A tri-port MIMO antenna designed for Micro/Pico-Cell application is proposed.It is based on printed elements with X-shaped arms,which are oriented to 0°,120° and240° in the azimuth plane.The arms of the...A tri-port MIMO antenna designed for Micro/Pico-Cell application is proposed.It is based on printed elements with X-shaped arms,which are oriented to 0°,120° and240° in the azimuth plane.The arms of these elements are connected,with which a selfdecoupled structure is formed.The mutual coupling between adjacent elements is below-15 dB.Meanwhile,it size is compact and bidirectional radiation patterns with around 4dBi Gain and 92° 3dB beam width is achieved,which can provide good pattern diversity and full azimuth coverage in real applications.展开更多
The dual-port compact multiple-input multiple-output(MIMO)dipole antennas with close spacing d of 0.5λand 0.3λare designed,and some electromagnetic band gap(EBG)structures are inserted between them to reduce mutual ...The dual-port compact multiple-input multiple-output(MIMO)dipole antennas with close spacing d of 0.5λand 0.3λare designed,and some electromagnetic band gap(EBG)structures are inserted between them to reduce mutual coupling.Those MIMO antennas with d=0.5λand 0.3λ,and with different mutual couplings are fabricated and measured,the channel capacity and correlation coefficient(CC)are analyzed and compared in a rich multipath reverberation chamber(RC),an office and a conference room.Results show that if d is reduced from 0.5λto 0.3λ,in the RCs,channel capacities of all the antennas are very close to that of the i.i.d.Rayleigh channel,although the average CCs are increased from 0.168 in the nonlossy RC to 0.269 in the lossy RC.In the office and conference rooms,compared with the RC,the average capacities of those antennas get a slight reduction,however,in most cases,the capacity of d=0.5λis larger than that of d=0.3λ,and the antennas with EBG have a larger capacity compared with the antennas without EBG,with a corresponding reduction of CC.A non-line-of-sight(NLOS)scenario of through-the-wall is also investigated.展开更多
A4-port multiple-input multiple-output(MIMO)antenna exhibiting lowmutual coupling andUWBperformance is developed.The octagonal-shaped four-antenna elements are connected with a 50microstrip feed line that is arranged...A4-port multiple-input multiple-output(MIMO)antenna exhibiting lowmutual coupling andUWBperformance is developed.The octagonal-shaped four-antenna elements are connected with a 50microstrip feed line that is arranged rotationally to achieve the orthogonal polarization for improving the MIMO system performance.The antenna has a wideband impedance bandwidth of 7.5GHz with S11<−10 dB from(103.44%)3.5–11GHz and inter-element isolation higher than 20 dB.Antenna validation is carried out by verifying the simulated and measured results after fabricating the antenna.The results in the form of omnidirectional radiation patterns,peak gain(≥4 dBi),and Envelope Correlation Coefficient(ECC)(≤0.01)are extracted to validate the suggested antenna performance.Aswell,time-domain analysis was investigated to demonstrate the operation of the suggested antenna in wideband applications.Finally,the simulated and experimental outcomes have almost similar tendenciesmaking the antenna suitable for its use in UWBMIMOapplications.展开更多
A compact self-isolated Multi Input Multi Output (MIMO) antennaarray is presented for 5G mobile phone devices. The proposed antenna systemis operating at the 3.5 GHz band (3400–3600 MHz) and consists of eight antenna...A compact self-isolated Multi Input Multi Output (MIMO) antennaarray is presented for 5G mobile phone devices. The proposed antenna systemis operating at the 3.5 GHz band (3400–3600 MHz) and consists of eight antennaelements placed along two side edges of a mobile device, which meets the currenttrend requirements of full-screen smartphone devices. Each antenna element isdivided into two parts, a front part and back part. The front part consists of anI-shaped feeding line and a modified Hilbert fractal monopole antenna, whereasthe back part is an L-shaped element shorted to the system ground by a0.5 mm short stub. A desirable compactness can be obtained by utilizing the Hilbert space-filling property where the antenna element’s overall planar size printedon the side-edge frame is just (9.57 mm × 5.99 mm). The proposed MIMO antenna system has been simulated, analyzed, fabricated and tested. Based on the selfisolated property, good isolation (better than 15 dB) is attained without employingadditional decoupling elements and/or isolation techniques, which increases system complexity and reduces the antenna efficiency. The scattering parameters,antenna efficiencies, antenna gains, and antenna radiation characteristics areinvestigated to assess the proposed antenna performance. For evaluating the proposed antenna array system performance, the Envelope Correlation Coefficients(ECCs), Mean Effective Gains (MEGs) and channel capacity are calculated.Desirable antenna and MIMO performances are evaluated to confirm the suitability of the proposed MIMO antenna system for 5G mobile terminals.展开更多
