WITHDRAWAL:Zhang,J.J.,Guo,Y.Q.,Qin,Z.Y.,Wei,C.T.,Hu,Q.H.,Vandeginste,V.,Miao,H.Y.,Yao,P.,and Zhang,P.F.,“Predicting Irreducible Water Saturation of Unconventional Reservoirs by Using NMR T2 Spectra:Methods of Morphol...WITHDRAWAL:Zhang,J.J.,Guo,Y.Q.,Qin,Z.Y.,Wei,C.T.,Hu,Q.H.,Vandeginste,V.,Miao,H.Y.,Yao,P.,and Zhang,P.F.,“Predicting Irreducible Water Saturation of Unconventional Reservoirs by Using NMR T2 Spectra:Methods of Morphological Division and Fractal Models”,Acta Geologica Sinica-English Edition(Accepted Article):https://doi.org/10.1111/1755-6724.15094.展开更多
The airborne electromagnetic （AEM） method has a high sampling rate and survey flexibility. However, traditional numerical modeling approaches must use high-resolution physical grids to guarantee modeling accuracy, e...The airborne electromagnetic （AEM） method has a high sampling rate and survey flexibility. However, traditional numerical modeling approaches must use high-resolution physical grids to guarantee modeling accuracy, especially for complex geological structures such as anisotropic earth. This can lead to huge computational costs. To solve this problem, we propose a spectral-element （SE） method for 3D AEM anisotropic modeling, which combines the advantages of spectral and finite-element methods. Thus, the SE method has accuracy as high as that of the spectral method and the ability to model complex geology inherited from the finite-element method. The SE method can improve the modeling accuracy within discrete grids and reduce the dependence of modeling results on the grids. This helps achieve high-accuracy anisotropic AEM modeling. We first introduced a rotating tensor of anisotropic conductivity to Maxwell＇s equations and described the electrical field via SE basis functions based on GLL interpolation polynomials. We used the Galerkin weighted residual method to establish the linear equation system for the SE method, and we took a vertical magnetic dipole as the transmission source for our AEM modeling. We then applied fourth-order SE calculations with coarse physical grids to check the accuracy of our modeling results against a 1D semi-analytical solution for an anisotropic half-space model and verified the high accuracy of the SE. Moreover, we conducted AEM modeling for different anisotropic 3D abnormal bodies using two physical grid scales and three orders of SE to obtain the convergence conditions for different anisotropic abnormal bodies. Finally, we studied the identification of anisotropy for single anisotropic abnormal bodies, anisotropic surrounding rock, and single anisotropic abnormal body embedded in an anisotropic surrounding rock. This approach will play a key role in the inversion and interpretation of AEM data collected in regions with anisotropic geology.展开更多
目的:基于SEER数据库的宫颈癌患者影响因素分析,分析影响宫颈癌预后的相关因素,为宫颈癌患者预后恢复及治疗提供科学参考依据。方法:利用SEER数据库初步筛查宫颈癌相关数据,从中下载所有符合研究的宫颈癌患者的不同病理分型的数据,选用...目的:基于SEER数据库的宫颈癌患者影响因素分析,分析影响宫颈癌预后的相关因素,为宫颈癌患者预后恢复及治疗提供科学参考依据。方法:利用SEER数据库初步筛查宫颈癌相关数据,从中下载所有符合研究的宫颈癌患者的不同病理分型的数据,选用第八期T,N,M分期对数据的T,N,M分期进行整理,标准化,筛选,筛选条件为患者第八期T,N,M分期明确,有符合要求的观察结局,如死亡或存活。通过筛查出的患者的不同病理分型的数据,运用SPSS26.0统计软件进行统计描述,采用Kaplan-Meier法。描绘生存曲线并估计患者的生存率,死亡率。生存时间分布的组间比较采用Log-Rank检验,对分析结果中P α = 0.05,以P Objective: Study on the prognostic risk model of cervical cancer patients based on SEER database, analyze the relevant factors affecting the prognosis of cervical cancer, and provide scientific reference for the prognosis recovery and treatment of cervical cancer patients. Methods: The SEER database was used to preliminarily screen the data related to cervical cancer, download the data of different pathological types of cervical cancer patients in line with the study, and select the eighth stage T, N, M to sort out, standardize and screen the T, N and M stages of the data. The screening conditions were that the eighth stage T, N and M stages of patients were clear, and there were satisfactory observed outcomes, such as death or survival. Through the data of different pathological types of patients screened, spss26 0 statistical software for statistical description, using Kaplan Meier method. Draw the survival curve and estimate the survival rate and mortality of patients. The inter group comparison of survival time distribution adopts log rank test to conduct multi factor Cox analysis on the variables with statistical significance of P α = 0.05, P < 0.05. Result: (1) Kaplan Meier univariate analysis: different pathological stages of T stage, N stage and M stage have an impact on the survival of patients, which is statistically significant (P < 0.05), and can affect the survival of patients to varying degrees. (2) Cox multivariate analysis: T stage, N stage and M stage were independent prognostic factors affecting the survival time of patients. Conclusion: Different T, N and M pathological stages of different cervical cancer patients can affect the prognosis of cervical cancer patients to varying degrees. They have a significant impact on the mortality and survival rate of cervical cancer patients, and can provide relevant basis for the development and improvement of the treatment scheme of cervical cancer.展开更多
