Polybutene-1(PB-1) is a semi-crystalline polymer with excellent mechanical properties. However, its practical application is significantly hindered by the slow Form Ⅱ-Ⅰ transition, which can take up to several days ...Polybutene-1(PB-1) is a semi-crystalline polymer with excellent mechanical properties. However, its practical application is significantly hindered by the slow Form Ⅱ-Ⅰ transition, which can take up to several days to complete. While prior research established that long-chain branching(LCB) structures synthesized via ω-alkenylmethyldichlorosilane copolymerization-hydrolysis(ACH) chemistry markedly accelerate this transition, this work demonstrates that H-shaped LCB structures constructed through copolymerization with 1,9-decadiene exhibit the capability to facilitate Form Ⅱ-Ⅰ transition in most systems evaluated herein. However, low branching efficiency concurrently generates extended alkyl pendant chains, which impose pronounced steric-hindrance-driven suppression on the transition kinetics, thereby substantially diminishing the net acceleration effect of the LCB structures, even resulting in a net retardation effect in certain systems. Notably, a significant synergistic acceleration effect emerged between the H-shaped LCB structures and propylene comonomer units. These findings confirm that the H-shaped LCB structures play a role in promoting the Form II-I transformation process, which is independent of the synthetic pathways, thereby providing more strategies for addressing the long-standing processing problems of PB-1.展开更多
The present study presents an assessment of the interrelations between long-chain branching,specific nucleation,and end-use properties of polypropylene blends:blends of linear polypropylene(L-PP)and long-chain branche...The present study presents an assessment of the interrelations between long-chain branching,specific nucleation,and end-use properties of polypropylene blends:blends of linear polypropylene(L-PP)and long-chain branched polypropylene(LCB-PP)modified by a specificβ-nucleating agent(NA).Specimens with various LCB-PP compositions with and without NA were prepared under complex flow fields by injection molding.Wide-angle X-ray scattering was employed to capture the X-ray patterns of both the skin and core of the specimens,determining the overall crystallinity and amounts of individual polymorphs.The increasing content of LCB-PP andγ-phase,at the same time,in the blends is reflected in both increasing crystallinity and improved mechanical properties,namely,yield stress and Young’s modulus.On the other hand,the composition of the blends had no significant effect on the impact strength,except for nucleated L-PP.It has been demonstrated that adding a relatively small amount of LCB-PP is sufficient to modify the mechanical properties of linear polypropylene.Even a very small amount of LCB-PP in the L-PP suppressed the effectiveness of NA.展开更多
Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLD...Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.展开更多
Plant height(PH),primary lateral branch length(PBL),and branch number(BN)are architectural components impacting peanut pod yield,biomass production,and adaptivity to mechanical harvesting.In this study,a recombinant i...Plant height(PH),primary lateral branch length(PBL),and branch number(BN)are architectural components impacting peanut pod yield,biomass production,and adaptivity to mechanical harvesting.In this study,a recombinant inbred population consisting of 181 individual lines was used to determine genetic controls of PH,PBL,and BN across three environments.Phenotypic data collected from the population demonstrated continuous distributions and transgressive segregation patterns.Broad-sense heritability of PH,PBL,and BN was found to be 0.87,0.88,and 0.92,respectively.Unconditional individual environmental analysis revealed 35 additive QTLs with phenotypic variation explained(PVE)ranging from 4.57 to 21.68%.A two-round meta-analysis resulted in 24consensus and 19 unique QTLs.Five unique QTLs exhibited pleiotropic effects and their genetic bases(pleiotropy or tight linkage)were evaluated.A joint analysis was performed to estimate the QTL by environment interaction(QEI)effects on PH,PBL,and BN,collectively explaining phenotypic variations of 10.80,11.02,and 7.89%,respectively.We identified 3 major and stable QTL regions(uq9-3,uq10-2,and uq16-1)on chromosomes 9,10,and 16,spanning1.43-1.53 Mb genomic regions.Candidate genes involved in phytohormones biosynthesis,signaling,and cell wall development were proposed to regulate these morphological traits.These results provide valuable information for further genetic studies and the development of molecular markers applicable to peanut architecture improvement.展开更多
Branching is a critical aspect of plant architecture that significantly impacts the yield and adaptability of staple cereal crops like rice and wheat.Cereal crops develop tillers during the vegetative stage and panicl...Branching is a critical aspect of plant architecture that significantly impacts the yield and adaptability of staple cereal crops like rice and wheat.Cereal crops develop tillers during the vegetative stage and panicle or spike branches during the reproductive stage,respectively,both of which are significantly impacted by hormones and genetic factors.Tillering and panicle branching are closely interconnected and exhibit high environmental plasticity.Here,we summarize the recent progress in genetic,hormonal,and environmental factors regulation in the branching of rice and wheat.This review not only provides a comprehensive overview of the current knowledge on branching mechanisms in rice and wheat,but also explores the prospects for future research aimed at optimizing crop architecture for enhanced productivity.展开更多
