This study presents a simplified numerical approach for evaluating the thermal performance of louvered fin and flat tube heat exchangers(LFFTHXs),which are critical in many thermal management applications but difficul...This study presents a simplified numerical approach for evaluating the thermal performance of louvered fin and flat tube heat exchangers(LFFTHXs),which are critical in many thermal management applications but difficult to model due to their complex geometries.The proposed method uses an equivalent convective heat transfer coefficient to represent the fins,significantly reducing the computational requirements of the simulations.Validation against the effectiveness-number of transfer units method showed average deviations of 4.4%for the novel louvered fin with two combined holes and 9.5%for conventional configurations,confirming the accuracy of the method.Further application to two-phase refrigerant scenarios using experimental data demonstrated the robustness of the method and its suitability for practical design and optimization of LFFTHXs.The approach not only improves the feasibility of thermal analysis in industrial applications but also provides a foundation for future research into more efficient heat exchanger designs.展开更多
FSince 250 years ago i.e. when industrial revolution made human extract and exploit non-renewable energy sources rapidly, dependence on these energy sources has increased. Despite the important role of these sources o...FSince 250 years ago i.e. when industrial revolution made human extract and exploit non-renewable energy sources rapidly, dependence on these energy sources has increased. Despite the important role of these sources of energy in mankind progress, their destructive impacts on human life should be considered and traditional environment saving methods have been proposed again. In the old ages, buildings were constructed corresponding to their climate and environment. However, after emergence of modern architecture, everything changed environmental elements which made life beautiful, like wind, sunlight and rain and dependence on mechanical ventilation systems increased rapidly. Therefore, it is clear that traditional solutions should also be changed along with modern considerations, just as traditional louvers have been replaced by modern solar louvers. This study deals with an important ventilation element i.e. traditional louver in warm and arid areas and the way it has been changed and applied in contemporary buildings.展开更多
In the realm of technological market penetration of solar photovoltaic louvers(PVL)addressing environmental difficulties and the industrial revolution,a new avenue of renewable energy is introduced.Moreover,solar ener...In the realm of technological market penetration of solar photovoltaic louvers(PVL)addressing environmental difficulties and the industrial revolution,a new avenue of renewable energy is introduced.Moreover,solar energy exploitation through building façades was addressed through motorized solar photovoltaic louvers(MPVL).On the other hand,proponents exalted the benefits of MPVL overlooking the typical analyses.In this communication,we attempted to perform a thorough industrial system evaluation of the MPVL.This communication presents a methodology to validate the industrial claims about MPVL devices and their economic efficiency and the insight on how geographical location influences their utilization and augment their potential benefits.This task is carried out by evaluating the extent of solar energy that can be harvested using solar photovoltaic system(PVSYST)software and investigating whether existing product claims are associated with MPVL are feasible in different locations.The performance and operational losses(temperature,internal network,power electronics)were evaluated.To design and assess the performance of different configurations based on the geographical analogy,simulation tools were successfully carried out based on different topographical locations.Based on these findings,various factors affect the employment of MPVL such as geographical and weather conditions,solar irradiation,and installation efficiency.tt is assumed that we successfully shed light and provided insights into the complexity associated with MPVL.展开更多
A 2-D laminar flow model was established for CFD analysis of air-flow between louvered fins. Two louvered fins are studied based on commercial software FLUENT. Air-flow pressure drop characteristics are derived on the...A 2-D laminar flow model was established for CFD analysis of air-flow between louvered fins. Two louvered fins are studied based on commercial software FLUENT. Air-flow pressure drop characteristics are derived on the calculation of Reynolds number from 75.3 to 600. The numerical results are in good agreement with the experimental data when Reynolds is lower.展开更多
