In this research,laminar flow and heat transfer of two-phase water/Ag nanofluid with 0–6%volume fraction of nanoparticles at Re=150–700 in a curved geometry are simulated using finite volume method.Studied geometry ...In this research,laminar flow and heat transfer of two-phase water/Ag nanofluid with 0–6%volume fraction of nanoparticles at Re=150–700 in a curved geometry are simulated using finite volume method.Studied geometry is an elliptical curved minichannel with curvature angle of 180°.Forced and natural flow of two-phase nanofluid is simulated at Gr=15000,35000 and 75000.For estimation of nanofluid flow behavior,two-phase mixture method is used.The second-order discretization and SIMPLEC algorithm are used for solving governing equations.The results indicate that the increase of volume fraction of nanoparticles leads to the enhancement of the temperature of central line of flow.The increase of Grashof number(Gr^75000)has a great effect on reduction of dimensionless temperature in central line of flow.Creation of thermal boundary layer at Re=500 and after the angle of 30°becomes significant.In low Grashof numbers(Gr^15000),due to the great effects of temperature gradients close to wall,these regions have significant entropy generation.展开更多
In the present paper, in order to clarity the effects of non-Newtonian liquid properties on the flow, similar experiments have been conducted for that of 0.4 wt% polyacrylamide (PAM) aqueous solutions as the working l...In the present paper, in order to clarity the effects of non-Newtonian liquid properties on the flow, similar experiments have been conducted for that of 0.4 wt% polyacrylamide (PAM) aqueous solutions as the working liquid, and air as the working gas. Liquid single-phase and air-liquid two-phase flow experiments were conducted at room temperature using the horizontal rectangular mini-channel with a sudden expansion. The cross-sectional dimensions of the narrow channel upstream from the sudden expansion were 2.79 mm, 3.09 mm and 2.94 mm in the height (H), the width (W) and the hydraulic diameter (DH), while those for the wide channel were 2.95 mm, 5.98 mm and 3.95 mm. The pressure distributions in the channels upstream and downstream from the expansion were measured with calibrated pressure transducer to determine the pressure change due to the expansion. The flow pattern, the bubble velocity, the bubble length, and the void fraction were measured with a high-speed video camera. The flow pattern map is drawn from the observed flow pattern, i.e., bubble flow, slug flow and annular flow in both the wide and the narrow channels. The bubble length data were compared with the calculation by the scaling law proposed by Kanezaki et al. and Kawahara et al. The pressure change data at the expansion were compared with our previous data together with several correlations in literature. Results of such experiment and comparisons are reported in the present paper.展开更多
Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer ...Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer process.In this work,the Discrete Phase Model(DPM) based on the Euler-Lagrangian method is used to numerically investigate the convective heat transfer characteristics of MEPCMS flowing through a rectangular minichannel with constant heat flux.The results show that particles of MEPCMS are mainly subjected to drag force during the flow.Even so,they can migrate from the high-temperature region to the low-temperature region driven by the thermophoretic force,affecting the particle distribution and phase change process.Moreover,the Nux of the MEPCMS fluctuates due to particle phase change with varying specific heat capacities.Specifically,the value increases first,then decreases,and eventually increases again until it approaches the fully developed value of the pure base fluid as the particles gradually melt.Furthermore,the heat transfer performance of the MEPCMS is influenced by the combination of fluid inlet temperature fluid inlet velocity(v),and mass concentration(c_(m)) of MEPCM particles.The result shows that the maximum reduction of the maximum bottom wall temperature difference(ΔT_(w)) is 23.98% at T_(in)=293.15 K,v=0.15 m·s^(-1),c_(m)=10%.展开更多
An experimental investigation was conducted on the laminar flow frictional characteristics of suspensions with microencapsulated phase change material (MEPCM) in water flowing through rectangular copper minichannels. ...An experimental investigation was conducted on the laminar flow frictional characteristics of suspensions with microencapsulated phase change material (MEPCM) in water flowing through rectangular copper minichannels. The MEPCM was provided at an average particle size of 4.97 μm, and was mixed with distilled water to form suspen- sions with various mass concentrations ranging from 0 to 20%. The experiment was per- formed to explore the effect of MEPCM mass concentration on friction factor and pressure drop in the minichannels. The Reynolds number ranged from 200 to 2000 to provide laminar and transitional flows. It was found that the experimental data for the suspensions with 0 and 5% concentration agree well with the existing theoretical data for an incom- pressible, fully developed, laminar Newtonian flow. For the suspensions with mass con- centrations higher than 10%, there is an obvious increase in friction factor and pressure drop in comparison with laminar Newtonian flow.展开更多
文摘In this research,laminar flow and heat transfer of two-phase water/Ag nanofluid with 0–6%volume fraction of nanoparticles at Re=150–700 in a curved geometry are simulated using finite volume method.Studied geometry is an elliptical curved minichannel with curvature angle of 180°.Forced and natural flow of two-phase nanofluid is simulated at Gr=15000,35000 and 75000.For estimation of nanofluid flow behavior,two-phase mixture method is used.The second-order discretization and SIMPLEC algorithm are used for solving governing equations.The results indicate that the increase of volume fraction of nanoparticles leads to the enhancement of the temperature of central line of flow.The increase of Grashof number(Gr^75000)has a great effect on reduction of dimensionless temperature in central line of flow.Creation of thermal boundary layer at Re=500 and after the angle of 30°becomes significant.In low Grashof numbers(Gr^15000),due to the great effects of temperature gradients close to wall,these regions have significant entropy generation.
