Power consumption is the bottleneck of system performance. Power reduction has become an important issue in digital circuit design, especially for high performance portable devices (such as cell phones, PDAs, etc.). M...Power consumption is the bottleneck of system performance. Power reduction has become an important issue in digital circuit design, especially for high performance portable devices (such as cell phones, PDAs, etc.). Many power reduction techniques have also been proposed from the system level down to the circuit level. High-speed computation has thus become the expected norm from the average user, instead of being the province of the few with access to a powerful mainframe. Power must be added to the portable unit, even when power is available in non-portable applications, the issue of low-power design is becoming critical. Thus, it is evident that methodologies for the design of high-throughput, low-power digital systems are needed. Techniques for low-power operation are shown in this paper, which use the lowest possible supply voltage coupled with architectural, logic style, circuit, and technology optimizations. The threshold vol-tages of the MTCMOS devices for both low and high Vth are constructed as the low threshold Vth is approximately 150 - 200 mv whereas the high threshold Vth is managed by varying the thickness of the oxide Tox. Hence we are using different threshold voltages with minimum voltages and hence considered this project as ultra-low power designing.展开更多
A novel clock structure of a low-power 16-bit very large instruction word (VLIW) digital signal processor (DSP) was proposed. To improve deterministic clock gating and to solve the drawback of conventional clock gatin...A novel clock structure of a low-power 16-bit very large instruction word (VLIW) digital signal processor (DSP) was proposed. To improve deterministic clock gating and to solve the drawback of conventional clock gating circuit in high speed circuit, a distributed and early clock gating method was developed on its instruction fetch & decoder unit, its pipelined data-path unit and its super-Harvard memory interface unit. The core was implemented following the Synopsys back-end flow under TSMC (Taiwan Silicon manufacture corporation) 0.18-μm 1.8-V 1P6M process, with a core size of 2 mm×2 mm. Result shows that it can run under 200 MHz with a power performance around 0.3 mW/MIPS. Meanwhile, only 39.7% circuit is active simultaneously in average, compared to its non-gating counterparts.展开更多
This paper describes the implementation of a data logger for the real-time in-situ monitoring of hydrothermal systems. A compact mechanical structure ensures the security and reliability of data logger when used under...This paper describes the implementation of a data logger for the real-time in-situ monitoring of hydrothermal systems. A compact mechanical structure ensures the security and reliability of data logger when used under deep sea. The data logger is a battery powered instrument, which can connect chemical sensors （pH electrode, H2S electrode, H2 electrode） and temperature sensors. In order to achieve major energy savings, dynamic power management is implemented in hardware design and software design. The working current of the data logger in idle mode and active mode is 15 μA and 1.44 mA respectively, which greatly extends the working time of battery. The data logger has been successftdly tested in the first Sino-American Cooperative Deep Submergence Project from August 13 to September 3, 2005.展开更多
A test pattern generator （TPG） which can highly reduce the peak power consumption during built-in self-test （BIST） application is proposed. The proposed TPG, called LPpe-TPG, consists of a linear feedback shift re...A test pattern generator （TPG） which can highly reduce the peak power consumption during built-in self-test （BIST） application is proposed. The proposed TPG, called LPpe-TPG, consists of a linear feedback shift register （LFSR） and some control circuits. A procedure is presented firstly to make compare vectors between pseudorandom test patterns by adding some circuits to the original LFSR and secondly to insert some vectors between two successive pseudorandom test patterns according to the ordinal selection of every two bits of the compare vector. Then the changes between any successive test patterns of the test set generated by the LPpe-TPG are not more than twice. This leads to a decrease of the weighted switching activity （WSA） of the circuit under test （CUT） and therefore a reduction of the power consumption. Experimental results based on some ISCAS＇ 85 benchmark circuits show that the peak power consumption has been reduced by 25.25% to 64.46%. Also, the effectiveness of our approach to reduce the total and average power consumption is kept, without losing stuck-at fault coverage.展开更多
