As a powerful synthetic tool,ruthenium-catalyzed ring-opening metathesis polymerization(ROMP)has been widely utilized to prepare diverse heteroatom-containing polymers.In this contribution,we report the synthesis of t...As a powerful synthetic tool,ruthenium-catalyzed ring-opening metathesis polymerization(ROMP)has been widely utilized to prepare diverse heteroatom-containing polymers.In this contribution,we report the synthesis of the novel imine-based polymer through the copolymerization of cyclooctene with cyclic imine comonomer via ROMP.Because of the efficient hydrolysis reactions of the imine group,the generated copolymer can be easily degraded under mild condition.Moreover,the generated degradable product was the telechelic polymer bearing amine group,which was highly challenged for its direct synthesis.And this telechelic polymer could also be used for the further synthesis of new polymer through post-transformation.The introduction of imine unit in this work provides a new example of the degradable polymer synthesis.展开更多
Mechanochromic polyolefins represent a novel class of functionalized polyolefins,which still remains significant challenges.Pd(II)-catalyzed coordination-insertion copolymerization is a feasible method for achieving t...Mechanochromic polyolefins represent a novel class of functionalized polyolefins,which still remains significant challenges.Pd(II)-catalyzed coordination-insertion copolymerization is a feasible method for achieving this kind of polymers,yet with linear microstructures.Ringopening metathesis polymerization(ROMP)offers another promising avenue for affording functionalized polyolefins.This method exhibits high polar group tolerance and the ability to precisely regulate polymer branches.In this study,we report the method for producing mechanochromic branched polyethylenes via ROMP.By employing the terpolymerization of a well-designed monomer containing the mechanochromic group,NB-ABF,with cyclooctene(COE)and long-chain 5-hexylcyclooctene(COE-C6),following by hydrogenation process,we synthesized a range of functionalized branched polyethylenes characterized by varied branching density and polar monomer incorporation.These polymers bear a structural resemblance to functionalized ethylene-octene copolymers.After crosslinking,mechanochromophores are generated,and mechanochromism is achieved in uniaxial tensile testing.A comprehensive assessment reveals that both the incorporation of polar monomers and variations in branching density significantly influence their mechanical properties.Notably,upon stretching,these materials display pronounced visible color change,confirming the successful development of mechanochromic branched polyethylenes.展开更多
Rare earth ortho-oxomolybdates of composition Ln2/aMoO4 （Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er and Y） were prepared by metathesis reaction. All these materials were characterized by powder X-ray diffraction, Fourier...Rare earth ortho-oxomolybdates of composition Ln2/aMoO4 （Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er and Y） were prepared by metathesis reaction. All these materials were characterized by powder X-ray diffraction, Fourier transform-infrared spectroscopy （FT-IR） and UV-Vis diffuse reflectance spectra. The Rietveld analysis of all the samples was carried out to obtain the unit cell parameters and reliability factors. All the materials were crystallized in tetragonal lattice with I41/a space group. The infrared spectra of all the samples were characterized by bands due to MoO42 units. The bandgap energies of all the samples were obtained from UV-Vis DRS spectra. The luminescence spectra of Ln2/3MoO4 （Ln=Pr, Eu and Dy） showed characteristic transitions of the rare earth ions. The visible light photocatalytic activity of all the samples was studied against degradation of methylene blue.展开更多
Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the...Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the catalytic performance results, induction period and objective product were closely related to the reaction conditions. Lower space velocity led to longer induction period and higher propene yield. The optimal reaction temperature for propene production is around 150 ~C and it shifted to 100 ~C for ethene production. 1-Butene auto-metathesis predominated in the reaction network if the support with lower degree of sodium exchanged. And propene gradually became the dominant product upon increasing the support sodium exchange degree. 6Mo/H100Na0M-30A1 catalyst with a support of full sodium exchange degree exhibited the highest propene yield.展开更多
