A composite anti-disturbance predictive control strategy employing a Multi-dimensional Taylor Network(MTN)is presented for unmanned systems subject to time-delay and multi-source disturbances.First,the multi-source di...A composite anti-disturbance predictive control strategy employing a Multi-dimensional Taylor Network(MTN)is presented for unmanned systems subject to time-delay and multi-source disturbances.First,the multi-source disturbances are addressed according to their specific characteristics as follows:(A)an MTN data-driven model,which is used for uncertainty description,is designed accompanied with the mechanism model to represent the unmanned systems;(B)an adaptive MTN filter is used to remove the influence of the internal disturbance;(C)an MTN disturbance observer is constructed to estimate and compensate for the influence of the external disturbance;(D)the Extended Kalman Filter(EKF)algorithm is utilized as the learning mechanism for MTNs.Second,to address the time-delay effect,a recursiveτstep-ahead MTN predictive model is designed utilizing recursive technology,aiming to mitigate the impact of time-delay,and the EKF algorithm is employed as its learning mechanism.Then,the MTN predictive control law is designed based on the quadratic performance index.By implementing the proposed composite controller to unmanned systems,simultaneous feedforward compensation and feedback suppression to the multi-source disturbances are conducted.Finally,the convergence of the MTN and the stability of the closed-loop system are established utilizing the Lyapunov theorem.Two exemplary applications of unmanned systems involving unmanned vehicle and rigid spacecraft are presented to validate the effectiveness of the proposed approach.展开更多
The ancient tacit knowledge behind the logic system permeated the culture and promoted numerous impactful inventions throughout the history. Traditional Chinese medicine with its effectiveness should also have stemmed...The ancient tacit knowledge behind the logic system permeated the culture and promoted numerous impactful inventions throughout the history. Traditional Chinese medicine with its effectiveness should also have stemmed out from such logic system. This article aims to rearticulate the underlying lucid multi-dimensional logic system, which faded in obscurity only because of time-out loss of the mid-right concept. Retracing this past tacit but important concept could uncover a multi-dimensional system over a point relating to all matters while capturing the central core of the matter. The seemingly unmanageable multidimensional logic was strengthened by verification processes which affirmed its further extensions, and made up the language of the people, the concepts of yin-yang(阴阳), and the development of extensions of Ba Gua(八卦) derivatives, which furthered the interpretation of the space-time properties and Chinese medicine.展开更多
Stress accumulation is a key factor leading to sodium storage performance deterioration for NiSe_(2)-based anodes.Therefore,inhibiting the concentrated local stress during the sodiataion/desodiation process is crucial...Stress accumulation is a key factor leading to sodium storage performance deterioration for NiSe_(2)-based anodes.Therefore,inhibiting the concentrated local stress during the sodiataion/desodiation process is crucial for acquiring stable NiSe2-based materials for sodium-ion batteries(SIBs),Herein,a stress dissipation strategy driven by architecture engineering is proposed,which can achieve ultrafast and ultralong sodium storage properties.Different from the conventional sphere-like or rod-like architecture,the three-dimensional(3D)flower-like NiSe_(2)@C composite is delicately designed and assembled with onedimensional nanorods and carbon framework.More importantly,the fundamental mechanism of improved structure stability is unveiled by simulations and experimental results simultaneously.It demonstrates that this designed multidimensional flower-like architecture with dispersed nanorods can balance the structural mismatch,avoid concentrated local strain,and relax the internal stress,mainly induced by the unavoidable volume variation during the repeated conversion processes.Moreover,it can provide more Na^(+)-storage sites and multi-directional migration pathways,leading to a fast Na^(+)-migration channel with boosted reaction kinetic.As expected,it delivers superior rate performance(441 mA h g^(-1)at 5.0 A g^(-1))and long cycling stability(563 mA h g^(-1)at 1.0 A g^(-1)over 1000 cycles)for SIBs.This work provides useful insights for designing high-performance conversion-based anode materials for SIBs.展开更多
This paper explores whole-process engineering consulting,including its application models in public buildings and elderly-friendly projects,such as service integration and whole lifecycle management.It also addresses ...This paper explores whole-process engineering consulting,including its application models in public buildings and elderly-friendly projects,such as service integration and whole lifecycle management.It also addresses the construction of multi-dimensional collaborative theoretical models,public space streamline organization,and other aspects,emphasizing the importance of multi-dimensional collaboration.Additionally,it highlights the role of talent cultivation and digital transformation in enhancing project efficiency.展开更多