A low-power-consumption 9bit 10MS/s pipeline ADC,used in a CMOS image sensor,is proposed. In the design, the decrease of power consumption is achieved by applying low-power-consumption and large-output-swing amplifier...A low-power-consumption 9bit 10MS/s pipeline ADC,used in a CMOS image sensor,is proposed. In the design, the decrease of power consumption is achieved by applying low-power-consumption and large-output-swing amplifiers with gain boost structure, and biasing all the cells with the same voltage bias source, which requires careful layout design and large capacitors. In addition,capacitor array DAC is also applied to reduce power consumption,and low threshold voltage MOS transistors are used to achieve a large signal processing range. The ADC was implemented in a 0.18μm 4M-1 P CMOS process,and the experimental results indicate that it consumes only 7mW, which is much less than general pipeline ADCs. The ADC was used in a 300000 pixels CMOS image sensor.展开更多
With the rapid development of integrated circuits [1], low power consumption has become a constant pursuiting goal of the designer in chip design. As the memory almost takes up the area of the chip, reducing memory po...With the rapid development of integrated circuits [1], low power consumption has become a constant pursuiting goal of the designer in chip design. As the memory almost takes up the area of the chip, reducing memory power consumption will significantly reduce the overall power consumption of the chip;according to ISSCC’s 2014 report about technology trends discussions, there two points of the super-low power SRAM design: 1) design a more effective static and dynamic power control circuit for each key module of SRAM;2) ensure that in the case of the very low VDD min, SRAM can operating reliably and stably. This paper makes full use reliable of 8T cell, and the single-port sense amplifier has solved problems in the traditional 8T cell structure, making the new structure of the memory at a greater depth still maintain good performance and lower power consumption. Compared with the designed SRAM the SRAM generated by commercial compiler, as the performance loss at SS corner does not exceed 10%, the whole power consumption could be reduced by 54.2%, which can achieve a very good effect of low-power design.展开更多
Designing low power sensor networks has been the general goal of design engineers, scientist and end users. It is desired to have a wireless sensor network (WSN) that will run on little power (if possible, none at all...Designing low power sensor networks has been the general goal of design engineers, scientist and end users. It is desired to have a wireless sensor network (WSN) that will run on little power (if possible, none at all) thereby saving cost, and the inconveniences of having to replace batteries in some difficult to access areas of usage. Previous researches on WSN energy models have focused less on the aggregate transceiver energy consumption models as compared to studies on other components of the node, hence a large portion of energy in a WSN still get depleted through data transmission. By studying the energy consumption map of the transceiver of a WSN node in different states and within state transitions, we propose in this paper the energy consumption model of the transceiver unit of a typical sensor node and the transceiver design parameters that significantly influences this energy consumption. The contribution of this paper is an innovative energy consumption model based on simple finite automata which reveals the relationship between the aggregate energy consumption and important power parameters that characterize the energy consumption map of the transceiver in a WSN;an ideal tool to design low power WSN.展开更多
A kind of pseudo Gray code presentation of test patterns based on accumulation generators is presented and a low power test scheme is proposed to test computational function modules with contiguous subspace in very la...A kind of pseudo Gray code presentation of test patterns based on accumulation generators is presented and a low power test scheme is proposed to test computational function modules with contiguous subspace in very large scale integration （VLSI）, especially in digital signal processors （DSP）. If test patterns from accumulators for the modules are encoded in the pseudo Gray code presentation, the switching activities of the modules are reduced, and the decrease of the test power consumption is resulted in. Results of experimentation based on FPGA show that the test approach can reduce dynamic power consumption by an average of 17.40% for 8-bit ripple carry adder consisting of 3-2 counters. Then implementation of the low power test in hardware is exploited. Because of the reuse of adders, introduction of additional XOR logic gates is avoided successfully. The design minimizes additional hardware overhead for test and needs no adjustment of circuit structure. The low power test can detect any combinational stuck-at fault within the basic building block without any degradation of original circuit performance.展开更多
The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power...The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.展开更多
