The multi-functionalization of polymer composites refers to the ability to connect multiple properties through simple structural design and simultaneously achieve multi-performance optimization.The large-scale design ...The multi-functionalization of polymer composites refers to the ability to connect multiple properties through simple structural design and simultaneously achieve multi-performance optimization.The large-scale design and mass production to realize the reasonable structure design of multifunctional polymer composites are urgently remaining challenges.Herein,the multifunctional MXene/graphene/polymer composites with three-dimensional thermally and electrically conductive network structures are fabricated via the utilization of the microstructure of the soft template,and a facile dispersion dip-coating approach.As a result,the polymer composites have a multiperformance improvement.At the MXene and graphene content of 18.7 wt%,the superior throughplane thermal conductivity of polymer composite is 2.44 W m^(−1)K^(−1),which is 1118%higher than that of the polymer matrix.The electromagnetic interference(EMI)shielding effectiveness of the sample reaches 43.3 dB in the range of X-band.And the mechanical property of the sample has advanced 4 times compared with the polymer matrix.The excellent EMI shielding and thermal management performance,along with the effortless and easy-to-scalable producing techniques,imply promising perspectives of the polymer composites in the next-generation smart electronic devices.展开更多
Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption.However,avoiding agglomeration and achieving layer-by-layer ordered intercalation remain chal-leng...Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption.However,avoiding agglomeration and achieving layer-by-layer ordered intercalation remain chal-lenging.Here,3D reduced graphene oxide(rGO)/MXene/TiO_(2)/Fe_(2)C lightweight porous microspheres with periodical intercalated structures and pronounced inter-facial effects were constructed by spray-freeze-drying and microwave irradiation based on the Maxwell–Wagner effect.Such approach reinforced interfacial effects via defects introduction,porous skeleton,multi-layer assembly and multi-compo-nent system,leading to synergistic loss mechanisms.The abundant 2D/2D/0D/0D intercalated heterojunctions in the microspheres provide a high density of polari-zation charges while generating abundant polarization sites,resulting in boosted interfacial polarization,which is verified by CST Microwave Studio simulations.By precisely tuning the 2D nanosheets intercalation in the heterostructures,both the polarization loss and impedance matching improve significantly.At a low filler loading of 5 wt%,the polarization loss rate exceeds 70%,and a minimum reflection loss(RLmin)of-67.4 dB can be achieved.Moreover,radar cross-section simulations further confirm the attenuation ability of the optimized porous microspheres.These results not only provide novel insights into understanding and enhancing interfacial effects,but also constitute an attractive platform for implementing heterointerface engineering based on customized 2D hierarchical architectures.展开更多
Fabrics have attracted significant attention in the field of electromagnetic shielding due to their unique grid structure,high electrical conductivity,and flexibility.To enrich the research of textiles for microwave a...Fabrics have attracted significant attention in the field of electromagnetic shielding due to their unique grid structure,high electrical conductivity,and flexibility.To enrich the research of textiles for microwave absorption,two-dimensional transition metal carbide(MXene)-enhanced reduced graphene oxide-based fabrics(MXene/RGO fabrics)were synthesized in this paper by using wet spinning–ionic cross-linking–chemical reduction strategy.MXene/RGO fabrics achieve a minimum reflection loss of−58.3 dB at 17.6 GHz and a thickness of 2.4 mm,with an effective absorption bandwidth of 4.92 GHz.In addition,the combination of electromagnetic finite element simulation technology and test results was used to further elucidate the response mode and loss mechanism of MXene/RGO fabrics.The MXene/RGO composite fibers exhibit a tuned attenuation ability and impedance matching performance,which is attributed to the increased polarization relaxation loss caused by the large number of heterogeneous interfaces between RGO,MXene,and TiO2 particles,as well as the appropriate electrical conductivity(16.6 S/cm).MXene/RGO fibers exhibit excellent microwave absorption performance,mechanical strength(534 MPa),easy modification,and fatigue resistance,promising stable absorption of electromagnetic waves in complex environments,thereby expanding the application scenarios of fabrics in the field of microwave absorption.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivit...With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.展开更多
Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires...In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.展开更多
Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.B...Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.展开更多
