Phase change materials(PCMs)have attracted much attention in the field of solar thermal utilization recently,due to their outstanding thermal energy storage performance.However,PCMs usually release their stored latent...Phase change materials(PCMs)have attracted much attention in the field of solar thermal utilization recently,due to their outstanding thermal energy storage performance.However,PCMs usually release their stored latent heat spontaneously as the temperature below the phase transition temperature,rendering thermal energy storage and release uncontrollable,thus hindering their practical application in time and space.Herein,we developed erythritol/sodium carboxymethylcellulose/tetrasodium ethylenediaminetetraacetate(ERY/CMC/EDTA-4Na)composite PCMs with novel spatiotemporal thermal energy storage properties,defined as spatiotemporal PCMs(STPCMs),which exhibit the capacity of thermal energy long-term storage and controllable release.Our results show that the composite PCMs are unable to lose latent heat due to spontaneous crystallization during cooling,but can controllably release thermal energy through cold crystallization during reheating.The cold-crystallization temperature and enthalpy of composite PCMs can be adjusted by proportional addition of EDTA-4Na to the composite.When the mass fractions of CMC and EDTA-4Na are both 10%,the composite PCMs can exhibit the optical coldcrystallization temperature of 51.7℃ and enthalpy of 178.1 J/g.The supercooled composite PCMs without latent heat release can be maintained at room temperature(10-25℃)for up to more than two months,and subsequently the stored latent heat can be controllably released by means of thermal triggering or heterogeneous nucleation.Our findings provide novel insights into the design and construction of new PCMs with spatiotemporal performance of thermal energy long-term storage and controllable release,and consequently open a new door for the development of advanced solar thermal utilization techniques on the basis of STPCMs.展开更多
With the rapid development of cloud environment, the capabilities of systems have been promoted with powerful computing and storage. But for the characteristic of “pay-as-you-go” of cloud resources, it is necessary ...With the rapid development of cloud environment, the capabilities of systems have been promoted with powerful computing and storage. But for the characteristic of “pay-as-you-go” of cloud resources, it is necessary to consider the different data storage cost. Especially for processing of “old data” in longterm storage, an appropriate strategy is needed to reduce users’ cost. Considering the characteristics of price stratification in the current commercial cloud environment, a three-level price stratified storage strategy is proposed based on the CTT-SP algorithm, which stores part of the “old data” on relatively inexpensive secondary and tertiary storage, and ensures that the time delay caused by three-level storage does not exceed the deadline. Compared with other storage methods, the experimental result shows the strategy proposed can guarantee the time delay while reducing the cost of users significantly in longterm storage.展开更多
In this study,we investigated a novel multifunctional piezoelectric phosphor LiNbO_(3):1%Pr^(3+),0.5%Zn^(2+),which exhibited outstanding mechanoluminescence(ML)characteristics due to the strategic incorporation of Zn^...In this study,we investigated a novel multifunctional piezoelectric phosphor LiNbO_(3):1%Pr^(3+),0.5%Zn^(2+),which exhibited outstanding mechanoluminescence(ML)characteristics due to the strategic incorporation of Zn^(2+).A dual-regulation mechanism is proposed by adjusting the charge transfer band(CTB)energy level position and optimizing the defect distribution,thus realizing high-brightness,long-term storage,and highly repeatable red emission in ML.The addition of Zn^(2+)can lower the CTB energy level of the phosphor,which leads to the easier transfer of^(3)P_(0)electrons of Pr^(3+)to the^(1)D_(2)energy level through the CTB band,thus enhancing the ML red emission.The introduction of a small amount of Zn^(2+)effectively couple the trap structure with the piezoelectric properties of the material,significantly enhancing ML properties.Notably,the material exhibits excellent ML repeatability and long-term storage,maintaining a strong ML response even after 30 d.Density functional theory calculations of the phosphor confirmed that the doping of Zn^(2+)in LiNbO_(3):1%Pr^(3+)optimized the trap concentration and distribution,thereby improving the ML performance.This multifunctional material holds great potential for use in electromechanical and optoelectronic devices,contributing to the development of smart devices with broader applications.展开更多
As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrog...As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Her...Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Herein,a MOF derived multi-phase FeNi_(3)-S catalyst was specially designed for efficient hydrogen storage in MgH_(2).Experiments confirmed that the incorporation of FeNi_(3)-S into MgH_(2) significantly lowered the desorption temperature and accelerated the kinetics of hydrogen desorption and reabsorption.The initial dehydrogenation temperature of the MgH_(2)+10 wt% FeNi_(3)-S composite was 202 ℃,which was 123 ℃ lower than that of pure MgH_(2).At 325 ℃,the MgH_(2)+10 wt% FeNi_(3)-S composite released 6.57 wt% H_(2)(fully dehydrogenated) within 1000 s.Remarkably,MgH_(2)+ 10 wt% FeNi_(3)-S composite initiated rehydrogenation at room temperature and rapidly absorbed 2.49 wt% H_(2) within 30 min at 100 ℃.Moreover,6.3 wt% H_(2) was still retained after 20 cycles at 300 ℃,demonstrating the superior cycling performance of the MgH_(2)+10 wt% FeNi_(3)-S composite.The activation energy fitting calculations further evidenced the addition of FeNi_(3)-S enhanced the de/resorption kinetics of MgH_(2)(E_a= 98.6 k J/mol and 43.3 k J/mol,respectively).Through phase and microstructural analysis,it was determined that the exceptional hydrogen storage performance of the composite was attributed to the in-situ formation of Mg/Mg_(2)Ni + Fe/MgS and MgH_(2)/Mg_(2)NiH_(4)+Fe/MgS hydrogen storage systems.Further mechanistic analysis revealed that Mg_(2)Ni/Mg_(2)NiH_(4) served as “hydrogen pump” and Fe/Mg S served as “hydrogen diffusion channel”,thus accelerating the dissociation and recombination of hydrogen molecules.In conclusion,this work offers insight into catalysts combining transition metal alloys and transition metal sulfide for exerting muti-phase synergistic effect on boosting the dehydrogenation/hydrogenation reactions of MgH_(2),which can also inspire future pioneering work on designing and fabricating high efficient catalysts in other energy storage related areas.展开更多
The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and fla...The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and flammability,as well as performance degradation due to uncontrollable dendrite growth in liquid electrolytes,have been limiting the further development of energy storage devices.In this regard,gel polymer electrolytes(GPEs)based on lignocellulosic(cellulose,hemicellulose,lignin)have attracted great interest due to their high thermal stability,excellent electrolyte wettability,and natural abundance.Therefore,in this critical review,a comprehensive overview of the current challenges faced by GPEs is presented,followed by a detailed description of the opportunities and advantages of lignocellulosic materials for the fabrication of GPEs for energy storage devices.Notably,the key properties and corresponding construction strategies of GPEs for energy storage are analyzed and discussed from the perspective of lignocellulose for the first time.Moreover,the future challenges and prospects of lignocellulose-mediated GPEs in energy storage applications are also critically reviewed and discussed.We sincerely hope this review will stimulate further research on lignocellulose-mediated GPEs in energy storage and provide meaningful directions for the strategy of designing advanced GPEs.展开更多
