Two-dimensional transition metal dichalcogenides(2D TMDCs)have received considerable attention in local strain engineering due to their extraordinary mechanical flexibility,electonic structure,and optical properties.T...Two-dimensional transition metal dichalcogenides(2D TMDCs)have received considerable attention in local strain engineering due to their extraordinary mechanical flexibility,electonic structure,and optical properties.The strain-induced out-of-plane deformations in 2D TMDCs lead to diverse excitonic behaviors and versatile modulations in optical properties,paving the way for the development of advanced quantum technologies,flexible optoelectronic materials,and straintronic devices.Research on local strain engineering on 2D TMDCs has been delved into fabrication techniques,electronic state variations,and quantum optical applications.This review begins by summarizing the state-of-the-art methods for introducing local strain into 2D TMDCs,followed by an exploration of the impact of local strain engineering on optical properties.The intriguing phenomena resulting from local strain,such as exciton funnelling and anti-funnelling,are also discussed.We then shift the focus to the application of locally strained 2D TMDCs as quantum emitters,with various strategies outlined for modulating the properties of TMDC-based quantum emitters.Finally,we discuss the remaining questions in this field and provide an outlook on the future of local strain engineering on 2D TMDCs.展开更多
Detection of local strain at the nanometer scale with high sensitivity remains challenging.Here we report near-field infrared nano-imaging of local strains in bilayer graphene by probing strain-induced shifts of phono...Detection of local strain at the nanometer scale with high sensitivity remains challenging.Here we report near-field infrared nano-imaging of local strains in bilayer graphene by probing strain-induced shifts of phonon frequency.As a non-polar crystal,intrinsic bilayer graphene possesses little infrared response at its transverse optical phonon frequency.The reported optical detection of local strain is enabled by applying a vertical electrical field that breaks the symmetry of the two graphene layers and introduces finite electrical dipole moment to graphene phonon.The activated phonon further interacts with continuum electronic transitions,and generates a strong Fano resonance.The resulted Fano resonance features a very sharp near-field infrared scattering peak,which leads to an extraordinary sensitivity of-0.002%for the strain detection.Our results demonstrate the first nano-scale near-field Fano resonance,provide a new way to probe local strains with high sensitivity in non-polar crystals,and open exciting possibilities for studying strain-induced rich phenomena.展开更多
We reported a low-cost and easy-to-make method to effectively generate quantum dot(QD)states in 2D hBN films for quantum emissions at room temperature by utilizing silica nanospheres,in comparison with the sophisticat...We reported a low-cost and easy-to-make method to effectively generate quantum dot(QD)states in 2D hBN films for quantum emissions at room temperature by utilizing silica nanospheres,in comparison with the sophisticated nanofabrication method reported in previous studies.The QDs created in 2D hBN films using silica nanospheres exhibit pronounced photon emissions with a good photo-stability in air,a narrow distribution of the emission peaks within the range of 580-620 nm,and a directional emission pattern,behaving as a single electric dipole.Our work develops the method of controllable fabrication of quantum emitters in 2D materials by using nano materials and structures.展开更多
A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relax...A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.展开更多
To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-r...To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.展开更多
Welded joints can be divided into different material zones,with considerable variation of material properties around the weld toe.The material inhomogeneity influences the local stress and strain of welded joints unde...Welded joints can be divided into different material zones,with considerable variation of material properties around the weld toe.The material inhomogeneity influences the local stress and strain of welded joints under monotonic and cyclic loading.This study aims to examine the local stress and strain characteristics of welded joints considering material inhomogeneity.Numerical models with various material zones were developed,and material properties were determined based on hardness.Smooth specimen models were used to analyze stress and strain distributions excluding notch effects.A detailed inhomogeneous model of a welded joint was established based on extensive microhardness measurements around the weld toe and the Kriging interpolation method.Additionally,a homogeneous model and a simplified inhomogeneous model,based on limited measured data,were generated and compared with the detailed inhomogeneous model.Fatigue life was estimated using the Smith,Watson,and Topper method based on the obtained stress and strain.For smooth specimen models,stress concentration occurs at a location where the strain is not significant,and fatigue cracks were most likely to initiate from the base metal.Results from the two simplified models showed deviations from those of the detailed inhomogeneous model,and the limitations of these simplified models are discussed.展开更多
