In this work, the generalizing of the finite element method (FEM) of thermoplastic prepreg insert injection molding composites was investigated. The specimens were prepared using glass fiber/polyamidc 6 (GF/PA6) inser...In this work, the generalizing of the finite element method (FEM) of thermoplastic prepreg insert injection molding composites was investigated. The specimens were prepared using glass fiber/polyamidc 6 (GF/PA6) inserted prepreg, and their characteristics were investigated and compared under ANSYS workbench program. The prediction of the bending initial fracture point under analytical tensile testing with interlayer on prepreg insert moldings was focused. It was found that the bending initial fracture point was applied to predict by matching the shear stress. There was obtained from analytical tensile testing and bending analysis. Therefore, it can be obtained the optimum of the clastic modulus ratio on the injection part/interlayer/insert part by using FEM via ANSYS workbench.展开更多
This study focuses on the insert-injection molding process. The thermoset composite inserts in this study were carbon fiber/epoxy (CF/Epoxy) prepreg sheets. The injected molded part was glass fiber contained phenolic ...This study focuses on the insert-injection molding process. The thermoset composite inserts in this study were carbon fiber/epoxy (CF/Epoxy) prepreg sheets. The injected molded part was glass fiber contained phenolic resin (GF/PF). The CF/Epoxy was placed in the mold cavity prior to injecting GF/PF onto the inserted injection molded CF/Epoxy specimens. The role of adhesion between the inserted part and injected resin on the mechanical properties was evaluated by 3 point bending and impact tests. In addition, the effect of prepreg orientation on the mechanical properties of the prepreg inserted-injection molding system was investigated. It was found that the prepreg with unidirectional orientation significantly improved flexural and impact strength of the inserted injection molding composites, providing better support and resistance to bending and impact loading. The main failure modes of the specimens were structural and adhesive failure.展开更多
The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerge...The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerged entry nozzles,form floaters in the molds,and produce various surface defects on the cast slabs.This review summarizes the effects of nonmetallic inclusions on traditional CaO-SiO_(2)-based(CS)mold fluxes and novel CaO-Al_(2)O_(3)-based(CA)low-or non-reactive fluxes containing TiO_(2),BaO,and B_(2)O_(3)additives to avoid undesirable steel,slag,and inclusion reactions,with the aim of providing a new perspective for research and practice related to balancing the lubrication and heat transfer of mold fluxes to promote smooth operation and reduce surface defects on cast slabs.For traditional CS mold flux,although the addition of solvents such as Na_(2)O,Li_(2)O,and B_(2)O_(3)can enhance flowability,steel-slag reactions persist,limiting the effectiveness of CS mold fluxes in high-Ti steel casting.Low-or non-reactive CA mold fluxes with reduced SiO_(2)content are a research focus,where adding other components can significantly change flux characteristics.Replacing CaO with BaO can lower the melting point and inhibit crystallization,allowing the flux to maintain good flowability at low temperatures.Replacing SiO_(2)with TiO_(2)can stabilize the viscosity and enhance heat transfer.To reduce the environmental impact,fluorides are replaced with components such as TiO_(2),B_(2)O_(3),BaO,Li_(2)O,and Na_(2)O for F-frce mold fluxes with similar lubrication,crystallization,and heat-transfer effects.When TiO_(2)replaces CaF_(2),it stabilizes the viscosity and enhances the heat conductivity,forming CaTiO_(3)and CaSiTiO_(5)phases instead of cuspidine to control crystallization.B_(2)O_(3)lowers the melting point and suppresses crystallization,forming phases such as Ca_(3)B_(2)O_(6)and Ca_(11)Si_(4)B_(2)O_(22).BaO introduces non-bridging oxygen to reduce viscosity and ensure flux flowability at low temperatures.However,further studies are required to determine the optimal mold flux compositions corresponding to the steel grades and the interactions between the various components of the mold flux.In the future,the practical application of new mold fluxes for high-Ti steel will become the focus of further verification to achieve a balance between lubrication and heat transfer,which is expected to minimize the occurrence of casting problems and slab defects.展开更多
Laser powder bed fusion(LPBF)is highly suitable for forming 18Ni300 mold steel,thanks to its excellent capability in manufacturing complex shapes and outstanding capacity for regulating microstructures.It is widely us...Laser powder bed fusion(LPBF)is highly suitable for forming 18Ni300 mold steel,thanks to its excellent capability in manufacturing complex shapes and outstanding capacity for regulating microstructures.It is widely used in fields such as injection molding,die casting,and stamping dies.Adding reinforcing particles into steel is an effective means to improve its performance.Nb/18Ni300 composites were fabricated by LPBF using two kinds of Nb powders with different particle sizes,and their microstructures and properties were studied.The results show that the unmelted Nb particles are uniformly distributed in the 18Ni300 matrix and the grains are refined,which is particularly pronounced with fine Nb particles.In addition,element diffusion occurs between the particles and the matrix.The main phases of the base alloy are α-Fe and a small amount of γ-Fe.With the addition of Nb,part of the α-Fe is transformed into γ-Fe,and unmelted Nb phases appear.The addition of Nb also enhances the hardness and wear resistance of the composites but slightly reduces their tensile properties.After aging treatment,the molten pools and grain boundaries become blurred,grains are further refined,and the interfaces around the particles are thinned.The aging treatment also promotes the formation of reverted austenite.The hardness,ultimate tensile strength,and volumetric wear rate of the base alloy reach 51.9 HRC,1704 MPa,and 17.8×10^(-6) mm^(3)/(N·m),respectively.In contrast,the sample added with fine Nb particles has the highest hardness(56.1 HRC),ultimate tensile strength(1892 MPa)and yield strength(1842 MPa),and the volume wear rate of the sample added with coarse Nb particles is reduced by 90%to 1.7×10^(-6) mm^(3)/(N·m).展开更多