A novel route involving self‐metathesis of1‐butene under mild conditions that gave high yields ofethene and hexene was proposed.The results of thermodynamic analysis revealed that the Gibbsenergy of the target Metat...A novel route involving self‐metathesis of1‐butene under mild conditions that gave high yields ofethene and hexene was proposed.The results of thermodynamic analysis revealed that the Gibbsenergy of the target Metathesis I reaction(1‐butene?ethene+3‐hexene)was much higher thanthat of the main side Metathesis II(1‐butene+2‐butene?propene+2‐pentene).Suppression of1‐butene double‐bond isomerization was the key step to increase the selectivity for the target olefinin the reaction network.The relationship between the catalytic performance and support nature was investigated in detail.On basis of H2‐TPR,UV‐Vis spectra and HRTEM results,an alumina(Al2O3)support with large surface area was beneficial for the dispersion of molybdenum(Mo)species.Both suitable acidity and sufficient Mo dispersion were important to selectively promote the self‐metathesis reaction of1‐butene.On the optimal6Mo/Al2O3catalyst,1‐butene conversion reached47%and ethene selectivity was as high as42%on the premise of good catalytic stability(80°C,1.0MPa,3h?1).?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.展开更多
High-pressure solid-state metathesis(HPSSM)reaction is an effective route to novel metal nitrides.A recent advance in HPSSM reactions is presented for a number of examples,including 3d transition metal nitrides(ε-Fe_...High-pressure solid-state metathesis(HPSSM)reaction is an effective route to novel metal nitrides.A recent advance in HPSSM reactions is presented for a number of examples,including 3d transition metal nitrides(ε-Fe_(3)N,ε-Fe_(3-x)Co_(x)N,CrN,and Co_(4)N_(x)),4d transition metal nitrides(MoNx),and 5d transition metal nitrides(Re_(3)N,WN_(x)).Thermodynamic investigations based on density functional theory(DFT)calculations on several typical HPSSM reactions between metal oxides and boron nitride indicate that the pressure could reduce the reaction enthalpy △H.High-pressure confining environment thermodynamically favors an ion-exchange process between metal atom and boron atom,and successfully results in the formation of well-crystalized metal nitrides with potential applications.展开更多
(Imido)vanadium(V)-alkylidene complexes of type V(CHSiMe3)(NR)(OR?)(PMe3)2 [R = Ad, C6H5, 2,6-Me2C6H3, 2,6-Cl2C6H3;R?= 2,6-Me2C6H3, 2,6-i Pr2C6H3, 2,6-F2C6H3, C6F5, C6Cl5] exhibited from moderate to remarkable catalyt...(Imido)vanadium(V)-alkylidene complexes of type V(CHSiMe3)(NR)(OR?)(PMe3)2 [R = Ad, C6H5, 2,6-Me2C6H3, 2,6-Cl2C6H3;R?= 2,6-Me2C6H3, 2,6-i Pr2C6H3, 2,6-F2C6H3, C6F5, C6Cl5] exhibited from moderate to remarkable catalytic activities for ringopening metathesis polymerization(ROMP) of norbornene(NBE). The catalytic activities were affected by the ligand substituents, and V(CHSiMe3)(N-2,6-Cl2C6H3)(OC6X5)(PMe3)2(X = F, Cl) demonstrated the exceptionally high catalytic activities for ROMP of NBE.The complexes polymerized cycloheptene(CHPE) and cis-cyclooctene(COE), and ROMP of COE by the OC6 Cl5 analogue proceeded in a living manner even at 80℃, and the activity increased with increasing the temperature up to 120 ℃. Highly active catalysts for ROMP of cyclic olefins(NBE, cyclopentene, and CHPE) can be generated in situ by premixing isolated V(CHSiMe3)(NC6F5)(O-2,6-iPr2C6H3)(PMe3)2 with 1.0 equiv. of C6F5OH or C6Cl5OH via immediate phenoxy exchange;the activity was affected by the kind of phenol added [TOF in the ROMPs of NBE: 4.62 × 10^4 min^–1(upon addition of C6F5OH) versus 37.3 min^–1(none)].展开更多
A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomer...A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomerization of 1-butene to 2-butene and then for the cross-metathesis between 1-butene and 2-butene to propene and 2-pentene. The combination of HY zeolite and Al2O3 is prerequisite for the production of propene. The propene yield keeps increasing with the HY content in the range of 10-70 wt%, where 10WO3/Al2O3-70HY exhibits the highest propene yield. The MS-H2-TPR and MS-O2-TPO characterizations indicate that the increase of HY content in the catalysts weakens the interaction between W species and supports, whereas enhance the probability of coking on the metal species and acid sites.展开更多
Effect of reaction temperature and pressure on the metathesis reaction between ethene and 2-butene to propene was studied on the WO3/γ-Al2O3-HY catalyst. The activity is found to increase with elevated temperature an...Effect of reaction temperature and pressure on the metathesis reaction between ethene and 2-butene to propene was studied on the WO3/γ-Al2O3-HY catalyst. The activity is found to increase with elevated temperature and reaches a plateau at 150-240 ℃. After that, the activity undergoes a remarkable decrement at too high temperature. The effect of temperature is elucidated by the oxidation state of tungsten species. The evaluation results also indicate that the stability is dependent on this reaction parameter. Medium pressure （0.5-0.8 MPa） is favorable for stability, while atmospheric pressure or too high pressure （〉1.0 MPa） deteriorates the stability. For explanation, UV Vis, FT-IR, O2-TPO, and TG techniques are used to characterize the spent catalysts.展开更多