In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)d...In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)during disturbances.Moreover,due to the frequency decoupling between the two ends of the MMCHVDC,the sending-end wind farm(SEWF)cannot obtain the frequency variation information of the REG to provide inertia response.Therefore,this paper proposes a novel coordinated source-network-storage inertia control strategy based on wind power transmission via MMC-HVDC system.First,the grid-side MMC station(GS-MMC)maps the frequency variations of the REG to direct current(DC)voltage variations through the frequency mapping control,and uses submodule capacitor energy to provide inertial power.Then,the wind farm-side MMC station(WF-MMC)restores the DC voltage variations to frequency variations through the frequency restoration control and power loss compensation,providing real-time frequency information for the wind farm.Finally,based on real-time frequency information,thewind farmutilizes the rotor kinetic energy and energy storage to provide fast and lasting power support through the wind-storage coordinated inertia control strategy.Meanwhile,when the wind turbines withdraw from the inertia response phase,the energy storage can increase the power output to compensate for the power deficit,preventing secondary frequency drops.Furthermore,this paper uses small-signal analysis to determine the appropriate values for the key parameters of the proposed control strategy.A simulation model of the wind power transmission via MMCHVDC system is built in MATLAB/Simulink environment to validate and evaluate the proposed method.The results show that the proposed coordinated control strategy can effectively improve the system inertia level and avoid the secondary frequency drop under the load sudden increase condition.展开更多
In order to address environmental pollution and resource depletion caused by traditional power generation,this paper proposes an adaptive iterative dynamic-balance optimization algorithm that integrates the Improved D...In order to address environmental pollution and resource depletion caused by traditional power generation,this paper proposes an adaptive iterative dynamic-balance optimization algorithm that integrates the Improved Dung Beetle Optimizer(IDBO)with VariationalMode Decomposition(VMD).The IDBO-VMD method is designed to enhance the accuracy and efficiency of wind-speed time-series decomposition and to effectively smooth photovoltaic power fluctuations.This study innovatively improves the traditional variational mode decomposition(VMD)algorithm,and significantly improves the accuracy and adaptive ability of signal decomposition by IDBO selfoptimization of key parameters K and a.On this basis,Fourier transform technology is used to define the boundary point between high frequency and low frequency signals,and a targeted energy distribution strategy is proposed:high frequency fluctuations are allocated to supercapacitors to quickly respond to transient power fluctuations;Lowfrequency components are distributed to lead-carbon batteries,optimizing long-term energy storage and scheduling efficiency.This strategy effectively improves the response speed and stability of the energy storage system.The experimental results demonstrate that the IDBO-VMD algorithm markedly outperforms traditional methods in both decomposition accuracy and computational efficiency.Specifically,it effectively reduces the charge–discharge frequency of the battery,prolongs battery life,and optimizes the operating ranges of the state-of-charge(SOC)for both leadcarbon batteries and supercapacitors.In addition,the energy management strategy based on the algorithm not only improves the overall energy utilization efficiency of the system,but also shows excellent performance in the dynamic management and intelligent scheduling of renewable energy generation.展开更多
Achieving high energy and power densities is currently a core challenge in the fabrication of energy storage materials.Although numerous high-capacity materials have been developed,conventional planar electrodes canno...Achieving high energy and power densities is currently a core challenge in the fabrication of energy storage materials.Although numerous high-capacity materials have been developed,conventional planar electrodes cannot achieve high active material loading and efficient ion/electron transport simultaneously.By contrast,three-dimensional(3D)structures have attracted increasing interest because of their capacity to enhance active material utilization,shorten ion and electron transport pathways,reduce interfacial impedance,and provide spatial accommodation for volume expansion.Additive manufacturing(AM)technology effectively fabricates energy-storage materials with 3D structures by accurately constructing complex 3D structures via layer-by-layer deposition.Recent studies have employed AM to construct ordered 3D electrodes that can optimize ion/electron transport,regulate electric field distribution,or improve the electrode-electrolyte interface,thereby contributing to enhanced kinetic performance and cycling stability.This review systematically summarizes the applications of several AM technologies in the fabrication of energy storage materials and analyzes their respective advantages and limitations.Subsequently,the advantages of AM technology in the fabrication of energy storage materials and several major optimization strategies are comprehensively discussed.Finally,the major challenges and potential applications of AM technology in energy storage material optimization are discussed.展开更多
MXene derivatives are notable two-dimensional nanomaterials with numerous prospective applications in the domains of energy development.MXene derivative,MBene,diversifies its focus on energy storage and harvesting due...MXene derivatives are notable two-dimensional nanomaterials with numerous prospective applications in the domains of energy development.MXene derivative,MBene,diversifies its focus on energy storage and harvesting due to its exceptional electrical conductivity,structural flexibility,and mechanical properties.This comprehensive review describes the sandwich-like structure of the synthesized MBene,derived from its multilayered parent material and its distinct chemical framework to date.The fields of focus encompass the investigation of novel MBenes,the study of phase-changing mechanisms,and the examination of hex-MBenes,ortho-MBenes,tetra-MBenes,tri-MBenes,and MXenes with identical transition metal components.A critical analysis is also provided on the electrochemical mechanism and performance of MBene in energy storage(Li/Na/Mg/Ca/Li–S batteries and supercapacitors),as well as conversion and harvesting(CO_(2) reduction,and nitrogen reduction reactions).The persistent difficulties associated with conducting experimental synthesis and establishing artificial intelligence-based forecasts are extensively deliberated alongside the potential and forthcoming prospects of MBenes.This review provides a single platform for an overview of the MBene’s potential in energy storage and harvesting.展开更多
Structural instability and sluggish lithium-ion(Li+) kinetics of spinel NiCo_(2)O_(4) anodes severely hinder their applications in high-energy-density lithium-ion batteries.Mesocrystalline structures exhibit promising...Structural instability and sluggish lithium-ion(Li+) kinetics of spinel NiCo_(2)O_(4) anodes severely hinder their applications in high-energy-density lithium-ion batteries.Mesocrystalline structures exhibit promising potential in balancing structural stability and enhancing reaction kinetics.However,their controlled synthesis mechanisms remain elusive.Herein,a substrate interface engineering strategy is developed to achieve controllable synthesis of mesocrystalline and polycrystalline NiCo_(2)O_(4) nanorods.Remarkably,mesocrystalline NiCo_(2)O_(4) exhibits a high capacity retention rate of 85.7% after 500 cycles at 2 A/g,attributed to its porous structure facilitating Li^(+) transport kinetics and unique stress-buffering effect validated by ex-situ TEM.Theoretical calculations and interfacial chemical analysis reveal that substratecrystal surface engineering regulates the nucleation-growth pathways:Acid-treated nickel foam enables epitaxial growth via lattice matching,acting as a low-interfacial-energy template to reduce nucleation barriers and promote low-temperature oriented crystallization.In contrast,carbon cloth requires hightemperature thermal activation to overcome surface diffusion barriers induced by elevated interfacial energy.This substrate-driven crystallization kinetic modulation overcomes the limitations of random nucleation in conventional hydrothermal synthesis.The established substrate-crystal interfacial interaction model not only clarifies the kinetic essence of crystal orientation regulation but also provides a universal theoretical framework for lattice-matching design and mesostructural optimization of advanced electrode materials.展开更多