The fifth-generation(5G)wireless technology is the most recent standardization in communication services of interest across the globe.The concept of Multiple-Input-Multiple-Output antenna(MIMO)systems has recently bee...The fifth-generation(5G)wireless technology is the most recent standardization in communication services of interest across the globe.The concept of Multiple-Input-Multiple-Output antenna(MIMO)systems has recently been incorporated to operate at higher frequencies without limitations.This paper addresses,design of a high-gain MIMO antenna that offers a bandwidth of 400 MHz and 2.58 GHz by resonating at 28 and 38 GHz,respectively for 5G millimeter(mm)-wave applications.The proposed design is developed on a RT Duroid 5880 substrate with a single elemental dimension of 9.53×7.85×0.8 mm^(3).The patch antenna is fully grounded and is fed with a 50-ohm stepped impedance microstrip line.It also has an I-shaped slot and two electromagnetically coupled parasitic slotted components.This design is initially constructed as a single-element structure and proceeded to a six-element MIMO antenna configuration with overall dimensions of 50×35×0.8 mm^(3).The simulated prototype is fabricated and measured for analyzing its performance characteristics,along with MIMO antenna diversity performance factors making the proposed antenna suitable for 5G mm-wave and 5G-operated handheld devices.展开更多
The massive growth of wireless traffic goes hand in hand with the deployment of advanced radio interfaces as well as network densification. This growth has a direct impact on the radio access architecture, which today...The massive growth of wireless traffic goes hand in hand with the deployment of advanced radio interfaces as well as network densification. This growth has a direct impact on the radio access architecture, which today is moving from centralized to distributed deployments through the use of a large number of access points (APs). This paper verifies the feasibility of deploying multiple APs in series on a single line in a ring topology in a cell-less network. On the one hand, this technique will further improve the communication capacity and flexibility of a Radio-over-Fiber (RoF) based mobile communication system and will reduce its construction cost. And on the other hand, this deployment topology is a solution to achieve a massive cell-free Multiple-Input Multiple-Output (MIMO) architecture and a cost-effective fronthaul solution. First, a passive optical add/drop multiplexer (OADM) is used to extract and add downlink and uplink signals from the remote access points of one kilometer. Then, a deployment model is developed with version 17 Optisystem software. The results obtained showed that the quadrature amplitude modulation (QAM) does not adapt to this multi-carrier transmission to deploy several AP in series on a single line. Thus, the performance degradation increases when the number of APs integrated on the line increases.展开更多
Design of ultra-wideband antennas is challenging in the stringent requirements that are often conflicting to achieve a wide impedance bandwidth while maintaining high radiation efficiency, uniform gain and compact siz...Design of ultra-wideband antennas is challenging in the stringent requirements that are often conflicting to achieve a wide impedance bandwidth while maintaining high radiation efficiency, uniform gain and compact size. A Multiple-Input Multiple-Output (MIMO) antenna system can enhance the overall antenna performance but at having to overcome new challenges such as reducing the mutual coupling and the correlation between the elements. A printed circular disc compact planar antenna is selected in this work due to its UWB performance and compact size for the MIMO antenna system. A parametric analysis is carried out to achieve an optimal design. The system developed consists of two elements with an overall size of 59 × 27 mm. The designed antenna system operates over the whole of the UWB bandwidth from 3.1 to 10.6 GHz with radiation efficiency up to 85% and reflection coefficients less that ?10 dB. The envelope correlation is less than ?60 dB throughout the UWB band while the diversity gain approaches 10 throughout the entire UWB bandwidth and Total Active Reflection Coefficient (TARC) between the antenna elements is less ?11 dB. Thus the proposed MIMO antenna outperforms similar antenna systems reported in the literature.展开更多