Based on analyzing significance of controlling clock in design of low power sequential circuits, this paper proposes a technique that the gating signal is derived from the master latch in a flip-flop to make the deriv...Based on analyzing significance of controlling clock in design of low power sequential circuits, this paper proposes a technique that the gating signal is derived from the master latch in a flip-flop to make the derived clock having no glitch and no skew. The design of a decimal counter with half-frequency division shows that by using the synchronous derived clock the counter has lower power dissipation as well as simpler combinational logic. Computer simulation shows 20% power saving.展开更多
In order to eliminate the energy waste caused by the traditional static hardware multithreaded processor used in real-time embedded system working in the low workload situation, the energy efficiency of the hardware m...In order to eliminate the energy waste caused by the traditional static hardware multithreaded processor used in real-time embedded system working in the low workload situation, the energy efficiency of the hardware multithread is discussed and a novel dynamic multithreaded architecture is proposed. The proposed architecture saves the energy wasted by removing idle threads without manipulation on the original architecture, fulfills a seamless switching mechanism which protects active threads and avoids pipeline stall during power mode switching. The report of an implemented dynamic multithreaded processor with 45 nm process from synthesis tool indicates that the area of dynamic multithreaded architecture is only 2.27% higher than the static one in achieving dynamic power dissipation, and consumes 1.3% more power in the same peak performance.展开更多
Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their ...Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their programs, the large power consumption required in accessing an NV memory has become a major problem. This problem becomes critical when the power supply voltage of NV microcontrollers is decreased. We can solve this problem by introducing an instruction cache, thus reducing the access frequency of the NV memory. Unlike general-purpose microprocessors, microcontrollers used for real-time applications in embedded systems must accurately calculate program execution time prior to its execution. Therefore, we introduce a “transparent” instruction cache, which does not change the existing NV microcontroller’s cycle-level execution time, for reducing power and energy consumption, but not for improving the processing speed. We have conducted detailed microar chitecture design based on the architecture of a major industrial microcontroller, and we evaluated power and energy consumption for several benchmark programs. Our evaluation shows that the proposed instruction cache can successfully reduce energy consumption in a fairly wide range of practical NV microcontroller configurations.展开更多
文摘Power consumption is the bottleneck of system performance. Power reduction has become an important issue in digital circuit design, especially for high performance portable devices (such as cell phones, PDAs, etc.). Many power reduction techniques have also been proposed from the system level down to the circuit level. High-speed computation has thus become the expected norm from the average user, instead of being the province of the few with access to a powerful mainframe. Power must be added to the portable unit, even when power is available in non-portable applications, the issue of low-power design is becoming critical. Thus, it is evident that methodologies for the design of high-throughput, low-power digital systems are needed. Techniques for low-power operation are shown in this paper, which use the lowest possible supply voltage coupled with architectural, logic style, circuit, and technology optimizations. The threshold vol-tages of the MTCMOS devices for both low and high Vth are constructed as the low threshold Vth is approximately 150 - 200 mv whereas the high threshold Vth is managed by varying the thickness of the oxide Tox. Hence we are using different threshold voltages with minimum voltages and hence considered this project as ultra-low power designing.
基金The Research Project of China Military Department (No6130325)
文摘A novel clock structure of a low-power 16-bit very large instruction word (VLIW) digital signal processor (DSP) was proposed. To improve deterministic clock gating and to solve the drawback of conventional clock gating circuit in high speed circuit, a distributed and early clock gating method was developed on its instruction fetch & decoder unit, its pipelined data-path unit and its super-Harvard memory interface unit. The core was implemented following the Synopsys back-end flow under TSMC (Taiwan Silicon manufacture corporation) 0.18-μm 1.8-V 1P6M process, with a core size of 2 mm×2 mm. Result shows that it can run under 200 MHz with a power performance around 0.3 mW/MIPS. Meanwhile, only 39.7% circuit is active simultaneously in average, compared to its non-gating counterparts.