Micro-sized anatase TiO_(2) displays inferior capacity as cathode material for magnesium ion batteries because of the higher diffusion energy barrier of Mg^(2+)in anatase TiO_(2) lattice.Herein,we report that nanosize...Micro-sized anatase TiO_(2) displays inferior capacity as cathode material for magnesium ion batteries because of the higher diffusion energy barrier of Mg^(2+)in anatase TiO_(2) lattice.Herein,we report that nanosized anatase TiO_(2) exposed(001)facet doubles the capacity compared to the micro-sized sample ascribed to the interfacial Mg^(2+)ion storage.First-principles calculations reveal that the diffusion energy barrier of Mg^(2+)on the(001)facet is significantly lower than those in the bulk phase and on(100)facet,and the adsorption energy of Mg^(2+)on the(001)facet is also considerably lower than that on(100)facet,which guarantees superior interfacial Mg^(2+)storage of(001)facet.Moreover,anatase TiO_(2) exposed(001)facet displays a significantly higher capacity of 312.9 mAh g^(−1) in Mg-Li dual-salt electrolyte compared to 234.3 mAh g^(−1) in Li salt electrolyte.The adsorption energies of Mg^(2+)on(001)facet are much lower than the adsorption energies of Li+on(001)facet,implying that the Mg^(2+)ion interfacial storage is more favorable.These results highlight that controlling the crystal facet of the nanocrystals effectively enhances the interfacial storage of multivalent ions.This work offers valuable guidance for the rational design of high-capacity storage systems.展开更多
Climate change and anthropogenic activities have driven significant terrestrial water storage changes(TWSC)in the Three Rivers Source Region(TRSR),exerting profound impacts on freshwater availability across China and ...Climate change and anthropogenic activities have driven significant terrestrial water storage changes(TWSC)in the Three Rivers Source Region(TRSR),exerting profound impacts on freshwater availability across China and broader Asia.However,long-term TWSC characterization remains challenging due to limited observational data in this alpine region.Here,we integrate GRACE observations(2002-2020),ERA5-Land reanalysis,and GLDAS data to reconstruct TWSC using two methods:(1)the water balance method(PER)and(2)the component summation method(SS),applied to three input datasets(ERA5-Land,GLDAS,and their average,GLER).Comparative analysis reveals that the SS method applied to GL-ER yields the highest consistency with GRACE-derived TWSC.Using this optimal approach,we extend the analysis to 1951~2020,uncovering spatiotemporal TWSC patterns.Although annual TWSC trends appear negligible due to strong seasonality,we introduce the intra-year TWSC fluctuation(TWSCF)index to quantify cumulative variability.A significant(p<0.05)transition occurred in 1980,with TWSCF shifting from a declining trend(-0.39 mm/yr)to an increasing trend(0.56 mm/yr),primarily driven by soil moisture changes.However,Hurst exponent analysis suggests this upward trend may not persist.Drought and vegetation assessments indicate concurrent wetting and greening in the TRSR.TWSC correlates strongly with meteorological drought,acting as a reliable drought indicator while its linkage with vegetation dynamics suggests a potential contribution to greening.Our findings provide a robust framework for understanding long-term TWSC evolution and its hydrological-ecological interactions under climate change.展开更多
Metal hydrides with high hydrogen density provide promising hydrogen storage paths for hydrogen transportation.However,the requirement of highly pure H_(2)for re-hydrogenation limits its wide application.Here,amorphou...Metal hydrides with high hydrogen density provide promising hydrogen storage paths for hydrogen transportation.However,the requirement of highly pure H_(2)for re-hydrogenation limits its wide application.Here,amorphous Al_(2)O_(3)shells(10 nm)were deposited on the surface of highly active hydrogen storage material particles(MgH_(2)-ZrTi)by atomic layer deposition to obtain MgH_(2)-ZrTi@Al_(2)O_(3),which have been demonstrated to be air stable with selective adsorption of H_(2)under a hydrogen atmosphere with different impurities(CH_(4),O_(2),N_(2),and CO_(2)).About 4.79 wt%H_(2)was adsorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)at 75℃under 10%CH_(4)+90%H_(2)atmosphere within 3 h with no kinetic or density decay after 5 cycles(~100%capacity retention).Furthermore,about 4 wt%of H_(2)was absorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)under 0.1%O_(2)+0.4%N_(2)+99.5%H_(2)and 0.1%CO_(2)+0.4%N_(2)+99.5%H_(2)atmospheres at 100℃within 0.5 h,respectively,demonstrating the selective hydrogen absorption of MgH_(2)-ZrTi@10nmAl_(2)O_(3)in both oxygen-containing and carbon dioxide-containing atmospheres hydrogen atmosphere.The absorption and desorption curves of MgH_(2)-ZrTi@10nmAl_(2)O_(3)with and without absorption in pure hydrogen and then in 21%O_(2)+79%N_(2)for 1 h were found to overlap,further confirming the successful shielding effect of Al_(2)O_(3)shells against O_(2)and N_(2).The MgH_(2)-ZrTi@10nmAl_(2)O_(3)has been demonstrated to be air stable and have excellent selective hydrogen absorption performance under the atmosphere with CH_(4),O_(2),N_(2),and CO_(2).展开更多
Aqueous sodium-ion batteries(ASIBs) offer significant advantages for energy storage on a large scale,attributed to their economical cost,secure operatio n,and eco-friend ly natu re.Among the leading cathode materials ...Aqueous sodium-ion batteries(ASIBs) offer significant advantages for energy storage on a large scale,attributed to their economical cost,secure operatio n,and eco-friend ly natu re.Among the leading cathode materials for ASIBs,Na_(3)V_(2)(PO_(4))_(3)(NVP) exhibits excellent structural stability and a high Na+diffusion coefficient,making it a promising option.However,the high solubility of vanadium-based materials in aqueous electrolytes engenders suboptimal cycling stability for Na_(3)V_(2)(PO_(4))_(3),constraining its application in ASIBs.Herein,the Cr-substituted Na_(3)V_(1.3)Cr_(0.7)(PO_(4))3@C(NV_(1.3)Cr_(0.7)P) cathode material was synthesized via a simple sol-gel method.It is found that Cr substitution reduces the cell parameters of NV_(1.3)Cr_(0.7)P,effectively reinforcing the crystal structure.Furthermore,NV_(1.3)Cr_(0.7)P alters the Na^(+)insertion/extraction mechanism,transforming the typical two-phase reaction between Na_(1)V_(2)(PO_(4))_(3)and Na_(3)V_(2)(PO_(4))3into continuous solid-solution reactions with stable intermediates.The Cr substitution diminishes the sodium-ion diffusion energy barrier in NV_(1.3)Cr_(0.7)P,leading to smoother Na+insertion and extraction processes.Consequently,NV_(1.3)Cr_(0.7)P exhibits impressive cycling stability,retaining 74.8% of its capacity after 5,000 cycles at a current density of 5 A g^(-1),along with an outstanding rate performance of 79,2% at 10 A g^(-1).This work elucidates the stable Na^(+)insertion/extraction processes in Cr-substituted NV_(1.3)Cr_(0.7)P,offering insights into the application of vanadium-based materials in aqueous sodium-ion batteries.展开更多