This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and...This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.展开更多
The emerging two-dimensional(2D)membranes offer a promising way to improve the water desalination performance of traditional membranes.MXene/graphene oxide(GO) composite membrane are known for their high separation pe...The emerging two-dimensional(2D)membranes offer a promising way to improve the water desalination performance of traditional membranes.MXene/graphene oxide(GO) composite membrane are known for their high separation performance and structural stability.In this study,molecular simulations are performed to investigate the desalination performance of the 2D MXene/GO membrane.The results reveal that the surface of the MXene nanosheet could induce the formation of ordered water structures,thereby accelerating the water transport in the 2D membrane.The higher rejection rate would be found in MXene/GO membrane with a larger GO oxidation degree owing to the sterichindrance effect induced by the functional groups on the GO surface.Overall,the MXene/GO(20) membrane with the interlayer spacing of 0.9 nm shows the highest water permeability(37.22×10^(-7)L·m^(-1)·h^(-1)·bar^(-1),1 bar=0.1 MPa)and a salt rejection of 100%.The results could provide theoretical insights for developing 2D membranes for water desalination.展开更多
Due to insufficient energy density,supercapacitors(SCs)with preeminent-power and long cycle stability cannot be implemented in some practical applications.Exploring hybrid materials with redox activity to emerge high ...Due to insufficient energy density,supercapacitors(SCs)with preeminent-power and long cycle stability cannot be implemented in some practical applications.Exploring hybrid materials with redox activity to emerge high specific capacitance in ionic liquid(IL)electrolytes can solve this problem.Herein,we report a redox-organic molecule 2,6-diaminoanthraquinone(DAAQ)modified MXene(Ti3C2Tx)/Graphene(DAAQ-M/G)composite material.With the assist of graphene oxide(GO),MXene and graphene fabricate a three-dimensional(3D)interconnected structure as a conductive framework,which inhibits self-stacking of MXene monolayers and ensures high electronic conductivity.Meanwhile,DAAQ is loaded onto the M/G framework through covalent/non-covalent functionalization.The DAAQ as a spacer effectively enlarges the interlayer spacing of MXene nanosheets,and meanwhile produces reversible redox reactions during charge/discharge processes to provide additional Faradaic contribution to capacity.Therefore,the specific capacitance(capacity)of the DAAQ-M/G as the negative electrode material reaches to 226 F g^(-1)(306 C g^(-1))at 1 A g^(-1)in 1-ethyl-3-methylimidazolium tetrafluoroborate(EmimBF4)electrolyte.Furthermore,an asymmetric supercapacitor(ASC)is assembled using DAAQ-M/G as the negative electrode and self-prepared organic molecule hydroquinone modified reduced graphene oxide(HQ-RGO)material as the positive electrode,with a high energy density of 43 Wh kg^(-1)at high power density of 1669 Wkg^(-1).The ASC can maintain 80%of initial specific capacitance after 9000 cycles.This research can provide better support to develop advanced organic molecules-modified MXene composite materials for ionic liquid-based SCs.展开更多
Flexible electronics are transforming our lives by making daily activities more convenient.Central to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabricati...Flexible electronics are transforming our lives by making daily activities more convenient.Central to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabrication,low-power consumption,fast response times,and versatility.Graphene,known for its exceptional mechanical properties,high electron mobility,and biocompatibility,is an ideal material for FET channels and sensors.The combination of graphene and FETs has given rise to flexible graphene field-effect transistors(FGFETs),driving significant advances in flexible electronics and sparked a strong interest in flexible biomedical sensors.Here,we first provide a brief overview of the basic structure,operating mechanism,and evaluation parameters of FGFETs,and delve into their material selection and patterning techniques.The ability of FGFETs to sense strains and biomolecular charges opens up diverse application possibilities.We specifically analyze the latest strategies for integrating FGFETs into wearable and implantable flexible biomedical sensors,focusing on the key aspects of constructing high-quality flexible biomedical sensors.Finally,we discuss the current challenges and prospects of FGFETs and their applications in biomedical sensors.This review will provide valuable insights and inspiration for ongoing research to improve the quality of FGFETs and broaden their application prospects in flexible biomedical sensing.展开更多