A novel compact multiple-input-multiple-output (MIMO) antenna for portable ul-trawideband (UWB) applications is presented. This antenna consists of two modified planar-monopole antenna elements with coplanar waveguide...A novel compact multiple-input-multiple-output (MIMO) antenna for portable ul-trawideband (UWB) applications is presented. This antenna consists of two modified planar-monopole antenna elements with coplanar waveguides-fed printed on one side of the substrate. To enhance isolation and increase impedance bandwidth, a tree like stubs is placed on the ground plane at the 45°axis. The measured results show that the MIMO antenna operates from 2.3 GHz to 13 GHz, covering WLAN, WiMAX, and UWB. The low mutual coupling and low envelope correlation coefficient of less than 0.2 across the whole frequency band proved that this antenna was suitable for MIMO/diversity systems. Also, good performance of radiation patterns and the antenna’s compact size make it a good candidate for portable devices.展开更多
A low profile dual-band multiple-input-multiple-output (MIMO) antenna system is proposed. The proposed MIMO antenna consists of two low profile unbalanced fed inverted L antennas with parasitic elements to resonate at...A low profile dual-band multiple-input-multiple-output (MIMO) antenna system is proposed. The proposed MIMO antenna consists of two low profile unbalanced fed inverted L antennas with parasitic elements to resonate at 2.45 GHz and 5 GHz. The structure is uncomplicated by locating two ultra low profile inverted L antennas on the finite conducting plane. The proposed MIMO antenna is numerically and experimentally analyzed. When the size of conducting plane is 55 mm by 55 mm and the height of antenna is 9 mm, the directive gain of 4.11 dBi and the S11 bandwidth of 5.71% are achieved for lower frequency of 2.45 GHz. At the upper frequency of 5 GHz, the directive gain of 8.22 dBi and the S11 bandwidth of 6% are obtained. The proposed antenna has good diversity gain, shown by the correlation coefficient becomes less than 0.005 at the frequency of 2.45 GHz and 5 GHz band when the distance between inverted L elements is 41 mm. A good agreement between calculated and measured results is obtained. The results show that the weak mutual coupling of the proposed antenna and this feature enables it to cover the required bandwidths for WLAN operation at the 2.4 GHz band and 5 GHz band.展开更多
A three-dimensional （3D） Von Mises Fisher （VMF） distribution model was derived in multiple-input and multiple-output （MIMO） antenna communication environment. The azimuth of arrival and elevation of arrival are ...A three-dimensional （3D） Von Mises Fisher （VMF） distribution model was derived in multiple-input and multiple-output （MIMO） antenna communication environment. The azimuth of arrival and elevation of arrival are distributed for VMF distribution instead of the uniform or other traditional distributions. In particular the MIMO uniform Y-shaped array （UYA） and the uniform circular array （UCA） antenna topology are considered at mobile station and base station. The developed spatial fading correlation of the VMF model is determined by parameters of the concentration parameter, antenna spacing, mean azimuth of arrival, mean elevation of arrival. Using the channel model, the effects of the concentration parameter and the mean elevation angle on the capacity of MIMO antenna systems was analyzed. It is shown that the mean elevation of arrival must be taken into account in 3D MIMO communication environment.展开更多
Massive MIMO is one of the key technologies in future 5G communications which can satisfy the requirement of high speed and large capacity. This paper considers antenna selection and power allocation design to promote...Massive MIMO is one of the key technologies in future 5G communications which can satisfy the requirement of high speed and large capacity. This paper considers antenna selection and power allocation design to promote energy conservation then provide good quality of service(QoS) for the whole massive MIMO uplink network. Unlike previous related works, hardware impairment, transmission efficiency, and energy consumption at the circuit and antennas are involved in massive MIMO networks. In order to ensure the QoS, we consider the minimum rate constraint for each user and the system, which increases the complexity of power allocation problem for maximizing energy and spectral efficiency in massive MIMO system. To this end, a quantum-inspired social emotional optimization(QSEO) algorithm is proposed to obtain the optimal power control strategy in massive MIMO uplink networks. Simulation results assess the great advantages of QSEO which previous strategies do not have.展开更多