Seoul has good weather settings for incorporating renewable energies, hence, given its small land area living mode was mostly set in an apartment condition it is an ideal place for building applied photovoltaic (BAPV)...Seoul has good weather settings for incorporating renewable energies, hence, given its small land area living mode was mostly set in an apartment condition it is an ideal place for building applied photovoltaic (BAPV) for solar energy harvesting. On the other hand, the BAPV energy self-consumption hasn’t been thoroughly examined considering the overall energy consumption requirement. Therefore, presented in this communication are the viability of PVL to produce electricity from solar energy and insights on modulating and improving energy harvesting efficiency. To accomplish this objective, three major factors were considered: 1) the photovoltaic (PV) positioning;2) the solar tracking scenario;and 3) the mechanistic system energy consumption. The overall louver energy generation was thoroughly scrutinized from the net energy conception of the BAPV up to the mechanistic module energy expenditure. This work intends to provide insights into the economic feasibility of BAPV assessing its technological profitability in the specified location and building size.展开更多
A micro thermal control device with polyimide based micro louver was proposed.The device structure was designed,the actuation voltage was analyzed theoretically and fabrication process was described.The micro louver p...A micro thermal control device with polyimide based micro louver was proposed.The device structure was designed,the actuation voltage was analyzed theoretically and fabrication process was described.The micro louver prototype was fabricated using UV laser micromachining,electrochemistry etch and magnetron sputtering deposition technologies.The main parameters were tested and results were presented.展开更多
In this paper,a novel composite heat transfer enhancement technique comprised of louvered fins(LFs)and rectangular wing vortex generators(RWVGs)is proposed to improve the LF side thermal-hydraulic performance of louve...In this paper,a novel composite heat transfer enhancement technique comprised of louvered fins(LFs)and rectangular wing vortex generators(RWVGs)is proposed to improve the LF side thermal-hydraulic performance of louvered fin and flat tube heat exchangers(LFHEs).After validation of the LF side pressure dropΔP and heat transfer coefficient hLFof the baseline by experiments,the numerical method is applied to investigate the influential mechanisms of the RWVG parameters(the number N(7 to 15),attack angleβ(30°to 90°),height H_(VG)(0.8 mm to 2 mm)and width W_(VG)(0.8 mm to 1.2 mm))on the performance of the LFHE in the velocity range of 3 m/s to 10 m/s.Results show that thermal-hydraulic performance of the LFHE is significantly impacted by the RWVGs,and according to the performance evaluation criteria(PEC),the LFHE achieves its optimal thermal-hydraulic performance when N=7,β=45°,H_(VG)=1.8 mm and W_(VG)=1 mm.Compared to the baseline,the maximum,minimum and average increments of PEC for the optimal case are 13.85%,4.67%and 8.39%,respectively.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12272345).
文摘This study presents a simplified numerical approach for evaluating the thermal performance of louvered fin and flat tube heat exchangers(LFFTHXs),which are critical in many thermal management applications but difficult to model due to their complex geometries.The proposed method uses an equivalent convective heat transfer coefficient to represent the fins,significantly reducing the computational requirements of the simulations.Validation against the effectiveness-number of transfer units method showed average deviations of 4.4%for the novel louvered fin with two combined holes and 9.5%for conventional configurations,confirming the accuracy of the method.Further application to two-phase refrigerant scenarios using experimental data demonstrated the robustness of the method and its suitability for practical design and optimization of LFFTHXs.The approach not only improves the feasibility of thermal analysis in industrial applications but also provides a foundation for future research into more efficient heat exchanger designs.
文摘FSince 250 years ago i.e. when industrial revolution made human extract and exploit non-renewable energy sources rapidly, dependence on these energy sources has increased. Despite the important role of these sources of energy in mankind progress, their destructive impacts on human life should be considered and traditional environment saving methods have been proposed again. In the old ages, buildings were constructed corresponding to their climate and environment. However, after emergence of modern architecture, everything changed environmental elements which made life beautiful, like wind, sunlight and rain and dependence on mechanical ventilation systems increased rapidly. Therefore, it is clear that traditional solutions should also be changed along with modern considerations, just as traditional louvers have been replaced by modern solar louvers. This study deals with an important ventilation element i.e. traditional louver in warm and arid areas and the way it has been changed and applied in contemporary buildings.