The dissolution of MgO-refractory into the slag had an obvious influence on the steel-slag reaction and the slag property,especially for high-aluminum steels.The dissolution behavior of MgO-refractory was investigated...The dissolution of MgO-refractory into the slag had an obvious influence on the steel-slag reaction and the slag property,especially for high-aluminum steels.The dissolution behavior of MgO-refractory was investigated under various conditions,including the temperature,the initial steel composition,and the initial slag composition.A steel-slag-refractory kinetic model for high-aluminum steel was developed,which incorporated the process of MgO-refractory dissolution.The dependence of the MgO mass transfer coefficient k_(MgO)^(r)on temperature T during MgO-refractory dissolution process was established,as described by ln k_(MgO)^(r)=63,754/T+24.38524.It was indicated that the MgO dissolution rate was significantly influenced by the temperature.A higher temperature increased the dissolution rate of MgO.The initial steel composition had a slight impact on the MgO dissolution rate.Additionally,the initial slag composition strongly impacted the MgO saturation concentration and the dissolution rate.A lower initial Al_(2)O_(3)/SiO_(2)ratio increased the MgO dissolution rate.The steel-slag-refractory kinetic model accurately predicted the dissolution of MgO-refractory and the influence of dissolved MgO on the viscosity and composition change during steel-slag-refractory reactions.It was suggested that a higher temperature can hardly reduce the viscosity due to the dissolution of the MgO-refractory.展开更多
A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysi...A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysis of typical slag rims for two highly crystalline powders revealed that their formation was primarily driven by the solidification of the liquid slag.Distinct differences were observed in the microstructures of slag rims from the two powders.Powder A(characterized by a higher breaking temperature and viscosity)displayed alternating lamellar microstructures of coarse and fine phases,with the coarse phases composed of akermanite-gehlenite transition phases.In contrast,powder B(with a lower breaking temperature and viscosity)predominantly comprised regular akermanite-gehlenite crystals interspersed with a certain amount of glassy phases.Numerical simulations of a three-phase fluid flow coupled with heat transfer indicate that slag rim formation correlates with mold oscillation.Solidification of the liquid slag at the slag rim front predominantly occurs during the negative stroke of the mold oscillation.The average heating rate during the ascending stage of the mold reaches approximately 100 K·s^(−1),whereas the average cooling rate during the descending stage attains 400 K·s^(−1).This temperature variation leads to the formation of lamellar microstructures,whereas the ascending stage promotes the formation of coarse structures and thicker slag rims.Based on the powder properties,two distinct formation pathways exist for highly crystalline mold powders.For the powders with a higher breaking temperature,higher viscosity,and narrower solidification range(powder A),coarse microstructures and thicker slag rims were preferentially formed.For powders with lower breaking temperature and viscosity and wider solidification ranges(powder B),the liquid slag resisted rapid solidification,and the extended mushy zone allowed the partial liquid slag to persist at the slag rim front,promoting the formation of a thin slag rim.This study enhances the understanding of slag rim formation in highly crystalline mold powders and provides critical insights into the control of longitudinal surface cracks in hypo-peritectic steel.展开更多
Carbon-fiber-reinforced plastics(CFRP)with improved mechanical properties based on modified epoxy binders were investigated in this study.By adding 15 parts by weight(p.b.w.)of copolymer of polysulfone with cardo phth...Carbon-fiber-reinforced plastics(CFRP)with improved mechanical properties based on modified epoxy binders were investigated in this study.By adding 15 parts by weight(p.b.w.)of copolymer of polysulfone with cardo phthalide group(PSFP-70C)to the epoxyanhydride binder,the flexural strength of the epoxy polymer was increased by 60%,the CFRP based on it by 57%,the flexural modulus of the epoxy polymer was increased by 83%,and the composite by 96%.The adhesion strength of the binder to carbon fiber reached a high level at 10 p.b.w.of thermoplastic modifier and increased by 65%compared to the unmodified binder.Scanning electron microscopy(SEM)was used to determine that in epoxyanhydride systems with a polysulfone content of 5–15 p.b.w.,the structure belongs to the"matrix dispersion"type and with a content of 20 p.b.w.to the"interpenetrating phase"type.A heterogeneous structure was also observed using dynamic mechanical analysis.展开更多
The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was est...The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was established using large eddy simulation,the volume of fluid,and magnetohydrodynamics methods through numerical simulation.The maximum flow velocity and wave height at the steel-slag interface within the mold are critical evaluation criteria for analyzing asymmetric flow under varying casting speeds and electromagnetic braking.The results indicate that the asymmetric flows within the mold do not occur synchronously.The severity of the asymmetric flow correlates with the velocity difference across the steel-slag interface.A greater biased flow prolongs the time required to revert to a steady state.When the magnetic field intensity is set to 0.24 T and the magnetic pole position is at 390 mm from the steel-slag interface,this configuration can reduce the velocity of the steel-slag interface,thereby mitigating the asymmetric flow.Additionally,it can diminish the velocity,impact depth,and impact intensity on the narrow face of the jet,thus improving the distribution of velocity and turbulent kinetic energy within the mold.This configuration prolongs the time required for the steel-slag interface to transition from a stable state to its maximum velocity and shortens the time for the interface to return to stability from an unstable state.Moreover,it ensures the positional stability of the steel-slag interface,confining its position within−3 mm.展开更多
In order to investigate the effect of die wall thickness on morphologies of defect band,a stepped mold with a wall thickness of 5 mm,4 mm,3 mm,2 mm,and 1 mm was designed to carry out high pressure die casting experime...In order to investigate the effect of die wall thickness on morphologies of defect band,a stepped mold with a wall thickness of 5 mm,4 mm,3 mm,2 mm,and 1 mm was designed to carry out high pressure die casting experiments with AlSi10 MgMn alloy.For castings with wall thickness of 2-4 mm,the ratio of the mean defect band width(w)and mean grain size(d)in the defect band(w/d)ranges 7-18,while it increases to 24.47 for the 5 mm-thick casting.This difference is related with the filling speed and the distribution of externally solidified crystals(ESCs).The mold flow analysis indicates that the filling speed decreases from 25.41 m·s^(-1)to 11.07 m·s^(-1)when wall thickness increases from 2 mm to 5 mm.Due to the decreasing filling speed along the wall thickness,ESCs gradually diffuse from the center to the defect band,which keep the shear strength in the defect band at a high-level during filling.Meanwhile,the shear strength generated during the filling also decreases as the shear rate drops.Finally,the defect bands in the 5 mm-thick region become widen and indistinct,and the porosity is as high as 5.25%.展开更多