The multi-dimensional interactive teaching model significantly enhances the effectiveness of college English instruction by emphasizing dynamic engagement between teachers and students,as well as among students themse...The multi-dimensional interactive teaching model significantly enhances the effectiveness of college English instruction by emphasizing dynamic engagement between teachers and students,as well as among students themselves.This paper explores practical strategies for implementing this model,focusing on four key aspects:deepening teachers’understanding of the model through continuous learning,innovating interactive methods such as questioning techniques and practical activities,leveraging modern technology to integrate resources and track learning progress,and establishing a communication platform that centers on student participation.By adopting these approaches,the model fosters a student-centered classroom environment,improves comprehensive English application skills,and optimizes overall teaching quality.展开更多
During the critical transformation period of landscape architecture major after the adjustment of disciplinary structure and the changes in market demand,private colleges and universities,as important places for culti...During the critical transformation period of landscape architecture major after the adjustment of disciplinary structure and the changes in market demand,private colleges and universities,as important places for cultivating local talents,have pain points such as uneven quality of teachers and students and weak innovation and practice.The practice system with“multi-dimensional Integration”integrates four dimensions:interdisciplinary integration,spatial and temporal intersection,historical inheritance,and behavioral activity,deepens the disciplinary connotation,and integrates the three elements of nature,humanity,and technology,aiming to provide a new path for private colleges and universities to cultivate application-oriented and compound talents with innovative capabilities.In terms of optimizing talent cultivation and adapting to industry changes,this system provides thinking and reference for landscape architecture major,helping the major reshape its core competitiveness and promoting educational innovation and industry development.展开更多
This paper proposes a reliability evaluation model for a multi-dimensional network system,which has potential to be applied to the internet of things or other practical networks.A multi-dimensional network system with...This paper proposes a reliability evaluation model for a multi-dimensional network system,which has potential to be applied to the internet of things or other practical networks.A multi-dimensional network system with one source element and multiple sink elements is considered first.Each element can con-nect with other elements within a stochastic connection ranges.The system is regarded as successful as long as the source ele-ment remains connected with all sink elements.An importance measure is proposed to evaluate the performance of non-source elements.Furthermore,to calculate the system reliability and the element importance measure,a multi-valued decision diagram based approach is structured and its complexity is analyzed.Finally,a numerical example about the signal transfer station system is illustrated to analyze the system reliability and the ele-ment importance measure.展开更多
Constructing multi-dimensional hydrogen bond(H-bond)regulated single-molecule systems with multiemission remains a challenge.Herein,we report the design of a new excited-state intramolecular proton transfer(ESIPT)feat...Constructing multi-dimensional hydrogen bond(H-bond)regulated single-molecule systems with multiemission remains a challenge.Herein,we report the design of a new excited-state intramolecular proton transfer(ESIPT)featured chromophore(HBT-DPI)that shows flexible emission tunability via the multidimensional regulation of intra-and intermolecular H-bonds.The feature of switchable intramolecular Hbonds is induced via incorporating several hydrogen bond acceptors and donors into one single HBT-DPI molecule,allowing the“turn on/off”of ESIPT process by forming isomers with distinct intramolecular Hbonds configurations.In response to different external H-bonding environments,the obtained four types of crystal/cocrystals vary in the contents of isomers and the molecular packing modes,which are mainly guided by the intermolecular H-bonds,exhibiting non-emissive features or emissions ranging from green to orange.Utilizing the feature of intermolecular H-bond guided molecular packing,we demonstrate the utility of this fluorescent material for visualizing hydrophobic/hydrophilic areas on large-scale heterogeneous surfaces of modified poly(1,1-difluoroethylene)(PVDF)membranes and quantitatively estimating the surface hydrophobicity,providing a new approach for hydrophobicity/hydrophilicity monitoring and measurement.Overall,this study represents a new design strategy for constructing multi-dimensional hydrogen bond regulated ESIPT-based fluorescent materials that enable multiple emissions and unique applications.展开更多