The objective of the present study was to examine the effect of different weaning methods on the ruminal methanogenic archaea composition and diversity in Holstein calves.Thirty-six newborn Holstein bull calves were a...The objective of the present study was to examine the effect of different weaning methods on the ruminal methanogenic archaea composition and diversity in Holstein calves.Thirty-six newborn Holstein bull calves were assigned to 1 of 3 treatments:(1)conventional weaning(d 56)and fed a high proportion of solid feed(CWS);(2)conventional weaning(d 56)and fed a high proportion of liquid feed(CWL);(3)early weaning(d 42)and fed with a high proportion of solid feed(EWS).High-throughput sequencing of the methyl coenzyme M reductase(mcr A)gene,which encodes theα-subunit of methyl coenzyme M reductase-the enzyme that catalyzes the final step in methanogenesis was used to determine the composition and diversity of rumen methanogens.No significant difference(P>0.05)was observed for operational taxonomic units(OTUs)or richness indices,but diversity indices increased(P<0.05)for calves fed high dietary solids.Predominant families across the three treatments were Methanobacteriaceae,Thermoplasmataceae and Methanomassiliicoccaceae.Calves in the EWS treatment had a higher(P<0.05)relative abundance of Methanobrevibacter sp.strain AbM4 and Methanosphaera stadtmanae,while calves in the CWL treatment had a higher(P<0.05)abundance of Methanosphaera sp.strain SM9.A positive(P<0.05)relationship was identified between butyrate and Methanobrevibacter sp.strain AbM4.In conclusion,the composition and diversity of methanogens in the rumen of Holstein calves varied under the different weaning methods.This study identified a positive relationship between butyrate and Methanobrevibacter sp.strain AbM4,potentially reflecting correlations between ruminal fermentation variables and methanogenesis function.These in-depth analyses provide further understanding of weaning methods for intensified production systems.展开更多
The europium ions doped MMoO4 （M=Sr, Ba） nanophosphors were successfully synthesized via a facile hydrothermal method using isopropanol. The relationship between phosphor crystalline phase, morphology, photohtminesc...The europium ions doped MMoO4 （M=Sr, Ba） nanophosphors were successfully synthesized via a facile hydrothermal method using isopropanol. The relationship between phosphor crystalline phase, morphology, photohtminescent properties and hexadecyl trimethyl ammonium bromide （CTAB） concentration, pH value in precursor solution was investigated. The results indi- cated that the morphology and photoluminescent properties were strongly influenced by CTAB concentration and pH value in precursor solution. In SrMoO4：Eu3＋ hosts, the phosphor surface tended to become smoother as the concentration of CTAB was increased; while particles tended to agglomerate as increasing pH value. The relative intensity ratio of charge transfer band to Eu3＋ characteristic emission peaks of MMoO4：Eu3＋ （M=Sr, Ba） was changed as CTAB concentration and pH value changed. The emission spectra of MMoO4：Eu3＋ （M=Sr, Ba） could be adjusted by CTAB concentration and pH value due to their impacts on the structure. It was im- portant that the different morphologies and photoluminescent properties of MMoO4：Eu3＋ （M=Sr, Ba） could be obtained by the facile hydrothermal method and modulated by changing CTAB concentration and pH value.展开更多
Based on the method of reverberation ray matrix（MRRM）, a reverberation matrix for planar framed structures composed of anisotropic Timoshenko（T） beam members containing completely hinged joints is developed for st...Based on the method of reverberation ray matrix（MRRM）, a reverberation matrix for planar framed structures composed of anisotropic Timoshenko（T） beam members containing completely hinged joints is developed for static analysis of such structures.In the MRRM for dynamic analysis, amplitudes of arriving and departing waves for joints are chosen as unknown quantities. However, for the present case of static analysis, displacements and rotational angles at the ends of each beam member are directly considered as unknown quantities. The expressions for stiffness matrices for anisotropic beam members are developed. A corresponding reverberation matrix is derived analytically for exact and unified determination on the displacements and internal forces at both ends of each member and arbitrary cross sectional locations in the structure. Numerical examples are given and compared with the finite element method（FEM） results to validate the present model. The characteristic parameter analysis is performed to demonstrate accuracy of the present model with the T beam theory in contrast with errors in the usual model based on the Euler-Bernoulli（EB） beam theory. The resulting reverberation matrix can be used for exact calculation of anisotropic framed structures as well as for parameter analysis of geometrical and material properties of the framed structures.展开更多
