In order to study the critical load position that causes cavities beneath the continuously reinforced concrete pavement（ CRCP） slab under vehicle loading, the elliptical load is translated into the square load based...In order to study the critical load position that causes cavities beneath the continuously reinforced concrete pavement（ CRCP） slab under vehicle loading, the elliptical load is translated into the square load based on the equivalence principle.The CRCP slab is analyzed to determine the cavity position beneath the slab under vehicle loading. The influences of cavity size on the CRCP slab＇s stress and vertical displacement are investigated. The study results showthat the formation of the cavity is unavoidable under traffic loading, and the cavity is located at the edge of the longitudinal crack and the slab corner.The cavity size exerts an obvious influence on the largest horizontal tensile stress and vertical displacement. The slab corner is the critical load position of the CRCP slab. The results can be used to assist the design of CRCP in avoiding cavities beneath slabs subject to vehicle loading.展开更多
Anti symmetric four point bending specimen with different loading point positions was used to study effect of loading point position on fracture mode of rock in order to explore a feasible method for achieving Mode Ⅱ...Anti symmetric four point bending specimen with different loading point positions was used to study effect of loading point position on fracture mode of rock in order to explore a feasible method for achieving Mode Ⅱ fracture and determining Mode Ⅱ fracture toughness of rock, K ⅡC . Numerical and experimental results show that the distance between the inner and outer loading points, L 1+ L 2, has a great influence on stresses at notch tip and fracture mode. When L 1+ L 2>0.5 L or 0.1 L < L 1+ L 2<0.5 L , maximum principal stress σ 1 exceeds the tensile strength σ t. The ratio of τ max / σ 1 is relatively low or high and thus Mode Ⅰ or mixed mode fracture occurs. When L 1+ L 2< 0.1 L , σ 1 is smaller than σ t and the ratio of τ max / σ 1 is much higher, which facilitates the occurrence of Mode Ⅱ fracture.展开更多
The complex geographical environment in China makes its gravity signals miscellaneous.This work gives a comprehensive representation and explanation in secular trend of gravity change in different regions,the key feat...The complex geographical environment in China makes its gravity signals miscellaneous.This work gives a comprehensive representation and explanation in secular trend of gravity change in different regions,the key features of which include positive trend in inner Tibet Plateau and South China and negative trend in North China plain and high mountain Asia（HMA）.We also present the patterns of amplitudes and phases of annual and semiannual change.The mechanism underlying the semiannual period is explicitly discussed.The displacement in three directions expressed in terms of geo-potential spherical coefficients and load Love numbers are given.A case study applied with these equations is presented.The results show that Global Positioning System（GPS） observations can be used to compare with Gravity Recovery and Climate Experiment（GRACE） derived displacement and the vertical direction has a signal-noise-ratio of about one order of magnitude larger than the horizontal directions.展开更多
In order to reveal the changing law of the mechanical response of asphalt pavements under the action of vehicle load and provide references for the design of durable pavements,three typical asphalt pavement structures...In order to reveal the changing law of the mechanical response of asphalt pavements under the action of vehicle load and provide references for the design of durable pavements,three typical asphalt pavement structures with flexible base(S1),combined base(S2),and semi-rigid base(S3)were selected to perform field strain tests under static and dynamic load using the fiber Bragg grating optical sensing technology.The changing characteristics of the strain field along the horizontal and depth directions of pavements were analyzed.The results indicate that the most unfavorable asphalt pavement layers were the upper-middle surface layer and the lower base layer.In addition,the most unfavorable loading positions on the surface layer and the base layer were the center of wheel load and the gap center between two wheels,respectively.The most unfavorable layer of the surface layers gradually moved from the lower layer to the upper layer with the increase of base layer modulus.The power function relationships between structural layer strain and vehicle speed were revealed.The semi-rigid base asphalt pavement was the most durable pavement type,since its strain value was lower compared to those of the other structures.展开更多
In order to study the influence of longitudinal slope on the mechanical response of steel deck pavement,a method of slope-modulus transformation was proposed for the mechanical analysis of the steel deck pavement base...In order to study the influence of longitudinal slope on the mechanical response of steel deck pavement,a method of slope-modulus transformation was proposed for the mechanical analysis of the steel deck pavement based on the time-temperature equivalence principle.Considering the mechanical action on a slope,a finite element model of the deck pavement was established to determine the critical load position of tensileand shear stress of the steel deck pavement.Additionally,the influence of longitudinal slope on the mechanical response of the deck pavement under the conditions of uniform speed and emergency braking was analyzed.The results indicate that the maximum transverse tensile stress at the pavement surface and the maximum transverse shear stress at the pavement bottom are always greater than their longitudinal counterparts under uniform speed.Under emergency braking,however,the critical slope gradient of t e maximum transverse and longitudinal tensile stress at t e pavement surface is 6%.The maximum longitudinal shear stess at t e pavement bottom is always greater ta n t e maximum tansverse shear stess.This stidy is helpful in t e strctural design of large longitudinal slope steel deck pavements.展开更多
This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certai...This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certain megnitude are mainly positive ones a certain time before the main shock in or near the focal regions of most strong quakes,and form a concentratingintervals of positive quakes,The main quakes generally locate in or near the areas of positive quake distribution.Negative quakes often occur several months before the main shocks (not excluding positive ones), with the decrease of LURR (Loading/Unloading Response Ratio) values.It possibly shows that earthquake generating process has come to a short term stage.These characteristics may help to predict the time and location of the future earthquakes,and have been applied to the preliminary prediction of the time and the location of the earthquake of M =6.6 on Sep.11,1996 in Kanto area.展开更多
基金The Science Foundation of Ministry of Transport of the People's Republic of China(No.200731822301-7)
文摘In order to study the critical load position that causes cavities beneath the continuously reinforced concrete pavement（ CRCP） slab under vehicle loading, the elliptical load is translated into the square load based on the equivalence principle.The CRCP slab is analyzed to determine the cavity position beneath the slab under vehicle loading. The influences of cavity size on the CRCP slab＇s stress and vertical displacement are investigated. The study results showthat the formation of the cavity is unavoidable under traffic loading, and the cavity is located at the edge of the longitudinal crack and the slab corner.The cavity size exerts an obvious influence on the largest horizontal tensile stress and vertical displacement. The slab corner is the critical load position of the CRCP slab. The results can be used to assist the design of CRCP in avoiding cavities beneath slabs subject to vehicle loading.