The study of rock failure mechanisms is fundamental to geotechnical engineering,as it enhances design quality and mitigates disaster risks.This research employed in situ compression tests on 3D-printed rocklike sample...The study of rock failure mechanisms is fundamental to geotechnical engineering,as it enhances design quality and mitigates disaster risks.This research employed in situ compression tests on 3D-printed rocklike samples with a single flaw,combining Micro-CT scans and a specialized loading device to analyze their behavior.Mechanical properties and failure modes of these printed samples were compared to those of natural flawed sandstones,demonstrating the capability of 3D printing to replicate natural rock characteristics.By reconstructing 3D crack evolution from 2D CT images and applying digital volume correlation(DVC),the study visualized internal strain fields and established a relationship between strain patterns and rock failure.The results reveal that crack initiation consistently occurs at the flaw,advancing into tensile and secondary shear or mixed cracks.For flaw angles(α)ranging from 0°to 45°,the 3D-printed samples exhibited a higher number of newly formed cracks and a faster increase in crack volume with strain.In contrast,for flaw angles of 45°≤α≤90°,the opposite trend was observed.The internal strain field exhibited significant strain localization,with this uneven distribution playing a critical role in sample failure.When the flaw angle was in the range of 0°≤α≤30°,failure was primarily driven by tensile cracks,forming distinct tensile bands.Conversely,for 30°<α≤90°,a combination of tensile and shear cracks dominated the failure,producing both shear and tensile bands in the sample.Additionally,the strain field component ε_(yy) showed a strong correlation with the evolution of internal damage,providing valuable insights into the underlying rock failure mechanisms.展开更多
Laser-welded Ti-6Al-4 V is prone to severe residual stresses,microstructural variation,and structural de-fects which are known detrimental to the mechanical properties of weld joints.Residual stress removal is typical...Laser-welded Ti-6Al-4 V is prone to severe residual stresses,microstructural variation,and structural de-fects which are known detrimental to the mechanical properties of weld joints.Residual stress removal is typically applied to weld joints for engineering purposes via heat treatment,in order to avoid prema-ture failure and performance degradation.In the present work,we found that proper welding residual stresses in laser-welded Ti-6Al-4 V sheets can maintain better ductility during uniaxial tension,as op-posed to the stress-relieved counterparts.A detailed experimental investigation has been performed on the deformation behaviours of Ti-6Al-4 V butt welds,including residual stress distribution characteriza-tions by focused ion beam ring-coring coupled with digital image correlation(FIB-DIC),X-ray comput-erized tomography(CT)for internal voids,and in-situ DIC analysis of the subregional strain evolutions.It was found that the pores preferentially distributed near the fusion zone(FZ)boundary,where the compressive residual stress was up to-330 MPa.The removal of residual stress resulted in a changed failure initiation site from the base material to the FZ boundary,the former with ductile and the latter with brittle fracture characteristics under tensile deformation.The combined effects of residual stresses,microstructures,and internal pores on the mechanical responses are discussed in detail.This work high-lights the importance of inevitable residual stress and pores in laser weld pieces,leading to key insights for post-welding treatment and service performance evaluations.展开更多
Cyclic deformation behavior of friction-stir-welded dissimilar AA2024-T351 to AA7075-T65 aluminum alloy joints was evaluated via stepwise tests at different strain rates,along with transmission electron microscopy exa...Cyclic deformation behavior of friction-stir-welded dissimilar AA2024-T351 to AA7075-T65 aluminum alloy joints was evaluated via stepwise tests at different strain rates,along with transmission electron microscopy examinations to characterize the precipitates required to assess internal stresses.Electron backscatter diffraction was employed to observe the inhomogeneous microstructures of the FSWed joints.Strain localization appeared in the heat affected zone(HAZ)of AA2024 side.After cyclic deformation of 500 cycles at a total strain amplitude of 0.5%,the strength of the dissimilar joints resumed basically to that of AA2024 base material.And the AA2024 HAZ was obviously hardened,which should be attributed to the introduced dislocations during cyclic deformation process.Cyclic hardening capacity of the joints increased with decreasing strain rate.展开更多
To address the problems of strain localization, the exact Mohr-Coulomb (MC) model is used based on second-order cone programming (mpcFEM-SOCP) in the framework of micropolar continuum finite element method. Using the ...To address the problems of strain localization, the exact Mohr-Coulomb (MC) model is used based on second-order cone programming (mpcFEM-SOCP) in the framework of micropolar continuum finite element method. Using the uniaxial compression test, we focused on the earth pressure problem of rigid wall segment involving non-associated plasticity. The numerical results reveal that when mpcFEM-SOCP is applied, the problems of mesh dependency can be effectively addressed. For geotechnical strain localization analysis involving non-associated MC plasticity, mpcFEM-SOCP in conjunction with the pseudo-time discrete scheme can improve the numerical stability and avoid the unreasonable softening issue in the pressure-displacement curves, which may be encountered in the conventional FEM. It also shows that the pressure-displacement responses calculated by mpcFEM-SOCP with the pseudo-time discrete scheme are higher than those calculated by mpcFEM-SOCP with the Davis scheme. The inclination angle of shear band predicted by mpcFEM-SOCP with the pseudo-time discrete scheme agrees well with the theoretical solution of non-associated MC plasticity.展开更多
The coupling effects of the metastable austenitic phase and the amorphous matrix in a transformation-induced plasticity(TRIP)-reinforced bulk metallic glass(BMG)composite under compressive loading were investigated by...The coupling effects of the metastable austenitic phase and the amorphous matrix in a transformation-induced plasticity(TRIP)-reinforced bulk metallic glass(BMG)composite under compressive loading were investigated by employing the digital image correlation(DIC)technique.The evolution of local strain field in the crystalline phase and the amorphous matrix was directly monitored,and the contribution from the phase transformation of the metastable austenitic phase was revealed.Local shear strain was found to be effectively consumed by the displacive phase transformation of the metastable austenitic phase,which relaxed the local strain/stress concentration at the interface and thus greatly enhanced the plasticity of the TRIP-reinforced BMG composites.Our current study sheds light on in-depth understanding of the underlying deformation mechanism and the interplay between the amorphous matrix and the metastable crystalline phase during deformation,which is helpful for design of advanced BMG composites with further improved properties.展开更多
Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain app...Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.展开更多
Using elastic crystalline viscoplastic finite element (FE) annlysis, the formability of BCC steel sheets was assessed. An orientation probability assignment method in the FE modeling procedure, which can be categorize...Using elastic crystalline viscoplastic finite element (FE) annlysis, the formability of BCC steel sheets was assessed. An orientation probability assignment method in the FE modeling procedure, which can be categorized as an inhomogenized material modeling, was newly proposed. In the study, the crystal orientations of three materials, mild steel, dual phase steel and the high strength steel, were obtained by Xray diffraction and orientation distribution function (ODF) analyses. The measured ODF results have revealed clearly different textures in the sheets, featured by orientation fibers, skeleton lines and selected orientations in Euler angle space, which are closely related to the plastic anisotropy. Then, the crystal orientations were assigned to FE integration points by using this ODF data, individually. The FE analyses of the standard limiting dome height (LDH) test show how the fiber textures affect the extent of strain localization in the forming processes. It was confirmed by comparison with experimental results that this FE code could predict the extreme strain localization and assess the sheet formability.展开更多
Based on governing equations of saturated porous media and Liapunov＇ s stability here, onset conditions matrix of porous media used by solid stress and Terzaghi＇s effective stress constitutive description under seep...Based on governing equations of saturated porous media and Liapunov＇ s stability here, onset conditions matrix of porous media used by solid stress and Terzaghi＇s effective stress constitutive description under seepage flow state, are presented, which have different forms with different representation of the solid phase, matrix or skeleton, constitutive model of porous media. The main difference relates with how to describe the interaction between solid phase and liquid phase in constitutive model. The derived onset condition of strain localization under Terzaghi＇ s effective stress description can be used to interpret different failure types, piping effect, landslides and mudflows, by means of the type and the magnitude ratio of relative movement between solid phase and liquid phase. Examples here illuminate the onset condition of how to work.展开更多
A continental-scale strike-slip shear zone frequently presents a long-lasting deformation and physical expression of strain localization in a middle to lower crustal level.However,the deformation evolution of strain l...A continental-scale strike-slip shear zone frequently presents a long-lasting deformation and physical expression of strain localization in a middle to lower crustal level.However,the deformation evolution of strain localization at a small-scale remains unclear.This study investigated<10 cm wide shear zones developing in undeformed granodiorites exposed at the boundary of the continental-scale Gaoligong strike-slip shear zone.The small-scale ductile shear zones exhibit a typical transition from protomylonite,mylonite to extremely deformed ultramylonite,and decreasing mineral size from coarse-grained aggregates to extremely fine-grained mixed phases.Shearing sense indicators such as hornblende and feldspar porphyroclasts in the shear zone are the more significantly low-strain zone of mylonite.The microstructure and EBSD results revealed that the small-scale shear zone experienced ductile deformation under medium-high temperature conditions.Quartz aggregates suggested a consistent temperature with an irregular feature,exhibiting a dominated high-temperature prism <a> slip system.Additionally,coarse-grained aggregates in the mylonite of the shear zone were deformed predominantly by dislocation creep,while ultra-plastic flow by viscous grain boundary sliding was an essential deformation process in the extremely fine-grained(~50μm)mixed-phases in the ultramylonite.Microstructural-derived strain rates calculated from quartz paleopiezometry were on the order of 10^(-15) to 10^(-13) s^(-1)from low-strain mylonite to high strained ultramylonite.The localization and strain ratelimited process was fluid-assisted precipitation presenting transitions of compositions as hydrous retrogression of hornblende to mica during increasing deformation and exhumation.Furthermore,the potential occurrence of the small-scale shear zone was initiated at a middle-deep crust seated crustal condition dominated by the temperature-controlled formation and rheological weakening.展开更多
An investigation of computer simulation is presented to analyze the effectsof strain localization and damage evolution in large plastic deformation. The simulation is carriedout by using an elastic-plastic-damage coup...An investigation of computer simulation is presented to analyze the effectsof strain localization and damage evolution in large plastic deformation. The simulation is carriedout by using an elastic-plastic-damage coupling finite element program that is developed based onthe concept of mixed interpolation of displacement/pressure. This program has been incorporated intoa damage mechanics model as well as the corresponding damage criterion. To illustrate theperformance of the proposed approach, a typical strain localization problem has been simulated. Theresults show that the proposed approach is of good capability to capture strain localization andpredict the damage evolution.展开更多