Determination of Fe^(2+)/Fe^(3+)ratios from metallogenic belts to explore controlling physical and chemical conditions of rock formation is of great significance.In order to explore magnetite Fe^(2+)/Fe^(3+)ratios of ...Determination of Fe^(2+)/Fe^(3+)ratios from metallogenic belts to explore controlling physical and chemical conditions of rock formation is of great significance.In order to explore magnetite Fe^(2+)/Fe^(3+)ratios of the Qimantag metallogenic belt,part of the Eastern Kunlun orogenic belt in the northeastern margin of the Qinghai–Tibetan plateau,western Central Orogenic Belt of China,and overcome the limitation of the traditional electronic probe,five different measurement methods are proposed and their respective advantages and disadvantages evaluated,with the composition data of the magnetite obtained using electron probe microanalysis(EPMA).The direct oxygen measurement method has a significant impact on the determination results of FeO and Fe2O3,but the accuracy and uniformity of the results are low.The valence method(Flank method)based on the spectral intensity ratio of Lαto Lβfor iron is also unreliable for FeO and Fe_(2)O^(3)measurements because it is difficult to establish a relationship between Lβ/Lα,the spectral intensity ratio,and the Fe^(2+)/Fe^(3+)content ratio.In comparison,the charge difference method,the surplus-oxygen method and the Mössbauer spectrum method are still the most favorable.Mössbauer spectroscopy,with its isomer movement particularly sensitive to the oxidation state of iron,yields results closer to 0.5,which is relatively reliable.Earlier magnetite deposits are located in intrusions or contact zones and formed by magmatic fluids with high Fe2+/Fe3+ratios,whereas later magnetite deposits are farther away from intrusions and have low Fe^(2+)/Fe^(3+)ratios.The transformation mechanism of hematite and magnetite in the Qimantage metallogenic belt is also studied.No large volume changes,such as pore filling and shrinkage fracture,were detected in the metallogenic belt,and the transformation mechanism is more similar to a reoxidation and reduction mechanism.展开更多
Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribut...Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.展开更多
A water rocket is a rocket system that obtains thrust by injecting water with compressed air of up to about 8 atmospheres. It is usually manufactured using a pressure-resistant PET bottle. The mechanical elements and ...A water rocket is a rocket system that obtains thrust by injecting water with compressed air of up to about 8 atmospheres. It is usually manufactured using a pressure-resistant PET bottle. The mechanical elements and principles contained in the water rocket have much in common with the actual small rocket system, and are suitable as educational and research teaching materials in the field of mechanics. Especially in the field of disaster prevention and mitigation, the use of water rockets is being researched and developed as a rescue tool in the event of a flood or earthquake as a disaster countermeasure. However, since the water rocket is a flying object based on the mechanical principle, it is important to ensure the accuracy and stability of the flight path. In this paper, a mechanical simulator is developed with a numerical calculation program based on the mechanical consideration of water rocket flight performance. In addition, the correlation between the flight distance obtained in the simulation and the estimated flight distance is analyzed by applying a multivariate analysis method and verifying the validity of the flight distance calculated from the result. Based on the verification results, we will apply a statistical optimization method to approach the optimization of flight stability performance conditions for water rockets.展开更多
To make the quantitative results of nuclear magnetic resonance(NMR) transverse relaxation(T;) spectrums reflect the type and pore structure of reservoir more directly, an unsupervised clustering method was developed t...To make the quantitative results of nuclear magnetic resonance(NMR) transverse relaxation(T;) spectrums reflect the type and pore structure of reservoir more directly, an unsupervised clustering method was developed to obtain the quantitative pore structure information from the NMR T;spectrums based on the Gaussian mixture model(GMM). Firstly, We conducted the principal component analysis on T;spectrums in order to reduce the dimension data and the dependence of the original variables. Secondly, the dimension-reduced data was fitted using the GMM probability density function, and the model parameters and optimal clustering numbers were obtained according to the expectation-maximization algorithm and the change of the Akaike information criterion. Finally, the T;spectrum features and pore structure types of different clustering groups were analyzed and compared with T;geometric mean and T;arithmetic mean. The effectiveness of the algorithm has been verified by numerical simulation and field NMR logging data. The research shows that the clustering results based on GMM method have good correlations with the shape and distribution of the T;spectrum, pore structure, and petroleum productivity, providing a new means for quantitative identification of pore structure, reservoir grading, and oil and gas productivity evaluation.展开更多