To break the limitations of the multi-dimensional(M-D)vibration isolation(VI)platforms with the Stewart-Gough design,such as strongly coupling motions,excessive friction in connections,heavy weight,and limited workspa...To break the limitations of the multi-dimensional(M-D)vibration isolation(VI)platforms with the Stewart-Gough design,such as strongly coupling motions,excessive friction in connections,heavy weight,and limited workspace,this study processes a novel platform integrated by a stiffness-adjustable origami spring sub-structure and a parallel mechanism.The origami-based stiffness-adjustable spring realizes low-frequency VI,and the parallel mechanism symmetry design realizes motions decoupling.In the origami-based sub-leg,the parallel-stack-assembly(PSA)design mechanism with two Miura origami configurations is proposed to generate a symmetrical negative stiffness property.Paired with a linear positive stiffness spring,the origami-based sub-leg has wide-amplitude-high-static-low-dynamic stiffness(WA-HSLDS)characteristics in one direction.Then,with construction of the parallel mechanism connected with origami-based sub-legs,an M-D VI platform is achieved,whose motions in the vertical direction and yaw direction are decoupled with the motions in the other directions.Based on the dynamic model and incremental harmonic balance(IHB)with the arc-length continuation method,appropriate structural parameters in the parallel mechanism part are figured out,and the accurate transmissibility in different directions is defined,which gives the parametric influencing investigations for realization of low-frequency VI performances.Finally,experiments are conducted to validate the accuracy and feasibility of the theoretical methods,and to demonstrate the performance of M-D low-frequency isolation with load-carrying capacity of the proposed VI platform.The integration of the origami into the parallel mechanism results in a compact,efficient,and flexible platform with nonlinear adjustability,offering new possibilities for lightweight M-D VI,and developing the practical applications in high-precision platforms in ocean and aerospace environments.展开更多
The study constructed a multi-dimensional feedback mode integrating teacher feedback, peer feedback and network feedback, and applied it in the teaching of College English Writing. After 16 weeks of teaching, the stud...The study constructed a multi-dimensional feedback mode integrating teacher feedback, peer feedback and network feedback, and applied it in the teaching of College English Writing. After 16 weeks of teaching, the students in the multi-dimen-sional feedback class had significantly better overall writing scores than those in the teacher-feedback class. In terms of individual scores, multi-dimensional feedback played a better role in improving vocabulary and grammar than the class using teacher feed-back. However, there were no significant differences in the responses of writing tasks, coherence and cohesion. The study showed that most students were satisfied with the mode, believing that it was helpful to relieve writing anxiety, stimulate writing interest and improve their writing level.展开更多
主要乳胶蛋白(major latex protein,MLP)是Bet v 1超家族成员,参与植物的各种应激反应。本研究对桑树主要乳胶蛋白基因MaMLP423的启动子pMaMLP423进行了生物信息学分析和克隆表达分析。结果显示pMaMLP423具有启动子必需的TATA-box和CAAT...主要乳胶蛋白(major latex protein,MLP)是Bet v 1超家族成员,参与植物的各种应激反应。本研究对桑树主要乳胶蛋白基因MaMLP423的启动子pMaMLP423进行了生物信息学分析和克隆表达分析。结果显示pMaMLP423具有启动子必需的TATA-box和CAAT-box等基本顺式作用元件,还有参与光响应(Box 4、TCT-motif、GA-motif等)、脱落酸反应(ABRE、AAGAA-motif)、乙烯响应(ERE)、干旱诱导(MYB、MBS等)、创伤响应(WUN-motif)等顺式作用元件。构建植物表达载体pMaMLP423及缺失部分序列的pMaMLP423ΔS1和pMaMLP423ΔS2,转化烟草瞬时表达,qPCR和组织化学染色检测显示,三个启动子均能驱动下游GUS基因的表达,但缺失S1和S2启动子的活性降低。外源激素脱落酸和乙烯利能显著诱导MaMLP4232基因的表达。本研究为深入了解MaMLP423的功能和作用提供了参考。展开更多
Recently,multilevel structural carbon aerogels are deemed as attractive candidates for microwave absorbing materials.Nevertheless,excessive stack and agglomeration for low-dimension carbon nanomaterials inducing imped...Recently,multilevel structural carbon aerogels are deemed as attractive candidates for microwave absorbing materials.Nevertheless,excessive stack and agglomeration for low-dimension carbon nanomaterials inducing impedance mismatch are significant challenges.Herein,the delicate“3D helix-2D sheet-1D fiber-0D dot”hierarchical aerogels have been successfully synthesized,for the first time,by sequential processes of hydrothermal self-assembly and in-situ chemical vapor deposition method.Particularly,the graphene sheets are uniformly intercalated by 3D helical carbon nanocoils,which give a