We discussed the unsteady flow of an incompressible viscous fluid in a rotating parallel plate channel bounded on one side by a porous bed under the influence of a uniform transverse magnetic field taking hall current...We discussed the unsteady flow of an incompressible viscous fluid in a rotating parallel plate channel bounded on one side by a porous bed under the influence of a uniform transverse magnetic field taking hall current into account. The perturbations are created by a constant pressure gradient along the plates in addition to the non-torsional oscillations of the upper plate. The flow in the clean fluid region is governed by Navier-Stoke’s equations while in the porous bed the equations are based on Darcy-Lapwood model. The exact solutions of velocity in the clean fluid and the porous medium consist of steady state and transient state. The time required for the transient state to decay is evaluated in detail and ultimate quasi-steady state solution has been derived analytically and also its behaviour is computationally discussed with reference to different flow parameters. The shear stresses on the boundaries and the mass flux are also obtained analytically and their behaviour is computationally discussed.展开更多
This paper focuses on the simulation of a fault arc in a closed tank based on the magneto-hydrodynamic （MHD） method, in which a comparative study of three radiation models, including net emission coefficients （NEC...This paper focuses on the simulation of a fault arc in a closed tank based on the magneto-hydrodynamic （MHD） method, in which a comparative study of three radiation models, including net emission coefficients （NEC）, semi-empirical model based on NEC as well as the P1 model, is developed. The pressure rise calculated by the three radiation models are compared to the measured results. Particularly when the senti-empirical model is used, the effect of different boundary temperatures of the re-absorption layer in the semi-empirical model on pressure rise is concentrated on. The results show that the re-absorption effect in the low-temperature region affects radiation transfer of fault arcs evidently, and thus the internal pressure rise. Compared with the NEC model, P1 and the semi-empirical model with 0.7 〈 α 〈 0.83 are more suitable to calculate the pressure rise of the fault arc, where is an adjusted parameter involving the boundary temperature of the re-absorption region in the semi-empirical model.展开更多
The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the resul...The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the results of MHD flow velocity distribution in cross-section of channels (rectangular duct and circular pipe), and the expected results from the modeling are well agreed with the recent experimental data obtained. It is the first modeling which can efficiently explain the experimental results of liquid-metal free surface jet flow.展开更多
The current work combines numerical and experimental investigations based on a small-scale mockup using the eutectic alloy GaInSn.The jet flow discharging from the submerged entry nozzle was exposed perpendicularly to...The current work combines numerical and experimental investigations based on a small-scale mockup using the eutectic alloy GaInSn.The jet flow discharging from the submerged entry nozzle was exposed perpendicularly to a DC magnetic field across the entire wide face of the mold.Numerical calculations were performed by using the commercial package CFX with an implemented RANS-SST turbulence model.The anisotropic properties of the MHD turbulence were taken into account by specific modifications of the turbulence model.The comparison between our numerical calculations and the experimental results shows a very well agreement.In particular,the modified RANS-SST turbulence model is capable to reconstruct the peculiar phenomenon of the excitation of non-steady,non-isotropic large-scale flow perturbations caused by the application of the DC magnetic field.Another important finding of our study is the feature that the electrical boundary conditions,namely the wall conductivity ratio,have a great impact on the mold flow subjected to an external magnetic field.展开更多
The Dufour and Soret effects on the unsteady twodimensional magnetonyaro dynamics （MHD） doublediffusive free convective flow of an electrically conducting fluid past a vertical plate embedded in a nonDarcy porous me...The Dufour and Soret effects on the unsteady twodimensional magnetonyaro dynamics （MHD） doublediffusive free convective flow of an electrically conducting fluid past a vertical plate embedded in a nonDarcy porous medium are investigated numeri cally. The governing nonlinear dimensionless equations are solved by an implicit finite difference scheme of the CrankNicolson type with a tridiagonal matrix manipulation. The effects of various parameters entering into the problem on the unsteady dimension less velocity, temperature, and concentration profiles are studied in detail. Furthermore, the time variation of the skin friction coefficient, the Nusselt number, and the Sherwood number is presented and analyzed. The results show that the unsteady velocity, tem perature, and concentration profiles are substantially influenced by the Dufour and Soret effects. When the Dufour number increases or the Soret number decreases, both the skin friction and the Sherwood number decrease, while the Nusselt number increases. It is found that, when the magnetic parameter increases, the velocity and the temperature decrease in the boundary layer.展开更多