Fracture strain becomes critical for the local formability and crash performance of carbody components when the tensile strength exceeds 1000 MPa.Regrettably,high-strength quenching and partitioning(Q&P)steels and...Fracture strain becomes critical for the local formability and crash performance of carbody components when the tensile strength exceeds 1000 MPa.Regrettably,high-strength quenching and partitioning(Q&P)steels and dual-phase(DP)steels always focus on improving the tensile ductility for stretch formability,while ignoring their limited fracture strain.In this work,we explored a novel strategy,i.e.,developing a high fracture strain ferrite-martensite dual-phase steel(HFS-DP)maintaining good strength–ductility balance by suppressing intense strain localization during deformation and enhancing martensite deformability via microstructure design including grain refinement,nano-precipitate hardening in soft ferrite phase,low-carbon and high fraction martensite.HFS-DP demonstrates a remarkable 26%and 47%improvement in tensile ductility and fracture strain,respectively,compared to commercial DP1180 steel with similar ultimate tensile strength.Furthermore,HFS-DP also exhibits a substantial 39%improvement in fracture strain compared to retained austenite-involved commercial QP1180 steel.The detailed processes of strain partitioning,strain localization,and damage formation during deformation were revealed through in-situ scanning electron microscopy(SEM)observation combined with digital image correlation(DIC).The results indicate that the excellent coordinated deformation between ferrite and martensite,coupled with microstructure refinement,effectively suppresses intense strain localization.Moreover,the excellent martensite deformability resulting from the low carbon content also aids in retarding crack formation.This combination effectively suppresses damage initiation and development during deformation,therefore the fracture strain is significantly improved.This study not only contributes to a deeper understanding of the strain localization and damage process during tensile deformation of DP steels,but also provides a new perspective on designing ultrahigh strength steels with high ductility and fracture strain.展开更多
A micromechanics-based model is established. The model takes the interaction among sliding cracks into account, and it is able to quantify the effect of various parameters on the localization condition of damage and d...A micromechanics-based model is established. The model takes the interaction among sliding cracks into account, and it is able to quantify the effect of various parameters on the localization condition of damage and deformation for brittle rock subjected to compressive loads. The closed-form explicit expression for the complete stress-strain relation of rock containing microcracks subjected to compressive loads was obtained. It is showed that the complete stress-strain relation includes linear elasticity,nonlinear hardening,rapid stress drop and strain softening.The behavior of rapid stress drop and strain softening is due to localization of deformation and damage. Theoretical predictions have shown to be consistent with the experimental results.展开更多
The deformation localization in strain-rate sensitive porous materials is analyzed based on the lower bound approach proposed by the author. The retarding effect of material viscosity on deformation localization and t...The deformation localization in strain-rate sensitive porous materials is analyzed based on the lower bound approach proposed by the author. The retarding effect of material viscosity on deformation localization and the influence of the material strain-rate sensitivity factor on the critical strain to localized necking and the shear localization are investigated. Consideration concerning the material inhomogeneity and the void nucleation effect is also given. Finally the fracture strains of the plane strain tension specimens of AISI4340 steels are calculated and the results are compared with those of the experiment and of Gurson's equations.展开更多
The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irr...The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irreversible changes of their microscopic structures due to microcrack growth. The complete stress-strain relation including linear elasticity, nonlinear hardening,rapid stress drop and strain softening was obtained. The influence of all microcracks with different sizes and orientations were introduced into the constitutive relation by using the probability density function describing the distribution of orientations and the probability density function describing the distribution of sizes. The influence of Weibull distribution describing the distribution of orientations and Rayleigh function describing the distribution of sizes on the constitutive relation were researched. Theoretical predictions have shown to be consistent with the experimental results.展开更多
基金support from National Natural Science Foundation of China(Grant Nos.62205223)Natural Science Foundation of Guangdong Province(Grant Nos.2023A1515011455)+6 种基金Science and Technology Innovation Commission of Shenzhen(Grant Nos.20231121120748002)support from Guangdong Introducing Innovative and Entrepreneurial Teams(Grant Nos.2019ZT08L101)Natural Science Foundation of Guangdong Province(Grant Nos.2023A1515110091)Science and Technology Innovation Commission of Shenzhen(Grant Nos.JSGGKQTD20221101115701006)support from National Key R&D Program of China(Grant Nos.2021YFA1401100)National Natural Science Foundation of China(Grant Nos.12104317)Scientific Instrument Developing Project of Shenzhen University(Grant Nos.2023YQ003)。
文摘Two-dimensional transition metal dichalcogenides(2D TMDCs)have received considerable attention in local strain engineering due to their extraordinary mechanical flexibility,electonic structure,and optical properties.The strain-induced out-of-plane deformations in 2D TMDCs lead to diverse excitonic behaviors and versatile modulations in optical properties,paving the way for the development of advanced quantum technologies,flexible optoelectronic materials,and straintronic devices.Research on local strain engineering on 2D TMDCs has been delved into fabrication techniques,electronic state variations,and quantum optical applications.This review begins by summarizing the state-of-the-art methods for introducing local strain into 2D TMDCs,followed by an exploration of the impact of local strain engineering on optical properties.The intriguing phenomena resulting from local strain,such as exciton funnelling and anti-funnelling,are also discussed.We then shift the focus to the application of locally strained 2D TMDCs as quantum emitters,with various strategies outlined for modulating the properties of TMDC-based quantum emitters.Finally,we discuss the remaining questions in this field and provide an outlook on the future of local strain engineering on 2D TMDCs.