To accomplish on-site separation, preconcentration and cold storage of highly volatile organic compounds(VOCs) from water samples as well as their rapid transportation to laboratory, a high-throughput miniaturized pur...To accomplish on-site separation, preconcentration and cold storage of highly volatile organic compounds(VOCs) from water samples as well as their rapid transportation to laboratory, a high-throughput miniaturized purge-and-trap(μP&T) device integrating semiconductor refrigeration storage was developed in this work. Water samples were poured into the purge vessels and purged with purified air generated by an air pump. The VOCs in water samples were then separated and preconcentrated with sorbent tubes. After their complete separation and preconcentration, the tubes were subsequently preserved in the semiconductor refrigeration unit of the μP&T device. Notably, the high integration, small size, light weight, and low power consumption of the device makes it easy to be hand-carried to the field and transport by drone from remote locations, significantly enhancing the flexibility of field sampling. The performances of the device were evaluated by comparing analytical figures of merit for the detection of four cyclic volatile methylsiloxanes(cVMSs) in water. Compared to conventional collection and preservation methods, our proposed device preserved the VOCs more consistently in the sorbent tubes, with less than 5% loss of all analytes, and maintained stability for at least 20 days at 4℃. As a proof-of-concept,10 municipal wastewater samples were pretreated using this device with recoveries ranging from 82.5% to 99.9% for the target VOCs.展开更多
Lipid-like nanoparticles(LLNs)have been extensively explored for messenger RNA(mRNA)delivery in various biomedical applications.However,the long-term storage of these nanoparticles is still a challenge for their clini...Lipid-like nanoparticles(LLNs)have been extensively explored for messenger RNA(mRNA)delivery in various biomedical applications.However,the long-term storage of these nanoparticles is still a challenge for their clinical translation.In this study,we investigated a series of conditions for the long-term storage of LLNs with encapsulation of mRNA.We evaluated the stability of LLNs with different concentrations of cryoprotectants(sucrose,trehalose or mannitol)under the conditions of freezing or lyophilization processes.Through in vitro and in vivo mRNA delivery studies,we identified the optimal storage condition,and found that the addition with 5%(w/v)sucrose or trehalose to LLNs could remain their mRNA delivery efficiency for at least three months in the liquid nitrogen storage condition.展开更多
Long-term storage(LTS)can provide various services to address seasonal fluctuations in variable renewable energy by reducing energy curtailment.However,long-term unit commitment(UC)with LTS involves mixed-integer prog...Long-term storage(LTS)can provide various services to address seasonal fluctuations in variable renewable energy by reducing energy curtailment.However,long-term unit commitment(UC)with LTS involves mixed-integer programming with large-scale coupling constraints between consecutive intervals(state-of-charge(SOC)constraint of LTS,ramping rate,and minimum up/down time constraints of thermal units),resulting in a significant computational burden.Herein,an iterative-based fast solution method is proposed to solve the long-term UC with LTS.First,the UC with coupling constraints is split into several sub problems that can be solved in parallel.Second,the solutions of the sub problems are adjusted to obtain a feasible solution that satisfies the coupling constraints.Third,a decoupling method for long-term time-series coupling constraints is proposed to determine the global optimization of the SOC of the LTS.The price-arbitrage model of the LTS determines the SOC boundary of the LTS for each sub problem.Finally,the sub problem with the SOC boundary of the LTS is iteratively solved independently.The proposed method was verified using a modified IEEE 24-bus system.The results showed that the computation time of the unit combination problem can be reduced by 97.8%,with a relative error of 3.62%.展开更多
A hydrogen energy storage system(HESS)is one of the many risingmodern green innovations,using excess energy to generate hydrogen and storing it for various purposes.With that,there have been many discussions about com...A hydrogen energy storage system(HESS)is one of the many risingmodern green innovations,using excess energy to generate hydrogen and storing it for various purposes.With that,there have been many discussions about commercializing HESS and improving it further.However,the design and sizing process can be overwhelming to comprehend with various sources to examine,and understanding optimal design methodologies is crucial to optimize a HESS design.With that,this review aims to collect and analyse a wide range of HESS studies to summarise recent studies.Two different collections of studies are studied,one was sourced by the main author for preliminary readings,and another was obtained via VOSViewer.The findings from the Web of Science platform were also examined for amore comprehensive understanding.Major findings include the People’sRepublic of China has been active in HESS research,as most works and active organizations originate from this country.HESS has been mainly researched to support power generation and balance load demands,with financial analysis being the common scope of analysis.MATLAB is a common tool used for HESS design,modelling,and optimization as it can handle complex calculations.Artificial neural network(ANN)has the potential to be used to model the HESS,but additional review is required as a formof future work.From a commercialization perspective,pressurized hydrogen tanks are ideal for hydrogen storage in a HESS,but other methods can be considered after additional research and development.From this review,it can be implied that modelling works will be the way forward for HESS research,but extensive collaborations and additional review are needed.Overall,this review summarized various takeaways that future research works on HESS can use.展开更多
基金the financial support from the Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(YLU-DNL Fund 2021007)the National Nature Science Foundation of China(21903082 and 22273100)+2 种基金the Dalian Institute of Chemical Physics(DICP I202036,and I202218)the DNL Cooperation Fund,CAS(DNL202012)Liaoning Provincial Natural Science Foundation of China under grant 2022-MS-020。
文摘Phase change materials(PCMs)have attracted much attention in the field of solar thermal utilization recently,due to their outstanding thermal energy storage performance.However,PCMs usually release their stored latent heat spontaneously as the temperature below the phase transition temperature,rendering thermal energy storage and release uncontrollable,thus hindering their practical application in time and space.Herein,we developed erythritol/sodium carboxymethylcellulose/tetrasodium ethylenediaminetetraacetate(ERY/CMC/EDTA-4Na)composite PCMs with novel spatiotemporal thermal energy storage properties,defined as spatiotemporal PCMs(STPCMs),which exhibit the capacity of thermal energy long-term storage and controllable release.Our results show that the composite PCMs are unable to lose latent heat due to spontaneous crystallization during cooling,but can controllably release thermal energy through cold crystallization during reheating.The cold-crystallization temperature and enthalpy of composite PCMs can be adjusted by proportional addition of EDTA-4Na to the composite.When the mass fractions of CMC and EDTA-4Na are both 10%,the composite PCMs can exhibit the optical coldcrystallization temperature of 51.7℃ and enthalpy of 178.1 J/g.The supercooled composite PCMs without latent heat release can be maintained at room temperature(10-25℃)for up to more than two months,and subsequently the stored latent heat can be controllably released by means of thermal triggering or heterogeneous nucleation.Our findings provide novel insights into the design and construction of new PCMs with spatiotemporal performance of thermal energy long-term storage and controllable release,and consequently open a new door for the development of advanced solar thermal utilization techniques on the basis of STPCMs.