Developing high-performance broadband microwave absorption material becomes an urgent concern in the field of electromagnetic protection.In this work,an ultralight magnetic composite foam was con-structed by electrost...Developing high-performance broadband microwave absorption material becomes an urgent concern in the field of electromagnetic protection.In this work,an ultralight magnetic composite foam was con-structed by electrostatic self-assembly of MXene on the surface of graphene skeletons,and subsequent hydrothermal anchoring of flower-shaped FeS clusters.Under the synergistic effect of MXene coating in-creasing conductive loss and FeS clusters improving magnetic loss,the rational construction of hierarchi-cal impedance structure in foam can effectively promote the entrance and consumption of more incident electromagnetic waves.The minimum reflection loss(RL min)reaches-47.17 dB at a thickness of 4.78 mm,and the corresponding effective absorption bandwidth(EAB)is up to 6.15 GHz.More importantly,the microwave absorption performance of composite foam can be further optimized by controlling the load-ing of MXene and thermal treatment at a low temperature.The maximum of EAB for GMF-300 can be extended to an unprecedented value of 11.20 GHz(covering 6.10-17.30 GHz).展开更多
Today,self-healing graphene-and MXene-based composites have attracted researchers due to the increase in durability as well as the cost reduction in long-time applications.Different studies have focused on designing n...Today,self-healing graphene-and MXene-based composites have attracted researchers due to the increase in durability as well as the cost reduction in long-time applications.Different studies have focused on designing novel self-healing graphene-and MXenebased composites with enhanced sensitivity,stretchability,and flexibility as well as improved electrical conductivity,healing efficacy,mechanical properties,and energy conversion efficacy.These composites with self-healing properties can be employed in the field of wearable sensors,supercapacitors,anticorrosive coatings,electromagnetic interference shielding,electronic-skin,soft robotics,etc.However,it appears that more explorations are still needed to achieve composites with excellent arbitrary shape adaptability,suitable adhesiveness,ideal durability,high stretchability,immediate self-healing responsibility,and outstanding electromagnetic features.Besides,optimizing reaction/synthesis conditions and finding suitable strategies for functionalization/modification are crucial aspects that should be comprehensively investigated.MXenes and graphene exhibited superior electrochemical properties with abundant surface terminations and great surface area,which are important to evolve biomedical and sensing applications.However,flexibility and stretchability are important criteria that need to be improved for their future applications.Herein,the most recent advancements pertaining to the applications and properties of self-healing graphene-and MXene-based composites are deliberated,focusing on crucial challenges and future perspectives.展开更多
Designing and fabricating efficient electromagnetic interference(EMI)shielding materials becomes a significant and urgent concern.Hence,a novel ultrathin,flexible,and oxidation-resistant MXene-based graphene(M-rGX)por...Designing and fabricating efficient electromagnetic interference(EMI)shielding materials becomes a significant and urgent concern.Hence,a novel ultrathin,flexible,and oxidation-resistant MXene-based graphene(M-rGX)porous film is successfully fabricated by electrostatic self-assembly between MXene and graphene oxide(GO)nanosheets,and subsequently thermal annealing under hydrogen-argon atmosphere.The rapid breakaway of functional groups on GO and MXene sheets induces formation of porous conductive network in film,thereby facilitating efficient shielding for incident electromagnetic waves.The optimal absolute shielding effectiveness(SSE/t)value of 76,422 dB·cm2·g−1 can be achieved at a thinner thickness of 15μm.More importantly,the effective removal of functional groups on MXene conspicuously improves the oxidation resistance of the film,endowing it with an excellent durability(12 months)in EMI shielding performance.展开更多
MXenes,transition metal carbides and nitrides with graphene-like structures,have received considerable attention since their first discovery.On the other hand,Graphene has been extensively used in biomedical and medic...MXenes,transition metal carbides and nitrides with graphene-like structures,have received considerable attention since their first discovery.On the other hand,Graphene has been extensively used in biomedical and medicinal applications.MXene and graphene,both as promising candidates of two-dimensional materials,have shown to possess high potential in future biomedical applications due to their unique physicochemical properties such as superior electrical conductivity,high biocompatibility,large surface area,optical and magnetic features,and extraordinary thermal and mechanical properties.These special structural,functional,and biological characteristics suggest that the hybrid/composite structure of MXene and graphene would be able to meet many unmet needs in different fields;particularly in medicine and biomedical engineering,where high-performance mechanical,electrical,thermal,magnetic,and optical requirements are necessary.However,the hybridization and surface functionalization should be further explored to obtain biocompatible composites/platforms with unique physicochemical properties,high stability,and multifunctionality.In addition,toxicological and long-term biosafety assessments and clinical translation evaluations