基金Supported by the National Key Research and Development Program of China (Grant No.2016YFA0302001)the National Natural Science Foundation of China (Grant Nos.11774224,12074244,11521404,and 61701394)+1 种基金support from the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learningadditional support from a Shanghai talent program。
文摘Detection of local strain at the nanometer scale with high sensitivity remains challenging.Here we report near-field infrared nano-imaging of local strains in bilayer graphene by probing strain-induced shifts of phonon frequency.As a non-polar crystal,intrinsic bilayer graphene possesses little infrared response at its transverse optical phonon frequency.The reported optical detection of local strain is enabled by applying a vertical electrical field that breaks the symmetry of the two graphene layers and introduces finite electrical dipole moment to graphene phonon.The activated phonon further interacts with continuum electronic transitions,and generates a strong Fano resonance.The resulted Fano resonance features a very sharp near-field infrared scattering peak,which leads to an extraordinary sensitivity of-0.002%for the strain detection.Our results demonstrate the first nano-scale near-field Fano resonance,provide a new way to probe local strains with high sensitivity in non-polar crystals,and open exciting possibilities for studying strain-induced rich phenomena.
基金National Natural Science Foundation of China(No.11874067)。
文摘We reported a low-cost and easy-to-make method to effectively generate quantum dot(QD)states in 2D hBN films for quantum emissions at room temperature by utilizing silica nanospheres,in comparison with the sophisticated nanofabrication method reported in previous studies.The QDs created in 2D hBN films using silica nanospheres exhibit pronounced photon emissions with a good photo-stability in air,a narrow distribution of the emission peaks within the range of 580-620 nm,and a directional emission pattern,behaving as a single electric dipole.Our work develops the method of controllable fabrication of quantum emitters in 2D materials by using nano materials and structures.
基金support of her postdoctoral research at the GFZ Helmholtz Centre for Geosciences.P.Pan acknowledges the financial support of the National Natural Science Foundation of China(Grant No.52339001)H.Hofmann and Y.Ji acknowledge the financial support of the Helmholtz Association's Initiative and Networking Fund for the Helmholtz Young Investigator Group ARES(contract number VH-NG-1516).
文摘A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.
基金supported by the National Natural Science Foundation of China(Grant No.52339001).
文摘To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.
基金Supported by the National Natural Science Foundation of China(52101350).
文摘Welded joints can be divided into different material zones,with considerable variation of material properties around the weld toe.The material inhomogeneity influences the local stress and strain of welded joints under monotonic and cyclic loading.This study aims to examine the local stress and strain characteristics of welded joints considering material inhomogeneity.Numerical models with various material zones were developed,and material properties were determined based on hardness.Smooth specimen models were used to analyze stress and strain distributions excluding notch effects.A detailed inhomogeneous model of a welded joint was established based on extensive microhardness measurements around the weld toe and the Kriging interpolation method.Additionally,a homogeneous model and a simplified inhomogeneous model,based on limited measured data,were generated and compared with the detailed inhomogeneous model.Fatigue life was estimated using the Smith,Watson,and Topper method based on the obtained stress and strain.For smooth specimen models,stress concentration occurs at a location where the strain is not significant,and fatigue cracks were most likely to initiate from the base metal.Results from the two simplified models showed deviations from those of the detailed inhomogeneous model,and the limitations of these simplified models are discussed.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea Government(MOTIE)(Grant No.20214000000500,Training program of CCUS for the green growth)by the National Research Foundation of Korea(NRF)grant funded by the Korea Government(MSIT)(Grant No.2022R1F1A1076409)the support from the Chinese Scholarship Council for awarding a scholarship(CSC No.202106820011).