Although poly(lactic acid)(PLA)is a good environmentally-friendly bio-degradable polymer which is used to substitute traditional petrochemical-based polymer packaging films,the barrier properties of PLA films are stil...Although poly(lactic acid)(PLA)is a good environmentally-friendly bio-degradable polymer which is used to substitute traditional petrochemical-based polymer packaging films,the barrier properties of PLA films are still insufficient for high-barrier packaging applications.In this study,oxygen scavenger hydroxyl-terminated polybutadiene(HTPB)and cobalt salt catalyst were incorporated into the PLA/poly(butylene adipate-co-terephthalate)(PLA/PBAT),followed by melting extrusion and three-layer co-extrusion blown film process to prepare the composite films.The oxygen permeability coefficient of the composite film combined with 6 wt%oxygen scavenger and 0.4 wt%catalyst was decreased significantly from 377.00 cc·mil·m^(-2)·day^(-1)·0.1 MPa^(-1) to 0.98 cc·mil·m^(-2)·day^(-1)·0.1 MPa^(-1),showing a remarkable enhancement of 384.69 times compared with the PLA/PBAT composite film.Meanwhile,the degradation behavior of the composite film was also accelerated,exhibiting a mass loss of nearly 60%of the original mass after seven days of degradation in an alkaline environment,whereas PLA/PBAT composite film only showed a mass loss of 32%.This work has successfully prepared PLA/PBAT composite films with simultaneously improved oxygen barrier property and degradation behavior,which has great potential for high-demanding green chemistry packaging industries,including food,agricultural,and military packaging.展开更多
During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a rest...During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.展开更多
Flip-chip technology is widely used in integrated circuit(IC)packaging.Molded underfill transfer molding is the most common process for these products,as the chip and solder bumps must be protected by the encapsulatin...Flip-chip technology is widely used in integrated circuit(IC)packaging.Molded underfill transfer molding is the most common process for these products,as the chip and solder bumps must be protected by the encapsulating material to ensure good reliability.Flow-front merging usually occurs during the molding process,and air is then trapped under the chip,which can form voids in the molded product.The void under the chip may cause stability and reliability problems.However,the flow process is unobservable during the transfer molding process.The engineer can only check for voids in the molded product after the process is complete.Previous studies have used fluid visualization experiments and developed computational fluid dynamics simulation tools to investigate this issue.However,a critical gap remains in establishing a comprehensive three-dimensional model that integrates two-phase flow,accurate venting settings,and fluid surface tension for molded underfill void evaluation—validated by experimental fluid visualization.This study aims to address this gap in the existing literature.In this study,a fluid visualization experiment was designed to simulate the transfer molding process,allowing for the observation of flow-front merging and void formation behaviors.For comparison,a three-dimensional mold flow analysis was also performed.It was found that the numerical simulation of the trapped air compression process under the chip was more accurate when considering the capillary force.The effect of design factors is evaluated in this paper.The results show that the most important factors for void size are fluid viscosity,the gap height under the chip,transfer time,contact angle between the fluid and the contact surfaces,and transfer pressure.Specifically,a smaller gap height beneath the chip aggravates void formation,while lower viscosity,extended transfer time,reduced contact angle,and increased transfer pressure are effective in minimizing void size.The overall results of this study will be useful for product and process design in selecting appropriate solutions for IC packaging,particularly in the development of void-free molded-underfill flip-chip packages.These findings support the optimization of industrial packaging processes in semiconductor manufacturing by guiding material selection and process parameters,ultimately enhancing package reliability and yield.展开更多
This paper reviews the research progress on mold detection technologies in milk and dairy products,including rapid test sheet methods,molecular biological detection techniques,metabolomics detection techniques,enzyme-...This paper reviews the research progress on mold detection technologies in milk and dairy products,including rapid test sheet methods,molecular biological detection techniques,metabolomics detection techniques,enzyme-linked immunosorbent assay(ELISA),and microbial rapid photoelectric detection systems,aiming to provide optimal choices for mold detection.展开更多
Sorghum is an important cereal crop for smallholder farmers’ food security in many countries in West Africa. However, its production has stagnated due to several factors, such as anthracnose and grain molds. Thus, a ...Sorghum is an important cereal crop for smallholder farmers’ food security in many countries in West Africa. However, its production has stagnated due to several factors, such as anthracnose and grain molds. Thus, a study was conducted to identify local germplasms that combine high grain yield and resistance to anthracnose and grain molds under Senegalese environments. A set of 256 genotypes was assessed at Sefa, Sinthiou and Kolda research stations using an incomplete blocks design with two replications. Agro-morphological and phytopathological data were collected. The results revealed a huge phenotypic variation between the genotypes for all traits. The flowering time varied from 43 to 126 days after sowing, while the panicle length varied from 10 to 60 cm. The genotypes were generally more productive at Sinthiou (1653 Kg ha−1) compared to Kolda (164 kg ha−1) research stations. The disease parameters were significantly and positively associated, while the flowering time was strongly and positively associated to grain mold score. The genotypes were classified into three groups with plant height, panicle diameter and length, flowering time and grain mold score as the most discriminating parameters. The genotypes belonging to cluster 3, in addition of being more productive and more resistant to grain mold and anthracnose, have longer panicles. These genotypes present promising prospects for inclusion in breeding programs focused on advancing sorghum yield and disease resistance in Senegal.展开更多