This paper praidrs a theurvtheal hasts for establishing the congergente of paraled interative and itratiee techaigues,for computing nmtrfied solution of Ar three A is a singal M-matrix,These results do not assuine A t...This paper praidrs a theurvtheal hasts for establishing the congergente of paraled interative and itratiee techaigues,for computing nmtrfied solution of Ar three A is a singal M-matrix,These results do not assuine A to irreducihle,A concrete relaxed parallet multixpla ting algorithin culled the parallel multispliting AOR algarithm is showed Findly,numericales amples are givep,arhleh show effertielve of parallel iterurise methods for singalar展开更多
Several preconditioners are proposed for improving the convergence rate of the iterative method derived from splitting. In this paper, the comparison theorem of preconditioned iterative method for regular splitting is...Several preconditioners are proposed for improving the convergence rate of the iterative method derived from splitting. In this paper, the comparison theorem of preconditioned iterative method for regular splitting is proved. And the convergence and comparison theorem for any preconditioner are indicated. This comparison theorem indicates the possibility of finding new preconditioner and splitting. The purpose of this paper is to show that the preconditioned iterative method yields a new splitting satisfying the regular or weak regular splitting. And new combination preconditioners are proposed. In order to denote the validity of the comparison theorem, some numerical examples are shown.展开更多
In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is...In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is obtained based on an a priori choice of the regularization parameter. Our analysis is not based on the sequential continuity of the normalized duality mapping.展开更多
文摘WITHDRAWAL:Zhang,J.J.,Guo,Y.Q.,Qin,Z.Y.,Wei,C.T.,Hu,Q.H.,Vandeginste,V.,Miao,H.Y.,Yao,P.,and Zhang,P.F.,“Predicting Irreducible Water Saturation of Unconventional Reservoirs by Using NMR T2 Spectra:Methods of Morphological Division and Fractal Models”,Acta Geologica Sinica-English Edition(Accepted Article):https://doi.org/10.1111/1755-6724.15094.
基金financially supported by the Key Program of National Natural Science Foundation of China(No.41530320)China Natural Science Foundation for Young Scientists(No.41404093)+1 种基金Key National Research Project of China(Nos2016YFC0303100 and 2017YFC0601900)China Natural Science Foundation(No.41774125)
文摘The airborne electromagnetic （AEM） method has a high sampling rate and survey flexibility. However, traditional numerical modeling approaches must use high-resolution physical grids to guarantee modeling accuracy, especially for complex geological structures such as anisotropic earth. This can lead to huge computational costs. To solve this problem, we propose a spectral-element （SE） method for 3D AEM anisotropic modeling, which combines the advantages of spectral and finite-element methods. Thus, the SE method has accuracy as high as that of the spectral method and the ability to model complex geology inherited from the finite-element method. The SE method can improve the modeling accuracy within discrete grids and reduce the dependence of modeling results on the grids. This helps achieve high-accuracy anisotropic AEM modeling. We first introduced a rotating tensor of anisotropic conductivity to Maxwell＇s equations and described the electrical field via SE basis functions based on GLL interpolation polynomials. We used the Galerkin weighted residual method to establish the linear equation system for the SE method, and we took a vertical magnetic dipole as the transmission source for our AEM modeling. We then applied fourth-order SE calculations with coarse physical grids to check the accuracy of our modeling results against a 1D semi-analytical solution for an anisotropic half-space model and verified the high accuracy of the SE. Moreover, we conducted AEM modeling for different anisotropic 3D abnormal bodies using two physical grid scales and three orders of SE to obtain the convergence conditions for different anisotropic abnormal bodies. Finally, we studied the identification of anisotropy for single anisotropic abnormal bodies, anisotropic surrounding rock, and single anisotropic abnormal body embedded in an anisotropic surrounding rock. This approach will play a key role in the inversion and interpretation of AEM data collected in regions with anisotropic geology.