We study age-structured branching models with reproduction law depending on the remaining lifetime of the parent. The lifespan of an individual is determined at its birth and its remaining lifetime decreases at the un...We study age-structured branching models with reproduction law depending on the remaining lifetime of the parent. The lifespan of an individual is determined at its birth and its remaining lifetime decreases at the unit speed. The models, without or with immigration, are constructed as measure-valued processes by pathwise unique solutions of stochastic equations driven by time-space Poisson random measures. In the subcritical branching case, we give a sufficient condition for the ergodicity of the process with immigration. Two large number laws and a central limit theorem of the occupation times are proved.展开更多
Post-exercise whey protein isolate(WPI)supplement is beneficial for skeletal muscle recovery due to the stimulation of branched chain amino acids(BCAAs).This implies us that intake slow digestion rate of protein to su...Post-exercise whey protein isolate(WPI)supplement is beneficial for skeletal muscle recovery due to the stimulation of branched chain amino acids(BCAAs).This implies us that intake slow digestion rate of protein to sustain BCAAs releasing rate may facilitate muscle protein synthesis.To examine this hypothesis,we conducted a series of protein supplements including modified slow-digesting whey(SDW),whey,hydrolyzed whey and casein,orally to mice undergoing endurance running.Our results showed that the SDW gavage constant supplied BCAAs in the serum of mice within 6 h and significantly enhanced(P<0.01)endurance exercise capacity,compared to other groups.In addition,the SDW supplementation increased the crosssectional area of mice gastrocnemius fibers,as well as their muscle and liver glycogen content.It also increased the testosterone/cortisol ratio in serum and interleukin-6(IL-6)levels in muscle,while it decreased the tumor necrosis factor-alpha(TNF-α)levels and oxidative stress in muscle.Moreover,it may activate mechanistic target of rapamycin signaling by upregulating mRNA(bcat-1 and pgc-1α)expression.Thus,our findings illustrate that prolonged BCAAs supply duration promotes mice endurance running capacity and skeletal muscle growth,contributing to the advancement of sports nutrition practices.展开更多
This paper presents an explicit difference scheme with accuracy and branching stability for solving onedimensional parabolic type equation by the method of undetermined parameters and its truncation error is O(△t4+△...This paper presents an explicit difference scheme with accuracy and branching stability for solving onedimensional parabolic type equation by the method of undetermined parameters and its truncation error is O(△t4+△x4). The stability condition is r=a△t/△x2<1/2.展开更多
[Objective] The aim was to construct promoter of maize starch-branching enzyme sbe Ⅱb gene specifically expressed in seed.[Method] The promoter sequence of maize starch-branching enzyme sbe Ⅱb gene was amplified by ...[Objective] The aim was to construct promoter of maize starch-branching enzyme sbe Ⅱb gene specifically expressed in seed.[Method] The promoter sequence of maize starch-branching enzyme sbe Ⅱb gene was amplified by LA-PCR and then cloned into pMD18-T vector.Subsequently,the promoter was cloned into pBI121 vector to construct plant expression vector pBI121-sbe Ⅱb.Recombinant plasmid pSBE-GUS was constructed by connecting GUS gene into pBI121-sbe Ⅱb and transformed into tobacco mediated by Agrobacterium tumefaciens,before detection by PCR and Southern blot.The biochemical analysis and fluorescence detection of GUS activity were performed in different parts of the tobacco by Gene Gun Method and Agrobacterium tumefaciens transformation respectively.[Result] The homology between promoter sequence cloned in this experiment and the corresponding sequence announced in the GenBank reached 98.52%.Four transformed tobaccos were obtained by PCR and Southern blot after co-culture and selective culture.A small number of blue spots appeared in leaves,and the spots could barely been seen in the stems and roots,while a large number of blue spots were found in seeds.So,it could be concluded that the promoter of sbeⅡb gene was specifically expressed in seeds.[Conclusion] Promoter of maize starch branching enzyme sbe Ⅱb specifically expressed in seeds was successfully cloned.展开更多
The detection of long-chain branches（LCB） in polyethylene is of considerable importance as the processing properties of polyethylene are strongly affected by even a small amount of LCB. While the conventional charac...The detection of long-chain branches（LCB） in polyethylene is of considerable importance as the processing properties of polyethylene are strongly affected by even a small amount of LCB. While the conventional characterization techniques such as GPC-MALS and13 C NMR fail or take very long time to detect low content of LCB, we turn to the rheological method, which is more sensitive to LCB. In our study, we performed oscillatory shear test, creep test and stress relaxation test on two series of metallocene linear low density polyethylene（LLDPE）, revealing that the resins with LCB show higher zero-shear-rate viscosity, retarded relaxation and higher flow activation energy than those without or with less LCB. The resins with LCB showed shear thinning at very low shear rate and their zero-shear-rate viscosities were obtained via creep test. The content of LCB was quantitatively estimated from the flow activation energy. In addition, the modulus-time curves during stress relaxation of melt of the different resins obeyed the power law. The exponent of the resins with more LCB was 0.7, different from that of the resins with less LCB, around 1.7.展开更多
Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. F...Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. Fourier transform infrared spectrometer （FTIR） was applied to confirm the existence of branching and（ investigate the grafting degree for the modified PPRs. Melt flow index （MFI） and oscillatory shear rheological properties including complex viscosity, storage modulus, loss tangent and the Cole-Cole plots were studied to differentiate the LCB-PPRs from linear PPR. Differential scanning calorimetry （DSC） and polarized light microscopy （PLM） were used to study the melting and crystallization behavior and the spherulite morphology, respectively. Qualitative and quantitative analyses of rheological curves demonstrated the existence of LCB. The effect of the LCB on crystalline morphology, crystallization behavior and molecular mobility, and, thereby, the mechanical properties were studied and analyzed. Due to the entanglements between molecular chains and the nucleating effect of LCB, LCB-PPRs showed higher crystallization temperature and crystallinity, higher crystallization rate, more uniformly dispersed and much smaller crystallite compared with virgin PPR, thus giving rise to significantly improve impact strength. Moreover, the LCB-PPRs exhibited the improved yield strength. The mobility of the molecular chain segments, as demonstrated by dynamic mechanical analysis （DMA）, was improved for the modified PPRs, which also contributed to the improvement of their mechanical properties.展开更多
Microchannel heat sink with high heat transfer coefficients has been extensively investigated due to its wide application prospective in electronic cooling. However, this cooling system requires a separate pump to dri...Microchannel heat sink with high heat transfer coefficients has been extensively investigated due to its wide application prospective in electronic cooling. However, this cooling system requires a separate pump to drive the fluid transfer, which is uneasy to minimize and reduces their reliability and applicability of the whole system. In order to avoid these problems, valveless piezoelectric pump with fractal-like Y-shape branching tubes is proposed. Fractal-like Y-shape branching tube used in microchannel heat sinks is exploited as no-moving-part valve of the valveless piezoelectric pump. In order to obtain flow characteristics of the pump, the relationship between tube structure and flow rate of the pump is studied. Specifically, the flow resistances of fractal-like Y-shape branching tubes and flow rate of the pump are analyzed by using fractal theory. Then, finite element software is employed to simulate the flow field of the tube, and the relationships between pressure drop and flow rate along merging and dividing flows are obtained. Finally, valveless piezoelectric pumps with fractal-like Y-shape branching tubes with different fractal dimensions of diameter distribution are fabricated, and flow rate experiment is conducted. The experimental results show that the flow rate of the pump increases with the rise of fractal dimension of the tube diameter. When fractal dimension is 3, the maximum flow rate of the valveless pump is 29.16 mL/min under 100 V peak to peak （13 Hz） power supply, which reveals the relationship between flow rate and fractal dimensions of tube diameter distribution. This paper investigates the flow characteristics of valveless piezoelectric pump with fractal-like Y-shape branching tubes, which provides certain references for valveless piezoelectric pump with fractal-like Y-shape branching tubes in application on electronic chip cooling.展开更多
We consider a branching random walk in an independent and identically distributed random environment ξ=(ξn) indexed by the time. Let W be the limit of the martingale Wn=∫e^-txZn(dx)/Eξ∫e^-txZn(dx), with Zn denoti...We consider a branching random walk in an independent and identically distributed random environment ξ=(ξn) indexed by the time. Let W be the limit of the martingale Wn=∫e^-txZn(dx)/Eξ∫e^-txZn(dx), with Zn denoting the counting measure of particles of generation n, and Eξ the conditional expectation given the environment ξ. We find necessary and sufficient conditions for the existence of quenched moments and weighted moments of W, when W is non-degenerate.展开更多
We consider a branching random walk with a random environment m time, in which the offspring distribution of a particle of generation n and the distribution of the displacements of its children depend on an environmen...We consider a branching random walk with a random environment m time, in which the offspring distribution of a particle of generation n and the distribution of the displacements of its children depend on an environment indexed by the time n. The envi- ronment is supposed to be independent and identically distributed. For A C R, let Zn（A） be the number of particles of generation n located in A. We show central limit theorems for the counting measure Zn （-） with appropriate normalization.展开更多
Spatial and temporal expression patterns of Sbel and Sbe2 that encode starch branching enzyme （SBE） Ⅰ and Ⅱ, respectively, in sweet potato （Ipomoea batatas L.） were analyzed. Expression of both genes in Escheric...Spatial and temporal expression patterns of Sbel and Sbe2 that encode starch branching enzyme （SBE） Ⅰ and Ⅱ, respectively, in sweet potato （Ipomoea batatas L.） were analyzed. Expression of both genes in Escherichia coli indicate that both genes encoded active SBE. Analysis with real-time quantitative polymerase chain reaction technique indicates that IbSbel mRNA was expressed at very low levels in leaves but was the predominant isoform in tuberous root while the reverse case was found for lbSbe2. The expression pattern of IbSbel, closely resembles that of AGPase S, a gene coding for one of the subunits ofADP-glucose pyrophosphorylase, which is the key regulatory enzyme in the starch biosynthetic pathway. Western analysis detected at least two isoforms of SBE I in tuberous roots, those two isoforms showed adverse expression patterns with the development of the tuberous roots. Expression of the two IbSbe genes exhibited a diurnal rhythm during a 12-h cycle when fed a continuous solution of sucrose. Abscisic acid （ABA） was aother potent inducer of IbSbe expression, but bypassed the semidian oscillator.展开更多
Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallizationtechnique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branch...Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallizationtechnique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branching distributionwas also characterized by a continuous slow cooling crystallization, followed by a melting analysis scan. Four differentpolyethylenes were studied: Ziegler-Natta gas phase, Ziegler-Natta solution, metallocene, constrained-geometry single sitecatalyzed polyethylenes. The branching distribution was calculated from a calibration of branch content with meltingtemperature. The lamellar thickness was calculated based on the thermodynamic melting temperature of each polyethyleneand the surface free energy of the crystal face. The branching distribution and lamellar thickness distribution were used tocalculate weight average branch content, mean lamellar thickness, and a branch dispersity index. The results for the branchcontent were in good agreement with the known comonomer content of the polyethylenes. A limitation was that high branchcontent polyethylenes did not reach their potential crystallization at ambient temperatures. Cooling to sub-ambient wasnecessary to equilibrate the crystallization, but melting temperature versus branch content was not applicable after cooling tobelow ambient because the calibration data were not performed in this way.展开更多
The concepts of branching chain in random environmnet and canonical branching chain in random environment are introduced.Moreover the existence of these chains is proved.Finally the exact formulas of mathematical expe...The concepts of branching chain in random environmnet and canonical branching chain in random environment are introduced.Moreover the existence of these chains is proved.Finally the exact formulas of mathematical expectation and variance of branching chain in random environment are also given.展开更多
Photodissociation of jet-cooled HOD via the C state around 124 nm has been studied using the H（D）-atom Rydberg tagging time-of-flight technique. Rotational state resolved action spectrum and the product translationa...Photodissociation of jet-cooled HOD via the C state around 124 nm has been studied using the H（D）-atom Rydberg tagging time-of-flight technique. Rotational state resolved action spectrum and the product translational energy distribution spectra have been recorded for both D＋OH and H＋OD dissociation channels. Product channel OH/OD branching ratios for the individual C-X rotational transition have been determined. A comparison is also given with the B-X and A-X transitions. In addition, the dissociation energy of the OD bond in HOD has been determined accurately to be 41751.3±5 cm-1.展开更多
Dendritic branching patterns at variable cross-sections in Ni-based single crystal(SX) castings of different generations were investigated using optical microscope(OM), electro probe microanalyzer(EPMA),differential s...Dendritic branching patterns at variable cross-sections in Ni-based single crystal(SX) castings of different generations were investigated using optical microscope(OM), electro probe microanalyzer(EPMA),differential scanning calorimeter(DSC), Thermo-Cal software and Pro-CAST software. Results show that the dendritic branching patterns are similar in outward platform in SXs of different generations. That is, the primary dendrites(PDs) are introduced into the platform by developing a series of secondary dendrites(SDs) to occupy the bottom of the platform, and the ternary dendrites(TDs) originating from these SDs grow upward to fill up the platform. With the SX generation increasing, the undercooling of melts in the inward platform increases significantly due to the increasing alloying elements and the segregation in the directional solidification(DS)process, and the growth velocity of the dendrite tip increases according to the dynamic model of dendrite growth,which is beneficial for the high-order dendrite development. The stronger dendritic branching ability is shown in the inward platform of the higher generation Ni-based SX.展开更多
The rheological behavior, thermal properties and foam morphology of linear polypropylene and long chain branching polypropylene prepared through UV irradiation reactive extrusion were studied by rheological test, melt...The rheological behavior, thermal properties and foam morphology of linear polypropylene and long chain branching polypropylene prepared through UV irradiation reactive extrusion were studied by rheological test, melt index test, DSC and supercritical carbon dioxide foaming technology. Rheological test and melt index test confirmed that under UV irradiation and extrusion, adding photo-initiator and cross- linking agent could achieve the purpose of branching, thus improved the melt strength of polypropylene effectively. The DSC results revealed that with the introducing of long chain branching, the melting range of the polypropylene broadened and the crystallization temperature increased. Owing to the introduction of long chain branches, polypropylene exhibited higher melt strength and strain hardening behavior. Compared with linear polypropylene, the foam morphologies of long chain branching polypropylene were more uniform.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 52173013 and 52373015)。
文摘Polybutene-1(PB-1) is a semi-crystalline polymer with excellent mechanical properties. However, its practical application is significantly hindered by the slow Form Ⅱ-Ⅰ transition, which can take up to several days to complete. While prior research established that long-chain branching(LCB) structures synthesized via ω-alkenylmethyldichlorosilane copolymerization-hydrolysis(ACH) chemistry markedly accelerate this transition, this work demonstrates that H-shaped LCB structures constructed through copolymerization with 1,9-decadiene exhibit the capability to facilitate Form Ⅱ-Ⅰ transition in most systems evaluated herein. However, low branching efficiency concurrently generates extended alkyl pendant chains, which impose pronounced steric-hindrance-driven suppression on the transition kinetics, thereby substantially diminishing the net acceleration effect of the LCB structures, even resulting in a net retardation effect in certain systems. Notably, a significant synergistic acceleration effect emerged between the H-shaped LCB structures and propylene comonomer units. These findings confirm that the H-shaped LCB structures play a role in promoting the Form II-I transformation process, which is independent of the synthetic pathways, thereby providing more strategies for addressing the long-standing processing problems of PB-1.
