A multi-functional micro-arc plasma spraying system was developed according to aerodynamics and plasma spray theory. The soft switch IGBT （Insulated Gate Bipolar Transistor） invert technique, micro-computer control ...A multi-functional micro-arc plasma spraying system was developed according to aerodynamics and plasma spray theory. The soft switch IGBT （Insulated Gate Bipolar Transistor） invert technique, micro-computer control technique, convergent-divergent nozzle structure and axial powder feeding techniques have been adopted in the design of the micro-arc plasma spraying system. It is not only characterized by a small volume, a light weight, highly accurate control, high deposition efficiency and high reliability, but also has multi-functions in plasma spraying, welding and quenching. The experimental results showed that the system can produce a supersonic flame at a low power, spray Al2O3 particles at an average speed up to 430 m/s, and make nanostructured AT13 coatings with an average bonding strength of 42.7 MPa. Compared to conventional 9M plasma spraying with a higher power, the coatings with almost the same properties as those by conventional plasma spray can be deposited by multi-functional micro-arc plasma spraying with a lower power plasma arc due to an improved power supply design, spray gun structure and powder feeding method. Moreover, this system is suitable for working with thin parts and undertaking on site repairs, and as a result, the application of plasma spraying will be greatly extended.展开更多
Ceramic coatings were prepared on Ti-6Al-4V alloy in NaAlO2 solution by micro-plasma oxidation （MPO）. The salt spray tests of the coated samples and the substrates were carded out in a salt spray test machine. The p...Ceramic coatings were prepared on Ti-6Al-4V alloy in NaAlO2 solution by micro-plasma oxidation （MPO）. The salt spray tests of the coated samples and the substrates were carded out in a salt spray test machine. The phase composition and surface morphology of the coatings were investigated by XRD and SEAM. Severe corrosion occurred on the substrate surface, while there were no obvious corrosion phenomena on the coated samples. The coatings were composed of Al2TiO5 and a little α-Al2O3 and mille TiO2, and the salt spray test did not change the composition of the coatings. The weight loss rate of the coatings decreased with increasing MPO time because of the increase in density and thickness of the coatings. The surface morphology of the coatings was influenced by salt spray corrosion test. Among the coated samples, the coating prepared for 2 h has the best corrosion resistance under salt spray test.展开更多
In this study, compounded surface modification technology-high current pulsed electron beam （HCPEB） ＋ micro-plasma oxidation （MPO） was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of...In this study, compounded surface modification technology-high current pulsed electron beam （HCPEB） ＋ micro-plasma oxidation （MPO） was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of ZK60 Mg alloy after single MPO and HCPEB＋MPO compounded treatment were investigated by SEM. The results showed that the density of the ceramic layer of HCPEB＋MPO-treated ZK60 Mg alloy was improved and defects were reduced compared to that under MPO treatment alone. Surface modified layer of ZK60 Mg alloys treated by HCPEB＋MPO was divided into three zones, namely the top loose ceramic zone, middle compact zone and inside HCPEB-induced melted zone. Corrosion resistance of ZK60 Mg alloy before and after the compounded surface modification was measured in a solution of 3.5% NaCl by potentiodynamic polarization curves. It was found that the corrosion current density of ZK60 Mg alloys could be reduced by about three orders of magnitude, from 311μA/cm^2 of the original sample to 0.2μA/cm^2 of the HCPEB＋MPO-treated sample. This indicates the great application potential of the HCPEB＋MPO compounded surface modification technology in improving the corrosion resistance of ZK60 Mg alloys in the future.展开更多
Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface morphology, element distribution and interface structure...Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface morphology, element distribution and interface structure of composite coatings were studied by means of XRD, SEM and EDS. The results show that the composite coatings obtained through HDA/MPO on A3 steel consist of four layers. From the surface to the substrate, the layer is loose Al2O3 ceramic, compact Al2O3 ceramic, Al and FeAl intermetallic compound layer in turn. The adhesions among all the layers are strengthened because the ceramic layer formed at the Al surface originally, FeAl intermetallic compound layer and substrate are combined in metallurgical form through mutual diffusion during HDA process.Initial experiment results disclose that the anti-corrosion performance and wear resistance of composite coating are obviously improved through HDA/MPO treatment.展开更多
Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar micro-plasma oxidation (MPO) in NaAlO2 solution. The phase composition was studied by XRD. And the electrochemical imped...Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar micro-plasma oxidation (MPO) in NaAlO2 solution. The phase composition was studied by XRD. And the electrochemical impedance spectra (EIS) of the coatings were measured to study the structure of the coatings, combined with the surface morphology. Using the proper EIS interpreting software, the "equivalent circuit" of the coatings was established, and meanwhile fitting values of equivalent element were obtained. The results show that the coating is composed of Al2 TiO5, α-Al2O3 and rutile TiO2, of which Al2 TiO5 is the main crystalline. Increasing the MPO time, the contents of Al2TiO5, rutile TiO2 and α-Al2O3 in the surface of the coating increase. And the EIS analysis and the surface morphology of the coatings illustrates the double-layer structure of the coatings, and the outer layer is loosen and the inner layer is compact. With the increase of the oxidizing time, the surface coarse degree of the coatings and the porosity of the outer layer of the coating are increased while the compactness of the inner layer of the coating is improved.展开更多
Electrical property of a micro-plasma spray system with different working-gas feed- ing schemes was tested to optimize the plasma spray process. The arc voltage with an integrated gas injection mode is higher than tha...Electrical property of a micro-plasma spray system with different working-gas feed- ing schemes was tested to optimize the plasma spray process. The arc voltage with an integrated gas injection mode is higher than that with radial injection or axial injection modes. Thus, an integrated gas injection mode with an excellent electrical characteristic was adopted to deposit alumina-titania coating. The microstructure, bonding strength and hardness of the plasma sprayed alumina-titania coating, as a function of the spraying parameters, e.g., plasma current, gas flow rate and gas pressure, were studied. It was shown that the spraying parameters affected remarkably on the microstructure of the coating. Different tendencies in bonding strength and hardness were also shown for different spraying parameters. At an arc current of 250 A, a gas flow rate of 20 L/min and a gas pressure of 0.5 MPa, the bonding strength and micro-hardness of the coatings reach 40.6 MPa and HV1406.1, respectively.展开更多
Compound ceramics coatings on the Ti-6Al-4V alloy were prepared by the direct current micro-plasma oxidation （MPO） in NaAlO2 solution. The composition and morphology of the coatings were studied with the X-ray diffr...Compound ceramics coatings on the Ti-6Al-4V alloy were prepared by the direct current micro-plasma oxidation （MPO） in NaAlO2 solution. The composition and morphology of the coatings were studied with the X-ray diffraction （XRD） and the scanning electron microscopy （SEM）, respectively. Inductively coupled plasma atomic emission spectrometer technique was used to analyze the solution features of Ti-6Al-4V alloy in the process of preparation. The results reveal that Al2TiO5 forms in the coatings at the initial stages of MPO reaction, and its content changes rapidly with the reaction continuing： after 20 min, the ceramics coatings are composed of α-Al2O3, 7-Al2O3 and Al2TiO5, but after 40 min, its main composition is of α-Al2O3. The content of Ti in the solution will increase when the MPO time extends, and as will Al in the anode area until, after 30 min, it reaches the maximum and keeps constant from then on. Both substrata of Ti and Al in the electrolyte join the MPO reaction at the initial stage, where the formation of Al2TiO5 happens; but as the MPO reaction prolongs, more and more Al in the electrolyte will take part in the reaction, leading to the appearance of a large amount ofAl2O3.展开更多