A series of 3.0Mo/MCM-22-Al2O3 catalysts with γ-Al2O3 contents in the range of 0-100 wt% were prepared and applied in the metathesis reaction of ethene and butene-2. Addition of γ-Al2O3did not affect the structure o...A series of 3.0Mo/MCM-22-Al2O3 catalysts with γ-Al2O3 contents in the range of 0-100 wt% were prepared and applied in the metathesis reaction of ethene and butene-2. Addition of γ-Al2O3did not affect the structure of MCM-22 zeolite as evidenced by XRD and N2 adsorption measurements. It was deduced from TPR experiments that γ-Al2O3 phase favored the formation of polymolybdate or multilayered Mo oxide, while more Al2（MoO4）3 species were generated over MCM-22 zeolites. Alumina content in the support was directly related to the metathesis activity of ethene and butene-2 to propene. Mo species with higher valence （Mo6＋or Mo5＋） contributed more to the excellent performance of catalyst than metallic Mo. The best catalyst activity and stability was obtained over 3.0Mo/（MCM-22-30%Al2O3） under the reaction condition of 1.0 MPa and 125℃ using N2 as the pretreatment gas.展开更多
Herein we reported that ferrocene-containing polymers could be synthesized via acyclic diene metathesis （ADMET） polymerization of ferrocene-containing bis-styryl monomers. The all-trans-configured vinylene bonds of ...Herein we reported that ferrocene-containing polymers could be synthesized via acyclic diene metathesis （ADMET） polymerization of ferrocene-containing bis-styryl monomers. The all-trans-configured vinylene bonds of stilbene segment were proven by means of ^13C-NMR, ^1H-NMR, MALDI-TOF mass spectrometry and FTIR. Poly（1） showed maxima for absorption at 320 nm and emission at 430 nm which are structurally very similar to trans-stilbene, but 24 and 16 nm red shifted respectively. CIE chromaticity diagram shows that emission color could be adjusted by controlling the molecular weight. The polymer showed excellent solubility in common organic solvents and good thermal stability evidenced by TGA and DSC. The results of CV suggested the polymer possessed noninteracting metal centers which was confirmed by a reversible one-electron redox wave observed for the polymer.展开更多
Macro-mesoporous γ-alumina support（MMA） was prepared by a sol-gel route in aqueous medium using pseudo-boehmite as aluminum source and polystyrene microspheres and Pluronic P123 as hard and soft dual templates,resp...Macro-mesoporous γ-alumina support（MMA） was prepared by a sol-gel route in aqueous medium using pseudo-boehmite as aluminum source and polystyrene microspheres and Pluronic P123 as hard and soft dual templates,respectively.MMA had a BET specific surface area of about 259 m2 g-1,total pore volume of about 1.61 cm3 g-1,macropore diameter of about 102 nm,and mesopore diameter of about 14 nm.Re2O7/MMA and conventional Re2O7/Al2O3 were prepared by a incipient-wetness impregnation method,and their catalytic performances in the metathesis of 1-butene and 2-butene were tested in a fixed-bed tubular reactor.The result showed that Re2O7/MMA possessed higher activity and far longer working life-span than conventional Re2O7/Al2O3.展开更多
Terminal olefins are important building blocks for the industry of biofuels,oligomers,and lubricants production.The industrial processes for production of olefins involving oligomerization of ethylene or cracking of p...Terminal olefins are important building blocks for the industry of biofuels,oligomers,and lubricants production.The industrial processes for production of olefins involving oligomerization of ethylene or cracking of petrochemical waxes have several flaws including low yield and high cost in product separation.Cross-metathesis of bio-derived unsaturated fatty esters and olefins with ethylene(ethenolysis),allows the conversion of sustainable waste biomass to various renewable olefins with much safer,less toxic,sustainable,and zero-CO_(2) emission processes.To our best knowledge,however,a comprehensive summary of key advances in this field(since 2017)is yet to be available,particularly on molecular features of homogeneous and heterogeneous catalysts.This paper presents a critical review on molecular structures of metal complex and oxide catalysts for ethenolysis of olefins and oleochemicals.The influence of cationic centers,coordination conditions,nature of ligands,operating conditions on catalyst performances will be systematically discussed along with relevant reaction mechanism.The key challenges for rational design of coordinated cationic hybrids have been summarized,which will provide insights to technological advancement of large-scale production of oleochemical-derived olefins.展开更多
8wt%WO3/SiO2 metathesis （disproportionation） catalysts with different pore structures were prepared by the incipient-wetness-impregnation method. The as-synthesized catalysts were characterized by N2 adsorpfion-deso...8wt%WO3/SiO2 metathesis （disproportionation） catalysts with different pore structures were prepared by the incipient-wetness-impregnation method. The as-synthesized catalysts were characterized by N2 adsorpfion-desorption, scanning electron microscopy （SEM）, X-ray diffraction （XRD）, UV-visible diffuse reflectance spectroscopy （DRS） and scanning transmission electron microscopy-high-angle annular dark field （STEM HAADF）. The results of STEM HAADF showed that WO3 species were not uniformly distributed on the SiO2 support. The experimental results of 8wt%WO3/SiO2 performance in ethene/decene metathesis revealed that the catalytic effect of 8wt%WO3/SiO2 catalyst and coke formation over it were closely related to the support pore structure： The 8wt%WO3/SiO2 catalyst with a more complicated pore structure showed better catalytic performance but the coke deposition rate was also faster.展开更多