Massive MIMO systems offer a high spatial resolution that can drastically increase the spectral and/or energy efficiency by employing a large number of antennas at the base station(BS).In a distributed massive MIMO sy...Massive MIMO systems offer a high spatial resolution that can drastically increase the spectral and/or energy efficiency by employing a large number of antennas at the base station(BS).In a distributed massive MIMO system,the capacity of fiber backhaul that links base station and remote radio heads is usually limited,which becomes a bottleneck for realizing the potential performance gain of both downlink and uplink.To solve this problem,we propose a joint antenna selection and user scheduling which is able to achieve a large portion of the potential gain provided by the massive MIMO array with only limited backhaul capacity.Three sub-optimal iterative algorithms with the objective of sumrate maximization are proposed for the joint optimization of antenna selection and user scheduling,either based on greedy fashion or Frobenius-norm criteria.Convergence and complexity analysis are presented for the algorithms.The provided Monte Carlo simulations show that,one of our algorithms achieves a good tradeoff between complexity and performance and thus is especially fit for massive MIMO systems.展开更多
In this paper, the performance of hybrid precoding is investigated for mmWave massive MIMO systems with different antenna arrays. The hybrid precoding with partially connected architecture (PCA) is adopted. The spectr...In this paper, the performance of hybrid precoding is investigated for mmWave massive MIMO systems with different antenna arrays. The hybrid precoding with partially connected architecture (PCA) is adopted. The spectral efficiency (SE) and received energy efficiency (EE) are investigated by considering four types of antenna arrays, including uniform linear array (ULA), uniform rectangular planar array (URPA), uniform hexagonal planar array (UHPA), and uniform circular planar array (UCPA), respectively. We focus on analysis at the antenna response vector and utilize the idea of orthogonal matching pursuit algorithm to seek the optimal hybrid precoder. Furthermore, the trade-off of precoding architectures is studied between SE and received EE. Simulation results show that if the uniform planar array antenna is more concentrated, the SE and receive EE will be higher. Considering SE and received EE, the performance of planar arrays outperform linear array. There exist different optimal radio-frequency chain numbers to maximize the SE for planar array and linear array. In addition, the PCA can achieve relatively higher received EE while the SE is close to the fully connected architecture and the full digital architecture.展开更多
With the explosive growth and need for high-speed wireless communications, more and more energy is consumed to support the required quality of service. Therefore, energy efficient or green communication has become a v...With the explosive growth and need for high-speed wireless communications, more and more energy is consumed to support the required quality of service. Therefore, energy efficient or green communication has become a very hot topic under the ground of limited energy resource and environmentally friendly transmission schemes. MIMO technique is capable of reducing the transmission power thanks to its diversity and multiplexing gain. Moreover, antenna selection(AS) is an alternative to extract many of the benefits in MIMO systems with a reduced cost of complexity and power. Although many works including several survey papers have investigated AS in MIMO systems, the goal of these works is only the capacity maximization or error rate minimization, which fails to guarantee the optimality of the energy efficiency in MIMO systems. In this paper, we overview the state of the art in the AS schemes in energy efficient MIMO systems, the goal of which is to optimize the energy efficiency of the whole system. Specifically, we introduce energy efficient AS in point-to-point MIMO, cooperative MIMO, multiuser MIMO and largescale MIMO systems, respectively. Several challenging and practical issues in this area are also addressed.展开更多
基金This work is supported by the National Basic Research Program of China under Contract 2013CB329002, in part by the National High Technology Research and Development Program of China （863 Program） under Contract 2011AA010202, the National Natural Science Foundation of China under Contract 61271135, the National Science and Technology Major Project of the Ministry of Science and Technology of China 2013ZX03003008- 002.