A significant portion of losses in the fruit and vegetable sector are caused by the necrotrophic fungus Botrytis cinerea,due to its high prevalence in over 1000 crop species.Identifying a technology capable of exclusi...A significant portion of losses in the fruit and vegetable sector are caused by the necrotrophic fungus Botrytis cinerea,due to its high prevalence in over 1000 crop species.Identifying a technology capable of exclusively inhibiting its growth and development remains challenging;therefore,various treatments have been proposed to act synergistically in preventing the spread of this pathogen.The objective of this study was to evaluate an ultrasound-assisted treatment combined with chitosan to control the development of B.cinerea.In vitro analyses showed that combining temperature,ultrasound,and chitosan inhibited the fungal radial growth by 80%,reduced sporulation,and decreased germination.Electrolyte leak analysis indicated damage to the B.cinerea cell wall,causing intracellular material to escape into the environment.Scanning and transmission electron microscopy images also revealed severe structural damage,including loss of the cytoplasmic membrane and cell lysis.展开更多
The article explains the legal definition of the term‘repair’as used in cosmetic efficacy claims:it refers to the ability to help maintain the normal condition of the applied area.By analysing methods for modelling ...The article explains the legal definition of the term‘repair’as used in cosmetic efficacy claims:it refers to the ability to help maintain the normal condition of the applied area.By analysing methods for modelling skin damage,the paper comprehensively summarises the evaluation system for the‘repair’efficacy of cosmetics,introducing existing assessment methods for repair efficacy across different application areas,including facial care products,body care products,foot care products,scalp care products,hair care products,and lip care products.This aims to promote the standardisation and innovative development of repair-type cosmetics.展开更多
A coupled computational model of molten steel within the mold was developed,encompassing electromagnetic fields,fluid flow,heat transfer,shell formation,stress,and strain.The model was verified through comparison with...A coupled computational model of molten steel within the mold was developed,encompassing electromagnetic fields,fluid flow,heat transfer,shell formation,stress,and strain.The model was verified through comparison with plant measurements,showing reasonable agreement in electromagnetic field distribution,solidification endpoint,and shell thickness.Results indicate that coordinating the submerged entry nozzle(SEN)and mold electromagnetic stirring(M-EMS)effectively regulates the solidification quality of the initial shell.Adjusting M-EMS current frequency changes the impact position of the molten steel jet from the four-port SEN,while increasing current intensity reduces the jet impact intensity.Adjusting the M-EMS parameters can enhance the initial shell uniformity.Furthermore,in areas directly impacted by the steel jet from the four-port SEN,a relationship between brittle temperature range(BTR)width and total mechanical strain was found,and the larger the BTR width,the smaller the corresponding total mechanical strain.The BTR width provides a discriminant method to avoid hot tearing.Appropriate M-EMS parameters are obtained and applied,and the plant trials show a significant improvement in hot tearing near the surface of round blooms.展开更多
Interstitial oxygen(O)contamination remains a substantial challenge for metal injection molding(MIM)of titanium alloys.Herein,this critical problem is successfully addressed by regulating the thermal debinding tempera...Interstitial oxygen(O)contamination remains a substantial challenge for metal injection molding(MIM)of titanium alloys.Herein,this critical problem is successfully addressed by regulating the thermal debinding temperature and incorporating the oxygen scavenger LaB_(6).Results indicate that the surface oxide layer(with a thickness of(13.4±0.5)nm)of Ti_(6)Al4V powder begins to dissolve into the Ti matrix within the temperature range of 663–775℃.O contamination in MIM Ti alloys can be effectively mitigated by lowering the thermal debinding temperature and adding LaB6powder.As a result of reduced dissolved O content,the slips of mixedanddislocations are effectively accelerated,leading to improved ductility.Moreover,grain refinement,along with the in situ formation of Ti B whiskers and second-phase La_(2)O_(3)particles,enhances the strength of the material.The fabricated MIM Ti6Al4V sample exhibits excellent mechanical properties,achieving an ultimate tensile strength of(967±5)MPa,a yield strength of(866±8)MPa,and an elongation of 21.4%±0.7%.These tensile properties represent some of the best results reported in the literature for MIM Ti_(6)Al4V alloys.This study offers valuable insights into the development of high-performance MIM Ti alloys and other metal materials.展开更多
Continuous casting of high-titanium steels face significant challenges due to steel-flux reactions,which will cause rapid compositional deviations and impair operational stability.A kinetic model to predict real-time ...Continuous casting of high-titanium steels face significant challenges due to steel-flux reactions,which will cause rapid compositional deviations and impair operational stability.A kinetic model to predict real-time mold flux composition evolution by integrating multicomponent mixed-transport-control theory with thermodynamics computing platform was developed in the current study.The model employed a cyclic time-step algorithm to compute thermodynamic equilibrium in reaction layer,mass transfer flux between reaction and bulk layers,and composition updates in reaction and bulk layers.The accuracy of the model was validated by plant trial data.The effect of casting parameters and initial compositions on the evolution of mold flux composition were investigated.The TiO_(2)accumulation and SiO_(2)consumption in mold flux under varying casting parameters was predicted.It was found that higher casting speeds accelerated compositional equilibrium,while the increase of mold flux consumption rates reduced TiO_(2)accumulation.The increase of pool depth resulted in slower consumption and accumulation rates of components like SiO_(2)and TiO_(2),prolonging the time to reach equilibrium.Additionally,the CaO-Al_(2)O_(3)-based flux suppressed the Ti-SiO_(2)reaction for the high-titanium steel continuous casting.However,the CaO-Al_(2)O_(3)-based flux should limited contents of Na_(2)O,MnO,and FeO to prevent additional TiO_(2)accumulation due to Ti-Na_(2)O,Ti-MnO,and Ti-FeO reactions.The model provided a reliable tool for understanding and optimizing the continuous casting process of high-titanium steels.展开更多
文摘In this work, the generalizing of the finite element method (FEM) of thermoplastic prepreg insert injection molding composites was investigated. The specimens were prepared using glass fiber/polyamidc 6 (GF/PA6) inserted prepreg, and their characteristics were investigated and compared under ANSYS workbench program. The prediction of the bending initial fracture point under analytical tensile testing with interlayer on prepreg insert moldings was focused. It was found that the bending initial fracture point was applied to predict by matching the shear stress. There was obtained from analytical tensile testing and bending analysis. Therefore, it can be obtained the optimum of the clastic modulus ratio on the injection part/interlayer/insert part by using FEM via ANSYS workbench.