A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride （NDCA, M1） derivatives （M2-M4） with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectromet...A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride （NDCA, M1） derivatives （M2-M4） with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectrometry （MS）. Ring- opening metathesis polymerization （ROMP） of these monomers using the Grubbs third generation catalyst （G3） generated high molecular weight polymers with much improved solubility compared with the NDCA＇s homopolymer. It was found that the solubility of these polymers increased with increased substituent＇s steric hindrance. The living polymerization of NDCA derivative containing the bulkiest substituent （M4） catalyzed by G3 in tetrahydrofuran was confirmed by the kinetic studies with low polydispersity indices （PDI） （〈 1.30）. By using sequential ROMP, well-defined diblock copolymers containing anhydride groups were synthesized.展开更多
The metathesis of ethylene and 2-pentene was studied as an alternative route for propylene production over Re2O7/γ-Al2O3 and Re2O7/SiO2-Al2O3 catalysts. Both NH3 temperature-programmed desorption （NH3-TPD） and H2 t...The metathesis of ethylene and 2-pentene was studied as an alternative route for propylene production over Re2O7/γ-Al2O3 and Re2O7/SiO2-Al2O3 catalysts. Both NH3 temperature-programmed desorption （NH3-TPD） and H2 temperature-programmed reduction （H2-TPR） results showed that Re2O7/SiO2-Al2O3 exhibited stronger acidity and weaker metal-support interaction than Re2O7/γ-Al2O3. At 35 60℃, isomerization free metathesis was observed only over Re2O7/γ-Al2O3, suggesting that the formation of metal-carbene metathesis active sites required only weak acidity. Our results suggest that on the Re2O7/SiO2-Al2O3, hydrido-rhenium species （[Re]-H） were formed in addition to the metathesis active sites, resulting in the isomerization of the initial 1-butene product into 2-butenes. A subsequent secondary metathesis reaction between these 2-butenes and the excess ethylene could explain the enhanced yields of propylene observed. The results demonstrate the potential for high yield of propylene from alternative feedstocks.展开更多
Mesoporous γ-aluminas with large pore size （up to 19 nm, denoted as MAI9） are prepared from dispersed pseudo-boehmite using pluronic P123 as template. It is found that these mesoporous alumina supported rhenium oxi...Mesoporous γ-aluminas with large pore size （up to 19 nm, denoted as MAI9） are prepared from dispersed pseudo-boehmite using pluronic P123 as template. It is found that these mesoporous alumina supported rhenium oxide catalysts were more active and have far longer working life-span in gas-phase metathesis of 1-butene and 2-butene to propene than rhenium oxide on conventional alumina with small pore size （5 nm）. At 60 ℃ and atmospheric pressure with WHSV = 1 h^-1, the similar stable conversions of butene （ca. 55%） for all the 13 wt% Re207/alumina catalysts were obtained near the chemical equilibrium, and the stable working life-spans of Re2OT/MA19 were far longer than that of Re2O7/A1203, being about 70 h and 20 h, respectively.展开更多
Norbornene derivatives exo,endo-2-[2-(3,5-di-tert-butyl-4-hydroxyphenoxy)-acetoxy]methyl-5-norbornene(M1) and 3,3,5,5-tetramethyl-4-piperidinyl 5-norbornene-exo,endo-2-carboxylate(M2)were synthesized and polymerized b...Norbornene derivatives exo,endo-2-[2-(3,5-di-tert-butyl-4-hydroxyphenoxy)-acetoxy]methyl-5-norbornene(M1) and 3,3,5,5-tetramethyl-4-piperidinyl 5-norbornene-exo,endo-2-carboxylate(M2)were synthesized and polymerized by RuCl_2(=CHPh)(PCy_3)_2 to prepare a novel kind of bi-functional polymer bearing sterically hindered phenol(SHP)and hindered amine(HLAS)groups via ring-opening metathesis polymerization(ROMP).The resulting copolymers were characterized by gel permeation chromatography(GPC),~1H-NMR and differen...展开更多
Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2...Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.展开更多
基金financially supported by National Key R&D Program of China(No.2021YFA1501700)CAS Project for Young Scientists in Basic Research(No.YSBR-094)+1 种基金Natural Science Foundation of Anhui Province(Nos.2308085Y35 and 2023AH030002)Hefei Natural Science Foundation(No.202304)。
文摘As a powerful synthetic tool,ruthenium-catalyzed ring-opening metathesis polymerization(ROMP)has been widely utilized to prepare diverse heteroatom-containing polymers.In this contribution,we report the synthesis of the novel imine-based polymer through the copolymerization of cyclooctene with cyclic imine comonomer via ROMP.Because of the efficient hydrolysis reactions of the imine group,the generated copolymer can be easily degraded under mild condition.Moreover,the generated degradable product was the telechelic polymer bearing amine group,which was highly challenged for its direct synthesis.And this telechelic polymer could also be used for the further synthesis of new polymer through post-transformation.The introduction of imine unit in this work provides a new example of the degradable polymer synthesis.