基金Anhui Natural Science Foundation 1908085MF206 and National Natural Science Foundation of China (NO. 61402007, 61573022)the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry.
文摘With the rapid development of cloud environment, the capabilities of systems have been promoted with powerful computing and storage. But for the characteristic of “pay-as-you-go” of cloud resources, it is necessary to consider the different data storage cost. Especially for processing of “old data” in longterm storage, an appropriate strategy is needed to reduce users’ cost. Considering the characteristics of price stratification in the current commercial cloud environment, a three-level price stratified storage strategy is proposed based on the CTT-SP algorithm, which stores part of the “old data” on relatively inexpensive secondary and tertiary storage, and ensures that the time delay caused by three-level storage does not exceed the deadline. Compared with other storage methods, the experimental result shows the strategy proposed can guarantee the time delay while reducing the cost of users significantly in longterm storage.
基金supported by the National Natural Science Foundation of China(52172001)Guangxi Natural Science Foundation(2022GXNSFDA035082)+3 种基金the Central Government Guided Local Science and Technology Development Fund Project(ZY22096009)the Guangxi Key Laboratory of Information Materials(Guilin University of Electronic Technology,Project No.211006-Z)the Innovation Project of GUET Graduate Education(2024YCXB03)the Program for Bagui Scholars of Guangxi,China.
文摘In this study,we investigated a novel multifunctional piezoelectric phosphor LiNbO_(3):1%Pr^(3+),0.5%Zn^(2+),which exhibited outstanding mechanoluminescence(ML)characteristics due to the strategic incorporation of Zn^(2+).A dual-regulation mechanism is proposed by adjusting the charge transfer band(CTB)energy level position and optimizing the defect distribution,thus realizing high-brightness,long-term storage,and highly repeatable red emission in ML.The addition of Zn^(2+)can lower the CTB energy level of the phosphor,which leads to the easier transfer of^(3)P_(0)electrons of Pr^(3+)to the^(1)D_(2)energy level through the CTB band,thus enhancing the ML red emission.The introduction of a small amount of Zn^(2+)effectively couple the trap structure with the piezoelectric properties of the material,significantly enhancing ML properties.Notably,the material exhibits excellent ML repeatability and long-term storage,maintaining a strong ML response even after 30 d.Density functional theory calculations of the phosphor confirmed that the doping of Zn^(2+)in LiNbO_(3):1%Pr^(3+)optimized the trap concentration and distribution,thereby improving the ML performance.This multifunctional material holds great potential for use in electromechanical and optoelectronic devices,contributing to the development of smart devices with broader applications.
基金Supported by Design and Performance Study of High-flux Metal Hydride Reactor Based on the Bionic Optimization(2078262)the‘Four-Chain’Integration Project at the Qinchuangyuan Chief Platform(S2025-YF-ZDXM)。
文摘As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金supported by the National Key R&D Program of China (No.2022YFB3803703)the National Natural Science Foundation of China (Nos.52071141,52271212,52201250,51771056,22305104)+1 种基金the Natural Science Foundation of Jiangsu Province (No.BK20210893)the Ministry of Science and Technology of the People’s Republic of China (No.G2023014022L)。
文摘Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Herein,a MOF derived multi-phase FeNi_(3)-S catalyst was specially designed for efficient hydrogen storage in MgH_(2).Experiments confirmed that the incorporation of FeNi_(3)-S into MgH_(2) significantly lowered the desorption temperature and accelerated the kinetics of hydrogen desorption and reabsorption.The initial dehydrogenation temperature of the MgH_(2)+10 wt% FeNi_(3)-S composite was 202 ℃,which was 123 ℃ lower than that of pure MgH_(2).At 325 ℃,the MgH_(2)+10 wt% FeNi_(3)-S composite released 6.57 wt% H_(2)(fully dehydrogenated) within 1000 s.Remarkably,MgH_(2)+ 10 wt% FeNi_(3)-S composite initiated rehydrogenation at room temperature and rapidly absorbed 2.49 wt% H_(2) within 30 min at 100 ℃.Moreover,6.3 wt% H_(2) was still retained after 20 cycles at 300 ℃,demonstrating the superior cycling performance of the MgH_(2)+10 wt% FeNi_(3)-S composite.The activation energy fitting calculations further evidenced the addition of FeNi_(3)-S enhanced the de/resorption kinetics of MgH_(2)(E_a= 98.6 k J/mol and 43.3 k J/mol,respectively).Through phase and microstructural analysis,it was determined that the exceptional hydrogen storage performance of the composite was attributed to the in-situ formation of Mg/Mg_(2)Ni + Fe/MgS and MgH_(2)/Mg_(2)NiH_(4)+Fe/MgS hydrogen storage systems.Further mechanistic analysis revealed that Mg_(2)Ni/Mg_(2)NiH_(4) served as “hydrogen pump” and Fe/Mg S served as “hydrogen diffusion channel”,thus accelerating the dissociation and recombination of hydrogen molecules.In conclusion,this work offers insight into catalysts combining transition metal alloys and transition metal sulfide for exerting muti-phase synergistic effect on boosting the dehydrogenation/hydrogenation reactions of MgH_(2),which can also inspire future pioneering work on designing and fabricating high efficient catalysts in other energy storage related areas.
基金supported by the National Natural Science Foundation of China(32501592,32271814,32301530,32471806)Young Elite Scientist Sponsorship Program by Cast(No.YESS20230242)+3 种基金Natural Science Foundation of Tianjin(23JCZDJC00630,24JCZDJC00630)the China Postdoctoral Science Foundation(2023M740563)Tianjin Enterprise Technology Commissioner Project(25YDTPJC00690)China Scholarship Council(202408120091,202408120105).