should be given high priority in research.Although very limited studies have revealed the excellent potentials of MXene/graphene in biomedicine,the next steps should be toward the extensive research and detailed analysis in optimizing the properties and improving their functionality with a clinical and industrial outlook.Herein,different synthesis/fabrication methods and performances of MXene/graphene composites are discussed for potential biomedical applications.The potential toxicological effects of these composites on human cells and tissues are also covered,and future perspectives toward more successful translational applications are presented.The current state-of-the-art biotechnological advances in the use of MXene-Graphene composites,as well as their developmental challenges and future prospects are also deliberated.Due to the superior properties and multifunctionality of MXene-graphene composites,these hybrid structures can open up considerable new horizons in future of healthcare and medicine.展开更多
With vigorous developments in nanotechnology,the elaborate regulation of microstructure shows attractive potential in the design of electromagnetic wave absorbers.Herein,a hierarchical porous structure and composite h...With vigorous developments in nanotechnology,the elaborate regulation of microstructure shows attractive potential in the design of electromagnetic wave absorbers.Herein,a hierarchical porous structure and composite heterogeneous interface are constructed successfully to optimize the electromagnetic loss capacity.The macro–micro-synergistic graphene aerogel formed by the ice template‑assisted 3D printing strategy is cut by silicon carbide nanowires(SiC_(nws))grown in situ,while boron nitride(BN)interfacial structure is introduced on graphene nanoplates.The unique composite structure forces multiple scattering of incident EMWs,ensuring the combined effects of interfacial polarization,conduction networks,and magnetic-dielectric synergy.Therefore,the as-prepared composites present a minimum reflection loss value of−37.8 dB and a wide effective absorption bandwidth(EAB)of 9.2 GHz(from 8.8 to 18.0 GHz)at 2.5 mm.Besides,relying on the intrinsic high-temperature resistance of SiC_(nws) and BN,the EAB also remains above 5.0 GHz after annealing in air environment at 600℃ for 10 h.展开更多
The technique of electrocatalytic hydrogen evolution reaction (HER) represents a development trend of clean energy generation and conversion,while the electrode catalysts are bound to be the core unit in the electroch...The technique of electrocatalytic hydrogen evolution reaction (HER) represents a development trend of clean energy generation and conversion,while the electrode catalysts are bound to be the core unit in the electrochemical HER system.Herein,we demonstrate a bottom-up approach to the construction of three-dimensional (3D) interconnected ternary nanoarchitecture originated from Ti_(3)C_(2)T_(x)MXene,graphitic carbon nitride nanosheets and graphene (MX/CN/RGO) through a convenient co-assembly process.By virtue of the 3D porous frameworks with ultrathin walls,large specific surface areas,optimized electronic structures,high electric conductivity,the resulting MX/CN/RGO nanoarchitecture expresses an exceptional HER performance with a low onset potential of only 38 m V,a small Tafel slop of 76 m V dec^(-1) as well as long lifespan,all of which are more competitive than those of the bare Ti_(3)C_(2)T_(x),g-C_(3)N_(4),graphene as well as binary MX/RGO and CN/RGO electrocatalysts.Theoretical simulations further verify that the ternary MX/CN/RGO nanoarchitecture with ameliorative band structure is able to facilitate the electron transport and meanwhile offer multistage catalytically active sites,thereby guaranteeing rapid HER kinetics during the electrocatalytic process.展开更多
基金the National Natural Science Foundation of China (No. 52073168) for financially supporting this work
文摘The multi-functionalization of polymer composites refers to the ability to connect multiple properties through simple structural design and simultaneously achieve multi-performance optimization.The large-scale design and mass production to realize the reasonable structure design of multifunctional polymer composites are urgently remaining challenges.Herein,the multifunctional MXene/graphene/polymer composites with three-dimensional thermally and electrically conductive network structures are fabricated via the utilization of the microstructure of the soft template,and a facile dispersion dip-coating approach.As a result,the polymer composites have a multiperformance improvement.At the MXene and graphene content of 18.7 wt%,the superior throughplane thermal conductivity of polymer composite is 2.44 W m^(−1)K^(−1),which is 1118%higher than that of the polymer matrix.The electromagnetic interference(EMI)shielding effectiveness of the sample reaches 43.3 dB in the range of X-band.And the mechanical property of the sample has advanced 4 times compared with the polymer matrix.The excellent EMI shielding and thermal management performance,along with the effortless and easy-to-scalable producing techniques,imply promising perspectives of the polymer composites in the next-generation smart electronic devices.