feasible solution to the mentioned problem and endows the as-obtained aerogel with abundant porous structures and better dielectric properties.Moreover,by adjusting the content of 0D core-shell structured particles and the parameters for growth of the 1D carbon nanofibers,tunable electromagnetic properties and excellent impedance matching are achieved,which plays a vital role in the microwave absorption performance.As expected,the optimized aerogels harvest excellent performance,including broad effective bandwidth and strong reflection loss at low filling ratio and thin thickness.This work gives valuable guidance and inspiration for the design of hierarchical materials comprised of dimensional gradient structures,which holds great application potential for electromagnetic wave attenuation.展开更多
Fragility analysis for highway bridges has become increasingly important in the risk assessment of highway transportation networks exposed to seismic hazards. This study introduces a methodology to calculate fragility...Fragility analysis for highway bridges has become increasingly important in the risk assessment of highway transportation networks exposed to seismic hazards. This study introduces a methodology to calculate fragility that considers multi-dimensional performance limit state parameters and makes a first attempt to develop fragility curves for a multi-span continuous (MSC) concrete girder bridge considering two performance limit state parameters: column ductility and transverse deformation in the abutments. The main purpose of this paper is to show that the performance limit states, which are compared with the seismic response parameters in the calculation of fragility, should be properly modeled as randomly interdependent variables instead of deterministic quantities. The sensitivity of fragility curves is also investigated when the dependency between the limit states is different. The results indicate that the proposed method can be used to describe the vulnerable behavior of bridges which are sensitive to multiple response parameters and that the fragility information generated by this method will be more reliable and likely to be implemented into transportation network loss estimation.展开更多
Because the hydraulic directional valve usually works in a bad working environment and is disturbed by multi-factor noise,the traditional single sensor monitoring technology is difficult to use for an accurate diagnos...Because the hydraulic directional valve usually works in a bad working environment and is disturbed by multi-factor noise,the traditional single sensor monitoring technology is difficult to use for an accurate diagnosis of it.Therefore,a fault diagnosis method based on multi-sensor information fusion is proposed in this paper to reduce the inaccuracy and uncertainty of traditional single sensor information diagnosis technology and to realize accurate monitoring for the location or diagnosis of early faults in such valves in noisy environments.Firstly,the statistical features of signals collected by the multi-sensor are extracted and the depth features are obtained by a convolutional neural network(CNN)to form a complete and stable multi-dimensional feature set.Secondly,to obtain a weighted multi-dimensional feature set,the multi-dimensional feature sets of similar sensors are combined,and the entropy weight method is used to weight these features to reduce the interference of insensitive features.Finally,the attention mechanism is introduced to improve the dual-channel CNN,which is used to adaptively fuse the weighted multi-dimensional feature sets of heterogeneous sensors,to flexibly select heterogeneous sensor information so as to achieve an accurate diagnosis.Experimental results show that the weighted multi-dimensional feature set obtained by the proposed method has a high fault-representation ability and low information redundancy.It can diagnose simultaneously internal wear faults of the hydraulic directional valve and electromagnetic faults of actuators that are difficult to diagnose by traditional methods.This proposed method can achieve high fault-diagnosis accuracy under severe working conditions.展开更多
The simulation of hypersonic flows with fully unstructured(tetrahedral)grids has severe problems with respect to the prediction of stagnation region heating,due to the random face orientation without alignment to the ...The simulation of hypersonic flows with fully unstructured(tetrahedral)grids has severe problems with respect to the prediction of stagnation region heating,due to the random face orientation without alignment to the bow shock.To improve the accuracy of aero-heating predictions,three multi-dimensional approaches on unstructured grids are coupled in our Reynolds-averaged Navier-Stokes(RANS)solver,including multi-dimensional upwind flux reconstruction(MUP),multi-dimensional limiter(MLP-u2)and multi-dimensional gradient reconstruction(MLR).The coupled multi-dimensional RANS solver is validated by several typical verification and validation(V&V)cases,including hypersonic flows over a cylinder,a blunt biconic,and a double-ellipsoid,with commonly used prism/tetrahedral hybrid grids.Finally,the coupled multi-dimensional solver is applied to simulating the heat flux distribution over a 3D engineering configuration,i.e.a Hermes-like space shuttle model.The obtained numerical results are compared with experimental data.The predicted results demonstrate that the coupled multi-dimensional approach has a good prediction capability on aerodynamic heating over a wide range of complex engineering configurations.展开更多