文摘The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and flammability,as well as performance degradation due to uncontrollable dendrite growth in liquid electrolytes,have been limiting the further development of energy storage devices.In this regard,gel polymer electrolytes(GPEs)based on lignocellulosic(cellulose,hemicellulose,lignin)have attracted great interest due to their high thermal stability,excellent electrolyte wettability,and natural abundance.Therefore,in this critical review,a comprehensive overview of the current challenges faced by GPEs is presented,followed by a detailed description of the opportunities and advantages of lignocellulosic materials for the fabrication of GPEs for energy storage devices.Notably,the key properties and corresponding construction strategies of GPEs for energy storage are analyzed and discussed from the perspective of lignocellulose for the first time.Moreover,the future challenges and prospects of lignocellulose-mediated GPEs in energy storage applications are also critically reviewed and discussed.We sincerely hope this review will stimulate further research on lignocellulose-mediated GPEs in energy storage and provide meaningful directions for the strategy of designing advanced GPEs.
基金funded by State Grid Corporation of China Central Branch Technology Project(52140024000C).
文摘In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)during disturbances.Moreover,due to the frequency decoupling between the two ends of the MMCHVDC,the sending-end wind farm(SEWF)cannot obtain the frequency variation information of the REG to provide inertia response.Therefore,this paper proposes a novel coordinated source-network-storage inertia control strategy based on wind power transmission via MMC-HVDC system.First,the grid-side MMC station(GS-MMC)maps the frequency variations of the REG to direct current(DC)voltage variations through the frequency mapping control,and uses submodule capacitor energy to provide inertial power.Then,the wind farm-side MMC station(WF-MMC)restores the DC voltage variations to frequency variations through the frequency restoration control and power loss compensation,providing real-time frequency information for the wind farm.Finally,based on real-time frequency information,thewind farmutilizes the rotor kinetic energy and energy storage to provide fast and lasting power support through the wind-storage coordinated inertia control strategy.Meanwhile,when the wind turbines withdraw from the inertia response phase,the energy storage can increase the power output to compensate for the power deficit,preventing secondary frequency drops.Furthermore,this paper uses small-signal analysis to determine the appropriate values for the key parameters of the proposed control strategy.A simulation model of the wind power transmission via MMCHVDC system is built in MATLAB/Simulink environment to validate and evaluate the proposed method.The results show that the proposed coordinated control strategy can effectively improve the system inertia level and avoid the secondary frequency drop under the load sudden increase condition.
基金funded by the Institute of Smart Energy,Huaiyin Institute of Technology,under Grant No.HIT-ISE-2024-07.
文摘In order to address environmental pollution and resource depletion caused by traditional power generation,this paper proposes an adaptive iterative dynamic-balance optimization algorithm that integrates the Improved Dung Beetle Optimizer(IDBO)with VariationalMode Decomposition(VMD).The IDBO-VMD method is designed to enhance the accuracy and efficiency of wind-speed time-series decomposition and to effectively smooth photovoltaic power fluctuations.This study innovatively improves the traditional variational mode decomposition(VMD)algorithm,and significantly improves the accuracy and adaptive ability of signal decomposition by IDBO selfoptimization of key parameters K and a.On this basis,Fourier transform technology is used to define the boundary point between high frequency and low frequency signals,and a targeted energy distribution strategy is proposed:high frequency fluctuations are allocated to supercapacitors to quickly respond to transient power fluctuations;Lowfrequency components are distributed to lead-carbon batteries,optimizing long-term energy storage and scheduling efficiency.This strategy effectively improves the response speed and stability of the energy storage system.The experimental results demonstrate that the IDBO-VMD algorithm markedly outperforms traditional methods in both decomposition accuracy and computational efficiency.Specifically,it effectively reduces the charge–discharge frequency of the battery,prolongs battery life,and optimizes the operating ranges of the state-of-charge(SOC)for both leadcarbon batteries and supercapacitors.In addition,the energy management strategy based on the algorithm not only improves the overall energy utilization efficiency of the system,but also shows excellent performance in the dynamic management and intelligent scheduling of renewable energy generation.
基金support of the National Natural Science Foundation of China(No.52574411)Beijing Natural Science Foundation(No.2242043).
文摘Achieving high energy and power densities is currently a core challenge in the fabrication of energy storage materials.Although numerous high-capacity materials have been developed,conventional planar electrodes cannot achieve high active material loading and efficient ion/electron transport simultaneously.By contrast,three-dimensional(3D)structures have attracted increasing interest because of their capacity to enhance active material utilization,shorten ion and electron transport pathways,reduce interfacial impedance,and provide spatial accommodation for volume expansion.Additive manufacturing(AM)technology effectively fabricates energy-storage materials with 3D structures by accurately constructing complex 3D structures via layer-by-layer deposition.Recent studies have employed AM to construct ordered 3D electrodes that can optimize ion/electron transport,regulate electric field distribution,or improve the electrode-electrolyte interface,thereby contributing to enhanced kinetic performance and cycling stability.This review systematically summarizes the applications of several AM technologies in the fabrication of energy storage materials and analyzes their respective advantages and limitations.Subsequently,the advantages of AM technology in the fabrication of energy storage materials and several major optimization strategies are comprehensively discussed.Finally,the major challenges and potential applications of AM technology in energy storage material optimization are discussed.
基金supported by the National Natural Science Foundation of China(No.52302241 and 22225801)the Major Science and Technology Programs of Henan Province(241100240200)the China Postdoctoral Science Foundation(No.2023M730940).
文摘MXene derivatives are notable two-dimensional nanomaterials with numerous prospective applications in the domains of energy development.MXene derivative,MBene,diversifies its focus on energy storage and harvesting due to its exceptional electrical conductivity,structural flexibility,and mechanical properties.This comprehensive review describes the sandwich-like structure of the synthesized MBene,derived from its multilayered parent material and its distinct chemical framework to date.The fields of focus encompass the investigation of novel MBenes,the study of phase-changing mechanisms,and the examination of hex-MBenes,ortho-MBenes,tetra-MBenes,tri-MBenes,and MXenes with identical transition metal components.A critical analysis is also provided on the electrochemical mechanism and performance of MBene in energy storage(Li/Na/Mg/Ca/Li–S batteries and supercapacitors),as well as conversion and harvesting(CO_(2) reduction,and nitrogen reduction reactions).The persistent difficulties associated with conducting experimental synthesis and establishing artificial intelligence-based forecasts are extensively deliberated alongside the potential and forthcoming prospects of MBenes.This review provides a single platform for an overview of the MBene’s potential in energy storage and harvesting.
