The significance of water energy harvesting in the context of renewable energy utilization is steadily increasing.In response to the need for more efficient utilization of water resources,the nascent technology of liq...The significance of water energy harvesting in the context of renewable energy utilization is steadily increasing.In response to the need for more efficient utilization of water resources,the nascent technology of liquid-solid triboelectric nanogenerators(TENGs)has emerged as a prospective candidate for the harvesting of water energy.Liquid-solid TENGs show several distinct advantages,including their lightweight,low cost,and efficient energy harvesting capabilities.Herein,this review presents a comprehensive exposition of the latest advancements in the field of liquid-solid TENGs.It delves into the underlying principles and different operational modes while also addressing the factors influencing its output performance from a multifaceted perspective.The factors comprise the intrinsic properties of friction materials,the chemical properties of the liquid,and the ambient temperature of liquid-solid TENGs.Furthermore,this review delineates the applications of liquid-solid TENGs as self-powered sensors in physics,chemistry,and biomedical contexts,as well as their applications in various other fields such as corrosion resistance,and so on.Last but not least,it concludes by providing a forward-looking on the future developmental trends of liquid-solid TENGs.展开更多
Liquid-solid phase separation of permalloy in liquid Mg results in selectively dissolved Ni,which provides a unique opportunity for the design of immiscible heterogeneous composite materials and the comprehensive meta...Liquid-solid phase separation of permalloy in liquid Mg results in selectively dissolved Ni,which provides a unique opportunity for the design of immiscible heterogeneous composite materials and the comprehensive metal recycling of permalloy scraps.A guideline of the alloy design for the liquid-solid phase separation system was proposed.The effects of immersion temperature and time on the Ni extraction were studied by an experimental method.The diffusion behavior of Ni from the permalloy to liquid Mg and the microstructure evolution in the permalloy during the liquid-solid phase separation were discussed.The results show that the Ni in the permalloy was quickly extracted into the liquid Mg and formed an Mg-Ni alloy,while the other components such as Fe,Co,and Mn were held back in the phase-separated permalloy.The phase-separated permalloy with the solidified Mg exhibits a three-dimensional(3D)Fe/Mg bicontinuous composite structure.Furthermore,simple treatments were carried out for the reaction products such as the Fe/Mg bicontinuous composite and the Mg-Ni alloy,and the recycling strategies for functionalization of these treated reaction products were provided.A 3D porous Fe-based alloy with electromagnetic interference(EMI)shielding efficiency of 52 dB can be obtained if Mg is removed from the Fe/Mg bicontinuous composite.Instead of the complete separation of pure Ni from the recycled Mg-Ni alloy by vacuum distilling,the Mg-Ni alloy can be enriched into Mg2 Ni as an initial hydrogen storage material.展开更多
The microstructures and properties of A1-45%Si alloy prepared by liquid-solid separation （LSS） process and spray deposition （SD） were studied. The results show that the size, shape and distribution of the primary ...The microstructures and properties of A1-45%Si alloy prepared by liquid-solid separation （LSS） process and spray deposition （SD） were studied. The results show that the size, shape and distribution of the primary Si phase have different influence on the properties of alloys. Comparing with the Si particles with irregular shape, fine size and continuous distribution in SD alloy, the primary Si phase in LSS alloy is sphere-like, coarse and surrounded by the continuous AI matrix. The microstructure features of LSS alloy are beneficial to the higher thermal conductivity and lower thermal expansion coefficient at room temperature. The fine Si particle in SD alloy is advantageous to improving the mechanical properties. The increasing rates of thermal expansion coefficient with temperature are influenced by the distribution of the Si particles, where a lower rate is obtained in SD alloy with continuous Si particles. The agreement of thermal expansion coefficient with the model in LSS alloy differs from that in the SD alloy because of the different microstructure characteristics.展开更多
Al-Ti diffusion couples were made by embedded technology and treated at the temperature between the melting points of Al and Ti. The microstructure evolution and growth mechanism of the Al-Ti DRZ were investigated. Th...Al-Ti diffusion couples were made by embedded technology and treated at the temperature between the melting points of Al and Ti. The microstructure evolution and growth mechanism of the Al-Ti DRZ were investigated. The result shows that the DRZ, the mixture of TiAl3 and Al, grows layer by layer along their chemical equilibrium zone. In the course, the growth interface moves toward the aluminum side. TiAl3 is the only new phase which forms earliest in the course of heat-treatment. The growth mechanism of the DRZ changes after the phase transition of titanium. Before the phase transition of titanium, the growth of the DRZ is controlled by the dissolution speed of the titanium to the molten aluminum, while after the phase transition of titanium, the growth is controlled by the chemical reaction speed of Al and Ti atoms, and consequently, its growth rate is greatly increased.展开更多
The electronic packaging shell of high silicon carbide （54%SiC, volume fraction） aluminum-based composites was produced by liquid-solid separation technique. The characteristics of distribution and morphology of SiC...The electronic packaging shell of high silicon carbide （54%SiC, volume fraction） aluminum-based composites was produced by liquid-solid separation technique. The characteristics of distribution and morphology of SiC as well as the shell’s fracture surface were examined by optical microscopy and scanning electron microscopy, and the thermo-physical and mechanical properties of the shell were also tested. The results show that Al matrix has a net-like structure while SiC is uniformly distributed in the Al matrix. The SiCp/Al composites have a low density of 2.93 g/cm^3, and its relative density is 98.7%. Thermal conductivity of the composites is 175 W/（·K）, coefficient of thermal expansion （CTE） is 10.3×10^-6 K-1 （25-400 ℃）, compressive strength is 496 MPa, bending strength is 404.5 MPa, and the main fracture mode is brittle fracture of SiC particles accompanied by ductile fracture of Al matrix.Its thermal conductivity is higher than that of Si/Al alloy, and its CTE matches with that of the chip material.展开更多