基金co-supported by the National Key R&D Program of China(No.2023YFB4704400)the Zhejiang Provincial Natural Science Foundation of China(No.LQ24F030012)the National Natural Science Foundation of China General Project(No.62373033)。
文摘A composite anti-disturbance predictive control strategy employing a Multi-dimensional Taylor Network(MTN)is presented for unmanned systems subject to time-delay and multi-source disturbances.First,the multi-source disturbances are addressed according to their specific characteristics as follows:(A)an MTN data-driven model,which is used for uncertainty description,is designed accompanied with the mechanism model to represent the unmanned systems;(B)an adaptive MTN filter is used to remove the influence of the internal disturbance;(C)an MTN disturbance observer is constructed to estimate and compensate for the influence of the external disturbance;(D)the Extended Kalman Filter(EKF)algorithm is utilized as the learning mechanism for MTNs.Second,to address the time-delay effect,a recursiveτstep-ahead MTN predictive model is designed utilizing recursive technology,aiming to mitigate the impact of time-delay,and the EKF algorithm is employed as its learning mechanism.Then,the MTN predictive control law is designed based on the quadratic performance index.By implementing the proposed composite controller to unmanned systems,simultaneous feedforward compensation and feedback suppression to the multi-source disturbances are conducted.Finally,the convergence of the MTN and the stability of the closed-loop system are established utilizing the Lyapunov theorem.Two exemplary applications of unmanned systems involving unmanned vehicle and rigid spacecraft are presented to validate the effectiveness of the proposed approach.
文摘The ancient tacit knowledge behind the logic system permeated the culture and promoted numerous impactful inventions throughout the history. Traditional Chinese medicine with its effectiveness should also have stemmed out from such logic system. This article aims to rearticulate the underlying lucid multi-dimensional logic system, which faded in obscurity only because of time-out loss of the mid-right concept. Retracing this past tacit but important concept could uncover a multi-dimensional system over a point relating to all matters while capturing the central core of the matter. The seemingly unmanageable multidimensional logic was strengthened by verification processes which affirmed its further extensions, and made up the language of the people, the concepts of yin-yang(阴阳), and the development of extensions of Ba Gua(八卦) derivatives, which furthered the interpretation of the space-time properties and Chinese medicine.
基金the financial support from the Guangxi Natural Science Foundation(grant no.2021GXNSFDA075012,2023GXNSFGA026002)National Natural Science Foundation of China(52104298,22075073,52362027,52462029)Fundamental Research Funds for the Central Universities(531107051077).
文摘Stress accumulation is a key factor leading to sodium storage performance deterioration for NiSe_(2)-based anodes.Therefore,inhibiting the concentrated local stress during the sodiataion/desodiation process is crucial for acquiring stable NiSe2-based materials for sodium-ion batteries(SIBs),Herein,a stress dissipation strategy driven by architecture engineering is proposed,which can achieve ultrafast and ultralong sodium storage properties.Different from the conventional sphere-like or rod-like architecture,the three-dimensional(3D)flower-like NiSe_(2)@C composite is delicately designed and assembled with onedimensional nanorods and carbon framework.More importantly,the fundamental mechanism of improved structure stability is unveiled by simulations and experimental results simultaneously.It demonstrates that this designed multidimensional flower-like architecture with dispersed nanorods can balance the structural mismatch,avoid concentrated local strain,and relax the internal stress,mainly induced by the unavoidable volume variation during the repeated conversion processes.Moreover,it can provide more Na^(+)-storage sites and multi-directional migration pathways,leading to a fast Na^(+)-migration channel with boosted reaction kinetic.As expected,it delivers superior rate performance(441 mA h g^(-1)at 5.0 A g^(-1))and long cycling stability(563 mA h g^(-1)at 1.0 A g^(-1)over 1000 cycles)for SIBs.This work provides useful insights for designing high-performance conversion-based anode materials for SIBs.