基金financially supported by the National Nature Science Foundation of China (No.52401273)Science and Technology Department of Henan (Nos.242102241007,252102320178 and 252102321067)Training Program for Young Backbone Teachers in Higher Education Institutions in Henan Province (No.2024GGJS101)。
文摘Structural instability and sluggish lithium-ion(Li+) kinetics of spinel NiCo_(2)O_(4) anodes severely hinder their applications in high-energy-density lithium-ion batteries.Mesocrystalline structures exhibit promising potential in balancing structural stability and enhancing reaction kinetics.However,their controlled synthesis mechanisms remain elusive.Herein,a substrate interface engineering strategy is developed to achieve controllable synthesis of mesocrystalline and polycrystalline NiCo_(2)O_(4) nanorods.Remarkably,mesocrystalline NiCo_(2)O_(4) exhibits a high capacity retention rate of 85.7% after 500 cycles at 2 A/g,attributed to its porous structure facilitating Li^(+) transport kinetics and unique stress-buffering effect validated by ex-situ TEM.Theoretical calculations and interfacial chemical analysis reveal that substratecrystal surface engineering regulates the nucleation-growth pathways:Acid-treated nickel foam enables epitaxial growth via lattice matching,acting as a low-interfacial-energy template to reduce nucleation barriers and promote low-temperature oriented crystallization.In contrast,carbon cloth requires hightemperature thermal activation to overcome surface diffusion barriers induced by elevated interfacial energy.This substrate-driven crystallization kinetic modulation overcomes the limitations of random nucleation in conventional hydrothermal synthesis.The established substrate-crystal interfacial interaction model not only clarifies the kinetic essence of crystal orientation regulation but also provides a universal theoretical framework for lattice-matching design and mesostructural optimization of advanced electrode materials.
基金supported by the National Key R&D Program of China(No.2023YFB3809500)the Fundamental Research Funds for the Central Universities(No.2024CDJXY003)+1 种基金the Venture&Innovation Support Program for Chongqing Overseas Returnees(cx2023087)The Chongqing Technology Innovation and Application Development Project(No.2024TIAD-KPX0003).
文摘Micro-sized anatase TiO_(2) displays inferior capacity as cathode material for magnesium ion batteries because of the higher diffusion energy barrier of Mg^(2+)in anatase TiO_(2) lattice.Herein,we report that nanosized anatase TiO_(2) exposed(001)facet doubles the capacity compared to the micro-sized sample ascribed to the interfacial Mg^(2+)ion storage.First-principles calculations reveal that the diffusion energy barrier of Mg^(2+)on the(001)facet is significantly lower than those in the bulk phase and on(100)facet,and the adsorption energy of Mg^(2+)on the(001)facet is also considerably lower than that on(100)facet,which guarantees superior interfacial Mg^(2+)storage of(001)facet.Moreover,anatase TiO_(2) exposed(001)facet displays a significantly higher capacity of 312.9 mAh g^(−1) in Mg-Li dual-salt electrolyte compared to 234.3 mAh g^(−1) in Li salt electrolyte.The adsorption energies of Mg^(2+)on(001)facet are much lower than the adsorption energies of Li+on(001)facet,implying that the Mg^(2+)ion interfacial storage is more favorable.These results highlight that controlling the crystal facet of the nanocrystals effectively enhances the interfacial storage of multivalent ions.This work offers valuable guidance for the rational design of high-capacity storage systems.
基金funded by the Postdoctoral Research Startup Foundation of University of Jinan(Grant No.100389917).
文摘Climate change and anthropogenic activities have driven significant terrestrial water storage changes(TWSC)in the Three Rivers Source Region(TRSR),exerting profound impacts on freshwater availability across China and broader Asia.However,long-term TWSC characterization remains challenging due to limited observational data in this alpine region.Here,we integrate GRACE observations(2002-2020),ERA5-Land reanalysis,and GLDAS data to reconstruct TWSC using two methods:(1)the water balance method(PER)and(2)the component summation method(SS),applied to three input datasets(ERA5-Land,GLDAS,and their average,GLER).Comparative analysis reveals that the SS method applied to GL-ER yields the highest consistency with GRACE-derived TWSC.Using this optimal approach,we extend the analysis to 1951~2020,uncovering spatiotemporal TWSC patterns.Although annual TWSC trends appear negligible due to strong seasonality,we introduce the intra-year TWSC fluctuation(TWSCF)index to quantify cumulative variability.A significant(p<0.05)transition occurred in 1980,with TWSCF shifting from a declining trend(-0.39 mm/yr)to an increasing trend(0.56 mm/yr),primarily driven by soil moisture changes.However,Hurst exponent analysis suggests this upward trend may not persist.Drought and vegetation assessments indicate concurrent wetting and greening in the TRSR.TWSC correlates strongly with meteorological drought,acting as a reliable drought indicator while its linkage with vegetation dynamics suggests a potential contribution to greening.Our findings provide a robust framework for understanding long-term TWSC evolution and its hydrological-ecological interactions under climate change.
基金supported by the National Natural Science Foundation of China(22175136)the State Key Laboratory of Electrical Insulation and Power Equipment(EIPE23127)the Fundamental Research Funds for the Central Universities(xtr052024009).
文摘Metal hydrides with high hydrogen density provide promising hydrogen storage paths for hydrogen transportation.However,the requirement of highly pure H_(2)for re-hydrogenation limits its wide application.Here,amorphous Al_(2)O_(3)shells(10 nm)were deposited on the surface of highly active hydrogen storage material particles(MgH_(2)-ZrTi)by atomic layer deposition to obtain MgH_(2)-ZrTi@Al_(2)O_(3),which have been demonstrated to be air stable with selective adsorption of H_(2)under a hydrogen atmosphere with different impurities(CH_(4),O_(2),N_(2),and CO_(2)).About 4.79 wt%H_(2)was adsorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)at 75℃under 10%CH_(4)+90%H_(2)atmosphere within 3 h with no kinetic or density decay after 5 cycles(~100%capacity retention).Furthermore,about 4 wt%of H_(2)was absorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)under 0.1%O_(2)+0.4%N_(2)+99.5%H_(2)and 0.1%CO_(2)+0.4%N_(2)+99.5%H_(2)atmospheres at 100℃within 0.5 h,respectively,demonstrating the selective hydrogen absorption of MgH_(2)-ZrTi@10nmAl_(2)O_(3)in both oxygen-containing and carbon dioxide-containing atmospheres hydrogen atmosphere.The absorption and desorption curves of MgH_(2)-ZrTi@10nmAl_(2)O_(3)with and without absorption in pure hydrogen and then in 21%O_(2)+79%N_(2)for 1 h were found to overlap,further confirming the successful shielding effect of Al_(2)O_(3)shells against O_(2)and N_(2).The MgH_(2)-ZrTi@10nmAl_(2)O_(3)has been demonstrated to be air stable and have excellent selective hydrogen absorption performance under the atmosphere with CH_(4),O_(2),N_(2),and CO_(2).
