AIM:To evaluate the differences and consistency of vault measurements obtained by Scheimpflug tomography(Pentacam),anterior segment optical coherence tomography(AS-OCT,CASIA II),and ultrasound biomicroscopy(UBM)follow...AIM:To evaluate the differences and consistency of vault measurements obtained by Scheimpflug tomography(Pentacam),anterior segment optical coherence tomography(AS-OCT,CASIA II),and ultrasound biomicroscopy(UBM)following implantable collamer lens(ICL)V4c implantation.METHODS:Vault measurements were acquired using three modalities:Pentacam,CASIA II AS-OCT,and UBM.Repeated-measures analysis of variance was used to compare the vault values obtained by the three devices.The correlation and consistency of measurements among the three instruments were assessed using the Pearson correlation coefficient,intraclass correlation coefficient(ICC),and Bland-Altman plots.RESULTS:This retrospective study enrolled 210 myopic eyes of 210 patients(158 women and 52 men)who underwent ICL implantation:108 eyes had a myopic ICL V4c implanted,and 102 eyes had a toric ICL V4c implanted.The mean vault values measured by Pentacam,CASIA II,and UBM were 452.64±204.20μm,538.57±203.54μm,and 560.95±227.54μm,respectively,with statistically significant differences among the three groups(P<0.05).Pearson correlation analysis showed strong positive correlations between vault values measured by different instruments(all P<0.001).ICC results indicated good consistency among the three measurement modalities(all P<0.001).Stratified analysis revealed that when the vault value was≤250μm,the correlation and consistency of measurements across the three instruments were lower than those in the medium and high vault subgroups.CONCLUSION:Vault values measured by Pentacam are lower than those obtained by CASIA II and UBM,with UBM yielding the highest mean vault values.Measurements from the three instruments are not interchangeable but can serve as mutual references due to their significant correlation and good overall consistency.Pentacam and CASIA II demonstrate the highest consistency in vault measurement.Notably,when the vault value is≤250μm,the consistency between Pentacam and the other two instruments decreases significantly.展开更多
Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use ...Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use of graphene-based materials in fields like electronics,energy,and composites has resulted in standards for their nomenclature,the measurement of key characteristics,and their specification,etc.Among these,standards for measuring the key characteristics are crucial.The critical parameters are the number of layers,the type and concentration of defects and functional groups,elemental composition,sheet resistance,and carrier mobility.Standards for characterizing these have been analyzed by the International Organization for Standardization Technical Committee in ISO/TC229 and the International Electrotechnical Commission Technical Committee in IEC/TC113.These give details of applicable or preferred samples,the fundamental principles of the techniques,specific precautions,and points for attention in the relevant standards.The pivotal role of the ISO/TC229 and IEC/TC113 standards is considered and challenges and future trends are outlined.展开更多
Single-cell biomechanics and electrophysiology measuring tools have transformed biological research over the last few decades,which enabling a comprehensive and nuanced understanding of cellular behavior and function....Single-cell biomechanics and electrophysiology measuring tools have transformed biological research over the last few decades,which enabling a comprehensive and nuanced understanding of cellular behavior and function.Despite their high-quality information content,these single-cell measuring techniques suffer from laborious manual processing by highly skilled workers and extremely low throughput(tens of cells per day).Recently,numerous researchers have automated the measurement of cell mechanical and electrical signals through robotic localization and control processes.While these efforts have demonstrated promising progress,critical challenges persist,including human dependency,learning complexity,in-situ measurement,and multidimensional signal acquisition.To identify key limitations and highlight emerging opportunities for innovation,in this review,we comprehensively summarize the key steps of robotic technologies in single-cell biomechanics and electrophysiology.We also discussed the prospects and challenges of robotics and automation in biological research.By bridging gaps between engineering,biology,and data science,this work aims to stimulate interdisciplinary research and accelerate the translation of robotic single-cell technologies into practical applications in the life sciences and medical fields.展开更多
Accurate temperature measurement is a crucial step in predicting and managing the aerodynamic heating during Mars entry and Earth reentry.These processes often occur at extremely high temperatures and pose challenges ...Accurate temperature measurement is a crucial step in predicting and managing the aerodynamic heating during Mars entry and Earth reentry.These processes often occur at extremely high temperatures and pose challenges for quantitative measurements.A 1-μs time-resolved laser absorption technique was developed for simultaneous and time-dependent temperature and CO-concentration measurements over 3000-6000 K by adopting the P(0,21)and P(2,15)lines.To achieve quantitative measurement,the line strengths and Ar-broadening parameters were calibrated within 3030-5980 K.A“W”-shaped path-amplified strategy was used to increase the absorption features of the two lines during the calibration process.Validation experiments were conducted at 3040-5970 K to verify the accuracy of the technique.The new technique was then applied for simultaneous and time-resolved temperature and CO-concentration measurements during the CO_(2)dissociation process to further demonstrate the feasibility of the developed technique.The temperature-dependent CO_(2)absorption cross-sections at line centers of the two lines were calibrated within 2040-5870 K.The CO_(2)absorption interferences were quantified and subtracted from the measured laser absorbances.The measured results(referring to temperature and CO concentration)were generally consistent with the predictions from the kinetics mechanisms in the literature,highlighting the applicability of the developed technique for temperature measurements and CO_(2)dissociation studies within the investigated temperature range.展开更多