文摘This study focuses on the insert-injection molding process. The thermoset composite inserts in this study were carbon fiber/epoxy (CF/Epoxy) prepreg sheets. The injected molded part was glass fiber contained phenolic resin (GF/PF). The CF/Epoxy was placed in the mold cavity prior to injecting GF/PF onto the inserted injection molded CF/Epoxy specimens. The role of adhesion between the inserted part and injected resin on the mechanical properties was evaluated by 3 point bending and impact tests. In addition, the effect of prepreg orientation on the mechanical properties of the prepreg inserted-injection molding system was investigated. It was found that the prepreg with unidirectional orientation significantly improved flexural and impact strength of the inserted injection molding composites, providing better support and resistance to bending and impact loading. The main failure modes of the specimens were structural and adhesive failure.
基金financially supported by the National Natural Science Foundation of China(Nos.52204345 and 52474361)the Scientific Research Innovation Projects of Graduate Student of Jiangsu province,China(No.KYCX24_4184)。
文摘The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerged entry nozzles,form floaters in the molds,and produce various surface defects on the cast slabs.This review summarizes the effects of nonmetallic inclusions on traditional CaO-SiO_(2)-based(CS)mold fluxes and novel CaO-Al_(2)O_(3)-based(CA)low-or non-reactive fluxes containing TiO_(2),BaO,and B_(2)O_(3)additives to avoid undesirable steel,slag,and inclusion reactions,with the aim of providing a new perspective for research and practice related to balancing the lubrication and heat transfer of mold fluxes to promote smooth operation and reduce surface defects on cast slabs.For traditional CS mold flux,although the addition of solvents such as Na_(2)O,Li_(2)O,and B_(2)O_(3)can enhance flowability,steel-slag reactions persist,limiting the effectiveness of CS mold fluxes in high-Ti steel casting.Low-or non-reactive CA mold fluxes with reduced SiO_(2)content are a research focus,where adding other components can significantly change flux characteristics.Replacing CaO with BaO can lower the melting point and inhibit crystallization,allowing the flux to maintain good flowability at low temperatures.Replacing SiO_(2)with TiO_(2)can stabilize the viscosity and enhance heat transfer.To reduce the environmental impact,fluorides are replaced with components such as TiO_(2),B_(2)O_(3),BaO,Li_(2)O,and Na_(2)O for F-frce mold fluxes with similar lubrication,crystallization,and heat-transfer effects.When TiO_(2)replaces CaF_(2),it stabilizes the viscosity and enhances the heat conductivity,forming CaTiO_(3)and CaSiTiO_(5)phases instead of cuspidine to control crystallization.B_(2)O_(3)lowers the melting point and suppresses crystallization,forming phases such as Ca_(3)B_(2)O_(6)and Ca_(11)Si_(4)B_(2)O_(22).BaO introduces non-bridging oxygen to reduce viscosity and ensure flux flowability at low temperatures.However,further studies are required to determine the optimal mold flux compositions corresponding to the steel grades and the interactions between the various components of the mold flux.In the future,the practical application of new mold fluxes for high-Ti steel will become the focus of further verification to achieve a balance between lubrication and heat transfer,which is expected to minimize the occurrence of casting problems and slab defects.
基金Key-Area Research and Development Program of Guangdong Province(2023B0909020004)Project of Innovation Research Team in Zhongshan(CXTD2023006)+1 种基金Natural Science Foundation of Guangdong Province(2023A1515011573)Zhongshan Social Welfare Science and Technology Research Project(2024B2022)。
文摘Laser powder bed fusion(LPBF)is highly suitable for forming 18Ni300 mold steel,thanks to its excellent capability in manufacturing complex shapes and outstanding capacity for regulating microstructures.It is widely used in fields such as injection molding,die casting,and stamping dies.Adding reinforcing particles into steel is an effective means to improve its performance.Nb/18Ni300 composites were fabricated by LPBF using two kinds of Nb powders with different particle sizes,and their microstructures and properties were studied.The results show that the unmelted Nb particles are uniformly distributed in the 18Ni300 matrix and the grains are refined,which is particularly pronounced with fine Nb particles.In addition,element diffusion occurs between the particles and the matrix.The main phases of the base alloy are α-Fe and a small amount of γ-Fe.With the addition of Nb,part of the α-Fe is transformed into γ-Fe,and unmelted Nb phases appear.The addition of Nb also enhances the hardness and wear resistance of the composites but slightly reduces their tensile properties.After aging treatment,the molten pools and grain boundaries become blurred,grains are further refined,and the interfaces around the particles are thinned.The aging treatment also promotes the formation of reverted austenite.The hardness,ultimate tensile strength,and volumetric wear rate of the base alloy reach 51.9 HRC,1704 MPa,and 17.8×10^(-6) mm^(3)/(N·m),respectively.In contrast,the sample added with fine Nb particles has the highest hardness(56.1 HRC),ultimate tensile strength(1892 MPa)and yield strength(1842 MPa),and the volume wear rate of the sample added with coarse Nb particles is reduced by 90%to 1.7×10^(-6) mm^(3)/(N·m).
基金support from the National Key R&D Program of China(Grant No.2023YFB3709901)the National Natural Science Foundation of China(Grant No.U22A20171)+1 种基金China Baowu Low Carbon Metallurgy Innovation Foundation(Grant No.BWLCF202315)the High Steel Center(HSC)at North China University of Technology and University of Science and Technology Beijing,China.