基金supported by Zhejiang Provincial Key Research and Development Program(2021C01004)National Key Research and Development Program of China(No.2021YFE0100500,2021YFB3501504)Zhejiang Provincial Natural Science Foundation(LQ22E030003),Guangdong Basic and Applied Basic Research Foundation(2020A1515110005).
文摘Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption.However,avoiding agglomeration and achieving layer-by-layer ordered intercalation remain chal-lenging.Here,3D reduced graphene oxide(rGO)/MXene/TiO_(2)/Fe_(2)C lightweight porous microspheres with periodical intercalated structures and pronounced inter-facial effects were constructed by spray-freeze-drying and microwave irradiation based on the Maxwell–Wagner effect.Such approach reinforced interfacial effects via defects introduction,porous skeleton,multi-layer assembly and multi-compo-nent system,leading to synergistic loss mechanisms.The abundant 2D/2D/0D/0D intercalated heterojunctions in the microspheres provide a high density of polari-zation charges while generating abundant polarization sites,resulting in boosted interfacial polarization,which is verified by CST Microwave Studio simulations.By precisely tuning the 2D nanosheets intercalation in the heterostructures,both the polarization loss and impedance matching improve significantly.At a low filler loading of 5 wt%,the polarization loss rate exceeds 70%,and a minimum reflection loss(RLmin)of-67.4 dB can be achieved.Moreover,radar cross-section simulations further confirm the attenuation ability of the optimized porous microspheres.These results not only provide novel insights into understanding and enhancing interfacial effects,but also constitute an attractive platform for implementing heterointerface engineering based on customized 2D hierarchical architectures.
基金financially supported by the National Natural Science Foundation of China(NSFC,no.52472305,no.52173265,no.52302087 and no.52403049)the Science and Technology Planning Project of Sichuan Province(no.2023NSFSC1952 and 2022ZYD0028)+1 种基金the Central Government Guides the Local Science and Technology Development Special Funds,Innovation and Technology Commission-Hong Kong(no.2021Szvup124)the Fundamental Research Funds for the Central Universities(nos.2682021GF004 and 2682022CG005)to freely explore basic research projects.
文摘Fabrics have attracted significant attention in the field of electromagnetic shielding due to their unique grid structure,high electrical conductivity,and flexibility.To enrich the research of textiles for microwave absorption,two-dimensional transition metal carbide(MXene)-enhanced reduced graphene oxide-based fabrics(MXene/RGO fabrics)were synthesized in this paper by using wet spinning–ionic cross-linking–chemical reduction strategy.MXene/RGO fabrics achieve a minimum reflection loss of−58.3 dB at 17.6 GHz and a thickness of 2.4 mm,with an effective absorption bandwidth of 4.92 GHz.In addition,the combination of electromagnetic finite element simulation technology and test results was used to further elucidate the response mode and loss mechanism of MXene/RGO fabrics.The MXene/RGO composite fibers exhibit a tuned attenuation ability and impedance matching performance,which is attributed to the increased polarization relaxation loss caused by the large number of heterogeneous interfaces between RGO,MXene,and TiO2 particles,as well as the appropriate electrical conductivity(16.6 S/cm).MXene/RGO fibers exhibit excellent microwave absorption performance,mechanical strength(534 MPa),easy modification,and fatigue resistance,promising stable absorption of electromagnetic waves in complex environments,thereby expanding the application scenarios of fabrics in the field of microwave absorption.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金the support from the National Natural Science Foundation of China(52473083,52373089,52403085)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Natural Science Basic Research Plan in Shaanxi Province of China(2024JC-YBMS-279)Natural Science Foundation of Chongqing,China(2023NSCQMSX2547)
文摘With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金Funded by Hunan Provincial Natural Science Foundation(No.2023JJ40074)Hunan Provincial Education Department Excellent Youth Project(No.21B0757)Hunan Provincial Engineering Technology Center(No.2022TP2036)。
文摘In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.
基金supported by the National Natural Science Foundation of China(52276196)the Foundation of State Key Laboratory of Coal Combustion(FSKLCCA2508)the High-level Talent Foundation of Anhui Agricultural University(rc412307).
文摘Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.
基金supported by the National Natural Science Foundation of China(Nos.52471156,U20A20274,and 52071158)the China Postdoctoral Science Foundation(Nos.2024M751173 and 2024M752703)+1 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent,China(No.2024ZB229)the Natural Science Foundation of Jiangsu Higher Education Institutions,China(No.24KJB430012).