[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of ...[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.展开更多
Characterized by high accuracy and operational simplicity,oil-film interferometry(OFI)has served as an effective wall-shear stress(WSS)measurement technique over the past decades.It utilizes the monochromatic light in...Characterized by high accuracy and operational simplicity,oil-film interferometry(OFI)has served as an effective wall-shear stress(WSS)measurement technique over the past decades.It utilizes the monochromatic light interference principle to measure the temporal variation of oil-film thickness caused by WSS,and calculates time-averaged WSS based on the variation of interference fringe width.However,small-scale noise,which is caused by defects on the target surface,ambient dust,and local oil-film non-uniformity,contaminates the interference fringe patterns and directly increases the measurement uncertainty.One practical way is to apply denoising methods to improve the accuracy of identifying the centroids of fringes.In the present study,quasi-bivariate variational mode decomposition(QBVMD)is proposed as a self-adaptive denoising method to remove small-scale noise.Since no characteristic information of fringe patterns is required in the QBVMD-based denoising method,it has higher accuracy and lower uncertainty than the conventional OFI denoising methods,which need to pre-set the mask signal or the bandpass frequency,i.e.,cross-correlation or spectral filtering.Thus,it facilitates the automatic identification of time-varying inhomogeneous fringes.Two sets of experiments,i.e.,WSS measurement on either a canonical flat-plate turbulent boundary layer(TBL)or a TBL perturbed by micro vortex generators(MVG),were conducted to validate the applicability of this QBVMD-OFI method.The former experiment shows that the accuracy of QBVMD-OFI is equivalent to near-wall high-resolution particle image velocimetry,and is considerably higher than that of a dual hot-film sensor.As for the latter,QBVMD-OFI provides sufficient spatial resolution to resolve fine WSS structures generated by MVG.展开更多
A new multi-detector array named HALIMA(Hybrid Array for LIfetime MeAsurement)has been developed at Lanzhou for nuclear structure studies in fission.The array comprises eight BGO-shielded High-Purity Germanium detecto...A new multi-detector array named HALIMA(Hybrid Array for LIfetime MeAsurement)has been developed at Lanzhou for nuclear structure studies in fission.The array comprises eight BGO-shielded High-Purity Germanium detectors and twenty fast Ce-doped Lanthanum Bromide[LaBr_(3)(Ce)]detectors shielded with CsI(Tl).HALIMA is further complemented by two ancillary detector systems:fission fragment(FF)detectors and β detectors.This configuration enables precise sub-nanosecond lifetime measurements using the fourfold FF/β-Ge-LaBr_(3)(Ce)-LaBr_(3)(Ce)coincidence technique.The performance and specifications of the detectors,associated electronics,and the data acquisition system are presented in detail.The advantage of FF selectivity is emphasized,which significantly enhances sensitivity to specific fission channels.Using this approach,the lifetimes of the nuclear excited states populated in the spontaneous fission of^(252)Cf were measured,showing good agreement with the established literature values.展开更多
As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing pl...As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.展开更多
In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-pin...In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
The accurate characterization of thermoelectric properties at low temperatures is crucial for the development of high-performance thermoelectric cooling devices. While measurement errors of thermoelectric properties a...The accurate characterization of thermoelectric properties at low temperatures is crucial for the development of high-performance thermoelectric cooling devices. While measurement errors of thermoelectric properties at temperatures above room temperature have been extensively discussed, there is a lack of standard measurement protocols and error analyses for low-temperature transport properties. In this study, we present a measurement system capable of characterizing all three key thermoelectric parameters, i.e., Seebeck coefficient, electrical conductivity, and thermal conductivity, for a single sample across a temperature range of 10 K to 300 K. We investigated six representative commercial Bi_(2)Te_(3)-based samples(three N-type and three P-type). Using an error propagation model, we systematically analyzed the measurement uncertainties of the three intrinsic parameters and the resulting thermoelectric figure of merit. Our findings reveal that measurement uncertainties for both N-type and P-type Bi_(2)Te_(3)-based materials can be effectively maintained below 5% in the temperature range of 40 K to 300 K. However, the uncertainties increase to over 10% at lower temperatures, primarily due to the relatively smaller values of electrical resistivity and Seebeck coefficients in this regime. This work establishes foundational data for Bi_(2)Te_(3)-based thermoelectric materials and provides a framework for broader investigations of advanced low-temperature thermoelectrics.展开更多
BACKGROUND Clinically significant portal hypertension(CSPH)is a crucial prognostic deter-minant for liver-related events(LREs)in patients with compensated viral cir-rhosis.Liver stiffness measurement(LSM)-related mark...BACKGROUND Clinically significant portal hypertension(CSPH)is a crucial prognostic deter-minant for liver-related events(LREs)in patients with compensated viral cir-rhosis.Liver stiffness measurement(LSM)-related markers may help to predict the risk of LREs.AIM To evaluate the value of LSM and its composite biomarkers[LSM-platelet ratio(LPR),LSM-albumin ratio(LAR)]in predicting LREs.METHODS This study retrospectively enrolled compensated viral cirrhosis patients with CSPH.The Cox regression model was employed to examine the prediction of LSM,LPR,and LAR for LREs.The model performance was assessed through receiver operating characteristic,decision curve,and time-dependent area under the curve analysis.The Kaplan-Meier curve was used to evaluate the cumulative incidence of LREs,and further stratified analysis of different LREs was per-formed.RESULTS A total of 598 patients were included,and 319 patients(53.3%)developed LREs during follow-up.Multivariate proportional hazards modeling demonstrated that LSM,LPR,and LAR were independent predictors of LREs.LPR had better performance in predicting LREs than LAR and LSM(area under the curve=0.780,0.727,0.683,respectively,all P<0.05).The cumulative incidence of LREs in the high-risk group were significantly higher than that in the low-risk group(P<0.001).Among the different LREs,LPR was superior to LSM and LAR in predicting liver decompensation,while the difference in predicting hepatocellular carcinoma and liver-related death was relatively small.CONCLUSION LPR is superior to LSM and LAR in predicting LREs in compensated viral cirrhosis patients with CSPH,especially in predicting liver decompensation.展开更多