文摘The dissolution of MgO-refractory into the slag had an obvious influence on the steel-slag reaction and the slag property,especially for high-aluminum steels.The dissolution behavior of MgO-refractory was investigated under various conditions,including the temperature,the initial steel composition,and the initial slag composition.A steel-slag-refractory kinetic model for high-aluminum steel was developed,which incorporated the process of MgO-refractory dissolution.The dependence of the MgO mass transfer coefficient k_(MgO)^(r)on temperature T during MgO-refractory dissolution process was established,as described by ln k_(MgO)^(r)=63,754/T+24.38524.It was indicated that the MgO dissolution rate was significantly influenced by the temperature.A higher temperature increased the dissolution rate of MgO.The initial steel composition had a slight impact on the MgO dissolution rate.Additionally,the initial slag composition strongly impacted the MgO saturation concentration and the dissolution rate.A lower initial Al_(2)O_(3)/SiO_(2)ratio increased the MgO dissolution rate.The steel-slag-refractory kinetic model accurately predicted the dissolution of MgO-refractory and the influence of dissolved MgO on the viscosity and composition change during steel-slag-refractory reactions.It was suggested that a higher temperature can hardly reduce the viscosity due to the dissolution of the MgO-refractory.
基金supported by the National Natural Science Foundation of China(No.52274318).
文摘A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysis of typical slag rims for two highly crystalline powders revealed that their formation was primarily driven by the solidification of the liquid slag.Distinct differences were observed in the microstructures of slag rims from the two powders.Powder A(characterized by a higher breaking temperature and viscosity)displayed alternating lamellar microstructures of coarse and fine phases,with the coarse phases composed of akermanite-gehlenite transition phases.In contrast,powder B(with a lower breaking temperature and viscosity)predominantly comprised regular akermanite-gehlenite crystals interspersed with a certain amount of glassy phases.Numerical simulations of a three-phase fluid flow coupled with heat transfer indicate that slag rim formation correlates with mold oscillation.Solidification of the liquid slag at the slag rim front predominantly occurs during the negative stroke of the mold oscillation.The average heating rate during the ascending stage of the mold reaches approximately 100 K·s^(−1),whereas the average cooling rate during the descending stage attains 400 K·s^(−1).This temperature variation leads to the formation of lamellar microstructures,whereas the ascending stage promotes the formation of coarse structures and thicker slag rims.Based on the powder properties,two distinct formation pathways exist for highly crystalline mold powders.For the powders with a higher breaking temperature,higher viscosity,and narrower solidification range(powder A),coarse microstructures and thicker slag rims were preferentially formed.For powders with lower breaking temperature and viscosity and wider solidification ranges(powder B),the liquid slag resisted rapid solidification,and the extended mushy zone allowed the partial liquid slag to persist at the slag rim front,promoting the formation of a thin slag rim.This study enhances the understanding of slag rim formation in highly crystalline mold powders and provides critical insights into the control of longitudinal surface cracks in hypo-peritectic steel.
基金financially supported by the Ministry of Science and Higher Education of the Russian Federation。
文摘Carbon-fiber-reinforced plastics(CFRP)with improved mechanical properties based on modified epoxy binders were investigated in this study.By adding 15 parts by weight(p.b.w.)of copolymer of polysulfone with cardo phthalide group(PSFP-70C)to the epoxyanhydride binder,the flexural strength of the epoxy polymer was increased by 60%,the CFRP based on it by 57%,the flexural modulus of the epoxy polymer was increased by 83%,and the composite by 96%.The adhesion strength of the binder to carbon fiber reached a high level at 10 p.b.w.of thermoplastic modifier and increased by 65%compared to the unmodified binder.Scanning electron microscopy(SEM)was used to determine that in epoxyanhydride systems with a polysulfone content of 5–15 p.b.w.,the structure belongs to the"matrix dispersion"type and with a content of 20 p.b.w.to the"interpenetrating phase"type.A heterogeneous structure was also observed using dynamic mechanical analysis.
基金support from the National Natural Science Foundation of China(Grant Nos.52174313 and 52304350)thank all members of the Hebei High Quality Steel Continuous Casting Engineering Technology Research Center at North China University of Science and Technology,Tangshan,China.
文摘The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was established using large eddy simulation,the volume of fluid,and magnetohydrodynamics methods through numerical simulation.The maximum flow velocity and wave height at the steel-slag interface within the mold are critical evaluation criteria for analyzing asymmetric flow under varying casting speeds and electromagnetic braking.The results indicate that the asymmetric flows within the mold do not occur synchronously.The severity of the asymmetric flow correlates with the velocity difference across the steel-slag interface.A greater biased flow prolongs the time required to revert to a steady state.When the magnetic field intensity is set to 0.24 T and the magnetic pole position is at 390 mm from the steel-slag interface,this configuration can reduce the velocity of the steel-slag interface,thereby mitigating the asymmetric flow.Additionally,it can diminish the velocity,impact depth,and impact intensity on the narrow face of the jet,thus improving the distribution of velocity and turbulent kinetic energy within the mold.This configuration prolongs the time required for the steel-slag interface to transition from a stable state to its maximum velocity and shortens the time for the interface to return to stability from an unstable state.Moreover,it ensures the positional stability of the steel-slag interface,confining its position within−3 mm.