文摘The present study presents an assessment of the interrelations between long-chain branching,specific nucleation,and end-use properties of polypropylene blends:blends of linear polypropylene(L-PP)and long-chain branched polypropylene(LCB-PP)modified by a specificβ-nucleating agent(NA).Specimens with various LCB-PP compositions with and without NA were prepared under complex flow fields by injection molding.Wide-angle X-ray scattering was employed to capture the X-ray patterns of both the skin and core of the specimens,determining the overall crystallinity and amounts of individual polymorphs.The increasing content of LCB-PP andγ-phase,at the same time,in the blends is reflected in both increasing crystallinity and improved mechanical properties,namely,yield stress and Young’s modulus.On the other hand,the composition of the blends had no significant effect on the impact strength,except for nucleated L-PP.It has been demonstrated that adding a relatively small amount of LCB-PP is sufficient to modify the mechanical properties of linear polypropylene.Even a very small amount of LCB-PP in the L-PP suppressed the effectiveness of NA.
基金financially supported by the Science and Technology Project of PetroChina Company Limited,China(No.2022DJ6314)the National Natural Science Foundation of China(No.52173056)。
文摘Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.
基金supported by the Natural Science Foundation of Shandong Province,China(ZR2022MC045)the National Natural Science Foundation of China(32001584,32201876)+2 种基金the Major Science and Technology Program of Xinjiang Uygur Autonomous Region,China(2022A02008-3)the Breeding Project from Department of Science&Technology of Shandong Province,China(2022LZGC007)the Agricultural Scientific and the Technological Innovation Project of Shandong Academy of Agricultural Sciences,China(CXGC2023A06,CXGC2023A39 and CXGC2023A46),and the Major Scientific and Technological Achievements Cultivation Program of Shandong Academy of Agricultural Sciences,China(CXGC2025E02)。
文摘Plant height(PH),primary lateral branch length(PBL),and branch number(BN)are architectural components impacting peanut pod yield,biomass production,and adaptivity to mechanical harvesting.In this study,a recombinant inbred population consisting of 181 individual lines was used to determine genetic controls of PH,PBL,and BN across three environments.Phenotypic data collected from the population demonstrated continuous distributions and transgressive segregation patterns.Broad-sense heritability of PH,PBL,and BN was found to be 0.87,0.88,and 0.92,respectively.Unconditional individual environmental analysis revealed 35 additive QTLs with phenotypic variation explained(PVE)ranging from 4.57 to 21.68%.A two-round meta-analysis resulted in 24consensus and 19 unique QTLs.Five unique QTLs exhibited pleiotropic effects and their genetic bases(pleiotropy or tight linkage)were evaluated.A joint analysis was performed to estimate the QTL by environment interaction(QEI)effects on PH,PBL,and BN,collectively explaining phenotypic variations of 10.80,11.02,and 7.89%,respectively.We identified 3 major and stable QTL regions(uq9-3,uq10-2,and uq16-1)on chromosomes 9,10,and 16,spanning1.43-1.53 Mb genomic regions.Candidate genes involved in phytohormones biosynthesis,signaling,and cell wall development were proposed to regulate these morphological traits.These results provide valuable information for further genetic studies and the development of molecular markers applicable to peanut architecture improvement.
基金funded by grants from the National Natural Science Foundation of China (31930006 to Y.W.)the National Key Research and Development Program of China (2022YFF1002903 to Y.W.)+1 种基金the Top Talents Program “One Case One Discussion”(Yishiyiyi to Y.W.)from Shandong provinceShandong Agricultural University Talent Introduction Start-up Fund (to N.Z.)
文摘Branching is a critical aspect of plant architecture that significantly impacts the yield and adaptability of staple cereal crops like rice and wheat.Cereal crops develop tillers during the vegetative stage and panicle or spike branches during the reproductive stage,respectively,both of which are significantly impacted by hormones and genetic factors.Tillering and panicle branching are closely interconnected and exhibit high environmental plasticity.Here,we summarize the recent progress in genetic,hormonal,and environmental factors regulation in the branching of rice and wheat.This review not only provides a comprehensive overview of the current knowledge on branching mechanisms in rice and wheat,but also explores the prospects for future research aimed at optimizing crop architecture for enhanced productivity.