Coal measures are significant hydrocarbon source rocks and reservoirs in petroliferous basins.Many large gas fields and coalbed methane fields globally are originated from coal-measure source rocks or accumulated in c...Coal measures are significant hydrocarbon source rocks and reservoirs in petroliferous basins.Many large gas fields and coalbed methane fields globally are originated from coal-measure source rocks or accumulated in coal rocks.Inspired by the discovery of shale oil and gas,and guided by“the overall exploration concept of considering coal rock as reservoir”,breakthroughs in the exploration and development of coal-rock gas have been achieved in deep coal seams with favorable preservation conditions,thereby opening up a new development frontier for the unconventional gas in coal-rock reservoirs.Based on the data from exploration and development practices,a systematic study on the accumulation mechanism of coal-rock gas has been conducted.The mechanisms of“three fields”controlling coal-rock gas accumulation are revealed.It is confirmed that the coal-rock gas is different from CBM in accumulation process.The whole petroleum systems in the Carboniferous–Permian transitional facies coal measures of the eastern margin of the Ordos Basin and in the Jurassic continental facies coal measures of the Junggar Basin are characterized,and the key research directions for further developing the whole petroleum system theory of coal measures are proposed.Coal rocks,compared to shale,possess intense hydrocarbon generation potential,strong adsorption capacity,dual-medium reservoir properties,and partial or weak oil and gas self-sealing capacity.Additionally,unlike other unconventional gas such as shale gas and tight gas,coal-rock gas exhibits more complex accumulation characteristics,and its accumulation requires a certain coal-rock play form lithological and structural traps.Coal-rock gas also has the characteristics of conventional fractured gas reservoirs.Compared with the basic theory and model of the whole petroleum system established based on detrital rock formations,coal measures have distinct characteristics and differences in coal-rock reservoirs and source-reservoir coupling.The whole petroleum system of coal measures is composed of various types of coal-measure hydrocarbon plays with coal(and dark shale)in coal measures as source rock and reservoir,and with adjacent tight layers as reservoirs or cap or transport layers.Under the action of source-reservoir coupling,coal-rock gas is accumulated in coal-rock reservoirs with good preservation conditions,tight oil/gas is accumulated in tight layers,conventional oil/gas is accumulated in traps far away from sources,and coalbed methane is accumulated in coal-rock reservoirs damaged by later geological processes.The proposed whole petroleum system of coal measures represents a novel type of whole petroleum system.展开更多
There are various types of natural gas resources in coal measures,making them major targets for natural gas exploration and development in China.In view of the particularity of the whole petroleum system of coal measu...There are various types of natural gas resources in coal measures,making them major targets for natural gas exploration and development in China.In view of the particularity of the whole petroleum system of coal measures and the reservoir-forming evolution of natural gas in coal,this study reveals the formation,enrichment characteristics and distribution laws of coal-rock gas by systematically reviewing the main types and geological characteristics of natural gas in the whole petroleum system of coal measures.First,natural gas in the whole petroleum system of coal measures is divided into two types,conventional gas and unconventional gas,according to its occurrence characteristics and accumulation mechanism,and into six types,distal detrital rock gas,special rock gas,distal/proximal tight sandstone gas,inner-source tight sandstone gas,shale gas,and coal-rock gas,according to its source and reservoir lithology.The natural gas present in coal-rock reservoirs is collectively referred to as coal-rock gas.Existing data indicate significant differences in the geological characteristics of coal-rock gas exploration and development between shallow and deep layers in the same area,with the transition depth boundary generally 1500-2000 m.Based on the current understanding of coal-rock gas and respecting the historical usage conventions of coalbed methane terminology,coal-rock gas can be divided into deep coal-rock gas and shallow coalbed methane according to burial depth.Second,according to the research concept of“full-process reservoir formation”in the theory of the whole petroleum system of coal measures,based on the formation and evolution of typical coal-rock gas reservoirs,coal-rock gas is further divided into four types:primary coal-rock gas,regenerated coal-rock gas,residual coal-rock gas,and bio coal-rock gas.The first two belong to deep coal-rock gas,while the latter two belong to shallow coal-rock gas.Third,research on the coal-rock gas reservoir formation and evolution shows that shallow coal-rock gas is mainly residual coal-rock gas or bio coal-rock gas formed after geological transformation of primary coal-rock gas,with the reservoir characteristics such as low reservoir pressure,low gas saturation,adsorbed gas in dominance,and gas production by drainage and depressurization,while deep coal-rock gas is mainly primary coal-rock gas and regenerated coal-rock gas,with the reservoir characteristics such as high reservoir pressure,high gas saturation,abundant free gas,and no or little water.In particular,the primary coal-rock gas is wide in distribution,large in resource quantity,and good in reservoir quality,making it the most favorable type of coal-rock gas for exploration and development.展开更多