Erosion-corrosion of liquid-solid two-phase flow occurring in a pipe with sudden expansion in cross-section is numerically simulated in this paper. The global model for erosion-corrosion process includes three main co...Erosion-corrosion of liquid-solid two-phase flow occurring in a pipe with sudden expansion in cross-section is numerically simulated in this paper. The global model for erosion-corrosion process includes three main components: the liquid-solid two-phase flow model, erosion model and corrosion model. The Eulerian-Lagrangian approach is used to simulate liquid-solid two-phase flow, while the stochastic trajectory model was adopted to obtain properties of particle phase. Two-way coupling effect between the fluid and the particle phase is considered in the model. The accuracy of the models is tested by the data in the reference. The comparison shows that the model is basically correct and feasible.展开更多
The liquid-solid compound casting technology was used to produce the AZ91D/0Cr19Ni9 bimetal composite without and with hot dipping aluminium, respectively. The influences of Al coating on microstructures and mechanica...The liquid-solid compound casting technology was used to produce the AZ91D/0Cr19Ni9 bimetal composite without and with hot dipping aluminium, respectively. The influences of Al coating on microstructures and mechanical properties of AZ91D/0Cr19Ni9 interface were investigated. The results showed that the mechanical bonding was obtained between AZ91D and bare steel 0Cr19Ni9 where a gap existed at the interface; the metallurgical bonding was formed between AZ91D and Al-coated 0Cr19Ni9, which could be divided into two different intermetallic layers: layer Ⅰ was mainly composed of α-Mg+β-Mg17Al12 eutectic structure and a small amount of MgAl2O4, and layer Ⅱ mainly comprised of Fe2Al5 intermetallic compound. Furthermore, the hardness value of interface was obviously higher than that of AZ91D matrix, and the average hardness values of layers Ⅰ and Ⅱ were HV 158 and HV 493, respectively. The shear strength of AZ91D/Al-coated 0Cr19Ni9 interface was higher than that of AZ91D/bare 0Cr19Ni9 interface, which confirmed that Al coating could improve the adhesive strength between AZ91D and 0Cr19Ni9 during liquid-solid compound casting process.展开更多
This work aims to investigate the erosion-corrosion behavior of Q235B steel in liquid-solid two-phase flows.The weight loss rate,surface morphology and electrochemical parameters of Q235B steel at different temperatur...This work aims to investigate the erosion-corrosion behavior of Q235B steel in liquid-solid two-phase flows.The weight loss rate,surface morphology and electrochemical parameters of Q235B steel at different temperatures(20℃,30℃,40℃)and flow velocities(6 m/s,7 m/s,8 m/s,9 m/s,10 m/s)were studied separately.The results show that the weight loss rate of Q235B steel specimens after erosion-corrosion increases with increasing flow velocity and temperature.For the erosion-corrosion process,the corrosion rates of specimens increase with increasing flow velocity.The results of surface morphology show that the circular pits with clear edges are distributed randomly over specimen surface at low flow velocity,but the pit edge becomes vague at high flow velocity.With temperature increasing,the erosion-corrosion damage became serious as shown by the aggregation of large and small pits on specimen surface.The working mechanism of erosion-corrosion is found to vary with flow velocity and temperature.The relationships among erosion-corrosion components are quantitatively represented and show that synergy dominates the progress of material loss.Corrosion enhances erosion that is a dominant component in the synergy.The inactions of erosion-corrosion can be described by"synergistic"and"additive"behavior.The results show that"additive"effect becomes more significant with increasing flow velocity but decreases with increasing temperature,while"synergistic"effect is not sensitive to flow velocity and temperature.展开更多
In the process of deep-sea mining,the liquid-solid flows in the vertical transportation pipeline are very complex.In the present work,an in-house solver MPSDEM-SJTU based on the improved MPS and DEM is developed for t...In the process of deep-sea mining,the liquid-solid flows in the vertical transportation pipeline are very complex.In the present work,an in-house solver MPSDEM-SJTU based on the improved MPS and DEM is developed for the simulation of hydraulic conveying.Firstly,three examples including the multilayer cylinder collapse,the Poiseuille flow and two-phase dam-break are used to validate the precision of the DEM model,the pipe flow model and MPS-DEM coupling model,respectively.Then,the hydraulic conveying with coarse particles in a vertical pipe is simulated.The solid particle distribution is presented and investigated in detail.Finally,the coupling method is successfully applied for the simulation of the liquid-solid flows in a vertical pipe with rotating blades,which shows the stability of the solver under rotating boundary conditions.This fully Lagrangian model is expected to be a new approach for analyzing hydraulic conveying.展开更多