基金supported by the National Key R&D Program of China(2020YFA0712901).
文摘We study age-structured branching models with reproduction law depending on the remaining lifetime of the parent. The lifespan of an individual is determined at its birth and its remaining lifetime decreases at the unit speed. The models, without or with immigration, are constructed as measure-valued processes by pathwise unique solutions of stochastic equations driven by time-space Poisson random measures. In the subcritical branching case, we give a sufficient condition for the ergodicity of the process with immigration. Two large number laws and a central limit theorem of the occupation times are proved.
基金financially supported by the Fundamental Research Funds for the Central Universities(JUSRP622014)Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province,Jiangnan University(2022-3-2)National Key Research and Development Program of China(2022YFF1100300).
文摘Post-exercise whey protein isolate(WPI)supplement is beneficial for skeletal muscle recovery due to the stimulation of branched chain amino acids(BCAAs).This implies us that intake slow digestion rate of protein to sustain BCAAs releasing rate may facilitate muscle protein synthesis.To examine this hypothesis,we conducted a series of protein supplements including modified slow-digesting whey(SDW),whey,hydrolyzed whey and casein,orally to mice undergoing endurance running.Our results showed that the SDW gavage constant supplied BCAAs in the serum of mice within 6 h and significantly enhanced(P<0.01)endurance exercise capacity,compared to other groups.In addition,the SDW supplementation increased the crosssectional area of mice gastrocnemius fibers,as well as their muscle and liver glycogen content.It also increased the testosterone/cortisol ratio in serum and interleukin-6(IL-6)levels in muscle,while it decreased the tumor necrosis factor-alpha(TNF-α)levels and oxidative stress in muscle.Moreover,it may activate mechanistic target of rapamycin signaling by upregulating mRNA(bcat-1 and pgc-1α)expression.Thus,our findings illustrate that prolonged BCAAs supply duration promotes mice endurance running capacity and skeletal muscle growth,contributing to the advancement of sports nutrition practices.
文摘This paper presents an explicit difference scheme with accuracy and branching stability for solving onedimensional parabolic type equation by the method of undetermined parameters and its truncation error is O(△t4+△x4). The stability condition is r=a△t/△x2<1/2.
基金Supported by National Center of Transgenic Plant Research and Commercialization Special Fund(J99-13-001)Jilin Agricultural Science & Technology College Fund~~
文摘[Objective] The aim was to construct promoter of maize starch-branching enzyme sbe Ⅱb gene specifically expressed in seed.[Method] The promoter sequence of maize starch-branching enzyme sbe Ⅱb gene was amplified by LA-PCR and then cloned into pMD18-T vector.Subsequently,the promoter was cloned into pBI121 vector to construct plant expression vector pBI121-sbe Ⅱb.Recombinant plasmid pSBE-GUS was constructed by connecting GUS gene into pBI121-sbe Ⅱb and transformed into tobacco mediated by Agrobacterium tumefaciens,before detection by PCR and Southern blot.The biochemical analysis and fluorescence detection of GUS activity were performed in different parts of the tobacco by Gene Gun Method and Agrobacterium tumefaciens transformation respectively.[Result] The homology between promoter sequence cloned in this experiment and the corresponding sequence announced in the GenBank reached 98.52%.Four transformed tobaccos were obtained by PCR and Southern blot after co-culture and selective culture.A small number of blue spots appeared in leaves,and the spots could barely been seen in the stems and roots,while a large number of blue spots were found in seeds.So,it could be concluded that the promoter of sbeⅡb gene was specifically expressed in seeds.[Conclusion] Promoter of maize starch branching enzyme sbe Ⅱb specifically expressed in seeds was successfully cloned.
基金supported by the National Natural Science Foundation of China (No. 21374054)the Sino-GermanCenter for Research Promotion
文摘The detection of long-chain branches（LCB） in polyethylene is of considerable importance as the processing properties of polyethylene are strongly affected by even a small amount of LCB. While the conventional characterization techniques such as GPC-MALS and13 C NMR fail or take very long time to detect low content of LCB, we turn to the rheological method, which is more sensitive to LCB. In our study, we performed oscillatory shear test, creep test and stress relaxation test on two series of metallocene linear low density polyethylene（LLDPE）, revealing that the resins with LCB show higher zero-shear-rate viscosity, retarded relaxation and higher flow activation energy than those without or with less LCB. The resins with LCB showed shear thinning at very low shear rate and their zero-shear-rate viscosities were obtained via creep test. The content of LCB was quantitatively estimated from the flow activation energy. In addition, the modulus-time curves during stress relaxation of melt of the different resins obeyed the power law. The exponent of the resins with more LCB was 0.7, different from that of the resins with less LCB, around 1.7.