文摘The study of rock failure mechanisms is fundamental to geotechnical engineering,as it enhances design quality and mitigates disaster risks.This research employed in situ compression tests on 3D-printed rocklike samples with a single flaw,combining Micro-CT scans and a specialized loading device to analyze their behavior.Mechanical properties and failure modes of these printed samples were compared to those of natural flawed sandstones,demonstrating the capability of 3D printing to replicate natural rock characteristics.By reconstructing 3D crack evolution from 2D CT images and applying digital volume correlation(DVC),the study visualized internal strain fields and established a relationship between strain patterns and rock failure.The results reveal that crack initiation consistently occurs at the flaw,advancing into tensile and secondary shear or mixed cracks.For flaw angles(α)ranging from 0°to 45°,the 3D-printed samples exhibited a higher number of newly formed cracks and a faster increase in crack volume with strain.In contrast,for flaw angles of 45°≤α≤90°,the opposite trend was observed.The internal strain field exhibited significant strain localization,with this uneven distribution playing a critical role in sample failure.When the flaw angle was in the range of 0°≤α≤30°,failure was primarily driven by tensile cracks,forming distinct tensile bands.Conversely,for 30°<α≤90°,a combination of tensile and shear cracks dominated the failure,producing both shear and tensile bands in the sample.Additionally,the strain field component ε_(yy) showed a strong correlation with the evolution of internal damage,providing valuable insights into the underlying rock failure mechanisms.
基金supported by the National Key Re-search&Development Plan of China(No.2020YFA0405900)the Major Research Plan of the National Natural Science Foundation of China(No.92263201)Y.P.Xia would like to thank the support by the Jiangsu Funding Program for Excellent Postdoctoral Talent.All authors thank the Advanced Material Research Institute of Jiangsu Industrial Technology Research Institute(JITRI,Suzhou,China)for the experimental support.
文摘Laser-welded Ti-6Al-4 V is prone to severe residual stresses,microstructural variation,and structural de-fects which are known detrimental to the mechanical properties of weld joints.Residual stress removal is typically applied to weld joints for engineering purposes via heat treatment,in order to avoid prema-ture failure and performance degradation.In the present work,we found that proper welding residual stresses in laser-welded Ti-6Al-4 V sheets can maintain better ductility during uniaxial tension,as op-posed to the stress-relieved counterparts.A detailed experimental investigation has been performed on the deformation behaviours of Ti-6Al-4 V butt welds,including residual stress distribution characteriza-tions by focused ion beam ring-coring coupled with digital image correlation(FIB-DIC),X-ray comput-erized tomography(CT)for internal voids,and in-situ DIC analysis of the subregional strain evolutions.It was found that the pores preferentially distributed near the fusion zone(FZ)boundary,where the compressive residual stress was up to-330 MPa.The removal of residual stress resulted in a changed failure initiation site from the base material to the FZ boundary,the former with ductile and the latter with brittle fracture characteristics under tensile deformation.The combined effects of residual stresses,microstructures,and internal pores on the mechanical responses are discussed in detail.This work high-lights the importance of inevitable residual stress and pores in laser weld pieces,leading to key insights for post-welding treatment and service performance evaluations.
基金financially supported by the National Natural Science Foundation of China(No.51574196)the Natural Sciences and Engineering Research Council of Canada(NSERC)in the form of an international research collaboration+3 种基金the financial support by Premier’s Research Excellence Award(PREA)NSERC-Discovery Accelerator Supplement(DAS)AwardCanada Foundation for Innovation(CFI)Ryerson Research Chair(RRC)program。
文摘Cyclic deformation behavior of friction-stir-welded dissimilar AA2024-T351 to AA7075-T65 aluminum alloy joints was evaluated via stepwise tests at different strain rates,along with transmission electron microscopy examinations to characterize the precipitates required to assess internal stresses.Electron backscatter diffraction was employed to observe the inhomogeneous microstructures of the FSWed joints.Strain localization appeared in the heat affected zone(HAZ)of AA2024 side.After cyclic deformation of 500 cycles at a total strain amplitude of 0.5%,the strength of the dissimilar joints resumed basically to that of AA2024 base material.And the AA2024 HAZ was obviously hardened,which should be attributed to the introduced dislocations during cyclic deformation process.Cyclic hardening capacity of the joints increased with decreasing strain rate.