A damage prediction method based on FE simulation was proposed to predict the occurrence of hot shortness crocks and surface cracks in liquid-solid extrusion process. This method integrated the critical temperature cr...A damage prediction method based on FE simulation was proposed to predict the occurrence of hot shortness crocks and surface cracks in liquid-solid extrusion process. This method integrated the critical temperature criterion and Cockcroft ＆ Latham ductile damage model, which were used to predict the initiation of hot shortness cracks and surface cracks of products, respectively. A coupling simulation of deformation with heat transfer as well as ductile damage was carried out to investigate the effect of extrusion temperature and extrusion speed on the damage behavior of Csf/AZ91D composites. It is concluded that the semisolid zone moves gradually toward deformation zone with the punch descending. The amplitude of the temperature rise at the exit of die from the initial billet temperature increases with the increase of extrusion speed during steady-state extrusion at a given punch displacement. In order to prevent the surface temperature of products beyond the incipient melting temperature of composites, the critical extrusion speed is decreased with the increase of extrusion temperature, otherwise the hot shortness cracks will occur. The maximum damage values increase with increasing extrusion speed or extrusion temperature. Theoretical results obtained by the Deform^TM-2D simulation agree well with the experiments.展开更多
The atomic behavior of liquid-solid mixed-phase nanofluid flows inside nanochannels is investigated by a molecular dynamics simulation （MDS）. The results of visual observation and statistic analysis show that when t...The atomic behavior of liquid-solid mixed-phase nanofluid flows inside nanochannels is investigated by a molecular dynamics simulation （MDS）. The results of visual observation and statistic analysis show that when the nanoparticles reach near each other, the strong interatomic force will make them attach together. This aggrega- tion continues until all nanoparticles make a continuous cluster. The effect of altering the external force magnitude causes changes in the agglomeration rate and system enthalpy. The density and velocity profiles are shown for two systems, i.e., argon （Ar）-copper （Cu） nanofluid and simple Ar fluid between two Cu walls. The results show that using nanopar- ticles changes the base fluid particles ordering along the nanochannel and increases the velocity. Moreover, using nanoparticles in simple fluids can increase the slip length and push the near-wall fluid particles into the main flow in the middle of the nanochannel.展开更多
Previous studies have indicated that piping erosion greatly threatens the safe operation of various hydraulic structures. However, few mathematical models are available to perfectly describe the erosion process due to...Previous studies have indicated that piping erosion greatly threatens the safe operation of various hydraulic structures. However, few mathematical models are available to perfectly describe the erosion process due to the complexity of piping. The focus of the present work is to propose a new fluid solid coupling model to eliminate the shortcomings of existing work. A 'pseudo-liquid' assumption is suggested to simulate the particle movement in the erosion process. Then, based on the mass and momentum conservations of the moving particles and flowing water, a new two-flow model is established by using the continuity equations and motion equations. In the model, the erosion rate of soil is determined with a particle erosion law derived from tests results of STERPI. And ERGUN's empirical equation is used to determine the interaction forces between the liquid and the solid. A numerical approach is proposed to solve the model with the finite volume method and SIMPLE algorithm. The new model is validated with the tests results of STERPI. And the soil erosion principles in piping are also explored.展开更多
Particle based methods can be used for both the simulations of solid and fluid phases in multiphase medium, such as the discrete-element method for solid phase and the smoothed particle hydrodynamics for fluid phase. ...Particle based methods can be used for both the simulations of solid and fluid phases in multiphase medium, such as the discrete-element method for solid phase and the smoothed particle hydrodynamics for fluid phase. This paper presents a computational method combining these two methods for solid-liquid medium. The two phases are coupled by using an improved model from a reported Lagrangian-Eulerian method. The technique is verified by simulating liquid-solid flows in a two-dimensional lid-driven cavity.展开更多
Heat transfer characteristics between the immersed heater and the bed content were studied in the riser of a liquid-solid circulating fluidized bed, whose diameter and height were 0.102 m (ID) and 2.5 m, respectively....Heat transfer characteristics between the immersed heater and the bed content were studied in the riser of a liquid-solid circulating fluidized bed, whose diameter and height were 0.102 m (ID) and 2.5 m, respectively. Effects of liquid velocity, particle size, surface tension of liquid phase and solid circulation rate on the overall heat transfer coefficient were examined. The heat transfer coefficient increased with increasing particle size or solid circulation rate due to the higher potential of particles to contact with the heater surface and promote turbulence near the heater surface. The value of heat transfer coefficient increased gradually with increase in the surface tension of liquid phase, due to the slight increase of solid holdup. The heat transfer coefficient increased with the liquid velocity even in the higher range, due to the solid circulation prevented the decrease in solid holdup, in contrast to that in the conventional liquid-solid fluidized beds. The values of heat transfer coefficient were well correlated in terms of dimensionless groups as well as operating variables.展开更多
Liquid-solid extrusion directly following vacuum infiltration(LSEVI)is an infiltration-extrusion integrated forming technique,and transverse weld between upper residual magnesium alloy and magnesium matrix composites ...Liquid-solid extrusion directly following vacuum infiltration(LSEVI)is an infiltration-extrusion integrated forming technique,and transverse weld between upper residual magnesium alloy and magnesium matrix composites is a common internal defect,which can severely reduce the yield of composite products.To improve current understanding on the mechanism of transverse welding phenomenon,a thermo-mechanical numerical model of LSEVI for magnesium matrix composites was developed.The formation of transverse weld during extrusion was visualized using finite element simulation method,and the formation mechanism was discussed from the aspect of velocity field using a point tracking technique.The simulation results were verified by the experimental results in term of weld shape.展开更多