基金supported by the National Natural Science Foundation of China(No.U23B6011)the Jilin Provincial Science and Technology Department Program(No.20230101347JC)。
文摘Mechanochromic polyolefins represent a novel class of functionalized polyolefins,which still remains significant challenges.Pd(II)-catalyzed coordination-insertion copolymerization is a feasible method for achieving this kind of polymers,yet with linear microstructures.Ringopening metathesis polymerization(ROMP)offers another promising avenue for affording functionalized polyolefins.This method exhibits high polar group tolerance and the ability to precisely regulate polymer branches.In this study,we report the method for producing mechanochromic branched polyethylenes via ROMP.By employing the terpolymerization of a well-designed monomer containing the mechanochromic group,NB-ABF,with cyclooctene(COE)and long-chain 5-hexylcyclooctene(COE-C6),following by hydrogenation process,we synthesized a range of functionalized branched polyethylenes characterized by varied branching density and polar monomer incorporation.These polymers bear a structural resemblance to functionalized ethylene-octene copolymers.After crosslinking,mechanochromophores are generated,and mechanochromism is achieved in uniaxial tensile testing.A comprehensive assessment reveals that both the incorporation of polar monomers and variations in branching density significantly influence their mechanical properties.Notably,upon stretching,these materials display pronounced visible color change,confirming the successful development of mechanochromic branched polyethylenes.
基金supported by Council of Scientific and Industrial Research(CSIR),New Delhi
文摘Rare earth ortho-oxomolybdates of composition Ln2/aMoO4 （Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er and Y） were prepared by metathesis reaction. All these materials were characterized by powder X-ray diffraction, Fourier transform-infrared spectroscopy （FT-IR） and UV-Vis diffuse reflectance spectra. The Rietveld analysis of all the samples was carried out to obtain the unit cell parameters and reliability factors. All the materials were crystallized in tetragonal lattice with I41/a space group. The infrared spectra of all the samples were characterized by bands due to MoO42 units. The bandgap energies of all the samples were obtained from UV-Vis DRS spectra. The luminescence spectra of Ln2/3MoO4 （Ln=Pr, Eu and Dy） showed characteristic transitions of the rare earth ions. The visible light photocatalytic activity of all the samples was studied against degradation of methylene blue.
基金the National Natural Science Foundation of China(Grant No.20903088 and 21006104)
文摘Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the catalytic performance results, induction period and objective product were closely related to the reaction conditions. Lower space velocity led to longer induction period and higher propene yield. The optimal reaction temperature for propene production is around 150 ~C and it shifted to 100 ~C for ethene production. 1-Butene auto-metathesis predominated in the reaction network if the support with lower degree of sodium exchanged. And propene gradually became the dominant product upon increasing the support sodium exchange degree. 6Mo/H100Na0M-30A1 catalyst with a support of full sodium exchange degree exhibited the highest propene yield.
文摘A novel route involving self‐metathesis of1‐butene under mild conditions that gave high yields ofethene and hexene was proposed.The results of thermodynamic analysis revealed that the Gibbsenergy of the target Metathesis I reaction(1‐butene?ethene+3‐hexene)was much higher thanthat of the main side Metathesis II(1‐butene+2‐butene?propene+2‐pentene).Suppression of1‐butene double‐bond isomerization was the key step to increase the selectivity for the target olefinin the reaction network.The relationship between the catalytic performance and support nature was investigated in detail.On basis of H2‐TPR,UV‐Vis spectra and HRTEM results,an alumina(Al2O3)support with large surface area was beneficial for the dispersion of molybdenum(Mo)species.Both suitable acidity and sufficient Mo dispersion were important to selectively promote the self‐metathesis reaction of1‐butene.On the optimal6Mo/Al2O3catalyst,1‐butene conversion reached47%and ethene selectivity was as high as42%on the premise of good catalytic stability(80°C,1.0MPa,3h?1).?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.