As a promising cancer treatment method,cold atmospheric plasma has received widespread attention in recent years.However,previous research has focused more on how to realize and expand the anti-cancer scope of plasma ...As a promising cancer treatment method,cold atmospheric plasma has received widespread attention in recent years.However,previous research has focused more on how to realize and expand the anti-cancer scope of plasma jet.There are also studies on the killing of small-scale cancer cells,but the effects of plasma jet on normal cells and normal cell clusters have been ignored.Therefore,we proposed a 50μm sized micro-plasma jet device,and used the device to treat melanoma cells(A-375)and human glial cells(HA1800)to evaluate their anti-cancer effects and effects on normal cells.The experimental results show that this kind of micro-plasma jet device can effectively inactivate cancer cells in a short period of time,while having little effect on normal cells.This work provides a certain experimental basis for the application offine plasma jet to clinically inactivate cancer cells.展开更多
We reported a coaxial,micro-dielectric barrier discharge(micro-DBD)reactor and a conventional DBD reactor for the direct conversion of methane into higher hydrocarbons at atmospheric pressure.The effects of input powe...We reported a coaxial,micro-dielectric barrier discharge(micro-DBD)reactor and a conventional DBD reactor for the direct conversion of methane into higher hydrocarbons at atmospheric pressure.The effects of input power,residence time,discharge gap and external electrode length were investigated for methane conversion and product selectivity.We found the conversion of methane in a micro-DBD reactor was higher than that in a conventional DBD reactor.And at an input power of 25.0 W,the conversion of methane and the total C2+C3 selectivity reached 25.10% and 80.27%,respectively,with a micro-DBD reactor of 0.4 mm discharge gap.Finally,a nonlinear multiple regression model was used to study the correlations between both methane conversion and product selectivity and various system variables.The calculated data were obtained using SPSS 12.0 software.The regression analysis illustrated the correlations between system variables and both methane conversion and product selectivity.展开更多
Micro-plasma oxidation (MPO) technique is a new technique by which compound ceramic coating can be grown in situ on Al, Ti, Mg and many other valve-metals. Compound ceramic coatings on Ti-6Al-4V alloy were prepared fo...Micro-plasma oxidation (MPO) technique is a new technique by which compound ceramic coating can be grown in situ on Al, Ti, Mg and many other valve-metals. Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar MPO in NaAlO2 solution. The phase composition, morphology and the element distribution of the coatings were studied by XRD, SEM and JEOL SUPERPROBE 733 electric probe, respectively. Electrochemical Impedance Spectra (EIS) of the coatings were measured to study the structure character of the coatings. Through the proper EIS interpreting software, the "equivalent circuit" of the coatings was established, and the fitting values of equivalent element were calculated. The coating is mainly composed of Al2TiO5, a-A12O3 and rutile TiO2. The content of Ti element in the coating is less than that of substrate; its distribution is relatively uniform, and Ti in the outer layer is less than that in the inner layer. The content of Al in the coating is more than that of substrate, and its distribution is not even: Al in the middle part is more than that on both sides of the coating; And the EIS analysis has illustrated the double-layer structure of the coatings, and the outside layer is loosen and the inner layer compact; with the increase of the oxidizing time, the surface roughness of the coatings, and the porosity of the outer layer of the coating are increased while the compactness of the inner layer of the coatings are improved.展开更多