This paper employs the integral-averaged method of thickness to approximate the periodical flows in a piezoelectric micropump, with a shallow water equation including nonlinearity and viscous damp presented to charact...This paper employs the integral-averaged method of thickness to approximate the periodical flows in a piezoelectric micropump, with a shallow water equation including nonlinearity and viscous damp presented to characterize the flows in micropump. The finite element method is used to obtain a matrix equation of fluid pressure. The fluid pressure equation is combined with the vibration equation of a silicon diaphragm to construct a liquid-solid coupled equation for reflecting the interaction between solid diaphragm and fluid motion in a micropump. Numerical results of a mode analysis of the coupled system indicate that the natural frequencies of the coupled system are much lower than those of the non-coupled system. The influence of additional mass and viscous damp of fluid on the natural frequencies of the coupled system is more significant as the pump thickness is small. It is found that the vibration shape functions of silicon diaphragm of the coupled system are almost the same as those of the non-coupled system. This paper also gives the first-order amplitude-frequency relationship of the silicon diaphragm, which is necessary for the flow-rate-frequency analysis of a micropump.展开更多
Studies were conducted on the interfacial microstructure of a steel/liquid aluminium and its evolution during the bonding rolling process. The effects of wetting time and deformation on the diffusion layer and on the ...Studies were conducted on the interfacial microstructure of a steel/liquid aluminium and its evolution during the bonding rolling process. The effects of wetting time and deformation on the diffusion layer and on the bonding strength were examined. By means of electron microscopy and electron probe analysis, it was found that the diffusion layer is mainly composed of FeAI3. For a steel temperature of 250℃ and an aluminium temperature of 850 ~C, the diffusion layer was formed within 3 s, and the shear strength of the samples increased after 8 to 14 s. Although the interface was not damaged, it was deformed notably. For an aluminium temperature of 750℃ and a wetting time of 11 to 17 s, the shear strength of the interface remained high, but the interface was obviously broken during rolling, leading to reduced bonding strength.展开更多
The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in...The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in pipelines. Presently, the method of characteristics is widely used to solve classical hydraulic transient problems. However, when it is used to solve coupling hydraulic transient problems, excessive interpolation errors may be introduced into the results due to unavoidable multiwave interpolated calculations. To deal with the problem, a finite difference scheme based on the Steger- Warming flux vector splitting is proposed. A flux vector splitting scheme is established for the coupling hydraulic transient model of gas-liquid-solid three-phase mixed flow in the pipelines. The flux subvectors are then discretized by the Lax-Wendroff central difference scheme and the Warming-Beam upwind difference scheme with second-order precision in both time and space. Under the Rankine-Hugoniot conditions and the corresponding boundary conditions, an effective solution to those points located at the boundaries is developed, which can avoid the problem beyond the calculation region directly induced by the second-order discrete technique. Numerical and experimental verifications indicate that the proposed scheme has several desirable advantages including high calculation precision, excellent shock wave capture capability without false numerical oscillation, low sensitivity to the Courant number, and good stability.展开更多
It is found analytically that the parabolic radial profile of liquid velocity in cylindrical liquid-solid fluidized bed (LSFB) causes particles to circulate around some radial position. This is the main reason for liq...It is found analytically that the parabolic radial profile of liquid velocity in cylindrical liquid-solid fluidized bed (LSFB) causes particles to circulate around some radial position. This is the main reason for liquid-phase axial dispersions. The liquid-phase axial dispersion is depressed as the liquid velocity presents a flatter Bessel radial profile in a converging taper LSFB. The void fraction increases with axial distance in converging taper LSFB. The behavior produces less liquid-phase axial dispersion. Experimental results show good coincidence.展开更多
This study clarifies the seepage characteristics of complex fractured pressure-sensitive reservoirs,and addresses a common technological problem,that is the alteration of the permeability degree of the reservoir bed(k...This study clarifies the seepage characteristics of complex fractured pressure-sensitive reservoirs,and addresses a common technological problem,that is the alteration of the permeability degree of the reservoir bed(known to be responsible for changes in the direction and velocity of fluid flows between wells).On the basis of a new pressuresensitive equation that considers the fracture directional pressure-sensitive effect,an oil-gas-water three-phase seepage mathematical model is introduced,which can be applied to pressure-sensitive,full-tensor permeability,ultralow-permeability reservoirs with fracture-induced anisotropy.Accordingly,numerical simulations are conducted to explore the seepage laws for ultralow-permeability reservoirs.The results show that element patterns have the highest recovery percentage under a fracture angle of 45°.Accounting for the pressure-sensitive effect produces a decrease in the recovery percentage.Several patterns are considered:inverted five-seven-and nine-spot patterns and a cross-row well pattern.Finally,two strategies are introduced to counteract the rotation of the direction of the principal permeability due to the fracture directional pressure-sensitive effect.展开更多
基金supported by the National Natural Science Foundation Project of China(No.52201056)the funding of postdoctoral researchers in Anhui Province(No.2022B613)the College Excellent Young Foundation of Anhui Province(No.2023AH030029).