文摘In the present paper, in order to clarity the effects of non-Newtonian liquid properties on the flow, similar experiments have been conducted for that of 0.4 wt% polyacrylamide (PAM) aqueous solutions as the working liquid, and air as the working gas. Liquid single-phase and air-liquid two-phase flow experiments were conducted at room temperature using the horizontal rectangular mini-channel with a sudden expansion. The cross-sectional dimensions of the narrow channel upstream from the sudden expansion were 2.79 mm, 3.09 mm and 2.94 mm in the height (H), the width (W) and the hydraulic diameter (DH), while those for the wide channel were 2.95 mm, 5.98 mm and 3.95 mm. The pressure distributions in the channels upstream and downstream from the expansion were measured with calibrated pressure transducer to determine the pressure change due to the expansion. The flow pattern, the bubble velocity, the bubble length, and the void fraction were measured with a high-speed video camera. The flow pattern map is drawn from the observed flow pattern, i.e., bubble flow, slug flow and annular flow in both the wide and the narrow channels. The bubble length data were compared with the calculation by the scaling law proposed by Kanezaki et al. and Kawahara et al. The pressure change data at the expansion were compared with our previous data together with several correlations in literature. Results of such experiment and comparisons are reported in the present paper.
基金the financial support of the National Natural Science Foundation of China (No.U20A20299)the Natural Science Foundation of Guangdong Province (No.2019A1515012119)。
文摘Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer process.In this work,the Discrete Phase Model(DPM) based on the Euler-Lagrangian method is used to numerically investigate the convective heat transfer characteristics of MEPCMS flowing through a rectangular minichannel with constant heat flux.The results show that particles of MEPCMS are mainly subjected to drag force during the flow.Even so,they can migrate from the high-temperature region to the low-temperature region driven by the thermophoretic force,affecting the particle distribution and phase change process.Moreover,the Nux of the MEPCMS fluctuates due to particle phase change with varying specific heat capacities.Specifically,the value increases first,then decreases,and eventually increases again until it approaches the fully developed value of the pure base fluid as the particles gradually melt.Furthermore,the heat transfer performance of the MEPCMS is influenced by the combination of fluid inlet temperature fluid inlet velocity(v),and mass concentration(c_(m)) of MEPCM particles.The result shows that the maximum reduction of the maximum bottom wall temperature difference(ΔT_(w)) is 23.98% at T_(in)=293.15 K,v=0.15 m·s^(-1),c_(m)=10%.
基金partly supported by Deutscher Akademischer Austausch Dienst(German DAAD scholarship),Chinese Scholarship Councilthe National Natural Science Foundation of China(Grant Nos.50436020 and 50176004).
文摘An experimental investigation was conducted on the laminar flow frictional characteristics of suspensions with microencapsulated phase change material (MEPCM) in water flowing through rectangular copper minichannels. The MEPCM was provided at an average particle size of 4.97 μm, and was mixed with distilled water to form suspen- sions with various mass concentrations ranging from 0 to 20%. The experiment was per- formed to explore the effect of MEPCM mass concentration on friction factor and pressure drop in the minichannels. The Reynolds number ranged from 200 to 2000 to provide laminar and transitional flows. It was found that the experimental data for the suspensions with 0 and 5% concentration agree well with the existing theoretical data for an incom- pressible, fully developed, laminar Newtonian flow. For the suspensions with mass con- centrations higher than 10%, there is an obvious increase in friction factor and pressure drop in comparison with laminar Newtonian flow.