文摘This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.
基金supported by the National Natural Science Foundation of China(22078251,21706197)the Open Project of Hubei Key Laboratory of Novel Reactor and Green Chemical Technology(NRG202407)+1 种基金the Ministry-of-Education,Key Laboratory for the Synthesis and Application of Organic Functional Molecules(KLSAOFM2511)the Graduate Innovative Fund of Wuhan Institute of Technology(CX2023024)。
文摘The emerging two-dimensional(2D)membranes offer a promising way to improve the water desalination performance of traditional membranes.MXene/graphene oxide(GO) composite membrane are known for their high separation performance and structural stability.In this study,molecular simulations are performed to investigate the desalination performance of the 2D MXene/GO membrane.The results reveal that the surface of the MXene nanosheet could induce the formation of ordered water structures,thereby accelerating the water transport in the 2D membrane.The higher rejection rate would be found in MXene/GO membrane with a larger GO oxidation degree owing to the sterichindrance effect induced by the functional groups on the GO surface.Overall,the MXene/GO(20) membrane with the interlayer spacing of 0.9 nm shows the highest water permeability(37.22×10^(-7)L·m^(-1)·h^(-1)·bar^(-1),1 bar=0.1 MPa)and a salt rejection of 100%.The results could provide theoretical insights for developing 2D membranes for water desalination.
基金supported by the National Natural Science Foundation of China(Nos.22173028,21873026).
文摘Due to insufficient energy density,supercapacitors(SCs)with preeminent-power and long cycle stability cannot be implemented in some practical applications.Exploring hybrid materials with redox activity to emerge high specific capacitance in ionic liquid(IL)electrolytes can solve this problem.Herein,we report a redox-organic molecule 2,6-diaminoanthraquinone(DAAQ)modified MXene(Ti3C2Tx)/Graphene(DAAQ-M/G)composite material.With the assist of graphene oxide(GO),MXene and graphene fabricate a three-dimensional(3D)interconnected structure as a conductive framework,which inhibits self-stacking of MXene monolayers and ensures high electronic conductivity.Meanwhile,DAAQ is loaded onto the M/G framework through covalent/non-covalent functionalization.The DAAQ as a spacer effectively enlarges the interlayer spacing of MXene nanosheets,and meanwhile produces reversible redox reactions during charge/discharge processes to provide additional Faradaic contribution to capacity.Therefore,the specific capacitance(capacity)of the DAAQ-M/G as the negative electrode material reaches to 226 F g^(-1)(306 C g^(-1))at 1 A g^(-1)in 1-ethyl-3-methylimidazolium tetrafluoroborate(EmimBF4)electrolyte.Furthermore,an asymmetric supercapacitor(ASC)is assembled using DAAQ-M/G as the negative electrode and self-prepared organic molecule hydroquinone modified reduced graphene oxide(HQ-RGO)material as the positive electrode,with a high energy density of 43 Wh kg^(-1)at high power density of 1669 Wkg^(-1).The ASC can maintain 80%of initial specific capacitance after 9000 cycles.This research can provide better support to develop advanced organic molecules-modified MXene composite materials for ionic liquid-based SCs.
基金supported by the National Key R&D Plan of China(Grant No.2023YFB3210400)the National Natural Science Foundation of China(No.62174101)+2 种基金the Major Scientific and Technological Innovation Project of Shandong Province(2021CXGC010603)the Fundamental Research Funds of Shandong University(2020QNQT001)Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong,Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong,the Natural Science Foundation of Qingdao-Original exploration project(No.24-4-4-zrjj-139-jch).
文摘Flexible electronics are transforming our lives by making daily activities more convenient.Central to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabrication,low-power consumption,fast response times,and versatility.Graphene,known for its exceptional mechanical properties,high electron mobility,and biocompatibility,is an ideal material for FET channels and sensors.The combination of graphene and FETs has given rise to flexible graphene field-effect transistors(FGFETs),driving significant advances in flexible electronics and sparked a strong interest in flexible biomedical sensors.Here,we first provide a brief overview of the basic structure,operating mechanism,and evaluation parameters of FGFETs,and delve into their material selection and patterning techniques.The ability of FGFETs to sense strains and biomolecular charges opens up diverse application possibilities.We specifically analyze the latest strategies for integrating FGFETs into wearable and implantable flexible biomedical sensors,focusing on the key aspects of constructing high-quality flexible biomedical sensors.Finally,we discuss the current challenges and prospects of FGFETs and their applications in biomedical sensors.This review will provide valuable insights and inspiration for ongoing research to improve the quality of FGFETs and broaden their application prospects in flexible biomedical sensing.