文摘The significance of water energy harvesting in the context of renewable energy utilization is steadily increasing.In response to the need for more efficient utilization of water resources,the nascent technology of liquid-solid triboelectric nanogenerators(TENGs)has emerged as a prospective candidate for the harvesting of water energy.Liquid-solid TENGs show several distinct advantages,including their lightweight,low cost,and efficient energy harvesting capabilities.Herein,this review presents a comprehensive exposition of the latest advancements in the field of liquid-solid TENGs.It delves into the underlying principles and different operational modes while also addressing the factors influencing its output performance from a multifaceted perspective.The factors comprise the intrinsic properties of friction materials,the chemical properties of the liquid,and the ambient temperature of liquid-solid TENGs.Furthermore,this review delineates the applications of liquid-solid TENGs as self-powered sensors in physics,chemistry,and biomedical contexts,as well as their applications in various other fields such as corrosion resistance,and so on.Last but not least,it concludes by providing a forward-looking on the future developmental trends of liquid-solid TENGs.
基金supported by the Space Application System of China Manned Space Program(No.KJZ-YY-NCL06)the National Natural Science Foundation of China(Nos.51974288,52174280)+1 种基金the Scientific Instrument Developing Project of the Chinese Academy of Sciences(No.YJKYYQ20210012)the IMR Innovation Fund(No.E255A901).
文摘Liquid-solid phase separation of permalloy in liquid Mg results in selectively dissolved Ni,which provides a unique opportunity for the design of immiscible heterogeneous composite materials and the comprehensive metal recycling of permalloy scraps.A guideline of the alloy design for the liquid-solid phase separation system was proposed.The effects of immersion temperature and time on the Ni extraction were studied by an experimental method.The diffusion behavior of Ni from the permalloy to liquid Mg and the microstructure evolution in the permalloy during the liquid-solid phase separation were discussed.The results show that the Ni in the permalloy was quickly extracted into the liquid Mg and formed an Mg-Ni alloy,while the other components such as Fe,Co,and Mn were held back in the phase-separated permalloy.The phase-separated permalloy with the solidified Mg exhibits a three-dimensional(3D)Fe/Mg bicontinuous composite structure.Furthermore,simple treatments were carried out for the reaction products such as the Fe/Mg bicontinuous composite and the Mg-Ni alloy,and the recycling strategies for functionalization of these treated reaction products were provided.A 3D porous Fe-based alloy with electromagnetic interference(EMI)shielding efficiency of 52 dB can be obtained if Mg is removed from the Fe/Mg bicontinuous composite.Instead of the complete separation of pure Ni from the recycled Mg-Ni alloy by vacuum distilling,the Mg-Ni alloy can be enriched into Mg2 Ni as an initial hydrogen storage material.
文摘The microstructures and properties of A1-45%Si alloy prepared by liquid-solid separation （LSS） process and spray deposition （SD） were studied. The results show that the size, shape and distribution of the primary Si phase have different influence on the properties of alloys. Comparing with the Si particles with irregular shape, fine size and continuous distribution in SD alloy, the primary Si phase in LSS alloy is sphere-like, coarse and surrounded by the continuous AI matrix. The microstructure features of LSS alloy are beneficial to the higher thermal conductivity and lower thermal expansion coefficient at room temperature. The fine Si particle in SD alloy is advantageous to improving the mechanical properties. The increasing rates of thermal expansion coefficient with temperature are influenced by the distribution of the Si particles, where a lower rate is obtained in SD alloy with continuous Si particles. The agreement of thermal expansion coefficient with the model in LSS alloy differs from that in the SD alloy because of the different microstructure characteristics.
基金Project (ZR2011EL023) supported by the Natural Science Foundation of Shandong Province,ChinaProject (12CX04057A) supported by the Fundamental Research Funds for the Central Universities,China
文摘Al-Ti diffusion couples were made by embedded technology and treated at the temperature between the melting points of Al and Ti. The microstructure evolution and growth mechanism of the Al-Ti DRZ were investigated. The result shows that the DRZ, the mixture of TiAl3 and Al, grows layer by layer along their chemical equilibrium zone. In the course, the growth interface moves toward the aluminum side. TiAl3 is the only new phase which forms earliest in the course of heat-treatment. The growth mechanism of the DRZ changes after the phase transition of titanium. Before the phase transition of titanium, the growth of the DRZ is controlled by the dissolution speed of the titanium to the molten aluminum, while after the phase transition of titanium, the growth is controlled by the chemical reaction speed of Al and Ti atoms, and consequently, its growth rate is greatly increased.
