Understanding the effects of point liquid loading on transversely isotropic poroelastic media is crucial for advancing geomechanics and biomechanics, where precise modeling of fluid-structure interactions is essential...Understanding the effects of point liquid loading on transversely isotropic poroelastic media is crucial for advancing geomechanics and biomechanics, where precise modeling of fluid-structure interactions is essential. This paper presents a comprehensive analysis of infinite transversely isotropic poroelasticity under a fluid source, based on Biot's theory, aiming to uncover new and previously unexplored insights in the literature. We begin our study by deriving a general solution for fluid-saturated, transversely isotropic poroelastic materials in terms of harmonic functions that satisfy sixth-order homogeneous partial differential equations, using potential theory and Almansi's theorem. Based on these general solutions and potential functions, we construct a Green's function for a point fluid source, introducing three new harmonic functions with undetermined constants. These constants are determined by enforcing continuity and equilibrium conditions. Substituting these into the general solution yields fundamental solutions for poroelasticity that provide crucial support for a wide range of project problems. Numerical results and comparisons with existing literature are provided to illustrate physical mechanisms through contour plots. Our observations reveal that all components tend to zero in the far field and become singular at the concentrated source. Additionally, the contours exhibit rapid changes near the point fluid source but display gradual variations at a distance from it. These findings highlight the intricate behavior of the system under point liquid loading, offering valuable insights for further research and practical applications.展开更多
The method of integrated Green's function for the calculation of the tilt(?)load tide proposed by this paper is sn improvement and s development of the current widely used method proposed by Farrell, and it is s n...The method of integrated Green's function for the calculation of the tilt(?)load tide proposed by this paper is sn improvement and s development of the current widely used method proposed by Farrell, and it is s new method of calculation. According to this method, the integrated Green's function of tilt load tide has been calculated first, then on the basis of the cotidal charts the tilt load tide caused by the oceanic tides at any point on the continent can be easily calculated through algebraic procedures. As an example of application of this method the tilt load tides of M_2 have been calculated on the basis of cotidal charts of Schwiderski for the following three stations: Wuchang, Tai'an and Xuzhou.展开更多
Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line...Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line in a poroelastie layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green＇s functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.展开更多
This paper presents a method to derive the Dyadic Green’s Function(DGF)ofa loaded rectangular waveguide by using the image method.In the calculation of the DGF,we use the integral transformation and replace the multi...This paper presents a method to derive the Dyadic Green’s Function(DGF)ofa loaded rectangular waveguide by using the image method.In the calculation of the DGF,we use the integral transformation and replace the multi-infinite summation by a single one;thus it greatly simplifies the calculation and saves computer time.As an example of the DGF’sapplication,we give the moment method’s scattering field calculation of a metal sphere resting onthe broad wall of the loaded rectangular waveguide.Results of our calculations well agree withboth data of experiments performed in our laboratory and those are published.It is easy to seethat the method used in this paper can be expanded to other related waveguide problems.展开更多
Half-space Green's function due to a spatially harmonic line load has been expressed as a sum of the full-space Green's functions and a 2-D integral representation of the reflected waves by the free surface of...Half-space Green's function due to a spatially harmonic line load has been expressed as a sum of the full-space Green's functions and a 2-D integral representation of the reflected waves by the free surface of the half-space.By using the obtained half-space Green's function,an integral rep- resentation of the scattered waves by a cylindrical obstacle is then derived.Finally,by analyzing the far-zone behavior of the integrands of the integral representation.the far-field pattern of the scattered waves in a half-space obtained.展开更多