基金financially supported by the Foundation for Development of Science and Technology of Fuzhou University(No.2011-XY-1)
文摘Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. Fourier transform infrared spectrometer （FTIR） was applied to confirm the existence of branching and（ investigate the grafting degree for the modified PPRs. Melt flow index （MFI） and oscillatory shear rheological properties including complex viscosity, storage modulus, loss tangent and the Cole-Cole plots were studied to differentiate the LCB-PPRs from linear PPR. Differential scanning calorimetry （DSC） and polarized light microscopy （PLM） were used to study the melting and crystallization behavior and the spherulite morphology, respectively. Qualitative and quantitative analyses of rheological curves demonstrated the existence of LCB. The effect of the LCB on crystalline morphology, crystallization behavior and molecular mobility, and, thereby, the mechanical properties were studied and analyzed. Due to the entanglements between molecular chains and the nucleating effect of LCB, LCB-PPRs showed higher crystallization temperature and crystallinity, higher crystallization rate, more uniformly dispersed and much smaller crystallite compared with virgin PPR, thus giving rise to significantly improve impact strength. Moreover, the LCB-PPRs exhibited the improved yield strength. The mobility of the molecular chain segments, as demonstrated by dynamic mechanical analysis （DMA）, was improved for the modified PPRs, which also contributed to the improvement of their mechanical properties.
基金Supported by National Natural Science Foundation of China(Grant Nos.51275235,51375227)Major Research Plan of National Natural Science Foundation of China(Grant No.91223201)Independent Projects Fund of State Key Lab of Mechanics and Control of Mechanical Structures of China(Grant No.0313G01)
文摘Microchannel heat sink with high heat transfer coefficients has been extensively investigated due to its wide application prospective in electronic cooling. However, this cooling system requires a separate pump to drive the fluid transfer, which is uneasy to minimize and reduces their reliability and applicability of the whole system. In order to avoid these problems, valveless piezoelectric pump with fractal-like Y-shape branching tubes is proposed. Fractal-like Y-shape branching tube used in microchannel heat sinks is exploited as no-moving-part valve of the valveless piezoelectric pump. In order to obtain flow characteristics of the pump, the relationship between tube structure and flow rate of the pump is studied. Specifically, the flow resistances of fractal-like Y-shape branching tubes and flow rate of the pump are analyzed by using fractal theory. Then, finite element software is employed to simulate the flow field of the tube, and the relationships between pressure drop and flow rate along merging and dividing flows are obtained. Finally, valveless piezoelectric pumps with fractal-like Y-shape branching tubes with different fractal dimensions of diameter distribution are fabricated, and flow rate experiment is conducted. The experimental results show that the flow rate of the pump increases with the rise of fractal dimension of the tube diameter. When fractal dimension is 3, the maximum flow rate of the valveless pump is 29.16 mL/min under 100 V peak to peak （13 Hz） power supply, which reveals the relationship between flow rate and fractal dimensions of tube diameter distribution. This paper investigates the flow characteristics of valveless piezoelectric pump with fractal-like Y-shape branching tubes, which provides certain references for valveless piezoelectric pump with fractal-like Y-shape branching tubes in application on electronic chip cooling.
基金benefited from the support of the French government Investissements d’Avenir program ANR-11-LABX-0020-01partially supported by the National Natural Science Foundation of China(11571052,11401590,11731012 and 11671404)by Hunan Natural Science Foundation(2017JJ2271)
文摘We consider a branching random walk in an independent and identically distributed random environment ξ=(ξn) indexed by the time. Let W be the limit of the martingale Wn=∫e^-txZn(dx)/Eξ∫e^-txZn(dx), with Zn denoting the counting measure of particles of generation n, and Eξ the conditional expectation given the environment ξ. We find necessary and sufficient conditions for the existence of quenched moments and weighted moments of W, when W is non-degenerate.
基金partially supported by the National Natural Science Foundation of China(NSFC,11101039,11171044,11271045)a cooperation program between NSFC and CNRS of France(11311130103)+1 种基金the Fundamental Research Funds for the Central UniversitiesHunan Provincial Natural Science Foundation of China(11JJ2001)
文摘We consider a branching random walk with a random environment m time, in which the offspring distribution of a particle of generation n and the distribution of the displacements of its children depend on an environment indexed by the time n. The envi- ronment is supposed to be independent and identically distributed. For A C R, let Zn（A） be the number of particles of generation n located in A. We show central limit theorems for the counting measure Zn （-） with appropriate normalization.