文摘The electronic packaging shell of high silicon carbide （54%SiC, volume fraction） aluminum-based composites was produced by liquid-solid separation technique. The characteristics of distribution and morphology of SiC as well as the shell’s fracture surface were examined by optical microscopy and scanning electron microscopy, and the thermo-physical and mechanical properties of the shell were also tested. The results show that Al matrix has a net-like structure while SiC is uniformly distributed in the Al matrix. The SiCp/Al composites have a low density of 2.93 g/cm^3, and its relative density is 98.7%. Thermal conductivity of the composites is 175 W/（·K）, coefficient of thermal expansion （CTE） is 10.3×10^-6 K-1 （25-400 ℃）, compressive strength is 496 MPa, bending strength is 404.5 MPa, and the main fracture mode is brittle fracture of SiC particles accompanied by ductile fracture of Al matrix.Its thermal conductivity is higher than that of Si/Al alloy, and its CTE matches with that of the chip material.
基金Supported by the National Natural Science Foundation of China(N.59831030).
文摘Erosion-corrosion of liquid-solid two-phase flow occurring in a pipe with sudden expansion in cross-section is numerically simulated in this paper. The global model for erosion-corrosion process includes three main components: the liquid-solid two-phase flow model, erosion model and corrosion model. The Eulerian-Lagrangian approach is used to simulate liquid-solid two-phase flow, while the stochastic trajectory model was adopted to obtain properties of particle phase. Two-way coupling effect between the fluid and the particle phase is considered in the model. The accuracy of the models is tested by the data in the reference. The comparison shows that the model is basically correct and feasible.
基金Project(cstc2015yykfC0001)supported by the National Engineering Research Centre for Magnesium Alloys,ChinaProject supported by State Key Laboratory of Mechanical Transmission of Chongqing University,China
文摘The liquid-solid compound casting technology was used to produce the AZ91D/0Cr19Ni9 bimetal composite without and with hot dipping aluminium, respectively. The influences of Al coating on microstructures and mechanical properties of AZ91D/0Cr19Ni9 interface were investigated. The results showed that the mechanical bonding was obtained between AZ91D and bare steel 0Cr19Ni9 where a gap existed at the interface; the metallurgical bonding was formed between AZ91D and Al-coated 0Cr19Ni9, which could be divided into two different intermetallic layers: layer Ⅰ was mainly composed of α-Mg+β-Mg17Al12 eutectic structure and a small amount of MgAl2O4, and layer Ⅱ mainly comprised of Fe2Al5 intermetallic compound. Furthermore, the hardness value of interface was obviously higher than that of AZ91D matrix, and the average hardness values of layers Ⅰ and Ⅱ were HV 158 and HV 493, respectively. The shear strength of AZ91D/Al-coated 0Cr19Ni9 interface was higher than that of AZ91D/bare 0Cr19Ni9 interface, which confirmed that Al coating could improve the adhesive strength between AZ91D and 0Cr19Ni9 during liquid-solid compound casting process.
基金supported by National Natural Science Foundation of China(Grant No.51876221No.51776225)+1 种基金High-end Foreign Expert Introduction Project(G20190001270B18054)。
文摘This work aims to investigate the erosion-corrosion behavior of Q235B steel in liquid-solid two-phase flows.The weight loss rate,surface morphology and electrochemical parameters of Q235B steel at different temperatures(20℃,30℃,40℃)and flow velocities(6 m/s,7 m/s,8 m/s,9 m/s,10 m/s)were studied separately.The results show that the weight loss rate of Q235B steel specimens after erosion-corrosion increases with increasing flow velocity and temperature.For the erosion-corrosion process,the corrosion rates of specimens increase with increasing flow velocity.The results of surface morphology show that the circular pits with clear edges are distributed randomly over specimen surface at low flow velocity,but the pit edge becomes vague at high flow velocity.With temperature increasing,the erosion-corrosion damage became serious as shown by the aggregation of large and small pits on specimen surface.The working mechanism of erosion-corrosion is found to vary with flow velocity and temperature.The relationships among erosion-corrosion components are quantitatively represented and show that synergy dominates the progress of material loss.Corrosion enhances erosion that is a dominant component in the synergy.The inactions of erosion-corrosion can be described by"synergistic"and"additive"behavior.The results show that"additive"effect becomes more significant with increasing flow velocity but decreases with increasing temperature,while"synergistic"effect is not sensitive to flow velocity and temperature.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51879159 and 52131102)the National Key Research and Development Program of China(Grant No.2019YFB1704200)。
文摘In the process of deep-sea mining,the liquid-solid flows in the vertical transportation pipeline are very complex.In the present work,an in-house solver MPSDEM-SJTU based on the improved MPS and DEM is developed for the simulation of hydraulic conveying.Firstly,three examples including the multilayer cylinder collapse,the Poiseuille flow and two-phase dam-break are used to validate the precision of the DEM model,the pipe flow model and MPS-DEM coupling model,respectively.Then,the hydraulic conveying with coarse particles in a vertical pipe is simulated.The solid particle distribution is presented and investigated in detail.Finally,the coupling method is successfully applied for the simulation of the liquid-solid flows in a vertical pipe with rotating blades,which shows the stability of the solver under rotating boundary conditions.This fully Lagrangian model is expected to be a new approach for analyzing hydraulic conveying.