文摘This paper explores whole-process engineering consulting,including its application models in public buildings and elderly-friendly projects,such as service integration and whole lifecycle management.It also addresses the construction of multi-dimensional collaborative theoretical models,public space streamline organization,and other aspects,emphasizing the importance of multi-dimensional collaboration.Additionally,it highlights the role of talent cultivation and digital transformation in enhancing project efficiency.
文摘The multi-dimensional interactive teaching model significantly enhances the effectiveness of college English instruction by emphasizing dynamic engagement between teachers and students,as well as among students themselves.This paper explores practical strategies for implementing this model,focusing on four key aspects:deepening teachers’understanding of the model through continuous learning,innovating interactive methods such as questioning techniques and practical activities,leveraging modern technology to integrate resources and track learning progress,and establishing a communication platform that centers on student participation.By adopting these approaches,the model fosters a student-centered classroom environment,improves comprehensive English application skills,and optimizes overall teaching quality.
基金Sponsored by the Quality Engineering Project of Education Department of Anhui Province(2022jyxm671)Research Team Project of Anhui Xinhua University(kytd202202)+1 种基金Key Project of Scientific Research(Natural Science)of Higher Education Institutions in Anhui Province(2022AH051861)Teaching Reform Research and Practice Quality Engineering Project of Anhui Xinhua University(2024jy035).
文摘During the critical transformation period of landscape architecture major after the adjustment of disciplinary structure and the changes in market demand,private colleges and universities,as important places for cultivating local talents,have pain points such as uneven quality of teachers and students and weak innovation and practice.The practice system with“multi-dimensional Integration”integrates four dimensions:interdisciplinary integration,spatial and temporal intersection,historical inheritance,and behavioral activity,deepens the disciplinary connotation,and integrates the three elements of nature,humanity,and technology,aiming to provide a new path for private colleges and universities to cultivate application-oriented and compound talents with innovative capabilities.In terms of optimizing talent cultivation and adapting to industry changes,this system provides thinking and reference for landscape architecture major,helping the major reshape its core competitiveness and promoting educational innovation and industry development.
基金supported by the National Natural Science Foundation of China(72101025,72271049),the Interdisciplinary Research Project for Young Teachers of USTB(Fundamental Research Funds for the Central Universities,FRF-IDRY-24-024)the Hebei Natural Science Foundation(F2023501011)+1 种基金the Fundamental Research Funds for the Central Universities(FRF-TP-20-073A1)the R&D Program of Beijing Municipal Education Commission(KM202411232015).
文摘This paper proposes a reliability evaluation model for a multi-dimensional network system,which has potential to be applied to the internet of things or other practical networks.A multi-dimensional network system with one source element and multiple sink elements is considered first.Each element can con-nect with other elements within a stochastic connection ranges.The system is regarded as successful as long as the source ele-ment remains connected with all sink elements.An importance measure is proposed to evaluate the performance of non-source elements.Furthermore,to calculate the system reliability and the element importance measure,a multi-valued decision diagram based approach is structured and its complexity is analyzed.Finally,a numerical example about the signal transfer station system is illustrated to analyze the system reliability and the ele-ment importance measure.
基金supported by the National Key R&D Program of China(No.2021YFC2103600)the National Natural Science Foundation of China(Nos.21878156,21978131,22275085,and 22278224)+2 种基金the Natural Science Foundation of Jiangsu Province(Nos.BK20200089 and BK20200691)the Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the State Key Laboratory of Materials-Oriented Chemical Engineering(No.KL21-08).