基金supported by funds from the National Science & Technology Pillar Program of China(2007BAD78B03)the 11th Five-Year Plan Key Project of Sichuan Province, China (07SG111-003-1)
文摘Spatial and temporal expression patterns of Sbel and Sbe2 that encode starch branching enzyme （SBE） Ⅰ and Ⅱ, respectively, in sweet potato （Ipomoea batatas L.） were analyzed. Expression of both genes in Escherichia coli indicate that both genes encoded active SBE. Analysis with real-time quantitative polymerase chain reaction technique indicates that IbSbel mRNA was expressed at very low levels in leaves but was the predominant isoform in tuberous root while the reverse case was found for lbSbe2. The expression pattern of IbSbel, closely resembles that of AGPase S, a gene coding for one of the subunits ofADP-glucose pyrophosphorylase, which is the key regulatory enzyme in the starch biosynthetic pathway. Western analysis detected at least two isoforms of SBE I in tuberous roots, those two isoforms showed adverse expression patterns with the development of the tuberous roots. Expression of the two IbSbe genes exhibited a diurnal rhythm during a 12-h cycle when fed a continuous solution of sucrose. Abscisic acid （ABA） was aother potent inducer of IbSbe expression, but bypassed the semidian oscillator.
文摘Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallizationtechnique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branching distributionwas also characterized by a continuous slow cooling crystallization, followed by a melting analysis scan. Four differentpolyethylenes were studied: Ziegler-Natta gas phase, Ziegler-Natta solution, metallocene, constrained-geometry single sitecatalyzed polyethylenes. The branching distribution was calculated from a calibration of branch content with meltingtemperature. The lamellar thickness was calculated based on the thermodynamic melting temperature of each polyethyleneand the surface free energy of the crystal face. The branching distribution and lamellar thickness distribution were used tocalculate weight average branch content, mean lamellar thickness, and a branch dispersity index. The results for the branchcontent were in good agreement with the known comonomer content of the polyethylenes. A limitation was that high branchcontent polyethylenes did not reach their potential crystallization at ambient temperatures. Cooling to sub-ambient wasnecessary to equilibrate the crystallization, but melting temperature versus branch content was not applicable after cooling tobelow ambient because the calibration data were not performed in this way.
基金Supported by NNSF of china(10371092)the Foundation of Wuhan University
文摘The concepts of branching chain in random environmnet and canonical branching chain in random environment are introduced.Moreover the existence of these chains is proved.Finally the exact formulas of mathematical expectation and variance of branching chain in random environment are also given.
基金ACKNOWLEDGMENTS This work was supported by the Chinese Academy of Sciences, the Ministry of Science and Technology, and the National Natural Science Foundation of China.
文摘Photodissociation of jet-cooled HOD via the C state around 124 nm has been studied using the H（D）-atom Rydberg tagging time-of-flight technique. Rotational state resolved action spectrum and the product translational energy distribution spectra have been recorded for both D＋OH and H＋OD dissociation channels. Product channel OH/OD branching ratios for the individual C-X rotational transition have been determined. A comparison is also given with the B-X and A-X transitions. In addition, the dissociation energy of the OD bond in HOD has been determined accurately to be 41751.3±5 cm-1.
基金financially supported by the National Key Research and Development Program of China(No.2017YFB0702904)the National Natural Science Foundation of China(No.51631008)
文摘Dendritic branching patterns at variable cross-sections in Ni-based single crystal(SX) castings of different generations were investigated using optical microscope(OM), electro probe microanalyzer(EPMA),differential scanning calorimeter(DSC), Thermo-Cal software and Pro-CAST software. Results show that the dendritic branching patterns are similar in outward platform in SXs of different generations. That is, the primary dendrites(PDs) are introduced into the platform by developing a series of secondary dendrites(SDs) to occupy the bottom of the platform, and the ternary dendrites(TDs) originating from these SDs grow upward to fill up the platform. With the SX generation increasing, the undercooling of melts in the inward platform increases significantly due to the increasing alloying elements and the segregation in the directional solidification(DS)process, and the growth velocity of the dendrite tip increases according to the dynamic model of dendrite growth,which is beneficial for the high-order dendrite development. The stronger dendritic branching ability is shown in the inward platform of the higher generation Ni-based SX.
基金Funded by the National Natural Science Foundation of China(No.51103091)Scientific Research Foundation for the Returned Overseas Chinese Scholars State Education Ministry(No.20101174-4-3)the Opening Project of the Key Laboratory of Polymer Processing Engineering,Ministry of Education,China and the Fundamental Research Funds for the Central Universities(No.2012ZM0074)
文摘The rheological behavior, thermal properties and foam morphology of linear polypropylene and long chain branching polypropylene prepared through UV irradiation reactive extrusion were studied by rheological test, melt index test, DSC and supercritical carbon dioxide foaming technology. Rheological test and melt index test confirmed that under UV irradiation and extrusion, adding photo-initiator and cross- linking agent could achieve the purpose of branching, thus improved the melt strength of polypropylene effectively. The DSC results revealed that with the introducing of long chain branching, the melting range of the polypropylene broadened and the crystallization temperature increased. Owing to the introduction of long chain branches, polypropylene exhibited higher melt strength and strain hardening behavior. Compared with linear polypropylene, the foam morphologies of long chain branching polypropylene were more uniform.