The mulfifractal formalism for single measure is reviewed. Next, a mixed generalized multifractal formalism is introduced which extends the multifractal formalism of a single measure based on generalizations of the Ha...The mulfifractal formalism for single measure is reviewed. Next, a mixed generalized multifractal formalism is introduced which extends the multifractal formalism of a single measure based on generalizations of the Hausdorff and packing measures to a vector of simultaneously many measures. Borel-Cantelli and Large deviations Theorems are extended to higher orders and thus applied for the validity of the new variant of the multifractal formalism for some special cases of multi-doubling type measures.展开更多
A pseudo-cone in ℝ^(n) is a nonempty closed convex set K not containing the origin and such thatλK⊆K for allλ≥1.It is called a C-pseudo-cone if C is its recession cone,where C is a pointed closed convex cone with i...A pseudo-cone in ℝ^(n) is a nonempty closed convex set K not containing the origin and such thatλK⊆K for allλ≥1.It is called a C-pseudo-cone if C is its recession cone,where C is a pointed closed convex cone with interior points.The cone-volume measure of a pseudo-cone can be defined similarly as for convex bodies,but it may be infinite.After proving a necessary condition for cone-volume measures of C-pseudo-cones,we introduce suitable weights for cone-volume measures,yielding finite measures.Then we provide a necessary and sufficient condition for a Borel measure on the unit sphere to be the weighted cone-volume measure of some C-pseudo-cone.展开更多
Real-time and accurate drogue pose measurement during docking is basic and critical for Autonomous Aerial Refueling(AAR).Vision measurement is the best practicable technique,but its measurement accuracy and robustness...Real-time and accurate drogue pose measurement during docking is basic and critical for Autonomous Aerial Refueling(AAR).Vision measurement is the best practicable technique,but its measurement accuracy and robustness are easily affected by limited computing power of airborne equipment,complex aerial scenes and partial occlusion.To address the above challenges,we propose a novel drogue keypoint detection and pose measurement algorithm based on monocular vision,and realize real-time processing on airborne embedded devices.Firstly,a lightweight network is designed with structural re-parameterization to reduce computational cost and improve inference speed.And a sub-pixel level keypoints prediction head and loss functions are adopted to improve keypoint detection accuracy.Secondly,a closed-form solution of drogue pose is computed based on double spatial circles,followed by a nonlinear refinement based on Levenberg-Marquardt optimization.Both virtual simulation and physical simulation experiments have been used to test the proposed method.In the virtual simulation,the mean pixel error of the proposed method is 0.787 pixels,which is significantly superior to that of other methods.In the physical simulation,the mean relative measurement error is 0.788%,and the mean processing time is 13.65 ms on embedded devices.展开更多
In modern industrial design trends featuring with integration,miniaturization,and versatility,there is a growing demand on the utilization of microstructural array devices.The measurement of such microstructural array...In modern industrial design trends featuring with integration,miniaturization,and versatility,there is a growing demand on the utilization of microstructural array devices.The measurement of such microstructural array components often encounters challenges due to the reduced scale and complex structures,either by contact or noncontact optical approaches.Among these microstructural arrays,there are still no optical measurement methods for micro corner-cube reflector arrays.To solve this problem,this study introduces a method for effectively eliminating coherent noise and achieving surface profile reconstruction in interference measurements of microstructural arrays.The proposed denoising method allows the calibration and inverse solving of system errors in the frequency domain by employing standard components with known surface types.This enables the effective compensation of the complex amplitude of non-sample coherent light within the interferometer optical path.The proposed surface reconstruction method enables the profile calculation within the situation that there is complex multi-reflection during the propagation of rays in microstructural arrays.Based on the measurement results,two novel metrics are defined to estimate diffraction errors at array junctions and comprehensive errors across multiple array elements,offering insights into other types of microstructure devices.This research not only addresses challenges of the coherent noise and multi-reflection,but also makes a breakthrough for quantitively optical interference measurement of microstructural array devices.展开更多
The phasor data concentrator placement(PDCP)in wide area measurement systems(WAMS)is an optimization problem in the communication network planning for power grid.Instead of using the traditional integer linear program...The phasor data concentrator placement(PDCP)in wide area measurement systems(WAMS)is an optimization problem in the communication network planning for power grid.Instead of using the traditional integer linear programming(ILP)based modeling and solution schemes that ignore the graph-related features of WAMS,in this work,the PDCP problem is solved through a heuristic graphbased two-phase procedure(TPP):topology partitioning,and phasor data concentrator(PDC)provisioning.Based on the existing minimum k-section algorithms in graph theory,the k-base topology partitioning algorithm is proposed.To improve the performance,the“center-node-last”pre-partitioning algorithm is proposed to give an initial partition before the k-base partitioning algorithm is applied.Then,the PDC provisioning algorithm is proposed to locate PDCs into the decomposed sub-graphs.The proposed TPP was evaluated on five different IEEE benchmark test power systems and the achieved overall communication performance compared to the ILP based schemes show the validity and efficiency of the proposed method.展开更多
基金Supported by the National Natural Science Foundation of China(No.82171095)the Project of Shanghai Science and Technology(No.23XD1400500)the Research Fund of Sichuan Academy of Medical Sciences and Sichuan Provincial People’s Hospital(No.24QNPY049).