The physical process of capillary discharge in a PE tube utilized in electro-thermal-chemical(ETC)guns was investigated.ETC guns can enhance the ignition and combustion of propellant in order to reduce the ignition de...The physical process of capillary discharge in a PE tube utilized in electro-thermal-chemical(ETC)guns was investigated.ETC guns can enhance the ignition and combustion of propellant in order to reduce the ignition delay and increase muzzle velocity of the projectile.A key component in ETC gun is the capillary plasma source.In this paper,a 2D steady state model of discharge was built by using magnetic hydrodynamics method.It took the plasma energy balance,material ablation,mass and momentum conservations in a quasi-neutral plasma region into account.Also,the effect of different compositions and PE concentration distribution were considered.In order to evaluate the validation of this model,the simulation results are compared with former works.展开更多
In this paper, a logistical regression statistical analysis (LR) is presented for a set of variables used in experimental measurements in reversed field pinch (RFP) machines, commonly known as “slinky mode” (SM), ob...In this paper, a logistical regression statistical analysis (LR) is presented for a set of variables used in experimental measurements in reversed field pinch (RFP) machines, commonly known as “slinky mode” (SM), observed to travel around the torus in Madison Symmetric Torus (MST). The LR analysis is used to utilize the modified Sine-Gordon dynamic equation model to predict with high confidence whether the slinky mode will lock or not lock when compared to the experimentally measured motion of the slinky mode. It is observed that under certain conditions, the slinky mode “locks” at or near the intersection of poloidal and/or toroidal gaps in MST. However, locked mode cease to travel around the torus;while unlocked mode keeps traveling without a change in the energy, making it hard to determine an exact set of conditions to predict locking/unlocking behaviour. The significant key model parameters determined by LR analysis are shown to improve the Sine-Gordon model’s ability to determine the locking/unlocking of magnetohydrodyamic (MHD) modes. The LR analysis of measured variables provides high confidence in anticipating locking versus unlocking of slinky mode proven by relational comparisons between simulations and the experimentally measured motion of the slinky mode in MST.展开更多
文摘We discussed the unsteady flow of an incompressible viscous fluid in a rotating parallel plate channel bounded on one side by a porous bed under the influence of a uniform transverse magnetic field taking hall current into account. The perturbations are created by a constant pressure gradient along the plates in addition to the non-torsional oscillations of the upper plate. The flow in the clean fluid region is governed by Navier-Stoke’s equations while in the porous bed the equations are based on Darcy-Lapwood model. The exact solutions of velocity in the clean fluid and the porous medium consist of steady state and transient state. The time required for the transient state to decay is evaluated in detail and ultimate quasi-steady state solution has been derived analytically and also its behaviour is computationally discussed with reference to different flow parameters. The shear stresses on the boundaries and the mass flux are also obtained analytically and their behaviour is computationally discussed.
基金supported by National Key Basic Research Program of China(973 Program)(No.2015CB251002)National Natural Science Foundation of China(Nos.51221005,51177124)+2 种基金the Fundamental Research Funds for the Central Universitiesthe Program for New Century Excellent Talents in UniversityShaanxi Province Natural Science Foundation of China(No.2013JM-7010)
文摘This paper focuses on the simulation of a fault arc in a closed tank based on the magneto-hydrodynamic （MHD） method, in which a comparative study of three radiation models, including net emission coefficients （NEC）, semi-empirical model based on NEC as well as the P1 model, is developed. The pressure rise calculated by the three radiation models are compared to the measured results. Particularly when the senti-empirical model is used, the effect of different boundary temperatures of the re-absorption layer in the semi-empirical model on pressure rise is concentrated on. The results show that the re-absorption effect in the low-temperature region affects radiation transfer of fault arcs evidently, and thus the internal pressure rise. Compared with the NEC model, P1 and the semi-empirical model with 0.7 〈 α 〈 0.83 are more suitable to calculate the pressure rise of the fault arc, where is an adjusted parameter involving the boundary temperature of the re-absorption region in the semi-empirical model.