基金supported by the International Cooperative Key Project(Grant No.2004DFA04900)Ministry of Sciences and Technology of PRC,and the National Natural Science Foundation of China (Grant Nos.40637037 and 50675198)
文摘This paper describes the implementation of a data logger for the real-time in-situ monitoring of hydrothermal systems. A compact mechanical structure ensures the security and reliability of data logger when used under deep sea. The data logger is a battery powered instrument, which can connect chemical sensors （pH electrode, H2S electrode, H2 electrode） and temperature sensors. In order to achieve major energy savings, dynamic power management is implemented in hardware design and software design. The working current of the data logger in idle mode and active mode is 15 μA and 1.44 mA respectively, which greatly extends the working time of battery. The data logger has been successftdly tested in the first Sino-American Cooperative Deep Submergence Project from August 13 to September 3, 2005.
文摘A test pattern generator （TPG） which can highly reduce the peak power consumption during built-in self-test （BIST） application is proposed. The proposed TPG, called LPpe-TPG, consists of a linear feedback shift register （LFSR） and some control circuits. A procedure is presented firstly to make compare vectors between pseudorandom test patterns by adding some circuits to the original LFSR and secondly to insert some vectors between two successive pseudorandom test patterns according to the ordinal selection of every two bits of the compare vector. Then the changes between any successive test patterns of the test set generated by the LPpe-TPG are not more than twice. This leads to a decrease of the weighted switching activity （WSA） of the circuit under test （CUT） and therefore a reduction of the power consumption. Experimental results based on some ISCAS＇ 85 benchmark circuits show that the peak power consumption has been reduced by 25.25% to 64.46%. Also, the effectiveness of our approach to reduce the total and average power consumption is kept, without losing stuck-at fault coverage.
文摘A low-power-consumption 9bit 10MS/s pipeline ADC,used in a CMOS image sensor,is proposed. In the design, the decrease of power consumption is achieved by applying low-power-consumption and large-output-swing amplifiers with gain boost structure, and biasing all the cells with the same voltage bias source, which requires careful layout design and large capacitors. In addition,capacitor array DAC is also applied to reduce power consumption,and low threshold voltage MOS transistors are used to achieve a large signal processing range. The ADC was implemented in a 0.18μm 4M-1 P CMOS process,and the experimental results indicate that it consumes only 7mW, which is much less than general pipeline ADCs. The ADC was used in a 300000 pixels CMOS image sensor.
文摘With the rapid development of integrated circuits [1], low power consumption has become a constant pursuiting goal of the designer in chip design. As the memory almost takes up the area of the chip, reducing memory power consumption will significantly reduce the overall power consumption of the chip;according to ISSCC’s 2014 report about technology trends discussions, there two points of the super-low power SRAM design: 1) design a more effective static and dynamic power control circuit for each key module of SRAM;2) ensure that in the case of the very low VDD min, SRAM can operating reliably and stably. This paper makes full use reliable of 8T cell, and the single-port sense amplifier has solved problems in the traditional 8T cell structure, making the new structure of the memory at a greater depth still maintain good performance and lower power consumption. Compared with the designed SRAM the SRAM generated by commercial compiler, as the performance loss at SS corner does not exceed 10%, the whole power consumption could be reduced by 54.2%, which can achieve a very good effect of low-power design.
文摘Designing low power sensor networks has been the general goal of design engineers, scientist and end users. It is desired to have a wireless sensor network (WSN) that will run on little power (if possible, none at all) thereby saving cost, and the inconveniences of having to replace batteries in some difficult to access areas of usage. Previous researches on WSN energy models have focused less on the aggregate transceiver energy consumption models as compared to studies on other components of the node, hence a large portion of energy in a WSN still get depleted through data transmission. By studying the energy consumption map of the transceiver of a WSN node in different states and within state transitions, we propose in this paper the energy consumption model of the transceiver unit of a typical sensor node and the transceiver design parameters that significantly influences this energy consumption. The contribution of this paper is an innovative energy consumption model based on simple finite automata which reveals the relationship between the aggregate energy consumption and important power parameters that characterize the energy consumption map of the transceiver in a WSN;an ideal tool to design low power WSN.