文摘AIM:To evaluate the differences and consistency of vault measurements obtained by Scheimpflug tomography(Pentacam),anterior segment optical coherence tomography(AS-OCT,CASIA II),and ultrasound biomicroscopy(UBM)following implantable collamer lens(ICL)V4c implantation.METHODS:Vault measurements were acquired using three modalities:Pentacam,CASIA II AS-OCT,and UBM.Repeated-measures analysis of variance was used to compare the vault values obtained by the three devices.The correlation and consistency of measurements among the three instruments were assessed using the Pearson correlation coefficient,intraclass correlation coefficient(ICC),and Bland-Altman plots.RESULTS:This retrospective study enrolled 210 myopic eyes of 210 patients(158 women and 52 men)who underwent ICL implantation:108 eyes had a myopic ICL V4c implanted,and 102 eyes had a toric ICL V4c implanted.The mean vault values measured by Pentacam,CASIA II,and UBM were 452.64±204.20μm,538.57±203.54μm,and 560.95±227.54μm,respectively,with statistically significant differences among the three groups(P<0.05).Pearson correlation analysis showed strong positive correlations between vault values measured by different instruments(all P<0.001).ICC results indicated good consistency among the three measurement modalities(all P<0.001).Stratified analysis revealed that when the vault value was≤250μm,the correlation and consistency of measurements across the three instruments were lower than those in the medium and high vault subgroups.CONCLUSION:Vault values measured by Pentacam are lower than those obtained by CASIA II and UBM,with UBM yielding the highest mean vault values.Measurements from the three instruments are not interchangeable but can serve as mutual references due to their significant correlation and good overall consistency.Pentacam and CASIA II demonstrate the highest consistency in vault measurement.Notably,when the vault value is≤250μm,the consistency between Pentacam and the other two instruments decreases significantly.
文摘Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use of graphene-based materials in fields like electronics,energy,and composites has resulted in standards for their nomenclature,the measurement of key characteristics,and their specification,etc.Among these,standards for measuring the key characteristics are crucial.The critical parameters are the number of layers,the type and concentration of defects and functional groups,elemental composition,sheet resistance,and carrier mobility.Standards for characterizing these have been analyzed by the International Organization for Standardization Technical Committee in ISO/TC229 and the International Electrotechnical Commission Technical Committee in IEC/TC113.These give details of applicable or preferred samples,the fundamental principles of the techniques,specific precautions,and points for attention in the relevant standards.The pivotal role of the ISO/TC229 and IEC/TC113 standards is considered and challenges and future trends are outlined.
基金the National Natural Science Foundation of China[62525301,62127811,62433019]the New Cornerstone Science Foundation through the XPLORER PRIZEthe financial support by the China Postdoctoral Science Foundation[GZB20240797].
文摘Single-cell biomechanics and electrophysiology measuring tools have transformed biological research over the last few decades,which enabling a comprehensive and nuanced understanding of cellular behavior and function.Despite their high-quality information content,these single-cell measuring techniques suffer from laborious manual processing by highly skilled workers and extremely low throughput(tens of cells per day).Recently,numerous researchers have automated the measurement of cell mechanical and electrical signals through robotic localization and control processes.While these efforts have demonstrated promising progress,critical challenges persist,including human dependency,learning complexity,in-situ measurement,and multidimensional signal acquisition.To identify key limitations and highlight emerging opportunities for innovation,in this review,we comprehensively summarize the key steps of robotic technologies in single-cell biomechanics and electrophysiology.We also discussed the prospects and challenges of robotics and automation in biological research.By bridging gaps between engineering,biology,and data science,this work aims to stimulate interdisciplinary research and accelerate the translation of robotic single-cell technologies into practical applications in the life sciences and medical fields.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0620201)the frontier scientific research program of Deep Space Exploration Laboratory(Grant No.2022-QYKYJH-HXYF-019)the National Natural Science Foundation of China(Grant Nos.12388101,12027801,12402274,and U2430202)。
文摘Accurate temperature measurement is a crucial step in predicting and managing the aerodynamic heating during Mars entry and Earth reentry.These processes often occur at extremely high temperatures and pose challenges for quantitative measurements.A 1-μs time-resolved laser absorption technique was developed for simultaneous and time-dependent temperature and CO-concentration measurements over 3000-6000 K by adopting the P(0,21)and P(2,15)lines.To achieve quantitative measurement,the line strengths and Ar-broadening parameters were calibrated within 3030-5980 K.A“W”-shaped path-amplified strategy was used to increase the absorption features of the two lines during the calibration process.Validation experiments were conducted at 3040-5970 K to verify the accuracy of the technique.The new technique was then applied for simultaneous and time-resolved temperature and CO-concentration measurements during the CO_(2)dissociation process to further demonstrate the feasibility of the developed technique.The temperature-dependent CO_(2)absorption cross-sections at line centers of the two lines were calibrated within 2040-5870 K.The CO_(2)absorption interferences were quantified and subtracted from the measured laser absorbances.The measured results(referring to temperature and CO concentration)were generally consistent with the predictions from the kinetics mechanisms in the literature,highlighting the applicability of the developed technique for temperature measurements and CO_(2)dissociation studies within the investigated temperature range.
文摘[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.
文摘Characterized by high accuracy and operational simplicity,oil-film interferometry(OFI)has served as an effective wall-shear stress(WSS)measurement technique over the past decades.It utilizes the monochromatic light interference principle to measure the temporal variation of oil-film thickness caused by WSS,and calculates time-averaged WSS based on the variation of interference fringe width.However,small-scale noise,which is caused by defects on the target surface,ambient dust,and local oil-film non-uniformity,contaminates the interference fringe patterns and directly increases the measurement uncertainty.One practical way is to apply denoising methods to improve the accuracy of identifying the centroids of fringes.In the present study,quasi-bivariate variational mode decomposition(QBVMD)is proposed as a self-adaptive denoising method to remove small-scale noise.Since no characteristic information of fringe patterns is required in the QBVMD-based denoising method,it has higher accuracy and lower uncertainty than the conventional OFI denoising methods,which need to pre-set the mask signal or the bandpass frequency,i.e.,cross-correlation or spectral filtering.Thus,it facilitates the automatic identification of time-varying inhomogeneous fringes.Two sets of experiments,i.e.,WSS measurement on either a canonical flat-plate turbulent boundary layer(TBL)or a TBL perturbed by micro vortex generators(MVG),were conducted to validate the applicability of this QBVMD-OFI method.The former experiment shows that the accuracy of QBVMD-OFI is equivalent to near-wall high-resolution particle image velocimetry,and is considerably higher than that of a dual hot-film sensor.As for the latter,QBVMD-OFI provides sufficient spatial resolution to resolve fine WSS structures generated by MVG.
