes and geochemical signatures,we propose that the newly-identified granitic pluton was originated from partial melting of depleted mafic lower crust,and experienced only negligible wall-rock contamination during ascent.Integrated with published data,we also propose that the initial subduction of the Neo-Tethys oceanic lithosphere occurred no later than the Pliensbachian of the Early Jurassic.