文摘目的:基于SEER数据库的宫颈癌患者影响因素分析,分析影响宫颈癌预后的相关因素,为宫颈癌患者预后恢复及治疗提供科学参考依据。方法:利用SEER数据库初步筛查宫颈癌相关数据,从中下载所有符合研究的宫颈癌患者的不同病理分型的数据,选用第八期T,N,M分期对数据的T,N,M分期进行整理,标准化,筛选,筛选条件为患者第八期T,N,M分期明确,有符合要求的观察结局,如死亡或存活。通过筛查出的患者的不同病理分型的数据,运用SPSS26.0统计软件进行统计描述,采用Kaplan-Meier法。描绘生存曲线并估计患者的生存率,死亡率。生存时间分布的组间比较采用Log-Rank检验,对分析结果中P α = 0.05,以P Objective: Study on the prognostic risk model of cervical cancer patients based on SEER database, analyze the relevant factors affecting the prognosis of cervical cancer, and provide scientific reference for the prognosis recovery and treatment of cervical cancer patients. Methods: The SEER database was used to preliminarily screen the data related to cervical cancer, download the data of different pathological types of cervical cancer patients in line with the study, and select the eighth stage T, N, M to sort out, standardize and screen the T, N and M stages of the data. The screening conditions were that the eighth stage T, N and M stages of patients were clear, and there were satisfactory observed outcomes, such as death or survival. Through the data of different pathological types of patients screened, spss26 0 statistical software for statistical description, using Kaplan Meier method. Draw the survival curve and estimate the survival rate and mortality of patients. The inter group comparison of survival time distribution adopts log rank test to conduct multi factor Cox analysis on the variables with statistical significance of P α = 0.05, P < 0.05. Result: (1) Kaplan Meier univariate analysis: different pathological stages of T stage, N stage and M stage have an impact on the survival of patients, which is statistically significant (P < 0.05), and can affect the survival of patients to varying degrees. (2) Cox multivariate analysis: T stage, N stage and M stage were independent prognostic factors affecting the survival time of patients. Conclusion: Different T, N and M pathological stages of different cervical cancer patients can affect the prognosis of cervical cancer patients to varying degrees. They have a significant impact on the mortality and survival rate of cervical cancer patients, and can provide relevant basis for the development and improvement of the treatment scheme of cervical cancer.
基金supported by the Key Program for International S&T Cooperation Projects of China(2016YFE0109000)the National Key R&D Program of China(2017YFF0211702)+1 种基金the National Natural Science Foundation of China(41475126 and 31802085)the Young Scientist Lifting Project,China(2017–2019)
文摘The objective of the present study was to examine the effect of different weaning methods on the ruminal methanogenic archaea composition and diversity in Holstein calves.Thirty-six newborn Holstein bull calves were assigned to 1 of 3 treatments:(1)conventional weaning(d 56)and fed a high proportion of solid feed(CWS);(2)conventional weaning(d 56)and fed a high proportion of liquid feed(CWL);(3)early weaning(d 42)and fed with a high proportion of solid feed(EWS).High-throughput sequencing of the methyl coenzyme M reductase(mcr A)gene,which encodes theα-subunit of methyl coenzyme M reductase-the enzyme that catalyzes the final step in methanogenesis was used to determine the composition and diversity of rumen methanogens.No significant difference(P>0.05)was observed for operational taxonomic units(OTUs)or richness indices,but diversity indices increased(P<0.05)for calves fed high dietary solids.Predominant families across the three treatments were Methanobacteriaceae,Thermoplasmataceae and Methanomassiliicoccaceae.Calves in the EWS treatment had a higher(P<0.05)relative abundance of Methanobrevibacter sp.strain AbM4 and Methanosphaera stadtmanae,while calves in the CWL treatment had a higher(P<0.05)abundance of Methanosphaera sp.strain SM9.A positive(P<0.05)relationship was identified between butyrate and Methanobrevibacter sp.strain AbM4.In conclusion,the composition and diversity of methanogens in the rumen of Holstein calves varied under the different weaning methods.This study identified a positive relationship between butyrate and Methanobrevibacter sp.strain AbM4,potentially reflecting correlations between ruminal fermentation variables and methanogenesis function.These in-depth analyses provide further understanding of weaning methods for intensified production systems.