基金supported by the National Natural Science Foundation of China(Nos.12275321,12121005,12475129,and 12335009)the Natural Science Foundation of Guangdong Province,China(No.2025A1515012112)+5 种基金the International Atomic Energy Agency Coordinated Research Project F41034(No.28649)the computational resources from Sun Yat-sen University the National Supercomputer Center in Guangzhouthe Open Project of Guangxi Key Laboratory of Nuclear Physics and Nuclear Technology(No.NLK2023-08)the Central Government Guidance Funds for Local Scientific and Technological Development,China(No.Guike ZY22096024)the Guangdong Major Project of Basic and Applied Basic Research(No.2021B0301030006)Young Scientists Fund of the National Natural Science Foundation of China(No.12405144)the National Key Research and Development Program(MOST 2022YFA1602304).
文摘A new multi-detector array named HALIMA(Hybrid Array for LIfetime MeAsurement)has been developed at Lanzhou for nuclear structure studies in fission.The array comprises eight BGO-shielded High-Purity Germanium detectors and twenty fast Ce-doped Lanthanum Bromide[LaBr_(3)(Ce)]detectors shielded with CsI(Tl).HALIMA is further complemented by two ancillary detector systems:fission fragment(FF)detectors and β detectors.This configuration enables precise sub-nanosecond lifetime measurements using the fourfold FF/β-Ge-LaBr_(3)(Ce)-LaBr_(3)(Ce)coincidence technique.The performance and specifications of the detectors,associated electronics,and the data acquisition system are presented in detail.The advantage of FF selectivity is emphasized,which significantly enhances sensitivity to specific fission channels.Using this approach,the lifetimes of the nuclear excited states populated in the spontaneous fission of^(252)Cf were measured,showing good agreement with the established literature values.
基金supported by the Bureau of Frontier Sciences and Basic Research,Chinese Academy of Sciences(Grant No.QYJ-2025-0103)the National Natural Science Foundation of China(Grant Nos.42441834,42241105,42441825,and 42203048)the Key Research Program of the Institute of Geology and Geophysics,Chinese Academy of Sciences(Grant No.IGGCAS-202401).
文摘As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.
基金funded by the National Natural Science Foundation of China,grant number U24A20135Inner Mongolia Natural Science Foundation major project,grant number 2023ZD12+7 种基金Inner Mongolia Autonomous Region key research and development and achievement transformation plan project,grant number 2023YFHH0090Natural Science Foundation of Inner Mongolia,grant number 2022MS05006Inner Mongolia Autonomous Region Talent Development FundUniversity basic research business expenses,grant number 2023RCTD012University basic research business expenses,grant number 2023QNJS075Postgraduate Research Innovation Program and of Inner Mongolia Autonomous Region,grant number KC2024053BUniversity basic research business expenses,grant number 2024YXXS012National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology,grant number GZ2023KF012.
文摘In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金supported by the National Natural Science Foundation of China (Grant No. 52172259)the National Key Research and Development Program of China (Grant Nos. 2021YFA0718700 and 2022YFB3803900)the Fundamental Research Funds for the Inner Mongolia Normal University (Grant No. 2022JBTD008)。
文摘The accurate characterization of thermoelectric properties at low temperatures is crucial for the development of high-performance thermoelectric cooling devices. While measurement errors of thermoelectric properties at temperatures above room temperature have been extensively discussed, there is a lack of standard measurement protocols and error analyses for low-temperature transport properties. In this study, we present a measurement system capable of characterizing all three key thermoelectric parameters, i.e., Seebeck coefficient, electrical conductivity, and thermal conductivity, for a single sample across a temperature range of 10 K to 300 K. We investigated six representative commercial Bi_(2)Te_(3)-based samples(three N-type and three P-type). Using an error propagation model, we systematically analyzed the measurement uncertainties of the three intrinsic parameters and the resulting thermoelectric figure of merit. Our findings reveal that measurement uncertainties for both N-type and P-type Bi_(2)Te_(3)-based materials can be effectively maintained below 5% in the temperature range of 40 K to 300 K. However, the uncertainties increase to over 10% at lower temperatures, primarily due to the relatively smaller values of electrical resistivity and Seebeck coefficients in this regime. This work establishes foundational data for Bi_(2)Te_(3)-based thermoelectric materials and provides a framework for broader investigations of advanced low-temperature thermoelectrics.
基金Supported by the High-Level Chinese Medicine Key Discipline Construction Project,No.zyyzdxk-2023005Capital’s Funds for Health Improvement and Research,No.2024-1-2173+2 种基金National Natural Science Foundation of China,No.82474419 and No.82474426Beijing Municipal Natural Science Foundation,No.7232272Beijing Traditional Chinese Medicine Technology Development Fund Project,No.BJZYZD-2023-12.