Nonlinear variations in the coordinate time series of global navigation satellite system(GNSS) reference stations are strongly correlated with surface displacements caused by environmental loading effects,including at...Nonlinear variations in the coordinate time series of global navigation satellite system(GNSS) reference stations are strongly correlated with surface displacements caused by environmental loading effects,including atmospheric, hydrological, and nontidal ocean loading. Continuous improvements in the accuracy of surface mass loading products, performance of Earth models, and precise data-processing technologies have significantly advanced research on the effects of environmental loading on nonlinear variations in GNSS coordinate time series. However, owing to theoretical limitations, the lack of high spatiotemporal resolution surface mass observations, and the coupling of GNSS technology-related systematic errors, environmental loading and nonlinear GNSS reference station displacements remain inconsistent. The applicability and capability of these loading products across different regions also require further evaluation. This paper outlines methods for modeling environmental loading, surface mass loading products, and service organizations. In addition, it summarizes recent advances in applying environmental loading to address nonlinear variations in global and regional GNSS coordinate time series. Moreover, the scientific questions of existing studies are summarized, and insights into future research directions are provided. The complex nonlinear motion of reference stations is a major factor limiting the accuracy of the current terrestrial reference frame. Further refining the environmental load modeling method, establishing a surface mass distribution model with high spatiotemporal resolution and reliability, exploring other environmental load factors such as ice sheet and artificial mass-change effects, and developing an optimal data-processing model and strategy for reprocessing global reference station data consistently could contribute to the development of a millimeter-level nonlinear motion model for GNSS reference stations with actual physical significance and provide theoretical support for establishing a terrestrial reference frame with 1 mm accuracy by 2050.展开更多
The response of radial inhomogeneous elastic earth under the action of oceanic tides is studied by use of the combination of convolution integral with spherical harmonic expansion. In the meantime, the effect of ocean...The response of radial inhomogeneous elastic earth under the action of oceanic tides is studied by use of the combination of convolution integral with spherical harmonic expansion. In the meantime, the effect of oceanic tides on gravity, tilt and strain in the mainland of China is estimated, and the accuracy of loading correction is also briefly analysed. Results show that the loading effect along the coast of China cannot be neglected, for gravity it is about 5％ of body tides, for tilt it reaches the same magnitude as body tides, for strain about 50％. The result obtained can be used to provide the tidal correction for various precision geodesy. The proposal method may also be applied to the effect of other surface loading except oceanic tides.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 12272269, 11972257,11832014 and 11472193)the Shanghai Pilot Program for Basic Researchthe Shanghai Gaofeng Project for University Academic Program Development。
文摘Understanding the effects of point liquid loading on transversely isotropic poroelastic media is crucial for advancing geomechanics and biomechanics, where precise modeling of fluid-structure interactions is essential. This paper presents a comprehensive analysis of infinite transversely isotropic poroelasticity under a fluid source, based on Biot's theory, aiming to uncover new and previously unexplored insights in the literature. We begin our study by deriving a general solution for fluid-saturated, transversely isotropic poroelastic materials in terms of harmonic functions that satisfy sixth-order homogeneous partial differential equations, using potential theory and Almansi's theorem. Based on these general solutions and potential functions, we construct a Green's function for a point fluid source, introducing three new harmonic functions with undetermined constants. These constants are determined by enforcing continuity and equilibrium conditions. Substituting these into the general solution yields fundamental solutions for poroelasticity that provide crucial support for a wide range of project problems. Numerical results and comparisons with existing literature are provided to illustrate physical mechanisms through contour plots. Our observations reveal that all components tend to zero in the far field and become singular at the concentrated source. Additionally, the contours exhibit rapid changes near the point fluid source but display gradual variations at a distance from it. These findings highlight the intricate behavior of the system under point liquid loading, offering valuable insights for further research and practical applications.
文摘The method of integrated Green's function for the calculation of the tilt(?)load tide proposed by this paper is sn improvement and s development of the current widely used method proposed by Farrell, and it is s new method of calculation. According to this method, the integrated Green's function of tilt load tide has been calculated first, then on the basis of the cotidal charts the tilt load tide caused by the oceanic tides at any point on the continent can be easily calculated through algebraic procedures. As an example of application of this method the tilt load tides of M_2 have been calculated on the basis of cotidal charts of Schwiderski for the following three stations: Wuchang, Tai'an and Xuzhou.