基金Project(50972121) supported by the National Natural Science Foundation of China
文摘A damage prediction method based on FE simulation was proposed to predict the occurrence of hot shortness crocks and surface cracks in liquid-solid extrusion process. This method integrated the critical temperature criterion and Cockcroft ＆ Latham ductile damage model, which were used to predict the initiation of hot shortness cracks and surface cracks of products, respectively. A coupling simulation of deformation with heat transfer as well as ductile damage was carried out to investigate the effect of extrusion temperature and extrusion speed on the damage behavior of Csf/AZ91D composites. It is concluded that the semisolid zone moves gradually toward deformation zone with the punch descending. The amplitude of the temperature rise at the exit of die from the initial billet temperature increases with the increase of extrusion speed during steady-state extrusion at a given punch displacement. In order to prevent the surface temperature of products beyond the incipient melting temperature of composites, the critical extrusion speed is decreased with the increase of extrusion temperature, otherwise the hot shortness cracks will occur. The maximum damage values increase with increasing extrusion speed or extrusion temperature. Theoretical results obtained by the Deform^TM-2D simulation agree well with the experiments.
文摘The atomic behavior of liquid-solid mixed-phase nanofluid flows inside nanochannels is investigated by a molecular dynamics simulation （MDS）. The results of visual observation and statistic analysis show that when the nanoparticles reach near each other, the strong interatomic force will make them attach together. This aggrega- tion continues until all nanoparticles make a continuous cluster. The effect of altering the external force magnitude causes changes in the agglomeration rate and system enthalpy. The density and velocity profiles are shown for two systems, i.e., argon （Ar）-copper （Cu） nanofluid and simple Ar fluid between two Cu walls. The results show that using nanopar- ticles changes the base fluid particles ordering along the nanochannel and increases the velocity. Moreover, using nanoparticles in simple fluids can increase the slip length and push the near-wall fluid particles into the main flow in the middle of the nanochannel.
基金Foundation item： Project（2011BAB09B01） supported by the National Science and Technology Support Program of China Project（cstc2013jcyjA30006） supported by Chongqing Science ＆ Technology Commission, China Project（K J130412） supported by Chongqing Education Commission, China
文摘Previous studies have indicated that piping erosion greatly threatens the safe operation of various hydraulic structures. However, few mathematical models are available to perfectly describe the erosion process due to the complexity of piping. The focus of the present work is to propose a new fluid solid coupling model to eliminate the shortcomings of existing work. A 'pseudo-liquid' assumption is suggested to simulate the particle movement in the erosion process. Then, based on the mass and momentum conservations of the moving particles and flowing water, a new two-flow model is established by using the continuity equations and motion equations. In the model, the erosion rate of soil is determined with a particle erosion law derived from tests results of STERPI. And ERGUN's empirical equation is used to determine the interaction forces between the liquid and the solid. A numerical approach is proposed to solve the model with the finite volume method and SIMPLE algorithm. The new model is validated with the tests results of STERPI. And the soil erosion principles in piping are also explored.
基金supported by Department of Energy and Process Engineering,Norwegian University of Science and TechnologyInstitute for Energy Technology and SINTEF through the FACE(Multiphase Flow Assurance Innovation Center) Project
文摘Particle based methods can be used for both the simulations of solid and fluid phases in multiphase medium, such as the discrete-element method for solid phase and the smoothed particle hydrodynamics for fluid phase. This paper presents a computational method combining these two methods for solid-liquid medium. The two phases are coupled by using an improved model from a reported Lagrangian-Eulerian method. The technique is verified by simulating liquid-solid flows in a two-dimensional lid-driven cavity.
基金Supported by Korea Institute of Energy Technology Evaluation and Planning (KETEP)GTL Technology Development Consortium (Korean National Oil Corp., Korea Gas Corp., Daelim Industrial Co. and Hyundai Engineering Co.) under "Energy Efficiency & Resources Programs" of the Ministry of Knowledge Economy, Republic of Korea
文摘Heat transfer characteristics between the immersed heater and the bed content were studied in the riser of a liquid-solid circulating fluidized bed, whose diameter and height were 0.102 m (ID) and 2.5 m, respectively. Effects of liquid velocity, particle size, surface tension of liquid phase and solid circulation rate on the overall heat transfer coefficient were examined. The heat transfer coefficient increased with increasing particle size or solid circulation rate due to the higher potential of particles to contact with the heater surface and promote turbulence near the heater surface. The value of heat transfer coefficient increased gradually with increase in the surface tension of liquid phase, due to the slight increase of solid holdup. The heat transfer coefficient increased with the liquid velocity even in the higher range, due to the solid circulation prevented the decrease in solid holdup, in contrast to that in the conventional liquid-solid fluidized beds. The values of heat transfer coefficient were well correlated in terms of dimensionless groups as well as operating variables.
基金The authors would like to gratefully acknowledge the financial support of National Natural Science Foundation of China(Grant No.51305345)Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2014JQ6228).