基金supported by the National Natural Science Foundation of China(No.52474396 and 52175284)the National Key Research and Development Program of China(Grant No.2022YFB3404201)。
文摘In order to investigate the effect of die wall thickness on morphologies of defect band,a stepped mold with a wall thickness of 5 mm,4 mm,3 mm,2 mm,and 1 mm was designed to carry out high pressure die casting experiments with AlSi10 MgMn alloy.For castings with wall thickness of 2-4 mm,the ratio of the mean defect band width(w)and mean grain size(d)in the defect band(w/d)ranges 7-18,while it increases to 24.47 for the 5 mm-thick casting.This difference is related with the filling speed and the distribution of externally solidified crystals(ESCs).The mold flow analysis indicates that the filling speed decreases from 25.41 m·s^(-1)to 11.07 m·s^(-1)when wall thickness increases from 2 mm to 5 mm.Due to the decreasing filling speed along the wall thickness,ESCs gradually diffuse from the center to the defect band,which keep the shear strength in the defect band at a high-level during filling.Meanwhile,the shear strength generated during the filling also decreases as the shear rate drops.Finally,the defect bands in the 5 mm-thick region become widen and indistinct,and the porosity is as high as 5.25%.
基金financial support of this work by the National Natural Science Foundation of China(Nos.22378332,52003219)the Open Fund of Zhejiang Key Laboratory of Flexible Electronics(No.2022FE008)+1 种基金the Natural Science Foundation of Ningbo(NO.2022J058)Ministry of Industry and Information Technology high quality development project(TC220A04A-206).
文摘Although poly(lactic acid)(PLA)is a good environmentally-friendly bio-degradable polymer which is used to substitute traditional petrochemical-based polymer packaging films,the barrier properties of PLA films are still insufficient for high-barrier packaging applications.In this study,oxygen scavenger hydroxyl-terminated polybutadiene(HTPB)and cobalt salt catalyst were incorporated into the PLA/poly(butylene adipate-co-terephthalate)(PLA/PBAT),followed by melting extrusion and three-layer co-extrusion blown film process to prepare the composite films.The oxygen permeability coefficient of the composite film combined with 6 wt%oxygen scavenger and 0.4 wt%catalyst was decreased significantly from 377.00 cc·mil·m^(-2)·day^(-1)·0.1 MPa^(-1) to 0.98 cc·mil·m^(-2)·day^(-1)·0.1 MPa^(-1),showing a remarkable enhancement of 384.69 times compared with the PLA/PBAT composite film.Meanwhile,the degradation behavior of the composite film was also accelerated,exhibiting a mass loss of nearly 60%of the original mass after seven days of degradation in an alkaline environment,whereas PLA/PBAT composite film only showed a mass loss of 32%.This work has successfully prepared PLA/PBAT composite films with simultaneously improved oxygen barrier property and degradation behavior,which has great potential for high-demanding green chemistry packaging industries,including food,agricultural,and military packaging.
基金financially supported by the National Natural Science Foundation of China(Nos.52274315 and 52374320)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-22-011A1 and FRF-DF22-16)。
文摘During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.
文摘Flip-chip technology is widely used in integrated circuit(IC)packaging.Molded underfill transfer molding is the most common process for these products,as the chip and solder bumps must be protected by the encapsulating material to ensure good reliability.Flow-front merging usually occurs during the molding process,and air is then trapped under the chip,which can form voids in the molded product.The void under the chip may cause stability and reliability problems.However,the flow process is unobservable during the transfer molding process.The engineer can only check for voids in the molded product after the process is complete.Previous studies have used fluid visualization experiments and developed computational fluid dynamics simulation tools to investigate this issue.However,a critical gap remains in establishing a comprehensive three-dimensional model that integrates two-phase flow,accurate venting settings,and fluid surface tension for molded underfill void evaluation—validated by experimental fluid visualization.This study aims to address this gap in the existing literature.In this study,a fluid visualization experiment was designed to simulate the transfer molding process,allowing for the observation of flow-front merging and void formation behaviors.For comparison,a three-dimensional mold flow analysis was also performed.It was found that the numerical simulation of the trapped air compression process under the chip was more accurate when considering the capillary force.The effect of design factors is evaluated in this paper.The results show that the most important factors for void size are fluid viscosity,the gap height under the chip,transfer time,contact angle between the fluid and the contact surfaces,and transfer pressure.Specifically,a smaller gap height beneath the chip aggravates void formation,while lower viscosity,extended transfer time,reduced contact angle,and increased transfer pressure are effective in minimizing void size.The overall results of this study will be useful for product and process design in selecting appropriate solutions for IC packaging,particularly in the development of void-free molded-underfill flip-chip packages.These findings support the optimization of industrial packaging processes in semiconductor manufacturing by guiding material selection and process parameters,ultimately enhancing package reliability and yield.
基金Supported by Research Project on Food Detection Technology Innovation and Standard Integration 2024(YNXM-2024-FW-019).
文摘This paper reviews the research progress on mold detection technologies in milk and dairy products,including rapid test sheet methods,molecular biological detection techniques,metabolomics detection techniques,enzyme-linked immunosorbent assay(ELISA),and microbial rapid photoelectric detection systems,aiming to provide optimal choices for mold detection.
文摘Sorghum is an important cereal crop for smallholder farmers’ food security in many countries in West Africa. However, its production has stagnated due to several factors, such as anthracnose and grain molds. Thus, a study was conducted to identify local germplasms that combine high grain yield and resistance to anthracnose and grain molds under Senegalese environments. A set of 256 genotypes was assessed at Sefa, Sinthiou and Kolda research stations using an incomplete blocks design with two replications. Agro-morphological and phytopathological data were collected. The results revealed a huge phenotypic variation between the genotypes for all traits. The flowering time varied from 43 to 126 days after sowing, while the panicle length varied from 10 to 60 cm. The genotypes were generally more productive at Sinthiou (1653 Kg ha−1) compared to Kolda (164 kg ha−1) research stations. The disease parameters were significantly and positively associated, while the flowering time was strongly and positively associated to grain mold score. The genotypes were classified into three groups with plant height, panicle diameter and length, flowering time and grain mold score as the most discriminating parameters. The genotypes belonging to cluster 3, in addition of being more productive and more resistant to grain mold and anthracnose, have longer panicles. These genotypes present promising prospects for inclusion in breeding programs focused on advancing sorghum yield and disease resistance in Senegal.