基金Project supported by the Nation Natural Science Foundation of China(51562025)Graduate Student Innovation Special Funds(YC2016-S085)
文摘The europium ions doped MMoO4 （M=Sr, Ba） nanophosphors were successfully synthesized via a facile hydrothermal method using isopropanol. The relationship between phosphor crystalline phase, morphology, photohtminescent properties and hexadecyl trimethyl ammonium bromide （CTAB） concentration, pH value in precursor solution was investigated. The results indi- cated that the morphology and photoluminescent properties were strongly influenced by CTAB concentration and pH value in precursor solution. In SrMoO4：Eu3＋ hosts, the phosphor surface tended to become smoother as the concentration of CTAB was increased; while particles tended to agglomerate as increasing pH value. The relative intensity ratio of charge transfer band to Eu3＋ characteristic emission peaks of MMoO4：Eu3＋ （M=Sr, Ba） was changed as CTAB concentration and pH value changed. The emission spectra of MMoO4：Eu3＋ （M=Sr, Ba） could be adjusted by CTAB concentration and pH value due to their impacts on the structure. It was im- portant that the different morphologies and photoluminescent properties of MMoO4：Eu3＋ （M=Sr, Ba） could be obtained by the facile hydrothermal method and modulated by changing CTAB concentration and pH value.
基金Project supported by the Program for New Century Excellent Talents in Universities(NCET)by the Ministry of Education of China(No.NCET-04-0373)
文摘Based on the method of reverberation ray matrix（MRRM）, a reverberation matrix for planar framed structures composed of anisotropic Timoshenko（T） beam members containing completely hinged joints is developed for static analysis of such structures.In the MRRM for dynamic analysis, amplitudes of arriving and departing waves for joints are chosen as unknown quantities. However, for the present case of static analysis, displacements and rotational angles at the ends of each beam member are directly considered as unknown quantities. The expressions for stiffness matrices for anisotropic beam members are developed. A corresponding reverberation matrix is derived analytically for exact and unified determination on the displacements and internal forces at both ends of each member and arbitrary cross sectional locations in the structure. Numerical examples are given and compared with the finite element method（FEM） results to validate the present model. The characteristic parameter analysis is performed to demonstrate accuracy of the present model with the T beam theory in contrast with errors in the usual model based on the Euler-Bernoulli（EB） beam theory. The resulting reverberation matrix can be used for exact calculation of anisotropic framed structures as well as for parameter analysis of geometrical and material properties of the framed structures.
基金obtained grants from the National Key Research and Development Program Project"Enhanced Bioremediation Technology and Equipment for Chromium Residuation Site",the Scientific Research Project of Hunan Provincial Department of Education(Grant No.19C1178)the Construction Program for the First-Class Disciplines(Geography)of Hunan Province,China.The anonymous reviewers and editors are thanked for constructive suggestions on improving the quality of the manuscript.
文摘Determination of Fe^(2+)/Fe^(3+)ratios from metallogenic belts to explore controlling physical and chemical conditions of rock formation is of great significance.In order to explore magnetite Fe^(2+)/Fe^(3+)ratios of the Qimantag metallogenic belt,part of the Eastern Kunlun orogenic belt in the northeastern margin of the Qinghai–Tibetan plateau,western Central Orogenic Belt of China,and overcome the limitation of the traditional electronic probe,five different measurement methods are proposed and their respective advantages and disadvantages evaluated,with the composition data of the magnetite obtained using electron probe microanalysis(EPMA).The direct oxygen measurement method has a significant impact on the determination results of FeO and Fe2O3,but the accuracy and uniformity of the results are low.The valence method(Flank method)based on the spectral intensity ratio of Lαto Lβfor iron is also unreliable for FeO and Fe_(2)O^(3)measurements because it is difficult to establish a relationship between Lβ/Lα,the spectral intensity ratio,and the Fe^(2+)/Fe^(3+)content ratio.In comparison,the charge difference method,the surplus-oxygen method and the Mössbauer spectrum method are still the most favorable.Mössbauer spectroscopy,with its isomer movement particularly sensitive to the oxidation state of iron,yields results closer to 0.5,which is relatively reliable.Earlier magnetite deposits are located in intrusions or contact zones and formed by magmatic fluids with high Fe2+/Fe3+ratios,whereas later magnetite deposits are farther away from intrusions and have low Fe^(2+)/Fe^(3+)ratios.The transformation mechanism of hematite and magnetite in the Qimantage metallogenic belt is also studied.No large volume changes,such as pore filling and shrinkage fracture,were detected in the metallogenic belt,and the transformation mechanism is more similar to a reoxidation and reduction mechanism.