基金supported by the National Natu-ral Science Foundation of China(Nos.52003106,21674019)the Fundamental Research Funds for the Central Universities(Nos.JUSRP12032,2232019A3-03)+1 种基金the China Postdoctoral Science Foun-dation(No.2021M691265),the Ministry of Education of the Peo-ple’s Republic of China(No.6141A0202202)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Nos.KYCX22_2319,SJCX22_1110).
文摘Developing high-performance broadband microwave absorption material becomes an urgent concern in the field of electromagnetic protection.In this work,an ultralight magnetic composite foam was con-structed by electrostatic self-assembly of MXene on the surface of graphene skeletons,and subsequent hydrothermal anchoring of flower-shaped FeS clusters.Under the synergistic effect of MXene coating in-creasing conductive loss and FeS clusters improving magnetic loss,the rational construction of hierarchi-cal impedance structure in foam can effectively promote the entrance and consumption of more incident electromagnetic waves.The minimum reflection loss(RL min)reaches-47.17 dB at a thickness of 4.78 mm,and the corresponding effective absorption bandwidth(EAB)is up to 6.15 GHz.More importantly,the microwave absorption performance of composite foam can be further optimized by controlling the load-ing of MXene and thermal treatment at a low temperature.The maximum of EAB for GMF-300 can be extended to an unprecedented value of 11.20 GHz(covering 6.10-17.30 GHz).
文摘Today,self-healing graphene-and MXene-based composites have attracted researchers due to the increase in durability as well as the cost reduction in long-time applications.Different studies have focused on designing novel self-healing graphene-and MXenebased composites with enhanced sensitivity,stretchability,and flexibility as well as improved electrical conductivity,healing efficacy,mechanical properties,and energy conversion efficacy.These composites with self-healing properties can be employed in the field of wearable sensors,supercapacitors,anticorrosive coatings,electromagnetic interference shielding,electronic-skin,soft robotics,etc.However,it appears that more explorations are still needed to achieve composites with excellent arbitrary shape adaptability,suitable adhesiveness,ideal durability,high stretchability,immediate self-healing responsibility,and outstanding electromagnetic features.Besides,optimizing reaction/synthesis conditions and finding suitable strategies for functionalization/modification are crucial aspects that should be comprehensively investigated.MXenes and graphene exhibited superior electrochemical properties with abundant surface terminations and great surface area,which are important to evolve biomedical and sensing applications.However,flexibility and stretchability are important criteria that need to be improved for their future applications.Herein,the most recent advancements pertaining to the applications and properties of self-healing graphene-and MXene-based composites are deliberated,focusing on crucial challenges and future perspectives.
基金We are gratefully for the financial support from the National Natural Science Foundation of China(Nos.52003106,21674019,and 52161135302)the Fundamental Research Funds for the Central Universities(Nos.JUSRP12032 and 2232019A3-03)+4 种基金the Research Foundation Flanders(No.G0F2322N)China Postdoctoral Science Foundation(No.2021M691265)Ministry of Education of the People’s Republic of China(No.6141A0202202)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Nos.KYCX22_2319 and SJCX22_1110)Innovation Program of Shanghai Municipal Education Commission(No.2021-01-07-00-03-E00108).
文摘Designing and fabricating efficient electromagnetic interference(EMI)shielding materials becomes a significant and urgent concern.Hence,a novel ultrathin,flexible,and oxidation-resistant MXene-based graphene(M-rGX)porous film is successfully fabricated by electrostatic self-assembly between MXene and graphene oxide(GO)nanosheets,and subsequently thermal annealing under hydrogen-argon atmosphere.The rapid breakaway of functional groups on GO and MXene sheets induces formation of porous conductive network in film,thereby facilitating efficient shielding for incident electromagnetic waves.The optimal absolute shielding effectiveness(SSE/t)value of 76,422 dB·cm2·g−1 can be achieved at a thinner thickness of 15μm.More importantly,the effective removal of functional groups on MXene conspicuously improves the oxidation resistance of the film,endowing it with an excellent durability(12 months)in EMI shielding performance.