文摘A tri-port MIMO antenna designed for Micro/Pico-Cell application is proposed.It is based on printed elements with X-shaped arms,which are oriented to 0°,120° and240° in the azimuth plane.The arms of these elements are connected,with which a selfdecoupled structure is formed.The mutual coupling between adjacent elements is below-15 dB.Meanwhile,it size is compact and bidirectional radiation patterns with around 4dBi Gain and 92° 3dB beam width is achieved,which can provide good pattern diversity and full azimuth coverage in real applications.
基金This work was supported by the National Natural Science Foundations of China(Grant No.61771435).
文摘The dual-port compact multiple-input multiple-output(MIMO)dipole antennas with close spacing d of 0.5λand 0.3λare designed,and some electromagnetic band gap(EBG)structures are inserted between them to reduce mutual coupling.Those MIMO antennas with d=0.5λand 0.3λ,and with different mutual couplings are fabricated and measured,the channel capacity and correlation coefficient(CC)are analyzed and compared in a rich multipath reverberation chamber(RC),an office and a conference room.Results show that if d is reduced from 0.5λto 0.3λ,in the RCs,channel capacities of all the antennas are very close to that of the i.i.d.Rayleigh channel,although the average CCs are increased from 0.168 in the nonlossy RC to 0.269 in the lossy RC.In the office and conference rooms,compared with the RC,the average capacities of those antennas get a slight reduction,however,in most cases,the capacity of d=0.5λis larger than that of d=0.3λ,and the antennas with EBG have a larger capacity compared with the antennas without EBG,with a corresponding reduction of CC.A non-line-of-sight(NLOS)scenario of through-the-wall is also investigated.
文摘A4-port multiple-input multiple-output(MIMO)antenna exhibiting lowmutual coupling andUWBperformance is developed.The octagonal-shaped four-antenna elements are connected with a 50microstrip feed line that is arranged rotationally to achieve the orthogonal polarization for improving the MIMO system performance.The antenna has a wideband impedance bandwidth of 7.5GHz with S11<−10 dB from(103.44%)3.5–11GHz and inter-element isolation higher than 20 dB.Antenna validation is carried out by verifying the simulated and measured results after fabricating the antenna.The results in the form of omnidirectional radiation patterns,peak gain(≥4 dBi),and Envelope Correlation Coefficient(ECC)(≤0.01)are extracted to validate the suggested antenna performance.Aswell,time-domain analysis was investigated to demonstrate the operation of the suggested antenna in wideband applications.Finally,the simulated and experimental outcomes have almost similar tendenciesmaking the antenna suitable for its use in UWBMIMOapplications.
文摘A compact self-isolated Multi Input Multi Output (MIMO) antennaarray is presented for 5G mobile phone devices. The proposed antenna systemis operating at the 3.5 GHz band (3400–3600 MHz) and consists of eight antennaelements placed along two side edges of a mobile device, which meets the currenttrend requirements of full-screen smartphone devices. Each antenna element isdivided into two parts, a front part and back part. The front part consists of anI-shaped feeding line and a modified Hilbert fractal monopole antenna, whereasthe back part is an L-shaped element shorted to the system ground by a0.5 mm short stub. A desirable compactness can be obtained by utilizing the Hilbert space-filling property where the antenna element’s overall planar size printedon the side-edge frame is just (9.57 mm × 5.99 mm). The proposed MIMO antenna system has been simulated, analyzed, fabricated and tested. Based on the selfisolated property, good isolation (better than 15 dB) is attained without employingadditional decoupling elements and/or isolation techniques, which increases system complexity and reduces the antenna efficiency. The scattering parameters,antenna efficiencies, antenna gains, and antenna radiation characteristics areinvestigated to assess the proposed antenna performance. For evaluating the proposed antenna array system performance, the Envelope Correlation Coefficients(ECCs), Mean Effective Gains (MEGs) and channel capacity are calculated.Desirable antenna and MIMO performances are evaluated to confirm the suitability of the proposed MIMO antenna system for 5G mobile terminals.