A correlation model between micro plasma noise and gamma irradiation of GaN-based LED is built.The reverse bias I-V characteristics and micro-plasma noise were measured in it, before and after Gamma irradiation. It is...A correlation model between micro plasma noise and gamma irradiation of GaN-based LED is built.The reverse bias I-V characteristics and micro-plasma noise were measured in it, before and after Gamma irradiation. It is found that even after 30 krad Gamma irradiation, the GaN-based LED has soft breakdown failure. The reverse soft breakdown region current local instability of this device before irradiation is analyzed by the microplasma noise method. The results were obtained that if the GaN-based LED contained micro-plasma defects, it will fail after low doses（30 krad） of gamma irradiation. The results clearly reflect the micro-plasma defects induced carriers fluctuation noise and the local instability of GaN-based LED reverse bias current.展开更多
文摘A multi-functional micro-arc plasma spraying system was developed according to aerodynamics and plasma spray theory. The soft switch IGBT （Insulated Gate Bipolar Transistor） invert technique, micro-computer control technique, convergent-divergent nozzle structure and axial powder feeding techniques have been adopted in the design of the micro-arc plasma spraying system. It is not only characterized by a small volume, a light weight, highly accurate control, high deposition efficiency and high reliability, but also has multi-functions in plasma spraying, welding and quenching. The experimental results showed that the system can produce a supersonic flame at a low power, spray Al2O3 particles at an average speed up to 430 m/s, and make nanostructured AT13 coatings with an average bonding strength of 42.7 MPa. Compared to conventional 9M plasma spraying with a higher power, the coatings with almost the same properties as those by conventional plasma spray can be deposited by multi-functional micro-arc plasma spraying with a lower power plasma arc due to an improved power supply design, spray gun structure and powder feeding method. Moreover, this system is suitable for working with thin parts and undertaking on site repairs, and as a result, the application of plasma spraying will be greatly extended.
基金the National Natural Science Foundation of China (No. 50171026)the Natu-ral Science Foundation of Heilongjiang Province, China (No. E2007-36).
文摘Ceramic coatings were prepared on Ti-6Al-4V alloy in NaAlO2 solution by micro-plasma oxidation （MPO）. The salt spray tests of the coated samples and the substrates were carded out in a salt spray test machine. The phase composition and surface morphology of the coatings were investigated by XRD and SEAM. Severe corrosion occurred on the substrate surface, while there were no obvious corrosion phenomena on the coated samples. The coatings were composed of Al2TiO5 and a little α-Al2O3 and mille TiO2, and the salt spray test did not change the composition of the coatings. The weight loss rate of the coatings decreased with increasing MPO time because of the increase in density and thickness of the coatings. The surface morphology of the coatings was influenced by salt spray corrosion test. Among the coated samples, the coating prepared for 2 h has the best corrosion resistance under salt spray test.
基金supported by Liaoning BaiQianWan Talents Program of China (No. 2008921028)Doctoral Fund of Ministry of Education of China (No. 200801451082)
文摘In this study, compounded surface modification technology-high current pulsed electron beam （HCPEB） ＋ micro-plasma oxidation （MPO） was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of ZK60 Mg alloy after single MPO and HCPEB＋MPO compounded treatment were investigated by SEM. The results showed that the density of the ceramic layer of HCPEB＋MPO-treated ZK60 Mg alloy was improved and defects were reduced compared to that under MPO treatment alone. Surface modified layer of ZK60 Mg alloys treated by HCPEB＋MPO was divided into three zones, namely the top loose ceramic zone, middle compact zone and inside HCPEB-induced melted zone. Corrosion resistance of ZK60 Mg alloy before and after the compounded surface modification was measured in a solution of 3.5% NaCl by potentiodynamic polarization curves. It was found that the corrosion current density of ZK60 Mg alloys could be reduced by about three orders of magnitude, from 311μA/cm^2 of the original sample to 0.2μA/cm^2 of the HCPEB＋MPO-treated sample. This indicates the great application potential of the HCPEB＋MPO compounded surface modification technology in improving the corrosion resistance of ZK60 Mg alloys in the future.