基金financially supported by the Scientific and Technological Plan Project of Guizhou Province ([2024]054)Additional support came from the Industry and Education Combination Innovation Platform of Intelligent Manufacturing and Graduate Joint Training Base at Guizhou University (2020-520000-83-01324061)the Guizhou Engineering Research Center for Smart Services (2203-520102-04-04-298868)。
文摘Aqueous sodium-ion batteries(ASIBs) offer significant advantages for energy storage on a large scale,attributed to their economical cost,secure operatio n,and eco-friend ly natu re.Among the leading cathode materials for ASIBs,Na_(3)V_(2)(PO_(4))_(3)(NVP) exhibits excellent structural stability and a high Na+diffusion coefficient,making it a promising option.However,the high solubility of vanadium-based materials in aqueous electrolytes engenders suboptimal cycling stability for Na_(3)V_(2)(PO_(4))_(3),constraining its application in ASIBs.Herein,the Cr-substituted Na_(3)V_(1.3)Cr_(0.7)(PO_(4))3@C(NV_(1.3)Cr_(0.7)P) cathode material was synthesized via a simple sol-gel method.It is found that Cr substitution reduces the cell parameters of NV_(1.3)Cr_(0.7)P,effectively reinforcing the crystal structure.Furthermore,NV_(1.3)Cr_(0.7)P alters the Na^(+)insertion/extraction mechanism,transforming the typical two-phase reaction between Na_(1)V_(2)(PO_(4))_(3)and Na_(3)V_(2)(PO_(4))3into continuous solid-solution reactions with stable intermediates.The Cr substitution diminishes the sodium-ion diffusion energy barrier in NV_(1.3)Cr_(0.7)P,leading to smoother Na+insertion and extraction processes.Consequently,NV_(1.3)Cr_(0.7)P exhibits impressive cycling stability,retaining 74.8% of its capacity after 5,000 cycles at a current density of 5 A g^(-1),along with an outstanding rate performance of 79,2% at 10 A g^(-1).This work elucidates the stable Na^(+)insertion/extraction processes in Cr-substituted NV_(1.3)Cr_(0.7)P,offering insights into the application of vanadium-based materials in aqueous sodium-ion batteries.
基金the National Natural Science Foundation of China (No. 22306146)the PhD Scientific Research Startup Foundation of Xihua University (No. RX2200002003) for their financial support。
文摘To accomplish on-site separation, preconcentration and cold storage of highly volatile organic compounds(VOCs) from water samples as well as their rapid transportation to laboratory, a high-throughput miniaturized purge-and-trap(μP&T) device integrating semiconductor refrigeration storage was developed in this work. Water samples were poured into the purge vessels and purged with purified air generated by an air pump. The VOCs in water samples were then separated and preconcentrated with sorbent tubes. After their complete separation and preconcentration, the tubes were subsequently preserved in the semiconductor refrigeration unit of the μP&T device. Notably, the high integration, small size, light weight, and low power consumption of the device makes it easy to be hand-carried to the field and transport by drone from remote locations, significantly enhancing the flexibility of field sampling. The performances of the device were evaluated by comparing analytical figures of merit for the detection of four cyclic volatile methylsiloxanes(cVMSs) in water. Compared to conventional collection and preservation methods, our proposed device preserved the VOCs more consistently in the sorbent tubes, with less than 5% loss of all analytes, and maintained stability for at least 20 days at 4℃. As a proof-of-concept,10 municipal wastewater samples were pretreated using this device with recoveries ranging from 82.5% to 99.9% for the target VOCs.
基金supported by the Bayer Hemophilia Awards Program as well as the start-up fund from the College of Pharmacy at The Ohio State University.
文摘Lipid-like nanoparticles(LLNs)have been extensively explored for messenger RNA(mRNA)delivery in various biomedical applications.However,the long-term storage of these nanoparticles is still a challenge for their clinical translation.In this study,we investigated a series of conditions for the long-term storage of LLNs with encapsulation of mRNA.We evaluated the stability of LLNs with different concentrations of cryoprotectants(sucrose,trehalose or mannitol)under the conditions of freezing or lyophilization processes.Through in vitro and in vivo mRNA delivery studies,we identified the optimal storage condition,and found that the addition with 5%(w/v)sucrose or trehalose to LLNs could remain their mRNA delivery efficiency for at least three months in the liquid nitrogen storage condition.
基金Supported by the Specific Research Project of Guangxi for Research Bases and Talents (2022AC21257)。
文摘Long-term storage(LTS)can provide various services to address seasonal fluctuations in variable renewable energy by reducing energy curtailment.However,long-term unit commitment(UC)with LTS involves mixed-integer programming with large-scale coupling constraints between consecutive intervals(state-of-charge(SOC)constraint of LTS,ramping rate,and minimum up/down time constraints of thermal units),resulting in a significant computational burden.Herein,an iterative-based fast solution method is proposed to solve the long-term UC with LTS.First,the UC with coupling constraints is split into several sub problems that can be solved in parallel.Second,the solutions of the sub problems are adjusted to obtain a feasible solution that satisfies the coupling constraints.Third,a decoupling method for long-term time-series coupling constraints is proposed to determine the global optimization of the SOC of the LTS.The price-arbitrage model of the LTS determines the SOC boundary of the LTS for each sub problem.Finally,the sub problem with the SOC boundary of the LTS is iteratively solved independently.The proposed method was verified using a modified IEEE 24-bus system.The results showed that the computation time of the unit combination problem can be reduced by 97.8%,with a relative error of 3.62%.
文摘A hydrogen energy storage system(HESS)is one of the many risingmodern green innovations,using excess energy to generate hydrogen and storing it for various purposes.With that,there have been many discussions about commercializing HESS and improving it further.However,the design and sizing process can be overwhelming to comprehend with various sources to examine,and understanding optimal design methodologies is crucial to optimize a HESS design.With that,this review aims to collect and analyse a wide range of HESS studies to summarise recent studies.Two different collections of studies are studied,one was sourced by the main author for preliminary readings,and another was obtained via VOSViewer.The findings from the Web of Science platform were also examined for amore comprehensive understanding.Major findings include the People’sRepublic of China has been active in HESS research,as most works and active organizations originate from this country.HESS has been mainly researched to support power generation and balance load demands,with financial analysis being the common scope of analysis.MATLAB is a common tool used for HESS design,modelling,and optimization as it can handle complex calculations.Artificial neural network(ANN)has the potential to be used to model the HESS,but additional review is required as a formof future work.From a commercialization perspective,pressurized hydrogen tanks are ideal for hydrogen storage in a HESS,but other methods can be considered after additional research and development.From this review,it can be implied that modelling works will be the way forward for HESS research,but extensive collaborations and additional review are needed.Overall,this review summarized various takeaways that future research works on HESS can use.