文摘Constructing multi-dimensional hydrogen bond(H-bond)regulated single-molecule systems with multiemission remains a challenge.Herein,we report the design of a new excited-state intramolecular proton transfer(ESIPT)featured chromophore(HBT-DPI)that shows flexible emission tunability via the multidimensional regulation of intra-and intermolecular H-bonds.The feature of switchable intramolecular Hbonds is induced via incorporating several hydrogen bond acceptors and donors into one single HBT-DPI molecule,allowing the“turn on/off”of ESIPT process by forming isomers with distinct intramolecular Hbonds configurations.In response to different external H-bonding environments,the obtained four types of crystal/cocrystals vary in the contents of isomers and the molecular packing modes,which are mainly guided by the intermolecular H-bonds,exhibiting non-emissive features or emissions ranging from green to orange.Utilizing the feature of intermolecular H-bond guided molecular packing,we demonstrate the utility of this fluorescent material for visualizing hydrophobic/hydrophilic areas on large-scale heterogeneous surfaces of modified poly(1,1-difluoroethylene)(PVDF)membranes and quantitatively estimating the surface hydrophobicity,providing a new approach for hydrophobicity/hydrophilicity monitoring and measurement.Overall,this study represents a new design strategy for constructing multi-dimensional hydrogen bond regulated ESIPT-based fluorescent materials that enable multiple emissions and unique applications.
基金Project supported by the National Natural Science Foundation of China(Nos.U2441202,12372043,and 12372022)the Fundamental Research Funds for Central Universities。
文摘To break the limitations of the multi-dimensional(M-D)vibration isolation(VI)platforms with the Stewart-Gough design,such as strongly coupling motions,excessive friction in connections,heavy weight,and limited workspace,this study processes a novel platform integrated by a stiffness-adjustable origami spring sub-structure and a parallel mechanism.The origami-based stiffness-adjustable spring realizes low-frequency VI,and the parallel mechanism symmetry design realizes motions decoupling.In the origami-based sub-leg,the parallel-stack-assembly(PSA)design mechanism with two Miura origami configurations is proposed to generate a symmetrical negative stiffness property.Paired with a linear positive stiffness spring,the origami-based sub-leg has wide-amplitude-high-static-low-dynamic stiffness(WA-HSLDS)characteristics in one direction.Then,with construction of the parallel mechanism connected with origami-based sub-legs,an M-D VI platform is achieved,whose motions in the vertical direction and yaw direction are decoupled with the motions in the other directions.Based on the dynamic model and incremental harmonic balance(IHB)with the arc-length continuation method,appropriate structural parameters in the parallel mechanism part are figured out,and the accurate transmissibility in different directions is defined,which gives the parametric influencing investigations for realization of low-frequency VI performances.Finally,experiments are conducted to validate the accuracy and feasibility of the theoretical methods,and to demonstrate the performance of M-D low-frequency isolation with load-carrying capacity of the proposed VI platform.The integration of the origami into the parallel mechanism results in a compact,efficient,and flexible platform with nonlinear adjustability,offering new possibilities for lightweight M-D VI,and developing the practical applications in high-precision platforms in ocean and aerospace environments.
文摘The study constructed a multi-dimensional feedback mode integrating teacher feedback, peer feedback and network feedback, and applied it in the teaching of College English Writing. After 16 weeks of teaching, the students in the multi-dimen-sional feedback class had significantly better overall writing scores than those in the teacher-feedback class. In terms of individual scores, multi-dimensional feedback played a better role in improving vocabulary and grammar than the class using teacher feed-back. However, there were no significant differences in the responses of writing tasks, coherence and cohesion. The study showed that most students were satisfied with the mode, believing that it was helpful to relieve writing anxiety, stimulate writing interest and improve their writing level.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51972039,51803018,and 51661145025)LiaoNing Revitalization Talents Program(No.XLYC1902122).
文摘Recently,multilevel structural carbon aerogels are deemed as attractive candidates for microwave absorbing materials.Nevertheless,excessive stack and agglomeration for low-dimension carbon nanomaterials inducing impedance mismatch are significant challenges.Herein,the delicate“3D helix-2D sheet-1D fiber-0D dot”hierarchical aerogels have been successfully synthesized,for the first time,by sequential processes of hydrothermal self-assembly and in-situ chemical vapor deposition method.Particularly,the graphene sheets are uniformly intercalated by 3D helical carbon nanocoils,which give a feasible solution to the mentioned problem and endows the as-obtained aerogel with abundant porous structures and better dielectric properties.Moreover,by adjusting the content of 0D core-shell structured particles and the parameters for growth of the 1D carbon nanofibers,tunable electromagnetic properties and excellent impedance matching are achieved,which plays a vital role in the microwave absorption performance.As expected,the optimized aerogels harvest excellent performance,including broad effective bandwidth and strong reflection loss at low filling ratio and thin thickness.This work gives valuable guidance and inspiration for the design of hierarchical materials comprised of dimensional gradient structures,which holds great application potential for electromagnetic wave attenuation.