基金This work was supported by Research Foundation of Key Laboratory of Neutron Physics(Grant No.2015BB03)National Natural Science Foundation of China(Grant Nos.11774247 and 21301122)+2 种基金Science Foundation for Excellent Youth Scholars of Sichuan University(Grant No.2015SCU04A04)Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20130181120116)Premier Research Institution for Ultrahigh-pressure Sciences(PRIUS).
文摘High-pressure solid-state metathesis(HPSSM)reaction is an effective route to novel metal nitrides.A recent advance in HPSSM reactions is presented for a number of examples,including 3d transition metal nitrides(ε-Fe_(3)N,ε-Fe_(3-x)Co_(x)N,CrN,and Co_(4)N_(x)),4d transition metal nitrides(MoNx),and 5d transition metal nitrides(Re_(3)N,WN_(x)).Thermodynamic investigations based on density functional theory(DFT)calculations on several typical HPSSM reactions between metal oxides and boron nitride indicate that the pressure could reduce the reaction enthalpy △H.High-pressure confining environment thermodynamically favors an ion-exchange process between metal atom and boron atom,and successfully results in the formation of well-crystalized metal nitrides with potential applications.
基金partly supported by Grant-in-Aid for Scientific Research on Innovative Areas ("3D Active-Site Science", No. 26105003) from The Ministry of Education, Culture, Sports, Science and Technology (MEXT), JapanGrant-in-Aid for Scientific Research from the Japan Society for the Promotion of Science (JSPS, Nos. 15H03812, 18H01982)the Tokyo Metropolitan government (Tokyo Human Resources Fund for City Diplomacy) for pre-doctoral fellowship
文摘(Imido)vanadium(V)-alkylidene complexes of type V(CHSiMe3)(NR)(OR?)(PMe3)2 [R = Ad, C6H5, 2,6-Me2C6H3, 2,6-Cl2C6H3;R?= 2,6-Me2C6H3, 2,6-i Pr2C6H3, 2,6-F2C6H3, C6F5, C6Cl5] exhibited from moderate to remarkable catalytic activities for ringopening metathesis polymerization(ROMP) of norbornene(NBE). The catalytic activities were affected by the ligand substituents, and V(CHSiMe3)(N-2,6-Cl2C6H3)(OC6X5)(PMe3)2(X = F, Cl) demonstrated the exceptionally high catalytic activities for ROMP of NBE.The complexes polymerized cycloheptene(CHPE) and cis-cyclooctene(COE), and ROMP of COE by the OC6 Cl5 analogue proceeded in a living manner even at 80℃, and the activity increased with increasing the temperature up to 120 ℃. Highly active catalysts for ROMP of cyclic olefins(NBE, cyclopentene, and CHPE) can be generated in situ by premixing isolated V(CHSiMe3)(NC6F5)(O-2,6-iPr2C6H3)(PMe3)2 with 1.0 equiv. of C6F5OH or C6Cl5OH via immediate phenoxy exchange;the activity was affected by the kind of phenol added [TOF in the ROMPs of NBE: 4.62 × 10^4 min^–1(upon addition of C6F5OH) versus 37.3 min^–1(none)].
基金supported by the National Natural Science Foundation of China (No.20773120)National 973 Project of China (No.2005CB221403)
文摘A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomerization of 1-butene to 2-butene and then for the cross-metathesis between 1-butene and 2-butene to propene and 2-pentene. The combination of HY zeolite and Al2O3 is prerequisite for the production of propene. The propene yield keeps increasing with the HY content in the range of 10-70 wt%, where 10WO3/Al2O3-70HY exhibits the highest propene yield. The MS-H2-TPR and MS-O2-TPO characterizations indicate that the increase of HY content in the catalysts weakens the interaction between W species and supports, whereas enhance the probability of coking on the metal species and acid sites.
基金Financial support by National Natural Science Foundation of China (No. 20303019)National 973 Project of China (No.2003CB615802).