基金support from the National Institute of Biomedical Imaging and Bioengineering (5T32EB009035)
文摘MXenes,transition metal carbides and nitrides with graphene-like structures,have received considerable attention since their first discovery.On the other hand,Graphene has been extensively used in biomedical and medicinal applications.MXene and graphene,both as promising candidates of two-dimensional materials,have shown to possess high potential in future biomedical applications due to their unique physicochemical properties such as superior electrical conductivity,high biocompatibility,large surface area,optical and magnetic features,and extraordinary thermal and mechanical properties.These special structural,functional,and biological characteristics suggest that the hybrid/composite structure of MXene and graphene would be able to meet many unmet needs in different fields;particularly in medicine and biomedical engineering,where high-performance mechanical,electrical,thermal,magnetic,and optical requirements are necessary.However,the hybridization and surface functionalization should be further explored to obtain biocompatible composites/platforms with unique physicochemical properties,high stability,and multifunctionality.In addition,toxicological and long-term biosafety assessments and clinical translation evaluations should be given high priority in research.Although very limited studies have revealed the excellent potentials of MXene/graphene in biomedicine,the next steps should be toward the extensive research and detailed analysis in optimizing the properties and improving their functionality with a clinical and industrial outlook.Herein,different synthesis/fabrication methods and performances of MXene/graphene composites are discussed for potential biomedical applications.The potential toxicological effects of these composites on human cells and tissues are also covered,and future perspectives toward more successful translational applications are presented.The current state-of-the-art biotechnological advances in the use of MXene-Graphene composites,as well as their developmental challenges and future prospects are also deliberated.Due to the superior properties and multifunctionality of MXene-graphene composites,these hybrid structures can open up considerable new horizons in future of healthcare and medicine.
基金sponsored by National Natural Science Foundation of China(No.52302121,No.52203386)Shanghai Sailing Program(No.23YF1454700)+1 种基金Shanghai Natural Science Foundation(No.23ZR1472700)Shanghai Post-doctoral Excellent Program(No.2022664).
文摘With vigorous developments in nanotechnology,the elaborate regulation of microstructure shows attractive potential in the design of electromagnetic wave absorbers.Herein,a hierarchical porous structure and composite heterogeneous interface are constructed successfully to optimize the electromagnetic loss capacity.The macro–micro-synergistic graphene aerogel formed by the ice template‑assisted 3D printing strategy is cut by silicon carbide nanowires(SiC_(nws))grown in situ,while boron nitride(BN)interfacial structure is introduced on graphene nanoplates.The unique composite structure forces multiple scattering of incident EMWs,ensuring the combined effects of interfacial polarization,conduction networks,and magnetic-dielectric synergy.Therefore,the as-prepared composites present a minimum reflection loss value of−37.8 dB and a wide effective absorption bandwidth(EAB)of 9.2 GHz(from 8.8 to 18.0 GHz)at 2.5 mm.Besides,relying on the intrinsic high-temperature resistance of SiC_(nws) and BN,the EAB also remains above 5.0 GHz after annealing in air environment at 600℃ for 10 h.
基金financially supported by the National Natural Science Foundation of China(51802077)the Fundamental Research Funds for the Central Universities(B200202129 and B210202093)the Nantong Science and Technology Bureau(JC2019086 and JC2019003)。
文摘The technique of electrocatalytic hydrogen evolution reaction (HER) represents a development trend of clean energy generation and conversion,while the electrode catalysts are bound to be the core unit in the electrochemical HER system.Herein,we demonstrate a bottom-up approach to the construction of three-dimensional (3D) interconnected ternary nanoarchitecture originated from Ti_(3)C_(2)T_(x)MXene,graphitic carbon nitride nanosheets and graphene (MX/CN/RGO) through a convenient co-assembly process.By virtue of the 3D porous frameworks with ultrathin walls,large specific surface areas,optimized electronic structures,high electric conductivity,the resulting MX/CN/RGO nanoarchitecture expresses an exceptional HER performance with a low onset potential of only 38 m V,a small Tafel slop of 76 m V dec^(-1) as well as long lifespan,all of which are more competitive than those of the bare Ti_(3)C_(2)T_(x),g-C_(3)N_(4),graphene as well as binary MX/RGO and CN/RGO electrocatalysts.Theoretical simulations further verify that the ternary MX/CN/RGO nanoarchitecture with ameliorative band structure is able to facilitate the electron transport and meanwhile offer multistage catalytically active sites,thereby guaranteeing rapid HER kinetics during the electrocatalytic process.