文摘BACKGROUND Clinically significant portal hypertension(CSPH)is a crucial prognostic deter-minant for liver-related events(LREs)in patients with compensated viral cir-rhosis.Liver stiffness measurement(LSM)-related markers may help to predict the risk of LREs.AIM To evaluate the value of LSM and its composite biomarkers[LSM-platelet ratio(LPR),LSM-albumin ratio(LAR)]in predicting LREs.METHODS This study retrospectively enrolled compensated viral cirrhosis patients with CSPH.The Cox regression model was employed to examine the prediction of LSM,LPR,and LAR for LREs.The model performance was assessed through receiver operating characteristic,decision curve,and time-dependent area under the curve analysis.The Kaplan-Meier curve was used to evaluate the cumulative incidence of LREs,and further stratified analysis of different LREs was per-formed.RESULTS A total of 598 patients were included,and 319 patients(53.3%)developed LREs during follow-up.Multivariate proportional hazards modeling demonstrated that LSM,LPR,and LAR were independent predictors of LREs.LPR had better performance in predicting LREs than LAR and LSM(area under the curve=0.780,0.727,0.683,respectively,all P<0.05).The cumulative incidence of LREs in the high-risk group were significantly higher than that in the low-risk group(P<0.001).Among the different LREs,LPR was superior to LSM and LAR in predicting liver decompensation,while the difference in predicting hepatocellular carcinoma and liver-related death was relatively small.CONCLUSION LPR is superior to LSM and LAR in predicting LREs in compensated viral cirrhosis patients with CSPH,especially in predicting liver decompensation.
基金Supported by the PetroChina Basic Project(2024DJ23)CNPC Science Research and Technology Development Project(2021DJ0101)。
文摘Coal measures are significant hydrocarbon source rocks and reservoirs in petroliferous basins.Many large gas fields and coalbed methane fields globally are originated from coal-measure source rocks or accumulated in coal rocks.Inspired by the discovery of shale oil and gas,and guided by“the overall exploration concept of considering coal rock as reservoir”,breakthroughs in the exploration and development of coal-rock gas have been achieved in deep coal seams with favorable preservation conditions,thereby opening up a new development frontier for the unconventional gas in coal-rock reservoirs.Based on the data from exploration and development practices,a systematic study on the accumulation mechanism of coal-rock gas has been conducted.The mechanisms of“three fields”controlling coal-rock gas accumulation are revealed.It is confirmed that the coal-rock gas is different from CBM in accumulation process.The whole petroleum systems in the Carboniferous–Permian transitional facies coal measures of the eastern margin of the Ordos Basin and in the Jurassic continental facies coal measures of the Junggar Basin are characterized,and the key research directions for further developing the whole petroleum system theory of coal measures are proposed.Coal rocks,compared to shale,possess intense hydrocarbon generation potential,strong adsorption capacity,dual-medium reservoir properties,and partial or weak oil and gas self-sealing capacity.Additionally,unlike other unconventional gas such as shale gas and tight gas,coal-rock gas exhibits more complex accumulation characteristics,and its accumulation requires a certain coal-rock play form lithological and structural traps.Coal-rock gas also has the characteristics of conventional fractured gas reservoirs.Compared with the basic theory and model of the whole petroleum system established based on detrital rock formations,coal measures have distinct characteristics and differences in coal-rock reservoirs and source-reservoir coupling.The whole petroleum system of coal measures is composed of various types of coal-measure hydrocarbon plays with coal(and dark shale)in coal measures as source rock and reservoir,and with adjacent tight layers as reservoirs or cap or transport layers.Under the action of source-reservoir coupling,coal-rock gas is accumulated in coal-rock reservoirs with good preservation conditions,tight oil/gas is accumulated in tight layers,conventional oil/gas is accumulated in traps far away from sources,and coalbed methane is accumulated in coal-rock reservoirs damaged by later geological processes.The proposed whole petroleum system of coal measures represents a novel type of whole petroleum system.
基金Supported by the National Science and Technology Major Project for New Oil and Gas Exploration and Development(2025ZD1404200)Forward-looking and Fundamental Project of PetroChina Company Limited(2024DJ23)Scientific Research and Technology Development Project of PetroChina Research Institute of Petroleum Exploration&Development(2024vzz).
文摘There are various types of natural gas resources in coal measures,making them major targets for natural gas exploration and development in China.In view of the particularity of the whole petroleum system of coal measures and the reservoir-forming evolution of natural gas in coal,this study reveals the formation,enrichment characteristics and distribution laws of coal-rock gas by systematically reviewing the main types and geological characteristics of natural gas in the whole petroleum system of coal measures.First,natural gas in the whole petroleum system of coal measures is divided into two types,conventional gas and unconventional gas,according to its occurrence characteristics and accumulation mechanism,and into six types,distal detrital rock gas,special rock gas,distal/proximal tight sandstone gas,inner-source tight sandstone gas,shale gas,and coal-rock gas,according to its source and reservoir lithology.The natural gas present in coal-rock reservoirs is collectively referred to as coal-rock gas.Existing data indicate significant differences in the geological characteristics of coal-rock gas exploration and development between shallow and deep layers in the same area,with the transition depth boundary generally 1500-2000 m.Based on the current understanding of coal-rock gas and respecting the historical usage conventions of coalbed methane terminology,coal-rock gas can be divided into deep coal-rock gas and shallow coalbed methane according to burial depth.Second,according to the research concept of“full-process reservoir formation”in the theory of the whole petroleum system of coal measures,based on the formation and evolution of typical coal-rock gas reservoirs,coal-rock gas is further divided into four types:primary coal-rock gas,regenerated coal-rock gas,residual coal-rock gas,and bio coal-rock gas.The first two belong to deep coal-rock gas,while the latter two belong to shallow coal-rock gas.Third,research on the coal-rock gas reservoir formation and evolution shows that shallow coal-rock gas is mainly residual coal-rock gas or bio coal-rock gas formed after geological transformation of primary coal-rock gas,with the reservoir characteristics such as low reservoir pressure,low gas saturation,adsorbed gas in dominance,and gas production by drainage and depressurization,while deep coal-rock gas is mainly primary coal-rock gas and regenerated coal-rock gas,with the reservoir characteristics such as high reservoir pressure,high gas saturation,abundant free gas,and no or little water.In particular,the primary coal-rock gas is wide in distribution,large in resource quantity,and good in reservoir quality,making it the most favorable type of coal-rock gas for exploration and development.