文摘In the realm of technological market penetration of solar photovoltaic louvers(PVL)addressing environmental difficulties and the industrial revolution,a new avenue of renewable energy is introduced.Moreover,solar energy exploitation through building façades was addressed through motorized solar photovoltaic louvers(MPVL).On the other hand,proponents exalted the benefits of MPVL overlooking the typical analyses.In this communication,we attempted to perform a thorough industrial system evaluation of the MPVL.This communication presents a methodology to validate the industrial claims about MPVL devices and their economic efficiency and the insight on how geographical location influences their utilization and augment their potential benefits.This task is carried out by evaluating the extent of solar energy that can be harvested using solar photovoltaic system(PVSYST)software and investigating whether existing product claims are associated with MPVL are feasible in different locations.The performance and operational losses(temperature,internal network,power electronics)were evaluated.To design and assess the performance of different configurations based on the geographical analogy,simulation tools were successfully carried out based on different topographical locations.Based on these findings,various factors affect the employment of MPVL such as geographical and weather conditions,solar irradiation,and installation efficiency.tt is assumed that we successfully shed light and provided insights into the complexity associated with MPVL.
文摘A 2-D laminar flow model was established for CFD analysis of air-flow between louvered fins. Two louvered fins are studied based on commercial software FLUENT. Air-flow pressure drop characteristics are derived on the calculation of Reynolds number from 75.3 to 600. The numerical results are in good agreement with the experimental data when Reynolds is lower.
文摘Seoul has good weather settings for incorporating renewable energies, hence, given its small land area living mode was mostly set in an apartment condition it is an ideal place for building applied photovoltaic (BAPV) for solar energy harvesting. On the other hand, the BAPV energy self-consumption hasn’t been thoroughly examined considering the overall energy consumption requirement. Therefore, presented in this communication are the viability of PVL to produce electricity from solar energy and insights on modulating and improving energy harvesting efficiency. To accomplish this objective, three major factors were considered: 1) the photovoltaic (PV) positioning;2) the solar tracking scenario;and 3) the mechanistic system energy consumption. The overall louver energy generation was thoroughly scrutinized from the net energy conception of the BAPV up to the mechanistic module energy expenditure. This work intends to provide insights into the economic feasibility of BAPV assessing its technological profitability in the specified location and building size.
文摘A micro thermal control device with polyimide based micro louver was proposed.The device structure was designed,the actuation voltage was analyzed theoretically and fabrication process was described.The micro louver prototype was fabricated using UV laser micromachining,electrochemistry etch and magnetron sputtering deposition technologies.The main parameters were tested and results were presented.
基金supported by the National Natural Science Foundation of China(51875238)。
文摘In this paper,a novel composite heat transfer enhancement technique comprised of louvered fins(LFs)and rectangular wing vortex generators(RWVGs)is proposed to improve the LF side thermal-hydraulic performance of louvered fin and flat tube heat exchangers(LFHEs).After validation of the LF side pressure dropΔP and heat transfer coefficient hLFof the baseline by experiments,the numerical method is applied to investigate the influential mechanisms of the RWVG parameters(the number N(7 to 15),attack angleβ(30°to 90°),height H_(VG)(0.8 mm to 2 mm)and width W_(VG)(0.8 mm to 1.2 mm))on the performance of the LFHE in the velocity range of 3 m/s to 10 m/s.Results show that thermal-hydraulic performance of the LFHE is significantly impacted by the RWVGs,and according to the performance evaluation criteria(PEC),the LFHE achieves its optimal thermal-hydraulic performance when N=7,β=45°,H_(VG)=1.8 mm and W_(VG)=1 mm.Compared to the baseline,the maximum,minimum and average increments of PEC for the optimal case are 13.85%,4.67%and 8.39%,respectively.