文摘The fifth-generation(5G)wireless technology is the most recent standardization in communication services of interest across the globe.The concept of Multiple-Input-Multiple-Output antenna(MIMO)systems has recently been incorporated to operate at higher frequencies without limitations.This paper addresses,design of a high-gain MIMO antenna that offers a bandwidth of 400 MHz and 2.58 GHz by resonating at 28 and 38 GHz,respectively for 5G millimeter(mm)-wave applications.The proposed design is developed on a RT Duroid 5880 substrate with a single elemental dimension of 9.53×7.85×0.8 mm^(3).The patch antenna is fully grounded and is fed with a 50-ohm stepped impedance microstrip line.It also has an I-shaped slot and two electromagnetically coupled parasitic slotted components.This design is initially constructed as a single-element structure and proceeded to a six-element MIMO antenna configuration with overall dimensions of 50×35×0.8 mm^(3).The simulated prototype is fabricated and measured for analyzing its performance characteristics,along with MIMO antenna diversity performance factors making the proposed antenna suitable for 5G mm-wave and 5G-operated handheld devices.
文摘The massive growth of wireless traffic goes hand in hand with the deployment of advanced radio interfaces as well as network densification. This growth has a direct impact on the radio access architecture, which today is moving from centralized to distributed deployments through the use of a large number of access points (APs). This paper verifies the feasibility of deploying multiple APs in series on a single line in a ring topology in a cell-less network. On the one hand, this technique will further improve the communication capacity and flexibility of a Radio-over-Fiber (RoF) based mobile communication system and will reduce its construction cost. And on the other hand, this deployment topology is a solution to achieve a massive cell-free Multiple-Input Multiple-Output (MIMO) architecture and a cost-effective fronthaul solution. First, a passive optical add/drop multiplexer (OADM) is used to extract and add downlink and uplink signals from the remote access points of one kilometer. Then, a deployment model is developed with version 17 Optisystem software. The results obtained showed that the quadrature amplitude modulation (QAM) does not adapt to this multi-carrier transmission to deploy several AP in series on a single line. Thus, the performance degradation increases when the number of APs integrated on the line increases.
文摘Design of ultra-wideband antennas is challenging in the stringent requirements that are often conflicting to achieve a wide impedance bandwidth while maintaining high radiation efficiency, uniform gain and compact size. A Multiple-Input Multiple-Output (MIMO) antenna system can enhance the overall antenna performance but at having to overcome new challenges such as reducing the mutual coupling and the correlation between the elements. A printed circular disc compact planar antenna is selected in this work due to its UWB performance and compact size for the MIMO antenna system. A parametric analysis is carried out to achieve an optimal design. The system developed consists of two elements with an overall size of 59 × 27 mm. The designed antenna system operates over the whole of the UWB bandwidth from 3.1 to 10.6 GHz with radiation efficiency up to 85% and reflection coefficients less that ?10 dB. The envelope correlation is less than ?60 dB throughout the UWB band while the diversity gain approaches 10 throughout the entire UWB bandwidth and Total Active Reflection Coefficient (TARC) between the antenna elements is less ?11 dB. Thus the proposed MIMO antenna outperforms similar antenna systems reported in the literature.
文摘A novel compact multiple-input-multiple-output (MIMO) antenna for portable ul-trawideband (UWB) applications is presented. This antenna consists of two modified planar-monopole antenna elements with coplanar waveguides-fed printed on one side of the substrate. To enhance isolation and increase impedance bandwidth, a tree like stubs is placed on the ground plane at the 45°axis. The measured results show that the MIMO antenna operates from 2.3 GHz to 13 GHz, covering WLAN, WiMAX, and UWB. The low mutual coupling and low envelope correlation coefficient of less than 0.2 across the whole frequency band proved that this antenna was suitable for MIMO/diversity systems. Also, good performance of radiation patterns and the antenna’s compact size make it a good candidate for portable devices.