基金Project(50071066) supported by the National Natural Science Foundation of China Project(B41) supported by the Doctoral Foundation of Yanshan University, China Project(YDJJ: 0169) supported by the Science & Technology Foundation of Yanshan University, China
文摘Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface morphology, element distribution and interface structure of composite coatings were studied by means of XRD, SEM and EDS. The results show that the composite coatings obtained through HDA/MPO on A3 steel consist of four layers. From the surface to the substrate, the layer is loose Al2O3 ceramic, compact Al2O3 ceramic, Al and FeAl intermetallic compound layer in turn. The adhesions among all the layers are strengthened because the ceramic layer formed at the Al surface originally, FeAl intermetallic compound layer and substrate are combined in metallurgical form through mutual diffusion during HDA process.Initial experiment results disclose that the anti-corrosion performance and wear resistance of composite coating are obviously improved through HDA/MPO treatment.
基金Project (50171026) supported by the National Natural Science Foundation of China
文摘Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar micro-plasma oxidation (MPO) in NaAlO2 solution. The phase composition was studied by XRD. And the electrochemical impedance spectra (EIS) of the coatings were measured to study the structure of the coatings, combined with the surface morphology. Using the proper EIS interpreting software, the "equivalent circuit" of the coatings was established, and meanwhile fitting values of equivalent element were obtained. The results show that the coating is composed of Al2 TiO5, α-Al2O3 and rutile TiO2, of which Al2 TiO5 is the main crystalline. Increasing the MPO time, the contents of Al2TiO5, rutile TiO2 and α-Al2O3 in the surface of the coating increase. And the EIS analysis and the surface morphology of the coatings illustrates the double-layer structure of the coatings, and the outer layer is loosen and the inner layer is compact. With the increase of the oxidizing time, the surface coarse degree of the coatings and the porosity of the outer layer of the coating are increased while the compactness of the inner layer of the coating is improved.
文摘Electrical property of a micro-plasma spray system with different working-gas feed- ing schemes was tested to optimize the plasma spray process. The arc voltage with an integrated gas injection mode is higher than that with radial injection or axial injection modes. Thus, an integrated gas injection mode with an excellent electrical characteristic was adopted to deposit alumina-titania coating. The microstructure, bonding strength and hardness of the plasma sprayed alumina-titania coating, as a function of the spraying parameters, e.g., plasma current, gas flow rate and gas pressure, were studied. It was shown that the spraying parameters affected remarkably on the microstructure of the coating. Different tendencies in bonding strength and hardness were also shown for different spraying parameters. At an arc current of 250 A, a gas flow rate of 20 L/min and a gas pressure of 0.5 MPa, the bonding strength and micro-hardness of the coatings reach 40.6 MPa and HV1406.1, respectively.
基金National Natural Science Foundation of China (50171026)
文摘Compound ceramics coatings on the Ti-6Al-4V alloy were prepared by the direct current micro-plasma oxidation （MPO） in NaAlO2 solution. The composition and morphology of the coatings were studied with the X-ray diffraction （XRD） and the scanning electron microscopy （SEM）, respectively. Inductively coupled plasma atomic emission spectrometer technique was used to analyze the solution features of Ti-6Al-4V alloy in the process of preparation. The results reveal that Al2TiO5 forms in the coatings at the initial stages of MPO reaction, and its content changes rapidly with the reaction continuing： after 20 min, the ceramics coatings are composed of α-Al2O3, 7-Al2O3 and Al2TiO5, but after 40 min, its main composition is of α-Al2O3. The content of Ti in the solution will increase when the MPO time extends, and as will Al in the anode area until, after 30 min, it reaches the maximum and keeps constant from then on. Both substrata of Ti and Al in the electrolyte join the MPO reaction at the initial stage, where the formation of Al2TiO5 happens; but as the MPO reaction prolongs, more and more Al in the electrolyte will take part in the reaction, leading to the appearance of a large amount ofAl2O3.
基金supported by the National Natural Science Foundation of China under Grant Number 62163009 and 61864001the Natural Science Foundation of GuangXi under Grant Number 2021JJD170019+2 种基金the Foundation of Guangxi Key Laboratory of Automatic Detecting Technology and Instruments(Guilin University of Electronic Technology)under Grant Number YQ23103Innovation Project of GuangXi Graduate Education under Grant Nos.YCSW2022277 and 2023YCXS184Guangxi Major Scientific and Technological Innovation Base(Guilin University of Electronic Technology)under Grant 231002-k.