基金National Natural Science Foundation of China Under Grant No.50378063
文摘Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line in a poroelastie layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green＇s functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.
文摘This paper presents a method to derive the Dyadic Green’s Function(DGF)ofa loaded rectangular waveguide by using the image method.In the calculation of the DGF,we use the integral transformation and replace the multi-infinite summation by a single one;thus it greatly simplifies the calculation and saves computer time.As an example of the DGF’sapplication,we give the moment method’s scattering field calculation of a metal sphere resting onthe broad wall of the loaded rectangular waveguide.Results of our calculations well agree withboth data of experiments performed in our laboratory and those are published.It is easy to seethat the method used in this paper can be expanded to other related waveguide problems.
文摘Half-space Green's function due to a spatially harmonic line load has been expressed as a sum of the full-space Green's functions and a 2-D integral representation of the reflected waves by the free surface of the half-space.By using the obtained half-space Green's function,an integral rep- resentation of the scattered waves by a cylindrical obstacle is then derived.Finally,by analyzing the far-zone behavior of the integrands of the integral representation.the far-field pattern of the scattered waves in a half-space obtained.
基金supported by the Basic Science Center Project of the National Natural Science Foundation of China(42388102)the National Natural Science Foundation of China(42174030)+2 种基金the Special Fund of Hubei Luojia Laboratory(220100020)the Major Science and Technology Program for Hubei Province(2022AAA002)the Fundamental Research Funds for the Central Universities of China(2042022dx0001 and 2042023kfyq01)。
文摘Nonlinear variations in the coordinate time series of global navigation satellite system(GNSS) reference stations are strongly correlated with surface displacements caused by environmental loading effects,including atmospheric, hydrological, and nontidal ocean loading. Continuous improvements in the accuracy of surface mass loading products, performance of Earth models, and precise data-processing technologies have significantly advanced research on the effects of environmental loading on nonlinear variations in GNSS coordinate time series. However, owing to theoretical limitations, the lack of high spatiotemporal resolution surface mass observations, and the coupling of GNSS technology-related systematic errors, environmental loading and nonlinear GNSS reference station displacements remain inconsistent. The applicability and capability of these loading products across different regions also require further evaluation. This paper outlines methods for modeling environmental loading, surface mass loading products, and service organizations. In addition, it summarizes recent advances in applying environmental loading to address nonlinear variations in global and regional GNSS coordinate time series. Moreover, the scientific questions of existing studies are summarized, and insights into future research directions are provided. The complex nonlinear motion of reference stations is a major factor limiting the accuracy of the current terrestrial reference frame. Further refining the environmental load modeling method, establishing a surface mass distribution model with high spatiotemporal resolution and reliability, exploring other environmental load factors such as ice sheet and artificial mass-change effects, and developing an optimal data-processing model and strategy for reprocessing global reference station data consistently could contribute to the development of a millimeter-level nonlinear motion model for GNSS reference stations with actual physical significance and provide theoretical support for establishing a terrestrial reference frame with 1 mm accuracy by 2050.
文摘基于一种实用的Bo it模型,利用层状饱和土层的精确动力刚度矩阵,给出了层状饱和场地中线性分布荷载作用于与水平向有夹角的倾斜直线时的动力G reen函数,解决了利用间接边界元法分析局部地形对地震波散射及土-结构动力相互作用等研究中的关键问题。本文解答可以退化为W o lf弹性情况结果,最后进行了算例分析。
文摘The response of radial inhomogeneous elastic earth under the action of oceanic tides is studied by use of the combination of convolution integral with spherical harmonic expansion. In the meantime, the effect of oceanic tides on gravity, tilt and strain in the mainland of China is estimated, and the accuracy of loading correction is also briefly analysed. Results show that the loading effect along the coast of China cannot be neglected, for gravity it is about 5％ of body tides, for tilt it reaches the same magnitude as body tides, for strain about 50％. The result obtained can be used to provide the tidal correction for various precision geodesy. The proposal method may also be applied to the effect of other surface loading except oceanic tides.