基金The project partly supported by National Nature Science Foundation of China (No. 10275019)
文摘The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the results of MHD flow velocity distribution in cross-section of channels (rectangular duct and circular pipe), and the expected results from the modeling are well agreed with the recent experimental data obtained. It is the first modeling which can efficiently explain the experimental results of liquid-metal free surface jet flow.
基金Item Sponsored by Deutsche Forschungsgemeinschaft (DFG) in form of the SFB 609 "Electromagnetic Flow Control in Metallurgy,Crystal Growth and Electrochemistry"
文摘The current work combines numerical and experimental investigations based on a small-scale mockup using the eutectic alloy GaInSn.The jet flow discharging from the submerged entry nozzle was exposed perpendicularly to a DC magnetic field across the entire wide face of the mold.Numerical calculations were performed by using the commercial package CFX with an implemented RANS-SST turbulence model.The anisotropic properties of the MHD turbulence were taken into account by specific modifications of the turbulence model.The comparison between our numerical calculations and the experimental results shows a very well agreement.In particular,the modified RANS-SST turbulence model is capable to reconstruct the peculiar phenomenon of the excitation of non-steady,non-isotropic large-scale flow perturbations caused by the application of the DC magnetic field.Another important finding of our study is the feature that the electrical boundary conditions,namely the wall conductivity ratio,have a great impact on the mold flow subjected to an external magnetic field.
文摘The Dufour and Soret effects on the unsteady twodimensional magnetonyaro dynamics （MHD） doublediffusive free convective flow of an electrically conducting fluid past a vertical plate embedded in a nonDarcy porous medium are investigated numeri cally. The governing nonlinear dimensionless equations are solved by an implicit finite difference scheme of the CrankNicolson type with a tridiagonal matrix manipulation. The effects of various parameters entering into the problem on the unsteady dimension less velocity, temperature, and concentration profiles are studied in detail. Furthermore, the time variation of the skin friction coefficient, the Nusselt number, and the Sherwood number is presented and analyzed. The results show that the unsteady velocity, tem perature, and concentration profiles are substantially influenced by the Dufour and Soret effects. When the Dufour number increases or the Soret number decreases, both the skin friction and the Sherwood number decrease, while the Nusselt number increases. It is found that, when the magnetic parameter increases, the velocity and the temperature decrease in the boundary layer.
文摘The physical process of capillary discharge in a PE tube utilized in electro-thermal-chemical(ETC)guns was investigated.ETC guns can enhance the ignition and combustion of propellant in order to reduce the ignition delay and increase muzzle velocity of the projectile.A key component in ETC gun is the capillary plasma source.In this paper,a 2D steady state model of discharge was built by using magnetic hydrodynamics method.It took the plasma energy balance,material ablation,mass and momentum conservations in a quasi-neutral plasma region into account.Also,the effect of different compositions and PE concentration distribution were considered.In order to evaluate the validation of this model,the simulation results are compared with former works.
文摘In this paper, a logistical regression statistical analysis (LR) is presented for a set of variables used in experimental measurements in reversed field pinch (RFP) machines, commonly known as “slinky mode” (SM), observed to travel around the torus in Madison Symmetric Torus (MST). The LR analysis is used to utilize the modified Sine-Gordon dynamic equation model to predict with high confidence whether the slinky mode will lock or not lock when compared to the experimentally measured motion of the slinky mode. It is observed that under certain conditions, the slinky mode “locks” at or near the intersection of poloidal and/or toroidal gaps in MST. However, locked mode cease to travel around the torus;while unlocked mode keeps traveling without a change in the energy, making it hard to determine an exact set of conditions to predict locking/unlocking behaviour. The significant key model parameters determined by LR analysis are shown to improve the Sine-Gordon model’s ability to determine the locking/unlocking of magnetohydrodyamic (MHD) modes. The LR analysis of measured variables provides high confidence in anticipating locking versus unlocking of slinky mode proven by relational comparisons between simulations and the experimentally measured motion of the slinky mode in MST.