基金Supported by the China National Science and Technology Major Project(2016ZX05050)
文摘Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.
文摘A water rocket is a rocket system that obtains thrust by injecting water with compressed air of up to about 8 atmospheres. It is usually manufactured using a pressure-resistant PET bottle. The mechanical elements and principles contained in the water rocket have much in common with the actual small rocket system, and are suitable as educational and research teaching materials in the field of mechanics. Especially in the field of disaster prevention and mitigation, the use of water rockets is being researched and developed as a rescue tool in the event of a flood or earthquake as a disaster countermeasure. However, since the water rocket is a flying object based on the mechanical principle, it is important to ensure the accuracy and stability of the flight path. In this paper, a mechanical simulator is developed with a numerical calculation program based on the mechanical consideration of water rocket flight performance. In addition, the correlation between the flight distance obtained in the simulation and the estimated flight distance is analyzed by applying a multivariate analysis method and verifying the validity of the flight distance calculated from the result. Based on the verification results, we will apply a statistical optimization method to approach the optimization of flight stability performance conditions for water rockets.
基金Supported by the National Natural Science Foundation of China (42174142)National Science and Technology Major Project (2017ZX05039-002)+2 种基金Operation Fund of China National Petroleum Corporation Logging Key Laboratory (2021DQ20210107-11)Fundamental Research Funds for Central Universities (19CX02006A)Major Science and Technology Project of China National Petroleum Corporation (ZD2019-183-006)。
文摘To make the quantitative results of nuclear magnetic resonance(NMR) transverse relaxation(T;) spectrums reflect the type and pore structure of reservoir more directly, an unsupervised clustering method was developed to obtain the quantitative pore structure information from the NMR T;spectrums based on the Gaussian mixture model(GMM). Firstly, We conducted the principal component analysis on T;spectrums in order to reduce the dimension data and the dependence of the original variables. Secondly, the dimension-reduced data was fitted using the GMM probability density function, and the model parameters and optimal clustering numbers were obtained according to the expectation-maximization algorithm and the change of the Akaike information criterion. Finally, the T;spectrum features and pore structure types of different clustering groups were analyzed and compared with T;geometric mean and T;arithmetic mean. The effectiveness of the algorithm has been verified by numerical simulation and field NMR logging data. The research shows that the clustering results based on GMM method have good correlations with the shape and distribution of the T;spectrum, pore structure, and petroleum productivity, providing a new means for quantitative identification of pore structure, reservoir grading, and oil and gas productivity evaluation.
文摘This paper praidrs a theurvtheal hasts for establishing the congergente of paraled interative and itratiee techaigues,for computing nmtrfied solution of Ar three A is a singal M-matrix,These results do not assuine A to irreducihle,A concrete relaxed parallet multixpla ting algorithin culled the parallel multispliting AOR algarithm is showed Findly,numericales amples are givep,arhleh show effertielve of parallel iterurise methods for singalar
文摘Several preconditioners are proposed for improving the convergence rate of the iterative method derived from splitting. In this paper, the comparison theorem of preconditioned iterative method for regular splitting is proved. And the convergence and comparison theorem for any preconditioner are indicated. This comparison theorem indicates the possibility of finding new preconditioner and splitting. The purpose of this paper is to show that the preconditioned iterative method yields a new splitting satisfying the regular or weak regular splitting. And new combination preconditioners are proposed. In order to denote the validity of the comparison theorem, some numerical examples are shown.
文摘In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is obtained based on an a priori choice of the regularization parameter. Our analysis is not based on the sequential continuity of the normalized duality mapping.