基金support from National Natural Science Foundation of China(Grant No.52178309)the National Key R&D Program of China(Grant No.2017YFC0804602)the Fundamental Research Funds for the Central Universities(Grant No.2019JBM092)。
文摘To address the problems of strain localization, the exact Mohr-Coulomb (MC) model is used based on second-order cone programming (mpcFEM-SOCP) in the framework of micropolar continuum finite element method. Using the uniaxial compression test, we focused on the earth pressure problem of rigid wall segment involving non-associated plasticity. The numerical results reveal that when mpcFEM-SOCP is applied, the problems of mesh dependency can be effectively addressed. For geotechnical strain localization analysis involving non-associated MC plasticity, mpcFEM-SOCP in conjunction with the pseudo-time discrete scheme can improve the numerical stability and avoid the unreasonable softening issue in the pressure-displacement curves, which may be encountered in the conventional FEM. It also shows that the pressure-displacement responses calculated by mpcFEM-SOCP with the pseudo-time discrete scheme are higher than those calculated by mpcFEM-SOCP with the Davis scheme. The inclination angle of shear band predicted by mpcFEM-SOCP with the pseudo-time discrete scheme agrees well with the theoretical solution of non-associated MC plasticity.
基金financially supported by the National Natural Science Foundation of China(Nos.52061135207,51871016,51921001,11790293,and 51971017)111 Project(No.B07003)the Projects of SKL-AMM-USTB(Nos.2019Z-01 and 2018Z-19)。
文摘The coupling effects of the metastable austenitic phase and the amorphous matrix in a transformation-induced plasticity(TRIP)-reinforced bulk metallic glass(BMG)composite under compressive loading were investigated by employing the digital image correlation(DIC)technique.The evolution of local strain field in the crystalline phase and the amorphous matrix was directly monitored,and the contribution from the phase transformation of the metastable austenitic phase was revealed.Local shear strain was found to be effectively consumed by the displacive phase transformation of the metastable austenitic phase,which relaxed the local strain/stress concentration at the interface and thus greatly enhanced the plasticity of the TRIP-reinforced BMG composites.Our current study sheds light on in-depth understanding of the underlying deformation mechanism and the interplay between the amorphous matrix and the metastable crystalline phase during deformation,which is helpful for design of advanced BMG composites with further improved properties.
基金supported by the National Natural Science Foundation of China(No.61104132)
文摘Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.
基金the National Natural Science Foundation of China for financial support(Grant No.59875025) to the research cooperation with OIT,Japan
文摘Using elastic crystalline viscoplastic finite element (FE) annlysis, the formability of BCC steel sheets was assessed. An orientation probability assignment method in the FE modeling procedure, which can be categorized as an inhomogenized material modeling, was newly proposed. In the study, the crystal orientations of three materials, mild steel, dual phase steel and the high strength steel, were obtained by Xray diffraction and orientation distribution function (ODF) analyses. The measured ODF results have revealed clearly different textures in the sheets, featured by orientation fibers, skeleton lines and selected orientations in Euler angle space, which are closely related to the plastic anisotropy. Then, the crystal orientations were assigned to FE integration points by using this ODF data, individually. The FE analyses of the standard limiting dome height (LDH) test show how the fiber textures affect the extent of strain localization in the forming processes. It was confirmed by comparison with experimental results that this FE code could predict the extreme strain localization and assess the sheet formability.
文摘Based on governing equations of saturated porous media and Liapunov＇ s stability here, onset conditions matrix of porous media used by solid stress and Terzaghi＇s effective stress constitutive description under seepage flow state, are presented, which have different forms with different representation of the solid phase, matrix or skeleton, constitutive model of porous media. The main difference relates with how to describe the interaction between solid phase and liquid phase in constitutive model. The derived onset condition of strain localization under Terzaghi＇ s effective stress description can be used to interpret different failure types, piping effect, landslides and mudflows, by means of the type and the magnitude ratio of relative movement between solid phase and liquid phase. Examples here illuminate the onset condition of how to work.
基金financially supported by the National Natural Science Foundations of China(Nos.41972220,4188810)the National Key Research and Development Program(No.2017YFC0602401)the Excellent Youth Fund of the National Natural Science Foundation of China(No.41722207)。
文摘A continental-scale strike-slip shear zone frequently presents a long-lasting deformation and physical expression of strain localization in a middle to lower crustal level.However,the deformation evolution of strain localization at a small-scale remains unclear.This study investigated<10 cm wide shear zones developing in undeformed granodiorites exposed at the boundary of the continental-scale Gaoligong strike-slip shear zone.The small-scale ductile shear zones exhibit a typical transition from protomylonite,mylonite to extremely deformed ultramylonite,and decreasing mineral size from coarse-grained aggregates to extremely fine-grained mixed phases.Shearing sense indicators such as hornblende and feldspar porphyroclasts in the shear zone are the more significantly low-strain zone of mylonite.The microstructure and EBSD results revealed that the small-scale shear zone experienced ductile deformation under medium-high temperature conditions.Quartz aggregates suggested a consistent temperature with an irregular feature,exhibiting a dominated high-temperature prism <a> slip system.Additionally,coarse-grained aggregates in the mylonite of the shear zone were deformed predominantly by dislocation creep,while ultra-plastic flow by viscous grain boundary sliding was an essential deformation process in the extremely fine-grained(~50μm)mixed-phases in the ultramylonite.Microstructural-derived strain rates calculated from quartz paleopiezometry were on the order of 10^(-15) to 10^(-13) s^(-1)from low-strain mylonite to high strained ultramylonite.The localization and strain ratelimited process was fluid-assisted precipitation presenting transitions of compositions as hydrous retrogression of hornblende to mica during increasing deformation and exhumation.Furthermore,the potential occurrence of the small-scale shear zone was initiated at a middle-deep crust seated crustal condition dominated by the temperature-controlled formation and rheological weakening.