文摘A low profile dual-band multiple-input-multiple-output (MIMO) antenna system is proposed. The proposed MIMO antenna consists of two low profile unbalanced fed inverted L antennas with parasitic elements to resonate at 2.45 GHz and 5 GHz. The structure is uncomplicated by locating two ultra low profile inverted L antennas on the finite conducting plane. The proposed MIMO antenna is numerically and experimentally analyzed. When the size of conducting plane is 55 mm by 55 mm and the height of antenna is 9 mm, the directive gain of 4.11 dBi and the S11 bandwidth of 5.71% are achieved for lower frequency of 2.45 GHz. At the upper frequency of 5 GHz, the directive gain of 8.22 dBi and the S11 bandwidth of 6% are obtained. The proposed antenna has good diversity gain, shown by the correlation coefficient becomes less than 0.005 at the frequency of 2.45 GHz and 5 GHz band when the distance between inverted L elements is 41 mm. A good agreement between calculated and measured results is obtained. The results show that the weak mutual coupling of the proposed antenna and this feature enables it to cover the required bandwidths for WLAN operation at the 2.4 GHz band and 5 GHz band.
基金supported by the National Natural Science Foundation of China (61372128, 61471153)the Jiangsu Province Research Scheme of Natural Science for Higher Education Institute (14KJA510001)the Jiangsu Province Graduate Students Scientific Rosearch Innovation for Higher Education Institute (KYYLX-0854)
文摘A three-dimensional （3D） Von Mises Fisher （VMF） distribution model was derived in multiple-input and multiple-output （MIMO） antenna communication environment. The azimuth of arrival and elevation of arrival are distributed for VMF distribution instead of the uniform or other traditional distributions. In particular the MIMO uniform Y-shaped array （UYA） and the uniform circular array （UCA） antenna topology are considered at mobile station and base station. The developed spatial fading correlation of the VMF model is determined by parameters of the concentration parameter, antenna spacing, mean azimuth of arrival, mean elevation of arrival. Using the channel model, the effects of the concentration parameter and the mean elevation angle on the capacity of MIMO antenna systems was analyzed. It is shown that the mean elevation of arrival must be taken into account in 3D MIMO communication environment.
文摘双基地多输入多输出(Multiple-Input Multiple-Output, MIMO)雷达阵元故障会导致三阶观测张量中出现缺失切片数据,严重影响目标角度估计性能。为此,提出一种基于原子范数的阵元故障MIMO雷达差分共阵角度估计方法。首先,对MIMO雷达三阶观测张量进行PARAFAC分解得到收发阵列的不完整因子矩阵;然后,利用收发阵列的因子矩阵分别获得发射和接收差分共阵的导向矩阵,并利用差分共阵的冗余度对故障阵元缺失数据进行填充,从而得到等效虚拟收发阵列的虚拟因子矩阵;最后,为了填补等效虚拟阵列中的空洞,分别对等效虚拟收发阵列的虚拟因子矩阵建立原子范数约束下的低秩矩阵重构模型,并将其表述为半正定规划(Semi-definite Programming, SDP)问题,利用交替方向乘子法(Alternating Direction Method of Multipliers, ADMM)求解该矩阵重构模型。仿真结果表明,所提方法可以有效重构出不完整因子矩阵中的缺失数据,从而改善MIMO雷达阵元故障下的角度估计性能。
基金supported by the National Natural Science Foundation of China (No. 61571149)the Special China Postdoctoral Science Foundation (2015T80325)+1 种基金the Fun-damental Research Funds for the Central Universities (HEUCFP201808)the China Postdoctoral Science Foundation (2013M530148)
文摘Massive MIMO is one of the key technologies in future 5G communications which can satisfy the requirement of high speed and large capacity. This paper considers antenna selection and power allocation design to promote energy conservation then provide good quality of service(QoS) for the whole massive MIMO uplink network. Unlike previous related works, hardware impairment, transmission efficiency, and energy consumption at the circuit and antennas are involved in massive MIMO networks. In order to ensure the QoS, we consider the minimum rate constraint for each user and the system, which increases the complexity of power allocation problem for maximizing energy and spectral efficiency in massive MIMO system. To this end, a quantum-inspired social emotional optimization(QSEO) algorithm is proposed to obtain the optimal power control strategy in massive MIMO uplink networks. Simulation results assess the great advantages of QSEO which previous strategies do not have.