基金supported by the National Natural Science Foundation of China under Grant No.90407007University Science Foundation of China under Grant No R0820207
文摘A kind of pseudo Gray code presentation of test patterns based on accumulation generators is presented and a low power test scheme is proposed to test computational function modules with contiguous subspace in very large scale integration （VLSI）, especially in digital signal processors （DSP）. If test patterns from accumulators for the modules are encoded in the pseudo Gray code presentation, the switching activities of the modules are reduced, and the decrease of the test power consumption is resulted in. Results of experimentation based on FPGA show that the test approach can reduce dynamic power consumption by an average of 17.40% for 8-bit ripple carry adder consisting of 3-2 counters. Then implementation of the low power test in hardware is exploited. Because of the reuse of adders, introduction of additional XOR logic gates is avoided successfully. The design minimizes additional hardware overhead for test and needs no adjustment of circuit structure. The low power test can detect any combinational stuck-at fault within the basic building block without any degradation of original circuit performance.
基金supported in part by the National Natural Science Foundation of China(No.61306027)
文摘The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.
基金Supported by the NSF of China (# 69773034) and DARPA under contract # F33615-95-C-1627
文摘Based on analyzing significance of controlling clock in design of low power sequential circuits, this paper proposes a technique that the gating signal is derived from the master latch in a flip-flop to make the derived clock having no glitch and no skew. The design of a decimal counter with half-frequency division shows that by using the synchronous derived clock the counter has lower power dissipation as well as simpler combinational logic. Computer simulation shows 20% power saving.
基金supported partially by the National High Technical Research and Development Program of China (863 Program) under Grants No. 2011AA040101, No. 2008AA01Z134the National Natural Science Foundation of China under Grants No. 61003251, No. 61172049, No. 61173150+2 种基金the Doctoral Fund of Ministry of Education of China under Grant No. 20100006110015Beijing Municipal Natural Science Foundation under Grant No. Z111100054011078the 2012 Ladder Plan Project of Beijing Key Laboratory of Knowledge Engineering for Materials Science under Grant No. Z121101002812005
文摘In order to eliminate the energy waste caused by the traditional static hardware multithreaded processor used in real-time embedded system working in the low workload situation, the energy efficiency of the hardware multithread is discussed and a novel dynamic multithreaded architecture is proposed. The proposed architecture saves the energy wasted by removing idle threads without manipulation on the original architecture, fulfills a seamless switching mechanism which protects active threads and avoids pipeline stall during power mode switching. The report of an implemented dynamic multithreaded processor with 45 nm process from synthesis tool indicates that the area of dynamic multithreaded architecture is only 2.27% higher than the static one in achieving dynamic power dissipation, and consumes 1.3% more power in the same peak performance.
文摘Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their programs, the large power consumption required in accessing an NV memory has become a major problem. This problem becomes critical when the power supply voltage of NV microcontrollers is decreased. We can solve this problem by introducing an instruction cache, thus reducing the access frequency of the NV memory. Unlike general-purpose microprocessors, microcontrollers used for real-time applications in embedded systems must accurately calculate program execution time prior to its execution. Therefore, we introduce a “transparent” instruction cache, which does not change the existing NV microcontroller’s cycle-level execution time, for reducing power and energy consumption, but not for improving the processing speed. We have conducted detailed microar chitecture design based on the architecture of a major industrial microcontroller, and we evaluated power and energy consumption for several benchmark programs. Our evaluation shows that the proposed instruction cache can successfully reduce energy consumption in a fairly wide range of practical NV microcontroller configurations.