文摘Effect of reaction temperature and pressure on the metathesis reaction between ethene and 2-butene to propene was studied on the WO3/γ-Al2O3-HY catalyst. The activity is found to increase with elevated temperature and reaches a plateau at 150-240 ℃. After that, the activity undergoes a remarkable decrement at too high temperature. The effect of temperature is elucidated by the oxidation state of tungsten species. The evaluation results also indicate that the stability is dependent on this reaction parameter. Medium pressure （0.5-0.8 MPa） is favorable for stability, while atmospheric pressure or too high pressure （〉1.0 MPa） deteriorates the stability. For explanation, UV Vis, FT-IR, O2-TPO, and TG techniques are used to characterize the spent catalysts.
基金supported by the National Natural Science Foundation of China (Grant No. 20903088 and 20773120)the Ministry of Science and Technology of China through the National Key Project of Fundamental Research (Grant No.2009CB623507)
文摘A series of 3.0Mo/MCM-22-Al2O3 catalysts with γ-Al2O3 contents in the range of 0-100 wt% were prepared and applied in the metathesis reaction of ethene and butene-2. Addition of γ-Al2O3did not affect the structure of MCM-22 zeolite as evidenced by XRD and N2 adsorption measurements. It was deduced from TPR experiments that γ-Al2O3 phase favored the formation of polymolybdate or multilayered Mo oxide, while more Al2（MoO4）3 species were generated over MCM-22 zeolites. Alumina content in the support was directly related to the metathesis activity of ethene and butene-2 to propene. Mo species with higher valence （Mo6＋or Mo5＋） contributed more to the excellent performance of catalyst than metallic Mo. The best catalyst activity and stability was obtained over 3.0Mo/（MCM-22-30%Al2O3） under the reaction condition of 1.0 MPa and 125℃ using N2 as the pretreatment gas.
基金financially supported by the National Natural Science Foundation of China(No.21364005)Startup Foundation for Outstanding Young Scientists of Inner Mongolia University(Z20080213No.115110)
文摘Herein we reported that ferrocene-containing polymers could be synthesized via acyclic diene metathesis （ADMET） polymerization of ferrocene-containing bis-styryl monomers. The all-trans-configured vinylene bonds of stilbene segment were proven by means of ^13C-NMR, ^1H-NMR, MALDI-TOF mass spectrometry and FTIR. Poly（1） showed maxima for absorption at 320 nm and emission at 430 nm which are structurally very similar to trans-stilbene, but 24 and 16 nm red shifted respectively. CIE chromaticity diagram shows that emission color could be adjusted by controlling the molecular weight. The polymer showed excellent solubility in common organic solvents and good thermal stability evidenced by TGA and DSC. The results of CV suggested the polymer possessed noninteracting metal centers which was confirmed by a reversible one-electron redox wave observed for the polymer.
基金supported by the National Natural Science Foundation of China (Grant No:20976192)SINOPEC Jiujiang Petrochemical Company (G2810-09-ZS-0027)
文摘Macro-mesoporous γ-alumina support（MMA） was prepared by a sol-gel route in aqueous medium using pseudo-boehmite as aluminum source and polystyrene microspheres and Pluronic P123 as hard and soft dual templates,respectively.MMA had a BET specific surface area of about 259 m2 g-1,total pore volume of about 1.61 cm3 g-1,macropore diameter of about 102 nm,and mesopore diameter of about 14 nm.Re2O7/MMA and conventional Re2O7/Al2O3 were prepared by a incipient-wetness impregnation method,and their catalytic performances in the metathesis of 1-butene and 2-butene were tested in a fixed-bed tubular reactor.The result showed that Re2O7/MMA possessed higher activity and far longer working life-span than conventional Re2O7/Al2O3.
基金supported by the National Natural Science Foundation of China(22078365,22008262)Natural Science Foundation of Shandong Province(ZR2020QB187)+3 种基金Postdoctoral Research Funding of Shandong Province(201703016)Qingdao Postdoctoral Research Funding(BY20170210)the Development Fund of State Key Laboratory of Heavy Oil Processing(20CX02204A)new faculty start-up funding from the China University of Petroleum(YJ201601058)。
文摘Terminal olefins are important building blocks for the industry of biofuels,oligomers,and lubricants production.The industrial processes for production of olefins involving oligomerization of ethylene or cracking of petrochemical waxes have several flaws including low yield and high cost in product separation.Cross-metathesis of bio-derived unsaturated fatty esters and olefins with ethylene(ethenolysis),allows the conversion of sustainable waste biomass to various renewable olefins with much safer,less toxic,sustainable,and zero-CO_(2) emission processes.To our best knowledge,however,a comprehensive summary of key advances in this field(since 2017)is yet to be available,particularly on molecular features of homogeneous and heterogeneous catalysts.This paper presents a critical review on molecular structures of metal complex and oxide catalysts for ethenolysis of olefins and oleochemicals.The influence of cationic centers,coordination conditions,nature of ligands,operating conditions on catalyst performances will be systematically discussed along with relevant reaction mechanism.The key challenges for rational design of coordinated cationic hybrids have been summarized,which will provide insights to technological advancement of large-scale production of oleochemical-derived olefins.