文摘Liquid-solid extrusion directly following vacuum infiltration(LSEVI)is an infiltration-extrusion integrated forming technique,and transverse weld between upper residual magnesium alloy and magnesium matrix composites is a common internal defect,which can severely reduce the yield of composite products.To improve current understanding on the mechanism of transverse welding phenomenon,a thermo-mechanical numerical model of LSEVI for magnesium matrix composites was developed.The formation of transverse weld during extrusion was visualized using finite element simulation method,and the formation mechanism was discussed from the aspect of velocity field using a point tracking technique.The simulation results were verified by the experimental results in term of weld shape.
基金Project supported by the National Natural Science Foundation of China (No. 10472036).
文摘This paper employs the integral-averaged method of thickness to approximate the periodical flows in a piezoelectric micropump, with a shallow water equation including nonlinearity and viscous damp presented to characterize the flows in micropump. The finite element method is used to obtain a matrix equation of fluid pressure. The fluid pressure equation is combined with the vibration equation of a silicon diaphragm to construct a liquid-solid coupled equation for reflecting the interaction between solid diaphragm and fluid motion in a micropump. Numerical results of a mode analysis of the coupled system indicate that the natural frequencies of the coupled system are much lower than those of the non-coupled system. The influence of additional mass and viscous damp of fluid on the natural frequencies of the coupled system is more significant as the pump thickness is small. It is found that the vibration shape functions of silicon diaphragm of the coupled system are almost the same as those of the non-coupled system. This paper also gives the first-order amplitude-frequency relationship of the silicon diaphragm, which is necessary for the flow-rate-frequency analysis of a micropump.
文摘Studies were conducted on the interfacial microstructure of a steel/liquid aluminium and its evolution during the bonding rolling process. The effects of wetting time and deformation on the diffusion layer and on the bonding strength were examined. By means of electron microscopy and electron probe analysis, it was found that the diffusion layer is mainly composed of FeAI3. For a steel temperature of 250℃ and an aluminium temperature of 850 ~C, the diffusion layer was formed within 3 s, and the shear strength of the samples increased after 8 to 14 s. Although the interface was not damaged, it was deformed notably. For an aluminium temperature of 750℃ and a wetting time of 11 to 17 s, the shear strength of the interface remained high, but the interface was obviously broken during rolling, leading to reduced bonding strength.
基金supported by the Natural Science Foundation Project of CQ CSTC (No. 2010BB7421)
文摘The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in pipelines. Presently, the method of characteristics is widely used to solve classical hydraulic transient problems. However, when it is used to solve coupling hydraulic transient problems, excessive interpolation errors may be introduced into the results due to unavoidable multiwave interpolated calculations. To deal with the problem, a finite difference scheme based on the Steger- Warming flux vector splitting is proposed. A flux vector splitting scheme is established for the coupling hydraulic transient model of gas-liquid-solid three-phase mixed flow in the pipelines. The flux subvectors are then discretized by the Lax-Wendroff central difference scheme and the Warming-Beam upwind difference scheme with second-order precision in both time and space. Under the Rankine-Hugoniot conditions and the corresponding boundary conditions, an effective solution to those points located at the boundaries is developed, which can avoid the problem beyond the calculation region directly induced by the second-order discrete technique. Numerical and experimental verifications indicate that the proposed scheme has several desirable advantages including high calculation precision, excellent shock wave capture capability without false numerical oscillation, low sensitivity to the Courant number, and good stability.
基金Supported by the National Natural Science Foundation of China(No.29576251)
文摘It is found analytically that the parabolic radial profile of liquid velocity in cylindrical liquid-solid fluidized bed (LSFB) causes particles to circulate around some radial position. This is the main reason for liquid-phase axial dispersions. The liquid-phase axial dispersion is depressed as the liquid velocity presents a flatter Bessel radial profile in a converging taper LSFB. The void fraction increases with axial distance in converging taper LSFB. The behavior produces less liquid-phase axial dispersion. Experimental results show good coincidence.
基金This work is financially supported by the National Natural Science Foundation Project(No.51374222)National Major Project(No.2017ZX05032004-002)+2 种基金the National Key Basic Research&Development Program(No.2015CB250905)CNPC’s Major Scientific and Technological Project(No.2017E-0405)SINOPEC Major Scientific Research Project(No.P18049-1).
文摘This study clarifies the seepage characteristics of complex fractured pressure-sensitive reservoirs,and addresses a common technological problem,that is the alteration of the permeability degree of the reservoir bed(known to be responsible for changes in the direction and velocity of fluid flows between wells).On the basis of a new pressuresensitive equation that considers the fracture directional pressure-sensitive effect,an oil-gas-water three-phase seepage mathematical model is introduced,which can be applied to pressure-sensitive,full-tensor permeability,ultralow-permeability reservoirs with fracture-induced anisotropy.Accordingly,numerical simulations are conducted to explore the seepage laws for ultralow-permeability reservoirs.The results show that element patterns have the highest recovery percentage under a fracture angle of 45°.Accounting for the pressure-sensitive effect produces a decrease in the recovery percentage.Several patterns are considered:inverted five-seven-and nine-spot patterns and a cross-row well pattern.Finally,two strategies are introduced to counteract the rotation of the direction of the principal permeability due to the fracture directional pressure-sensitive effect.