文摘The mulfifractal formalism for single measure is reviewed. Next, a mixed generalized multifractal formalism is introduced which extends the multifractal formalism of a single measure based on generalizations of the Hausdorff and packing measures to a vector of simultaneously many measures. Borel-Cantelli and Large deviations Theorems are extended to higher orders and thus applied for the validity of the new variant of the multifractal formalism for some special cases of multi-doubling type measures.
文摘A pseudo-cone in ℝ^(n) is a nonempty closed convex set K not containing the origin and such thatλK⊆K for allλ≥1.It is called a C-pseudo-cone if C is its recession cone,where C is a pointed closed convex cone with interior points.The cone-volume measure of a pseudo-cone can be defined similarly as for convex bodies,but it may be infinite.After proving a necessary condition for cone-volume measures of C-pseudo-cones,we introduce suitable weights for cone-volume measures,yielding finite measures.Then we provide a necessary and sufficient condition for a Borel measure on the unit sphere to be the weighted cone-volume measure of some C-pseudo-cone.
基金supported by the National Science Fund for Distinguished Young Scholars,China(No.51625501)Aeronautical Science Foundation of China(No.20240046051002)National Natural Science Foundation of China(No.52005028).
文摘Real-time and accurate drogue pose measurement during docking is basic and critical for Autonomous Aerial Refueling(AAR).Vision measurement is the best practicable technique,but its measurement accuracy and robustness are easily affected by limited computing power of airborne equipment,complex aerial scenes and partial occlusion.To address the above challenges,we propose a novel drogue keypoint detection and pose measurement algorithm based on monocular vision,and realize real-time processing on airborne embedded devices.Firstly,a lightweight network is designed with structural re-parameterization to reduce computational cost and improve inference speed.And a sub-pixel level keypoints prediction head and loss functions are adopted to improve keypoint detection accuracy.Secondly,a closed-form solution of drogue pose is computed based on double spatial circles,followed by a nonlinear refinement based on Levenberg-Marquardt optimization.Both virtual simulation and physical simulation experiments have been used to test the proposed method.In the virtual simulation,the mean pixel error of the proposed method is 0.787 pixels,which is significantly superior to that of other methods.In the physical simulation,the mean relative measurement error is 0.788%,and the mean processing time is 13.65 ms on embedded devices.
基金Supported by National Natural Science Foundation of China(Grant Nos.52375414,52075100)Shanghai Science and Technology Committee Innovation Grant of China(Grant No.23ZR1404200).
文摘In modern industrial design trends featuring with integration,miniaturization,and versatility,there is a growing demand on the utilization of microstructural array devices.The measurement of such microstructural array components often encounters challenges due to the reduced scale and complex structures,either by contact or noncontact optical approaches.Among these microstructural arrays,there are still no optical measurement methods for micro corner-cube reflector arrays.To solve this problem,this study introduces a method for effectively eliminating coherent noise and achieving surface profile reconstruction in interference measurements of microstructural arrays.The proposed denoising method allows the calibration and inverse solving of system errors in the frequency domain by employing standard components with known surface types.This enables the effective compensation of the complex amplitude of non-sample coherent light within the interferometer optical path.The proposed surface reconstruction method enables the profile calculation within the situation that there is complex multi-reflection during the propagation of rays in microstructural arrays.Based on the measurement results,two novel metrics are defined to estimate diffraction errors at array junctions and comprehensive errors across multiple array elements,offering insights into other types of microstructure devices.This research not only addresses challenges of the coherent noise and multi-reflection,but also makes a breakthrough for quantitively optical interference measurement of microstructural array devices.
基金supported by the National Key Research and Development Program of China(2023YFB 2906403).
文摘The phasor data concentrator placement(PDCP)in wide area measurement systems(WAMS)is an optimization problem in the communication network planning for power grid.Instead of using the traditional integer linear programming(ILP)based modeling and solution schemes that ignore the graph-related features of WAMS,in this work,the PDCP problem is solved through a heuristic graphbased two-phase procedure(TPP):topology partitioning,and phasor data concentrator(PDC)provisioning.Based on the existing minimum k-section algorithms in graph theory,the k-base topology partitioning algorithm is proposed.To improve the performance,the“center-node-last”pre-partitioning algorithm is proposed to give an initial partition before the k-base partitioning algorithm is applied.Then,the PDC provisioning algorithm is proposed to locate PDCs into the decomposed sub-graphs.The proposed TPP was evaluated on five different IEEE benchmark test power systems and the achieved overall communication performance compared to the ILP based schemes show the validity and efficiency of the proposed method.