文摘8wt%WO3/SiO2 metathesis （disproportionation） catalysts with different pore structures were prepared by the incipient-wetness-impregnation method. The as-synthesized catalysts were characterized by N2 adsorpfion-desorption, scanning electron microscopy （SEM）, X-ray diffraction （XRD）, UV-visible diffuse reflectance spectroscopy （DRS） and scanning transmission electron microscopy-high-angle annular dark field （STEM HAADF）. The results of STEM HAADF showed that WO3 species were not uniformly distributed on the SiO2 support. The experimental results of 8wt%WO3/SiO2 performance in ethene/decene metathesis revealed that the catalytic effect of 8wt%WO3/SiO2 catalyst and coke formation over it were closely related to the support pore structure： The 8wt%WO3/SiO2 catalyst with a more complicated pore structure showed better catalytic performance but the coke deposition rate was also faster.
基金financially supported by the National Natural Science Foundation of China(Nos.21234006 and 21574098)
文摘A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride （NDCA, M1） derivatives （M2-M4） with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectrometry （MS）. Ring- opening metathesis polymerization （ROMP） of these monomers using the Grubbs third generation catalyst （G3） generated high molecular weight polymers with much improved solubility compared with the NDCA＇s homopolymer. It was found that the solubility of these polymers increased with increased substituent＇s steric hindrance. The living polymerization of NDCA derivative containing the bulkiest substituent （M4） catalyzed by G3 in tetrahydrofuran was confirmed by the kinetic studies with low polydispersity indices （PDI） （〈 1.30）. By using sequential ROMP, well-defined diblock copolymers containing anhydride groups were synthesized.
基金supports from the Thailand Research Fund (TRF)the Office of Higher Education Commission
文摘The metathesis of ethylene and 2-pentene was studied as an alternative route for propylene production over Re2O7/γ-Al2O3 and Re2O7/SiO2-Al2O3 catalysts. Both NH3 temperature-programmed desorption （NH3-TPD） and H2 temperature-programmed reduction （H2-TPR） results showed that Re2O7/SiO2-Al2O3 exhibited stronger acidity and weaker metal-support interaction than Re2O7/γ-Al2O3. At 35 60℃, isomerization free metathesis was observed only over Re2O7/γ-Al2O3, suggesting that the formation of metal-carbene metathesis active sites required only weak acidity. Our results suggest that on the Re2O7/SiO2-Al2O3, hydrido-rhenium species （[Re]-H） were formed in addition to the metathesis active sites, resulting in the isomerization of the initial 1-butene product into 2-butenes. A subsequent secondary metathesis reaction between these 2-butenes and the excess ethylene could explain the enhanced yields of propylene observed. The results demonstrate the potential for high yield of propylene from alternative feedstocks.
基金financially supported by SINOPEC Jiujiang Petrochemical Company and from the National Nature Science Foundation of China (No.20976192)
文摘Mesoporous γ-aluminas with large pore size （up to 19 nm, denoted as MAI9） are prepared from dispersed pseudo-boehmite using pluronic P123 as template. It is found that these mesoporous alumina supported rhenium oxide catalysts were more active and have far longer working life-span in gas-phase metathesis of 1-butene and 2-butene to propene than rhenium oxide on conventional alumina with small pore size （5 nm）. At 60 ℃ and atmospheric pressure with WHSV = 1 h^-1, the similar stable conversions of butene （ca. 55%） for all the 13 wt% Re207/alumina catalysts were obtained near the chemical equilibrium, and the stable working life-spans of Re2OT/MA19 were far longer than that of Re2O7/A1203, being about 70 h and 20 h, respectively.
基金Sasakawa Scientific Research Grant from the Japan Science Society.
文摘Norbornene derivatives exo,endo-2-[2-(3,5-di-tert-butyl-4-hydroxyphenoxy)-acetoxy]methyl-5-norbornene(M1) and 3,3,5,5-tetramethyl-4-piperidinyl 5-norbornene-exo,endo-2-carboxylate(M2)were synthesized and polymerized by RuCl_2(=CHPh)(PCy_3)_2 to prepare a novel kind of bi-functional polymer bearing sterically hindered phenol(SHP)and hindered amine(HLAS)groups via ring-opening metathesis polymerization(ROMP).The resulting copolymers were characterized by gel permeation chromatography(GPC),~1H-NMR and differen...
文摘Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.
文摘This paper reviewed some recent advances of ring opening metathesis polymerization (ROMP) in tailoring polymers with novel and controlled structures.