基金supported in part by National Natural Science Foundation of China No.61171080
文摘Massive MIMO systems offer a high spatial resolution that can drastically increase the spectral and/or energy efficiency by employing a large number of antennas at the base station(BS).In a distributed massive MIMO system,the capacity of fiber backhaul that links base station and remote radio heads is usually limited,which becomes a bottleneck for realizing the potential performance gain of both downlink and uplink.To solve this problem,we propose a joint antenna selection and user scheduling which is able to achieve a large portion of the potential gain provided by the massive MIMO array with only limited backhaul capacity.Three sub-optimal iterative algorithms with the objective of sumrate maximization are proposed for the joint optimization of antenna selection and user scheduling,either based on greedy fashion or Frobenius-norm criteria.Convergence and complexity analysis are presented for the algorithms.The provided Monte Carlo simulations show that,one of our algorithms achieves a good tradeoff between complexity and performance and thus is especially fit for massive MIMO systems.
基金supported by the National Natural Science Foundation of China (No.61961018)the Jiangxi Province Foundation for Distinguished Young Scholar (No.20192BCB23013)+1 种基金the Jiangxi Province Natural Science Foundation of China (No.20171BAB202001, 20192ACB21003)the Science Program of Jiangxi Educational Committee (No.GJJ180307)
文摘In this paper, the performance of hybrid precoding is investigated for mmWave massive MIMO systems with different antenna arrays. The hybrid precoding with partially connected architecture (PCA) is adopted. The spectral efficiency (SE) and received energy efficiency (EE) are investigated by considering four types of antenna arrays, including uniform linear array (ULA), uniform rectangular planar array (URPA), uniform hexagonal planar array (UHPA), and uniform circular planar array (UCPA), respectively. We focus on analysis at the antenna response vector and utilize the idea of orthogonal matching pursuit algorithm to seek the optimal hybrid precoder. Furthermore, the trade-off of precoding architectures is studied between SE and received EE. Simulation results show that if the uniform planar array antenna is more concentrated, the SE and receive EE will be higher. Considering SE and received EE, the performance of planar arrays outperform linear array. There exist different optimal radio-frequency chain numbers to maximize the SE for planar array and linear array. In addition, the PCA can achieve relatively higher received EE while the SE is close to the fully connected architecture and the full digital architecture.
基金supported by NSFC under grant No. 61322111 and No. 61401249the National Basic Research Program of China (973 Program) No. 2013CB336600+1 种基金Specialized Research Fund for the Doctoral Program of Higher Education (SRFDP) under Grant No. 20130002120001Chuanxin Funding, and Beijing nova program No.Z121101002512051
文摘With the explosive growth and need for high-speed wireless communications, more and more energy is consumed to support the required quality of service. Therefore, energy efficient or green communication has become a very hot topic under the ground of limited energy resource and environmentally friendly transmission schemes. MIMO technique is capable of reducing the transmission power thanks to its diversity and multiplexing gain. Moreover, antenna selection(AS) is an alternative to extract many of the benefits in MIMO systems with a reduced cost of complexity and power. Although many works including several survey papers have investigated AS in MIMO systems, the goal of these works is only the capacity maximization or error rate minimization, which fails to guarantee the optimality of the energy efficiency in MIMO systems. In this paper, we overview the state of the art in the AS schemes in energy efficient MIMO systems, the goal of which is to optimize the energy efficiency of the whole system. Specifically, we introduce energy efficient AS in point-to-point MIMO, cooperative MIMO, multiuser MIMO and largescale MIMO systems, respectively. Several challenging and practical issues in this area are also addressed.