文摘Anti symmetric four point bending specimen with different loading point positions was used to study effect of loading point position on fracture mode of rock in order to explore a feasible method for achieving Mode Ⅱ fracture and determining Mode Ⅱ fracture toughness of rock, K ⅡC . Numerical and experimental results show that the distance between the inner and outer loading points, L 1+ L 2, has a great influence on stresses at notch tip and fracture mode. When L 1+ L 2>0.5 L or 0.1 L < L 1+ L 2<0.5 L , maximum principal stress σ 1 exceeds the tensile strength σ t. The ratio of τ max / σ 1 is relatively low or high and thus Mode Ⅰ or mixed mode fracture occurs. When L 1+ L 2< 0.1 L , σ 1 is smaller than σ t and the ratio of τ max / σ 1 is much higher, which facilitates the occurrence of Mode Ⅱ fracture.
基金supported financially by the National Natural Science Foundation of China(41174063,41331066 and41474059)the CAS/CAFEA International Partnership Program for Creative Research Teams(KZZD-EW-TZ-19)the SKLGED Foundation(2014-1-1-E)
文摘The complex geographical environment in China makes its gravity signals miscellaneous.This work gives a comprehensive representation and explanation in secular trend of gravity change in different regions,the key features of which include positive trend in inner Tibet Plateau and South China and negative trend in North China plain and high mountain Asia（HMA）.We also present the patterns of amplitudes and phases of annual and semiannual change.The mechanism underlying the semiannual period is explicitly discussed.The displacement in three directions expressed in terms of geo-potential spherical coefficients and load Love numbers are given.A case study applied with these equations is presented.The results show that Global Positioning System（GPS） observations can be used to compare with Gravity Recovery and Climate Experiment（GRACE） derived displacement and the vertical direction has a signal-noise-ratio of about one order of magnitude larger than the horizontal directions.
基金Projects(51908071,51708071)supported by National Natural Science Foundation of ChinaProject(2020JJ5975)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(18C0194)supported by the Scientific Research Project of Education Department of Hunan Province,ChinaProject(kfj190301)supported by Open Fund of Key Laboratory of Road Structure and Material of Ministry of Transport(Changsha University of Science&Technology),China。
文摘In order to reveal the changing law of the mechanical response of asphalt pavements under the action of vehicle load and provide references for the design of durable pavements,three typical asphalt pavement structures with flexible base(S1),combined base(S2),and semi-rigid base(S3)were selected to perform field strain tests under static and dynamic load using the fiber Bragg grating optical sensing technology.The changing characteristics of the strain field along the horizontal and depth directions of pavements were analyzed.The results indicate that the most unfavorable asphalt pavement layers were the upper-middle surface layer and the lower base layer.In addition,the most unfavorable loading positions on the surface layer and the base layer were the center of wheel load and the gap center between two wheels,respectively.The most unfavorable layer of the surface layers gradually moved from the lower layer to the upper layer with the increase of base layer modulus.The power function relationships between structural layer strain and vehicle speed were revealed.The semi-rigid base asphalt pavement was the most durable pavement type,since its strain value was lower compared to those of the other structures.
基金The National Science Foundation of China(No.51778142)
文摘In order to study the influence of longitudinal slope on the mechanical response of steel deck pavement,a method of slope-modulus transformation was proposed for the mechanical analysis of the steel deck pavement based on the time-temperature equivalence principle.Considering the mechanical action on a slope,a finite element model of the deck pavement was established to determine the critical load position of tensileand shear stress of the steel deck pavement.Additionally,the influence of longitudinal slope on the mechanical response of the deck pavement under the conditions of uniform speed and emergency braking was analyzed.The results indicate that the maximum transverse tensile stress at the pavement surface and the maximum transverse shear stress at the pavement bottom are always greater than their longitudinal counterparts under uniform speed.Under emergency braking,however,the critical slope gradient of t e maximum transverse and longitudinal tensile stress at t e pavement surface is 6%.The maximum longitudinal shear stess at t e pavement bottom is always greater ta n t e maximum tansverse shear stess.This stidy is helpful in t e strctural design of large longitudinal slope steel deck pavements.
文摘This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certain megnitude are mainly positive ones a certain time before the main shock in or near the focal regions of most strong quakes,and form a concentratingintervals of positive quakes,The main quakes generally locate in or near the areas of positive quake distribution.Negative quakes often occur several months before the main shocks (not excluding positive ones), with the decrease of LURR (Loading/Unloading Response Ratio) values.It possibly shows that earthquake generating process has come to a short term stage.These characteristics may help to predict the time and location of the future earthquakes,and have been applied to the preliminary prediction of the time and the location of the earthquake of M =6.6 on Sep.11,1996 in Kanto area.