基金National Natural Science Foundation of China Under Award Number 50878184National High Technology Research and Development Program (863 Program) of China Under Grant No. 2006AA04Z437Graduate Starting Seed Fund of Northwestern Polytechnical University Under the Grant No. Z2012059
文摘Fragility analysis for highway bridges has become increasingly important in the risk assessment of highway transportation networks exposed to seismic hazards. This study introduces a methodology to calculate fragility that considers multi-dimensional performance limit state parameters and makes a first attempt to develop fragility curves for a multi-span continuous (MSC) concrete girder bridge considering two performance limit state parameters: column ductility and transverse deformation in the abutments. The main purpose of this paper is to show that the performance limit states, which are compared with the seismic response parameters in the calculation of fragility, should be properly modeled as randomly interdependent variables instead of deterministic quantities. The sensitivity of fragility curves is also investigated when the dependency between the limit states is different. The results indicate that the proposed method can be used to describe the vulnerable behavior of bridges which are sensitive to multiple response parameters and that the fragility information generated by this method will be more reliable and likely to be implemented into transportation network loss estimation.
基金supported by the National Natural Science Foundation of China(Nos.51805376 and U1709208)the Zhejiang Provincial Natural Science Foundation of China(Nos.LY20E050028 and LD21E050001)。
文摘Because the hydraulic directional valve usually works in a bad working environment and is disturbed by multi-factor noise,the traditional single sensor monitoring technology is difficult to use for an accurate diagnosis of it.Therefore,a fault diagnosis method based on multi-sensor information fusion is proposed in this paper to reduce the inaccuracy and uncertainty of traditional single sensor information diagnosis technology and to realize accurate monitoring for the location or diagnosis of early faults in such valves in noisy environments.Firstly,the statistical features of signals collected by the multi-sensor are extracted and the depth features are obtained by a convolutional neural network(CNN)to form a complete and stable multi-dimensional feature set.Secondly,to obtain a weighted multi-dimensional feature set,the multi-dimensional feature sets of similar sensors are combined,and the entropy weight method is used to weight these features to reduce the interference of insensitive features.Finally,the attention mechanism is introduced to improve the dual-channel CNN,which is used to adaptively fuse the weighted multi-dimensional feature sets of heterogeneous sensors,to flexibly select heterogeneous sensor information so as to achieve an accurate diagnosis.Experimental results show that the weighted multi-dimensional feature set obtained by the proposed method has a high fault-representation ability and low information redundancy.It can diagnose simultaneously internal wear faults of the hydraulic directional valve and electromagnetic faults of actuators that are difficult to diagnose by traditional methods.This proposed method can achieve high fault-diagnosis accuracy under severe working conditions.
基金the National Key Research&Development Program of China(2016YFB020071)the National Natural Science Foundation of China(Grants 11532016 and 11702315).
文摘The simulation of hypersonic flows with fully unstructured(tetrahedral)grids has severe problems with respect to the prediction of stagnation region heating,due to the random face orientation without alignment to the bow shock.To improve the accuracy of aero-heating predictions,three multi-dimensional approaches on unstructured grids are coupled in our Reynolds-averaged Navier-Stokes(RANS)solver,including multi-dimensional upwind flux reconstruction(MUP),multi-dimensional limiter(MLP-u2)and multi-dimensional gradient reconstruction(MLR).The coupled multi-dimensional RANS solver is validated by several typical verification and validation(V&V)cases,including hypersonic flows over a cylinder,a blunt biconic,and a double-ellipsoid,with commonly used prism/tetrahedral hybrid grids.Finally,the coupled multi-dimensional solver is applied to simulating the heat flux distribution over a 3D engineering configuration,i.e.a Hermes-like space shuttle model.The obtained numerical results are compared with experimental data.The predicted results demonstrate that the coupled multi-dimensional approach has a good prediction capability on aerodynamic heating over a wide range of complex engineering configurations.