基金The work was financially supported by a research grant from University of Science and Technology Beijing (No.20020611590).
文摘An investigation of computer simulation is presented to analyze the effectsof strain localization and damage evolution in large plastic deformation. The simulation is carriedout by using an elastic-plastic-damage coupling finite element program that is developed based onthe concept of mixed interpolation of displacement/pressure. This program has been incorporated intoa damage mechanics model as well as the corresponding damage criterion. To illustrate theperformance of the proposed approach, a typical strain localization problem has been simulated. Theresults show that the proposed approach is of good capability to capture strain localization andpredict the damage evolution.
基金supported by the National Natural Science Foundation of China(No.52101128)the Jiangsu Provincial Key Research and Development Program(No.BE023059)+1 种基金the Post-doctoral Science Foundation of China(No.2022M710021)the Northeastern University Postdoctoral Research Fund of China(No.20220202).
文摘Fracture strain becomes critical for the local formability and crash performance of carbody components when the tensile strength exceeds 1000 MPa.Regrettably,high-strength quenching and partitioning(Q&P)steels and dual-phase(DP)steels always focus on improving the tensile ductility for stretch formability,while ignoring their limited fracture strain.In this work,we explored a novel strategy,i.e.,developing a high fracture strain ferrite-martensite dual-phase steel(HFS-DP)maintaining good strength–ductility balance by suppressing intense strain localization during deformation and enhancing martensite deformability via microstructure design including grain refinement,nano-precipitate hardening in soft ferrite phase,low-carbon and high fraction martensite.HFS-DP demonstrates a remarkable 26%and 47%improvement in tensile ductility and fracture strain,respectively,compared to commercial DP1180 steel with similar ultimate tensile strength.Furthermore,HFS-DP also exhibits a substantial 39%improvement in fracture strain compared to retained austenite-involved commercial QP1180 steel.The detailed processes of strain partitioning,strain localization,and damage formation during deformation were revealed through in-situ scanning electron microscopy(SEM)observation combined with digital image correlation(DIC).The results indicate that the excellent coordinated deformation between ferrite and martensite,coupled with microstructure refinement,effectively suppresses intense strain localization.Moreover,the excellent martensite deformability resulting from the low carbon content also aids in retarding crack formation.This combination effectively suppresses damage initiation and development during deformation,therefore the fracture strain is significantly improved.This study not only contributes to a deeper understanding of the strain localization and damage process during tensile deformation of DP steels,but also provides a new perspective on designing ultrahigh strength steels with high ductility and fracture strain.
文摘A micromechanics-based model is established. The model takes the interaction among sliding cracks into account, and it is able to quantify the effect of various parameters on the localization condition of damage and deformation for brittle rock subjected to compressive loads. The closed-form explicit expression for the complete stress-strain relation of rock containing microcracks subjected to compressive loads was obtained. It is showed that the complete stress-strain relation includes linear elasticity,nonlinear hardening,rapid stress drop and strain softening.The behavior of rapid stress drop and strain softening is due to localization of deformation and damage. Theoretical predictions have shown to be consistent with the experimental results.
文摘The deformation localization in strain-rate sensitive porous materials is analyzed based on the lower bound approach proposed by the author. The retarding effect of material viscosity on deformation localization and the influence of the material strain-rate sensitivity factor on the critical strain to localized necking and the shear localization are investigated. Consideration concerning the material inhomogeneity and the void nucleation effect is also given. Finally the fracture strains of the plane strain tension specimens of AISI4340 steels are calculated and the results are compared with those of the experiment and of Gurson's equations.
文摘The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irreversible changes of their microscopic structures due to microcrack growth. The complete stress-strain relation including linear elasticity, nonlinear hardening,rapid stress drop and strain softening was obtained. The influence of all microcracks with different sizes and orientations were introduced into the constitutive relation by using the probability density function describing the distribution of orientations and the probability density function describing the distribution of sizes. The influence of Weibull distribution describing the distribution of orientations and Rayleigh function describing the distribution of sizes on the constitutive relation were researched. Theoretical predictions have shown to be consistent with the experimental results.