文摘As a promising cancer treatment method,cold atmospheric plasma has received widespread attention in recent years.However,previous research has focused more on how to realize and expand the anti-cancer scope of plasma jet.There are also studies on the killing of small-scale cancer cells,but the effects of plasma jet on normal cells and normal cell clusters have been ignored.Therefore,we proposed a 50μm sized micro-plasma jet device,and used the device to treat melanoma cells(A-375)and human glial cells(HA1800)to evaluate their anti-cancer effects and effects on normal cells.The experimental results show that this kind of micro-plasma jet device can effectively inactivate cancer cells in a short period of time,while having little effect on normal cells.This work provides a certain experimental basis for the application offine plasma jet to clinically inactivate cancer cells.
基金supported by the National Natural Science Foundation of China (NSFC) under the grant of No.21176175 and No.20606023
文摘We reported a coaxial,micro-dielectric barrier discharge(micro-DBD)reactor and a conventional DBD reactor for the direct conversion of methane into higher hydrocarbons at atmospheric pressure.The effects of input power,residence time,discharge gap and external electrode length were investigated for methane conversion and product selectivity.We found the conversion of methane in a micro-DBD reactor was higher than that in a conventional DBD reactor.And at an input power of 25.0 W,the conversion of methane and the total C2+C3 selectivity reached 25.10% and 80.27%,respectively,with a micro-DBD reactor of 0.4 mm discharge gap.Finally,a nonlinear multiple regression model was used to study the correlations between both methane conversion and product selectivity and various system variables.The calculated data were obtained using SPSS 12.0 software.The regression analysis illustrated the correlations between system variables and both methane conversion and product selectivity.
文摘Micro-plasma oxidation (MPO) technique is a new technique by which compound ceramic coating can be grown in situ on Al, Ti, Mg and many other valve-metals. Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar MPO in NaAlO2 solution. The phase composition, morphology and the element distribution of the coatings were studied by XRD, SEM and JEOL SUPERPROBE 733 electric probe, respectively. Electrochemical Impedance Spectra (EIS) of the coatings were measured to study the structure character of the coatings. Through the proper EIS interpreting software, the "equivalent circuit" of the coatings was established, and the fitting values of equivalent element were calculated. The coating is mainly composed of Al2TiO5, a-A12O3 and rutile TiO2. The content of Ti element in the coating is less than that of substrate; its distribution is relatively uniform, and Ti in the outer layer is less than that in the inner layer. The content of Al in the coating is more than that of substrate, and its distribution is not even: Al in the middle part is more than that on both sides of the coating; And the EIS analysis has illustrated the double-layer structure of the coatings, and the outside layer is loosen and the inner layer compact; with the increase of the oxidizing time, the surface roughness of the coatings, and the porosity of the outer layer of the coating are increased while the compactness of the inner layer of the coatings are improved.
基金Project supported by the Education Department Science and Technology Foundation of Jiangxi Province(No.GJJ160743)the Doctoral Research Start-Up Foundation of Jinggangshan University(No.JZB15001)
文摘A correlation model between micro plasma noise and gamma irradiation of GaN-based LED is built.The reverse bias I-V characteristics and micro-plasma noise were measured in it, before and after Gamma irradiation. It is found that even after 30 krad Gamma irradiation, the GaN-based LED has soft breakdown failure. The reverse soft breakdown region current local instability of this device before irradiation is analyzed by the microplasma noise method. The results were obtained that if the GaN-based LED contained micro-plasma defects, it will fail after low doses（30 krad） of gamma irradiation. The results clearly reflect the micro-plasma defects induced carriers fluctuation noise and the local instability of GaN-based LED reverse bias current.