文摘A significant portion of losses in the fruit and vegetable sector are caused by the necrotrophic fungus Botrytis cinerea,due to its high prevalence in over 1000 crop species.Identifying a technology capable of exclusively inhibiting its growth and development remains challenging;therefore,various treatments have been proposed to act synergistically in preventing the spread of this pathogen.The objective of this study was to evaluate an ultrasound-assisted treatment combined with chitosan to control the development of B.cinerea.In vitro analyses showed that combining temperature,ultrasound,and chitosan inhibited the fungal radial growth by 80%,reduced sporulation,and decreased germination.Electrolyte leak analysis indicated damage to the B.cinerea cell wall,causing intracellular material to escape into the environment.Scanning and transmission electron microscopy images also revealed severe structural damage,including loss of the cytoplasmic membrane and cell lysis.
文摘The article explains the legal definition of the term‘repair’as used in cosmetic efficacy claims:it refers to the ability to help maintain the normal condition of the applied area.By analysing methods for modelling skin damage,the paper comprehensively summarises the evaluation system for the‘repair’efficacy of cosmetics,introducing existing assessment methods for repair efficacy across different application areas,including facial care products,body care products,foot care products,scalp care products,hair care products,and lip care products.This aims to promote the standardisation and innovative development of repair-type cosmetics.
基金supported by Zhongyuan Special Steel Equipment Manufacturing Co.,Ltd.,China.
文摘A coupled computational model of molten steel within the mold was developed,encompassing electromagnetic fields,fluid flow,heat transfer,shell formation,stress,and strain.The model was verified through comparison with plant measurements,showing reasonable agreement in electromagnetic field distribution,solidification endpoint,and shell thickness.Results indicate that coordinating the submerged entry nozzle(SEN)and mold electromagnetic stirring(M-EMS)effectively regulates the solidification quality of the initial shell.Adjusting M-EMS current frequency changes the impact position of the molten steel jet from the four-port SEN,while increasing current intensity reduces the jet impact intensity.Adjusting the M-EMS parameters can enhance the initial shell uniformity.Furthermore,in areas directly impacted by the steel jet from the four-port SEN,a relationship between brittle temperature range(BTR)width and total mechanical strain was found,and the larger the BTR width,the smaller the corresponding total mechanical strain.The BTR width provides a discriminant method to avoid hot tearing.Appropriate M-EMS parameters are obtained and applied,and the plant trials show a significant improvement in hot tearing near the surface of round blooms.
基金financially supported by the National Natural Science Foundation of China(Nos.52274359 and 52304379)Beijing Natural Science Foundation,China(No.L212021)+4 种基金China National Postdoctoral Program for Innovative Talents(No.BX20220034)China Postdoctoral Science Foundation(No.2022M720403)Fundamental Research Funds for the Central Universities,China(Nos.FRFTP-19005C1Z and 00007718)AECC University Research Cooperation Project,China(No.HFZL2021CXY021)State Key Lab of Advanced Metals and Materials,University of Science and Technology Beijing,China(Nos.2021Z-03 and 2022Z-14)。
文摘Interstitial oxygen(O)contamination remains a substantial challenge for metal injection molding(MIM)of titanium alloys.Herein,this critical problem is successfully addressed by regulating the thermal debinding temperature and incorporating the oxygen scavenger LaB_(6).Results indicate that the surface oxide layer(with a thickness of(13.4±0.5)nm)of Ti_(6)Al4V powder begins to dissolve into the Ti matrix within the temperature range of 663–775℃.O contamination in MIM Ti alloys can be effectively mitigated by lowering the thermal debinding temperature and adding LaB6powder.As a result of reduced dissolved O content,the slips of mixedanddislocations are effectively accelerated,leading to improved ductility.Moreover,grain refinement,along with the in situ formation of Ti B whiskers and second-phase La_(2)O_(3)particles,enhances the strength of the material.The fabricated MIM Ti6Al4V sample exhibits excellent mechanical properties,achieving an ultimate tensile strength of(967±5)MPa,a yield strength of(866±8)MPa,and an elongation of 21.4%±0.7%.These tensile properties represent some of the best results reported in the literature for MIM Ti_(6)Al4V alloys.This study offers valuable insights into the development of high-performance MIM Ti alloys and other metal materials.
基金support from the National Key R&D Program(Grant No.2023YFB3709900)the National Natural Science Foundation of China(Grant No.U22A20171)+1 种基金China Baowu Low Carbon Metallurgy Innovation Foundation(Grant No.BWLCF202315)the High Steel Center(HSC)at North China University of Technology and University of Science and Technology Beijing,China.
文摘Continuous casting of high-titanium steels face significant challenges due to steel-flux reactions,which will cause rapid compositional deviations and impair operational stability.A kinetic model to predict real-time mold flux composition evolution by integrating multicomponent mixed-transport-control theory with thermodynamics computing platform was developed in the current study.The model employed a cyclic time-step algorithm to compute thermodynamic equilibrium in reaction layer,mass transfer flux between reaction and bulk layers,and composition updates in reaction and bulk layers.The accuracy of the model was validated by plant trial data.The effect of casting parameters and initial compositions on the evolution of mold flux composition were investigated.The TiO_(2)accumulation and SiO_(2)consumption in mold flux under varying casting parameters was predicted.It was found that higher casting speeds accelerated compositional equilibrium,while the increase of mold flux consumption rates reduced TiO_(2)accumulation.The increase of pool depth resulted in slower consumption and accumulation rates of components like SiO_(2)and TiO_(2),prolonging the time to reach equilibrium.Additionally,the CaO-Al_(2)O_(3)-based flux suppressed the Ti-SiO_(2)reaction for the high-titanium steel continuous casting.However,the CaO-Al_(2)O_(3)-based flux should limited contents of Na_(2)O,MnO,and FeO to prevent additional TiO_(2)accumulation due to Ti-Na_(2)O,Ti-MnO,and Ti-FeO reactions.The model provided a reliable tool for understanding and optimizing the continuous casting process of high-titanium steels.
